PT 565 XLO Product Label

PT 565 XLO Material Safety Data Sheet (MSDS)

565 Plus XLO Contact Insecticide Pest Control 20oz Can

Whitmire Micro-Gen's 565 Plus XLO Contact Insecticide Pest Control is the perfect insect control solution. The insecticide contains the botanical insecticide Pyrethrin, an organic compound with potent insecticidal properties.

Why Should You Use 565 Plus XLO Contact Insecticide Pest Control?

565 Plus XLO covers an extensive range of bugs and a 20 oz. aerosol can cover approximately 1500 square feet of space.

Directions for 565 Plus XLO Contact Insecticide Pest Control 20oz Can Use

565 Plus XLO can be used for direct contact kills or space treatments. The product can be used indoors or outdoors to treat areas infested by insects.

Where to Apply 565 Plus XLO Contact Insecticide Pest Control 20oz Can

Apply 565 Plus XLO in apartments, homes, campgrounds, hotels, storage areas, schools, transports, supermarkets, commercial buildings and industrial buildings.

Indoor Applications

For space treatments, first calculate the size of the space to be treated. Turn off air conditioners and close all windows and doors and spray the enclosed area by directing the insecticide mist upwards. Spray at the rate of 1 to 3 seconds per 1000 cu. ft. of enclosed space and keep the area closed for at least 15 minutes for maximum effectiveness. Before reoccupying, ventilate the treated area.

For direct contact applications, place the injector tip at the can nozzle and spray on cracks and crevices frequented by insects. Spray at rates depending on applications. Spray additional amounts if necessary or when the infestation seems heavy. Please consult the Material Safety Data Sheet for the specifics.

Outdoor Applications

For outdoor treatments, spray only at wind speeds below 6 miles per hour. Repeat if necessary. Spray directly into mud dauber and wasp nests by holding the container 18" away.

PT 565 XLO Product Label

PT 565 XLO Material Safety Data Sheet (MSDS)

565 Plus XLO Contact Insecticide Pest Control 20oz Can

Whitmire Micro-Gen's 565 Plus XLO Contact Insecticide Pest Control is the perfect insect control solution. The insecticide contains the botanical insecticide Pyrethrin, an organic compound with potent insecticidal properties.

Why Should You Use 565 Plus XLO Contact Insecticide Pest Control?

565 Plus XLO covers an extensive range of bugs and a 20 oz. aerosol can cover approximately 1500 square feet of space.

Directions for 565 Plus XLO Contact Insecticide Pest Control 20oz Can Use

565 Plus XLO can be used for direct contact kills or space treatments. The product can be used indoors or outdoors to treat areas infested by insects.

Where to Apply 565 Plus XLO Contact Insecticide Pest Control 20oz Can

Apply 565 Plus XLO in apartments, homes, campgrounds, hotels, storage areas, schools, transports, supermarkets, commercial buildings and industrial buildings.

Indoor Applications

For space treatments, first calculate the size of the space to be treated. Turn off air conditioners and close all windows and doors and spray the enclosed area by directing the insecticide mist upwards. Spray at the rate of 1 to 3 seconds per 1000 cu. ft. of enclosed space and keep the area closed for at least 15 minutes for maximum effectiveness. Before reoccupying, ventilate the treated area.

For direct contact applications, place the injector tip at the can nozzle and spray on cracks and crevices frequented by insects. Spray at rates depending on applications. Spray additional amounts if necessary or when the infestation seems heavy. Please consult the Material Safety Data Sheet for the specifics.

Outdoor Applications

For outdoor treatments, spray only at wind speeds below 6 miles per hour. Repeat if necessary. Spray directly into mud dauber and wasp nests by holding the container 18" away.

PT 565 XLO Product Label

PT 565 XLO Material Safety Data Sheet (MSDS)

565 Plus XLO Contact Insecticide Pest Control 20oz Can

Whitmire Micro-Gen's 565 Plus XLO Contact Insecticide Pest Control is the perfect insect control solution. The insecticide contains the botanical insecticide Pyrethrin, an organic compound with potent insecticidal properties.

Why Should You Use 565 Plus XLO Contact Insecticide Pest Control?

565 Plus XLO covers an extensive range of bugs and a 20 oz. aerosol can cover approximately 1500 square feet of space.

Directions for 565 Plus XLO Contact Insecticide Pest Control 20oz Can Use

565 Plus XLO can be used for direct contact kills or space treatments. The product can be used indoors or outdoors to treat areas infested by insects.

Where to Apply 565 Plus XLO Contact Insecticide Pest Control 20oz Can

Apply 565 Plus XLO in apartments, homes, campgrounds, hotels, storage areas, schools, transports, supermarkets, commercial buildings and industrial buildings.

Indoor Applications

For space treatments, first calculate the size of the space to be treated. Turn off air conditioners and close all windows and doors and spray the enclosed area by directing the insecticide mist upwards. Spray at the rate of 1 to 3 seconds per 1000 cu. ft. of enclosed space and keep the area closed for at least 15 minutes for maximum effectiveness. Before reoccupying, ventilate the treated area.

For direct contact applications, place the injector tip at the can nozzle and spray on cracks and crevices frequented by insects. Spray at rates depending on applications. Spray additional amounts if necessary or when the infestation seems heavy. Please consult the Material Safety Data Sheet for the specifics.

Outdoor Applications

For outdoor treatments, spray only at wind speeds below 6 miles per hour. Repeat if necessary. Spray directly into mud dauber and wasp nests by holding the container 18" away.

PT 565 XLO Product Label

PT 565 XLO Material Safety Data Sheet (MSDS)

565 Plus XLO Contact Insecticide Pest Control 20oz Can

Whitmire Micro-Gen's 565 Plus XLO Contact Insecticide Pest Control is the perfect insect control solution. The insecticide contains the botanical insecticide Pyrethrin, an organic compound with potent insecticidal properties.

Why Should You Use 565 Plus XLO Contact Insecticide Pest Control?

565 Plus XLO covers an extensive range of bugs and a 20 oz. aerosol can cover approximately 1500 square feet of space.

Directions for 565 Plus XLO Contact Insecticide Pest Control 20oz Can Use

565 Plus XLO can be used for direct contact kills or space treatments. The product can be used indoors or outdoors to treat areas infested by insects.

Where to Apply 565 Plus XLO Contact Insecticide Pest Control 20oz Can

Apply 565 Plus XLO in apartments, homes, campgrounds, hotels, storage areas, schools, transports, supermarkets, commercial buildings and industrial buildings.

Indoor Applications

For space treatments, first calculate the size of the space to be treated. Turn off air conditioners and close all windows and doors and spray the enclosed area by directing the insecticide mist upwards. Spray at the rate of 1 to 3 seconds per 1000 cu. ft. of enclosed space and keep the area closed for at least 15 minutes for maximum effectiveness. Before reoccupying, ventilate the treated area.

For direct contact applications, place the injector tip at the can nozzle and spray on cracks and crevices frequented by insects. Spray at rates depending on applications. Spray additional amounts if necessary or when the infestation seems heavy. Please consult the Material Safety Data Sheet for the specifics.

Outdoor Applications

For outdoor treatments, spray only at wind speeds below 6 miles per hour. Repeat if necessary. Spray directly into mud dauber and wasp nests by holding the container 18" away.

PT 565 XLO Product Label

PT 565 XLO Material Safety Data Sheet (MSDS)

565 Plus XLO Contact Insecticide Pest Control 20oz Can

Whitmire Micro-Gen's 565 Plus XLO Contact Insecticide Pest Control is the perfect insect control solution. The insecticide contains the botanical insecticide Pyrethrin, an organic compound with potent insecticidal properties.

Why Should You Use 565 Plus XLO Contact Insecticide Pest Control?

565 Plus XLO covers an extensive range of bugs and a 20 oz. aerosol can cover approximately 1500 square feet of space.

Directions for 565 Plus XLO Contact Insecticide Pest Control 20oz Can Use

565 Plus XLO can be used for direct contact kills or space treatments. The product can be used indoors or outdoors to treat areas infested by insects.

Where to Apply 565 Plus XLO Contact Insecticide Pest Control 20oz Can

Apply 565 Plus XLO in apartments, homes, campgrounds, hotels, storage areas, schools, transports, supermarkets, commercial buildings and industrial buildings.

Indoor Applications

For space treatments, first calculate the size of the space to be treated. Turn off air conditioners and close all windows and doors and spray the enclosed area by directing the insecticide mist upwards. Spray at the rate of 1 to 3 seconds per 1000 cu. ft. of enclosed space and keep the area closed for at least 15 minutes for maximum effectiveness. Before reoccupying, ventilate the treated area.

For direct contact applications, place the injector tip at the can nozzle and spray on cracks and crevices frequented by insects. Spray at rates depending on applications. Spray additional amounts if necessary or when the infestation seems heavy. Please consult the Material Safety Data Sheet for the specifics.

Outdoor Applications

For outdoor treatments, spray only at wind speeds below 6 miles per hour. Repeat if necessary. Spray directly into mud dauber and wasp nests by holding the container 18" away.

PT 565 XLO Product Label

PT 565 XLO Material Safety Data Sheet (MSDS)

565 Plus XLO Contact Insecticide Pest Control 20oz Can

Whitmire Micro-Gen's 565 Plus XLO Contact Insecticide Pest Control is the perfect insect control solution. The insecticide contains the botanical insecticide Pyrethrin, an organic compound with potent insecticidal properties.

Why Should You Use 565 Plus XLO Contact Insecticide Pest Control?

565 Plus XLO covers an extensive range of bugs and a 20 oz. aerosol can cover approximately 1500 square feet of space.

Directions for 565 Plus XLO Contact Insecticide Pest Control 20oz Can Use

565 Plus XLO can be used for direct contact kills or space treatments. The product can be used indoors or outdoors to treat areas infested by insects.

Where to Apply 565 Plus XLO Contact Insecticide Pest Control 20oz Can

Apply 565 Plus XLO in apartments, homes, campgrounds, hotels, storage areas, schools, transports, supermarkets, commercial buildings and industrial buildings.

Indoor Applications

For space treatments, first calculate the size of the space to be treated. Turn off air conditioners and close all windows and doors and spray the enclosed area by directing the insecticide mist upwards. Spray at the rate of 1 to 3 seconds per 1000 cu. ft. of enclosed space and keep the area closed for at least 15 minutes for maximum effectiveness. Before reoccupying, ventilate the treated area.

For direct contact applications, place the injector tip at the can nozzle and spray on cracks and crevices frequented by insects. Spray at rates depending on applications. Spray additional amounts if necessary or when the infestation seems heavy. Please consult the Material Safety Data Sheet for the specifics.

Outdoor Applications

For outdoor treatments, spray only at wind speeds below 6 miles per hour. Repeat if necessary. Spray directly into mud dauber and wasp nests by holding the container 18" away.

PT 565 XLO Product Label

PT 565 XLO Material Safety Data Sheet (MSDS)

565 Plus XLO Contact Insecticide Pest Control 20oz Can

Whitmire Micro-Gen's 565 Plus XLO Contact Insecticide Pest Control is the perfect insect control solution. The insecticide contains the botanical insecticide Pyrethrin, an organic compound with potent insecticidal properties.

Why Should You Use 565 Plus XLO Contact Insecticide Pest Control?

565 Plus XLO covers an extensive range of bugs and a 20 oz. aerosol can cover approximately 1500 square feet of space.

Directions for 565 Plus XLO Contact Insecticide Pest Control 20oz Can Use

565 Plus XLO can be used for direct contact kills or space treatments. The product can be used indoors or outdoors to treat areas infested by insects.

Where to Apply 565 Plus XLO Contact Insecticide Pest Control 20oz Can

Apply 565 Plus XLO in apartments, homes, campgrounds, hotels, storage areas, schools, transports, supermarkets, commercial buildings and industrial buildings.

Indoor Applications

For space treatments, first calculate the size of the space to be treated. Turn off air conditioners and close all windows and doors and spray the enclosed area by directing the insecticide mist upwards. Spray at the rate of 1 to 3 seconds per 1000 cu. ft. of enclosed space and keep the area closed for at least 15 minutes for maximum effectiveness. Before reoccupying, ventilate the treated area.

For direct contact applications, place the injector tip at the can nozzle and spray on cracks and crevices frequented by insects. Spray at rates depending on applications. Spray additional amounts if necessary or when the infestation seems heavy. Please consult the Material Safety Data Sheet for the specifics.

Outdoor Applications

For outdoor treatments, spray only at wind speeds below 6 miles per hour. Repeat if necessary. Spray directly into mud dauber and wasp nests by holding the container 18" away.

PT 565 XLO Product Label

PT 565 XLO Material Safety Data Sheet (MSDS)

565 Plus XLO Contact Insecticide Pest Control 20oz Can

Whitmire Micro-Gen's 565 Plus XLO Contact Insecticide Pest Control is the perfect insect control solution. The insecticide contains the botanical insecticide Pyrethrin, an organic compound with potent insecticidal properties.

Why Should You Use 565 Plus XLO Contact Insecticide Pest Control?

565 Plus XLO covers an extensive range of bugs and a 20 oz. aerosol can cover approximately 1500 square feet of space.

Directions for 565 Plus XLO Contact Insecticide Pest Control 20oz Can Use

565 Plus XLO can be used for direct contact kills or space treatments. The product can be used indoors or outdoors to treat areas infested by insects.

Where to Apply 565 Plus XLO Contact Insecticide Pest Control 20oz Can

Apply 565 Plus XLO in apartments, homes, campgrounds, hotels, storage areas, schools, transports, supermarkets, commercial buildings and industrial buildings.

Indoor Applications

For space treatments, first calculate the size of the space to be treated. Turn off air conditioners and close all windows and doors and spray the enclosed area by directing the insecticide mist upwards. Spray at the rate of 1 to 3 seconds per 1000 cu. ft. of enclosed space and keep the area closed for at least 15 minutes for maximum effectiveness. Before reoccupying, ventilate the treated area.

For direct contact applications, place the injector tip at the can nozzle and spray on cracks and crevices frequented by insects. Spray at rates depending on applications. Spray additional amounts if necessary or when the infestation seems heavy. Please consult the Material Safety Data Sheet for the specifics.

Outdoor Applications

For outdoor treatments, spray only at wind speeds below 6 miles per hour. Repeat if necessary. Spray directly into mud dauber and wasp nests by holding the container 18" away.

Advance Cockroach Gel Bait Product Label

Advance Cockroach Gel Bait Material Safety Data Sheet (MSDS)

Advance Cockroach Gel Bait

Control cockroaches by using Whitmire Micro-Gen's Advance Cockroach Gel Bait. The product contains Dinotefuran, a potent insecticide proven to kill roaches in just hours. In gel form, the product is easy to use and can be applied almost anywhere.

Why Should You Use Advance Cockroach Gel Bait?

Advance Cockroach Gel Bait kills cockroaches faster than other brands. In addition, the gel bait remains effective for more than 30 days.

Directions for Advance Cockroach Gel Bait Use

For spot treatments, use bait gel to form spots measuring 3 to 6 millimeters in diameter. For every 100 sq. ft. of surface area, make 10 spots for light infestations and 20 spots for heavy infestations. Apply spots on areas frequented by cockroaches.

For crevice treatments, position the applicator tip directly onto cracks and crevices and deposit small amounts of the bait inside the voids.

- Do not apply the product on surfaces where food is prepared.

- Do not apply the product on surfaces that produce heat such as heaters, stoves and ovens.

- Do not apply the product on surfaces that are treated with insecticide

- Apply the product only in areas where human activity is low.

Where to use Advance Cockroach Gel Bait

Advance Cockroach Gel Bait is for use in and around residential, commercial and industrial buildings. Apply the product in areas with high cockroach activity.

Advance Cockroach Gel Bait Product Label

Advance Cockroach Gel Bait Material Safety Data Sheet (MSDS)

Advance Cockroach Gel Bait

Control cockroaches by using Whitmire Micro-Gen's Advance Cockroach Gel Bait. The product contains Dinotefuran, a potent insecticide proven to kill roaches in just hours. In gel form, the product is easy to use and can be applied almost anywhere.

Why Should You Use Advance Cockroach Gel Bait?

Advance Cockroach Gel Bait kills cockroaches faster than other brands. In addition, the gel bait remains effective for more than 30 days.

Directions for Advance Cockroach Gel Bait Use

For spot treatments, use bait gel to form spots measuring 3 to 6 millimeters in diameter. For every 100 sq. ft. of surface area, make 10 spots for light infestations and 20 spots for heavy infestations. Apply spots on areas frequented by cockroaches.

For crevice treatments, position the applicator tip directly onto cracks and crevices and deposit small amounts of the bait inside the voids.

- Do not apply the product on surfaces where food is prepared.

- Do not apply the product on surfaces that produce heat such as heaters, stoves and ovens.

- Do not apply the product on surfaces that are treated with insecticide

- Apply the product only in areas where human activity is low.

Where to use Advance Cockroach Gel Bait

Advance Cockroach Gel Bait is for use in and around residential, commercial and industrial buildings. Apply the product in areas with high cockroach activity.

Advance Cockroach Gel Bait Product Label

Advance Cockroach Gel Bait Material Safety Data Sheet (MSDS)

Advance Cockroach Gel Bait

Control cockroaches by using Whitmire Micro-Gen's Advance Cockroach Gel Bait. The product contains Dinotefuran, a potent insecticide proven to kill roaches in just hours. In gel form, the product is easy to use and can be applied almost anywhere.

Why Should You Use Advance Cockroach Gel Bait?

Advance Cockroach Gel Bait kills cockroaches faster than other brands. In addition, the gel bait remains effective for more than 30 days.

Directions for Advance Cockroach Gel Bait Use

For spot treatments, use bait gel to form spots measuring 3 to 6 millimeters in diameter. For every 100 sq. ft. of surface area, make 10 spots for light infestations and 20 spots for heavy infestations. Apply spots on areas frequented by cockroaches.

For crevice treatments, position the applicator tip directly onto cracks and crevices and deposit small amounts of the bait inside the voids.

- Do not apply the product on surfaces where food is prepared.

- Do not apply the product on surfaces that produce heat such as heaters, stoves and ovens.

- Do not apply the product on surfaces that are treated with insecticide

- Apply the product only in areas where human activity is low.

Where to use Advance Cockroach Gel Bait

Advance Cockroach Gel Bait is for use in and around residential, commercial and industrial buildings. Apply the product in areas with high cockroach activity.

Advance Cockroach Gel Bait Product Label

Advance Cockroach Gel Bait Material Safety Data Sheet (MSDS)

Advance Cockroach Gel Bait

Control cockroaches by using Whitmire Micro-Gen's Advance Cockroach Gel Bait. The product contains Dinotefuran, a potent insecticide proven to kill roaches in just hours. In gel form, the product is easy to use and can be applied almost anywhere.

Why Should You Use Advance Cockroach Gel Bait?

Advance Cockroach Gel Bait kills cockroaches faster than other brands. In addition, the gel bait remains effective for more than 30 days.

Directions for Advance Cockroach Gel Bait Use

For spot treatments, use bait gel to form spots measuring 3 to 6 millimeters in diameter. For every 100 sq. ft. of surface area, make 10 spots for light infestations and 20 spots for heavy infestations. Apply spots on areas frequented by cockroaches.

For crevice treatments, position the applicator tip directly onto cracks and crevices and deposit small amounts of the bait inside the voids.

- Do not apply the product on surfaces where food is prepared.

- Do not apply the product on surfaces that produce heat such as heaters, stoves and ovens.

- Do not apply the product on surfaces that are treated with insecticide

- Apply the product only in areas where human activity is low.

Where to use Advance Cockroach Gel Bait

Advance Cockroach Gel Bait is for use in and around residential, commercial and industrial buildings. Apply the product in areas with high cockroach activity.

Advance Cockroach Gel Bait Product Label

Advance Cockroach Gel Bait Material Safety Data Sheet (MSDS)

Advance Cockroach Gel Bait

Control cockroaches by using Whitmire Micro-Gen's Advance Cockroach Gel Bait. The product contains Dinotefuran, a potent insecticide proven to kill roaches in just hours. In gel form, the product is easy to use and can be applied almost anywhere.

Why Should You Use Advance Cockroach Gel Bait?

Advance Cockroach Gel Bait kills cockroaches faster than other brands. In addition, the gel bait remains effective for more than 30 days.

Directions for Advance Cockroach Gel Bait Use

For spot treatments, use bait gel to form spots measuring 3 to 6 millimeters in diameter. For every 100 sq. ft. of surface area, make 10 spots for light infestations and 20 spots for heavy infestations. Apply spots on areas frequented by cockroaches.

For crevice treatments, position the applicator tip directly onto cracks and crevices and deposit small amounts of the bait inside the voids.

- Do not apply the product on surfaces where food is prepared.

- Do not apply the product on surfaces that produce heat such as heaters, stoves and ovens.

- Do not apply the product on surfaces that are treated with insecticide

- Apply the product only in areas where human activity is low.

Where to use Advance Cockroach Gel Bait

Advance Cockroach Gel Bait is for use in and around residential, commercial and industrial buildings. Apply the product in areas with high cockroach activity.

Advance Cockroach Gel Bait Product Label

Advance Cockroach Gel Bait Material Safety Data Sheet (MSDS)

Advance Cockroach Gel Bait

Control cockroaches by using Whitmire Micro-Gen's Advance Cockroach Gel Bait. The product contains Dinotefuran, a potent insecticide proven to kill roaches in just hours. In gel form, the product is easy to use and can be applied almost anywhere.

Why Should You Use Advance Cockroach Gel Bait?

Advance Cockroach Gel Bait kills cockroaches faster than other brands. In addition, the gel bait remains effective for more than 30 days.

Directions for Advance Cockroach Gel Bait Use

For spot treatments, use bait gel to form spots measuring 3 to 6 millimeters in diameter. For every 100 sq. ft. of surface area, make 10 spots for light infestations and 20 spots for heavy infestations. Apply spots on areas frequented by cockroaches.

For crevice treatments, position the applicator tip directly onto cracks and crevices and deposit small amounts of the bait inside the voids.

- Do not apply the product on surfaces where food is prepared.

- Do not apply the product on surfaces that produce heat such as heaters, stoves and ovens.

- Do not apply the product on surfaces that are treated with insecticide

- Apply the product only in areas where human activity is low.

Where to use Advance Cockroach Gel Bait

Advance Cockroach Gel Bait is for use in and around residential, commercial and industrial buildings. Apply the product in areas with high cockroach activity.

Advance Cockroach Gel Bait Product Label

Advance Cockroach Gel Bait Material Safety Data Sheet (MSDS)

Advance Cockroach Gel Bait

Control cockroaches by using Whitmire Micro-Gen's Advance Cockroach Gel Bait. The product contains Dinotefuran, a potent insecticide proven to kill roaches in just hours. In gel form, the product is easy to use and can be applied almost anywhere.

Why Should You Use Advance Cockroach Gel Bait?

Advance Cockroach Gel Bait kills cockroaches faster than other brands. In addition, the gel bait remains effective for more than 30 days.

Directions for Advance Cockroach Gel Bait Use

For spot treatments, use bait gel to form spots measuring 3 to 6 millimeters in diameter. For every 100 sq. ft. of surface area, make 10 spots for light infestations and 20 spots for heavy infestations. Apply spots on areas frequented by cockroaches.

For crevice treatments, position the applicator tip directly onto cracks and crevices and deposit small amounts of the bait inside the voids.

- Do not apply the product on surfaces where food is prepared.

- Do not apply the product on surfaces that produce heat such as heaters, stoves and ovens.

- Do not apply the product on surfaces that are treated with insecticide

- Apply the product only in areas where human activity is low.

Where to use Advance Cockroach Gel Bait

Advance Cockroach Gel Bait is for use in and around residential, commercial and industrial buildings. Apply the product in areas with high cockroach activity.

Advance Cockroach Gel Bait Product Label

Advance Cockroach Gel Bait Material Safety Data Sheet (MSDS)

Advance Cockroach Gel Bait

Control cockroaches by using Whitmire Micro-Gen's Advance Cockroach Gel Bait. The product contains Dinotefuran, a potent insecticide proven to kill roaches in just hours. In gel form, the product is easy to use and can be applied almost anywhere.

Why Should You Use Advance Cockroach Gel Bait?

Advance Cockroach Gel Bait kills cockroaches faster than other brands. In addition, the gel bait remains effective for more than 30 days.

Directions for Advance Cockroach Gel Bait Use

For spot treatments, use bait gel to form spots measuring 3 to 6 millimeters in diameter. For every 100 sq. ft. of surface area, make 10 spots for light infestations and 20 spots for heavy infestations. Apply spots on areas frequented by cockroaches.

For crevice treatments, position the applicator tip directly onto cracks and crevices and deposit small amounts of the bait inside the voids.

- Do not apply the product on surfaces where food is prepared.

- Do not apply the product on surfaces that produce heat such as heaters, stoves and ovens.

- Do not apply the product on surfaces that are treated with insecticide

- Apply the product only in areas where human activity is low.

Where to use Advance Cockroach Gel Bait

Advance Cockroach Gel Bait is for use in and around residential, commercial and industrial buildings. Apply the product in areas with high cockroach activity.

Advion Roach Bait Gel Product Label

Advion Roach Bait Gel Material Safety Data Sheet (MSDS)

Dupont Advion Roach Bait Gel

Dupont Advion Roach Bait Gel targets even the toughest species of roaches- German, American, and Brown banded. Advion Roach Bait Gel is a high performing bait matrix. Advion Roach Bait Gel is one of the unbeatable bait gels that eliminates roaches and their colonies. Apply Advion Roach Bait Gel to areas of infestation. Remember, the key point is to apply in sections, not a whole lot in just one spot. Also remember not to kill the few you see, allow the roaches to carry the bait back to their hideout and expose the bait the to the whole colony of roaches to destroy them all.

Useful Tips You May Need to Know

For the best result in controlling roaches, you should avoid applying Advion Cockroach Gel Bait to areas recently treated with residual sprays. Do not spray with any residual insecticide that could repel and reduce bait gel's effectiveness.

DuPont Advion Cockroach Gel Bait is a new, high-performing bait product targeting all pest species of cockroaches. Get speed and spectrum - all in a single product - and take back the power of superior control while managing your inventory more simply.

Advion Roach Bait Gel is designed to control pest species of cockroaches including German, American, Australian, Smoky-Brown, Brown, Asian, Oriental, and Brown-Banded. The slight delay in mortality caused by the active ingredient, indoxacarb, allows cockroaches to consume the Advion Roach Bait Gel and return to the harborage site to contaminate other cockroaches resulting in significant reduction in infestation levels.

Indoor Use Directions:

Infested areas should be carefully inspected to determine overall infestation levels, locations of harborage areas, and most appropriate application points.

ADVION Cockroach Gel should be applied as a small spot of material, approximately 0.5 grams ( approx. 1/4" in dia.), to areas not able to be contacted by children or pets.

Several small applications distributed within an area are more effective than 1 or 2 applications of large quantities. In some cases, a small thin bead (less than 1/8" wide and 2"long) may be appropriate (i.e. between construction elements or other cracks and crevices).

This product may be used in the Bait Tray.

Indoor applications can include cracks and crevices along walls or floors, behind or under equipment, under tables, within framing of tables or furniture, around sinks, within or near garbage collection areas, attics, crawl spaces, and cracks and crevices in cabinets.

Advion Roach Bait Gel placements should be inspected periodically for consumption or attractiveness and reapplied as needed.

A typical infestation may require as little as 1/2 a tube (15 grams) of Advion Roach Bait Gel whereas heavy infestations in large structures may require the use of several tubes.

Outdoor Use Directions:

A thorough inspection around a structure may reveal areas where cockroaches are gaining access. Attempts should be made to remove the access. Advion cockroach gel bait may also be applied as a spot or thin bead (see above) to pest entry sites such as along windows, doors, between construction elements, sewer areas, adjacent trees which harbor cockroaches, along walls, garbage holding areas, or suitable placement site acting as a cockroach harborage. Advion Roach Bait Gel placements should be made to reduce the potential of subsequent human contact. Advion Roach Bait Gel placements should be inspected periodically and fresh bait applied as needed.

Advion Roach Bait Gel Product Label

Advion Roach Bait Gel Material Safety Data Sheet (MSDS)

Dupont Advion Roach Bait Gel

Dupont Advion Roach Bait Gel targets even the toughest species of roaches- German, American, and Brown banded. Advion Roach Bait Gel is a high performing bait matrix. Advion Roach Bait Gel is one of the unbeatable bait gels that eliminates roaches and their colonies. Apply Advion Roach Bait Gel to areas of infestation. Remember, the key point is to apply in sections, not a whole lot in just one spot. Also remember not to kill the few you see, allow the roaches to carry the bait back to their hideout and expose the bait the to the whole colony of roaches to destroy them all.

Useful Tips You May Need to Know

For the best result in controlling roaches, you should avoid applying Advion Cockroach Gel Bait to areas recently treated with residual sprays. Do not spray with any residual insecticide that could repel and reduce bait gel's effectiveness.

DuPont Advion Cockroach Gel Bait is a new, high-performing bait product targeting all pest species of cockroaches. Get speed and spectrum - all in a single product - and take back the power of superior control while managing your inventory more simply.

Advion Roach Bait Gel is designed to control pest species of cockroaches including German, American, Australian, Smoky-Brown, Brown, Asian, Oriental, and Brown-Banded. The slight delay in mortality caused by the active ingredient, indoxacarb, allows cockroaches to consume the Advion Roach Bait Gel and return to the harborage site to contaminate other cockroaches resulting in significant reduction in infestation levels.

Indoor Use Directions:

Infested areas should be carefully inspected to determine overall infestation levels, locations of harborage areas, and most appropriate application points.

ADVION Cockroach Gel should be applied as a small spot of material, approximately 0.5 grams ( approx. 1/4" in dia.), to areas not able to be contacted by children or pets.

Several small applications distributed within an area are more effective than 1 or 2 applications of large quantities. In some cases, a small thin bead (less than 1/8" wide and 2"long) may be appropriate (i.e. between construction elements or other cracks and crevices).

This product may be used in the Bait Tray.

Indoor applications can include cracks and crevices along walls or floors, behind or under equipment, under tables, within framing of tables or furniture, around sinks, within or near garbage collection areas, attics, crawl spaces, and cracks and crevices in cabinets.

Advion Roach Bait Gel placements should be inspected periodically for consumption or attractiveness and reapplied as needed.

A typical infestation may require as little as 1/2 a tube (15 grams) of Advion Roach Bait Gel whereas heavy infestations in large structures may require the use of several tubes.

Outdoor Use Directions:

A thorough inspection around a structure may reveal areas where cockroaches are gaining access. Attempts should be made to remove the access. Advion cockroach gel bait may also be applied as a spot or thin bead (see above) to pest entry sites such as along windows, doors, between construction elements, sewer areas, adjacent trees which harbor cockroaches, along walls, garbage holding areas, or suitable placement site acting as a cockroach harborage. Advion Roach Bait Gel placements should be made to reduce the potential of subsequent human contact. Advion Roach Bait Gel placements should be inspected periodically and fresh bait applied as needed.

Advion Roach Bait Gel Product Label

Advion Roach Bait Gel Material Safety Data Sheet (MSDS)

Dupont Advion Roach Bait Gel

Dupont Advion Roach Bait Gel targets even the toughest species of roaches- German, American, and Brown banded. Advion Roach Bait Gel is a high performing bait matrix. Advion Roach Bait Gel is one of the unbeatable bait gels that eliminates roaches and their colonies. Apply Advion Roach Bait Gel to areas of infestation. Remember, the key point is to apply in sections, not a whole lot in just one spot. Also remember not to kill the few you see, allow the roaches to carry the bait back to their hideout and expose the bait the to the whole colony of roaches to destroy them all.

Useful Tips You May Need to Know

For the best result in controlling roaches, you should avoid applying Advion Cockroach Gel Bait to areas recently treated with residual sprays. Do not spray with any residual insecticide that could repel and reduce bait gel's effectiveness.

DuPont Advion Cockroach Gel Bait is a new, high-performing bait product targeting all pest species of cockroaches. Get speed and spectrum - all in a single product - and take back the power of superior control while managing your inventory more simply.

Advion Roach Bait Gel is designed to control pest species of cockroaches including German, American, Australian, Smoky-Brown, Brown, Asian, Oriental, and Brown-Banded. The slight delay in mortality caused by the active ingredient, indoxacarb, allows cockroaches to consume the Advion Roach Bait Gel and return to the harborage site to contaminate other cockroaches resulting in significant reduction in infestation levels.

Indoor Use Directions:

Infested areas should be carefully inspected to determine overall infestation levels, locations of harborage areas, and most appropriate application points.

ADVION Cockroach Gel should be applied as a small spot of material, approximately 0.5 grams ( approx. 1/4" in dia.), to areas not able to be contacted by children or pets.

Several small applications distributed within an area are more effective than 1 or 2 applications of large quantities. In some cases, a small thin bead (less than 1/8" wide and 2"long) may be appropriate (i.e. between construction elements or other cracks and crevices).

This product may be used in the Bait Tray.

Indoor applications can include cracks and crevices along walls or floors, behind or under equipment, under tables, within framing of tables or furniture, around sinks, within or near garbage collection areas, attics, crawl spaces, and cracks and crevices in cabinets.

Advion Roach Bait Gel placements should be inspected periodically for consumption or attractiveness and reapplied as needed.

A typical infestation may require as little as 1/2 a tube (15 grams) of Advion Roach Bait Gel whereas heavy infestations in large structures may require the use of several tubes.

Outdoor Use Directions:

A thorough inspection around a structure may reveal areas where cockroaches are gaining access. Attempts should be made to remove the access. Advion cockroach gel bait may also be applied as a spot or thin bead (see above) to pest entry sites such as along windows, doors, between construction elements, sewer areas, adjacent trees which harbor cockroaches, along walls, garbage holding areas, or suitable placement site acting as a cockroach harborage. Advion Roach Bait Gel placements should be made to reduce the potential of subsequent human contact. Advion Roach Bait Gel placements should be inspected periodically and fresh bait applied as needed.

Advion Roach Bait Gel Product Label

Advion Roach Bait Gel Material Safety Data Sheet (MSDS)

Dupont Advion Roach Bait Gel

Dupont Advion Roach Bait Gel targets even the toughest species of roaches- German, American, and Brown banded. Advion Roach Bait Gel is a high performing bait matrix. Advion Roach Bait Gel is one of the unbeatable bait gels that eliminates roaches and their colonies. Apply Advion Roach Bait Gel to areas of infestation. Remember, the key point is to apply in sections, not a whole lot in just one spot. Also remember not to kill the few you see, allow the roaches to carry the bait back to their hideout and expose the bait the to the whole colony of roaches to destroy them all.

Useful Tips You May Need to Know

For the best result in controlling roaches, you should avoid applying Advion Cockroach Gel Bait to areas recently treated with residual sprays. Do not spray with any residual insecticide that could repel and reduce bait gel's effectiveness.

DuPont Advion Cockroach Gel Bait is a new, high-performing bait product targeting all pest species of cockroaches. Get speed and spectrum - all in a single product - and take back the power of superior control while managing your inventory more simply.

Advion Roach Bait Gel is designed to control pest species of cockroaches including German, American, Australian, Smoky-Brown, Brown, Asian, Oriental, and Brown-Banded. The slight delay in mortality caused by the active ingredient, indoxacarb, allows cockroaches to consume the Advion Roach Bait Gel and return to the harborage site to contaminate other cockroaches resulting in significant reduction in infestation levels.

Indoor Use Directions:

Infested areas should be carefully inspected to determine overall infestation levels, locations of harborage areas, and most appropriate application points.

ADVION Cockroach Gel should be applied as a small spot of material, approximately 0.5 grams ( approx. 1/4" in dia.), to areas not able to be contacted by children or pets.

Several small applications distributed within an area are more effective than 1 or 2 applications of large quantities. In some cases, a small thin bead (less than 1/8" wide and 2"long) may be appropriate (i.e. between construction elements or other cracks and crevices).

This product may be used in the Bait Tray.

Indoor applications can include cracks and crevices along walls or floors, behind or under equipment, under tables, within framing of tables or furniture, around sinks, within or near garbage collection areas, attics, crawl spaces, and cracks and crevices in cabinets.

Advion Roach Bait Gel placements should be inspected periodically for consumption or attractiveness and reapplied as needed.

A typical infestation may require as little as 1/2 a tube (15 grams) of Advion Roach Bait Gel whereas heavy infestations in large structures may require the use of several tubes.

Outdoor Use Directions:

A thorough inspection around a structure may reveal areas where cockroaches are gaining access. Attempts should be made to remove the access. Advion cockroach gel bait may also be applied as a spot or thin bead (see above) to pest entry sites such as along windows, doors, between construction elements, sewer areas, adjacent trees which harbor cockroaches, along walls, garbage holding areas, or suitable placement site acting as a cockroach harborage. Advion Roach Bait Gel placements should be made to reduce the potential of subsequent human contact. Advion Roach Bait Gel placements should be inspected periodically and fresh bait applied as needed.

Advion Roach Bait Gel Product Label

Advion Roach Bait Gel Material Safety Data Sheet (MSDS)

Dupont Advion Roach Bait Gel

Dupont Advion Roach Bait Gel targets even the toughest species of roaches- German, American, and Brown banded. Advion Roach Bait Gel is a high performing bait matrix. Advion Roach Bait Gel is one of the unbeatable bait gels that eliminates roaches and their colonies. Apply Advion Roach Bait Gel to areas of infestation. Remember, the key point is to apply in sections, not a whole lot in just one spot. Also remember not to kill the few you see, allow the roaches to carry the bait back to their hideout and expose the bait the to the whole colony of roaches to destroy them all.

Useful Tips You May Need to Know

For the best result in controlling roaches, you should avoid applying Advion Cockroach Gel Bait to areas recently treated with residual sprays. Do not spray with any residual insecticide that could repel and reduce bait gel's effectiveness.

DuPont Advion Cockroach Gel Bait is a new, high-performing bait product targeting all pest species of cockroaches. Get speed and spectrum - all in a single product - and take back the power of superior control while managing your inventory more simply.

Advion Roach Bait Gel is designed to control pest species of cockroaches including German, American, Australian, Smoky-Brown, Brown, Asian, Oriental, and Brown-Banded. The slight delay in mortality caused by the active ingredient, indoxacarb, allows cockroaches to consume the Advion Roach Bait Gel and return to the harborage site to contaminate other cockroaches resulting in significant reduction in infestation levels.

Indoor Use Directions:

Infested areas should be carefully inspected to determine overall infestation levels, locations of harborage areas, and most appropriate application points.

ADVION Cockroach Gel should be applied as a small spot of material, approximately 0.5 grams ( approx. 1/4" in dia.), to areas not able to be contacted by children or pets.

Several small applications distributed within an area are more effective than 1 or 2 applications of large quantities. In some cases, a small thin bead (less than 1/8" wide and 2"long) may be appropriate (i.e. between construction elements or other cracks and crevices).

This product may be used in the Bait Tray.

Indoor applications can include cracks and crevices along walls or floors, behind or under equipment, under tables, within framing of tables or furniture, around sinks, within or near garbage collection areas, attics, crawl spaces, and cracks and crevices in cabinets.

Advion Roach Bait Gel placements should be inspected periodically for consumption or attractiveness and reapplied as needed.

A typical infestation may require as little as 1/2 a tube (15 grams) of Advion Roach Bait Gel whereas heavy infestations in large structures may require the use of several tubes.

Outdoor Use Directions:

A thorough inspection around a structure may reveal areas where cockroaches are gaining access. Attempts should be made to remove the access. Advion cockroach gel bait may also be applied as a spot or thin bead (see above) to pest entry sites such as along windows, doors, between construction elements, sewer areas, adjacent trees which harbor cockroaches, along walls, garbage holding areas, or suitable placement site acting as a cockroach harborage. Advion Roach Bait Gel placements should be made to reduce the potential of subsequent human contact. Advion Roach Bait Gel placements should be inspected periodically and fresh bait applied as needed.

Advion Roach Bait Gel Product Label

Advion Roach Bait Gel Material Safety Data Sheet (MSDS)

Dupont Advion Roach Bait Gel

Dupont Advion Roach Bait Gel targets even the toughest species of roaches- German, American, and Brown banded. Advion Roach Bait Gel is a high performing bait matrix. Advion Roach Bait Gel is one of the unbeatable bait gels that eliminates roaches and their colonies. Apply Advion Roach Bait Gel to areas of infestation. Remember, the key point is to apply in sections, not a whole lot in just one spot. Also remember not to kill the few you see, allow the roaches to carry the bait back to their hideout and expose the bait the to the whole colony of roaches to destroy them all.

Useful Tips You May Need to Know

For the best result in controlling roaches, you should avoid applying Advion Cockroach Gel Bait to areas recently treated with residual sprays. Do not spray with any residual insecticide that could repel and reduce bait gel's effectiveness.

