Hi-Yield Stump Remover - 1.5 lbs.

Hi-Yield Stump Remover Product Label

Hi-Yield Stump Remover Material Safety Data Sheet (MSDS)

Hi-Yield Stump Remover - 1.5 lbs.

Hi-Yield Stump Remover is an easy way and your solution to removing unsightly tree stumps. It's safe to use and harmless to the surrounding vegetation. It works by decomposing the wood all the way down to the roots, which results in an easy removal or burning of the tree stump.

To remove stumps that are up to 12 inches in diameter, a few simple steps are required. Drill a 1” hole in the center of the stump that is about 10” – 12” deep. A second hole is drilled in the side of the stump that is 1” in diameter and begins about 3” below the top of the stump. This additional hole should be drilled in a slanted manner so that it can connect with the bottom of the first hole that is drilled in the center of the stump. If in case the stump is larger than 12” in diameter, then a secondary set of holes that are like the first two are drilled. (Please refer to the product label for an image reference) Once the holes are drilled, pour approximately ¼ lb. of Hi-Yield Stump Remover into each of the holes. Each hole should be filled with water afterwards. Allow the stump to stand with the Hi-Yield Stump Remover solution for about 4 – 6 weeks. Since the stump has decomposed, removal should be easy.

Please refer to and follow the instructions on the Product label.