• Product Detail
• Question and Answer
• Customer feedback

Product Label / Material Safety Data Sheet (MSDS)

Demand CS Brochure

Demand CS

For superior perimeter protection of general and nuisance pests including mosquitoes, ants, flying insects and spiders, harness the power of iCAP Technology with Demand CS. With an unique capsule suspension of the active ingredient, lambda-cyhalothrin. Demand achieves knockdown of most pests within 15 minutes, and delivers unsurpassed residual that lasts several months, even at extremely low use rates. Demend CS's iCAP technology is applied to surfaces at a rate of 10,000 encapsulated microcaps per square inch. Demand CS's microcaps maintain their shape longer, ensuring that the powerful formula stays on the surfaces where it's needed, even with exposure to outdoor conditions. Extremely low use rate of lamda-cyhalothrin, minimizing the amount of active ingredient introduced into the environment. Demand CS can be applied directly to foliage of plants, trees, shrubs, turf and other landing or harbor areas without damaging them. Demands CS controls over 20 pest species, including seasonal nuisance pests.

Useful Tips You May Need to Know

Apply with one gallon sprayer for easier and more effective application.

Cyonara 9.7 - same active ingredient for less cost.

Demand CS is microencapsulated insecticide

Demand CS is one of the best if not the best you can buy today this will last you about 90 days after every time you use

Tank mixes - Demand CS is compatible with almost all labeled insecticides, synergists, and additives. When tank mixing Demand CS with another product, always add Demand CS last.

Residual - Demand CS is photo-stable. Trials compared Demand CS against Talstar SC, Suspend SC, and Tempo SC Ultra by spraying on porous wood. The treated surfaces were subjected to outdoor sunlight during a 5 week period and brought indoors for residual testing against fire ants. Results showed Demand CS was superior to the 3 competitors products relative to speed of knockdown.

Advantages of Demand CS

• iCAP technology is applied to surfaces at a rate of 10,000 encapsulated microcaps per square inch.
• Microcaps maintain their shape longer, ensuring that the powerful formula stays on the surfaces where it¤?¤±¤?¤? needed, even with exposure to outdoor conditions.
• Extremely low use rate of lamda-cyhalothrin, minimizing the amount of active ingredient introduced into the environment.
• Can be applied directly to foliage of plants, trees, shrubs, turf and other landing or harbor areas without damaging them.
• Controls over 20 pest species, including seasonal nuisance pests.

Active Ingredient: Lambda-cyhalothrin1[1#945;(S*),3#945;(Z)]-(plusmn;)-cyano-(3-phenoxyphenyl)methyl-

3-(2-chloro-3,3,3-trifluoro-1-propenyl)-2,2-dimethylcyclopropanecarboxylate -9.7%

Size: 8 oz.

Yield: One 8 oz. Demand CS makes upto 100 gallons of solution.

Target Pests: Ants, Bedbugs, Bees, Beetles, Boxelder Bugs, Carpenter Bees, Carpet Beetles, Centipedes, Cigarette Beetles, Clover Mites, Cockroaches, Confused Flour Beetles, Crickets, Earwigs, Firebrats, Fleas, Flies, Lesser Grain Borers, Millipedes, Mosquitoes, Red Flour Beetles, Rice Weevils, Saw-toothed Grain, Beetles, Silverfish, Sowbugs, Spiders, Termites (above ground only), Ticks, Wasps, Cockroaches, Crickets, Flies, Litter Beetles, Mosquitoes, Pillbugs, Scorpions, Spiders, Spider Mites, Ticks.

Registered States: AL, AZ, AR, CA, CO, DE, DC, FL, GA, HI, ID, IL, IN, IA, KS, KY, LA, ME, MH, MD, MA, MI, MN, MS, MO, MT, NE, NV, NH, NJ, NM, NC, ND, OH, OK, OR, PA, RI, SD, TN, TX, UT, VA, WA, WV, WI, WY *Must use an aerosol or Sterifab for bed bug control in New York instead.