DuPont Advion Cockroach Gel Bait is a new, high-performing bait product targeting all pest species of cockroaches. Get speed and spectrum - all in a single product - and take back the power of superior control while managing your inventory more simply.

Advion Roach Bait Gel is designed to control pest species of cockroaches including German, American, Australian, Smoky-Brown, Brown, Asian, Oriental, and Brown-Banded. The slight delay in mortality caused by the active ingredient, indoxacarb, allows cockroaches to consume the Advion Roach Bait Gel and return to the harborage site to contaminate other cockroaches resulting in significant reduction in infestation levels.

Indoor Use Directions:

Infested areas should be carefully inspected to determine overall infestation levels, locations of harborage areas, and most appropriate application points.

ADVION Cockroach Gel should be applied as a small spot of material, approximately 0.5 grams ( approx. 1/4" in dia.), to areas not able to be contacted by children or pets.

Several small applications distributed within an area are more effective than 1 or 2 applications of large quantities. In some cases, a small thin bead (less than 1/8" wide and 2"long) may be appropriate (i.e. between construction elements or other cracks and crevices).

This product may be used in the Bait Tray.

Indoor applications can include cracks and crevices along walls or floors, behind or under equipment, under tables, within framing of tables or furniture, around sinks, within or near garbage collection areas, attics, crawl spaces, and cracks and crevices in cabinets.

Advion Roach Bait Gel placements should be inspected periodically for consumption or attractiveness and reapplied as needed.

A typical infestation may require as little as 1/2 a tube (15 grams) of Advion Roach Bait Gel whereas heavy infestations in large structures may require the use of several tubes.

Outdoor Use Directions:

A thorough inspection around a structure may reveal areas where cockroaches are gaining access. Attempts should be made to remove the access. Advion cockroach gel bait may also be applied as a spot or thin bead (see above) to pest entry sites such as along windows, doors, between construction elements, sewer areas, adjacent trees which harbor cockroaches, along walls, garbage holding areas, or suitable placement site acting as a cockroach harborage. Advion Roach Bait Gel placements should be made to reduce the potential of subsequent human contact. Advion Roach Bait Gel placements should be inspected periodically and fresh bait applied as needed.

Advion Roach Bait Gel Product Label

Advion Roach Bait Gel Material Safety Data Sheet (MSDS)

Dupont Advion Roach Bait Gel

Dupont Advion Roach Bait Gel targets even the toughest species of roaches- German, American, and Brown banded. Advion Roach Bait Gel is a high performing bait matrix. Advion Roach Bait Gel is one of the unbeatable bait gels that eliminates roaches and their colonies. Apply Advion Roach Bait Gel to areas of infestation. Remember, the key point is to apply in sections, not a whole lot in just one spot. Also remember not to kill the few you see, allow the roaches to carry the bait back to their hideout and expose the bait the to the whole colony of roaches to destroy them all.

Useful Tips You May Need to Know

For the best result in controlling roaches, you should avoid applying Advion Cockroach Gel Bait to areas recently treated with residual sprays. Do not spray with any residual insecticide that could repel and reduce bait gel's effectiveness.

DuPont Advion Cockroach Gel Bait is a new, high-performing bait product targeting all pest species of cockroaches. Get speed and spectrum - all in a single product - and take back the power of superior control while managing your inventory more simply.

Advion Roach Bait Gel is designed to control pest species of cockroaches including German, American, Australian, Smoky-Brown, Brown, Asian, Oriental, and Brown-Banded. The slight delay in mortality caused by the active ingredient, indoxacarb, allows cockroaches to consume the Advion Roach Bait Gel and return to the harborage site to contaminate other cockroaches resulting in significant reduction in infestation levels.

Indoor Use Directions:

Infested areas should be carefully inspected to determine overall infestation levels, locations of harborage areas, and most appropriate application points.

ADVION Cockroach Gel should be applied as a small spot of material, approximately 0.5 grams ( approx. 1/4" in dia.), to areas not able to be contacted by children or pets.

Several small applications distributed within an area are more effective than 1 or 2 applications of large quantities. In some cases, a small thin bead (less than 1/8" wide and 2"long) may be appropriate (i.e. between construction elements or other cracks and crevices).

This product may be used in the Bait Tray.

Indoor applications can include cracks and crevices along walls or floors, behind or under equipment, under tables, within framing of tables or furniture, around sinks, within or near garbage collection areas, attics, crawl spaces, and cracks and crevices in cabinets.

Advion Roach Bait Gel placements should be inspected periodically for consumption or attractiveness and reapplied as needed.

A typical infestation may require as little as 1/2 a tube (15 grams) of Advion Roach Bait Gel whereas heavy infestations in large structures may require the use of several tubes.

Outdoor Use Directions:

A thorough inspection around a structure may reveal areas where cockroaches are gaining access. Attempts should be made to remove the access. Advion cockroach gel bait may also be applied as a spot or thin bead (see above) to pest entry sites such as along windows, doors, between construction elements, sewer areas, adjacent trees which harbor cockroaches, along walls, garbage holding areas, or suitable placement site acting as a cockroach harborage. Advion Roach Bait Gel placements should be made to reduce the potential of subsequent human contact. Advion Roach Bait Gel placements should be inspected periodically and fresh bait applied as needed.

Advion Roach Bait Gel Product Label

Advion Roach Bait Gel Material Safety Data Sheet (MSDS)

Dupont Advion Roach Bait Gel

Dupont Advion Roach Bait Gel targets even the toughest species of roaches- German, American, and Brown banded. Advion Roach Bait Gel is a high performing bait matrix. Advion Roach Bait Gel is one of the unbeatable bait gels that eliminates roaches and their colonies. Apply Advion Roach Bait Gel to areas of infestation. Remember, the key point is to apply in sections, not a whole lot in just one spot. Also remember not to kill the few you see, allow the roaches to carry the bait back to their hideout and expose the bait the to the whole colony of roaches to destroy them all.

Useful Tips You May Need to Know

For the best result in controlling roaches, you should avoid applying Advion Cockroach Gel Bait to areas recently treated with residual sprays. Do not spray with any residual insecticide that could repel and reduce bait gel's effectiveness.

DuPont Advion Cockroach Gel Bait is a new, high-performing bait product targeting all pest species of cockroaches. Get speed and spectrum - all in a single product - and take back the power of superior control while managing your inventory more simply.

Advion Roach Bait Gel is designed to control pest species of cockroaches including German, American, Australian, Smoky-Brown, Brown, Asian, Oriental, and Brown-Banded. The slight delay in mortality caused by the active ingredient, indoxacarb, allows cockroaches to consume the Advion Roach Bait Gel and return to the harborage site to contaminate other cockroaches resulting in significant reduction in infestation levels.

Indoor Use Directions:

Infested areas should be carefully inspected to determine overall infestation levels, locations of harborage areas, and most appropriate application points.

ADVION Cockroach Gel should be applied as a small spot of material, approximately 0.5 grams ( approx. 1/4" in dia.), to areas not able to be contacted by children or pets.

Several small applications distributed within an area are more effective than 1 or 2 applications of large quantities. In some cases, a small thin bead (less than 1/8" wide and 2"long) may be appropriate (i.e. between construction elements or other cracks and crevices).

This product may be used in the Bait Tray.

Indoor applications can include cracks and crevices along walls or floors, behind or under equipment, under tables, within framing of tables or furniture, around sinks, within or near garbage collection areas, attics, crawl spaces, and cracks and crevices in cabinets.

Advion Roach Bait Gel placements should be inspected periodically for consumption or attractiveness and reapplied as needed.

A typical infestation may require as little as 1/2 a tube (15 grams) of Advion Roach Bait Gel whereas heavy infestations in large structures may require the use of several tubes.

Outdoor Use Directions:

A thorough inspection around a structure may reveal areas where cockroaches are gaining access. Attempts should be made to remove the access. Advion cockroach gel bait may also be applied as a spot or thin bead (see above) to pest entry sites such as along windows, doors, between construction elements, sewer areas, adjacent trees which harbor cockroaches, along walls, garbage holding areas, or suitable placement site acting as a cockroach harborage. Advion Roach Bait Gel placements should be made to reduce the potential of subsequent human contact. Advion Roach Bait Gel placements should be inspected periodically and fresh bait applied as needed.

Alpine Dust Product Label

Alpine Dust Material Safety Data Sheet (MSDS)

How to Applying Dust Insecticide

Alpine Dust Insecticide - 3 lbs

Alpine Dust Insecticide is a direct contact insecticide in powder form. Like other Alpine products, the dust insecticide contains the non-repellent insecticide Dinotefuran. Alpine Dust Insecticide is tested and proven to control ants, cockroaches, bed bugs, beetles, fleas, moths, spiders, flies, wasps, millipedes and centipedes.

Why Should You Use Alpine Dust Insecticide?

Alpine Dust Insecticide provides a quick knockdown to a wide range of controllable pests. A 3 lb bag of the product covers approximately 3000 square feet.

Directions for Alpine Dust Insecticide Use

Product can be applied by hand or by the use of dusters and other similar equipment to ensure uniform applications. Spread the product evenly on to infested areas following the recommended application rates found in the product label. Apply 0.15 to 0.30 oz. of the product per square yard of surface area.

Please read the product label for application instructions and the recommended application rates. Pestmall offers Centrobulb Dusters and Bellow Dusters needed to apply Alpine Dust Insecticides.

Do not apply the product to surfaces where food is processed such as kitchen tables and sinks.

Do not treat pets or pet beddings with the product. Replace beddings after treating the area.

Please read the product label for application instructions and the recommended application rates. Pestmall offers Centrobulb Dusters and Bellow Dusters needed to apply Alpine Dust Insecticides.

Where to Apply Alpine Dust Insecticide

Alpine Dust Insecticide is for use in and around residential, commercial and industrial buildings. Apply thoroughly and evenly to infested areas, cracks and crevices, nests, voids, corners, under sinks and shelves, storage areas and other places where insects congregate, nest and hide.

For perimeter applications, sprinkle the product around insect entry holes such as structural cracks and crevices, window sills, patios, porches and other areas where insects have access to the building.

Alpine Dust Product Label

Alpine Dust Material Safety Data Sheet (MSDS)

How to Applying Dust Insecticide

Alpine Dust Insecticide - 3 lbs

Alpine Dust Insecticide is a direct contact insecticide in powder form. Like other Alpine products, the dust insecticide contains the non-repellent insecticide Dinotefuran. Alpine Dust Insecticide is tested and proven to control ants, cockroaches, bed bugs, beetles, fleas, moths, spiders, flies, wasps, millipedes and centipedes.

Why Should You Use Alpine Dust Insecticide?

Alpine Dust Insecticide provides a quick knockdown to a wide range of controllable pests. A 3 lb bag of the product covers approximately 3000 square feet.

Directions for Alpine Dust Insecticide Use

Product can be applied by hand or by the use of dusters and other similar equipment to ensure uniform applications. Spread the product evenly on to infested areas following the recommended application rates found in the product label. Apply 0.15 to 0.30 oz. of the product per square yard of surface area.

Please read the product label for application instructions and the recommended application rates. Pestmall offers Centrobulb Dusters and Bellow Dusters needed to apply Alpine Dust Insecticides.

Do not apply the product to surfaces where food is processed such as kitchen tables and sinks.

Do not treat pets or pet beddings with the product. Replace beddings after treating the area.

Please read the product label for application instructions and the recommended application rates. Pestmall offers Centrobulb Dusters and Bellow Dusters needed to apply Alpine Dust Insecticides.

Where to Apply Alpine Dust Insecticide

Alpine Dust Insecticide is for use in and around residential, commercial and industrial buildings. Apply thoroughly and evenly to infested areas, cracks and crevices, nests, voids, corners, under sinks and shelves, storage areas and other places where insects congregate, nest and hide.

For perimeter applications, sprinkle the product around insect entry holes such as structural cracks and crevices, window sills, patios, porches and other areas where insects have access to the building.

Alpine Dust Product Label

Alpine Dust Material Safety Data Sheet (MSDS)

How to Applying Dust Insecticide

Alpine Dust Insecticide - 3 lbs

Alpine Dust Insecticide is a direct contact insecticide in powder form. Like other Alpine products, the dust insecticide contains the non-repellent insecticide Dinotefuran. Alpine Dust Insecticide is tested and proven to control ants, cockroaches, bed bugs, beetles, fleas, moths, spiders, flies, wasps, millipedes and centipedes.

Why Should You Use Alpine Dust Insecticide?

Alpine Dust Insecticide provides a quick knockdown to a wide range of controllable pests. A 3 lb bag of the product covers approximately 3000 square feet.

Directions for Alpine Dust Insecticide Use

Product can be applied by hand or by the use of dusters and other similar equipment to ensure uniform applications. Spread the product evenly on to infested areas following the recommended application rates found in the product label. Apply 0.15 to 0.30 oz. of the product per square yard of surface area.

Please read the product label for application instructions and the recommended application rates. Pestmall offers Centrobulb Dusters and Bellow Dusters needed to apply Alpine Dust Insecticides.

Do not apply the product to surfaces where food is processed such as kitchen tables and sinks.

Do not treat pets or pet beddings with the product. Replace beddings after treating the area.

Please read the product label for application instructions and the recommended application rates. Pestmall offers Centrobulb Dusters and Bellow Dusters needed to apply Alpine Dust Insecticides.

Where to Apply Alpine Dust Insecticide

Alpine Dust Insecticide is for use in and around residential, commercial and industrial buildings. Apply thoroughly and evenly to infested areas, cracks and crevices, nests, voids, corners, under sinks and shelves, storage areas and other places where insects congregate, nest and hide.

For perimeter applications, sprinkle the product around insect entry holes such as structural cracks and crevices, window sills, patios, porches and other areas where insects have access to the building.

Alpine Dust Product Label

Alpine Dust Material Safety Data Sheet (MSDS)

How to Applying Dust Insecticide

Alpine Dust Insecticide - 3 lbs

Alpine Dust Insecticide is a direct contact insecticide in powder form. Like other Alpine products, the dust insecticide contains the non-repellent insecticide Dinotefuran. Alpine Dust Insecticide is tested and proven to control ants, cockroaches, bed bugs, beetles, fleas, moths, spiders, flies, wasps, millipedes and centipedes.

Why Should You Use Alpine Dust Insecticide?

Alpine Dust Insecticide provides a quick knockdown to a wide range of controllable pests. A 3 lb bag of the product covers approximately 3000 square feet.

Directions for Alpine Dust Insecticide Use

Product can be applied by hand or by the use of dusters and other similar equipment to ensure uniform applications. Spread the product evenly on to infested areas following the recommended application rates found in the product label. Apply 0.15 to 0.30 oz. of the product per square yard of surface area.

Please read the product label for application instructions and the recommended application rates. Pestmall offers Centrobulb Dusters and Bellow Dusters needed to apply Alpine Dust Insecticides.

Do not apply the product to surfaces where food is processed such as kitchen tables and sinks.

Do not treat pets or pet beddings with the product. Replace beddings after treating the area.

Please read the product label for application instructions and the recommended application rates. Pestmall offers Centrobulb Dusters and Bellow Dusters needed to apply Alpine Dust Insecticides.

Where to Apply Alpine Dust Insecticide

Alpine Dust Insecticide is for use in and around residential, commercial and industrial buildings. Apply thoroughly and evenly to infested areas, cracks and crevices, nests, voids, corners, under sinks and shelves, storage areas and other places where insects congregate, nest and hide.

For perimeter applications, sprinkle the product around insect entry holes such as structural cracks and crevices, window sills, patios, porches and other areas where insects have access to the building.

Alpine Dust Product Label

Alpine Dust Material Safety Data Sheet (MSDS)

How to Applying Dust Insecticide

Alpine Dust Insecticide - 3 lbs

Alpine Dust Insecticide is a direct contact insecticide in powder form. Like other Alpine products, the dust insecticide contains the non-repellent insecticide Dinotefuran. Alpine Dust Insecticide is tested and proven to control ants, cockroaches, bed bugs, beetles, fleas, moths, spiders, flies, wasps, millipedes and centipedes.

Why Should You Use Alpine Dust Insecticide?

Alpine Dust Insecticide provides a quick knockdown to a wide range of controllable pests. A 3 lb bag of the product covers approximately 3000 square feet.

Directions for Alpine Dust Insecticide Use

Product can be applied by hand or by the use of dusters and other similar equipment to ensure uniform applications. Spread the product evenly on to infested areas following the recommended application rates found in the product label. Apply 0.15 to 0.30 oz. of the product per square yard of surface area.

Please read the product label for application instructions and the recommended application rates. Pestmall offers Centrobulb Dusters and Bellow Dusters needed to apply Alpine Dust Insecticides.

Do not apply the product to surfaces where food is processed such as kitchen tables and sinks.

Do not treat pets or pet beddings with the product. Replace beddings after treating the area.

Please read the product label for application instructions and the recommended application rates. Pestmall offers Centrobulb Dusters and Bellow Dusters needed to apply Alpine Dust Insecticides.

Where to Apply Alpine Dust Insecticide

Alpine Dust Insecticide is for use in and around residential, commercial and industrial buildings. Apply thoroughly and evenly to infested areas, cracks and crevices, nests, voids, corners, under sinks and shelves, storage areas and other places where insects congregate, nest and hide.

For perimeter applications, sprinkle the product around insect entry holes such as structural cracks and crevices, window sills, patios, porches and other areas where insects have access to the building.

Alpine Dust Product Label

Alpine Dust Material Safety Data Sheet (MSDS)

How to Applying Dust Insecticide

Alpine Dust Insecticide - 3 lbs

Alpine Dust Insecticide is a direct contact insecticide in powder form. Like other Alpine products, the dust insecticide contains the non-repellent insecticide Dinotefuran. Alpine Dust Insecticide is tested and proven to control ants, cockroaches, bed bugs, beetles, fleas, moths, spiders, flies, wasps, millipedes and centipedes.

Why Should You Use Alpine Dust Insecticide?

Alpine Dust Insecticide provides a quick knockdown to a wide range of controllable pests. A 3 lb bag of the product covers approximately 3000 square feet.

Directions for Alpine Dust Insecticide Use

Product can be applied by hand or by the use of dusters and other similar equipment to ensure uniform applications. Spread the product evenly on to infested areas following the recommended application rates found in the product label. Apply 0.15 to 0.30 oz. of the product per square yard of surface area.

Please read the product label for application instructions and the recommended application rates. Pestmall offers Centrobulb Dusters and Bellow Dusters needed to apply Alpine Dust Insecticides.

Do not apply the product to surfaces where food is processed such as kitchen tables and sinks.

Do not treat pets or pet beddings with the product. Replace beddings after treating the area.

Please read the product label for application instructions and the recommended application rates. Pestmall offers Centrobulb Dusters and Bellow Dusters needed to apply Alpine Dust Insecticides.

Where to Apply Alpine Dust Insecticide

Alpine Dust Insecticide is for use in and around residential, commercial and industrial buildings. Apply thoroughly and evenly to infested areas, cracks and crevices, nests, voids, corners, under sinks and shelves, storage areas and other places where insects congregate, nest and hide.

For perimeter applications, sprinkle the product around insect entry holes such as structural cracks and crevices, window sills, patios, porches and other areas where insects have access to the building.

Alpine Dust Product Label

Alpine Dust Material Safety Data Sheet (MSDS)

How to Applying Dust Insecticide

Alpine Dust Insecticide - 3 lbs

Alpine Dust Insecticide is a direct contact insecticide in powder form. Like other Alpine products, the dust insecticide contains the non-repellent insecticide Dinotefuran. Alpine Dust Insecticide is tested and proven to control ants, cockroaches, bed bugs, beetles, fleas, moths, spiders, flies, wasps, millipedes and centipedes.

Why Should You Use Alpine Dust Insecticide?

Alpine Dust Insecticide provides a quick knockdown to a wide range of controllable pests. A 3 lb bag of the product covers approximately 3000 square feet.

Directions for Alpine Dust Insecticide Use

Product can be applied by hand or by the use of dusters and other similar equipment to ensure uniform applications. Spread the product evenly on to infested areas following the recommended application rates found in the product label. Apply 0.15 to 0.30 oz. of the product per square yard of surface area.

Please read the product label for application instructions and the recommended application rates. Pestmall offers Centrobulb Dusters and Bellow Dusters needed to apply Alpine Dust Insecticides.

Do not apply the product to surfaces where food is processed such as kitchen tables and sinks.

Do not treat pets or pet beddings with the product. Replace beddings after treating the area.

Please read the product label for application instructions and the recommended application rates. Pestmall offers Centrobulb Dusters and Bellow Dusters needed to apply Alpine Dust Insecticides.

Where to Apply Alpine Dust Insecticide

Alpine Dust Insecticide is for use in and around residential, commercial and industrial buildings. Apply thoroughly and evenly to infested areas, cracks and crevices, nests, voids, corners, under sinks and shelves, storage areas and other places where insects congregate, nest and hide.

For perimeter applications, sprinkle the product around insect entry holes such as structural cracks and crevices, window sills, patios, porches and other areas where insects have access to the building.

Alpine Dust Product Label

Alpine Dust Material Safety Data Sheet (MSDS)

How to Applying Dust Insecticide

Alpine Dust Insecticide - 3 lbs

Alpine Dust Insecticide is a direct contact insecticide in powder form. Like other Alpine products, the dust insecticide contains the non-repellent insecticide Dinotefuran. Alpine Dust Insecticide is tested and proven to control ants, cockroaches, bed bugs, beetles, fleas, moths, spiders, flies, wasps, millipedes and centipedes.

Why Should You Use Alpine Dust Insecticide?

Alpine Dust Insecticide provides a quick knockdown to a wide range of controllable pests. A 3 lb bag of the product covers approximately 3000 square feet.

Directions for Alpine Dust Insecticide Use

Product can be applied by hand or by the use of dusters and other similar equipment to ensure uniform applications. Spread the product evenly on to infested areas following the recommended application rates found in the product label. Apply 0.15 to 0.30 oz. of the product per square yard of surface area.

Please read the product label for application instructions and the recommended application rates. Pestmall offers Centrobulb Dusters and Bellow Dusters needed to apply Alpine Dust Insecticides.

Do not apply the product to surfaces where food is processed such as kitchen tables and sinks.

Do not treat pets or pet beddings with the product. Replace beddings after treating the area.

Please read the product label for application instructions and the recommended application rates. Pestmall offers Centrobulb Dusters and Bellow Dusters needed to apply Alpine Dust Insecticides.

Where to Apply Alpine Dust Insecticide

Alpine Dust Insecticide is for use in and around residential, commercial and industrial buildings. Apply thoroughly and evenly to infested areas, cracks and crevices, nests, voids, corners, under sinks and shelves, storage areas and other places where insects congregate, nest and hide.

For perimeter applications, sprinkle the product around insect entry holes such as structural cracks and crevices, window sills, patios, porches and other areas where insects have access to the building.

Alpine Pressurized Insecticide Product Label

Alpine Pressurized Insecticide Material Safety Data Sheet (MSDS)

Alpine Pressurized Insecticide Spray - 20 oz

Developed by Whitmire-Micro Gen Laboratories, the Alpine line of pest control products contain Dinotefuran. The Alpine Insecticide Spray is unusually effective for it contains high concentrations of the potent insecticide. In atomized form, the pesticide provides a quick killing action against pests. Alpine Pressurized insecticide spray is a must-have for homes for quick and effective control of common pest insects.

Why Should You Use?

Alpine Insecticide Spray is safe to use in and around residential spaces and has been granted by the EPA a Reduced Risk status.

Directions for Use

Shake well the Alpine Insecticide aerosol can before applications. Alpine Insecticide Spray can be used for direct contact kills, crack and crevice treatments, spot treatments and space treatments. The product is ideal for use indoors or outdoors to treat infested sites, nests and areas harboring insects. Hold the product upright and direct the nozzle 12 inches away from insects/surfaces to be treated. For direct contact applications, direct the nozzle towards insects and away from persons. When treating surfaces, Treat infFor crack and crevice treatments, use the supplied actuator to apply the product inside to voids, cracks, crevices holes and other insect-harboring sites. Please read the product label for application instructions and safety precautions. Use the product as directed in the product label. Do NOT apply the product to food-handling surfaces.

Where to Apply

Alpine Pressurized Insecticide spray is for use in and around apartments, campgrounds, homes, hospitals, hotels, nursing homes, resorts, schools, warehouses, commercial buildings and industrial buildings.

Alpine Pressurized Insecticide Product Label

Alpine Pressurized Insecticide Material Safety Data Sheet (MSDS)

Alpine Pressurized Insecticide Spray - 20 oz

Developed by Whitmire-Micro Gen Laboratories, the Alpine line of pest control products contain Dinotefuran. The Alpine Insecticide Spray is unusually effective for it contains high concentrations of the potent insecticide. In atomized form, the pesticide provides a quick killing action against pests. Alpine Pressurized insecticide spray is a must-have for homes for quick and effective control of common pest insects.

Why Should You Use?

Alpine Insecticide Spray is safe to use in and around residential spaces and has been granted by the EPA a Reduced Risk status.

Directions for Use

Shake well the Alpine Insecticide aerosol can before applications. Alpine Insecticide Spray can be used for direct contact kills, crack and crevice treatments, spot treatments and space treatments. The product is ideal for use indoors or outdoors to treat infested sites, nests and areas harboring insects. Hold the product upright and direct the nozzle 12 inches away from insects/surfaces to be treated. For direct contact applications, direct the nozzle towards insects and away from persons. When treating surfaces, Treat infFor crack and crevice treatments, use the supplied actuator to apply the product inside to voids, cracks, crevices holes and other insect-harboring sites. Please read the product label for application instructions and safety precautions. Use the product as directed in the product label. Do NOT apply the product to food-handling surfaces.

Where to Apply

Alpine Pressurized Insecticide spray is for use in and around apartments, campgrounds, homes, hospitals, hotels, nursing homes, resorts, schools, warehouses, commercial buildings and industrial buildings.

Alpine Pressurized Insecticide Product Label

Alpine Pressurized Insecticide Material Safety Data Sheet (MSDS)

Alpine Pressurized Insecticide Spray - 20 oz

Developed by Whitmire-Micro Gen Laboratories, the Alpine line of pest control products contain Dinotefuran. The Alpine Insecticide Spray is unusually effective for it contains high concentrations of the potent insecticide. In atomized form, the pesticide provides a quick killing action against pests. Alpine Pressurized insecticide spray is a must-have for homes for quick and effective control of common pest insects.

Why Should You Use?

Alpine Insecticide Spray is safe to use in and around residential spaces and has been granted by the EPA a Reduced Risk status.

Directions for Use

Shake well the Alpine Insecticide aerosol can before applications. Alpine Insecticide Spray can be used for direct contact kills, crack and crevice treatments, spot treatments and space treatments. The product is ideal for use indoors or outdoors to treat infested sites, nests and areas harboring insects. Hold the product upright and direct the nozzle 12 inches away from insects/surfaces to be treated. For direct contact applications, direct the nozzle towards insects and away from persons. When treating surfaces, Treat infFor crack and crevice treatments, use the supplied actuator to apply the product inside to voids, cracks, crevices holes and other insect-harboring sites. Please read the product label for application instructions and safety precautions. Use the product as directed in the product label. Do NOT apply the product to food-handling surfaces.

Where to Apply

Alpine Pressurized Insecticide spray is for use in and around apartments, campgrounds, homes, hospitals, hotels, nursing homes, resorts, schools, warehouses, commercial buildings and industrial buildings.

Alpine Pressurized Insecticide Product Label

Alpine Pressurized Insecticide Material Safety Data Sheet (MSDS)

Alpine Pressurized Insecticide Spray - 20 oz

Developed by Whitmire-Micro Gen Laboratories, the Alpine line of pest control products contain Dinotefuran. The Alpine Insecticide Spray is unusually effective for it contains high concentrations of the potent insecticide. In atomized form, the pesticide provides a quick killing action against pests. Alpine Pressurized insecticide spray is a must-have for homes for quick and effective control of common pest insects.

Why Should You Use?

Alpine Insecticide Spray is safe to use in and around residential spaces and has been granted by the EPA a Reduced Risk status.

Directions for Use

Shake well the Alpine Insecticide aerosol can before applications. Alpine Insecticide Spray can be used for direct contact kills, crack and crevice treatments, spot treatments and space treatments. The product is ideal for use indoors or outdoors to treat infested sites, nests and areas harboring insects. Hold the product upright and direct the nozzle 12 inches away from insects/surfaces to be treated. For direct contact applications, direct the nozzle towards insects and away from persons. When treating surfaces, Treat infFor crack and crevice treatments, use the supplied actuator to apply the product inside to voids, cracks, crevices holes and other insect-harboring sites. Please read the product label for application instructions and safety precautions. Use the product as directed in the product label. Do NOT apply the product to food-handling surfaces.

Where to Apply

Alpine Pressurized Insecticide spray is for use in and around apartments, campgrounds, homes, hospitals, hotels, nursing homes, resorts, schools, warehouses, commercial buildings and industrial buildings.

Alpine Pressurized Insecticide Product Label

Alpine Pressurized Insecticide Material Safety Data Sheet (MSDS)

Alpine Pressurized Insecticide Spray - 20 oz

Developed by Whitmire-Micro Gen Laboratories, the Alpine line of pest control products contain Dinotefuran. The Alpine Insecticide Spray is unusually effective for it contains high concentrations of the potent insecticide. In atomized form, the pesticide provides a quick killing action against pests. Alpine Pressurized insecticide spray is a must-have for homes for quick and effective control of common pest insects.

Why Should You Use?

Alpine Insecticide Spray is safe to use in and around residential spaces and has been granted by the EPA a Reduced Risk status.

Directions for Use

Shake well the Alpine Insecticide aerosol can before applications. Alpine Insecticide Spray can be used for direct contact kills, crack and crevice treatments, spot treatments and space treatments. The product is ideal for use indoors or outdoors to treat infested sites, nests and areas harboring insects. Hold the product upright and direct the nozzle 12 inches away from insects/surfaces to be treated. For direct contact applications, direct the nozzle towards insects and away from persons. When treating surfaces, Treat infFor crack and crevice treatments, use the supplied actuator to apply the product inside to voids, cracks, crevices holes and other insect-harboring sites. Please read the product label for application instructions and safety precautions. Use the product as directed in the product label. Do NOT apply the product to food-handling surfaces.

Where to Apply

Alpine Pressurized Insecticide spray is for use in and around apartments, campgrounds, homes, hospitals, hotels, nursing homes, resorts, schools, warehouses, commercial buildings and industrial buildings.

Alpine Pressurized Insecticide Product Label

Alpine Pressurized Insecticide Material Safety Data Sheet (MSDS)

Alpine Pressurized Insecticide Spray - 20 oz

Developed by Whitmire-Micro Gen Laboratories, the Alpine line of pest control products contain Dinotefuran. The Alpine Insecticide Spray is unusually effective for it contains high concentrations of the potent insecticide. In atomized form, the pesticide provides a quick killing action against pests. Alpine Pressurized insecticide spray is a must-have for homes for quick and effective control of common pest insects.

Why Should You Use?

Alpine Insecticide Spray is safe to use in and around residential spaces and has been granted by the EPA a Reduced Risk status.

Directions for Use

Shake well the Alpine Insecticide aerosol can before applications. Alpine Insecticide Spray can be used for direct contact kills, crack and crevice treatments, spot treatments and space treatments. The product is ideal for use indoors or outdoors to treat infested sites, nests and areas harboring insects. Hold the product upright and direct the nozzle 12 inches away from insects/surfaces to be treated. For direct contact applications, direct the nozzle towards insects and away from persons. When treating surfaces, Treat infFor crack and crevice treatments, use the supplied actuator to apply the product inside to voids, cracks, crevices holes and other insect-harboring sites. Please read the product label for application instructions and safety precautions. Use the product as directed in the product label. Do NOT apply the product to food-handling surfaces.

Where to Apply

Alpine Pressurized Insecticide spray is for use in and around apartments, campgrounds, homes, hospitals, hotels, nursing homes, resorts, schools, warehouses, commercial buildings and industrial buildings.

Alpine Pressurized Insecticide Product Label

Alpine Pressurized Insecticide Material Safety Data Sheet (MSDS)

Alpine Pressurized Insecticide Spray - 20 oz

Developed by Whitmire-Micro Gen Laboratories, the Alpine line of pest control products contain Dinotefuran. The Alpine Insecticide Spray is unusually effective for it contains high concentrations of the potent insecticide. In atomized form, the pesticide provides a quick killing action against pests. Alpine Pressurized insecticide spray is a must-have for homes for quick and effective control of common pest insects.

Why Should You Use?

Alpine Insecticide Spray is safe to use in and around residential spaces and has been granted by the EPA a Reduced Risk status.

Directions for Use

Shake well the Alpine Insecticide aerosol can before applications. Alpine Insecticide Spray can be used for direct contact kills, crack and crevice treatments, spot treatments and space treatments. The product is ideal for use indoors or outdoors to treat infested sites, nests and areas harboring insects. Hold the product upright and direct the nozzle 12 inches away from insects/surfaces to be treated. For direct contact applications, direct the nozzle towards insects and away from persons. When treating surfaces, Treat infFor crack and crevice treatments, use the supplied actuator to apply the product inside to voids, cracks, crevices holes and other insect-harboring sites. Please read the product label for application instructions and safety precautions. Use the product as directed in the product label. Do NOT apply the product to food-handling surfaces.

Where to Apply

Alpine Pressurized Insecticide spray is for use in and around apartments, campgrounds, homes, hospitals, hotels, nursing homes, resorts, schools, warehouses, commercial buildings and industrial buildings.

Archer IGR Product Label

Archer IGR Material Safety Data Sheet (MSDS)

Archer IGR Brochure

Archer IGR - 1 Pint

Archer IGR is a powerful insect growth inhibitor which acts by disrupting the life cycles of pest insects. Archer IGR contains a growth inhibitor known as Pyriproxyfen. This active ingredient acts by preventing insects from developing into reproductive adults, to effectively control insect populations and infestations.

Archer IGR's formulation provides a residue that lasts for up to 7 months and does not break down in sunlight. When applied as directed, the product leaves no stains or odors.

Why Should You Use Archer IGR ?

Archer IGR effectively controls insect populations by preventing these pests from developing into reproducing adults.

Target Pest(s):

Ants, Cockroaches, Crickets, Carpet Beetle, Fleas, Ticks, Flies, Gnats, Midges, Mosquitoes, Moths, Litter Beetles

Directions for Archer IGR Use

Archer IGR can be used for crack and crevice treatments, surface treatments and perimeter treatments. Use Archer IGR as directed in the product label. Please refer to the product label and MSDS sheets for application instructions and precautions.

For best results, Archer IGR should be applied using sprayers. Before applications, spray equipment should be thoroughly cleaned and checked for leaks.

Mix Archer IGR to water as recommended in the product label. Mix 2 fluid ounces of the product to a gallon of water to control ants, cockroaches and crickets. To control fleas, ticks, carpet beetles, dermestids and flying insects, mix one fluid ounce of Archer IGR to a gallon of water.

Where to Apply Archer IGR

Archer IGR can be used in and around homes, apartments, schools, warehouses, commercial buildings, public buildings, industrial buildings, non-food handling and processing areas, transport vehicles and animal housing facilities.

Archer IGR Product Label

Archer IGR Material Safety Data Sheet (MSDS)

Archer IGR Brochure

Archer IGR - 1 Pint

Archer IGR is a powerful insect growth inhibitor which acts by disrupting the life cycles of pest insects. Archer IGR contains a growth inhibitor known as Pyriproxyfen. This active ingredient acts by preventing insects from developing into reproductive adults, to effectively control insect populations and infestations.

Archer IGR's formulation provides a residue that lasts for up to 7 months and does not break down in sunlight. When applied as directed, the product leaves no stains or odors.

Why Should You Use Archer IGR ?

Archer IGR effectively controls insect populations by preventing these pests from developing into reproducing adults.

Target Pest(s):

Ants, Cockroaches, Crickets, Carpet Beetle, Fleas, Ticks, Flies, Gnats, Midges, Mosquitoes, Moths, Litter Beetles

Directions for Archer IGR Use

Archer IGR can be used for crack and crevice treatments, surface treatments and perimeter treatments. Use Archer IGR as directed in the product label. Please refer to the product label and MSDS sheets for application instructions and precautions.

For best results, Archer IGR should be applied using sprayers. Before applications, spray equipment should be thoroughly cleaned and checked for leaks.

Mix Archer IGR to water as recommended in the product label. Mix 2 fluid ounces of the product to a gallon of water to control ants, cockroaches and crickets. To control fleas, ticks, carpet beetles, dermestids and flying insects, mix one fluid ounce of Archer IGR to a gallon of water.

Where to Apply Archer IGR

Archer IGR can be used in and around homes, apartments, schools, warehouses, commercial buildings, public buildings, industrial buildings, non-food handling and processing areas, transport vehicles and animal housing facilities.

Archer IGR Product Label

Archer IGR Material Safety Data Sheet (MSDS)

Archer IGR Brochure

Archer IGR - 1 Pint

Archer IGR is a powerful insect growth inhibitor which acts by disrupting the life cycles of pest insects. Archer IGR contains a growth inhibitor known as Pyriproxyfen. This active ingredient acts by preventing insects from developing into reproductive adults, to effectively control insect populations and infestations.

Archer IGR's formulation provides a residue that lasts for up to 7 months and does not break down in sunlight. When applied as directed, the product leaves no stains or odors.

Why Should You Use Archer IGR ?

Archer IGR effectively controls insect populations by preventing these pests from developing into reproducing adults.

Target Pest(s):

Ants, Cockroaches, Crickets, Carpet Beetle, Fleas, Ticks, Flies, Gnats, Midges, Mosquitoes, Moths, Litter Beetles

Directions for Archer IGR Use

Archer IGR can be used for crack and crevice treatments, surface treatments and perimeter treatments. Use Archer IGR as directed in the product label. Please refer to the product label and MSDS sheets for application instructions and precautions.

For best results, Archer IGR should be applied using sprayers. Before applications, spray equipment should be thoroughly cleaned and checked for leaks.

Mix Archer IGR to water as recommended in the product label. Mix 2 fluid ounces of the product to a gallon of water to control ants, cockroaches and crickets. To control fleas, ticks, carpet beetles, dermestids and flying insects, mix one fluid ounce of Archer IGR to a gallon of water.

Where to Apply Archer IGR

Archer IGR can be used in and around homes, apartments, schools, warehouses, commercial buildings, public buildings, industrial buildings, non-food handling and processing areas, transport vehicles and animal housing facilities.

Archer IGR Product Label

Archer IGR Material Safety Data Sheet (MSDS)

Archer IGR Brochure

Archer IGR - 1 Pint

Archer IGR is a powerful insect growth inhibitor which acts by disrupting the life cycles of pest insects. Archer IGR contains a growth inhibitor known as Pyriproxyfen. This active ingredient acts by preventing insects from developing into reproductive adults, to effectively control insect populations and infestations.

Archer IGR's formulation provides a residue that lasts for up to 7 months and does not break down in sunlight. When applied as directed, the product leaves no stains or odors.

Why Should You Use Archer IGR ?

Archer IGR effectively controls insect populations by preventing these pests from developing into reproducing adults.

Target Pest(s):

Ants, Cockroaches, Crickets, Carpet Beetle, Fleas, Ticks, Flies, Gnats, Midges, Mosquitoes, Moths, Litter Beetles

Directions for Archer IGR Use

Archer IGR can be used for crack and crevice treatments, surface treatments and perimeter treatments. Use Archer IGR as directed in the product label. Please refer to the product label and MSDS sheets for application instructions and precautions.

For best results, Archer IGR should be applied using sprayers. Before applications, spray equipment should be thoroughly cleaned and checked for leaks.

Mix Archer IGR to water as recommended in the product label. Mix 2 fluid ounces of the product to a gallon of water to control ants, cockroaches and crickets. To control fleas, ticks, carpet beetles, dermestids and flying insects, mix one fluid ounce of Archer IGR to a gallon of water.

Where to Apply Archer IGR

Archer IGR can be used in and around homes, apartments, schools, warehouses, commercial buildings, public buildings, industrial buildings, non-food handling and processing areas, transport vehicles and animal housing facilities.

Archer IGR Product Label

Archer IGR Material Safety Data Sheet (MSDS)

Archer IGR Brochure

Archer IGR - 1 Pint

Archer IGR is a powerful insect growth inhibitor which acts by disrupting the life cycles of pest insects. Archer IGR contains a growth inhibitor known as Pyriproxyfen. This active ingredient acts by preventing insects from developing into reproductive adults, to effectively control insect populations and infestations.

Archer IGR's formulation provides a residue that lasts for up to 7 months and does not break down in sunlight. When applied as directed, the product leaves no stains or odors.

Why Should You Use Archer IGR ?

Archer IGR effectively controls insect populations by preventing these pests from developing into reproducing adults.

