• Product Detail
• Question and Answer
• Customer feedback

Product Label / Material Safety Data Sheet (MSDS)

Cyper WP

Cyper WP along with Demon WP and Cynoff WP are considered long lasting residual insecticides, lasting up to 3 months. Cyper WP is an odorless product and can be used indoors as well as outdoors. Due to the contain of the material it is recommended that the mixed product is shaken often as it is being sprayed. Be extra careful when spraying Cyper WP around dark furniture and surface for it will leave a stain. Cyper WP uses a knock down method to control pest, meaning the minute the pest comes into contact with Cyper WP it will die. When using Cyper WP we recommend that a sprayer like Chaplin 1- 2 Gallon is used to mix and spray the product.

Useful Tips You May Need to Know

Apply Cyper WP with 1 Gallon Sprayer in order to maximize the treatment result. Apply Cyper WP to outside of foundation such as doors, windows, cracks and crevices.

Active Ingredients: Cypermethin1(+)a-cyano-(3-phenoxyphenyl)methyl(+)-cis, trans-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropanecarboxylate 40.0%

Size: 1 lb. jar

Yield and Mixing: 1 lb. Jar makes upto 48 gallons of solution.
For ants, aphids, boxelder bugs, centipedes, cockroaches (maintenance), crickets, earwigs, beetles, fleas, flies, mites, millipedes, mosquitoes, pillbugs, silverfish, sowbigs, termites, mix 1 scoop of Cyper WP with 1 gallon of water; for bees, carpenter ants, cockroaches (clean-out), fire ants, scorpions, spiders, ticks, wasps, mix 2 scoops of Cyper WP with 1 gallion of water.

States Registered: AL, AZ, AR, CA, CO, CT, DC, DE, FL, GA, ID, IL, IN, IA, KS, KY, LA, ME, MD, MA, MI, MN, MS, MO, MT, NE, NV, NH, NJ, NM, NC, ND, OH, OK, OR, PA, RI, SC, SD, TN, TX, UT, VT, VA, WA, WI, WV, WY

Target Pests: Ants, Aphids, Assassin Bugs, Boxelder Bugs, California Oakworm, Centipedes, Chiggers, Cockroaches, Crickets, Earwigs, Elm Leaf Beetles, Firebrats, Fleas, Flies, Millipedes, Mites, Mosquitoes, Pillbugs, Silverfish, Sowbugs, Termites, Ants, Bees, Carpenter Ants, Carpenter Bees, Cockroaches, Fire Ant, Scorpions, Sod Webworms, Spiders, Ticks, Wasps.

Description of Cyper WP:

Cockroaches, Spiders, Crickets, Scorpions, Silverfish, Ticks and Firebrats: Apply Cyper WP as a coarse, low pressure treatment to areas where these pests hide, such as baseboards, corners,storage areas, closets, around water pipes, doors and windows, attics and eaves, cabinets, sinks, furnaces, stoves, behind and under refrigerators, the underside of shelves, drawers and similar areas. Pay particular attention to cracks and crevices.

Ants: Apply Cyper WP to any trails, around doors and windows and similar areas where ants (including carpenter ants) maybe found. Apply perimeter barrier treatments to prevent infestation as described below.

Bees, Carpenter Bees and Wasps: Application to nests should be made in late evening when insects are at rest. Thoroughly treat nest and entrance, surfaces and surrounding areas where these insects alight.

Assassin Bugs, Boxelder Bugs, Sowbugs, Pillbugs, Millipedes, Elm Leaf Beetle and Centipedes: Apply Cyper WP around doors and windows and similar areas where these, or similar perimeter pests, may be found or where they may enter premises. Treat baseboards, storage areas and other locations. Apply barrier treatments to prevent infestation as described below.

Bees, Flies, Mosquitoes and Wasps: Apply Cyper WP directly to walls, ceilings, window screens and other resting areas as a residual surface treatment. May be used inside residential buildings as well as in and around carports, garages and storage sheds.