Kill Ants with Demand CS:

Apply to any trails around doors and windows and other places where ants may be found. For best results, locate and treat nests. Where ants are trailing inside, apply as a residual surface treatment to active areas such as baseboards, corners, around pipes, in and behind cabinets, behind and under refrigerators, sinks, furnaces and stoves, cracks and crevices. When combining baits and residual surface insecticides, apply surface insecticides in cracks and crevices, along baseboards, and infested surfaces and outside barrier treatments. Treatment of perimeter landscaping can reduce honeydew-producing insects and limit this ant food source. Use baits in other areas that are untreated by residual insecticides.

Kill Cockroaches, Crickets, Earwigs, Firebrats, Silverfish, and Spiders with Demand CS:

Apply as a coarse, low pressure spray to areas where these pests hide, such as baseboards, corners, storage areas, closets, around water pipes, doors and windows, attics and eaves, cabinets, behind and under refrigerators, furniture, sinks, furnaces and stoves, the underside of shelves, drawers and similar areas. Pay particular attention to cracks and crevices.

Kill Bedbugs with Demand CS:

Recommend cleaning of floors and surfaces by vacuuming. Apply as a coarse, low-pressure spray to harborage areas including crevices, baseboards, loose plaster, behind bed frames and headboards, beneath beds and furniture, and to bedsprings and bed frames. Do not apply to furniture surfaces or mattresses where people will be laying or sitting. Infested bedding should not be treated, but should be removed, placed in sealed plastic bags, and taken for laundering and drying at high temperatures.

Kill Bees, Flies, Mosquitoes, and Wasps with Demand CS:

Apply directly to walls, ceilings, window screens, and other resting areas as a residual surface treatment. May be used inside residential buildings as well as in and around carports, garages, and storage sheds; also see Outdoor Surfaces Use. Use caution when treating nests of stinging insects as Demand CS Insecticide does not provide instant knockdown. Protective equipment for the applicator may be required. For best results, treat bee, wasp and hornet nests late in the day when most insects will be present. Allow 2-3 days for colony to die and retreat if necessary. For mosquito control, apply as a general structural perimeter spray to landscape plantings, turf, and building foundations to control mosquitoes. Yards or other frequented areas enclosed by landscaping can benefit from the creation of a mosquito barrier to reduce invading mosquitoes by the treatment of perimeter vegetation. For best results, apply Demand CS Insecticide at recommended rates in 2-5 gals. of water per 1,000 sq. ft. Higher volumes applied result in better coverage and, as a rule, will improve control. Application to vegetation away from structures may require additional certification, e.g. in turf or ornamental categories. Consult your state regulatory agency for requirements.

Kill Carpenter Bees with Demand CS:

Apply coarse spray to thoroughly wet wood surfaces where bees have been previously active or to provide protection against further damage. Apply early in the spring to prevent bees from invading wood. When bees have infested wood, surface applications can help control embedded larvae and bees that emerge from the wood. Applications can be made on a monthly basis to maintain protection of treated areas.

Kill Pantry Pests (i.e., Carpet beetle, Cigarette beetle, Confused flour beetle, Lesser grain borer, Red flour beetle, Rice weevil, and Saw-toothed grain beetle) with Demand CS:

Apply to cupboards, shelving, and storage areas. Remove all utensils, uncovered foodstuffs (or any having original package opened), and shelf paper before making application. Allow treated surfaces to dry and cover shelves with clean paper before replacing any utensils, foodstuff, or other items. Any foodstuff accidentally contaminated with treatment solution should be destroyed.

Kill Boxelder Bugs, Centipedes, Millipedes, Pillbugs, and Sowbugs with Demand CS:

Apply around doors and windows and other places where these pests may be found or where they may enter premises. Treat baseboards, storage areas, and other locations. Apply barrier treatments to prevent infestation as described below.