Target Pest(s):

Ants, Cockroaches, Crickets, Carpet Beetle, Fleas, Ticks, Flies, Gnats, Midges, Mosquitoes, Moths, Litter Beetles

Directions for Archer IGR Use

Archer IGR can be used for crack and crevice treatments, surface treatments and perimeter treatments. Use Archer IGR as directed in the product label. Please refer to the product label and MSDS sheets for application instructions and precautions.

For best results, Archer IGR should be applied using sprayers. Before applications, spray equipment should be thoroughly cleaned and checked for leaks.

Mix Archer IGR to water as recommended in the product label. Mix 2 fluid ounces of the product to a gallon of water to control ants, cockroaches and crickets. To control fleas, ticks, carpet beetles, dermestids and flying insects, mix one fluid ounce of Archer IGR to a gallon of water.

Where to Apply Archer IGR

Archer IGR can be used in and around homes, apartments, schools, warehouses, commercial buildings, public buildings, industrial buildings, non-food handling and processing areas, transport vehicles and animal housing facilities.

Archer IGR Product Label

Archer IGR Material Safety Data Sheet (MSDS)

Archer IGR Brochure

Archer IGR - 1 Pint

Archer IGR is a powerful insect growth inhibitor which acts by disrupting the life cycles of pest insects. Archer IGR contains a growth inhibitor known as Pyriproxyfen. This active ingredient acts by preventing insects from developing into reproductive adults, to effectively control insect populations and infestations.

Archer IGR's formulation provides a residue that lasts for up to 7 months and does not break down in sunlight. When applied as directed, the product leaves no stains or odors.

Why Should You Use Archer IGR ?

Archer IGR effectively controls insect populations by preventing these pests from developing into reproducing adults.

Target Pest(s):

Ants, Cockroaches, Crickets, Carpet Beetle, Fleas, Ticks, Flies, Gnats, Midges, Mosquitoes, Moths, Litter Beetles

Directions for Archer IGR Use

Archer IGR can be used for crack and crevice treatments, surface treatments and perimeter treatments. Use Archer IGR as directed in the product label. Please refer to the product label and MSDS sheets for application instructions and precautions.

For best results, Archer IGR should be applied using sprayers. Before applications, spray equipment should be thoroughly cleaned and checked for leaks.

Mix Archer IGR to water as recommended in the product label. Mix 2 fluid ounces of the product to a gallon of water to control ants, cockroaches and crickets. To control fleas, ticks, carpet beetles, dermestids and flying insects, mix one fluid ounce of Archer IGR to a gallon of water.

Where to Apply Archer IGR

Archer IGR can be used in and around homes, apartments, schools, warehouses, commercial buildings, public buildings, industrial buildings, non-food handling and processing areas, transport vehicles and animal housing facilities.

Archer IGR Product Label

Archer IGR Material Safety Data Sheet (MSDS)

Archer IGR Brochure

Archer IGR - 1 Pint

Archer IGR is a powerful insect growth inhibitor which acts by disrupting the life cycles of pest insects. Archer IGR contains a growth inhibitor known as Pyriproxyfen. This active ingredient acts by preventing insects from developing into reproductive adults, to effectively control insect populations and infestations.

Archer IGR's formulation provides a residue that lasts for up to 7 months and does not break down in sunlight. When applied as directed, the product leaves no stains or odors.

Why Should You Use Archer IGR ?

Archer IGR effectively controls insect populations by preventing these pests from developing into reproducing adults.

Target Pest(s):

Ants, Cockroaches, Crickets, Carpet Beetle, Fleas, Ticks, Flies, Gnats, Midges, Mosquitoes, Moths, Litter Beetles

Directions for Archer IGR Use

Archer IGR can be used for crack and crevice treatments, surface treatments and perimeter treatments. Use Archer IGR as directed in the product label. Please refer to the product label and MSDS sheets for application instructions and precautions.

For best results, Archer IGR should be applied using sprayers. Before applications, spray equipment should be thoroughly cleaned and checked for leaks.

Mix Archer IGR to water as recommended in the product label. Mix 2 fluid ounces of the product to a gallon of water to control ants, cockroaches and crickets. To control fleas, ticks, carpet beetles, dermestids and flying insects, mix one fluid ounce of Archer IGR to a gallon of water.

Where to Apply Archer IGR

Archer IGR can be used in and around homes, apartments, schools, warehouses, commercial buildings, public buildings, industrial buildings, non-food handling and processing areas, transport vehicles and animal housing facilities.

Archer IGR Product Label

Archer IGR Material Safety Data Sheet (MSDS)

Archer IGR Brochure

Archer IGR - 1 Pint

Archer IGR is a powerful insect growth inhibitor which acts by disrupting the life cycles of pest insects. Archer IGR contains a growth inhibitor known as Pyriproxyfen. This active ingredient acts by preventing insects from developing into reproductive adults, to effectively control insect populations and infestations.

Archer IGR's formulation provides a residue that lasts for up to 7 months and does not break down in sunlight. When applied as directed, the product leaves no stains or odors.

Why Should You Use Archer IGR ?

Archer IGR effectively controls insect populations by preventing these pests from developing into reproducing adults.

Target Pest(s):

Ants, Cockroaches, Crickets, Carpet Beetle, Fleas, Ticks, Flies, Gnats, Midges, Mosquitoes, Moths, Litter Beetles

Directions for Archer IGR Use

Archer IGR can be used for crack and crevice treatments, surface treatments and perimeter treatments. Use Archer IGR as directed in the product label. Please refer to the product label and MSDS sheets for application instructions and precautions.

For best results, Archer IGR should be applied using sprayers. Before applications, spray equipment should be thoroughly cleaned and checked for leaks.

Mix Archer IGR to water as recommended in the product label. Mix 2 fluid ounces of the product to a gallon of water to control ants, cockroaches and crickets. To control fleas, ticks, carpet beetles, dermestids and flying insects, mix one fluid ounce of Archer IGR to a gallon of water.

Where to Apply Archer IGR

Archer IGR can be used in and around homes, apartments, schools, warehouses, commercial buildings, public buildings, industrial buildings, non-food handling and processing areas, transport vehicles and animal housing facilities.

Avert Dry Flowable Bait Product Label

Avert Dry Flowable Bait Material Safety Data Sheet (MSDS)

Avert Dry Flowable Cockroach Bait

Avert Dry Flowable Cockroach Bait is a highly attractive cockroach bait in powder form. Its formulation contains a very potent insecticide known as Abamectin. Widely used in pest control, Abamectin is highly toxic to a wide range of insects including cockroaches. Upon ingesting, the active ingredient impairs cockroach nervous systems. The bait also spread when cockroaches preen themselves or make contact with other cockroaches exposed to the bait, leading to effective control. Each 30 gram tube contains up to 200 bait placements.

Why Should You Use Avert Dry Flowable Cockroach Bait?

Avert Dry Flowable Cockroach Bait lasts longer than gel baits. When applied, the product leaves a residue that is highly attractive to even to bait-averse roaches.

Target Pest(s):

Avert Dry Flowable Cockroach Bait is specially formulated to control cockroaches.

Directions for Avert Dry Flowable Cockroach Bait Use

Using application equipment such as dusters, apply Avert Dry Flowable Cockroach Bait as directed in the product label. Using the supplied duster, apply the product uniformly to infested areas for effective control. The product can be applied directly to cracks and crevices, infested areas and other areas with high cockroach activity. Apply the product to areas where cockroach frequent such as voids, cracks and crevices, under sinks, cabinets, water pipes and potential cockroach-harboring sites. Place 4 to 6 bait stations per 100 square feet for light infestations. For heavy infestations, place 12 to 24 bait stations per 100 square feet of treatment area. Inspect the bait placements regularly and reapply if necessary.

Please read the product label for directions and treatment recommendations.

Where to Apply Avert Dry Flowable Cockroach Bait

Aver Dry Flowable Cockroach Bait is for use in and around homes, apartments, hospitals, garages, food storage areas, hotels, schools, warehouses, commercial buildings and industrial buildings.

Avert Dry Flowable Bait Product Label

Avert Dry Flowable Bait Material Safety Data Sheet (MSDS)

Avert Dry Flowable Cockroach Bait

Avert Dry Flowable Cockroach Bait is a highly attractive cockroach bait in powder form. Its formulation contains a very potent insecticide known as Abamectin. Widely used in pest control, Abamectin is highly toxic to a wide range of insects including cockroaches. Upon ingesting, the active ingredient impairs cockroach nervous systems. The bait also spread when cockroaches preen themselves or make contact with other cockroaches exposed to the bait, leading to effective control. Each 30 gram tube contains up to 200 bait placements.

Why Should You Use Avert Dry Flowable Cockroach Bait?

Avert Dry Flowable Cockroach Bait lasts longer than gel baits. When applied, the product leaves a residue that is highly attractive to even to bait-averse roaches.

Target Pest(s):

Avert Dry Flowable Cockroach Bait is specially formulated to control cockroaches.

Directions for Avert Dry Flowable Cockroach Bait Use

Using application equipment such as dusters, apply Avert Dry Flowable Cockroach Bait as directed in the product label. Using the supplied duster, apply the product uniformly to infested areas for effective control. The product can be applied directly to cracks and crevices, infested areas and other areas with high cockroach activity. Apply the product to areas where cockroach frequent such as voids, cracks and crevices, under sinks, cabinets, water pipes and potential cockroach-harboring sites. Place 4 to 6 bait stations per 100 square feet for light infestations. For heavy infestations, place 12 to 24 bait stations per 100 square feet of treatment area. Inspect the bait placements regularly and reapply if necessary.

Please read the product label for directions and treatment recommendations.

Where to Apply Avert Dry Flowable Cockroach Bait

Aver Dry Flowable Cockroach Bait is for use in and around homes, apartments, hospitals, garages, food storage areas, hotels, schools, warehouses, commercial buildings and industrial buildings.

Avert Dry Flowable Bait Product Label

Avert Dry Flowable Bait Material Safety Data Sheet (MSDS)

Avert Dry Flowable Cockroach Bait

Avert Dry Flowable Cockroach Bait is a highly attractive cockroach bait in powder form. Its formulation contains a very potent insecticide known as Abamectin. Widely used in pest control, Abamectin is highly toxic to a wide range of insects including cockroaches. Upon ingesting, the active ingredient impairs cockroach nervous systems. The bait also spread when cockroaches preen themselves or make contact with other cockroaches exposed to the bait, leading to effective control. Each 30 gram tube contains up to 200 bait placements.

Why Should You Use Avert Dry Flowable Cockroach Bait?

Avert Dry Flowable Cockroach Bait lasts longer than gel baits. When applied, the product leaves a residue that is highly attractive to even to bait-averse roaches.

Target Pest(s):

Avert Dry Flowable Cockroach Bait is specially formulated to control cockroaches.

Directions for Avert Dry Flowable Cockroach Bait Use

Using application equipment such as dusters, apply Avert Dry Flowable Cockroach Bait as directed in the product label. Using the supplied duster, apply the product uniformly to infested areas for effective control. The product can be applied directly to cracks and crevices, infested areas and other areas with high cockroach activity. Apply the product to areas where cockroach frequent such as voids, cracks and crevices, under sinks, cabinets, water pipes and potential cockroach-harboring sites. Place 4 to 6 bait stations per 100 square feet for light infestations. For heavy infestations, place 12 to 24 bait stations per 100 square feet of treatment area. Inspect the bait placements regularly and reapply if necessary.

Please read the product label for directions and treatment recommendations.

Where to Apply Avert Dry Flowable Cockroach Bait

Aver Dry Flowable Cockroach Bait is for use in and around homes, apartments, hospitals, garages, food storage areas, hotels, schools, warehouses, commercial buildings and industrial buildings.

Avert Dry Flowable Bait Product Label

Avert Dry Flowable Bait Material Safety Data Sheet (MSDS)

Avert Dry Flowable Cockroach Bait

Avert Dry Flowable Cockroach Bait is a highly attractive cockroach bait in powder form. Its formulation contains a very potent insecticide known as Abamectin. Widely used in pest control, Abamectin is highly toxic to a wide range of insects including cockroaches. Upon ingesting, the active ingredient impairs cockroach nervous systems. The bait also spread when cockroaches preen themselves or make contact with other cockroaches exposed to the bait, leading to effective control. Each 30 gram tube contains up to 200 bait placements.

Why Should You Use Avert Dry Flowable Cockroach Bait?

Avert Dry Flowable Cockroach Bait lasts longer than gel baits. When applied, the product leaves a residue that is highly attractive to even to bait-averse roaches.

Target Pest(s):

Avert Dry Flowable Cockroach Bait is specially formulated to control cockroaches.

Directions for Avert Dry Flowable Cockroach Bait Use

Using application equipment such as dusters, apply Avert Dry Flowable Cockroach Bait as directed in the product label. Using the supplied duster, apply the product uniformly to infested areas for effective control. The product can be applied directly to cracks and crevices, infested areas and other areas with high cockroach activity. Apply the product to areas where cockroach frequent such as voids, cracks and crevices, under sinks, cabinets, water pipes and potential cockroach-harboring sites. Place 4 to 6 bait stations per 100 square feet for light infestations. For heavy infestations, place 12 to 24 bait stations per 100 square feet of treatment area. Inspect the bait placements regularly and reapply if necessary.

Please read the product label for directions and treatment recommendations.

Where to Apply Avert Dry Flowable Cockroach Bait

Aver Dry Flowable Cockroach Bait is for use in and around homes, apartments, hospitals, garages, food storage areas, hotels, schools, warehouses, commercial buildings and industrial buildings.

Avert Dry Flowable Bait Product Label

Avert Dry Flowable Bait Material Safety Data Sheet (MSDS)

Avert Dry Flowable Cockroach Bait

Avert Dry Flowable Cockroach Bait is a highly attractive cockroach bait in powder form. Its formulation contains a very potent insecticide known as Abamectin. Widely used in pest control, Abamectin is highly toxic to a wide range of insects including cockroaches. Upon ingesting, the active ingredient impairs cockroach nervous systems. The bait also spread when cockroaches preen themselves or make contact with other cockroaches exposed to the bait, leading to effective control. Each 30 gram tube contains up to 200 bait placements.

Why Should You Use Avert Dry Flowable Cockroach Bait?

Avert Dry Flowable Cockroach Bait lasts longer than gel baits. When applied, the product leaves a residue that is highly attractive to even to bait-averse roaches.

Target Pest(s):

Avert Dry Flowable Cockroach Bait is specially formulated to control cockroaches.

Directions for Avert Dry Flowable Cockroach Bait Use

Using application equipment such as dusters, apply Avert Dry Flowable Cockroach Bait as directed in the product label. Using the supplied duster, apply the product uniformly to infested areas for effective control. The product can be applied directly to cracks and crevices, infested areas and other areas with high cockroach activity. Apply the product to areas where cockroach frequent such as voids, cracks and crevices, under sinks, cabinets, water pipes and potential cockroach-harboring sites. Place 4 to 6 bait stations per 100 square feet for light infestations. For heavy infestations, place 12 to 24 bait stations per 100 square feet of treatment area. Inspect the bait placements regularly and reapply if necessary.

Please read the product label for directions and treatment recommendations.

Where to Apply Avert Dry Flowable Cockroach Bait

Aver Dry Flowable Cockroach Bait is for use in and around homes, apartments, hospitals, garages, food storage areas, hotels, schools, warehouses, commercial buildings and industrial buildings.

Avert Dry Flowable Bait Product Label

Avert Dry Flowable Bait Material Safety Data Sheet (MSDS)

Avert Dry Flowable Cockroach Bait

Avert Dry Flowable Cockroach Bait is a highly attractive cockroach bait in powder form. Its formulation contains a very potent insecticide known as Abamectin. Widely used in pest control, Abamectin is highly toxic to a wide range of insects including cockroaches. Upon ingesting, the active ingredient impairs cockroach nervous systems. The bait also spread when cockroaches preen themselves or make contact with other cockroaches exposed to the bait, leading to effective control. Each 30 gram tube contains up to 200 bait placements.

Why Should You Use Avert Dry Flowable Cockroach Bait?

Avert Dry Flowable Cockroach Bait lasts longer than gel baits. When applied, the product leaves a residue that is highly attractive to even to bait-averse roaches.

Target Pest(s):

Avert Dry Flowable Cockroach Bait is specially formulated to control cockroaches.

Directions for Avert Dry Flowable Cockroach Bait Use

Using application equipment such as dusters, apply Avert Dry Flowable Cockroach Bait as directed in the product label. Using the supplied duster, apply the product uniformly to infested areas for effective control. The product can be applied directly to cracks and crevices, infested areas and other areas with high cockroach activity. Apply the product to areas where cockroach frequent such as voids, cracks and crevices, under sinks, cabinets, water pipes and potential cockroach-harboring sites. Place 4 to 6 bait stations per 100 square feet for light infestations. For heavy infestations, place 12 to 24 bait stations per 100 square feet of treatment area. Inspect the bait placements regularly and reapply if necessary.

Please read the product label for directions and treatment recommendations.

Where to Apply Avert Dry Flowable Cockroach Bait

Aver Dry Flowable Cockroach Bait is for use in and around homes, apartments, hospitals, garages, food storage areas, hotels, schools, warehouses, commercial buildings and industrial buildings.

Avert Dry Flowable Bait Product Label

Avert Dry Flowable Bait Material Safety Data Sheet (MSDS)

Avert Dry Flowable Cockroach Bait

Avert Dry Flowable Cockroach Bait is a highly attractive cockroach bait in powder form. Its formulation contains a very potent insecticide known as Abamectin. Widely used in pest control, Abamectin is highly toxic to a wide range of insects including cockroaches. Upon ingesting, the active ingredient impairs cockroach nervous systems. The bait also spread when cockroaches preen themselves or make contact with other cockroaches exposed to the bait, leading to effective control. Each 30 gram tube contains up to 200 bait placements.

Why Should You Use Avert Dry Flowable Cockroach Bait?

Avert Dry Flowable Cockroach Bait lasts longer than gel baits. When applied, the product leaves a residue that is highly attractive to even to bait-averse roaches.

Target Pest(s):

Avert Dry Flowable Cockroach Bait is specially formulated to control cockroaches.

Directions for Avert Dry Flowable Cockroach Bait Use

Using application equipment such as dusters, apply Avert Dry Flowable Cockroach Bait as directed in the product label. Using the supplied duster, apply the product uniformly to infested areas for effective control. The product can be applied directly to cracks and crevices, infested areas and other areas with high cockroach activity. Apply the product to areas where cockroach frequent such as voids, cracks and crevices, under sinks, cabinets, water pipes and potential cockroach-harboring sites. Place 4 to 6 bait stations per 100 square feet for light infestations. For heavy infestations, place 12 to 24 bait stations per 100 square feet of treatment area. Inspect the bait placements regularly and reapply if necessary.

Please read the product label for directions and treatment recommendations.

Where to Apply Avert Dry Flowable Cockroach Bait

Aver Dry Flowable Cockroach Bait is for use in and around homes, apartments, hospitals, garages, food storage areas, hotels, schools, warehouses, commercial buildings and industrial buildings.

Orthen Pco Product Label

Orthen Pco Material Safety Data Sheet

Orthene PCO Pellets Indoor Spray (For Use Only By Professional Applicators)

Orthene PCO Pellets -1 Box (10 packets)

Orthene PCO is a restricted-use insecticide for use only by professional pest control applicators. Used primarily for residual control of common household pests, Orthene Pellets are ideal complements to baits and other control products. Fast-acting, long lasting and economical, this product guarantees to control light and heavy infestations of even the most persistent pests.

Why Should You Use Orthene PCO Pellets?

Orthene PCO eliminates hard to control pests resistant to other insecticides. Orthene produces exceptional results when used together with compatible products.

Directions for Orthene PCO Pellets Use

Orthene PCO Pellets can be used for residual control of targeted pests by applying diluted solutions containing 0.75% or 1.0% of active ingredient. Use 0.75% active ingredient content for light infestations and 1.0% for heavy infestations.

Apply the product as a coarse spray, spot spray, crack and crevice spray to infested areas. Pay particular attention to cracks, crevices, voids, under sinks, under and behind refrigerators, appliances where pests are normally found. Maximum efficiency against cockroaches is reached around 3-7 days from applications.

Apply as a spot application using 0.5% to 0.10% dilutions to wasp nest entrances and surrounding areas. For best results, treat nests early or late in the day where wasps are less active:

Apply 0.5% to 0.10% Orthene PCO dilutions to a band of soil measuring 6 to 10 feet adjacent to structures. Treat foundations to a height of 2 to 3 feet and coat/spray building surfaces such as window sills, frames, screens, eaves, garages, patios and garbage areas.

Dissolve 1.4 ounces of Orthene PCO Pellets to 9 gallons of water. Uniformly apply the finished solution over mounds and its immediate surroundings.

Where to Use Orthene PCO Pellets

Use Orthene PCO Pellets to treat infestations in Industrial, Institutional, and Commercial Buildings including Restaurants, Warehouses, Stores, Hospitals, Hotels, Manufacturing Plants and Ships.

Orthen Pco Product Label

Orthen Pco Material Safety Data Sheet

Orthene PCO Pellets Indoor Spray (For Use Only By Professional Applicators)

Orthene PCO Pellets -1 Box (10 packets)

Orthene PCO is a restricted-use insecticide for use only by professional pest control applicators. Used primarily for residual control of common household pests, Orthene Pellets are ideal complements to baits and other control products. Fast-acting, long lasting and economical, this product guarantees to control light and heavy infestations of even the most persistent pests.

Why Should You Use Orthene PCO Pellets?

Orthene PCO eliminates hard to control pests resistant to other insecticides. Orthene produces exceptional results when used together with compatible products.

Directions for Orthene PCO Pellets Use

Orthene PCO Pellets can be used for residual control of targeted pests by applying diluted solutions containing 0.75% or 1.0% of active ingredient. Use 0.75% active ingredient content for light infestations and 1.0% for heavy infestations.

Apply the product as a coarse spray, spot spray, crack and crevice spray to infested areas. Pay particular attention to cracks, crevices, voids, under sinks, under and behind refrigerators, appliances where pests are normally found. Maximum efficiency against cockroaches is reached around 3-7 days from applications.

Apply as a spot application using 0.5% to 0.10% dilutions to wasp nest entrances and surrounding areas. For best results, treat nests early or late in the day where wasps are less active:

Apply 0.5% to 0.10% Orthene PCO dilutions to a band of soil measuring 6 to 10 feet adjacent to structures. Treat foundations to a height of 2 to 3 feet and coat/spray building surfaces such as window sills, frames, screens, eaves, garages, patios and garbage areas.

Dissolve 1.4 ounces of Orthene PCO Pellets to 9 gallons of water. Uniformly apply the finished solution over mounds and its immediate surroundings.

Where to Use Orthene PCO Pellets

Use Orthene PCO Pellets to treat infestations in Industrial, Institutional, and Commercial Buildings including Restaurants, Warehouses, Stores, Hospitals, Hotels, Manufacturing Plants and Ships.

Orthen Pco Product Label

Orthen Pco Material Safety Data Sheet

Orthene PCO Pellets Indoor Spray (For Use Only By Professional Applicators)

Orthene PCO Pellets -1 Box (10 packets)

Orthene PCO is a restricted-use insecticide for use only by professional pest control applicators. Used primarily for residual control of common household pests, Orthene Pellets are ideal complements to baits and other control products. Fast-acting, long lasting and economical, this product guarantees to control light and heavy infestations of even the most persistent pests.

Why Should You Use Orthene PCO Pellets?

Orthene PCO eliminates hard to control pests resistant to other insecticides. Orthene produces exceptional results when used together with compatible products.

Directions for Orthene PCO Pellets Use

Orthene PCO Pellets can be used for residual control of targeted pests by applying diluted solutions containing 0.75% or 1.0% of active ingredient. Use 0.75% active ingredient content for light infestations and 1.0% for heavy infestations.

Apply the product as a coarse spray, spot spray, crack and crevice spray to infested areas. Pay particular attention to cracks, crevices, voids, under sinks, under and behind refrigerators, appliances where pests are normally found. Maximum efficiency against cockroaches is reached around 3-7 days from applications.

Apply as a spot application using 0.5% to 0.10% dilutions to wasp nest entrances and surrounding areas. For best results, treat nests early or late in the day where wasps are less active:

Apply 0.5% to 0.10% Orthene PCO dilutions to a band of soil measuring 6 to 10 feet adjacent to structures. Treat foundations to a height of 2 to 3 feet and coat/spray building surfaces such as window sills, frames, screens, eaves, garages, patios and garbage areas.

Dissolve 1.4 ounces of Orthene PCO Pellets to 9 gallons of water. Uniformly apply the finished solution over mounds and its immediate surroundings.

Where to Use Orthene PCO Pellets

Use Orthene PCO Pellets to treat infestations in Industrial, Institutional, and Commercial Buildings including Restaurants, Warehouses, Stores, Hospitals, Hotels, Manufacturing Plants and Ships.

Orthen Pco Product Label

Orthen Pco Material Safety Data Sheet

Orthene PCO Pellets Indoor Spray (For Use Only By Professional Applicators)

Orthene PCO Pellets -1 Box (10 packets)

Orthene PCO is a restricted-use insecticide for use only by professional pest control applicators. Used primarily for residual control of common household pests, Orthene Pellets are ideal complements to baits and other control products. Fast-acting, long lasting and economical, this product guarantees to control light and heavy infestations of even the most persistent pests.

Why Should You Use Orthene PCO Pellets?

Orthene PCO eliminates hard to control pests resistant to other insecticides. Orthene produces exceptional results when used together with compatible products.

Directions for Orthene PCO Pellets Use

Orthene PCO Pellets can be used for residual control of targeted pests by applying diluted solutions containing 0.75% or 1.0% of active ingredient. Use 0.75% active ingredient content for light infestations and 1.0% for heavy infestations.

Apply the product as a coarse spray, spot spray, crack and crevice spray to infested areas. Pay particular attention to cracks, crevices, voids, under sinks, under and behind refrigerators, appliances where pests are normally found. Maximum efficiency against cockroaches is reached around 3-7 days from applications.

Apply as a spot application using 0.5% to 0.10% dilutions to wasp nest entrances and surrounding areas. For best results, treat nests early or late in the day where wasps are less active:

Apply 0.5% to 0.10% Orthene PCO dilutions to a band of soil measuring 6 to 10 feet adjacent to structures. Treat foundations to a height of 2 to 3 feet and coat/spray building surfaces such as window sills, frames, screens, eaves, garages, patios and garbage areas.

Dissolve 1.4 ounces of Orthene PCO Pellets to 9 gallons of water. Uniformly apply the finished solution over mounds and its immediate surroundings.

Where to Use Orthene PCO Pellets

Use Orthene PCO Pellets to treat infestations in Industrial, Institutional, and Commercial Buildings including Restaurants, Warehouses, Stores, Hospitals, Hotels, Manufacturing Plants and Ships.

Orthen Pco Product Label

Orthen Pco Material Safety Data Sheet

Orthene PCO Pellets Indoor Spray (For Use Only By Professional Applicators)

Orthene PCO Pellets -1 Box (10 packets)

Orthene PCO is a restricted-use insecticide for use only by professional pest control applicators. Used primarily for residual control of common household pests, Orthene Pellets are ideal complements to baits and other control products. Fast-acting, long lasting and economical, this product guarantees to control light and heavy infestations of even the most persistent pests.

Why Should You Use Orthene PCO Pellets?

Orthene PCO eliminates hard to control pests resistant to other insecticides. Orthene produces exceptional results when used together with compatible products.

Directions for Orthene PCO Pellets Use

Orthene PCO Pellets can be used for residual control of targeted pests by applying diluted solutions containing 0.75% or 1.0% of active ingredient. Use 0.75% active ingredient content for light infestations and 1.0% for heavy infestations.

Apply the product as a coarse spray, spot spray, crack and crevice spray to infested areas. Pay particular attention to cracks, crevices, voids, under sinks, under and behind refrigerators, appliances where pests are normally found. Maximum efficiency against cockroaches is reached around 3-7 days from applications.

Apply as a spot application using 0.5% to 0.10% dilutions to wasp nest entrances and surrounding areas. For best results, treat nests early or late in the day where wasps are less active:

Apply 0.5% to 0.10% Orthene PCO dilutions to a band of soil measuring 6 to 10 feet adjacent to structures. Treat foundations to a height of 2 to 3 feet and coat/spray building surfaces such as window sills, frames, screens, eaves, garages, patios and garbage areas.

Dissolve 1.4 ounces of Orthene PCO Pellets to 9 gallons of water. Uniformly apply the finished solution over mounds and its immediate surroundings.

Where to Use Orthene PCO Pellets

Use Orthene PCO Pellets to treat infestations in Industrial, Institutional, and Commercial Buildings including Restaurants, Warehouses, Stores, Hospitals, Hotels, Manufacturing Plants and Ships.

Orthen Pco Product Label

Orthen Pco Material Safety Data Sheet

Orthene PCO Pellets Indoor Spray (For Use Only By Professional Applicators)

Orthene PCO Pellets -1 Box (10 packets)

Orthene PCO is a restricted-use insecticide for use only by professional pest control applicators. Used primarily for residual control of common household pests, Orthene Pellets are ideal complements to baits and other control products. Fast-acting, long lasting and economical, this product guarantees to control light and heavy infestations of even the most persistent pests.

Why Should You Use Orthene PCO Pellets?

Orthene PCO eliminates hard to control pests resistant to other insecticides. Orthene produces exceptional results when used together with compatible products.

Directions for Orthene PCO Pellets Use

Orthene PCO Pellets can be used for residual control of targeted pests by applying diluted solutions containing 0.75% or 1.0% of active ingredient. Use 0.75% active ingredient content for light infestations and 1.0% for heavy infestations.

Apply the product as a coarse spray, spot spray, crack and crevice spray to infested areas. Pay particular attention to cracks, crevices, voids, under sinks, under and behind refrigerators, appliances where pests are normally found. Maximum efficiency against cockroaches is reached around 3-7 days from applications.

Apply as a spot application using 0.5% to 0.10% dilutions to wasp nest entrances and surrounding areas. For best results, treat nests early or late in the day where wasps are less active:

Apply 0.5% to 0.10% Orthene PCO dilutions to a band of soil measuring 6 to 10 feet adjacent to structures. Treat foundations to a height of 2 to 3 feet and coat/spray building surfaces such as window sills, frames, screens, eaves, garages, patios and garbage areas.

Dissolve 1.4 ounces of Orthene PCO Pellets to 9 gallons of water. Uniformly apply the finished solution over mounds and its immediate surroundings.

Where to Use Orthene PCO Pellets

Use Orthene PCO Pellets to treat infestations in Industrial, Institutional, and Commercial Buildings including Restaurants, Warehouses, Stores, Hospitals, Hotels, Manufacturing Plants and Ships.

Orthen Pco Product Label

Orthen Pco Material Safety Data Sheet

Orthene PCO Pellets Indoor Spray (For Use Only By Professional Applicators)

Orthene PCO Pellets -1 Box (10 packets)

Orthene PCO is a restricted-use insecticide for use only by professional pest control applicators. Used primarily for residual control of common household pests, Orthene Pellets are ideal complements to baits and other control products. Fast-acting, long lasting and economical, this product guarantees to control light and heavy infestations of even the most persistent pests.

Why Should You Use Orthene PCO Pellets?

Orthene PCO eliminates hard to control pests resistant to other insecticides. Orthene produces exceptional results when used together with compatible products.

Directions for Orthene PCO Pellets Use

Orthene PCO Pellets can be used for residual control of targeted pests by applying diluted solutions containing 0.75% or 1.0% of active ingredient. Use 0.75% active ingredient content for light infestations and 1.0% for heavy infestations.

Apply the product as a coarse spray, spot spray, crack and crevice spray to infested areas. Pay particular attention to cracks, crevices, voids, under sinks, under and behind refrigerators, appliances where pests are normally found. Maximum efficiency against cockroaches is reached around 3-7 days from applications.

Apply as a spot application using 0.5% to 0.10% dilutions to wasp nest entrances and surrounding areas. For best results, treat nests early or late in the day where wasps are less active:

Apply 0.5% to 0.10% Orthene PCO dilutions to a band of soil measuring 6 to 10 feet adjacent to structures. Treat foundations to a height of 2 to 3 feet and coat/spray building surfaces such as window sills, frames, screens, eaves, garages, patios and garbage areas.

Dissolve 1.4 ounces of Orthene PCO Pellets to 9 gallons of water. Uniformly apply the finished solution over mounds and its immediate surroundings.

Where to Use Orthene PCO Pellets

Use Orthene PCO Pellets to treat infestations in Industrial, Institutional, and Commercial Buildings including Restaurants, Warehouses, Stores, Hospitals, Hotels, Manufacturing Plants and Ships.

Orthen Pco Product Label

Orthen Pco Material Safety Data Sheet

Orthene PCO Pellets Indoor Spray (For Use Only By Professional Applicators)

Orthene PCO Pellets -1 Box (10 packets)

Orthene PCO is a restricted-use insecticide for use only by professional pest control applicators. Used primarily for residual control of common household pests, Orthene Pellets are ideal complements to baits and other control products. Fast-acting, long lasting and economical, this product guarantees to control light and heavy infestations of even the most persistent pests.

Why Should You Use Orthene PCO Pellets?

Orthene PCO eliminates hard to control pests resistant to other insecticides. Orthene produces exceptional results when used together with compatible products.

Directions for Orthene PCO Pellets Use

Orthene PCO Pellets can be used for residual control of targeted pests by applying diluted solutions containing 0.75% or 1.0% of active ingredient. Use 0.75% active ingredient content for light infestations and 1.0% for heavy infestations.

Apply the product as a coarse spray, spot spray, crack and crevice spray to infested areas. Pay particular attention to cracks, crevices, voids, under sinks, under and behind refrigerators, appliances where pests are normally found. Maximum efficiency against cockroaches is reached around 3-7 days from applications.

Apply as a spot application using 0.5% to 0.10% dilutions to wasp nest entrances and surrounding areas. For best results, treat nests early or late in the day where wasps are less active:

Apply 0.5% to 0.10% Orthene PCO dilutions to a band of soil measuring 6 to 10 feet adjacent to structures. Treat foundations to a height of 2 to 3 feet and coat/spray building surfaces such as window sills, frames, screens, eaves, garages, patios and garbage areas.

Dissolve 1.4 ounces of Orthene PCO Pellets to 9 gallons of water. Uniformly apply the finished solution over mounds and its immediate surroundings.

Where to Use Orthene PCO Pellets

Use Orthene PCO Pellets to treat infestations in Industrial, Institutional, and Commercial Buildings including Restaurants, Warehouses, Stores, Hospitals, Hotels, Manufacturing Plants and Ships.

Bifen IT Product Label

Bifen IT Material Safety Data Sheet (MSDS)

BIFEN I/T - 1 Pint

Bifen I/T (Insecticide/Termiticide) is one of the most potent insecticides in the market. With 7.9% Bifenthrin, the product is highly effective in controlling a wide variety of pest insects, including various species of subterranean termites. Bifen I/T is specially formulated to control termite and insect infestations around commercial, residential and industrial structures.

Why Should You Use BIFEN I/T ?

Bifen I/T contains high concentrations of Bifenthrin to control and prevent termite and insect infestations. In addition, the product leaves a long-lasting residual effect that last for months.

Directions for BIFEN I/T Use

Applying Bifen I/T requires the use of suitable application equipment and personal protective equipment. The product is extremely toxic. Please refer to the product label before using or handling the product. Please read the product label for information on treatments, dilutions and application methods. Depending on the target pest and the method of application, Bifen I/T should be applied using the correct methods as stated in the product label. The product can be used for broadcast treatments, perimeter treatments, crack and crevice applications, sub-slab injections and residual barrier treatments. For subterranean termite control, methods may be employed such as trenching, rodding, crack and crevice injection or absorption for effective control.

Bifen I/T can also be used to control Armyworms, Cutworms, Sod Webworms, Annual Bluegrass Weevils, Billbugs, Black Turfgrass Ataenius, Leafhoppers, Mealybugs, Ants, Centipedes, Chinch Bugs, Fleas , Imported Fire Ants, Millipedes, Mole Crickets, Ticks, Pillbugs, Sowbugs and European Crane Flies. Please read the product label for directions and mixing instructions.

Where to Apply BIFEN I/T

Use Bifen I/T to treat infested areas in and around residential, commercial, public and industrial buildings. The product is for use in lawns, parks, recreational areas and athletic fields.

Bifen IT Product Label

Bifen IT Material Safety Data Sheet (MSDS)

BIFEN I/T - 1 Pint

Bifen I/T (Insecticide/Termiticide) is one of the most potent insecticides in the market. With 7.9% Bifenthrin, the product is highly effective in controlling a wide variety of pest insects, including various species of subterranean termites. Bifen I/T is specially formulated to control termite and insect infestations around commercial, residential and industrial structures.

Why Should You Use BIFEN I/T ?

Bifen I/T contains high concentrations of Bifenthrin to control and prevent termite and insect infestations. In addition, the product leaves a long-lasting residual effect that last for months.

Directions for BIFEN I/T Use

Applying Bifen I/T requires the use of suitable application equipment and personal protective equipment. The product is extremely toxic. Please refer to the product label before using or handling the product. Please read the product label for information on treatments, dilutions and application methods. Depending on the target pest and the method of application, Bifen I/T should be applied using the correct methods as stated in the product label. The product can be used for broadcast treatments, perimeter treatments, crack and crevice applications, sub-slab injections and residual barrier treatments. For subterranean termite control, methods may be employed such as trenching, rodding, crack and crevice injection or absorption for effective control.

Bifen I/T can also be used to control Armyworms, Cutworms, Sod Webworms, Annual Bluegrass Weevils, Billbugs, Black Turfgrass Ataenius, Leafhoppers, Mealybugs, Ants, Centipedes, Chinch Bugs, Fleas , Imported Fire Ants, Millipedes, Mole Crickets, Ticks, Pillbugs, Sowbugs and European Crane Flies. Please read the product label for directions and mixing instructions.

Where to Apply BIFEN I/T

Use Bifen I/T to treat infested areas in and around residential, commercial, public and industrial buildings. The product is for use in lawns, parks, recreational areas and athletic fields.

Bifen IT Product Label

Bifen IT Material Safety Data Sheet (MSDS)

BIFEN I/T - 1 Pint

Bifen I/T (Insecticide/Termiticide) is one of the most potent insecticides in the market. With 7.9% Bifenthrin, the product is highly effective in controlling a wide variety of pest insects, including various species of subterranean termites. Bifen I/T is specially formulated to control termite and insect infestations around commercial, residential and industrial structures.

Why Should You Use BIFEN I/T ?

Bifen I/T contains high concentrations of Bifenthrin to control and prevent termite and insect infestations. In addition, the product leaves a long-lasting residual effect that last for months.

Directions for BIFEN I/T Use

Applying Bifen I/T requires the use of suitable application equipment and personal protective equipment. The product is extremely toxic. Please refer to the product label before using or handling the product. Please read the product label for information on treatments, dilutions and application methods. Depending on the target pest and the method of application, Bifen I/T should be applied using the correct methods as stated in the product label. The product can be used for broadcast treatments, perimeter treatments, crack and crevice applications, sub-slab injections and residual barrier treatments. For subterranean termite control, methods may be employed such as trenching, rodding, crack and crevice injection or absorption for effective control.

Bifen I/T can also be used to control Armyworms, Cutworms, Sod Webworms, Annual Bluegrass Weevils, Billbugs, Black Turfgrass Ataenius, Leafhoppers, Mealybugs, Ants, Centipedes, Chinch Bugs, Fleas , Imported Fire Ants, Millipedes, Mole Crickets, Ticks, Pillbugs, Sowbugs and European Crane Flies. Please read the product label for directions and mixing instructions.

Where to Apply BIFEN I/T

Use Bifen I/T to treat infested areas in and around residential, commercial, public and industrial buildings. The product is for use in lawns, parks, recreational areas and athletic fields.

Bifen IT Product Label

Bifen IT Material Safety Data Sheet (MSDS)

BIFEN I/T - 1 Pint

Bifen I/T (Insecticide/Termiticide) is one of the most potent insecticides in the market. With 7.9% Bifenthrin, the product is highly effective in controlling a wide variety of pest insects, including various species of subterranean termites. Bifen I/T is specially formulated to control termite and insect infestations around commercial, residential and industrial structures.

Why Should You Use BIFEN I/T ?

Bifen I/T contains high concentrations of Bifenthrin to control and prevent termite and insect infestations. In addition, the product leaves a long-lasting residual effect that last for months.

Directions for BIFEN I/T Use

Applying Bifen I/T requires the use of suitable application equipment and personal protective equipment. The product is extremely toxic. Please refer to the product label before using or handling the product. Please read the product label for information on treatments, dilutions and application methods. Depending on the target pest and the method of application, Bifen I/T should be applied using the correct methods as stated in the product label. The product can be used for broadcast treatments, perimeter treatments, crack and crevice applications, sub-slab injections and residual barrier treatments. For subterranean termite control, methods may be employed such as trenching, rodding, crack and crevice injection or absorption for effective control.

