| Live Support by OCC |
Premise 2 Termiticide is well known its termite control. Premise 2 Termiticide, a product manufactured by bayer, is long lasting and works great when treating localized areas of known subterranean activity, it can be used to treat drywood and dampwood termites as well. Premise 2 Termiticide can be used for trenching and soil drenching, foaming, or when treating wood. Premise 2 Termiticide is a non repellent meaning it is undetectable, the termites will be exposed to the product while feeding or tunneling in the soil with out even knowing.
Active Ingredient: Imidacloprid - 21.4%
Size: 8.12 fl.oz. (240 ml)
Yield and Mixing: One 8.12 fl.oz.Premise 2 Termiticide makes up to 30 gallons of solution; Mix 0.3 fl.oz. with 1 gallon of water for 0.05%. in a sprayer.
Target Pest: Subterranean termites, Drywood termites, Dampwood termites, Carpenter ants, and other wood- infesting insects.
Registered States: AL, AK, AZ, AR, CA, CO, CT, DE, DC, FL, GA, HI, ID, IL, IN, IA, KS, KY, LA, ME, MH, MD, MA, MI, MN, MS, MO, MT, NE, NV, NH, NJ, NM, NC, ND, OH, OK, OR, PA, RI, SD, TN, TX, UT, VT, VA, WA, WV, WI, WY
Treatment standards for subterranean termite control may vary due to regulations, treatment procedures, construction practices and other factors. The purpose of chemical soil treatment for termite control is to establish a continuous chemical treated zone (horizontal and/ or vertical as needed) between the wood and other cellulose material in the structure and the termite colonies in the soil. Follow all federal, state and local regulations and treatment standards for protection of a structure from termites. In some instances where an aerial or above ground colony is established, supplemental treatments to control the termites, landscape modifications, and/ or structural repairs may be needed to deprive termites of a moisture source. Use a 0.05% to 0.1% dilution based on local recommendations. Generally a 0.05% dilution is used for typical control situations where severe or persistent infestations occur a 0.1% dilution may be used.
Do not apply at a lower dosage and/ or concentration than specified on this label for applications prior to installation of the finished grade. Prior to each application, applicators must notify the general contractor, construction superintendent, or similar responsible party, of the intended termiticide application and needed sites of application and instruct the responsible person to notify construction workers and other individuals to leave the area to be treated during application and until the termiticide is absorbed in the soil.
For control of above ground termites and carpenter ants in localized areas, apply a 0.05% or 0.1% solution or sufficient volume of Premise 2 Termiticide Insecticide foam to voids and galleries in damaged wood, and in spaces between wooden structural members and between and sill plate and foundation where wood is vulnerable. Applications may be made to inaccessible areas by drilling, and then injecting the suspension or foam with a suitable directional injector into the damaged wood or wall voids. Termite carton nests in building voids may be injected with a 0.05 to 0.1% suspension or foam. Multiple injection points to varying depths may be necessary. It is desirable to physically remove carton nest material from building voids when such nests are found. Application to attics, crawl spaces, unfinished basements, or man-made voids may be made with a coarse fan spray of 0.05 to 0.1% solution or foam to control exposed worker and winged reproductive forms of termites or carpenter ants.
Please refer to and follow the directions on the Premise 2 Termiticide product label.