Kill Fleas and Ticks with Demand CS:

To control nuisance fleas and ticks (e.g. dog ticks) apply to kennels, yards, runs, and other areas where pets may frequent. For best coverage to control ticks, apply using a coarse fan spray to vegetation brush, branches, rock walls, and other areas near habitation where ticks may harbor or frequent. Treat entire area rather than making spot treatments, and retreat as necessary to maintain control. Do not apply to pasture or cropland, and do not allow animals and people access to treated areas until the deposit has dried. Applications can be made on a monthly basis, beginning in the spring and can continue until frost to control both larvae and adult ticks. Also, treat pest with a product registered for flea and tick control.

Kill Cluster Flies with Demand CS:

Apply in late summer or early fall before flies are observed alighting on surfaces. Apply thoroughly on siding, under eaves, and around windows and doors, paying particular attention to southfacing surfaces. Apply just enough dilution to adequately cover the area without excessive dripping or runoff. Volume can vary depending on the surface type treated. Heavy precipitation prior to frost may require retreatments to maintain protection. In winter and spring when flies become active and are emerging, interior crack and crevice and void treatments can help reduce the infestation, along with ULV or general surface application in infested attics or unoccupied lofts.

Kill Litter Beetles (Darkling, Hide, and Carrion Beetles) and Flies In Animal Housing (Such As Poultry Houses) with Demand CS:

To control adult litter beetles, apply Demand CS Insecticide to walls and floors at cleanout, before reintroduction of animals. This will suppress beetles that escaped earlier treatment and will help delay onset of future infestations. Pay attention to areas where beetles frequently occur, such as walls, supports, cages, stalls, and around feeders. To help control flies, apply a directed application to horizontal surfaces and overhead areas and allow to dry before reintroduction of animals.

Application Within Food Handling Establishments (places other than private residences in which exposed food is held, processed, prepared, or served) including, but not limited to, areas for receiving, storage, packing (canning, bottling, wrapping, boxing), preparing foods, edible waste storage and enclosed processing systems (mills, dairies, edible oils, syrups), and serving areas. Use as a crack and crevice or spot treatment in and around both food and nonfood areas. Apply in small amounts directly into cracks and crevices, using equipment capable of delivering a pin stream of insecticide, in points between different elements of construction, between equipment and floor, openings leading to voids and hollow spaces in walls, equipment and bases. Food contact surfaces and equipment should be cleaned with an effective cleaning compound and rinsed with potable water before using. Limit individual spot treatments to an area no larger than 20% of the treated surface. Individual spot treatments should not exceed 2 sq. ft. Take extreme care that the product is not introduced into the air. Avoid contamination of food and food processing surfaces.

Application Within Food Serving Areas (facilities where foods are served, such as dining rooms) with Demand CS:

Apply as a crack and crevice or spot treatment to selective surfaces such as baseboards, under elements of construction, and into cracks and crevices. Avoid treating surfaces likely to be contacted by food. (Do not apply when facility is in operation or foods are exposed.) Food must be covered or removed in area being treated. Do not apply directly to food or allow applications to contaminate food. Application of this product in the Food Areas and/or Food Serving Areas of Food Handling Establishments other than as a spot and/or crack and crevice treatment is not permitted. Use of application equipment such as the Micro-Injector or Actisol applicator in food areas should be limited to crack and crevice treatment only.

Application Livestock/Poultry Housing Structures and Pet Kennels with Demand CS:

Apply as a general surface (including directed sprays) and/or crack and crevice treatment. Control is enhanced when interior and exterior perimeter applications are made in and around the livestock, poultry, and pet housing structures. Normal cleaning practices of the structure also must be followed along with applications of Demand CS Insecticide to effectively control the crawling and flying insect pests listed in the table. For unoccupied areas of livestock barns or housing structures, apply to floors, vertical, and overhead surfaces where crawling or flying insect pests are or may be present. Feeders, waterers, and feed carts should be covered before application to prevent contamination. Do not apply to milk rooms or feed rooms. Pay attention to animal areas including stanchions, pipes, windows and doors, and areas where insect pests hide or congregate. Exterior applications to isouth facing walls and foundation perimeters can help prevent interior infestations of flyng and crawling insect pests.

Please refer to and follow the information on Demand CS label.

Do You Have a Question about this Product? Ask Our Experts!