Bifen I/T can also be used to control Armyworms, Cutworms, Sod Webworms, Annual Bluegrass Weevils, Billbugs, Black Turfgrass Ataenius, Leafhoppers, Mealybugs, Ants, Centipedes, Chinch Bugs, Fleas , Imported Fire Ants, Millipedes, Mole Crickets, Ticks, Pillbugs, Sowbugs and European Crane Flies. Please read the product label for directions and mixing instructions.

Where to Apply BIFEN I/T

Use Bifen I/T to treat infested areas in and around residential, commercial, public and industrial buildings. The product is for use in lawns, parks, recreational areas and athletic fields.

Bifen IT Product Label

Bifen IT Material Safety Data Sheet (MSDS)

BIFEN I/T - 1 Pint

Bifen I/T (Insecticide/Termiticide) is one of the most potent insecticides in the market. With 7.9% Bifenthrin, the product is highly effective in controlling a wide variety of pest insects, including various species of subterranean termites. Bifen I/T is specially formulated to control termite and insect infestations around commercial, residential and industrial structures.

Why Should You Use BIFEN I/T ?

Bifen I/T contains high concentrations of Bifenthrin to control and prevent termite and insect infestations. In addition, the product leaves a long-lasting residual effect that last for months.

Directions for BIFEN I/T Use

Applying Bifen I/T requires the use of suitable application equipment and personal protective equipment. The product is extremely toxic. Please refer to the product label before using or handling the product. Please read the product label for information on treatments, dilutions and application methods. Depending on the target pest and the method of application, Bifen I/T should be applied using the correct methods as stated in the product label. The product can be used for broadcast treatments, perimeter treatments, crack and crevice applications, sub-slab injections and residual barrier treatments. For subterranean termite control, methods may be employed such as trenching, rodding, crack and crevice injection or absorption for effective control.

Bifen I/T can also be used to control Armyworms, Cutworms, Sod Webworms, Annual Bluegrass Weevils, Billbugs, Black Turfgrass Ataenius, Leafhoppers, Mealybugs, Ants, Centipedes, Chinch Bugs, Fleas , Imported Fire Ants, Millipedes, Mole Crickets, Ticks, Pillbugs, Sowbugs and European Crane Flies. Please read the product label for directions and mixing instructions.

Where to Apply BIFEN I/T

Use Bifen I/T to treat infested areas in and around residential, commercial, public and industrial buildings. The product is for use in lawns, parks, recreational areas and athletic fields.

Bifen IT Product Label

Bifen IT Material Safety Data Sheet (MSDS)

BIFEN I/T - 1 Pint

Bifen I/T (Insecticide/Termiticide) is one of the most potent insecticides in the market. With 7.9% Bifenthrin, the product is highly effective in controlling a wide variety of pest insects, including various species of subterranean termites. Bifen I/T is specially formulated to control termite and insect infestations around commercial, residential and industrial structures.

Why Should You Use BIFEN I/T ?

Bifen I/T contains high concentrations of Bifenthrin to control and prevent termite and insect infestations. In addition, the product leaves a long-lasting residual effect that last for months.

Directions for BIFEN I/T Use

Applying Bifen I/T requires the use of suitable application equipment and personal protective equipment. The product is extremely toxic. Please refer to the product label before using or handling the product. Please read the product label for information on treatments, dilutions and application methods. Depending on the target pest and the method of application, Bifen I/T should be applied using the correct methods as stated in the product label. The product can be used for broadcast treatments, perimeter treatments, crack and crevice applications, sub-slab injections and residual barrier treatments. For subterranean termite control, methods may be employed such as trenching, rodding, crack and crevice injection or absorption for effective control.

Bifen I/T can also be used to control Armyworms, Cutworms, Sod Webworms, Annual Bluegrass Weevils, Billbugs, Black Turfgrass Ataenius, Leafhoppers, Mealybugs, Ants, Centipedes, Chinch Bugs, Fleas , Imported Fire Ants, Millipedes, Mole Crickets, Ticks, Pillbugs, Sowbugs and European Crane Flies. Please read the product label for directions and mixing instructions.

Where to Apply BIFEN I/T

Use Bifen I/T to treat infested areas in and around residential, commercial, public and industrial buildings. The product is for use in lawns, parks, recreational areas and athletic fields.

Bifen IT Product Label

Bifen IT Material Safety Data Sheet (MSDS)

BIFEN I/T - 1 Pint

Bifen I/T (Insecticide/Termiticide) is one of the most potent insecticides in the market. With 7.9% Bifenthrin, the product is highly effective in controlling a wide variety of pest insects, including various species of subterranean termites. Bifen I/T is specially formulated to control termite and insect infestations around commercial, residential and industrial structures.

Why Should You Use BIFEN I/T ?

Bifen I/T contains high concentrations of Bifenthrin to control and prevent termite and insect infestations. In addition, the product leaves a long-lasting residual effect that last for months.

Directions for BIFEN I/T Use

Applying Bifen I/T requires the use of suitable application equipment and personal protective equipment. The product is extremely toxic. Please refer to the product label before using or handling the product. Please read the product label for information on treatments, dilutions and application methods. Depending on the target pest and the method of application, Bifen I/T should be applied using the correct methods as stated in the product label. The product can be used for broadcast treatments, perimeter treatments, crack and crevice applications, sub-slab injections and residual barrier treatments. For subterranean termite control, methods may be employed such as trenching, rodding, crack and crevice injection or absorption for effective control.

Bifen I/T can also be used to control Armyworms, Cutworms, Sod Webworms, Annual Bluegrass Weevils, Billbugs, Black Turfgrass Ataenius, Leafhoppers, Mealybugs, Ants, Centipedes, Chinch Bugs, Fleas , Imported Fire Ants, Millipedes, Mole Crickets, Ticks, Pillbugs, Sowbugs and European Crane Flies. Please read the product label for directions and mixing instructions.

Where to Apply BIFEN I/T

Use Bifen I/T to treat infested areas in and around residential, commercial, public and industrial buildings. The product is for use in lawns, parks, recreational areas and athletic fields.

CB Borid Boric Acid Dust Product Label

CB Borid Boric Acid Dust Material Safety Data Sheet (MSDS)

How to Apply Dust Insecticides

CB Borid Boric Acid Dust

Proven Control of Crawling Insects in Commercial and Residential Locations

CB Borid Boric Acid Dust is a natural product that uses a contact kill and knock-down method like all other dusts. CB Borid Boric Acid Dust provides long-term treatment and remains effective as long as it remains dry and accessible to insects. Depending on the pest, CB Boric Borid Acid Dust will either kill the pest the minute they touch or it will allow the pest to carry the dust back to its colony, exposing the colony to the dust. CB Borid Boric Acid can be used either indoors or outdoors; simply apply small amounts using a tool or application tip. No dust should be visible, so make sure to brush the remaining dust into the cracks or crevices. When using CB Borid Boric Acid Dust, remember to be careful around children or pets.

Useful Tips You May Need to Know

The dust application is simple. However, when using dust, please be cautious, especially when children and pets are present. Use dust only in areas where they cannot reach. Apply lightly and uniformly to infested area. Do NOT overuse dust. The large amount of dust would repel insects. We recommend applying CB Borid Boric Acid Dust with a Bellow duster or a Centrobulb duster for best application.

For Use in and around: Homes, Restaurants, Grocery Stores, Schools, Warehouses, Mobile Homes, Hotels, Offices, Apartments, Attics, Nursing Homes, Ships, Yachts, Buses, Kennels, Zoos, New Building Construction, Sewers and Hospitals

Apply CB Borid Boric Acid Dust liberally in areas where cockroaches hide or nest:

- Under and behind appliances.
- In plumbing voids accessible through holes, around plumbing and drains.
- In void areas under kitchen and bathroom cabinets (Note: Many cabinets have a gap at the top of the kickplate which offers easy access. If not, drill a small hole at the top of the kickplate).
- In drawer wells of cabinets.
- In cracks around windows, doors, baseplates, fixtures and cabinets.
- In utility rooms, under and behind hot water heaters, washers and dryers. Be sure to dust plumbing voids.
- In attics, around the perimeter and vent pipes, above kitchens and baths.
- Around the perimeter of dropped ceilings.
- Into pits of elevator sharfs, dumbwaiters and trash chutes.
- Under and behind pallets and boxes in storerooms.

DIRECTIONS FOR USE OF CB BORID BORIC ACID

WITHIN FOOD AREAS AND NON-FOOD AREAS OF FOOD HANDLING ESTABLISHMENTS FOOD HANDLING ESTABLISHMENTS:

In places other than private residences in which exposed food is held, processed, prepared, or served, care should be taken to avoid depositing the product onto unwanted areas and items. Avoid contaminating food or food processing surfaces with CB Borid Boric Acid Dust.

APPLICATIONS OF CB BORID BORIC ACID IN THE FOOD AREA OF FOOD HANDLING ESTABLISHMENTS OTHER THAN AS A CRACK AND CREVICE TREATMENT ARE NOT PERMITTED.

Apply CB Borid Boric Acid Dust in small amounts directly into cracks and crevices using a bellows duster or other suitable equipment capable of applying insecticide directly. Includes areas for receiving, storage, acking (canning, bottling, wrapping, boxing), preparing, edible waste storage, and enclosed processing systems (mills, dairies, edible oils, syrups). Serving areas, when food is exposed and facility is in operation, also would be considered a food area.

SERVING AREAS:

Facilities where prepared foods are served, such as dining room, but excluding areas where food may be prepared or held. Apply CB Borid Boric Acid Dust as a spot treatment to selective surfaces such as baseboards or under elements of constructions into cracks and crevices. Avoid treating surfaces likely to be contacted by food. (Do not apply CB Borid Boric Acid Dust when facility is in operation or foods are exposed.)

NON-FOOD AREAS:

Includes garbage rooms, lavatories, floor drains (to sewer entries and vestibules), offices, locker rooms, machine rooms, boiler rooms, garages, mop closets, and storage (after canning or bottling). Apply to baseboard areas, around water pipes, surfaces behind and beneath sinks, lockers, tables, pallets, and similar areas where insects hide or through which they may enter.

SEWER TREATMENT:

Apply CB Borid Boric Acid Dust using portable blowers or air pressure tanks at a rate that does not exceed 8 pounds per 3,000 square feet.

PRETREATMENT OF NEW CONSTRUCTION (Preventive treatment for cockroaches and drywood termites):

Apply CB Borid Boric Acid Dust to baseplates and plumbing voids at the rate of 4 pounds per 1,000 square feet. In attics, apply powder around perimeter of attics and around vent stacks at the rate of 4 pounds per 1,000 square feet.

POULTRY HOUSES-TO CONTROL DARKLING BEETLES:

Remove birds before applying product. Apply CB Borid Boric Acid Dust at the rate of 1 to 2 pounds per 100 square feet over old litter or soil surface of the poultry house. Also apply to the posts, walls, framing, and insulation of the poultry house. Do not apply CB Borid Boric Acid Dust directly to manure. Evenly spread fresh litter a minimum of four inches over all treated floor surfaces before introducing birds. Reapply CB Borid Boric Acid Dust after each grow-out period or after each sanitizing and cleaning of the poultry containment area in order to have good beetle control.

CB Borid Boric Acid Dust Product Label

CB Borid Boric Acid Dust Material Safety Data Sheet (MSDS)

How to Apply Dust Insecticides

CB Borid Boric Acid Dust

Proven Control of Crawling Insects in Commercial and Residential Locations

CB Borid Boric Acid Dust is a natural product that uses a contact kill and knock-down method like all other dusts. CB Borid Boric Acid Dust provides long-term treatment and remains effective as long as it remains dry and accessible to insects. Depending on the pest, CB Boric Borid Acid Dust will either kill the pest the minute they touch or it will allow the pest to carry the dust back to its colony, exposing the colony to the dust. CB Borid Boric Acid can be used either indoors or outdoors; simply apply small amounts using a tool or application tip. No dust should be visible, so make sure to brush the remaining dust into the cracks or crevices. When using CB Borid Boric Acid Dust, remember to be careful around children or pets.

Useful Tips You May Need to Know

The dust application is simple. However, when using dust, please be cautious, especially when children and pets are present. Use dust only in areas where they cannot reach. Apply lightly and uniformly to infested area. Do NOT overuse dust. The large amount of dust would repel insects. We recommend applying CB Borid Boric Acid Dust with a Bellow duster or a Centrobulb duster for best application.

For Use in and around: Homes, Restaurants, Grocery Stores, Schools, Warehouses, Mobile Homes, Hotels, Offices, Apartments, Attics, Nursing Homes, Ships, Yachts, Buses, Kennels, Zoos, New Building Construction, Sewers and Hospitals

Apply CB Borid Boric Acid Dust liberally in areas where cockroaches hide or nest:

- Under and behind appliances.
- In plumbing voids accessible through holes, around plumbing and drains.
- In void areas under kitchen and bathroom cabinets (Note: Many cabinets have a gap at the top of the kickplate which offers easy access. If not, drill a small hole at the top of the kickplate).
- In drawer wells of cabinets.
- In cracks around windows, doors, baseplates, fixtures and cabinets.
- In utility rooms, under and behind hot water heaters, washers and dryers. Be sure to dust plumbing voids.
- In attics, around the perimeter and vent pipes, above kitchens and baths.
- Around the perimeter of dropped ceilings.
- Into pits of elevator sharfs, dumbwaiters and trash chutes.
- Under and behind pallets and boxes in storerooms.

DIRECTIONS FOR USE OF CB BORID BORIC ACID

WITHIN FOOD AREAS AND NON-FOOD AREAS OF FOOD HANDLING ESTABLISHMENTS FOOD HANDLING ESTABLISHMENTS:

In places other than private residences in which exposed food is held, processed, prepared, or served, care should be taken to avoid depositing the product onto unwanted areas and items. Avoid contaminating food or food processing surfaces with CB Borid Boric Acid Dust.

APPLICATIONS OF CB BORID BORIC ACID IN THE FOOD AREA OF FOOD HANDLING ESTABLISHMENTS OTHER THAN AS A CRACK AND CREVICE TREATMENT ARE NOT PERMITTED.

Apply CB Borid Boric Acid Dust in small amounts directly into cracks and crevices using a bellows duster or other suitable equipment capable of applying insecticide directly. Includes areas for receiving, storage, acking (canning, bottling, wrapping, boxing), preparing, edible waste storage, and enclosed processing systems (mills, dairies, edible oils, syrups). Serving areas, when food is exposed and facility is in operation, also would be considered a food area.

SERVING AREAS:

Facilities where prepared foods are served, such as dining room, but excluding areas where food may be prepared or held. Apply CB Borid Boric Acid Dust as a spot treatment to selective surfaces such as baseboards or under elements of constructions into cracks and crevices. Avoid treating surfaces likely to be contacted by food. (Do not apply CB Borid Boric Acid Dust when facility is in operation or foods are exposed.)

NON-FOOD AREAS:

Includes garbage rooms, lavatories, floor drains (to sewer entries and vestibules), offices, locker rooms, machine rooms, boiler rooms, garages, mop closets, and storage (after canning or bottling). Apply to baseboard areas, around water pipes, surfaces behind and beneath sinks, lockers, tables, pallets, and similar areas where insects hide or through which they may enter.

SEWER TREATMENT:

Apply CB Borid Boric Acid Dust using portable blowers or air pressure tanks at a rate that does not exceed 8 pounds per 3,000 square feet.

PRETREATMENT OF NEW CONSTRUCTION (Preventive treatment for cockroaches and drywood termites):

Apply CB Borid Boric Acid Dust to baseplates and plumbing voids at the rate of 4 pounds per 1,000 square feet. In attics, apply powder around perimeter of attics and around vent stacks at the rate of 4 pounds per 1,000 square feet.

POULTRY HOUSES-TO CONTROL DARKLING BEETLES:

Remove birds before applying product. Apply CB Borid Boric Acid Dust at the rate of 1 to 2 pounds per 100 square feet over old litter or soil surface of the poultry house. Also apply to the posts, walls, framing, and insulation of the poultry house. Do not apply CB Borid Boric Acid Dust directly to manure. Evenly spread fresh litter a minimum of four inches over all treated floor surfaces before introducing birds. Reapply CB Borid Boric Acid Dust after each grow-out period or after each sanitizing and cleaning of the poultry containment area in order to have good beetle control.

CB Borid Boric Acid Dust Product Label

CB Borid Boric Acid Dust Material Safety Data Sheet (MSDS)

How to Apply Dust Insecticides

CB Borid Boric Acid Dust

Proven Control of Crawling Insects in Commercial and Residential Locations

CB Borid Boric Acid Dust is a natural product that uses a contact kill and knock-down method like all other dusts. CB Borid Boric Acid Dust provides long-term treatment and remains effective as long as it remains dry and accessible to insects. Depending on the pest, CB Boric Borid Acid Dust will either kill the pest the minute they touch or it will allow the pest to carry the dust back to its colony, exposing the colony to the dust. CB Borid Boric Acid can be used either indoors or outdoors; simply apply small amounts using a tool or application tip. No dust should be visible, so make sure to brush the remaining dust into the cracks or crevices. When using CB Borid Boric Acid Dust, remember to be careful around children or pets.

Useful Tips You May Need to Know

The dust application is simple. However, when using dust, please be cautious, especially when children and pets are present. Use dust only in areas where they cannot reach. Apply lightly and uniformly to infested area. Do NOT overuse dust. The large amount of dust would repel insects. We recommend applying CB Borid Boric Acid Dust with a Bellow duster or a Centrobulb duster for best application.

For Use in and around: Homes, Restaurants, Grocery Stores, Schools, Warehouses, Mobile Homes, Hotels, Offices, Apartments, Attics, Nursing Homes, Ships, Yachts, Buses, Kennels, Zoos, New Building Construction, Sewers and Hospitals

Apply CB Borid Boric Acid Dust liberally in areas where cockroaches hide or nest:

- Under and behind appliances.
- In plumbing voids accessible through holes, around plumbing and drains.
- In void areas under kitchen and bathroom cabinets (Note: Many cabinets have a gap at the top of the kickplate which offers easy access. If not, drill a small hole at the top of the kickplate).
- In drawer wells of cabinets.
- In cracks around windows, doors, baseplates, fixtures and cabinets.
- In utility rooms, under and behind hot water heaters, washers and dryers. Be sure to dust plumbing voids.
- In attics, around the perimeter and vent pipes, above kitchens and baths.
- Around the perimeter of dropped ceilings.
- Into pits of elevator sharfs, dumbwaiters and trash chutes.
- Under and behind pallets and boxes in storerooms.

DIRECTIONS FOR USE OF CB BORID BORIC ACID

WITHIN FOOD AREAS AND NON-FOOD AREAS OF FOOD HANDLING ESTABLISHMENTS FOOD HANDLING ESTABLISHMENTS:

In places other than private residences in which exposed food is held, processed, prepared, or served, care should be taken to avoid depositing the product onto unwanted areas and items. Avoid contaminating food or food processing surfaces with CB Borid Boric Acid Dust.

APPLICATIONS OF CB BORID BORIC ACID IN THE FOOD AREA OF FOOD HANDLING ESTABLISHMENTS OTHER THAN AS A CRACK AND CREVICE TREATMENT ARE NOT PERMITTED.

Apply CB Borid Boric Acid Dust in small amounts directly into cracks and crevices using a bellows duster or other suitable equipment capable of applying insecticide directly. Includes areas for receiving, storage, acking (canning, bottling, wrapping, boxing), preparing, edible waste storage, and enclosed processing systems (mills, dairies, edible oils, syrups). Serving areas, when food is exposed and facility is in operation, also would be considered a food area.

SERVING AREAS:

Facilities where prepared foods are served, such as dining room, but excluding areas where food may be prepared or held. Apply CB Borid Boric Acid Dust as a spot treatment to selective surfaces such as baseboards or under elements of constructions into cracks and crevices. Avoid treating surfaces likely to be contacted by food. (Do not apply CB Borid Boric Acid Dust when facility is in operation or foods are exposed.)

NON-FOOD AREAS:

Includes garbage rooms, lavatories, floor drains (to sewer entries and vestibules), offices, locker rooms, machine rooms, boiler rooms, garages, mop closets, and storage (after canning or bottling). Apply to baseboard areas, around water pipes, surfaces behind and beneath sinks, lockers, tables, pallets, and similar areas where insects hide or through which they may enter.

SEWER TREATMENT:

Apply CB Borid Boric Acid Dust using portable blowers or air pressure tanks at a rate that does not exceed 8 pounds per 3,000 square feet.

PRETREATMENT OF NEW CONSTRUCTION (Preventive treatment for cockroaches and drywood termites):

Apply CB Borid Boric Acid Dust to baseplates and plumbing voids at the rate of 4 pounds per 1,000 square feet. In attics, apply powder around perimeter of attics and around vent stacks at the rate of 4 pounds per 1,000 square feet.

POULTRY HOUSES-TO CONTROL DARKLING BEETLES:

Remove birds before applying product. Apply CB Borid Boric Acid Dust at the rate of 1 to 2 pounds per 100 square feet over old litter or soil surface of the poultry house. Also apply to the posts, walls, framing, and insulation of the poultry house. Do not apply CB Borid Boric Acid Dust directly to manure. Evenly spread fresh litter a minimum of four inches over all treated floor surfaces before introducing birds. Reapply CB Borid Boric Acid Dust after each grow-out period or after each sanitizing and cleaning of the poultry containment area in order to have good beetle control.

CB Borid Boric Acid Dust Product Label

CB Borid Boric Acid Dust Material Safety Data Sheet (MSDS)

How to Apply Dust Insecticides

CB Borid Boric Acid Dust

Proven Control of Crawling Insects in Commercial and Residential Locations

CB Borid Boric Acid Dust is a natural product that uses a contact kill and knock-down method like all other dusts. CB Borid Boric Acid Dust provides long-term treatment and remains effective as long as it remains dry and accessible to insects. Depending on the pest, CB Boric Borid Acid Dust will either kill the pest the minute they touch or it will allow the pest to carry the dust back to its colony, exposing the colony to the dust. CB Borid Boric Acid can be used either indoors or outdoors; simply apply small amounts using a tool or application tip. No dust should be visible, so make sure to brush the remaining dust into the cracks or crevices. When using CB Borid Boric Acid Dust, remember to be careful around children or pets.

Useful Tips You May Need to Know

The dust application is simple. However, when using dust, please be cautious, especially when children and pets are present. Use dust only in areas where they cannot reach. Apply lightly and uniformly to infested area. Do NOT overuse dust. The large amount of dust would repel insects. We recommend applying CB Borid Boric Acid Dust with a Bellow duster or a Centrobulb duster for best application.

For Use in and around: Homes, Restaurants, Grocery Stores, Schools, Warehouses, Mobile Homes, Hotels, Offices, Apartments, Attics, Nursing Homes, Ships, Yachts, Buses, Kennels, Zoos, New Building Construction, Sewers and Hospitals

Apply CB Borid Boric Acid Dust liberally in areas where cockroaches hide or nest:

- Under and behind appliances.
- In plumbing voids accessible through holes, around plumbing and drains.
- In void areas under kitchen and bathroom cabinets (Note: Many cabinets have a gap at the top of the kickplate which offers easy access. If not, drill a small hole at the top of the kickplate).
- In drawer wells of cabinets.
- In cracks around windows, doors, baseplates, fixtures and cabinets.
- In utility rooms, under and behind hot water heaters, washers and dryers. Be sure to dust plumbing voids.
- In attics, around the perimeter and vent pipes, above kitchens and baths.
- Around the perimeter of dropped ceilings.
- Into pits of elevator sharfs, dumbwaiters and trash chutes.
- Under and behind pallets and boxes in storerooms.

DIRECTIONS FOR USE OF CB BORID BORIC ACID

WITHIN FOOD AREAS AND NON-FOOD AREAS OF FOOD HANDLING ESTABLISHMENTS FOOD HANDLING ESTABLISHMENTS:

In places other than private residences in which exposed food is held, processed, prepared, or served, care should be taken to avoid depositing the product onto unwanted areas and items. Avoid contaminating food or food processing surfaces with CB Borid Boric Acid Dust.

APPLICATIONS OF CB BORID BORIC ACID IN THE FOOD AREA OF FOOD HANDLING ESTABLISHMENTS OTHER THAN AS A CRACK AND CREVICE TREATMENT ARE NOT PERMITTED.

Apply CB Borid Boric Acid Dust in small amounts directly into cracks and crevices using a bellows duster or other suitable equipment capable of applying insecticide directly. Includes areas for receiving, storage, acking (canning, bottling, wrapping, boxing), preparing, edible waste storage, and enclosed processing systems (mills, dairies, edible oils, syrups). Serving areas, when food is exposed and facility is in operation, also would be considered a food area.

SERVING AREAS:

Facilities where prepared foods are served, such as dining room, but excluding areas where food may be prepared or held. Apply CB Borid Boric Acid Dust as a spot treatment to selective surfaces such as baseboards or under elements of constructions into cracks and crevices. Avoid treating surfaces likely to be contacted by food. (Do not apply CB Borid Boric Acid Dust when facility is in operation or foods are exposed.)

NON-FOOD AREAS:

Includes garbage rooms, lavatories, floor drains (to sewer entries and vestibules), offices, locker rooms, machine rooms, boiler rooms, garages, mop closets, and storage (after canning or bottling). Apply to baseboard areas, around water pipes, surfaces behind and beneath sinks, lockers, tables, pallets, and similar areas where insects hide or through which they may enter.

SEWER TREATMENT:

Apply CB Borid Boric Acid Dust using portable blowers or air pressure tanks at a rate that does not exceed 8 pounds per 3,000 square feet.

PRETREATMENT OF NEW CONSTRUCTION (Preventive treatment for cockroaches and drywood termites):

Apply CB Borid Boric Acid Dust to baseplates and plumbing voids at the rate of 4 pounds per 1,000 square feet. In attics, apply powder around perimeter of attics and around vent stacks at the rate of 4 pounds per 1,000 square feet.

POULTRY HOUSES-TO CONTROL DARKLING BEETLES:

Remove birds before applying product. Apply CB Borid Boric Acid Dust at the rate of 1 to 2 pounds per 100 square feet over old litter or soil surface of the poultry house. Also apply to the posts, walls, framing, and insulation of the poultry house. Do not apply CB Borid Boric Acid Dust directly to manure. Evenly spread fresh litter a minimum of four inches over all treated floor surfaces before introducing birds. Reapply CB Borid Boric Acid Dust after each grow-out period or after each sanitizing and cleaning of the poultry containment area in order to have good beetle control.

CB Borid Boric Acid Dust Product Label

CB Borid Boric Acid Dust Material Safety Data Sheet (MSDS)

How to Apply Dust Insecticides

CB Borid Boric Acid Dust

Proven Control of Crawling Insects in Commercial and Residential Locations

CB Borid Boric Acid Dust is a natural product that uses a contact kill and knock-down method like all other dusts. CB Borid Boric Acid Dust provides long-term treatment and remains effective as long as it remains dry and accessible to insects. Depending on the pest, CB Boric Borid Acid Dust will either kill the pest the minute they touch or it will allow the pest to carry the dust back to its colony, exposing the colony to the dust. CB Borid Boric Acid can be used either indoors or outdoors; simply apply small amounts using a tool or application tip. No dust should be visible, so make sure to brush the remaining dust into the cracks or crevices. When using CB Borid Boric Acid Dust, remember to be careful around children or pets.

Useful Tips You May Need to Know

The dust application is simple. However, when using dust, please be cautious, especially when children and pets are present. Use dust only in areas where they cannot reach. Apply lightly and uniformly to infested area. Do NOT overuse dust. The large amount of dust would repel insects. We recommend applying CB Borid Boric Acid Dust with a Bellow duster or a Centrobulb duster for best application.

For Use in and around: Homes, Restaurants, Grocery Stores, Schools, Warehouses, Mobile Homes, Hotels, Offices, Apartments, Attics, Nursing Homes, Ships, Yachts, Buses, Kennels, Zoos, New Building Construction, Sewers and Hospitals

Apply CB Borid Boric Acid Dust liberally in areas where cockroaches hide or nest:

- Under and behind appliances.
- In plumbing voids accessible through holes, around plumbing and drains.
- In void areas under kitchen and bathroom cabinets (Note: Many cabinets have a gap at the top of the kickplate which offers easy access. If not, drill a small hole at the top of the kickplate).
- In drawer wells of cabinets.
- In cracks around windows, doors, baseplates, fixtures and cabinets.
- In utility rooms, under and behind hot water heaters, washers and dryers. Be sure to dust plumbing voids.
- In attics, around the perimeter and vent pipes, above kitchens and baths.
- Around the perimeter of dropped ceilings.
- Into pits of elevator sharfs, dumbwaiters and trash chutes.
- Under and behind pallets and boxes in storerooms.

DIRECTIONS FOR USE OF CB BORID BORIC ACID

WITHIN FOOD AREAS AND NON-FOOD AREAS OF FOOD HANDLING ESTABLISHMENTS FOOD HANDLING ESTABLISHMENTS:

In places other than private residences in which exposed food is held, processed, prepared, or served, care should be taken to avoid depositing the product onto unwanted areas and items. Avoid contaminating food or food processing surfaces with CB Borid Boric Acid Dust.

APPLICATIONS OF CB BORID BORIC ACID IN THE FOOD AREA OF FOOD HANDLING ESTABLISHMENTS OTHER THAN AS A CRACK AND CREVICE TREATMENT ARE NOT PERMITTED.

Apply CB Borid Boric Acid Dust in small amounts directly into cracks and crevices using a bellows duster or other suitable equipment capable of applying insecticide directly. Includes areas for receiving, storage, acking (canning, bottling, wrapping, boxing), preparing, edible waste storage, and enclosed processing systems (mills, dairies, edible oils, syrups). Serving areas, when food is exposed and facility is in operation, also would be considered a food area.

SERVING AREAS:

Facilities where prepared foods are served, such as dining room, but excluding areas where food may be prepared or held. Apply CB Borid Boric Acid Dust as a spot treatment to selective surfaces such as baseboards or under elements of constructions into cracks and crevices. Avoid treating surfaces likely to be contacted by food. (Do not apply CB Borid Boric Acid Dust when facility is in operation or foods are exposed.)

NON-FOOD AREAS:

Includes garbage rooms, lavatories, floor drains (to sewer entries and vestibules), offices, locker rooms, machine rooms, boiler rooms, garages, mop closets, and storage (after canning or bottling). Apply to baseboard areas, around water pipes, surfaces behind and beneath sinks, lockers, tables, pallets, and similar areas where insects hide or through which they may enter.

SEWER TREATMENT:

Apply CB Borid Boric Acid Dust using portable blowers or air pressure tanks at a rate that does not exceed 8 pounds per 3,000 square feet.

PRETREATMENT OF NEW CONSTRUCTION (Preventive treatment for cockroaches and drywood termites):

Apply CB Borid Boric Acid Dust to baseplates and plumbing voids at the rate of 4 pounds per 1,000 square feet. In attics, apply powder around perimeter of attics and around vent stacks at the rate of 4 pounds per 1,000 square feet.

POULTRY HOUSES-TO CONTROL DARKLING BEETLES:

Remove birds before applying product. Apply CB Borid Boric Acid Dust at the rate of 1 to 2 pounds per 100 square feet over old litter or soil surface of the poultry house. Also apply to the posts, walls, framing, and insulation of the poultry house. Do not apply CB Borid Boric Acid Dust directly to manure. Evenly spread fresh litter a minimum of four inches over all treated floor surfaces before introducing birds. Reapply CB Borid Boric Acid Dust after each grow-out period or after each sanitizing and cleaning of the poultry containment area in order to have good beetle control.

CB Borid Boric Acid Dust Product Label

CB Borid Boric Acid Dust Material Safety Data Sheet (MSDS)

How to Apply Dust Insecticides

CB Borid Boric Acid Dust

Proven Control of Crawling Insects in Commercial and Residential Locations

CB Borid Boric Acid Dust is a natural product that uses a contact kill and knock-down method like all other dusts. CB Borid Boric Acid Dust provides long-term treatment and remains effective as long as it remains dry and accessible to insects. Depending on the pest, CB Boric Borid Acid Dust will either kill the pest the minute they touch or it will allow the pest to carry the dust back to its colony, exposing the colony to the dust. CB Borid Boric Acid can be used either indoors or outdoors; simply apply small amounts using a tool or application tip. No dust should be visible, so make sure to brush the remaining dust into the cracks or crevices. When using CB Borid Boric Acid Dust, remember to be careful around children or pets.

Useful Tips You May Need to Know

The dust application is simple. However, when using dust, please be cautious, especially when children and pets are present. Use dust only in areas where they cannot reach. Apply lightly and uniformly to infested area. Do NOT overuse dust. The large amount of dust would repel insects. We recommend applying CB Borid Boric Acid Dust with a Bellow duster or a Centrobulb duster for best application.

For Use in and around: Homes, Restaurants, Grocery Stores, Schools, Warehouses, Mobile Homes, Hotels, Offices, Apartments, Attics, Nursing Homes, Ships, Yachts, Buses, Kennels, Zoos, New Building Construction, Sewers and Hospitals

Apply CB Borid Boric Acid Dust liberally in areas where cockroaches hide or nest:

- Under and behind appliances.
- In plumbing voids accessible through holes, around plumbing and drains.
- In void areas under kitchen and bathroom cabinets (Note: Many cabinets have a gap at the top of the kickplate which offers easy access. If not, drill a small hole at the top of the kickplate).
- In drawer wells of cabinets.
- In cracks around windows, doors, baseplates, fixtures and cabinets.
- In utility rooms, under and behind hot water heaters, washers and dryers. Be sure to dust plumbing voids.
- In attics, around the perimeter and vent pipes, above kitchens and baths.
- Around the perimeter of dropped ceilings.
- Into pits of elevator sharfs, dumbwaiters and trash chutes.
- Under and behind pallets and boxes in storerooms.

DIRECTIONS FOR USE OF CB BORID BORIC ACID

WITHIN FOOD AREAS AND NON-FOOD AREAS OF FOOD HANDLING ESTABLISHMENTS FOOD HANDLING ESTABLISHMENTS:

In places other than private residences in which exposed food is held, processed, prepared, or served, care should be taken to avoid depositing the product onto unwanted areas and items. Avoid contaminating food or food processing surfaces with CB Borid Boric Acid Dust.

APPLICATIONS OF CB BORID BORIC ACID IN THE FOOD AREA OF FOOD HANDLING ESTABLISHMENTS OTHER THAN AS A CRACK AND CREVICE TREATMENT ARE NOT PERMITTED.

Apply CB Borid Boric Acid Dust in small amounts directly into cracks and crevices using a bellows duster or other suitable equipment capable of applying insecticide directly. Includes areas for receiving, storage, acking (canning, bottling, wrapping, boxing), preparing, edible waste storage, and enclosed processing systems (mills, dairies, edible oils, syrups). Serving areas, when food is exposed and facility is in operation, also would be considered a food area.

SERVING AREAS:

Facilities where prepared foods are served, such as dining room, but excluding areas where food may be prepared or held. Apply CB Borid Boric Acid Dust as a spot treatment to selective surfaces such as baseboards or under elements of constructions into cracks and crevices. Avoid treating surfaces likely to be contacted by food. (Do not apply CB Borid Boric Acid Dust when facility is in operation or foods are exposed.)

NON-FOOD AREAS:

Includes garbage rooms, lavatories, floor drains (to sewer entries and vestibules), offices, locker rooms, machine rooms, boiler rooms, garages, mop closets, and storage (after canning or bottling). Apply to baseboard areas, around water pipes, surfaces behind and beneath sinks, lockers, tables, pallets, and similar areas where insects hide or through which they may enter.

SEWER TREATMENT:

Apply CB Borid Boric Acid Dust using portable blowers or air pressure tanks at a rate that does not exceed 8 pounds per 3,000 square feet.

PRETREATMENT OF NEW CONSTRUCTION (Preventive treatment for cockroaches and drywood termites):

Apply CB Borid Boric Acid Dust to baseplates and plumbing voids at the rate of 4 pounds per 1,000 square feet. In attics, apply powder around perimeter of attics and around vent stacks at the rate of 4 pounds per 1,000 square feet.

POULTRY HOUSES-TO CONTROL DARKLING BEETLES:

Remove birds before applying product. Apply CB Borid Boric Acid Dust at the rate of 1 to 2 pounds per 100 square feet over old litter or soil surface of the poultry house. Also apply to the posts, walls, framing, and insulation of the poultry house. Do not apply CB Borid Boric Acid Dust directly to manure. Evenly spread fresh litter a minimum of four inches over all treated floor surfaces before introducing birds. Reapply CB Borid Boric Acid Dust after each grow-out period or after each sanitizing and cleaning of the poultry containment area in order to have good beetle control.

CB Borid Boric Acid Dust Product Label

CB Borid Boric Acid Dust Material Safety Data Sheet (MSDS)

How to Apply Dust Insecticides

CB Borid Boric Acid Dust

Proven Control of Crawling Insects in Commercial and Residential Locations

CB Borid Boric Acid Dust is a natural product that uses a contact kill and knock-down method like all other dusts. CB Borid Boric Acid Dust provides long-term treatment and remains effective as long as it remains dry and accessible to insects. Depending on the pest, CB Boric Borid Acid Dust will either kill the pest the minute they touch or it will allow the pest to carry the dust back to its colony, exposing the colony to the dust. CB Borid Boric Acid can be used either indoors or outdoors; simply apply small amounts using a tool or application tip. No dust should be visible, so make sure to brush the remaining dust into the cracks or crevices. When using CB Borid Boric Acid Dust, remember to be careful around children or pets.

Useful Tips You May Need to Know

The dust application is simple. However, when using dust, please be cautious, especially when children and pets are present. Use dust only in areas where they cannot reach. Apply lightly and uniformly to infested area. Do NOT overuse dust. The large amount of dust would repel insects. We recommend applying CB Borid Boric Acid Dust with a Bellow duster or a Centrobulb duster for best application.

For Use in and around: Homes, Restaurants, Grocery Stores, Schools, Warehouses, Mobile Homes, Hotels, Offices, Apartments, Attics, Nursing Homes, Ships, Yachts, Buses, Kennels, Zoos, New Building Construction, Sewers and Hospitals

Apply CB Borid Boric Acid Dust liberally in areas where cockroaches hide or nest:

- Under and behind appliances.
- In plumbing voids accessible through holes, around plumbing and drains.
- In void areas under kitchen and bathroom cabinets (Note: Many cabinets have a gap at the top of the kickplate which offers easy access. If not, drill a small hole at the top of the kickplate).
- In drawer wells of cabinets.
- In cracks around windows, doors, baseplates, fixtures and cabinets.
- In utility rooms, under and behind hot water heaters, washers and dryers. Be sure to dust plumbing voids.
- In attics, around the perimeter and vent pipes, above kitchens and baths.
- Around the perimeter of dropped ceilings.
- Into pits of elevator sharfs, dumbwaiters and trash chutes.
- Under and behind pallets and boxes in storerooms.

DIRECTIONS FOR USE OF CB BORID BORIC ACID

WITHIN FOOD AREAS AND NON-FOOD AREAS OF FOOD HANDLING ESTABLISHMENTS FOOD HANDLING ESTABLISHMENTS:

In places other than private residences in which exposed food is held, processed, prepared, or served, care should be taken to avoid depositing the product onto unwanted areas and items. Avoid contaminating food or food processing surfaces with CB Borid Boric Acid Dust.

APPLICATIONS OF CB BORID BORIC ACID IN THE FOOD AREA OF FOOD HANDLING ESTABLISHMENTS OTHER THAN AS A CRACK AND CREVICE TREATMENT ARE NOT PERMITTED.

Apply CB Borid Boric Acid Dust in small amounts directly into cracks and crevices using a bellows duster or other suitable equipment capable of applying insecticide directly. Includes areas for receiving, storage, acking (canning, bottling, wrapping, boxing), preparing, edible waste storage, and enclosed processing systems (mills, dairies, edible oils, syrups). Serving areas, when food is exposed and facility is in operation, also would be considered a food area.

SERVING AREAS:

Facilities where prepared foods are served, such as dining room, but excluding areas where food may be prepared or held. Apply CB Borid Boric Acid Dust as a spot treatment to selective surfaces such as baseboards or under elements of constructions into cracks and crevices. Avoid treating surfaces likely to be contacted by food. (Do not apply CB Borid Boric Acid Dust when facility is in operation or foods are exposed.)

NON-FOOD AREAS:

Includes garbage rooms, lavatories, floor drains (to sewer entries and vestibules), offices, locker rooms, machine rooms, boiler rooms, garages, mop closets, and storage (after canning or bottling). Apply to baseboard areas, around water pipes, surfaces behind and beneath sinks, lockers, tables, pallets, and similar areas where insects hide or through which they may enter.

