• Product Detail
• Question and Answer
• Customer feedback

Bedlam Product Brochure

Bed Bugs Spray

The Bedlam Bedbug Insecticide Spray is an highly recommended product for bed bug control. Bedlam Bedbug Insecticide Spray is used to eliminate Bedbugs, Lice, Dust Mites, and Fleas and Ticks on contact. Bedlam Bedbug Insecticide Spray is a residual aerosol spray which will leave a residual to kill future pests. Bedlam Bedbug Insecticide Spray can be used indoors in areas for crack and crevices, floorboards, walls, headboards, on cracks and crevices of mattress and spring boxes, also on cracks and crevices of furniture.

Active Ingredient: 3-Phenoxybenzyl-2, 2-dimethyl-3-cyclopropanecar boxylate- 0.40%, N-Octyl bicycloheptene dicarboximide- 1.60%

Target pests: Bed Bugs, Adult Lice and Nymphs, Ticks, Fleas, Dust Mites

Best Practices When Using Bedlam

Test the surface first
Bedlam will not stain water-safe fabrics and surfaces. To make sure a surface is
water-safe, spray in an inconspicuous area to test for possible staining or discoloration.
Check after spray has dried; if staining has not occurred, proceed to spray area to
be treated.

Application tips
Shake well before each use. Vacate room after treatment and ventilate before
reoccupying. Spray only those garments, parts of bedding, including mattresses
and furniture that cannot be either laundered or dry-cleaned. Allow sprayed articles
and surfaces to dry thoroughly before using or replacing bedding.
Do not allow children or pets to contact treated areas until surface is dry.

Use Bedlam as part of an IPM program
Use Bedlam in conjunction with other products labeled for the control of bed bugs such
as Onslaught® Microencapsulated Insecticide for a comprehensive bed bug program.

Effective Bed Bug Application
For best results, in addition to treatment with Bedlam Insecticide, pest control
professionals should include additional tactics such as those listed below.

• Conduct a thorough inspection to locate the infestation
• Be certain to look in any harborages that offer the bed bug isolation and
  darkness, such as:
• Behind wall hangings, pictures and mirrors
• Behind electrical switch plates
• In electronics such as radios and alarm clocks
• Under rugs and floor coverings
• In all nooks and crannies of nightstands
• All parts of beds – headboards, footboards, mattress, box springs, frame
• Remove and wash all bedding. Allow surfaces to dry thoroughly before using
  or replacing bedding.
• Reduce and remove clutter from the room
• Dispose of infested items that can be discarded
• Encase or bag articles that may be infested, but will not be laundered or discarded
  • Remove bedding, clothing and other items that may be laundered or dry cleaned
  • Wash and dry on “high heat” dryer setting to achieve a temperature of 185°F

Registered States: AL, AZ, AR, CA, CO, CT, DE, DC, FL, GA, HI, ID, IN, IA, KS, KY, LA, ME, MH, MD, MA, MI, MN, MS, MO, MT, NV, NH, NJ, NY, NC, ND, OH, OK, OR, PA, RI, SC, SD, TN, TX, UT, VT, VA, WA, WV, WY

Bedlam Insecticide is specially designed to control bed bugs, lice and dust mites. Bedlam is an aerosol product that may be used to treat fabric, garments, and bedding materials, as well as for crack and crevice treatments on and around baseboards, floorboards, headboards, and walls.

• Bedlam kills on contact and provides residual control.

• Bedlam is water-based and non-irritating - may be used on bedding and fabric.

• Bedlam will not stain water-safe fabrics and surfaces.

• Bedlam may be used in the home, and non-food areas of hotels, apartments, dorms, healthcare facilities, schools, kennels, and other commercial sites.

TO KILL BEDBUGS with Bedlam Bed bug Insecticide Spray:

Apply as a spot treatment to cracks and crevices, around baseboards, floorboards, headboards, and walls. First thoroughly clean and air mattresses and springs. Then spot treat only areas that may harbor pests. On mattresses concentrate on tufts, folds, and seams. Repeat as necessary.

TO KILL LICE with Bedlam Bed bug Insecticide Spray:

Spray in an inconspicuous area to test for possible staining or discoloration. Inspect again after drying, and then proceed to spray entire area to be treated. Hold container upright with nozzle away from you. Depress valve and spray from a distance of 8 to 10 inches. Spray each square foot for 5 seconds or until damp. Spray only those garments, parts of bedding, including mattresses and furniture that cannot be either laundered or dry-cleaned. Allow sprayed articles to dry thoroughly before use.

TO KILL TICKS AND FLEAS with Bedlam Bed bug Insecticide Spray:

Spray around beds, furniture and pet's habitat. Spray pet sleeping quarters, bedding, floor and floor covering where pets are kept. Repeat as necessary. Use only a recommended pet spray on pets.

TO KILL DUST MITES with Bedlam Bed bug Insecticide Spray:

First thoroughly vacuum entire room concentrating on areas where mites congregate: such as mattresses, box springs, headboards, walls, floors, carpeting, and baseboards. Then spray surfaces until damp. On mattresses allow spray to dry thoroughly before replacing bedding.

Please refer to and follow the information on Bedlam's product label.

Do You Have a Question about this Product? Ask Our Experts!