Termites Above Ground: For control of termites, subterranean aerial colonies, Formosan aerial colonies or drywood termites in localized areas of infested wood structures, apply a 0.1% emulsion to voids and galleries in damaged wood and in spaces between wooden members of a structure and between wood and foundations where wood is vulnerable. Application of Cyper WP may be made to inaccessible areas by drilling, and then injecting the emulsion with a crack and crevice injector into the damaged wood or void spaces. Application of Cyper WP to attics, crawl spaces, unfinished basements, or man-made voids may be made with a coarse fan spray of 0.1% emulsion to control workers and winged reproductive forms of termites in mud shelter tubes. This type of application is not intended to be a substitute for soil treatment for extensive infestation of drywood termites or other wood-infesting insects. This treatment is intended to kill localized infestations of workers and winged reproductive forms of termites. For termites active inside trees, utility poles and/or fence posts, drill to find the interior infested cavity and inject 0.1% emu lsion using treatment tool with a splash back guard. Termite carton nests in trees or building voids may be injected with 0.25% -0.50% emulsion using a pointed injection tool. Multiple injection points to varying depths may be necessary. It is desirable to physically remove carton nest material from building voids when such nests are found.

Food-Handling Establishments (For Use in Non-Food Areas Only): Places other than private residences in which food is held, processed, prepared, or served: Cyper WP Insecticide may be used as a general spot or crack and crevice treatment in nonfood areas of food handling establishments. Examples of nonfood areas include garbage rooms, lavatories, floor drains (to sewers), entries and vestibules, offices, locker rooms , machine rooms, boiler rooms, garages, mop closets, and storage (after canning or bottling). Do not use Cyper WP Insecticide in food areas of food handling establishments, restaurants or other areas where food is commercially prepared, processed or served. Food areas include areas where food is commercially prepared or processed, areas for receiving, storage, packing (canning, bottling, wrapping, boxing), preparing, edible waste storage and enclosed processing systems (mills, dairies, edible oils, syrups). Serving areas (when food is exposed and facility is in operation) also would be considered a food area.

Indoor Residential Use: Cyper WP Insecticide may be used as a general spot or crack and crevice treatment in the home. All food processing surfaces and utensils should be covered during treatment or thoroughly washed before use. Exposed food should be covered or removed.

Outdoor Surfaces

For control of ants, aphids, assassin bugs, boxelder bugs, bees, centipedes, chiggers, chinch bugs, cockroaches, crickets, earwigs, firebrats, fleas, flies, millipedes, mites, mosquitoes, pillbugs, scorpions, silverfish, sowbugs, spiders, ticks, wasps, and other similar perimeter insect pests. Apply Cyper WP with either hand or power application equipment as a residual treatment to surfaces of buildings, porches, screens, window frames, eaves, patios, refuse dumps, garages and other similar areas where these pests are found. Also, may be used as a spot treatment for applications to lawns in landscaped areas in and around residential, commercial, institutional and industrial buildings, and similar areas where these insect pests are active.

Fire Ants (Mounds): For individual fire ant mounds, apply Cyper WP Insecticide as a drench. Gently sprinkle (watering can) a total of one gallon over the surface of mounds up to 12 inches in diameter and two gals. for larger mounds. Thoroughly wet mound and surrounding area. Treat new mounds as they appear. Pressurized sprays may disturb the ants and cause migration. If possible, applications should be made on warm days after recent rainfall. All colonies in the vicinity should be treated, including those that have not yet constructed a mound.

Scorpions: Treat and remove accumulations of lumber, firewood and other materials which serve as harborage sites. Apply Cyper WP a coarse spray treatment to the point of drip.

Carpenter Ants: Apply Cyper WP as a coarse wet spray treatment, but avoid runoff around door frames, windows and similar areas where these ants enter premises or hide.

Sod Webworms: Apply Cyper WP as a spot treatment when pests first appear (do not apply as a broadcast spray); retreat when needed. Delay watering or mowing the treated area for 12-24 hrs. after treatment. Use 1-2 gallons of solution per1000 sq. ft. when making application.

Barrier Treatment: To help prevent infestation of buildings, apply Cyper WP to a band of soil and vegetation 6-10 ft. wide around and adjacent to the building. Also, treat the building foundation to a height of 2-3 ft. where pests are active and may find entrance. Apply Cyper WP as a coarse spray treatment to thoroughly and uniformly wet the foundation and/or band area, using 1-5 gals. of treatment solution applied to 800-1600 sq. ft.

Please refer to and follow the directions on the Cyper WP product label.

Do You Have a Question about this Product? Ask Our Experts!