SEWER TREATMENT:

Apply CB Borid Boric Acid Dust using portable blowers or air pressure tanks at a rate that does not exceed 8 pounds per 3,000 square feet.

PRETREATMENT OF NEW CONSTRUCTION (Preventive treatment for cockroaches and drywood termites):

Apply CB Borid Boric Acid Dust to baseplates and plumbing voids at the rate of 4 pounds per 1,000 square feet. In attics, apply powder around perimeter of attics and around vent stacks at the rate of 4 pounds per 1,000 square feet.

POULTRY HOUSES-TO CONTROL DARKLING BEETLES:

Remove birds before applying product. Apply CB Borid Boric Acid Dust at the rate of 1 to 2 pounds per 100 square feet over old litter or soil surface of the poultry house. Also apply to the posts, walls, framing, and insulation of the poultry house. Do not apply CB Borid Boric Acid Dust directly to manure. Evenly spread fresh litter a minimum of four inches over all treated floor surfaces before introducing birds. Reapply CB Borid Boric Acid Dust after each grow-out period or after each sanitizing and cleaning of the poultry containment area in order to have good beetle control.

CB Borid Boric Acid Dust Product Label

CB Borid Boric Acid Dust Material Safety Data Sheet (MSDS)

How to Apply Dust Insecticides

CB Borid Boric Acid Dust

Proven Control of Crawling Insects in Commercial and Residential Locations

CB Borid Boric Acid Dust is a natural product that uses a contact kill and knock-down method like all other dusts. CB Borid Boric Acid Dust provides long-term treatment and remains effective as long as it remains dry and accessible to insects. Depending on the pest, CB Boric Borid Acid Dust will either kill the pest the minute they touch or it will allow the pest to carry the dust back to its colony, exposing the colony to the dust. CB Borid Boric Acid can be used either indoors or outdoors; simply apply small amounts using a tool or application tip. No dust should be visible, so make sure to brush the remaining dust into the cracks or crevices. When using CB Borid Boric Acid Dust, remember to be careful around children or pets.

Useful Tips You May Need to Know

The dust application is simple. However, when using dust, please be cautious, especially when children and pets are present. Use dust only in areas where they cannot reach. Apply lightly and uniformly to infested area. Do NOT overuse dust. The large amount of dust would repel insects. We recommend applying CB Borid Boric Acid Dust with a Bellow duster or a Centrobulb duster for best application.

For Use in and around: Homes, Restaurants, Grocery Stores, Schools, Warehouses, Mobile Homes, Hotels, Offices, Apartments, Attics, Nursing Homes, Ships, Yachts, Buses, Kennels, Zoos, New Building Construction, Sewers and Hospitals

Apply CB Borid Boric Acid Dust liberally in areas where cockroaches hide or nest:

- Under and behind appliances.
- In plumbing voids accessible through holes, around plumbing and drains.
- In void areas under kitchen and bathroom cabinets (Note: Many cabinets have a gap at the top of the kickplate which offers easy access. If not, drill a small hole at the top of the kickplate).
- In drawer wells of cabinets.
- In cracks around windows, doors, baseplates, fixtures and cabinets.
- In utility rooms, under and behind hot water heaters, washers and dryers. Be sure to dust plumbing voids.
- In attics, around the perimeter and vent pipes, above kitchens and baths.
- Around the perimeter of dropped ceilings.
- Into pits of elevator sharfs, dumbwaiters and trash chutes.
- Under and behind pallets and boxes in storerooms.

DIRECTIONS FOR USE OF CB BORID BORIC ACID

WITHIN FOOD AREAS AND NON-FOOD AREAS OF FOOD HANDLING ESTABLISHMENTS FOOD HANDLING ESTABLISHMENTS:

In places other than private residences in which exposed food is held, processed, prepared, or served, care should be taken to avoid depositing the product onto unwanted areas and items. Avoid contaminating food or food processing surfaces with CB Borid Boric Acid Dust.

APPLICATIONS OF CB BORID BORIC ACID IN THE FOOD AREA OF FOOD HANDLING ESTABLISHMENTS OTHER THAN AS A CRACK AND CREVICE TREATMENT ARE NOT PERMITTED.

Apply CB Borid Boric Acid Dust in small amounts directly into cracks and crevices using a bellows duster or other suitable equipment capable of applying insecticide directly. Includes areas for receiving, storage, acking (canning, bottling, wrapping, boxing), preparing, edible waste storage, and enclosed processing systems (mills, dairies, edible oils, syrups). Serving areas, when food is exposed and facility is in operation, also would be considered a food area.

SERVING AREAS:

Facilities where prepared foods are served, such as dining room, but excluding areas where food may be prepared or held. Apply CB Borid Boric Acid Dust as a spot treatment to selective surfaces such as baseboards or under elements of constructions into cracks and crevices. Avoid treating surfaces likely to be contacted by food. (Do not apply CB Borid Boric Acid Dust when facility is in operation or foods are exposed.)

NON-FOOD AREAS:

Includes garbage rooms, lavatories, floor drains (to sewer entries and vestibules), offices, locker rooms, machine rooms, boiler rooms, garages, mop closets, and storage (after canning or bottling). Apply to baseboard areas, around water pipes, surfaces behind and beneath sinks, lockers, tables, pallets, and similar areas where insects hide or through which they may enter.

SEWER TREATMENT:

Apply CB Borid Boric Acid Dust using portable blowers or air pressure tanks at a rate that does not exceed 8 pounds per 3,000 square feet.

PRETREATMENT OF NEW CONSTRUCTION (Preventive treatment for cockroaches and drywood termites):

Apply CB Borid Boric Acid Dust to baseplates and plumbing voids at the rate of 4 pounds per 1,000 square feet. In attics, apply powder around perimeter of attics and around vent stacks at the rate of 4 pounds per 1,000 square feet.

POULTRY HOUSES-TO CONTROL DARKLING BEETLES:

Remove birds before applying product. Apply CB Borid Boric Acid Dust at the rate of 1 to 2 pounds per 100 square feet over old litter or soil surface of the poultry house. Also apply to the posts, walls, framing, and insulation of the poultry house. Do not apply CB Borid Boric Acid Dust directly to manure. Evenly spread fresh litter a minimum of four inches over all treated floor surfaces before introducing birds. Reapply CB Borid Boric Acid Dust after each grow-out period or after each sanitizing and cleaning of the poultry containment area in order to have good beetle control.

Catalyst Product Label

Catalyst Material Safety Data Sheet (MSDS)

Catalyst Insecticide - Pint

Catalyst Insecticide is a water-based insecticide containing 18.9% Propetamphos. Recommended for tough infestations, Catalyst provides residual control of several pest insects. The product contains a water-soluble plastic that creates a non-staining and long lasting residue for extended control. Catalyst is a non-repellent contact insecticide that provides a quick knockdown to target pests, making it an ideal product to complement baits.

Why Should You Use Catalyst Insecticide?

Catalyst Insecticide is a powerful contact insecticide that provides quick knockdown and residual control of target pests.

Directions for Catalyst Insecticide Use

Catalyst Insecticide is limited to crack and crevice treatments only. Please refer to the product label for information on the limits of its use. Crack and crevice treatments require solutions that contain 0.5% active ingredient content. Mix 3.2 ounces of Catalyst Insecticide in one gallon of water to produce a diluted solution. Using appropriate spray equipment, apply the solution to cracks, crevices, voids, entry points and other sites providing harborage to insects.

Do NOT use the diluted solution as a space spray.

Where to Apply Catalyst Insecticide

Catalyst Insecticide is for indoor use only. The use of this product is limited to food and non-food handling areas of food service establishments, office buildings, commercial buildings, industrial buildings, warehouses. The product is not for use in residential areas occupied by children and the elderly.

Catalyst Product Label

Catalyst Material Safety Data Sheet (MSDS)

Catalyst Insecticide - Pint

Catalyst Insecticide is a water-based insecticide containing 18.9% Propetamphos. Recommended for tough infestations, Catalyst provides residual control of several pest insects. The product contains a water-soluble plastic that creates a non-staining and long lasting residue for extended control. Catalyst is a non-repellent contact insecticide that provides a quick knockdown to target pests, making it an ideal product to complement baits.

Why Should You Use Catalyst Insecticide?

Catalyst Insecticide is a powerful contact insecticide that provides quick knockdown and residual control of target pests.

Directions for Catalyst Insecticide Use

Catalyst Insecticide is limited to crack and crevice treatments only. Please refer to the product label for information on the limits of its use. Crack and crevice treatments require solutions that contain 0.5% active ingredient content. Mix 3.2 ounces of Catalyst Insecticide in one gallon of water to produce a diluted solution. Using appropriate spray equipment, apply the solution to cracks, crevices, voids, entry points and other sites providing harborage to insects.

Do NOT use the diluted solution as a space spray.

Where to Apply Catalyst Insecticide

Catalyst Insecticide is for indoor use only. The use of this product is limited to food and non-food handling areas of food service establishments, office buildings, commercial buildings, industrial buildings, warehouses. The product is not for use in residential areas occupied by children and the elderly.

Catalyst Product Label

Catalyst Material Safety Data Sheet (MSDS)

Catalyst Insecticide - Pint

Catalyst Insecticide is a water-based insecticide containing 18.9% Propetamphos. Recommended for tough infestations, Catalyst provides residual control of several pest insects. The product contains a water-soluble plastic that creates a non-staining and long lasting residue for extended control. Catalyst is a non-repellent contact insecticide that provides a quick knockdown to target pests, making it an ideal product to complement baits.

Why Should You Use Catalyst Insecticide?

Catalyst Insecticide is a powerful contact insecticide that provides quick knockdown and residual control of target pests.

Directions for Catalyst Insecticide Use

Catalyst Insecticide is limited to crack and crevice treatments only. Please refer to the product label for information on the limits of its use. Crack and crevice treatments require solutions that contain 0.5% active ingredient content. Mix 3.2 ounces of Catalyst Insecticide in one gallon of water to produce a diluted solution. Using appropriate spray equipment, apply the solution to cracks, crevices, voids, entry points and other sites providing harborage to insects.

Do NOT use the diluted solution as a space spray.

Where to Apply Catalyst Insecticide

Catalyst Insecticide is for indoor use only. The use of this product is limited to food and non-food handling areas of food service establishments, office buildings, commercial buildings, industrial buildings, warehouses. The product is not for use in residential areas occupied by children and the elderly.

Catalyst Product Label

Catalyst Material Safety Data Sheet (MSDS)

Catalyst Insecticide - Pint

Catalyst Insecticide is a water-based insecticide containing 18.9% Propetamphos. Recommended for tough infestations, Catalyst provides residual control of several pest insects. The product contains a water-soluble plastic that creates a non-staining and long lasting residue for extended control. Catalyst is a non-repellent contact insecticide that provides a quick knockdown to target pests, making it an ideal product to complement baits.

Why Should You Use Catalyst Insecticide?

Catalyst Insecticide is a powerful contact insecticide that provides quick knockdown and residual control of target pests.

Directions for Catalyst Insecticide Use

Catalyst Insecticide is limited to crack and crevice treatments only. Please refer to the product label for information on the limits of its use. Crack and crevice treatments require solutions that contain 0.5% active ingredient content. Mix 3.2 ounces of Catalyst Insecticide in one gallon of water to produce a diluted solution. Using appropriate spray equipment, apply the solution to cracks, crevices, voids, entry points and other sites providing harborage to insects.

Do NOT use the diluted solution as a space spray.

Where to Apply Catalyst Insecticide

Catalyst Insecticide is for indoor use only. The use of this product is limited to food and non-food handling areas of food service establishments, office buildings, commercial buildings, industrial buildings, warehouses. The product is not for use in residential areas occupied by children and the elderly.

Catalyst Product Label

Catalyst Material Safety Data Sheet (MSDS)

Catalyst Insecticide - Pint

Catalyst Insecticide is a water-based insecticide containing 18.9% Propetamphos. Recommended for tough infestations, Catalyst provides residual control of several pest insects. The product contains a water-soluble plastic that creates a non-staining and long lasting residue for extended control. Catalyst is a non-repellent contact insecticide that provides a quick knockdown to target pests, making it an ideal product to complement baits.

Why Should You Use Catalyst Insecticide?

Catalyst Insecticide is a powerful contact insecticide that provides quick knockdown and residual control of target pests.

Directions for Catalyst Insecticide Use

Catalyst Insecticide is limited to crack and crevice treatments only. Please refer to the product label for information on the limits of its use. Crack and crevice treatments require solutions that contain 0.5% active ingredient content. Mix 3.2 ounces of Catalyst Insecticide in one gallon of water to produce a diluted solution. Using appropriate spray equipment, apply the solution to cracks, crevices, voids, entry points and other sites providing harborage to insects.

Do NOT use the diluted solution as a space spray.

Where to Apply Catalyst Insecticide

Catalyst Insecticide is for indoor use only. The use of this product is limited to food and non-food handling areas of food service establishments, office buildings, commercial buildings, industrial buildings, warehouses. The product is not for use in residential areas occupied by children and the elderly.

Catalyst Product Label

Catalyst Material Safety Data Sheet (MSDS)

Catalyst Insecticide - Pint

Catalyst Insecticide is a water-based insecticide containing 18.9% Propetamphos. Recommended for tough infestations, Catalyst provides residual control of several pest insects. The product contains a water-soluble plastic that creates a non-staining and long lasting residue for extended control. Catalyst is a non-repellent contact insecticide that provides a quick knockdown to target pests, making it an ideal product to complement baits.

Why Should You Use Catalyst Insecticide?

Catalyst Insecticide is a powerful contact insecticide that provides quick knockdown and residual control of target pests.

Directions for Catalyst Insecticide Use

Catalyst Insecticide is limited to crack and crevice treatments only. Please refer to the product label for information on the limits of its use. Crack and crevice treatments require solutions that contain 0.5% active ingredient content. Mix 3.2 ounces of Catalyst Insecticide in one gallon of water to produce a diluted solution. Using appropriate spray equipment, apply the solution to cracks, crevices, voids, entry points and other sites providing harborage to insects.

Do NOT use the diluted solution as a space spray.

Where to Apply Catalyst Insecticide

Catalyst Insecticide is for indoor use only. The use of this product is limited to food and non-food handling areas of food service establishments, office buildings, commercial buildings, industrial buildings, warehouses. The product is not for use in residential areas occupied by children and the elderly.

Catalyst Product Label

Catalyst Material Safety Data Sheet (MSDS)

Catalyst Insecticide - Pint

Catalyst Insecticide is a water-based insecticide containing 18.9% Propetamphos. Recommended for tough infestations, Catalyst provides residual control of several pest insects. The product contains a water-soluble plastic that creates a non-staining and long lasting residue for extended control. Catalyst is a non-repellent contact insecticide that provides a quick knockdown to target pests, making it an ideal product to complement baits.

Why Should You Use Catalyst Insecticide?

Catalyst Insecticide is a powerful contact insecticide that provides quick knockdown and residual control of target pests.

Directions for Catalyst Insecticide Use

Catalyst Insecticide is limited to crack and crevice treatments only. Please refer to the product label for information on the limits of its use. Crack and crevice treatments require solutions that contain 0.5% active ingredient content. Mix 3.2 ounces of Catalyst Insecticide in one gallon of water to produce a diluted solution. Using appropriate spray equipment, apply the solution to cracks, crevices, voids, entry points and other sites providing harborage to insects.

Do NOT use the diluted solution as a space spray.

Where to Apply Catalyst Insecticide

Catalyst Insecticide is for indoor use only. The use of this product is limited to food and non-food handling areas of food service establishments, office buildings, commercial buildings, industrial buildings, warehouses. The product is not for use in residential areas occupied by children and the elderly.

CB D-FOAM Product Label

CB D-FOAM Material Safety Data Sheet (MSDS)

CB D-Foam - 17 oz. can

Waterbury's CB line of residuals now includes a ready-to-use contact insecticide in a foam solution. With a high expansion rate, CB D-Foam fills voids rapidly to control insects in hard to reach areas. The product targets a broad range of pest insects including termites, ants, bees, beetles and cockroaches. CB D-Foam offers long lasting residual control that lasts for up to 8 weeks! CB D-Foam contains Deltamethrin, a synthetic pyrethroid insecticide widely used due to its effectiveness and its low toxicity to mammals.

Why Should You Use CB D-Foam ?

CB D-Foam is unrivaled in contact kill and residual control efficiency. Once applied the product continues to kill pests for 2 months, greatly reducing control costs.

Directions for CB D-Foam Use

Shake well before using. Hold container upright and direct the nozzle towards the treatment area. For crack and crevice treatments, remove the nozzle cap from the container and install the supplied actuator. Replace the protective cap. Aim the nozzle towards the treatment area, press the button and apply the product as directed in the product label.

CB D-Foam is suitable for surface applications, crack and crevice applications, spot treatments and wall void applications. To control subterranean termites in above-ground areas of structures, first locate galleries, voids and tunnels in wooden structural components using available location techniques. It is sometimes necessary to drill holes in order to access and inject foam into insect galleries. Apply the product to voids/areas where insects frequent, breed, and hide.

Where to Apply CB D-Foam

CB D-Foam is for use in and around: Homes, Apartments, Hospitals, Hotels, Food Handling Establishments, Restaurants, Food Processing Plants, Industrial Buildings, Storage Areas, Warehouses, and Transport Vehicles.

CB D-FOAM Product Label

CB D-FOAM Material Safety Data Sheet (MSDS)

CB D-Foam - 17 oz. can

Waterbury's CB line of residuals now includes a ready-to-use contact insecticide in a foam solution. With a high expansion rate, CB D-Foam fills voids rapidly to control insects in hard to reach areas. The product targets a broad range of pest insects including termites, ants, bees, beetles and cockroaches. CB D-Foam offers long lasting residual control that lasts for up to 8 weeks! CB D-Foam contains Deltamethrin, a synthetic pyrethroid insecticide widely used due to its effectiveness and its low toxicity to mammals.

Why Should You Use CB D-Foam ?

CB D-Foam is unrivaled in contact kill and residual control efficiency. Once applied the product continues to kill pests for 2 months, greatly reducing control costs.

Directions for CB D-Foam Use

Shake well before using. Hold container upright and direct the nozzle towards the treatment area. For crack and crevice treatments, remove the nozzle cap from the container and install the supplied actuator. Replace the protective cap. Aim the nozzle towards the treatment area, press the button and apply the product as directed in the product label.

CB D-Foam is suitable for surface applications, crack and crevice applications, spot treatments and wall void applications. To control subterranean termites in above-ground areas of structures, first locate galleries, voids and tunnels in wooden structural components using available location techniques. It is sometimes necessary to drill holes in order to access and inject foam into insect galleries. Apply the product to voids/areas where insects frequent, breed, and hide.

Where to Apply CB D-Foam

CB D-Foam is for use in and around: Homes, Apartments, Hospitals, Hotels, Food Handling Establishments, Restaurants, Food Processing Plants, Industrial Buildings, Storage Areas, Warehouses, and Transport Vehicles.

CB D-FOAM Product Label

CB D-FOAM Material Safety Data Sheet (MSDS)

CB D-Foam - 17 oz. can

Waterbury's CB line of residuals now includes a ready-to-use contact insecticide in a foam solution. With a high expansion rate, CB D-Foam fills voids rapidly to control insects in hard to reach areas. The product targets a broad range of pest insects including termites, ants, bees, beetles and cockroaches. CB D-Foam offers long lasting residual control that lasts for up to 8 weeks! CB D-Foam contains Deltamethrin, a synthetic pyrethroid insecticide widely used due to its effectiveness and its low toxicity to mammals.

Why Should You Use CB D-Foam ?

CB D-Foam is unrivaled in contact kill and residual control efficiency. Once applied the product continues to kill pests for 2 months, greatly reducing control costs.

Directions for CB D-Foam Use

Shake well before using. Hold container upright and direct the nozzle towards the treatment area. For crack and crevice treatments, remove the nozzle cap from the container and install the supplied actuator. Replace the protective cap. Aim the nozzle towards the treatment area, press the button and apply the product as directed in the product label.

CB D-Foam is suitable for surface applications, crack and crevice applications, spot treatments and wall void applications. To control subterranean termites in above-ground areas of structures, first locate galleries, voids and tunnels in wooden structural components using available location techniques. It is sometimes necessary to drill holes in order to access and inject foam into insect galleries. Apply the product to voids/areas where insects frequent, breed, and hide.

Where to Apply CB D-Foam

CB D-Foam is for use in and around: Homes, Apartments, Hospitals, Hotels, Food Handling Establishments, Restaurants, Food Processing Plants, Industrial Buildings, Storage Areas, Warehouses, and Transport Vehicles.

CB D-FOAM Product Label

CB D-FOAM Material Safety Data Sheet (MSDS)

CB D-Foam - 17 oz. can

Waterbury's CB line of residuals now includes a ready-to-use contact insecticide in a foam solution. With a high expansion rate, CB D-Foam fills voids rapidly to control insects in hard to reach areas. The product targets a broad range of pest insects including termites, ants, bees, beetles and cockroaches. CB D-Foam offers long lasting residual control that lasts for up to 8 weeks! CB D-Foam contains Deltamethrin, a synthetic pyrethroid insecticide widely used due to its effectiveness and its low toxicity to mammals.

Why Should You Use CB D-Foam ?

CB D-Foam is unrivaled in contact kill and residual control efficiency. Once applied the product continues to kill pests for 2 months, greatly reducing control costs.

Directions for CB D-Foam Use

Shake well before using. Hold container upright and direct the nozzle towards the treatment area. For crack and crevice treatments, remove the nozzle cap from the container and install the supplied actuator. Replace the protective cap. Aim the nozzle towards the treatment area, press the button and apply the product as directed in the product label.

CB D-Foam is suitable for surface applications, crack and crevice applications, spot treatments and wall void applications. To control subterranean termites in above-ground areas of structures, first locate galleries, voids and tunnels in wooden structural components using available location techniques. It is sometimes necessary to drill holes in order to access and inject foam into insect galleries. Apply the product to voids/areas where insects frequent, breed, and hide.

Where to Apply CB D-Foam

CB D-Foam is for use in and around: Homes, Apartments, Hospitals, Hotels, Food Handling Establishments, Restaurants, Food Processing Plants, Industrial Buildings, Storage Areas, Warehouses, and Transport Vehicles.

CB Intruder HPX Product Label

CB Intruder HPX Material Safety Data Sheet (MSDS)

CB Intruder HPX - 14 oz.

CB Intruder HPX-15 Residual with Cyfluthrin provides fast knockdown with 4-8 week residual action. CB Intruder HPX-15 Residual with Cyfluthrin is ideal for crack and crevice control in food handling areas.

Please refer to and follow the instruction on the CB Intruder HPX Product label.

CB Intruder HPX Product Label

CB Intruder HPX Material Safety Data Sheet (MSDS)

CB Intruder HPX - 14 oz.

CB Intruder HPX-15 Residual with Cyfluthrin provides fast knockdown with 4-8 week residual action. CB Intruder HPX-15 Residual with Cyfluthrin is ideal for crack and crevice control in food handling areas.

Please refer to and follow the instruction on the CB Intruder HPX Product label.

CB Intruder HPX Product Label

CB Intruder HPX Material Safety Data Sheet (MSDS)

CB Intruder HPX - 14 oz.

CB Intruder HPX-15 Residual with Cyfluthrin provides fast knockdown with 4-8 week residual action. CB Intruder HPX-15 Residual with Cyfluthrin is ideal for crack and crevice control in food handling areas.

Please refer to and follow the instruction on the CB Intruder HPX Product label.

CB Intruder HPX Product Label

CB Intruder HPX Material Safety Data Sheet (MSDS)

CB Intruder HPX - 14 oz.

CB Intruder HPX-15 Residual with Cyfluthrin provides fast knockdown with 4-8 week residual action. CB Intruder HPX-15 Residual with Cyfluthrin is ideal for crack and crevice control in food handling areas.

Please refer to and follow the instruction on the CB Intruder HPX Product label.

CB Intruder HPX Product Label

CB Intruder HPX Material Safety Data Sheet (MSDS)

CB Intruder HPX - 14 oz.

CB Intruder HPX-15 Residual with Cyfluthrin provides fast knockdown with 4-8 week residual action. CB Intruder HPX-15 Residual with Cyfluthrin is ideal for crack and crevice control in food handling areas.

Please refer to and follow the instruction on the CB Intruder HPX Product label.

CB Intruder HPX Product Label

CB Intruder HPX Material Safety Data Sheet (MSDS)

CB Intruder HPX - 14 oz.

CB Intruder HPX-15 Residual with Cyfluthrin provides fast knockdown with 4-8 week residual action. CB Intruder HPX-15 Residual with Cyfluthrin is ideal for crack and crevice control in food handling areas.

Please refer to and follow the instruction on the CB Intruder HPX Product label.

CB Intruder HPX Product Label

CB Intruder HPX Material Safety Data Sheet (MSDS)

CB Intruder HPX - 14 oz.

CB Intruder HPX-15 Residual with Cyfluthrin provides fast knockdown with 4-8 week residual action. CB Intruder HPX-15 Residual with Cyfluthrin is ideal for crack and crevice control in food handling areas.

Please refer to and follow the instruction on the CB Intruder HPX Product label.

CB-80 Extra Product Label

CB-80 Extra Material Safety Data Sheet (MSDS)

CB-80 Extra aerosol - 17 oz.

CB-80 Extra is today's best-selling contact-kill insecticide used by all the pro's in the industry. CB-80 provides extra-fast knockdown and elimination of most common pests. The ingredients in CB-80 Extra are safe enough to be used in food handling establishments, such as restaurants, supermarkets, and farms as well as residential and commercial establishments.

Why Should You Use CB-80 EXTRA?

CB-80 EXTRA is unparrallelled in proving fast knockdown to a number of household pests including flies, mosquitoes, cockroaches. Excellent for use as a space spray, CB-80 contains no harmful chemicals and is safe to use in food storage areas to treat pantry pests. Licensed by the USDA for use in Federally Inspected Meat and Poultry Plants, the product can also be used to treat animals and animal facilities

Directions for CB-80 EXTRA Use

CB-80 can be used as an indoor surface/contact spray, space spray or as a crack and crevice spray. When using the product to treat spaces, first calculate the size of the space to be treated and spray at rates recommended in the product label. For crack and crevice treatments, calculate the volume of the void and treat using the supplied crack and crevice nozzle. Spray towards areas where insects frequent, hide and congregate. Treated areas/spaces must be ventilated before reoccupying.

FOR CONTROL OF FLYING INSECTS SUCH AS FLIES, GNATS, MOSQUITOES, MOTHS AND WASPS - Calculate the volume of the space to be treated and apply at the rate of 2 to 3 seconds per 1,000 cubic feet.

FOR CRAWLING INSECTS SUCH AS COCKROACHES, ANTS AND SPIDERS -Before applications, turn off air conditioners and close all doors and windows. Treat hiding spaces such as cabinets, under sinks, cracks and crevices, behind appliances, along plumbing, baseboards and floors. Hit the insects whenever possible. Spray CB-80 for 20 seconds per 1,000 cu. ft. of space. Keep treated areas closed for 15 minutes. Open and ventilate areas before reoccupying.

FOR PANTRY PESTS LIKE CONFUSED FLOUR BEETLES, SAWTOOTH GRAIN BEETLES, GRANARY WEEVILS, RICE WEEVILS, RED FLOUR BEETLES AND GRAIN MOTHS - Exposed or infested food products should be disposed of before treatments. Spray cracks and crevices, food containers and other areas where insects are seen. Spray surfaces at the rate of 30 seconds per 100 square feet. Keep the area closed for 45 to 60 minutes.

FOR DAIRY FARM, HORSE BARN, CATTLE, HOG AND POULTRY OPERATIONS - Close all doors and windows before treating the area. Cover Spray at the rate of 2-3 seconds per 1,000 cubic feet of space. Evacuate the treated area and keep it closed for 15 minutes. Treat these areas daily or as necessary.

TREATMENT OF ANIMALS (COW, HORSE AND SWINE) - Thoroughly spray over the entire animal from a distance of 2 feet. Do NOT spray directly towards the animal's face or eyes. Treat animals daily or if necessary.

Carefully read the product label for application instructions and precautions.

Where to Apply CB-80 EXTRA

CB-80 EXTRA is for use in: Homes, Apartments, Offices, Hotels, Hospitals, Schools, Nursing Homes, Day Care Centers, Warehouses, Stores, Restaurants, Food Handling Establishments, Food Processing Plants, Transportation Equipment, Barns, Stables, Farms, Animal Quarters, Milking Rooms and Poultry Houses.

CB-80 Extra Product Label

CB-80 Extra Material Safety Data Sheet (MSDS)

CB-80 Extra aerosol - 17 oz.

CB-80 Extra is today's best-selling contact-kill insecticide used by all the pro's in the industry. CB-80 provides extra-fast knockdown and elimination of most common pests. The ingredients in CB-80 Extra are safe enough to be used in food handling establishments, such as restaurants, supermarkets, and farms as well as residential and commercial establishments.

Why Should You Use CB-80 EXTRA?

CB-80 EXTRA is unparrallelled in proving fast knockdown to a number of household pests including flies, mosquitoes, cockroaches. Excellent for use as a space spray, CB-80 contains no harmful chemicals and is safe to use in food storage areas to treat pantry pests. Licensed by the USDA for use in Federally Inspected Meat and Poultry Plants, the product can also be used to treat animals and animal facilities

Directions for CB-80 EXTRA Use

CB-80 can be used as an indoor surface/contact spray, space spray or as a crack and crevice spray. When using the product to treat spaces, first calculate the size of the space to be treated and spray at rates recommended in the product label. For crack and crevice treatments, calculate the volume of the void and treat using the supplied crack and crevice nozzle. Spray towards areas where insects frequent, hide and congregate. Treated areas/spaces must be ventilated before reoccupying.

FOR CONTROL OF FLYING INSECTS SUCH AS FLIES, GNATS, MOSQUITOES, MOTHS AND WASPS - Calculate the volume of the space to be treated and apply at the rate of 2 to 3 seconds per 1,000 cubic feet.

FOR CRAWLING INSECTS SUCH AS COCKROACHES, ANTS AND SPIDERS -Before applications, turn off air conditioners and close all doors and windows. Treat hiding spaces such as cabinets, under sinks, cracks and crevices, behind appliances, along plumbing, baseboards and floors. Hit the insects whenever possible. Spray CB-80 for 20 seconds per 1,000 cu. ft. of space. Keep treated areas closed for 15 minutes. Open and ventilate areas before reoccupying.

FOR PANTRY PESTS LIKE CONFUSED FLOUR BEETLES, SAWTOOTH GRAIN BEETLES, GRANARY WEEVILS, RICE WEEVILS, RED FLOUR BEETLES AND GRAIN MOTHS - Exposed or infested food products should be disposed of before treatments. Spray cracks and crevices, food containers and other areas where insects are seen. Spray surfaces at the rate of 30 seconds per 100 square feet. Keep the area closed for 45 to 60 minutes.

FOR DAIRY FARM, HORSE BARN, CATTLE, HOG AND POULTRY OPERATIONS - Close all doors and windows before treating the area. Cover Spray at the rate of 2-3 seconds per 1,000 cubic feet of space. Evacuate the treated area and keep it closed for 15 minutes. Treat these areas daily or as necessary.

TREATMENT OF ANIMALS (COW, HORSE AND SWINE) - Thoroughly spray over the entire animal from a distance of 2 feet. Do NOT spray directly towards the animal's face or eyes. Treat animals daily or if necessary.

Carefully read the product label for application instructions and precautions.

Where to Apply CB-80 EXTRA

CB-80 EXTRA is for use in: Homes, Apartments, Offices, Hotels, Hospitals, Schools, Nursing Homes, Day Care Centers, Warehouses, Stores, Restaurants, Food Handling Establishments, Food Processing Plants, Transportation Equipment, Barns, Stables, Farms, Animal Quarters, Milking Rooms and Poultry Houses.

CB-80 Extra Product Label

CB-80 Extra Material Safety Data Sheet (MSDS)

CB-80 Extra aerosol - 17 oz.

CB-80 Extra is today's best-selling contact-kill insecticide used by all the pro's in the industry. CB-80 provides extra-fast knockdown and elimination of most common pests. The ingredients in CB-80 Extra are safe enough to be used in food handling establishments, such as restaurants, supermarkets, and farms as well as residential and commercial establishments.

Why Should You Use CB-80 EXTRA?

CB-80 EXTRA is unparrallelled in proving fast knockdown to a number of household pests including flies, mosquitoes, cockroaches. Excellent for use as a space spray, CB-80 contains no harmful chemicals and is safe to use in food storage areas to treat pantry pests. Licensed by the USDA for use in Federally Inspected Meat and Poultry Plants, the product can also be used to treat animals and animal facilities

Directions for CB-80 EXTRA Use

CB-80 can be used as an indoor surface/contact spray, space spray or as a crack and crevice spray. When using the product to treat spaces, first calculate the size of the space to be treated and spray at rates recommended in the product label. For crack and crevice treatments, calculate the volume of the void and treat using the supplied crack and crevice nozzle. Spray towards areas where insects frequent, hide and congregate. Treated areas/spaces must be ventilated before reoccupying.

FOR CONTROL OF FLYING INSECTS SUCH AS FLIES, GNATS, MOSQUITOES, MOTHS AND WASPS - Calculate the volume of the space to be treated and apply at the rate of 2 to 3 seconds per 1,000 cubic feet.

FOR CRAWLING INSECTS SUCH AS COCKROACHES, ANTS AND SPIDERS -Before applications, turn off air conditioners and close all doors and windows. Treat hiding spaces such as cabinets, under sinks, cracks and crevices, behind appliances, along plumbing, baseboards and floors. Hit the insects whenever possible. Spray CB-80 for 20 seconds per 1,000 cu. ft. of space. Keep treated areas closed for 15 minutes. Open and ventilate areas before reoccupying.

FOR PANTRY PESTS LIKE CONFUSED FLOUR BEETLES, SAWTOOTH GRAIN BEETLES, GRANARY WEEVILS, RICE WEEVILS, RED FLOUR BEETLES AND GRAIN MOTHS - Exposed or infested food products should be disposed of before treatments. Spray cracks and crevices, food containers and other areas where insects are seen. Spray surfaces at the rate of 30 seconds per 100 square feet. Keep the area closed for 45 to 60 minutes.

FOR DAIRY FARM, HORSE BARN, CATTLE, HOG AND POULTRY OPERATIONS - Close all doors and windows before treating the area. Cover Spray at the rate of 2-3 seconds per 1,000 cubic feet of space. Evacuate the treated area and keep it closed for 15 minutes. Treat these areas daily or as necessary.

TREATMENT OF ANIMALS (COW, HORSE AND SWINE) - Thoroughly spray over the entire animal from a distance of 2 feet. Do NOT spray directly towards the animal's face or eyes. Treat animals daily or if necessary.

Carefully read the product label for application instructions and precautions.

Where to Apply CB-80 EXTRA

CB-80 EXTRA is for use in: Homes, Apartments, Offices, Hotels, Hospitals, Schools, Nursing Homes, Day Care Centers, Warehouses, Stores, Restaurants, Food Handling Establishments, Food Processing Plants, Transportation Equipment, Barns, Stables, Farms, Animal Quarters, Milking Rooms and Poultry Houses.

CB-80 Extra Product Label

CB-80 Extra Material Safety Data Sheet (MSDS)

CB-80 Extra aerosol - 17 oz.

CB-80 Extra is today's best-selling contact-kill insecticide used by all the pro's in the industry. CB-80 provides extra-fast knockdown and elimination of most common pests. The ingredients in CB-80 Extra are safe enough to be used in food handling establishments, such as restaurants, supermarkets, and farms as well as residential and commercial establishments.

Why Should You Use CB-80 EXTRA?

CB-80 EXTRA is unparrallelled in proving fast knockdown to a number of household pests including flies, mosquitoes, cockroaches. Excellent for use as a space spray, CB-80 contains no harmful chemicals and is safe to use in food storage areas to treat pantry pests. Licensed by the USDA for use in Federally Inspected Meat and Poultry Plants, the product can also be used to treat animals and animal facilities

Directions for CB-80 EXTRA Use

CB-80 can be used as an indoor surface/contact spray, space spray or as a crack and crevice spray. When using the product to treat spaces, first calculate the size of the space to be treated and spray at rates recommended in the product label. For crack and crevice treatments, calculate the volume of the void and treat using the supplied crack and crevice nozzle. Spray towards areas where insects frequent, hide and congregate. Treated areas/spaces must be ventilated before reoccupying.

FOR CONTROL OF FLYING INSECTS SUCH AS FLIES, GNATS, MOSQUITOES, MOTHS AND WASPS - Calculate the volume of the space to be treated and apply at the rate of 2 to 3 seconds per 1,000 cubic feet.

FOR CRAWLING INSECTS SUCH AS COCKROACHES, ANTS AND SPIDERS -Before applications, turn off air conditioners and close all doors and windows. Treat hiding spaces such as cabinets, under sinks, cracks and crevices, behind appliances, along plumbing, baseboards and floors. Hit the insects whenever possible. Spray CB-80 for 20 seconds per 1,000 cu. ft. of space. Keep treated areas closed for 15 minutes. Open and ventilate areas before reoccupying.

FOR PANTRY PESTS LIKE CONFUSED FLOUR BEETLES, SAWTOOTH GRAIN BEETLES, GRANARY WEEVILS, RICE WEEVILS, RED FLOUR BEETLES AND GRAIN MOTHS - Exposed or infested food products should be disposed of before treatments. Spray cracks and crevices, food containers and other areas where insects are seen. Spray surfaces at the rate of 30 seconds per 100 square feet. Keep the area closed for 45 to 60 minutes.

FOR DAIRY FARM, HORSE BARN, CATTLE, HOG AND POULTRY OPERATIONS - Close all doors and windows before treating the area. Cover Spray at the rate of 2-3 seconds per 1,000 cubic feet of space. Evacuate the treated area and keep it closed for 15 minutes. Treat these areas daily or as necessary.

TREATMENT OF ANIMALS (COW, HORSE AND SWINE) - Thoroughly spray over the entire animal from a distance of 2 feet. Do NOT spray directly towards the animal's face or eyes. Treat animals daily or if necessary.

Carefully read the product label for application instructions and precautions.

Where to Apply CB-80 EXTRA

CB-80 EXTRA is for use in: Homes, Apartments, Offices, Hotels, Hospitals, Schools, Nursing Homes, Day Care Centers, Warehouses, Stores, Restaurants, Food Handling Establishments, Food Processing Plants, Transportation Equipment, Barns, Stables, Farms, Animal Quarters, Milking Rooms and Poultry Houses.

CB-80 Extra Product Label

CB-80 Extra Material Safety Data Sheet (MSDS)

CB-80 Extra aerosol - 17 oz.

CB-80 Extra is today's best-selling contact-kill insecticide used by all the pro's in the industry. CB-80 provides extra-fast knockdown and elimination of most common pests. The ingredients in CB-80 Extra are safe enough to be used in food handling establishments, such as restaurants, supermarkets, and farms as well as residential and commercial establishments.

Why Should You Use CB-80 EXTRA?

CB-80 EXTRA is unparrallelled in proving fast knockdown to a number of household pests including flies, mosquitoes, cockroaches. Excellent for use as a space spray, CB-80 contains no harmful chemicals and is safe to use in food storage areas to treat pantry pests. Licensed by the USDA for use in Federally Inspected Meat and Poultry Plants, the product can also be used to treat animals and animal facilities

Directions for CB-80 EXTRA Use

CB-80 can be used as an indoor surface/contact spray, space spray or as a crack and crevice spray. When using the product to treat spaces, first calculate the size of the space to be treated and spray at rates recommended in the product label. For crack and crevice treatments, calculate the volume of the void and treat using the supplied crack and crevice nozzle. Spray towards areas where insects frequent, hide and congregate. Treated areas/spaces must be ventilated before reoccupying.

FOR CONTROL OF FLYING INSECTS SUCH AS FLIES, GNATS, MOSQUITOES, MOTHS AND WASPS - Calculate the volume of the space to be treated and apply at the rate of 2 to 3 seconds per 1,000 cubic feet.

FOR CRAWLING INSECTS SUCH AS COCKROACHES, ANTS AND SPIDERS -Before applications, turn off air conditioners and close all doors and windows. Treat hiding spaces such as cabinets, under sinks, cracks and crevices, behind appliances, along plumbing, baseboards and floors. Hit the insects whenever possible. Spray CB-80 for 20 seconds per 1,000 cu. ft. of space. Keep treated areas closed for 15 minutes. Open and ventilate areas before reoccupying.

FOR PANTRY PESTS LIKE CONFUSED FLOUR BEETLES, SAWTOOTH GRAIN BEETLES, GRANARY WEEVILS, RICE WEEVILS, RED FLOUR BEETLES AND GRAIN MOTHS - Exposed or infested food products should be disposed of before treatments. Spray cracks and crevices, food containers and other areas where insects are seen. Spray surfaces at the rate of 30 seconds per 100 square feet. Keep the area closed for 45 to 60 minutes.

