Product Label / Material Safety Data Sheet (MSDS)

Precor IGR Concentrate

Precor IGR Concentrate is mixed with water before use. Simply mix the concentrate with water and spray in the infested area. The IGR in this product prevents the reproduction process of the fleas, basically a birth control for fleas. This will slow the infestations from spreading. Precor IGR is stainless and can be sprayed everywhere of infestation. It is recommend to use a sprayer such as Chapin 1 to 2 gallon sprayer to mix the Precor IGR Concentrate.

Active Ingredient: (S)- Methoprene (CAS #65733-16-6) - 1.2%

Size: 1 oz.

Target Pest: Fleas

Not for Sale To: NY

METHOD AND RATE OF APPLICATION:

Prepare a diluted spray solution with a final (S)-Methoprene concentration of approximately 0.007%, by adding 1 oz of PRECOR to 1 gallon of water. Partially fill the mixing container with 1/2 gallon of water, add PRECOR, shake well, and then add the remaining 1/2 gallon of water. Shake well before each use. When tank-mixing, follow the directions above except add the product to tank mix first, agitate, and then add PRECOR, agitate and complete filling of spray tank, and agitate once more. Apply at a rate of 1 gallon of the diluted spray solution per 1500 sq ft of surface area with any low pressure sprayer with a fan tip that is typically used for indoor applications. Treat all areas harboring fleas, including carpets, furniture, pet sleeping and bedding areas, and throw rugs. Treat under cushions of upholstered furniture. Avoid contact with treated surfaces until dry. When applying to upholstery where staining could be a concern, apply dilution to a small inconspicuous location to determine if possible staining could occur. Generally, PRECOR will not stain areas that would not be stained by water alone.

Please refer to and follow the directions on the Precor IGR product label.