Bora-Care Product Label / Bora-Care Material Safety Data Sheet (MSDS)

Mold-Care Product Label

Bora-Care with Mold-Care

Bora-Care with Mold-Care Mold-Care is the industry's leading weapon against mold. It acts as a surface protectant, killing all forms of fungi, while sanitizing and disinfecting the treated area. Bora-Care is the industry' s leading borate-based wood preservative, rendering treated wood impervious to termites and other wood destroying insects, as well as wood decay fungi. It actually penetrates into the wood where it delivers residual protection for years. When used together, Bora-Care and Bora-Care with Mold-Care create a highly effective, residual solution to insects and mold. And Bora-Care with Mold-Care comes with a 25-year warranty for you as the pest control company. (There are guidelines to qualify for the warranty, so read the BoraShield warranty section to learn details.)

Active Ingredient: BORA-CARE - Disodium Octaborate Tetrahydrate 40%, MOLD-CARE - Didecyl dimethyl ammonium chloride 80%

Size: 1 Gallon

Yield and Mixing : Mix one gallon of Bora-care with Mold-care with five gallons of hot or warm water. One gallon of Bora-care with Mold-care can approximately treat 3600 liear feet of 2x4 lumber.

Target Pests: Mold, decay fungi, wood rot, termites, powderpost beetles, wood-destroying insects.

Apply to whole house or high-risk areas

A Bora-Care with Mold-Care treatment is a one-time preventative application that can be completed either during the new construction phase or applied post-construction in high-risk areas such as kitchens, bathrooms and crawl spaces.

Provides residual protection

Bora-Care with Mold-Care diffuses into wood and remains there for as long as the wood is in service, providing years of residual protection.

Creates a buffer zone

In an untreated home, flood or water damage can cause mold to grow within a week. The mold can be as devastating as the flood itself. Even in catastrophic conditions, Mold-Care will act as a retardant to mold growth, giving the homeowner more time to recover. It also disinfects and sanitizes, critical necessities in a water-damage situation.

Inhibits the growth of mold

Specifically designed to work with Bora-Care, Mold Care prevents the establishment of dry rot, wet rot and mold. Bora-Care adds additional residual protection against decay fungi and insect infestation. Bora-Care with Mold-Care can be applied to bare wood, plywood, particleboard, drywall and OSB. And it's the best approach you can take against mold. Bora-Care with Mold-Care is designed to penetrate wood; it doesn't just remain on the surface, but is absorbed into the interior of wood to protect it from the inside out.

Please refer to and follow the information on Bora-care with Mold-care product label.