FOR DAIRY FARM, HORSE BARN, CATTLE, HOG AND POULTRY OPERATIONS - Close all doors and windows before treating the area. Cover Spray at the rate of 2-3 seconds per 1,000 cubic feet of space. Evacuate the treated area and keep it closed for 15 minutes. Treat these areas daily or as necessary.

TREATMENT OF ANIMALS (COW, HORSE AND SWINE) - Thoroughly spray over the entire animal from a distance of 2 feet. Do NOT spray directly towards the animal's face or eyes. Treat animals daily or if necessary.

Carefully read the product label for application instructions and precautions.

Where to Apply CB-80 EXTRA

CB-80 EXTRA is for use in: Homes, Apartments, Offices, Hotels, Hospitals, Schools, Nursing Homes, Day Care Centers, Warehouses, Stores, Restaurants, Food Handling Establishments, Food Processing Plants, Transportation Equipment, Barns, Stables, Farms, Animal Quarters, Milking Rooms and Poultry Houses.

CB-80 Extra Product Label

CB-80 Extra Material Safety Data Sheet (MSDS)

CB-80 Extra aerosol - 17 oz.

CB-80 Extra is today's best-selling contact-kill insecticide used by all the pro's in the industry. CB-80 provides extra-fast knockdown and elimination of most common pests. The ingredients in CB-80 Extra are safe enough to be used in food handling establishments, such as restaurants, supermarkets, and farms as well as residential and commercial establishments.

Why Should You Use CB-80 EXTRA?

CB-80 EXTRA is unparrallelled in proving fast knockdown to a number of household pests including flies, mosquitoes, cockroaches. Excellent for use as a space spray, CB-80 contains no harmful chemicals and is safe to use in food storage areas to treat pantry pests. Licensed by the USDA for use in Federally Inspected Meat and Poultry Plants, the product can also be used to treat animals and animal facilities

Directions for CB-80 EXTRA Use

CB-80 can be used as an indoor surface/contact spray, space spray or as a crack and crevice spray. When using the product to treat spaces, first calculate the size of the space to be treated and spray at rates recommended in the product label. For crack and crevice treatments, calculate the volume of the void and treat using the supplied crack and crevice nozzle. Spray towards areas where insects frequent, hide and congregate. Treated areas/spaces must be ventilated before reoccupying.

FOR CONTROL OF FLYING INSECTS SUCH AS FLIES, GNATS, MOSQUITOES, MOTHS AND WASPS - Calculate the volume of the space to be treated and apply at the rate of 2 to 3 seconds per 1,000 cubic feet.

FOR CRAWLING INSECTS SUCH AS COCKROACHES, ANTS AND SPIDERS -Before applications, turn off air conditioners and close all doors and windows. Treat hiding spaces such as cabinets, under sinks, cracks and crevices, behind appliances, along plumbing, baseboards and floors. Hit the insects whenever possible. Spray CB-80 for 20 seconds per 1,000 cu. ft. of space. Keep treated areas closed for 15 minutes. Open and ventilate areas before reoccupying.

FOR PANTRY PESTS LIKE CONFUSED FLOUR BEETLES, SAWTOOTH GRAIN BEETLES, GRANARY WEEVILS, RICE WEEVILS, RED FLOUR BEETLES AND GRAIN MOTHS - Exposed or infested food products should be disposed of before treatments. Spray cracks and crevices, food containers and other areas where insects are seen. Spray surfaces at the rate of 30 seconds per 100 square feet. Keep the area closed for 45 to 60 minutes.

FOR DAIRY FARM, HORSE BARN, CATTLE, HOG AND POULTRY OPERATIONS - Close all doors and windows before treating the area. Cover Spray at the rate of 2-3 seconds per 1,000 cubic feet of space. Evacuate the treated area and keep it closed for 15 minutes. Treat these areas daily or as necessary.

TREATMENT OF ANIMALS (COW, HORSE AND SWINE) - Thoroughly spray over the entire animal from a distance of 2 feet. Do NOT spray directly towards the animal's face or eyes. Treat animals daily or if necessary.

Carefully read the product label for application instructions and precautions.

Where to Apply CB-80 EXTRA

CB-80 EXTRA is for use in: Homes, Apartments, Offices, Hotels, Hospitals, Schools, Nursing Homes, Day Care Centers, Warehouses, Stores, Restaurants, Food Handling Establishments, Food Processing Plants, Transportation Equipment, Barns, Stables, Farms, Animal Quarters, Milking Rooms and Poultry Houses.

CB-80 Extra Product Label

CB-80 Extra Material Safety Data Sheet (MSDS)

CB-80 Extra aerosol - 17 oz.

CB-80 Extra is today's best-selling contact-kill insecticide used by all the pro's in the industry. CB-80 provides extra-fast knockdown and elimination of most common pests. The ingredients in CB-80 Extra are safe enough to be used in food handling establishments, such as restaurants, supermarkets, and farms as well as residential and commercial establishments.

Why Should You Use CB-80 EXTRA?

CB-80 EXTRA is unparrallelled in proving fast knockdown to a number of household pests including flies, mosquitoes, cockroaches. Excellent for use as a space spray, CB-80 contains no harmful chemicals and is safe to use in food storage areas to treat pantry pests. Licensed by the USDA for use in Federally Inspected Meat and Poultry Plants, the product can also be used to treat animals and animal facilities

Directions for CB-80 EXTRA Use

CB-80 can be used as an indoor surface/contact spray, space spray or as a crack and crevice spray. When using the product to treat spaces, first calculate the size of the space to be treated and spray at rates recommended in the product label. For crack and crevice treatments, calculate the volume of the void and treat using the supplied crack and crevice nozzle. Spray towards areas where insects frequent, hide and congregate. Treated areas/spaces must be ventilated before reoccupying.

FOR CONTROL OF FLYING INSECTS SUCH AS FLIES, GNATS, MOSQUITOES, MOTHS AND WASPS - Calculate the volume of the space to be treated and apply at the rate of 2 to 3 seconds per 1,000 cubic feet.

FOR CRAWLING INSECTS SUCH AS COCKROACHES, ANTS AND SPIDERS -Before applications, turn off air conditioners and close all doors and windows. Treat hiding spaces such as cabinets, under sinks, cracks and crevices, behind appliances, along plumbing, baseboards and floors. Hit the insects whenever possible. Spray CB-80 for 20 seconds per 1,000 cu. ft. of space. Keep treated areas closed for 15 minutes. Open and ventilate areas before reoccupying.

FOR PANTRY PESTS LIKE CONFUSED FLOUR BEETLES, SAWTOOTH GRAIN BEETLES, GRANARY WEEVILS, RICE WEEVILS, RED FLOUR BEETLES AND GRAIN MOTHS - Exposed or infested food products should be disposed of before treatments. Spray cracks and crevices, food containers and other areas where insects are seen. Spray surfaces at the rate of 30 seconds per 100 square feet. Keep the area closed for 45 to 60 minutes.

FOR DAIRY FARM, HORSE BARN, CATTLE, HOG AND POULTRY OPERATIONS - Close all doors and windows before treating the area. Cover Spray at the rate of 2-3 seconds per 1,000 cubic feet of space. Evacuate the treated area and keep it closed for 15 minutes. Treat these areas daily or as necessary.

TREATMENT OF ANIMALS (COW, HORSE AND SWINE) - Thoroughly spray over the entire animal from a distance of 2 feet. Do NOT spray directly towards the animal's face or eyes. Treat animals daily or if necessary.

Carefully read the product label for application instructions and precautions.

Where to Apply CB-80 EXTRA

CB-80 EXTRA is for use in: Homes, Apartments, Offices, Hotels, Hospitals, Schools, Nursing Homes, Day Care Centers, Warehouses, Stores, Restaurants, Food Handling Establishments, Food Processing Plants, Transportation Equipment, Barns, Stables, Farms, Animal Quarters, Milking Rooms and Poultry Houses.

CB-80 Extra Product Label

CB-80 Extra Material Safety Data Sheet (MSDS)

CB-80 Extra aerosol - 17 oz.

CB-80 Extra is today's best-selling contact-kill insecticide used by all the pro's in the industry. CB-80 provides extra-fast knockdown and elimination of most common pests. The ingredients in CB-80 Extra are safe enough to be used in food handling establishments, such as restaurants, supermarkets, and farms as well as residential and commercial establishments.

Why Should You Use CB-80 EXTRA?

CB-80 EXTRA is unparrallelled in proving fast knockdown to a number of household pests including flies, mosquitoes, cockroaches. Excellent for use as a space spray, CB-80 contains no harmful chemicals and is safe to use in food storage areas to treat pantry pests. Licensed by the USDA for use in Federally Inspected Meat and Poultry Plants, the product can also be used to treat animals and animal facilities

Directions for CB-80 EXTRA Use

CB-80 can be used as an indoor surface/contact spray, space spray or as a crack and crevice spray. When using the product to treat spaces, first calculate the size of the space to be treated and spray at rates recommended in the product label. For crack and crevice treatments, calculate the volume of the void and treat using the supplied crack and crevice nozzle. Spray towards areas where insects frequent, hide and congregate. Treated areas/spaces must be ventilated before reoccupying.

FOR CONTROL OF FLYING INSECTS SUCH AS FLIES, GNATS, MOSQUITOES, MOTHS AND WASPS - Calculate the volume of the space to be treated and apply at the rate of 2 to 3 seconds per 1,000 cubic feet.

FOR CRAWLING INSECTS SUCH AS COCKROACHES, ANTS AND SPIDERS -Before applications, turn off air conditioners and close all doors and windows. Treat hiding spaces such as cabinets, under sinks, cracks and crevices, behind appliances, along plumbing, baseboards and floors. Hit the insects whenever possible. Spray CB-80 for 20 seconds per 1,000 cu. ft. of space. Keep treated areas closed for 15 minutes. Open and ventilate areas before reoccupying.

FOR PANTRY PESTS LIKE CONFUSED FLOUR BEETLES, SAWTOOTH GRAIN BEETLES, GRANARY WEEVILS, RICE WEEVILS, RED FLOUR BEETLES AND GRAIN MOTHS - Exposed or infested food products should be disposed of before treatments. Spray cracks and crevices, food containers and other areas where insects are seen. Spray surfaces at the rate of 30 seconds per 100 square feet. Keep the area closed for 45 to 60 minutes.

FOR DAIRY FARM, HORSE BARN, CATTLE, HOG AND POULTRY OPERATIONS - Close all doors and windows before treating the area. Cover Spray at the rate of 2-3 seconds per 1,000 cubic feet of space. Evacuate the treated area and keep it closed for 15 minutes. Treat these areas daily or as necessary.

TREATMENT OF ANIMALS (COW, HORSE AND SWINE) - Thoroughly spray over the entire animal from a distance of 2 feet. Do NOT spray directly towards the animal's face or eyes. Treat animals daily or if necessary.

Carefully read the product label for application instructions and precautions.

Where to Apply CB-80 EXTRA

CB-80 EXTRA is for use in: Homes, Apartments, Offices, Hotels, Hospitals, Schools, Nursing Homes, Day Care Centers, Warehouses, Stores, Restaurants, Food Handling Establishments, Food Processing Plants, Transportation Equipment, Barns, Stables, Farms, Animal Quarters, Milking Rooms and Poultry Houses.

CB Air Devil HPX Product Label

CB Air Devil HPX Material Safety Data Sheet (MSDS)

CB Air Devil HPX - 14 oz.

CB Air Devil HPX is an instant contact kill aerosol that also eliminates large number of pests. After the CB Air Devil HPX aerosol is used the protection will last up to 3 months.

Advantages of CB Air Devil HPX

Residual action provides up to 3 months of insect control
Specially developed to clear out large numbers of target insects fast
Quick knockdown plus low environmental impact

CB AIR DEVIL HPX IS FOR USE IN:

Homes, Laboratories, Kennels, Aircraft (cargo area), Buses, Apartments, Offices and the non-food/feed areas of Restaurants, Dairies, Milk Storage Rooms, Supermarkets, Hospitals (non-occupied patient areas), Egg Processing Plants, Bakeries, Bottling Plants, Institutions, Hotels, Motels, Stables, Schools, Nursing Homes (non occupied patient areas), Stores, Warehouses, Nurseries, Food Manufacturing, Processing and Servicing Establishments; Trucks, Trailers, Vessels, Railcars; Commercial, Industrial and Storage Buildings .

CB AIR DEVIL HPX FOR RESIDUAL PEST CONTROL :

Homes, laboratories; NON-FOOD/NON-FEED AREAS restaurants, dairies, milk storage rooms, supermarkets, hospitals (nonoccupied patient areas), nursing homes (nonoccupied patient areas), egg processing plants, bakeries, bottling plants, institutions, hotels, motels, kennels, stables, schools, nurseries, stores, warehouses, food manufacturing, processing and servicing establishments; Transportation aircraft (cargo area), buses, trucks, trailers, vessels, railcars; Storage commercial, industrial, apartment, office and storage buildings.

CB AIR DEVIL HPX FOR CRACK AND CREVICE APPLICATION:

Cockroaches, Spiders, Crickets, Silverfish, Firebrats use injector tip, releasing approximately 1 second spray per spot. For serious infestations, spray spots approximately 12 inches apart; for light infestations, spray approximately 3 feet apart. Spray into hiding places such as cracks, crevices, openings around pipes and sinks, under refrigerators, behind baseboards, coffee makers, meter boxes, and manholes. Spray directly on insects in these locations where possible. Repeat as necessary.

CB AIR DEVIL HPX IN FOOD HANDLING ESTABLISHMENTS:

Places other than private residences in which food is held, processed, prepared or served.
Non-food Areas: This product may be used as a general spot or crack and crevice treatment in non-food areas. All areas where insects hide or through which insects may enter should be treated. Non-food areas are areas such as garbage rooms, lavatories, floor drains (to sewers), entries and vestibules, offices, locker rooms, machine rooms, boiler rooms, garages, mop closets and storage (after canning or bottling).

Food Areas: Do not use in food/feed areas of food/feed handling establishments, restaurants, or other areas where food/feed is commercially prepared or processed. Do not use in serving areas while food/feed is exposed or facility is in operation. Serving areas are areas where prepared foods are served such as dining rooms but excluding areas where food may be prepared or held. In the home, all food processing surfaces and utensils should be covered during treatment or thoroughly washed before use. Exposed food should be covered or removed.

CRAWLING INSECTS:Sowbugs, Pillbugs, Millipedes, and Centipedes apply around doors and windows and other places where these pests may be found or where they may enter premises. Spray baseboards, storage areas and other locations. Repeat as necessary. See outdoor use below. ANTS: Apply to any trails, around doors and windows and other places where ants may be found.

WOOD DESTROYING INSECTS: Treat wood suspected of harboring all species of Termites, Carpenter Ants and Carpenter Bees. The purpose of such application of Air Devil Residual is to kill workers or winged form which may be present in the treated channels at the time of treatment and to impact a temporary resistance at these places to attack which may aid in the prevention of immediate reinfestation. Such applications are not a substitute for mechanical alternation, soil treatment or foundation treatment but merely a supplement. Localized treatment of wood-infesting insects locate suspected infestation and/or insect tunnels and cavities. Inject 5 to 10 seconds of spray into insect tunnels, galleries and inaccessible closed voids. In infested sites, pilot holes should be drilled eight to ten inches apart to insure thorough insecticide gallery treatment. Make sure not to contact electrical wiring, plumbing, etc., when drilling. Use available application equipment. For Carpenter Bees, seal entrance openings with small pieces of stainless steel wool after application.

CB AIR DEVIL HPX FOR OUTDOORS:

For control of Ants, Bees, Centipedes, Cockroaches, Crickets, Firebrats, Millipedes, Silverfish, Sowbugs, Pillbugs, Spiders, Flies,and Wasps apply as a residual spray to surfaces of refuse dumps and similar areas where these pests are found.

CB Air Devil HPX Product Label

CB Air Devil HPX Material Safety Data Sheet (MSDS)

CB Air Devil HPX - 14 oz.

CB Air Devil HPX is an instant contact kill aerosol that also eliminates large number of pests. After the CB Air Devil HPX aerosol is used the protection will last up to 3 months.

Advantages of CB Air Devil HPX

Residual action provides up to 3 months of insect control
Specially developed to clear out large numbers of target insects fast
Quick knockdown plus low environmental impact

CB AIR DEVIL HPX IS FOR USE IN:

Homes, Laboratories, Kennels, Aircraft (cargo area), Buses, Apartments, Offices and the non-food/feed areas of Restaurants, Dairies, Milk Storage Rooms, Supermarkets, Hospitals (non-occupied patient areas), Egg Processing Plants, Bakeries, Bottling Plants, Institutions, Hotels, Motels, Stables, Schools, Nursing Homes (non occupied patient areas), Stores, Warehouses, Nurseries, Food Manufacturing, Processing and Servicing Establishments; Trucks, Trailers, Vessels, Railcars; Commercial, Industrial and Storage Buildings .

CB AIR DEVIL HPX FOR RESIDUAL PEST CONTROL :

Homes, laboratories; NON-FOOD/NON-FEED AREAS restaurants, dairies, milk storage rooms, supermarkets, hospitals (nonoccupied patient areas), nursing homes (nonoccupied patient areas), egg processing plants, bakeries, bottling plants, institutions, hotels, motels, kennels, stables, schools, nurseries, stores, warehouses, food manufacturing, processing and servicing establishments; Transportation aircraft (cargo area), buses, trucks, trailers, vessels, railcars; Storage commercial, industrial, apartment, office and storage buildings.

CB AIR DEVIL HPX FOR CRACK AND CREVICE APPLICATION:

Cockroaches, Spiders, Crickets, Silverfish, Firebrats use injector tip, releasing approximately 1 second spray per spot. For serious infestations, spray spots approximately 12 inches apart; for light infestations, spray approximately 3 feet apart. Spray into hiding places such as cracks, crevices, openings around pipes and sinks, under refrigerators, behind baseboards, coffee makers, meter boxes, and manholes. Spray directly on insects in these locations where possible. Repeat as necessary.

CB AIR DEVIL HPX IN FOOD HANDLING ESTABLISHMENTS:

Places other than private residences in which food is held, processed, prepared or served.
Non-food Areas: This product may be used as a general spot or crack and crevice treatment in non-food areas. All areas where insects hide or through which insects may enter should be treated. Non-food areas are areas such as garbage rooms, lavatories, floor drains (to sewers), entries and vestibules, offices, locker rooms, machine rooms, boiler rooms, garages, mop closets and storage (after canning or bottling).

Food Areas: Do not use in food/feed areas of food/feed handling establishments, restaurants, or other areas where food/feed is commercially prepared or processed. Do not use in serving areas while food/feed is exposed or facility is in operation. Serving areas are areas where prepared foods are served such as dining rooms but excluding areas where food may be prepared or held. In the home, all food processing surfaces and utensils should be covered during treatment or thoroughly washed before use. Exposed food should be covered or removed.

CRAWLING INSECTS:Sowbugs, Pillbugs, Millipedes, and Centipedes apply around doors and windows and other places where these pests may be found or where they may enter premises. Spray baseboards, storage areas and other locations. Repeat as necessary. See outdoor use below. ANTS: Apply to any trails, around doors and windows and other places where ants may be found.

WOOD DESTROYING INSECTS: Treat wood suspected of harboring all species of Termites, Carpenter Ants and Carpenter Bees. The purpose of such application of Air Devil Residual is to kill workers or winged form which may be present in the treated channels at the time of treatment and to impact a temporary resistance at these places to attack which may aid in the prevention of immediate reinfestation. Such applications are not a substitute for mechanical alternation, soil treatment or foundation treatment but merely a supplement. Localized treatment of wood-infesting insects locate suspected infestation and/or insect tunnels and cavities. Inject 5 to 10 seconds of spray into insect tunnels, galleries and inaccessible closed voids. In infested sites, pilot holes should be drilled eight to ten inches apart to insure thorough insecticide gallery treatment. Make sure not to contact electrical wiring, plumbing, etc., when drilling. Use available application equipment. For Carpenter Bees, seal entrance openings with small pieces of stainless steel wool after application.

CB AIR DEVIL HPX FOR OUTDOORS:

For control of Ants, Bees, Centipedes, Cockroaches, Crickets, Firebrats, Millipedes, Silverfish, Sowbugs, Pillbugs, Spiders, Flies,and Wasps apply as a residual spray to surfaces of refuse dumps and similar areas where these pests are found.

CB Air Devil HPX Product Label

CB Air Devil HPX Material Safety Data Sheet (MSDS)

CB Air Devil HPX - 14 oz.

CB Air Devil HPX is an instant contact kill aerosol that also eliminates large number of pests. After the CB Air Devil HPX aerosol is used the protection will last up to 3 months.

Advantages of CB Air Devil HPX

Residual action provides up to 3 months of insect control
Specially developed to clear out large numbers of target insects fast
Quick knockdown plus low environmental impact

CB AIR DEVIL HPX IS FOR USE IN:

Homes, Laboratories, Kennels, Aircraft (cargo area), Buses, Apartments, Offices and the non-food/feed areas of Restaurants, Dairies, Milk Storage Rooms, Supermarkets, Hospitals (non-occupied patient areas), Egg Processing Plants, Bakeries, Bottling Plants, Institutions, Hotels, Motels, Stables, Schools, Nursing Homes (non occupied patient areas), Stores, Warehouses, Nurseries, Food Manufacturing, Processing and Servicing Establishments; Trucks, Trailers, Vessels, Railcars; Commercial, Industrial and Storage Buildings .

CB AIR DEVIL HPX FOR RESIDUAL PEST CONTROL :

Homes, laboratories; NON-FOOD/NON-FEED AREAS restaurants, dairies, milk storage rooms, supermarkets, hospitals (nonoccupied patient areas), nursing homes (nonoccupied patient areas), egg processing plants, bakeries, bottling plants, institutions, hotels, motels, kennels, stables, schools, nurseries, stores, warehouses, food manufacturing, processing and servicing establishments; Transportation aircraft (cargo area), buses, trucks, trailers, vessels, railcars; Storage commercial, industrial, apartment, office and storage buildings.

CB AIR DEVIL HPX FOR CRACK AND CREVICE APPLICATION:

Cockroaches, Spiders, Crickets, Silverfish, Firebrats use injector tip, releasing approximately 1 second spray per spot. For serious infestations, spray spots approximately 12 inches apart; for light infestations, spray approximately 3 feet apart. Spray into hiding places such as cracks, crevices, openings around pipes and sinks, under refrigerators, behind baseboards, coffee makers, meter boxes, and manholes. Spray directly on insects in these locations where possible. Repeat as necessary.

CB AIR DEVIL HPX IN FOOD HANDLING ESTABLISHMENTS:

Places other than private residences in which food is held, processed, prepared or served.
Non-food Areas: This product may be used as a general spot or crack and crevice treatment in non-food areas. All areas where insects hide or through which insects may enter should be treated. Non-food areas are areas such as garbage rooms, lavatories, floor drains (to sewers), entries and vestibules, offices, locker rooms, machine rooms, boiler rooms, garages, mop closets and storage (after canning or bottling).

Food Areas: Do not use in food/feed areas of food/feed handling establishments, restaurants, or other areas where food/feed is commercially prepared or processed. Do not use in serving areas while food/feed is exposed or facility is in operation. Serving areas are areas where prepared foods are served such as dining rooms but excluding areas where food may be prepared or held. In the home, all food processing surfaces and utensils should be covered during treatment or thoroughly washed before use. Exposed food should be covered or removed.

CRAWLING INSECTS:Sowbugs, Pillbugs, Millipedes, and Centipedes apply around doors and windows and other places where these pests may be found or where they may enter premises. Spray baseboards, storage areas and other locations. Repeat as necessary. See outdoor use below. ANTS: Apply to any trails, around doors and windows and other places where ants may be found.

WOOD DESTROYING INSECTS: Treat wood suspected of harboring all species of Termites, Carpenter Ants and Carpenter Bees. The purpose of such application of Air Devil Residual is to kill workers or winged form which may be present in the treated channels at the time of treatment and to impact a temporary resistance at these places to attack which may aid in the prevention of immediate reinfestation. Such applications are not a substitute for mechanical alternation, soil treatment or foundation treatment but merely a supplement. Localized treatment of wood-infesting insects locate suspected infestation and/or insect tunnels and cavities. Inject 5 to 10 seconds of spray into insect tunnels, galleries and inaccessible closed voids. In infested sites, pilot holes should be drilled eight to ten inches apart to insure thorough insecticide gallery treatment. Make sure not to contact electrical wiring, plumbing, etc., when drilling. Use available application equipment. For Carpenter Bees, seal entrance openings with small pieces of stainless steel wool after application.

CB AIR DEVIL HPX FOR OUTDOORS:

For control of Ants, Bees, Centipedes, Cockroaches, Crickets, Firebrats, Millipedes, Silverfish, Sowbugs, Pillbugs, Spiders, Flies,and Wasps apply as a residual spray to surfaces of refuse dumps and similar areas where these pests are found.

CB Air Devil HPX Product Label

CB Air Devil HPX Material Safety Data Sheet (MSDS)

CB Air Devil HPX - 14 oz.

CB Air Devil HPX is an instant contact kill aerosol that also eliminates large number of pests. After the CB Air Devil HPX aerosol is used the protection will last up to 3 months.

Advantages of CB Air Devil HPX

Residual action provides up to 3 months of insect control
Specially developed to clear out large numbers of target insects fast
Quick knockdown plus low environmental impact

CB AIR DEVIL HPX IS FOR USE IN:

Homes, Laboratories, Kennels, Aircraft (cargo area), Buses, Apartments, Offices and the non-food/feed areas of Restaurants, Dairies, Milk Storage Rooms, Supermarkets, Hospitals (non-occupied patient areas), Egg Processing Plants, Bakeries, Bottling Plants, Institutions, Hotels, Motels, Stables, Schools, Nursing Homes (non occupied patient areas), Stores, Warehouses, Nurseries, Food Manufacturing, Processing and Servicing Establishments; Trucks, Trailers, Vessels, Railcars; Commercial, Industrial and Storage Buildings .

CB AIR DEVIL HPX FOR RESIDUAL PEST CONTROL :

Homes, laboratories; NON-FOOD/NON-FEED AREAS restaurants, dairies, milk storage rooms, supermarkets, hospitals (nonoccupied patient areas), nursing homes (nonoccupied patient areas), egg processing plants, bakeries, bottling plants, institutions, hotels, motels, kennels, stables, schools, nurseries, stores, warehouses, food manufacturing, processing and servicing establishments; Transportation aircraft (cargo area), buses, trucks, trailers, vessels, railcars; Storage commercial, industrial, apartment, office and storage buildings.

CB AIR DEVIL HPX FOR CRACK AND CREVICE APPLICATION:

Cockroaches, Spiders, Crickets, Silverfish, Firebrats use injector tip, releasing approximately 1 second spray per spot. For serious infestations, spray spots approximately 12 inches apart; for light infestations, spray approximately 3 feet apart. Spray into hiding places such as cracks, crevices, openings around pipes and sinks, under refrigerators, behind baseboards, coffee makers, meter boxes, and manholes. Spray directly on insects in these locations where possible. Repeat as necessary.

CB AIR DEVIL HPX IN FOOD HANDLING ESTABLISHMENTS:

Places other than private residences in which food is held, processed, prepared or served.
Non-food Areas: This product may be used as a general spot or crack and crevice treatment in non-food areas. All areas where insects hide or through which insects may enter should be treated. Non-food areas are areas such as garbage rooms, lavatories, floor drains (to sewers), entries and vestibules, offices, locker rooms, machine rooms, boiler rooms, garages, mop closets and storage (after canning or bottling).

Food Areas: Do not use in food/feed areas of food/feed handling establishments, restaurants, or other areas where food/feed is commercially prepared or processed. Do not use in serving areas while food/feed is exposed or facility is in operation. Serving areas are areas where prepared foods are served such as dining rooms but excluding areas where food may be prepared or held. In the home, all food processing surfaces and utensils should be covered during treatment or thoroughly washed before use. Exposed food should be covered or removed.

CRAWLING INSECTS:Sowbugs, Pillbugs, Millipedes, and Centipedes apply around doors and windows and other places where these pests may be found or where they may enter premises. Spray baseboards, storage areas and other locations. Repeat as necessary. See outdoor use below. ANTS: Apply to any trails, around doors and windows and other places where ants may be found.

WOOD DESTROYING INSECTS: Treat wood suspected of harboring all species of Termites, Carpenter Ants and Carpenter Bees. The purpose of such application of Air Devil Residual is to kill workers or winged form which may be present in the treated channels at the time of treatment and to impact a temporary resistance at these places to attack which may aid in the prevention of immediate reinfestation. Such applications are not a substitute for mechanical alternation, soil treatment or foundation treatment but merely a supplement. Localized treatment of wood-infesting insects locate suspected infestation and/or insect tunnels and cavities. Inject 5 to 10 seconds of spray into insect tunnels, galleries and inaccessible closed voids. In infested sites, pilot holes should be drilled eight to ten inches apart to insure thorough insecticide gallery treatment. Make sure not to contact electrical wiring, plumbing, etc., when drilling. Use available application equipment. For Carpenter Bees, seal entrance openings with small pieces of stainless steel wool after application.

CB AIR DEVIL HPX FOR OUTDOORS:

For control of Ants, Bees, Centipedes, Cockroaches, Crickets, Firebrats, Millipedes, Silverfish, Sowbugs, Pillbugs, Spiders, Flies,and Wasps apply as a residual spray to surfaces of refuse dumps and similar areas where these pests are found.

CB Air Devil HPX Product Label

CB Air Devil HPX Material Safety Data Sheet (MSDS)

CB Air Devil HPX - 14 oz.

CB Air Devil HPX is an instant contact kill aerosol that also eliminates large number of pests. After the CB Air Devil HPX aerosol is used the protection will last up to 3 months.

Advantages of CB Air Devil HPX

Residual action provides up to 3 months of insect control
Specially developed to clear out large numbers of target insects fast
Quick knockdown plus low environmental impact

CB AIR DEVIL HPX IS FOR USE IN:

Homes, Laboratories, Kennels, Aircraft (cargo area), Buses, Apartments, Offices and the non-food/feed areas of Restaurants, Dairies, Milk Storage Rooms, Supermarkets, Hospitals (non-occupied patient areas), Egg Processing Plants, Bakeries, Bottling Plants, Institutions, Hotels, Motels, Stables, Schools, Nursing Homes (non occupied patient areas), Stores, Warehouses, Nurseries, Food Manufacturing, Processing and Servicing Establishments; Trucks, Trailers, Vessels, Railcars; Commercial, Industrial and Storage Buildings .

CB AIR DEVIL HPX FOR RESIDUAL PEST CONTROL :

Homes, laboratories; NON-FOOD/NON-FEED AREAS restaurants, dairies, milk storage rooms, supermarkets, hospitals (nonoccupied patient areas), nursing homes (nonoccupied patient areas), egg processing plants, bakeries, bottling plants, institutions, hotels, motels, kennels, stables, schools, nurseries, stores, warehouses, food manufacturing, processing and servicing establishments; Transportation aircraft (cargo area), buses, trucks, trailers, vessels, railcars; Storage commercial, industrial, apartment, office and storage buildings.

CB AIR DEVIL HPX FOR CRACK AND CREVICE APPLICATION:

Cockroaches, Spiders, Crickets, Silverfish, Firebrats use injector tip, releasing approximately 1 second spray per spot. For serious infestations, spray spots approximately 12 inches apart; for light infestations, spray approximately 3 feet apart. Spray into hiding places such as cracks, crevices, openings around pipes and sinks, under refrigerators, behind baseboards, coffee makers, meter boxes, and manholes. Spray directly on insects in these locations where possible. Repeat as necessary.

CB AIR DEVIL HPX IN FOOD HANDLING ESTABLISHMENTS:

Places other than private residences in which food is held, processed, prepared or served.
Non-food Areas: This product may be used as a general spot or crack and crevice treatment in non-food areas. All areas where insects hide or through which insects may enter should be treated. Non-food areas are areas such as garbage rooms, lavatories, floor drains (to sewers), entries and vestibules, offices, locker rooms, machine rooms, boiler rooms, garages, mop closets and storage (after canning or bottling).

Food Areas: Do not use in food/feed areas of food/feed handling establishments, restaurants, or other areas where food/feed is commercially prepared or processed. Do not use in serving areas while food/feed is exposed or facility is in operation. Serving areas are areas where prepared foods are served such as dining rooms but excluding areas where food may be prepared or held. In the home, all food processing surfaces and utensils should be covered during treatment or thoroughly washed before use. Exposed food should be covered or removed.

CRAWLING INSECTS:Sowbugs, Pillbugs, Millipedes, and Centipedes apply around doors and windows and other places where these pests may be found or where they may enter premises. Spray baseboards, storage areas and other locations. Repeat as necessary. See outdoor use below. ANTS: Apply to any trails, around doors and windows and other places where ants may be found.

WOOD DESTROYING INSECTS: Treat wood suspected of harboring all species of Termites, Carpenter Ants and Carpenter Bees. The purpose of such application of Air Devil Residual is to kill workers or winged form which may be present in the treated channels at the time of treatment and to impact a temporary resistance at these places to attack which may aid in the prevention of immediate reinfestation. Such applications are not a substitute for mechanical alternation, soil treatment or foundation treatment but merely a supplement. Localized treatment of wood-infesting insects locate suspected infestation and/or insect tunnels and cavities. Inject 5 to 10 seconds of spray into insect tunnels, galleries and inaccessible closed voids. In infested sites, pilot holes should be drilled eight to ten inches apart to insure thorough insecticide gallery treatment. Make sure not to contact electrical wiring, plumbing, etc., when drilling. Use available application equipment. For Carpenter Bees, seal entrance openings with small pieces of stainless steel wool after application.

CB AIR DEVIL HPX FOR OUTDOORS:

For control of Ants, Bees, Centipedes, Cockroaches, Crickets, Firebrats, Millipedes, Silverfish, Sowbugs, Pillbugs, Spiders, Flies,and Wasps apply as a residual spray to surfaces of refuse dumps and similar areas where these pests are found.

CB Air Devil HPX Product Label

CB Air Devil HPX Material Safety Data Sheet (MSDS)

CB Air Devil HPX - 14 oz.

CB Air Devil HPX is an instant contact kill aerosol that also eliminates large number of pests. After the CB Air Devil HPX aerosol is used the protection will last up to 3 months.

Advantages of CB Air Devil HPX

Residual action provides up to 3 months of insect control
Specially developed to clear out large numbers of target insects fast
Quick knockdown plus low environmental impact

CB AIR DEVIL HPX IS FOR USE IN:

Homes, Laboratories, Kennels, Aircraft (cargo area), Buses, Apartments, Offices and the non-food/feed areas of Restaurants, Dairies, Milk Storage Rooms, Supermarkets, Hospitals (non-occupied patient areas), Egg Processing Plants, Bakeries, Bottling Plants, Institutions, Hotels, Motels, Stables, Schools, Nursing Homes (non occupied patient areas), Stores, Warehouses, Nurseries, Food Manufacturing, Processing and Servicing Establishments; Trucks, Trailers, Vessels, Railcars; Commercial, Industrial and Storage Buildings .

CB AIR DEVIL HPX FOR RESIDUAL PEST CONTROL :

Homes, laboratories; NON-FOOD/NON-FEED AREAS restaurants, dairies, milk storage rooms, supermarkets, hospitals (nonoccupied patient areas), nursing homes (nonoccupied patient areas), egg processing plants, bakeries, bottling plants, institutions, hotels, motels, kennels, stables, schools, nurseries, stores, warehouses, food manufacturing, processing and servicing establishments; Transportation aircraft (cargo area), buses, trucks, trailers, vessels, railcars; Storage commercial, industrial, apartment, office and storage buildings.

CB AIR DEVIL HPX FOR CRACK AND CREVICE APPLICATION:

Cockroaches, Spiders, Crickets, Silverfish, Firebrats use injector tip, releasing approximately 1 second spray per spot. For serious infestations, spray spots approximately 12 inches apart; for light infestations, spray approximately 3 feet apart. Spray into hiding places such as cracks, crevices, openings around pipes and sinks, under refrigerators, behind baseboards, coffee makers, meter boxes, and manholes. Spray directly on insects in these locations where possible. Repeat as necessary.

CB AIR DEVIL HPX IN FOOD HANDLING ESTABLISHMENTS:

Places other than private residences in which food is held, processed, prepared or served.
Non-food Areas: This product may be used as a general spot or crack and crevice treatment in non-food areas. All areas where insects hide or through which insects may enter should be treated. Non-food areas are areas such as garbage rooms, lavatories, floor drains (to sewers), entries and vestibules, offices, locker rooms, machine rooms, boiler rooms, garages, mop closets and storage (after canning or bottling).

Food Areas: Do not use in food/feed areas of food/feed handling establishments, restaurants, or other areas where food/feed is commercially prepared or processed. Do not use in serving areas while food/feed is exposed or facility is in operation. Serving areas are areas where prepared foods are served such as dining rooms but excluding areas where food may be prepared or held. In the home, all food processing surfaces and utensils should be covered during treatment or thoroughly washed before use. Exposed food should be covered or removed.

CRAWLING INSECTS:Sowbugs, Pillbugs, Millipedes, and Centipedes apply around doors and windows and other places where these pests may be found or where they may enter premises. Spray baseboards, storage areas and other locations. Repeat as necessary. See outdoor use below. ANTS: Apply to any trails, around doors and windows and other places where ants may be found.

WOOD DESTROYING INSECTS: Treat wood suspected of harboring all species of Termites, Carpenter Ants and Carpenter Bees. The purpose of such application of Air Devil Residual is to kill workers or winged form which may be present in the treated channels at the time of treatment and to impact a temporary resistance at these places to attack which may aid in the prevention of immediate reinfestation. Such applications are not a substitute for mechanical alternation, soil treatment or foundation treatment but merely a supplement. Localized treatment of wood-infesting insects locate suspected infestation and/or insect tunnels and cavities. Inject 5 to 10 seconds of spray into insect tunnels, galleries and inaccessible closed voids. In infested sites, pilot holes should be drilled eight to ten inches apart to insure thorough insecticide gallery treatment. Make sure not to contact electrical wiring, plumbing, etc., when drilling. Use available application equipment. For Carpenter Bees, seal entrance openings with small pieces of stainless steel wool after application.

CB AIR DEVIL HPX FOR OUTDOORS:

For control of Ants, Bees, Centipedes, Cockroaches, Crickets, Firebrats, Millipedes, Silverfish, Sowbugs, Pillbugs, Spiders, Flies,and Wasps apply as a residual spray to surfaces of refuse dumps and similar areas where these pests are found.

CB Air Devil HPX Product Label

CB Air Devil HPX Material Safety Data Sheet (MSDS)

CB Air Devil HPX - 14 oz.

CB Air Devil HPX is an instant contact kill aerosol that also eliminates large number of pests. After the CB Air Devil HPX aerosol is used the protection will last up to 3 months.

Advantages of CB Air Devil HPX

Residual action provides up to 3 months of insect control
Specially developed to clear out large numbers of target insects fast
Quick knockdown plus low environmental impact

CB AIR DEVIL HPX IS FOR USE IN:

Homes, Laboratories, Kennels, Aircraft (cargo area), Buses, Apartments, Offices and the non-food/feed areas of Restaurants, Dairies, Milk Storage Rooms, Supermarkets, Hospitals (non-occupied patient areas), Egg Processing Plants, Bakeries, Bottling Plants, Institutions, Hotels, Motels, Stables, Schools, Nursing Homes (non occupied patient areas), Stores, Warehouses, Nurseries, Food Manufacturing, Processing and Servicing Establishments; Trucks, Trailers, Vessels, Railcars; Commercial, Industrial and Storage Buildings .

CB AIR DEVIL HPX FOR RESIDUAL PEST CONTROL :

Homes, laboratories; NON-FOOD/NON-FEED AREAS restaurants, dairies, milk storage rooms, supermarkets, hospitals (nonoccupied patient areas), nursing homes (nonoccupied patient areas), egg processing plants, bakeries, bottling plants, institutions, hotels, motels, kennels, stables, schools, nurseries, stores, warehouses, food manufacturing, processing and servicing establishments; Transportation aircraft (cargo area), buses, trucks, trailers, vessels, railcars; Storage commercial, industrial, apartment, office and storage buildings.

CB AIR DEVIL HPX FOR CRACK AND CREVICE APPLICATION:

Cockroaches, Spiders, Crickets, Silverfish, Firebrats use injector tip, releasing approximately 1 second spray per spot. For serious infestations, spray spots approximately 12 inches apart; for light infestations, spray approximately 3 feet apart. Spray into hiding places such as cracks, crevices, openings around pipes and sinks, under refrigerators, behind baseboards, coffee makers, meter boxes, and manholes. Spray directly on insects in these locations where possible. Repeat as necessary.

CB AIR DEVIL HPX IN FOOD HANDLING ESTABLISHMENTS:

Places other than private residences in which food is held, processed, prepared or served.
Non-food Areas: This product may be used as a general spot or crack and crevice treatment in non-food areas. All areas where insects hide or through which insects may enter should be treated. Non-food areas are areas such as garbage rooms, lavatories, floor drains (to sewers), entries and vestibules, offices, locker rooms, machine rooms, boiler rooms, garages, mop closets and storage (after canning or bottling).

Food Areas: Do not use in food/feed areas of food/feed handling establishments, restaurants, or other areas where food/feed is commercially prepared or processed. Do not use in serving areas while food/feed is exposed or facility is in operation. Serving areas are areas where prepared foods are served such as dining rooms but excluding areas where food may be prepared or held. In the home, all food processing surfaces and utensils should be covered during treatment or thoroughly washed before use. Exposed food should be covered or removed.

CRAWLING INSECTS:Sowbugs, Pillbugs, Millipedes, and Centipedes apply around doors and windows and other places where these pests may be found or where they may enter premises. Spray baseboards, storage areas and other locations. Repeat as necessary. See outdoor use below. ANTS: Apply to any trails, around doors and windows and other places where ants may be found.

WOOD DESTROYING INSECTS: Treat wood suspected of harboring all species of Termites, Carpenter Ants and Carpenter Bees. The purpose of such application of Air Devil Residual is to kill workers or winged form which may be present in the treated channels at the time of treatment and to impact a temporary resistance at these places to attack which may aid in the prevention of immediate reinfestation. Such applications are not a substitute for mechanical alternation, soil treatment or foundation treatment but merely a supplement. Localized treatment of wood-infesting insects locate suspected infestation and/or insect tunnels and cavities. Inject 5 to 10 seconds of spray into insect tunnels, galleries and inaccessible closed voids. In infested sites, pilot holes should be drilled eight to ten inches apart to insure thorough insecticide gallery treatment. Make sure not to contact electrical wiring, plumbing, etc., when drilling. Use available application equipment. For Carpenter Bees, seal entrance openings with small pieces of stainless steel wool after application.

CB AIR DEVIL HPX FOR OUTDOORS:

For control of Ants, Bees, Centipedes, Cockroaches, Crickets, Firebrats, Millipedes, Silverfish, Sowbugs, Pillbugs, Spiders, Flies,and Wasps apply as a residual spray to surfaces of refuse dumps and similar areas where these pests are found.

Conquer Product Label

Conquer Material Safety Data Sheet (MSDS)

Conquer Liquid Insecticide - 1 Pint

Widely used by PMPs due to its effectiveness, Conquer Insecticide is a general-use insecticide that targets hundreds of pest insects and provides lasting residues to prevent future infestations. The product's active ingredient is Estenvalerqate, a synthetic pyrethroid insecticide that is highly toxic to numerous pest insects even in low concentrations. Be a conqueror! Conquer pest infestations using Conquer Insecticide.

Why Should You Use Conquer Liquid Insecticide?

Conquer Insecticide covers a broad spectrum of controllable insects. The product is very economical, effective and long lasting.

Directions for Conquer Liquid Insecticide Use

Conquer Residual Insecticide concentrate may be diluted in water or oil. For general applications, mix one or two fluid ounces of Conquer EC with one gallon of water or oil. For light infestations, apply solutions containing 0.027% of the active ingredient (made by mixing one fluid ounce of Conquer CS with one gallon of water). Increase the active ingredient concentration when treating heavy infestations. Mix 2 fl. oz. of Conquer EC to a gallon of water to produce a solution containing 0.05% Estenvalergate. Apply solutions using appropriate spray equipment. Please read the product label for insect-specific control instructions.

Where to Apply Conquer Liquid Insecticide

Conquer Insecticide is for use in and around homes, apartments, schools, warehouses, office buildings, hotels, kennels, lawns, commercial buildings and industrial buildings.

Please refer to and follow the instructions on the product label.

Conquer Product Label

Conquer Material Safety Data Sheet (MSDS)

Conquer Liquid Insecticide - 1 Pint

Widely used by PMPs due to its effectiveness, Conquer Insecticide is a general-use insecticide that targets hundreds of pest insects and provides lasting residues to prevent future infestations. The product's active ingredient is Estenvalerqate, a synthetic pyrethroid insecticide that is highly toxic to numerous pest insects even in low concentrations. Be a conqueror! Conquer pest infestations using Conquer Insecticide.

Why Should You Use Conquer Liquid Insecticide?

Conquer Insecticide covers a broad spectrum of controllable insects. The product is very economical, effective and long lasting.

Directions for Conquer Liquid Insecticide Use

Conquer Residual Insecticide concentrate may be diluted in water or oil. For general applications, mix one or two fluid ounces of Conquer EC with one gallon of water or oil. For light infestations, apply solutions containing 0.027% of the active ingredient (made by mixing one fluid ounce of Conquer CS with one gallon of water). Increase the active ingredient concentration when treating heavy infestations. Mix 2 fl. oz. of Conquer EC to a gallon of water to produce a solution containing 0.05% Estenvalergate. Apply solutions using appropriate spray equipment. Please read the product label for insect-specific control instructions.

Where to Apply Conquer Liquid Insecticide

Conquer Insecticide is for use in and around homes, apartments, schools, warehouses, office buildings, hotels, kennels, lawns, commercial buildings and industrial buildings.

Please refer to and follow the instructions on the product label.

Conquer Product Label

Conquer Material Safety Data Sheet (MSDS)

Conquer Liquid Insecticide - 1 Pint

Widely used by PMPs due to its effectiveness, Conquer Insecticide is a general-use insecticide that targets hundreds of pest insects and provides lasting residues to prevent future infestations. The product's active ingredient is Estenvalerqate, a synthetic pyrethroid insecticide that is highly toxic to numerous pest insects even in low concentrations. Be a conqueror! Conquer pest infestations using Conquer Insecticide.

Why Should You Use Conquer Liquid Insecticide?

Conquer Insecticide covers a broad spectrum of controllable insects. The product is very economical, effective and long lasting.

Directions for Conquer Liquid Insecticide Use

Conquer Residual Insecticide concentrate may be diluted in water or oil. For general applications, mix one or two fluid ounces of Conquer EC with one gallon of water or oil. For light infestations, apply solutions containing 0.027% of the active ingredient (made by mixing one fluid ounce of Conquer CS with one gallon of water). Increase the active ingredient concentration when treating heavy infestations. Mix 2 fl. oz. of Conquer EC to a gallon of water to produce a solution containing 0.05% Estenvalergate. Apply solutions using appropriate spray equipment. Please read the product label for insect-specific control instructions.

Where to Apply Conquer Liquid Insecticide

Conquer Insecticide is for use in and around homes, apartments, schools, warehouses, office buildings, hotels, kennels, lawns, commercial buildings and industrial buildings.

Please refer to and follow the instructions on the product label.

Conquer Product Label

Conquer Material Safety Data Sheet (MSDS)

Conquer Liquid Insecticide - 1 Pint

Widely used by PMPs due to its effectiveness, Conquer Insecticide is a general-use insecticide that targets hundreds of pest insects and provides lasting residues to prevent future infestations. The product's active ingredient is Estenvalerqate, a synthetic pyrethroid insecticide that is highly toxic to numerous pest insects even in low concentrations. Be a conqueror! Conquer pest infestations using Conquer Insecticide.

Why Should You Use Conquer Liquid Insecticide?

Conquer Insecticide covers a broad spectrum of controllable insects. The product is very economical, effective and long lasting.

Directions for Conquer Liquid Insecticide Use

Conquer Residual Insecticide concentrate may be diluted in water or oil. For general applications, mix one or two fluid ounces of Conquer EC with one gallon of water or oil. For light infestations, apply solutions containing 0.027% of the active ingredient (made by mixing one fluid ounce of Conquer CS with one gallon of water). Increase the active ingredient concentration when treating heavy infestations. Mix 2 fl. oz. of Conquer EC to a gallon of water to produce a solution containing 0.05% Estenvalergate. Apply solutions using appropriate spray equipment. Please read the product label for insect-specific control instructions.

Where to Apply Conquer Liquid Insecticide

Conquer Insecticide is for use in and around homes, apartments, schools, warehouses, office buildings, hotels, kennels, lawns, commercial buildings and industrial buildings.

Please refer to and follow the instructions on the product label.

Conquer Product Label

Conquer Material Safety Data Sheet (MSDS)

Conquer Liquid Insecticide - 1 Pint

Widely used by PMPs due to its effectiveness, Conquer Insecticide is a general-use insecticide that targets hundreds of pest insects and provides lasting residues to prevent future infestations. The product's active ingredient is Estenvalerqate, a synthetic pyrethroid insecticide that is highly toxic to numerous pest insects even in low concentrations. Be a conqueror! Conquer pest infestations using Conquer Insecticide.

Why Should You Use Conquer Liquid Insecticide?

Conquer Insecticide covers a broad spectrum of controllable insects. The product is very economical, effective and long lasting.

Directions for Conquer Liquid Insecticide Use

Conquer Residual Insecticide concentrate may be diluted in water or oil. For general applications, mix one or two fluid ounces of Conquer EC with one gallon of water or oil. For light infestations, apply solutions containing 0.027% of the active ingredient (made by mixing one fluid ounce of Conquer CS with one gallon of water). Increase the active ingredient concentration when treating heavy infestations. Mix 2 fl. oz. of Conquer EC to a gallon of water to produce a solution containing 0.05% Estenvalergate. Apply solutions using appropriate spray equipment. Please read the product label for insect-specific control instructions.

Where to Apply Conquer Liquid Insecticide

Conquer Insecticide is for use in and around homes, apartments, schools, warehouses, office buildings, hotels, kennels, lawns, commercial buildings and industrial buildings.

Please refer to and follow the instructions on the product label.

Conquer Product Label

Conquer Material Safety Data Sheet (MSDS)

Conquer Liquid Insecticide - 1 Pint

Widely used by PMPs due to its effectiveness, Conquer Insecticide is a general-use insecticide that targets hundreds of pest insects and provides lasting residues to prevent future infestations. The product's active ingredient is Estenvalerqate, a synthetic pyrethroid insecticide that is highly toxic to numerous pest insects even in low concentrations. Be a conqueror! Conquer pest infestations using Conquer Insecticide.

Why Should You Use Conquer Liquid Insecticide?

Conquer Insecticide covers a broad spectrum of controllable insects. The product is very economical, effective and long lasting.

Directions for Conquer Liquid Insecticide Use

Conquer Residual Insecticide concentrate may be diluted in water or oil. For general applications, mix one or two fluid ounces of Conquer EC with one gallon of water or oil. For light infestations, apply solutions containing 0.027% of the active ingredient (made by mixing one fluid ounce of Conquer CS with one gallon of water). Increase the active ingredient concentration when treating heavy infestations. Mix 2 fl. oz. of Conquer EC to a gallon of water to produce a solution containing 0.05% Estenvalergate. Apply solutions using appropriate spray equipment. Please read the product label for insect-specific control instructions.

Where to Apply Conquer Liquid Insecticide

Conquer Insecticide is for use in and around homes, apartments, schools, warehouses, office buildings, hotels, kennels, lawns, commercial buildings and industrial buildings.

Please refer to and follow the instructions on the product label.

Conquer Product Label

Conquer Material Safety Data Sheet (MSDS)

Conquer Liquid Insecticide - 1 Pint

Widely used by PMPs due to its effectiveness, Conquer Insecticide is a general-use insecticide that targets hundreds of pest insects and provides lasting residues to prevent future infestations. The product's active ingredient is Estenvalerqate, a synthetic pyrethroid insecticide that is highly toxic to numerous pest insects even in low concentrations. Be a conqueror! Conquer pest infestations using Conquer Insecticide.

Why Should You Use Conquer Liquid Insecticide?

Conquer Insecticide covers a broad spectrum of controllable insects. The product is very economical, effective and long lasting.

Directions for Conquer Liquid Insecticide Use

Conquer Residual Insecticide concentrate may be diluted in water or oil. For general applications, mix one or two fluid ounces of Conquer EC with one gallon of water or oil. For light infestations, apply solutions containing 0.027% of the active ingredient (made by mixing one fluid ounce of Conquer CS with one gallon of water). Increase the active ingredient concentration when treating heavy infestations. Mix 2 fl. oz. of Conquer EC to a gallon of water to produce a solution containing 0.05% Estenvalergate. Apply solutions using appropriate spray equipment. Please read the product label for insect-specific control instructions.

Where to Apply Conquer Liquid Insecticide

Conquer Insecticide is for use in and around homes, apartments, schools, warehouses, office buildings, hotels, kennels, lawns, commercial buildings and industrial buildings.

Please refer to and follow the instructions on the product label.

Conquer Product Label

Conquer Material Safety Data Sheet (MSDS)

Conquer Liquid Insecticide - 1 Pint

Widely used by PMPs due to its effectiveness, Conquer Insecticide is a general-use insecticide that targets hundreds of pest insects and provides lasting residues to prevent future infestations. The product's active ingredient is Estenvalerqate, a synthetic pyrethroid insecticide that is highly toxic to numerous pest insects even in low concentrations. Be a conqueror! Conquer pest infestations using Conquer Insecticide.

Why Should You Use Conquer Liquid Insecticide?

Conquer Insecticide covers a broad spectrum of controllable insects. The product is very economical, effective and long lasting.

Directions for Conquer Liquid Insecticide Use

Conquer Residual Insecticide concentrate may be diluted in water or oil. For general applications, mix one or two fluid ounces of Conquer EC with one gallon of water or oil. For light infestations, apply solutions containing 0.027% of the active ingredient (made by mixing one fluid ounce of Conquer CS with one gallon of water). Increase the active ingredient concentration when treating heavy infestations. Mix 2 fl. oz. of Conquer EC to a gallon of water to produce a solution containing 0.05% Estenvalergate. Apply solutions using appropriate spray equipment. Please read the product label for insect-specific control instructions.

Where to Apply Conquer Liquid Insecticide

Conquer Insecticide is for use in and around homes, apartments, schools, warehouses, office buildings, hotels, kennels, lawns, commercial buildings and industrial buildings.

Please refer to and follow the instructions on the product label.

Crack & Crevice II with Propoxur Product Label

Crack & Crevice II with Propoxur Material Safety Data Sheet (MSDS)

Crack & Crevice II Propoxur - 14 oz.

Crack & Crevice II with Propoxur is an insecticide that provides quick knockdown and long-lasting residual protection against crawling insect infestation with its superior formulation. It is ideal for direct contact kill, spot treatments and crack and crevice treatments in both residential and commercial locations, which include food handling areas. Crack & Crevice is easy to use, and can be applied upside-down, and right-side-up without leaking. Alternating with Crack & Crevice I will maximize the effect of crawling pest control.

For Use in and around: Apartments, Homes, Hospitals, Hotels, Food Storage Areas, Meat Packing Plants, Food Processing Plants, Motels, Nursing Homes, Restaurants and Other Food Handling Establishments, Supermarkets, Transportation Equipment (Buses, Boats, Ships, Trains and Planes), Warehouses and Other Commercial and Industrial Buildings.

Crack & Crevice Treatment:

Use Crack & Crevice II Propoxur with the supplied actuator and injection tubes. Inject Crack & Crevice II Propoxur into cracks and crevices or void spaces where insects may be harboring, living, and breeding. Place injector tip into cracks, crevices, holes, and other small openings where insects may enter. Spray into inaccessible areas behind and beneath sinks, stoves, cabinets, refrigerators, damp areas, and in and around waste containers.

Spot Treatment:

Use with the supplied actuator and injection tubes. Direct nozzle approximately 12 inches from surface to be treated. Apply directly on insects in these locations when possible.

Indoor Treatment:

Crawling Insects - Cockroaches, Dermestids, Scorpions, Spiders, Earwigs, Crickets, Sowbugs, Millipedes, Centipedes: Apply as a spot treatment or crack & crevice treatment. Spray into hiding places such as cracks and crevices, moist areas, openings around pipes and sinks, under refrigerators, behind baseboards, coffee makers, meter boxes, and manholes. Spray directly on insects in these locations where possible. Repeat as necessary

BOOKLICE & SILVERFISH: Spray cracks and crevices in baseboards, doorframes, bookcases, and storage areas. Spray directly on insects in these locations where possible. Repeat as necessary.

ANTS: Apply as a spot treatment or crack & crevice treatment. Spray into nests, trails, around doors, windows, into structural cracks and crevices, and wherever ants enter house. Spray directly on insects in these locations where possible. Repeat as necessary. Do not treat entire area of floor or floor covering.

Localized treatment of wood destroying insects:

CARPENTER ANTS and CARPENTER BEES: Locate source of infestation. Inject 5-10 seconds of spray into insect tunnels and cavities.

CARPENTER BEES: Seal entrance openings with small pieces of stainless steel wool after spray application.

TERMITES: Locate source of infestation. Apply to voids and channels in damaged wooden members of a structure or to cracks, spaces or bearing joints between wooden members of a structure. Inject 5-10 seconds spray into insect tunnels and cavities. This application is not a substitute for mechanical alteration, soil treatment, or foundation treatment but is merely a supplemental treatment. This product is intended to kill workers or winged reproductive forms which may be present in the treated areas.

Crack & Crevice II with Propoxur Product Label

Crack & Crevice II with Propoxur Material Safety Data Sheet (MSDS)

Crack & Crevice II Propoxur - 14 oz.

Crack & Crevice II with Propoxur is an insecticide that provides quick knockdown and long-lasting residual protection against crawling insect infestation with its superior formulation. It is ideal for direct contact kill, spot treatments and crack and crevice treatments in both residential and commercial locations, which include food handling areas. Crack & Crevice is easy to use, and can be applied upside-down, and right-side-up without leaking. Alternating with Crack & Crevice I will maximize the effect of crawling pest control.

For Use in and around: Apartments, Homes, Hospitals, Hotels, Food Storage Areas, Meat Packing Plants, Food Processing Plants, Motels, Nursing Homes, Restaurants and Other Food Handling Establishments, Supermarkets, Transportation Equipment (Buses, Boats, Ships, Trains and Planes), Warehouses and Other Commercial and Industrial Buildings.

Crack & Crevice Treatment:

Use Crack & Crevice II Propoxur with the supplied actuator and injection tubes. Inject Crack & Crevice II Propoxur into cracks and crevices or void spaces where insects may be harboring, living, and breeding. Place injector tip into cracks, crevices, holes, and other small openings where insects may enter. Spray into inaccessible areas behind and beneath sinks, stoves, cabinets, refrigerators, damp areas, and in and around waste containers.

Spot Treatment:

Use with the supplied actuator and injection tubes. Direct nozzle approximately 12 inches from surface to be treated. Apply directly on insects in these locations when possible.

Indoor Treatment:

Crawling Insects - Cockroaches, Dermestids, Scorpions, Spiders, Earwigs, Crickets, Sowbugs, Millipedes, Centipedes: Apply as a spot treatment or crack & crevice treatment. Spray into hiding places such as cracks and crevices, moist areas, openings around pipes and sinks, under refrigerators, behind baseboards, coffee makers, meter boxes, and manholes. Spray directly on insects in these locations where possible. Repeat as necessary

BOOKLICE & SILVERFISH: Spray cracks and crevices in baseboards, doorframes, bookcases, and storage areas. Spray directly on insects in these locations where possible. Repeat as necessary.

ANTS: Apply as a spot treatment or crack & crevice treatment. Spray into nests, trails, around doors, windows, into structural cracks and crevices, and wherever ants enter house. Spray directly on insects in these locations where possible. Repeat as necessary. Do not treat entire area of floor or floor covering.

Localized treatment of wood destroying insects:

CARPENTER ANTS and CARPENTER BEES: Locate source of infestation. Inject 5-10 seconds of spray into insect tunnels and cavities.

CARPENTER BEES: Seal entrance openings with small pieces of stainless steel wool after spray application.

TERMITES: Locate source of infestation. Apply to voids and channels in damaged wooden members of a structure or to cracks, spaces or bearing joints between wooden members of a structure. Inject 5-10 seconds spray into insect tunnels and cavities. This application is not a substitute for mechanical alteration, soil treatment, or foundation treatment but is merely a supplemental treatment. This product is intended to kill workers or winged reproductive forms which may be present in the treated areas.

Crack & Crevice II with Propoxur Product Label

Crack & Crevice II with Propoxur Material Safety Data Sheet (MSDS)

Crack & Crevice II Propoxur - 14 oz.

Crack & Crevice II with Propoxur is an insecticide that provides quick knockdown and long-lasting residual protection against crawling insect infestation with its superior formulation. It is ideal for direct contact kill, spot treatments and crack and crevice treatments in both residential and commercial locations, which include food handling areas. Crack & Crevice is easy to use, and can be applied upside-down, and right-side-up without leaking. Alternating with Crack & Crevice I will maximize the effect of crawling pest control.

For Use in and around: Apartments, Homes, Hospitals, Hotels, Food Storage Areas, Meat Packing Plants, Food Processing Plants, Motels, Nursing Homes, Restaurants and Other Food Handling Establishments, Supermarkets, Transportation Equipment (Buses, Boats, Ships, Trains and Planes), Warehouses and Other Commercial and Industrial Buildings.

Crack & Crevice Treatment:

Use Crack & Crevice II Propoxur with the supplied actuator and injection tubes. Inject Crack & Crevice II Propoxur into cracks and crevices or void spaces where insects may be harboring, living, and breeding. Place injector tip into cracks, crevices, holes, and other small openings where insects may enter. Spray into inaccessible areas behind and beneath sinks, stoves, cabinets, refrigerators, damp areas, and in and around waste containers.

Spot Treatment:

Use with the supplied actuator and injection tubes. Direct nozzle approximately 12 inches from surface to be treated. Apply directly on insects in these locations when possible.

Indoor Treatment:

Crawling Insects - Cockroaches, Dermestids, Scorpions, Spiders, Earwigs, Crickets, Sowbugs, Millipedes, Centipedes: Apply as a spot treatment or crack & crevice treatment. Spray into hiding places such as cracks and crevices, moist areas, openings around pipes and sinks, under refrigerators, behind baseboards, coffee makers, meter boxes, and manholes. Spray directly on insects in these locations where possible. Repeat as necessary

BOOKLICE & SILVERFISH: Spray cracks and crevices in baseboards, doorframes, bookcases, and storage areas. Spray directly on insects in these locations where possible. Repeat as necessary.

ANTS: Apply as a spot treatment or crack & crevice treatment. Spray into nests, trails, around doors, windows, into structural cracks and crevices, and wherever ants enter house. Spray directly on insects in these locations where possible. Repeat as necessary. Do not treat entire area of floor or floor covering.

Localized treatment of wood destroying insects:

CARPENTER ANTS and CARPENTER BEES: Locate source of infestation. Inject 5-10 seconds of spray into insect tunnels and cavities.

CARPENTER BEES: Seal entrance openings with small pieces of stainless steel wool after spray application.

TERMITES: Locate source of infestation. Apply to voids and channels in damaged wooden members of a structure or to cracks, spaces or bearing joints between wooden members of a structure. Inject 5-10 seconds spray into insect tunnels and cavities. This application is not a substitute for mechanical alteration, soil treatment, or foundation treatment but is merely a supplemental treatment. This product is intended to kill workers or winged reproductive forms which may be present in the treated areas.

Crack & Crevice II with Propoxur Product Label

Crack & Crevice II with Propoxur Material Safety Data Sheet (MSDS)

Crack & Crevice II Propoxur - 14 oz.

Crack & Crevice II with Propoxur is an insecticide that provides quick knockdown and long-lasting residual protection against crawling insect infestation with its superior formulation. It is ideal for direct contact kill, spot treatments and crack and crevice treatments in both residential and commercial locations, which include food handling areas. Crack & Crevice is easy to use, and can be applied upside-down, and right-side-up without leaking. Alternating with Crack & Crevice I will maximize the effect of crawling pest control.

For Use in and around: Apartments, Homes, Hospitals, Hotels, Food Storage Areas, Meat Packing Plants, Food Processing Plants, Motels, Nursing Homes, Restaurants and Other Food Handling Establishments, Supermarkets, Transportation Equipment (Buses, Boats, Ships, Trains and Planes), Warehouses and Other Commercial and Industrial Buildings.

Crack & Crevice Treatment:

Use Crack & Crevice II Propoxur with the supplied actuator and injection tubes. Inject Crack & Crevice II Propoxur into cracks and crevices or void spaces where insects may be harboring, living, and breeding. Place injector tip into cracks, crevices, holes, and other small openings where insects may enter. Spray into inaccessible areas behind and beneath sinks, stoves, cabinets, refrigerators, damp areas, and in and around waste containers.

Spot Treatment:

Use with the supplied actuator and injection tubes. Direct nozzle approximately 12 inches from surface to be treated. Apply directly on insects in these locations when possible.

Indoor Treatment:

Crawling Insects - Cockroaches, Dermestids, Scorpions, Spiders, Earwigs, Crickets, Sowbugs, Millipedes, Centipedes: Apply as a spot treatment or crack & crevice treatment. Spray into hiding places such as cracks and crevices, moist areas, openings around pipes and sinks, under refrigerators, behind baseboards, coffee makers, meter boxes, and manholes. Spray directly on insects in these locations where possible. Repeat as necessary

BOOKLICE & SILVERFISH: Spray cracks and crevices in baseboards, doorframes, bookcases, and storage areas. Spray directly on insects in these locations where possible. Repeat as necessary.

ANTS: Apply as a spot treatment or crack & crevice treatment. Spray into nests, trails, around doors, windows, into structural cracks and crevices, and wherever ants enter house. Spray directly on insects in these locations where possible. Repeat as necessary. Do not treat entire area of floor or floor covering.

Localized treatment of wood destroying insects:

CARPENTER ANTS and CARPENTER BEES: Locate source of infestation. Inject 5-10 seconds of spray into insect tunnels and cavities.

CARPENTER BEES: Seal entrance openings with small pieces of stainless steel wool after spray application.

TERMITES: Locate source of infestation. Apply to voids and channels in damaged wooden members of a structure or to cracks, spaces or bearing joints between wooden members of a structure. Inject 5-10 seconds spray into insect tunnels and cavities. This application is not a substitute for mechanical alteration, soil treatment, or foundation treatment but is merely a supplemental treatment. This product is intended to kill workers or winged reproductive forms which may be present in the treated areas.

Crack & Crevice II with Propoxur Product Label

Crack & Crevice II with Propoxur Material Safety Data Sheet (MSDS)

Crack & Crevice II Propoxur - 14 oz.

Crack & Crevice II with Propoxur is an insecticide that provides quick knockdown and long-lasting residual protection against crawling insect infestation with its superior formulation. It is ideal for direct contact kill, spot treatments and crack and crevice treatments in both residential and commercial locations, which include food handling areas. Crack & Crevice is easy to use, and can be applied upside-down, and right-side-up without leaking. Alternating with Crack & Crevice I will maximize the effect of crawling pest control.

For Use in and around: Apartments, Homes, Hospitals, Hotels, Food Storage Areas, Meat Packing Plants, Food Processing Plants, Motels, Nursing Homes, Restaurants and Other Food Handling Establishments, Supermarkets, Transportation Equipment (Buses, Boats, Ships, Trains and Planes), Warehouses and Other Commercial and Industrial Buildings.

Crack & Crevice Treatment:

Use Crack & Crevice II Propoxur with the supplied actuator and injection tubes. Inject Crack & Crevice II Propoxur into cracks and crevices or void spaces where insects may be harboring, living, and breeding. Place injector tip into cracks, crevices, holes, and other small openings where insects may enter. Spray into inaccessible areas behind and beneath sinks, stoves, cabinets, refrigerators, damp areas, and in and around waste containers.

Spot Treatment:

Use with the supplied actuator and injection tubes. Direct nozzle approximately 12 inches from surface to be treated. Apply directly on insects in these locations when possible.

Indoor Treatment:

Crawling Insects - Cockroaches, Dermestids, Scorpions, Spiders, Earwigs, Crickets, Sowbugs, Millipedes, Centipedes: Apply as a spot treatment or crack & crevice treatment. Spray into hiding places such as cracks and crevices, moist areas, openings around pipes and sinks, under refrigerators, behind baseboards, coffee makers, meter boxes, and manholes. Spray directly on insects in these locations where possible. Repeat as necessary

BOOKLICE & SILVERFISH: Spray cracks and crevices in baseboards, doorframes, bookcases, and storage areas. Spray directly on insects in these locations where possible. Repeat as necessary.

ANTS: Apply as a spot treatment or crack & crevice treatment. Spray into nests, trails, around doors, windows, into structural cracks and crevices, and wherever ants enter house. Spray directly on insects in these locations where possible. Repeat as necessary. Do not treat entire area of floor or floor covering.

Localized treatment of wood destroying insects:

CARPENTER ANTS and CARPENTER BEES: Locate source of infestation. Inject 5-10 seconds of spray into insect tunnels and cavities.

CARPENTER BEES: Seal entrance openings with small pieces of stainless steel wool after spray application.

TERMITES: Locate source of infestation. Apply to voids and channels in damaged wooden members of a structure or to cracks, spaces or bearing joints between wooden members of a structure. Inject 5-10 seconds spray into insect tunnels and cavities. This application is not a substitute for mechanical alteration, soil treatment, or foundation treatment but is merely a supplemental treatment. This product is intended to kill workers or winged reproductive forms which may be present in the treated areas.

Crack & Crevice II with Propoxur Product Label

Crack & Crevice II with Propoxur Material Safety Data Sheet (MSDS)

Crack & Crevice II Propoxur - 14 oz.

Crack & Crevice II with Propoxur is an insecticide that provides quick knockdown and long-lasting residual protection against crawling insect infestation with its superior formulation. It is ideal for direct contact kill, spot treatments and crack and crevice treatments in both residential and commercial locations, which include food handling areas. Crack & Crevice is easy to use, and can be applied upside-down, and right-side-up without leaking. Alternating with Crack & Crevice I will maximize the effect of crawling pest control.

For Use in and around: Apartments, Homes, Hospitals, Hotels, Food Storage Areas, Meat Packing Plants, Food Processing Plants, Motels, Nursing Homes, Restaurants and Other Food Handling Establishments, Supermarkets, Transportation Equipment (Buses, Boats, Ships, Trains and Planes), Warehouses and Other Commercial and Industrial Buildings.

Crack & Crevice Treatment:

Use Crack & Crevice II Propoxur with the supplied actuator and injection tubes. Inject Crack & Crevice II Propoxur into cracks and crevices or void spaces where insects may be harboring, living, and breeding. Place injector tip into cracks, crevices, holes, and other small openings where insects may enter. Spray into inaccessible areas behind and beneath sinks, stoves, cabinets, refrigerators, damp areas, and in and around waste containers.

Spot Treatment:

Use with the supplied actuator and injection tubes. Direct nozzle approximately 12 inches from surface to be treated. Apply directly on insects in these locations when possible.

Indoor Treatment:

Crawling Insects - Cockroaches, Dermestids, Scorpions, Spiders, Earwigs, Crickets, Sowbugs, Millipedes, Centipedes: Apply as a spot treatment or crack & crevice treatment. Spray into hiding places such as cracks and crevices, moist areas, openings around pipes and sinks, under refrigerators, behind baseboards, coffee makers, meter boxes, and manholes. Spray directly on insects in these locations where possible. Repeat as necessary

BOOKLICE & SILVERFISH: Spray cracks and crevices in baseboards, doorframes, bookcases, and storage areas. Spray directly on insects in these locations where possible. Repeat as necessary.

ANTS: Apply as a spot treatment or crack & crevice treatment. Spray into nests, trails, around doors, windows, into structural cracks and crevices, and wherever ants enter house. Spray directly on insects in these locations where possible. Repeat as necessary. Do not treat entire area of floor or floor covering.

Localized treatment of wood destroying insects:

CARPENTER ANTS and CARPENTER BEES: Locate source of infestation. Inject 5-10 seconds of spray into insect tunnels and cavities.

CARPENTER BEES: Seal entrance openings with small pieces of stainless steel wool after spray application.

TERMITES: Locate source of infestation. Apply to voids and channels in damaged wooden members of a structure or to cracks, spaces or bearing joints between wooden members of a structure. Inject 5-10 seconds spray into insect tunnels and cavities. This application is not a substitute for mechanical alteration, soil treatment, or foundation treatment but is merely a supplemental treatment. This product is intended to kill workers or winged reproductive forms which may be present in the treated areas.

Crack & Crevice II with Propoxur Product Label

Crack & Crevice II with Propoxur Material Safety Data Sheet (MSDS)

Crack & Crevice II Propoxur - 14 oz.

Crack & Crevice II with Propoxur is an insecticide that provides quick knockdown and long-lasting residual protection against crawling insect infestation with its superior formulation. It is ideal for direct contact kill, spot treatments and crack and crevice treatments in both residential and commercial locations, which include food handling areas. Crack & Crevice is easy to use, and can be applied upside-down, and right-side-up without leaking. Alternating with Crack & Crevice I will maximize the effect of crawling pest control.

For Use in and around: Apartments, Homes, Hospitals, Hotels, Food Storage Areas, Meat Packing Plants, Food Processing Plants, Motels, Nursing Homes, Restaurants and Other Food Handling Establishments, Supermarkets, Transportation Equipment (Buses, Boats, Ships, Trains and Planes), Warehouses and Other Commercial and Industrial Buildings.

Crack & Crevice Treatment:

Use Crack & Crevice II Propoxur with the supplied actuator and injection tubes. Inject Crack & Crevice II Propoxur into cracks and crevices or void spaces where insects may be harboring, living, and breeding. Place injector tip into cracks, crevices, holes, and other small openings where insects may enter. Spray into inaccessible areas behind and beneath sinks, stoves, cabinets, refrigerators, damp areas, and in and around waste containers.

Spot Treatment:

Use with the supplied actuator and injection tubes. Direct nozzle approximately 12 inches from surface to be treated. Apply directly on insects in these locations when possible.

Indoor Treatment:

Crawling Insects - Cockroaches, Dermestids, Scorpions, Spiders, Earwigs, Crickets, Sowbugs, Millipedes, Centipedes: Apply as a spot treatment or crack & crevice treatment. Spray into hiding places such as cracks and crevices, moist areas, openings around pipes and sinks, under refrigerators, behind baseboards, coffee makers, meter boxes, and manholes. Spray directly on insects in these locations where possible. Repeat as necessary

BOOKLICE & SILVERFISH: Spray cracks and crevices in baseboards, doorframes, bookcases, and storage areas. Spray directly on insects in these locations where possible. Repeat as necessary.

ANTS: Apply as a spot treatment or crack & crevice treatment. Spray into nests, trails, around doors, windows, into structural cracks and crevices, and wherever ants enter house. Spray directly on insects in these locations where possible. Repeat as necessary. Do not treat entire area of floor or floor covering.

Localized treatment of wood destroying insects:

CARPENTER ANTS and CARPENTER BEES: Locate source of infestation. Inject 5-10 seconds of spray into insect tunnels and cavities.

CARPENTER BEES: Seal entrance openings with small pieces of stainless steel wool after spray application.

TERMITES: Locate source of infestation. Apply to voids and channels in damaged wooden members of a structure or to cracks, spaces or bearing joints between wooden members of a structure. Inject 5-10 seconds spray into insect tunnels and cavities. This application is not a substitute for mechanical alteration, soil treatment, or foundation treatment but is merely a supplemental treatment. This product is intended to kill workers or winged reproductive forms which may be present in the treated areas.

Cy-Kick CS Insecticide Product Label

Cy-Kick CS Insecticide Material Safety Data Sheet (MSDS)

Cy-Kick CS Insecticide - 1 pint

Cy-Kick CS is a liquid insecticide with a 6.0% Cyfluthrin concentration. This fast-acting and long-lasting active ingredient effectively eliminates pests and provides a formidable barrier against future infestations indoors and outdoors. Using microencapsulation technology, Cy-Kick CS not only kills pest fast, its effects also lasts. Properly applied, Cy-Kick CS guarantees to provide your home a long-lasting pest protection for up to 3 months.

Why Should You Use Cy-Kick CS?

Cy-Kick CS is one of the best selling liquid insecticides trusted by professionals for its broad spectrum label, long residual life and effeciency.

Directions for Cy-Kick CS Use

First check the spraying equipment to be used in applying Cy-Kick CS and make sure that the equipment is clean and functioning. For your spraying equipment needs, PestMall offers a wide range of spraying equipment which can be found here.

Shake vigorously a pint of Cy-Kick CS Controlled Release Cyfluthrin Insecticide before diluting in 16 gallons of water. A ratio of 1 or 2 fluid ounces of Cy-Kick CS to a gallon of water yield 0.05% and 0.10% concentrations respectively. Concentrations may be varied depending on applications such as infestation intensity or residue control. Mix and agitate the spray solution to ensure an even mixture before spraying.

Surfaces must be prepared and thoroughly cleaned before commencing the treatment. Before treating, surfaces must be checked for exposed electrical connections and water presence. Cy-Kick CS should not be applied directly onto drifting water, which may contaminate water supplies in inhabited areas.

The product is extremely toxic and must be kept out of reach of children. Remember to wear safety apparel such as masks, gloves, goggles, boots and protective clothing before spraying.

Where to Apply Cy-Kick CS

Indoor Applications

Apply Cy-Kick CS indoors by first adding fluid ounce of Cy-Kick CS to a gallon of water for a 0.05% spray solution or increase Cy-Kick CS to water ratio as recommended. (Please refer to the Spray Dilution Chart)

Prepare and thoroughly clean indoor surfaces before treatment. Spray the diluted solution of Cy-Kick CS to infested areas, cracks, crevices and other areas frequented by pests. Treatments must be done 3 days apart if necessary.

Outdoor Applications

Apply Cy-Kick CS outdoors by first adding fluid ounce of Cy-Kick CS to a gallon of water for a 0.05% spray solution or increase Cy-Kick CS to water ratio as recommended. (Please refer to the Spray Dilution Chart)

Prepare and thoroughly clean outdoor surfaces before treating them. Spray the diluted solution of Cy-Kick CS to infested areas, cracks, crevices and other areas frequented by pests. Treatments must be done 3 days apart if necessary. Treat perimeter soil and building foundations to prevent future infestations.

Cy-Kick CS Insecticide Product Label

Cy-Kick CS Insecticide Material Safety Data Sheet (MSDS)

Cy-Kick CS Insecticide - 1 pint

Cy-Kick CS is a liquid insecticide with a 6.0% Cyfluthrin concentration. This fast-acting and long-lasting active ingredient effectively eliminates pests and provides a formidable barrier against future infestations indoors and outdoors. Using microencapsulation technology, Cy-Kick CS not only kills pest fast, its effects also lasts. Properly applied, Cy-Kick CS guarantees to provide your home a long-lasting pest protection for up to 3 months.

Why Should You Use Cy-Kick CS?

Cy-Kick CS is one of the best selling liquid insecticides trusted by professionals for its broad spectrum label, long residual life and effeciency.

Directions for Cy-Kick CS Use

First check the spraying equipment to be used in applying Cy-Kick CS and make sure that the equipment is clean and functioning. For your spraying equipment needs, PestMall offers a wide range of spraying equipment which can be found here.

Shake vigorously a pint of Cy-Kick CS Controlled Release Cyfluthrin Insecticide before diluting in 16 gallons of water. A ratio of 1 or 2 fluid ounces of Cy-Kick CS to a gallon of water yield 0.05% and 0.10% concentrations respectively. Concentrations may be varied depending on applications such as infestation intensity or residue control. Mix and agitate the spray solution to ensure an even mixture before spraying.

Surfaces must be prepared and thoroughly cleaned before commencing the treatment. Before treating, surfaces must be checked for exposed electrical connections and water presence. Cy-Kick CS should not be applied directly onto drifting water, which may contaminate water supplies in inhabited areas.

The product is extremely toxic and must be kept out of reach of children. Remember to wear safety apparel such as masks, gloves, goggles, boots and protective clothing before spraying.

Where to Apply Cy-Kick CS

Indoor Applications

Apply Cy-Kick CS indoors by first adding fluid ounce of Cy-Kick CS to a gallon of water for a 0.05% spray solution or increase Cy-Kick CS to water ratio as recommended. (Please refer to the Spray Dilution Chart)

Prepare and thoroughly clean indoor surfaces before treatment. Spray the diluted solution of Cy-Kick CS to infested areas, cracks, crevices and other areas frequented by pests. Treatments must be done 3 days apart if necessary.

Outdoor Applications

Apply Cy-Kick CS outdoors by first adding fluid ounce of Cy-Kick CS to a gallon of water for a 0.05% spray solution or increase Cy-Kick CS to water ratio as recommended. (Please refer to the Spray Dilution Chart)

Prepare and thoroughly clean outdoor surfaces before treating them. Spray the diluted solution of Cy-Kick CS to infested areas, cracks, crevices and other areas frequented by pests. Treatments must be done 3 days apart if necessary. Treat perimeter soil and building foundations to prevent future infestations.

Cy-Kick CS Insecticide Product Label

Cy-Kick CS Insecticide Material Safety Data Sheet (MSDS)

Cy-Kick CS Insecticide - 1 pint

Cy-Kick CS is a liquid insecticide with a 6.0% Cyfluthrin concentration. This fast-acting and long-lasting active ingredient effectively eliminates pests and provides a formidable barrier against future infestations indoors and outdoors. Using microencapsulation technology, Cy-Kick CS not only kills pest fast, its effects also lasts. Properly applied, Cy-Kick CS guarantees to provide your home a long-lasting pest protection for up to 3 months.

Why Should You Use Cy-Kick CS?

Cy-Kick CS is one of the best selling liquid insecticides trusted by professionals for its broad spectrum label, long residual life and effeciency.

Directions for Cy-Kick CS Use

First check the spraying equipment to be used in applying Cy-Kick CS and make sure that the equipment is clean and functioning. For your spraying equipment needs, PestMall offers a wide range of spraying equipment which can be found here.

Shake vigorously a pint of Cy-Kick CS Controlled Release Cyfluthrin Insecticide before diluting in 16 gallons of water. A ratio of 1 or 2 fluid ounces of Cy-Kick CS to a gallon of water yield 0.05% and 0.10% concentrations respectively. Concentrations may be varied depending on applications such as infestation intensity or residue control. Mix and agitate the spray solution to ensure an even mixture before spraying.

Surfaces must be prepared and thoroughly cleaned before commencing the treatment. Before treating, surfaces must be checked for exposed electrical connections and water presence. Cy-Kick CS should not be applied directly onto drifting water, which may contaminate water supplies in inhabited areas.

The product is extremely toxic and must be kept out of reach of children. Remember to wear safety apparel such as masks, gloves, goggles, boots and protective clothing before spraying.

Where to Apply Cy-Kick CS

Indoor Applications

Apply Cy-Kick CS indoors by first adding fluid ounce of Cy-Kick CS to a gallon of water for a 0.05% spray solution or increase Cy-Kick CS to water ratio as recommended. (Please refer to the Spray Dilution Chart)

Prepare and thoroughly clean indoor surfaces before treatment. Spray the diluted solution of Cy-Kick CS to infested areas, cracks, crevices and other areas frequented by pests. Treatments must be done 3 days apart if necessary.

Outdoor Applications

Apply Cy-Kick CS outdoors by first adding fluid ounce of Cy-Kick CS to a gallon of water for a 0.05% spray solution or increase Cy-Kick CS to water ratio as recommended. (Please refer to the Spray Dilution Chart)

Prepare and thoroughly clean outdoor surfaces before treating them. Spray the diluted solution of Cy-Kick CS to infested areas, cracks, crevices and other areas frequented by pests. Treatments must be done 3 days apart if necessary. Treat perimeter soil and building foundations to prevent future infestations.

Cy-Kick CS Insecticide Product Label

Cy-Kick CS Insecticide Material Safety Data Sheet (MSDS)

Cy-Kick CS Insecticide - 1 pint

Cy-Kick CS is a liquid insecticide with a 6.0% Cyfluthrin concentration. This fast-acting and long-lasting active ingredient effectively eliminates pests and provides a formidable barrier against future infestations indoors and outdoors. Using microencapsulation technology, Cy-Kick CS not only kills pest fast, its effects also lasts. Properly applied, Cy-Kick CS guarantees to provide your home a long-lasting pest protection for up to 3 months.

Why Should You Use Cy-Kick CS?

Cy-Kick CS is one of the best selling liquid insecticides trusted by professionals for its broad spectrum label, long residual life and effeciency.

Directions for Cy-Kick CS Use

First check the spraying equipment to be used in applying Cy-Kick CS and make sure that the equipment is clean and functioning. For your spraying equipment needs, PestMall offers a wide range of spraying equipment which can be found here.

Shake vigorously a pint of Cy-Kick CS Controlled Release Cyfluthrin Insecticide before diluting in 16 gallons of water. A ratio of 1 or 2 fluid ounces of Cy-Kick CS to a gallon of water yield 0.05% and 0.10% concentrations respectively. Concentrations may be varied depending on applications such as infestation intensity or residue control. Mix and agitate the spray solution to ensure an even mixture before spraying.

Surfaces must be prepared and thoroughly cleaned before commencing the treatment. Before treating, surfaces must be checked for exposed electrical connections and water presence. Cy-Kick CS should not be applied directly onto drifting water, which may contaminate water supplies in inhabited areas.

The product is extremely toxic and must be kept out of reach of children. Remember to wear safety apparel such as masks, gloves, goggles, boots and protective clothing before spraying.

Where to Apply Cy-Kick CS

Indoor Applications

Apply Cy-Kick CS indoors by first adding fluid ounce of Cy-Kick CS to a gallon of water for a 0.05% spray solution or increase Cy-Kick CS to water ratio as recommended. (Please refer to the Spray Dilution Chart)

Prepare and thoroughly clean indoor surfaces before treatment. Spray the diluted solution of Cy-Kick CS to infested areas, cracks, crevices and other areas frequented by pests. Treatments must be done 3 days apart if necessary.

Outdoor Applications

Apply Cy-Kick CS outdoors by first adding fluid ounce of Cy-Kick CS to a gallon of water for a 0.05% spray solution or increase Cy-Kick CS to water ratio as recommended. (Please refer to the Spray Dilution Chart)

Prepare and thoroughly clean outdoor surfaces before treating them. Spray the diluted solution of Cy-Kick CS to infested areas, cracks, crevices and other areas frequented by pests. Treatments must be done 3 days apart if necessary. Treat perimeter soil and building foundations to prevent future infestations.

Cy-Kick CS Insecticide Product Label

Cy-Kick CS Insecticide Material Safety Data Sheet (MSDS)

Cy-Kick CS Insecticide - 1 pint

Cy-Kick CS is a liquid insecticide with a 6.0% Cyfluthrin concentration. This fast-acting and long-lasting active ingredient effectively eliminates pests and provides a formidable barrier against future infestations indoors and outdoors. Using microencapsulation technology, Cy-Kick CS not only kills pest fast, its effects also lasts. Properly applied, Cy-Kick CS guarantees to provide your home a long-lasting pest protection for up to 3 months.

Why Should You Use Cy-Kick CS?

Cy-Kick CS is one of the best selling liquid insecticides trusted by professionals for its broad spectrum label, long residual life and effeciency.

Directions for Cy-Kick CS Use

First check the spraying equipment to be used in applying Cy-Kick CS and make sure that the equipment is clean and functioning. For your spraying equipment needs, PestMall offers a wide range of spraying equipment which can be found here.

Shake vigorously a pint of Cy-Kick CS Controlled Release Cyfluthrin Insecticide before diluting in 16 gallons of water. A ratio of 1 or 2 fluid ounces of Cy-Kick CS to a gallon of water yield 0.05% and 0.10% concentrations respectively. Concentrations may be varied depending on applications such as infestation intensity or residue control. Mix and agitate the spray solution to ensure an even mixture before spraying.

Surfaces must be prepared and thoroughly cleaned before commencing the treatment. Before treating, surfaces must be checked for exposed electrical connections and water presence. Cy-Kick CS should not be applied directly onto drifting water, which may contaminate water supplies in inhabited areas.

The product is extremely toxic and must be kept out of reach of children. Remember to wear safety apparel such as masks, gloves, goggles, boots and protective clothing before spraying.

Where to Apply Cy-Kick CS

Indoor Applications

Apply Cy-Kick CS indoors by first adding fluid ounce of Cy-Kick CS to a gallon of water for a 0.05% spray solution or increase Cy-Kick CS to water ratio as recommended. (Please refer to the Spray Dilution Chart)

Prepare and thoroughly clean indoor surfaces before treatment. Spray the diluted solution of Cy-Kick CS to infested areas, cracks, crevices and other areas frequented by pests. Treatments must be done 3 days apart if necessary.

Outdoor Applications

Apply Cy-Kick CS outdoors by first adding fluid ounce of Cy-Kick CS to a gallon of water for a 0.05% spray solution or increase Cy-Kick CS to water ratio as recommended. (Please refer to the Spray Dilution Chart)

Prepare and thoroughly clean outdoor surfaces before treating them. Spray the diluted solution of Cy-Kick CS to infested areas, cracks, crevices and other areas frequented by pests. Treatments must be done 3 days apart if necessary. Treat perimeter soil and building foundations to prevent future infestations.

Cy-Kick CS Insecticide Product Label

Cy-Kick CS Insecticide Material Safety Data Sheet (MSDS)

Cy-Kick CS Insecticide - 1 pint

Cy-Kick CS is a liquid insecticide with a 6.0% Cyfluthrin concentration. This fast-acting and long-lasting active ingredient effectively eliminates pests and provides a formidable barrier against future infestations indoors and outdoors. Using microencapsulation technology, Cy-Kick CS not only kills pest fast, its effects also lasts. Properly applied, Cy-Kick CS guarantees to provide your home a long-lasting pest protection for up to 3 months.

Why Should You Use Cy-Kick CS?

Cy-Kick CS is one of the best selling liquid insecticides trusted by professionals for its broad spectrum label, long residual life and effeciency.

Directions for Cy-Kick CS Use

First check the spraying equipment to be used in applying Cy-Kick CS and make sure that the equipment is clean and functioning. For your spraying equipment needs, PestMall offers a wide range of spraying equipment which can be found here.

Shake vigorously a pint of Cy-Kick CS Controlled Release Cyfluthrin Insecticide before diluting in 16 gallons of water. A ratio of 1 or 2 fluid ounces of Cy-Kick CS to a gallon of water yield 0.05% and 0.10% concentrations respectively. Concentrations may be varied depending on applications such as infestation intensity or residue control. Mix and agitate the spray solution to ensure an even mixture before spraying.

Surfaces must be prepared and thoroughly cleaned before commencing the treatment. Before treating, surfaces must be checked for exposed electrical connections and water presence. Cy-Kick CS should not be applied directly onto drifting water, which may contaminate water supplies in inhabited areas.

The product is extremely toxic and must be kept out of reach of children. Remember to wear safety apparel such as masks, gloves, goggles, boots and protective clothing before spraying.

Where to Apply Cy-Kick CS

Indoor Applications

Apply Cy-Kick CS indoors by first adding fluid ounce of Cy-Kick CS to a gallon of water for a 0.05% spray solution or increase Cy-Kick CS to water ratio as recommended. (Please refer to the Spray Dilution Chart)

Prepare and thoroughly clean indoor surfaces before treatment. Spray the diluted solution of Cy-Kick CS to infested areas, cracks, crevices and other areas frequented by pests. Treatments must be done 3 days apart if necessary.

Outdoor Applications

Apply Cy-Kick CS outdoors by first adding fluid ounce of Cy-Kick CS to a gallon of water for a 0.05% spray solution or increase Cy-Kick CS to water ratio as recommended. (Please refer to the Spray Dilution Chart)

Prepare and thoroughly clean outdoor surfaces before treating them. Spray the diluted solution of Cy-Kick CS to infested areas, cracks, crevices and other areas frequented by pests. Treatments must be done 3 days apart if necessary. Treat perimeter soil and building foundations to prevent future infestations.

Cy-Kick CS Insecticide Product Label

Cy-Kick CS Insecticide Material Safety Data Sheet (MSDS)

Cy-Kick CS Insecticide - 1 pint

Cy-Kick CS is a liquid insecticide with a 6.0% Cyfluthrin concentration. This fast-acting and long-lasting active ingredient effectively eliminates pests and provides a formidable barrier against future infestations indoors and outdoors. Using microencapsulation technology, Cy-Kick CS not only kills pest fast, its effects also lasts. Properly applied, Cy-Kick CS guarantees to provide your home a long-lasting pest protection for up to 3 months.

Why Should You Use Cy-Kick CS?

Cy-Kick CS is one of the best selling liquid insecticides trusted by professionals for its broad spectrum label, long residual life and effeciency.

Directions for Cy-Kick CS Use

First check the spraying equipment to be used in applying Cy-Kick CS and make sure that the equipment is clean and functioning. For your spraying equipment needs, PestMall offers a wide range of spraying equipment which can be found here.

Shake vigorously a pint of Cy-Kick CS Controlled Release Cyfluthrin Insecticide before diluting in 16 gallons of water. A ratio of 1 or 2 fluid ounces of Cy-Kick CS to a gallon of water yield 0.05% and 0.10% concentrations respectively. Concentrations may be varied depending on applications such as infestation intensity or residue control. Mix and agitate the spray solution to ensure an even mixture before spraying.

Surfaces must be prepared and thoroughly cleaned before commencing the treatment. Before treating, surfaces must be checked for exposed electrical connections and water presence. Cy-Kick CS should not be applied directly onto drifting water, which may contaminate water supplies in inhabited areas.

The product is extremely toxic and must be kept out of reach of children. Remember to wear safety apparel such as masks, gloves, goggles, boots and protective clothing before spraying.

Where to Apply Cy-Kick CS

Indoor Applications

Apply Cy-Kick CS indoors by first adding fluid ounce of Cy-Kick CS to a gallon of water for a 0.05% spray solution or increase Cy-Kick CS to water ratio as recommended. (Please refer to the Spray Dilution Chart)

Prepare and thoroughly clean indoor surfaces before treatment. Spray the diluted solution of Cy-Kick CS to infested areas, cracks, crevices and other areas frequented by pests. Treatments must be done 3 days apart if necessary.

Outdoor Applications

Apply Cy-Kick CS outdoors by first adding fluid ounce of Cy-Kick CS to a gallon of water for a 0.05% spray solution or increase Cy-Kick CS to water ratio as recommended. (Please refer to the Spray Dilution Chart)

Prepare and thoroughly clean outdoor surfaces before treating them. Spray the diluted solution of Cy-Kick CS to infested areas, cracks, crevices and other areas frequented by pests. Treatments must be done 3 days apart if necessary. Treat perimeter soil and building foundations to prevent future infestations.

Cy-Kick CS Insecticide Product Label

Cy-Kick CS Insecticide Material Safety Data Sheet (MSDS)

Cy-Kick CS Insecticide - 1 pint

Cy-Kick CS is a liquid insecticide with a 6.0% Cyfluthrin concentration. This fast-acting and long-lasting active ingredient effectively eliminates pests and provides a formidable barrier against future infestations indoors and outdoors. Using microencapsulation technology, Cy-Kick CS not only kills pest fast, its effects also lasts. Properly applied, Cy-Kick CS guarantees to provide your home a long-lasting pest protection for up to 3 months.

Why Should You Use Cy-Kick CS?

Cy-Kick CS is one of the best selling liquid insecticides trusted by professionals for its broad spectrum label, long residual life and effeciency.

Directions for Cy-Kick CS Use

First check the spraying equipment to be used in applying Cy-Kick CS and make sure that the equipment is clean and functioning. For your spraying equipment needs, PestMall offers a wide range of spraying equipment which can be found here.

Shake vigorously a pint of Cy-Kick CS Controlled Release Cyfluthrin Insecticide before diluting in 16 gallons of water. A ratio of 1 or 2 fluid ounces of Cy-Kick CS to a gallon of water yield 0.05% and 0.10% concentrations respectively. Concentrations may be varied depending on applications such as infestation intensity or residue control. Mix and agitate the spray solution to ensure an even mixture before spraying.

Surfaces must be prepared and thoroughly cleaned before commencing the treatment. Before treating, surfaces must be checked for exposed electrical connections and water presence. Cy-Kick CS should not be applied directly onto drifting water, which may contaminate water supplies in inhabited areas.

The product is extremely toxic and must be kept out of reach of children. Remember to wear safety apparel such as masks, gloves, goggles, boots and protective clothing before spraying.

Where to Apply Cy-Kick CS

Indoor Applications

Apply Cy-Kick CS indoors by first adding fluid ounce of Cy-Kick CS to a gallon of water for a 0.05% spray solution or increase Cy-Kick CS to water ratio as recommended. (Please refer to the Spray Dilution Chart)

Prepare and thoroughly clean indoor surfaces before treatment. Spray the diluted solution of Cy-Kick CS to infested areas, cracks, crevices and other areas frequented by pests. Treatments must be done 3 days apart if necessary.

Outdoor Applications

Apply Cy-Kick CS outdoors by first adding fluid ounce of Cy-Kick CS to a gallon of water for a 0.05% spray solution or increase Cy-Kick CS to water ratio as recommended. (Please refer to the Spray Dilution Chart)

Prepare and thoroughly clean outdoor surfaces before treating them. Spray the diluted solution of Cy-Kick CS to infested areas, cracks, crevices and other areas frequented by pests. Treatments must be done 3 days apart if necessary. Treat perimeter soil and building foundations to prevent future infestations.

CyhaloCap CS Product Label

CyhaloCap CS Material Safety Data Sheet (MSDS)

CyhaloCap CS Insecticide - 1 pint

High-performance microencapsulation technology for residual control. CyhaloCap CS (Capsule Suspension) Insecticide provides broad-spectrum, residual control of structural pests for PMPs who prefer lambda-cyhalothrin.

For Use in and Around: Indoor and outdoor

Product Description

CyhaloCap CS is a dilutable spray containing BASF's proprietary SmartCap microencapsulation technology and featuring lambda-cyhalothrin, a proven active ingredient with broad spectrum activity and effective residual control of structural pests.

CyhaloCap CS Product Label

CyhaloCap CS Material Safety Data Sheet (MSDS)

CyhaloCap CS Insecticide - 1 pint

High-performance microencapsulation technology for residual control. CyhaloCap CS (Capsule Suspension) Insecticide provides broad-spectrum, residual control of structural pests for PMPs who prefer lambda-cyhalothrin.

For Use in and Around: Indoor and outdoor

Product Description

CyhaloCap CS is a dilutable spray containing BASF's proprietary SmartCap microencapsulation technology and featuring lambda-cyhalothrin, a proven active ingredient with broad spectrum activity and effective residual control of structural pests.

CyhaloCap CS Product Label

CyhaloCap CS Material Safety Data Sheet (MSDS)

CyhaloCap CS Insecticide - 1 pint

High-performance microencapsulation technology for residual control. CyhaloCap CS (Capsule Suspension) Insecticide provides broad-spectrum, residual control of structural pests for PMPs who prefer lambda-cyhalothrin.

For Use in and Around: Indoor and outdoor

Product Description

CyhaloCap CS is a dilutable spray containing BASF's proprietary SmartCap microencapsulation technology and featuring lambda-cyhalothrin, a proven active ingredient with broad spectrum activity and effective residual control of structural pests.

CyhaloCap CS Product Label

CyhaloCap CS Material Safety Data Sheet (MSDS)

CyhaloCap CS Insecticide - 1 pint

High-performance microencapsulation technology for residual control. CyhaloCap CS (Capsule Suspension) Insecticide provides broad-spectrum, residual control of structural pests for PMPs who prefer lambda-cyhalothrin.

For Use in and Around: Indoor and outdoor

Product Description

CyhaloCap CS is a dilutable spray containing BASF's proprietary SmartCap microencapsulation technology and featuring lambda-cyhalothrin, a proven active ingredient with broad spectrum activity and effective residual control of structural pests.

CyhaloCap CS Product Label

CyhaloCap CS Material Safety Data Sheet (MSDS)

CyhaloCap CS Insecticide - 1 pint

High-performance microencapsulation technology for residual control. CyhaloCap CS (Capsule Suspension) Insecticide provides broad-spectrum, residual control of structural pests for PMPs who prefer lambda-cyhalothrin.

For Use in and Around: Indoor and outdoor

Product Description

CyhaloCap CS is a dilutable spray containing BASF's proprietary SmartCap microencapsulation technology and featuring lambda-cyhalothrin, a proven active ingredient with broad spectrum activity and effective residual control of structural pests.

CyhaloCap CS Product Label

CyhaloCap CS Material Safety Data Sheet (MSDS)

CyhaloCap CS Insecticide - 1 pint

High-performance microencapsulation technology for residual control. CyhaloCap CS (Capsule Suspension) Insecticide provides broad-spectrum, residual control of structural pests for PMPs who prefer lambda-cyhalothrin.

For Use in and Around: Indoor and outdoor

Product Description

CyhaloCap CS is a dilutable spray containing BASF's proprietary SmartCap microencapsulation technology and featuring lambda-cyhalothrin, a proven active ingredient with broad spectrum activity and effective residual control of structural pests.

CyhaloCap CS Product Label

CyhaloCap CS Material Safety Data Sheet (MSDS)

CyhaloCap CS Insecticide - 1 pint

High-performance microencapsulation technology for residual control. CyhaloCap CS (Capsule Suspension) Insecticide provides broad-spectrum, residual control of structural pests for PMPs who prefer lambda-cyhalothrin.

For Use in and Around: Indoor and outdoor

Product Description

CyhaloCap CS is a dilutable spray containing BASF's proprietary SmartCap microencapsulation technology and featuring lambda-cyhalothrin, a proven active ingredient with broad spectrum activity and effective residual control of structural pests.

CyhaloCap CS Product Label

CyhaloCap CS Material Safety Data Sheet (MSDS)

CyhaloCap CS Insecticide - 1 pint

High-performance microencapsulation technology for residual control. CyhaloCap CS (Capsule Suspension) Insecticide provides broad-spectrum, residual control of structural pests for PMPs who prefer lambda-cyhalothrin.

For Use in and Around: Indoor and outdoor

Product Description

CyhaloCap CS is a dilutable spray containing BASF's proprietary SmartCap microencapsulation technology and featuring lambda-cyhalothrin, a proven active ingredient with broad spectrum activity and effective residual control of structural pests.

Cynoff EC Product Label

Cynoff EC Material Safety Data Sheet (MSDS)

CYNOFF EC - 1 Quart

Cynoff EC uses a knock down method which last longer then organophosphates to control pest. Once the pest comes in contact with Cynoff EC, it is killed. Cynoff EC is an odorless insecticide concentrate and leaves no residue. Cynoff EC, along with Cynoff WP and Demon WP, belong in the synthetic pyrethroid family, carrying the same active ingredient as Cyper WP and Demon WP. You only need 1/2 to 1 ounce of Cynoff EC per gallon of water, one quart yielding 32-64 gallons.

Fortified by Cypermethrin, Cynoff EC Insecticide delivers quick and powerful cleanout control of cockroaches and other pests. Upon contact or ingestion, the active ingredient instantly paralyzes and kills insects. Commonly used for residual control or direct kill applications, Cynoff can also be used for barrier treatments with exceptional results.

Why Should You Use CYNOFF EC ?

Cynoff EC provides immediate solutions to several infestations. It is a fast-acting contact insecticide that is odorless and long lasting.

* Outdoor use only.

**Not for Indoor use in California

Directions for CYNOFF EC Use

Cynoff EC is a concentrate that must be diluted in water for spray or brushing applications. Fill sprayer tanks half-full before adding the concentrate. Add the remaining volume of water and agitate the tank to ensure a uniform mixture. Depending on the target pest/s, solutions must have 0.1% to 0.2% active ingredient content. This can be made by mixing 1/2 fl. oz. of Cynoff with 1 gallon of water to produce solutions with 0.1% A.I. concentration. Doubling the amount of the concentrate yields solutions with 0.2% A.I. content.

Apply the product as a coarse, low pressure spray to infested areas and potential insect-harboring sites such as basements, attics, behind and under appliances, storage areas, cabinets, shelves, baseboards, under sinks and along plumbing. Pay particular attention to cracks, crevices and voids.

Using hand or power sprayers, apply the product by brush or residual spray to building surfaces, porches, window screens, patios, lawns and other grass areas to control outdoor insects.

For barrier treatments, create a band measuring 6 to 10 feet around structures to protect them from infestations. Apply the product as a coarse spray, at the rate of 1 gallon per 400 square feet. Also treat building foundations and other potential entry points to a height of 3 to 5 feet.

To control cluster flies, mix 1 fluid ounce of Cynoff to 10 fluid ounces of mineral oil. Apply to 1,000 square feet of wall area using fogging equipment.

Where to Apply CYNOFF EC

Cynoff EC is for residual pest control in and on buildings and structures including: industrial buildings, houses, apartment buildings, laboratories, buses, greenhouses, and the nonfood/feed areas of stores, warehouses, vessels, railcars, trucks, trailers, aircraft (Do not use in aircraft cabins), schools, nursing homes, hospitals, restaurants, hotels, and food manufacturing, processing, and servicing establishments.

Cynoff EC Product Label

Cynoff EC Material Safety Data Sheet (MSDS)

CYNOFF EC - 1 Quart

Cynoff EC uses a knock down method which last longer then organophosphates to control pest. Once the pest comes in contact with Cynoff EC, it is killed. Cynoff EC is an odorless insecticide concentrate and leaves no residue. Cynoff EC, along with Cynoff WP and Demon WP, belong in the synthetic pyrethroid family, carrying the same active ingredient as Cyper WP and Demon WP. You only need 1/2 to 1 ounce of Cynoff EC per gallon of water, one quart yielding 32-64 gallons.

Fortified by Cypermethrin, Cynoff EC Insecticide delivers quick and powerful cleanout control of cockroaches and other pests. Upon contact or ingestion, the active ingredient instantly paralyzes and kills insects. Commonly used for residual control or direct kill applications, Cynoff can also be used for barrier treatments with exceptional results.

Why Should You Use CYNOFF EC ?

Cynoff EC provides immediate solutions to several infestations. It is a fast-acting contact insecticide that is odorless and long lasting.

* Outdoor use only.

**Not for Indoor use in California

Directions for CYNOFF EC Use

Cynoff EC is a concentrate that must be diluted in water for spray or brushing applications. Fill sprayer tanks half-full before adding the concentrate. Add the remaining volume of water and agitate the tank to ensure a uniform mixture. Depending on the target pest/s, solutions must have 0.1% to 0.2% active ingredient content. This can be made by mixing 1/2 fl. oz. of Cynoff with 1 gallon of water to produce solutions with 0.1% A.I. concentration. Doubling the amount of the concentrate yields solutions with 0.2% A.I. content.

Apply the product as a coarse, low pressure spray to infested areas and potential insect-harboring sites such as basements, attics, behind and under appliances, storage areas, cabinets, shelves, baseboards, under sinks and along plumbing. Pay particular attention to cracks, crevices and voids.

Using hand or power sprayers, apply the product by brush or residual spray to building surfaces, porches, window screens, patios, lawns and other grass areas to control outdoor insects.

For barrier treatments, create a band measuring 6 to 10 feet around structures to protect them from infestations. Apply the product as a coarse spray, at the rate of 1 gallon per 400 square feet. Also treat building foundations and other potential entry points to a height of 3 to 5 feet.

To control cluster flies, mix 1 fluid ounce of Cynoff to 10 fluid ounces of mineral oil. Apply to 1,000 square feet of wall area using fogging equipment.

Where to Apply CYNOFF EC

Cynoff EC is for residual pest control in and on buildings and structures including: industrial buildings, houses, apartment buildings, laboratories, buses, greenhouses, and the nonfood/feed areas of stores, warehouses, vessels, railcars, trucks, trailers, aircraft (Do not use in aircraft cabins), schools, nursing homes, hospitals, restaurants, hotels, and food manufacturing, processing, and servicing establishments.

Cynoff EC Product Label

Cynoff EC Material Safety Data Sheet (MSDS)

CYNOFF EC - 1 Quart

Cynoff EC uses a knock down method which last longer then organophosphates to control pest. Once the pest comes in contact with Cynoff EC, it is killed. Cynoff EC is an odorless insecticide concentrate and leaves no residue. Cynoff EC, along with Cynoff WP and Demon WP, belong in the synthetic pyrethroid family, carrying the same active ingredient as Cyper WP and Demon WP. You only need 1/2 to 1 ounce of Cynoff EC per gallon of water, one quart yielding 32-64 gallons.

Fortified by Cypermethrin, Cynoff EC Insecticide delivers quick and powerful cleanout control of cockroaches and other pests. Upon contact or ingestion, the active ingredient instantly paralyzes and kills insects. Commonly used for residual control or direct kill applications, Cynoff can also be used for barrier treatments with exceptional results.

Why Should You Use CYNOFF EC ?

Cynoff EC provides immediate solutions to several infestations. It is a fast-acting contact insecticide that is odorless and long lasting.

* Outdoor use only.

**Not for Indoor use in California

Directions for CYNOFF EC Use

Cynoff EC is a concentrate that must be diluted in water for spray or brushing applications. Fill sprayer tanks half-full before adding the concentrate. Add the remaining volume of water and agitate the tank to ensure a uniform mixture. Depending on the target pest/s, solutions must have 0.1% to 0.2% active ingredient content. This can be made by mixing 1/2 fl. oz. of Cynoff with 1 gallon of water to produce solutions with 0.1% A.I. concentration. Doubling the amount of the concentrate yields solutions with 0.2% A.I. content.

Apply the product as a coarse, low pressure spray to infested areas and potential insect-harboring sites such as basements, attics, behind and under appliances, storage areas, cabinets, shelves, baseboards, under sinks and along plumbing. Pay particular attention to cracks, crevices and voids.

Using hand or power sprayers, apply the product by brush or residual spray to building surfaces, porches, window screens, patios, lawns and other grass areas to control outdoor insects.

For barrier treatments, create a band measuring 6 to 10 feet around structures to protect them from infestations. Apply the product as a coarse spray, at the rate of 1 gallon per 400 square feet. Also treat building foundations and other potential entry points to a height of 3 to 5 feet.

To control cluster flies, mix 1 fluid ounce of Cynoff to 10 fluid ounces of mineral oil. Apply to 1,000 square feet of wall area using fogging equipment.

Where to Apply CYNOFF EC

Cynoff EC is for residual pest control in and on buildings and structures including: industrial buildings, houses, apartment buildings, laboratories, buses, greenhouses, and the nonfood/feed areas of stores, warehouses, vessels, railcars, trucks, trailers, aircraft (Do not use in aircraft cabins), schools, nursing homes, hospitals, restaurants, hotels, and food manufacturing, processing, and servicing establishments.

Cynoff EC Product Label

Cynoff EC Material Safety Data Sheet (MSDS)

CYNOFF EC - 1 Quart

Cynoff EC uses a knock down method which last longer then organophosphates to control pest. Once the pest comes in contact with Cynoff EC, it is killed. Cynoff EC is an odorless insecticide concentrate and leaves no residue. Cynoff EC, along with Cynoff WP and Demon WP, belong in the synthetic pyrethroid family, carrying the same active ingredient as Cyper WP and Demon WP. You only need 1/2 to 1 ounce of Cynoff EC per gallon of water, one quart yielding 32-64 gallons.

Fortified by Cypermethrin, Cynoff EC Insecticide delivers quick and powerful cleanout control of cockroaches and other pests. Upon contact or ingestion, the active ingredient instantly paralyzes and kills insects. Commonly used for residual control or direct kill applications, Cynoff can also be used for barrier treatments with exceptional results.

Why Should You Use CYNOFF EC ?

Cynoff EC provides immediate solutions to several infestations. It is a fast-acting contact insecticide that is odorless and long lasting.

* Outdoor use only.

**Not for Indoor use in California

Directions for CYNOFF EC Use

Cynoff EC is a concentrate that must be diluted in water for spray or brushing applications. Fill sprayer tanks half-full before adding the concentrate. Add the remaining volume of water and agitate the tank to ensure a uniform mixture. Depending on the target pest/s, solutions must have 0.1% to 0.2% active ingredient content. This can be made by mixing 1/2 fl. oz. of Cynoff with 1 gallon of water to produce solutions with 0.1% A.I. concentration. Doubling the amount of the concentrate yields solutions with 0.2% A.I. content.

Apply the product as a coarse, low pressure spray to infested areas and potential insect-harboring sites such as basements, attics, behind and under appliances, storage areas, cabinets, shelves, baseboards, under sinks and along plumbing. Pay particular attention to cracks, crevices and voids.

Using hand or power sprayers, apply the product by brush or residual spray to building surfaces, porches, window screens, patios, lawns and other grass areas to control outdoor insects.

For barrier treatments, create a band measuring 6 to 10 feet around structures to protect them from infestations. Apply the product as a coarse spray, at the rate of 1 gallon per 400 square feet. Also treat building foundations and other potential entry points to a height of 3 to 5 feet.

To control cluster flies, mix 1 fluid ounce of Cynoff to 10 fluid ounces of mineral oil. Apply to 1,000 square feet of wall area using fogging equipment.

Where to Apply CYNOFF EC

Cynoff EC is for residual pest control in and on buildings and structures including: industrial buildings, houses, apartment buildings, laboratories, buses, greenhouses, and the nonfood/feed areas of stores, warehouses, vessels, railcars, trucks, trailers, aircraft (Do not use in aircraft cabins), schools, nursing homes, hospitals, restaurants, hotels, and food manufacturing, processing, and servicing establishments.

Cynoff EC Product Label

Cynoff EC Material Safety Data Sheet (MSDS)

CYNOFF EC - 1 Quart

Cynoff EC uses a knock down method which last longer then organophosphates to control pest. Once the pest comes in contact with Cynoff EC, it is killed. Cynoff EC is an odorless insecticide concentrate and leaves no residue. Cynoff EC, along with Cynoff WP and Demon WP, belong in the synthetic pyrethroid family, carrying the same active ingredient as Cyper WP and Demon WP. You only need 1/2 to 1 ounce of Cynoff EC per gallon of water, one quart yielding 32-64 gallons.

Fortified by Cypermethrin, Cynoff EC Insecticide delivers quick and powerful cleanout control of cockroaches and other pests. Upon contact or ingestion, the active ingredient instantly paralyzes and kills insects. Commonly used for residual control or direct kill applications, Cynoff can also be used for barrier treatments with exceptional results.

Why Should You Use CYNOFF EC ?

Cynoff EC provides immediate solutions to several infestations. It is a fast-acting contact insecticide that is odorless and long lasting.

* Outdoor use only.

**Not for Indoor use in California

Directions for CYNOFF EC Use

Cynoff EC is a concentrate that must be diluted in water for spray or brushing applications. Fill sprayer tanks half-full before adding the concentrate. Add the remaining volume of water and agitate the tank to ensure a uniform mixture. Depending on the target pest/s, solutions must have 0.1% to 0.2% active ingredient content. This can be made by mixing 1/2 fl. oz. of Cynoff with 1 gallon of water to produce solutions with 0.1% A.I. concentration. Doubling the amount of the concentrate yields solutions with 0.2% A.I. content.

Apply the product as a coarse, low pressure spray to infested areas and potential insect-harboring sites such as basements, attics, behind and under appliances, storage areas, cabinets, shelves, baseboards, under sinks and along plumbing. Pay particular attention to cracks, crevices and voids.

Using hand or power sprayers, apply the product by brush or residual spray to building surfaces, porches, window screens, patios, lawns and other grass areas to control outdoor insects.

For barrier treatments, create a band measuring 6 to 10 feet around structures to protect them from infestations. Apply the product as a coarse spray, at the rate of 1 gallon per 400 square feet. Also treat building foundations and other potential entry points to a height of 3 to 5 feet.

To control cluster flies, mix 1 fluid ounce of Cynoff to 10 fluid ounces of mineral oil. Apply to 1,000 square feet of wall area using fogging equipment.

Where to Apply CYNOFF EC

Cynoff EC is for residual pest control in and on buildings and structures including: industrial buildings, houses, apartment buildings, laboratories, buses, greenhouses, and the nonfood/feed areas of stores, warehouses, vessels, railcars, trucks, trailers, aircraft (Do not use in aircraft cabins), schools, nursing homes, hospitals, restaurants, hotels, and food manufacturing, processing, and servicing establishments.

Cynoff EC Product Label

Cynoff EC Material Safety Data Sheet (MSDS)

CYNOFF EC - 1 Quart

Cynoff EC uses a knock down method which last longer then organophosphates to control pest. Once the pest comes in contact with Cynoff EC, it is killed. Cynoff EC is an odorless insecticide concentrate and leaves no residue. Cynoff EC, along with Cynoff WP and Demon WP, belong in the synthetic pyrethroid family, carrying the same active ingredient as Cyper WP and Demon WP. You only need 1/2 to 1 ounce of Cynoff EC per gallon of water, one quart yielding 32-64 gallons.

Fortified by Cypermethrin, Cynoff EC Insecticide delivers quick and powerful cleanout control of cockroaches and other pests. Upon contact or ingestion, the active ingredient instantly paralyzes and kills insects. Commonly used for residual control or direct kill applications, Cynoff can also be used for barrier treatments with exceptional results.

Why Should You Use CYNOFF EC ?

Cynoff EC provides immediate solutions to several infestations. It is a fast-acting contact insecticide that is odorless and long lasting.

* Outdoor use only.

**Not for Indoor use in California

Directions for CYNOFF EC Use

Cynoff EC is a concentrate that must be diluted in water for spray or brushing applications. Fill sprayer tanks half-full before adding the concentrate. Add the remaining volume of water and agitate the tank to ensure a uniform mixture. Depending on the target pest/s, solutions must have 0.1% to 0.2% active ingredient content. This can be made by mixing 1/2 fl. oz. of Cynoff with 1 gallon of water to produce solutions with 0.1% A.I. concentration. Doubling the amount of the concentrate yields solutions with 0.2% A.I. content.

Apply the product as a coarse, low pressure spray to infested areas and potential insect-harboring sites such as basements, attics, behind and under appliances, storage areas, cabinets, shelves, baseboards, under sinks and along plumbing. Pay particular attention to cracks, crevices and voids.

Using hand or power sprayers, apply the product by brush or residual spray to building surfaces, porches, window screens, patios, lawns and other grass areas to control outdoor insects.

For barrier treatments, create a band measuring 6 to 10 feet around structures to protect them from infestations. Apply the product as a coarse spray, at the rate of 1 gallon per 400 square feet. Also treat building foundations and other potential entry points to a height of 3 to 5 feet.

To control cluster flies, mix 1 fluid ounce of Cynoff to 10 fluid ounces of mineral oil. Apply to 1,000 square feet of wall area using fogging equipment.

Where to Apply CYNOFF EC

Cynoff EC is for residual pest control in and on buildings and structures including: industrial buildings, houses, apartment buildings, laboratories, buses, greenhouses, and the nonfood/feed areas of stores, warehouses, vessels, railcars, trucks, trailers, aircraft (Do not use in aircraft cabins), schools, nursing homes, hospitals, restaurants, hotels, and food manufacturing, processing, and servicing establishments.

Cynoff EC Product Label

Cynoff EC Material Safety Data Sheet (MSDS)

CYNOFF EC - 1 Quart

Cynoff EC uses a knock down method which last longer then organophosphates to control pest. Once the pest comes in contact with Cynoff EC, it is killed. Cynoff EC is an odorless insecticide concentrate and leaves no residue. Cynoff EC, along with Cynoff WP and Demon WP, belong in the synthetic pyrethroid family, carrying the same active ingredient as Cyper WP and Demon WP. You only need 1/2 to 1 ounce of Cynoff EC per gallon of water, one quart yielding 32-64 gallons.

Fortified by Cypermethrin, Cynoff EC Insecticide delivers quick and powerful cleanout control of cockroaches and other pests. Upon contact or ingestion, the active ingredient instantly paralyzes and kills insects. Commonly used for residual control or direct kill applications, Cynoff can also be used for barrier treatments with exceptional results.

Why Should You Use CYNOFF EC ?

Cynoff EC provides immediate solutions to several infestations. It is a fast-acting contact insecticide that is odorless and long lasting.

* Outdoor use only.

**Not for Indoor use in California

Directions for CYNOFF EC Use

Cynoff EC is a concentrate that must be diluted in water for spray or brushing applications. Fill sprayer tanks half-full before adding the concentrate. Add the remaining volume of water and agitate the tank to ensure a uniform mixture. Depending on the target pest/s, solutions must have 0.1% to 0.2% active ingredient content. This can be made by mixing 1/2 fl. oz. of Cynoff with 1 gallon of water to produce solutions with 0.1% A.I. concentration. Doubling the amount of the concentrate yields solutions with 0.2% A.I. content.

Apply the product as a coarse, low pressure spray to infested areas and potential insect-harboring sites such as basements, attics, behind and under appliances, storage areas, cabinets, shelves, baseboards, under sinks and along plumbing. Pay particular attention to cracks, crevices and voids.

Using hand or power sprayers, apply the product by brush or residual spray to building surfaces, porches, window screens, patios, lawns and other grass areas to control outdoor insects.

For barrier treatments, create a band measuring 6 to 10 feet around structures to protect them from infestations. Apply the product as a coarse spray, at the rate of 1 gallon per 400 square feet. Also treat building foundations and other potential entry points to a height of 3 to 5 feet.

To control cluster flies, mix 1 fluid ounce of Cynoff to 10 fluid ounces of mineral oil. Apply to 1,000 square feet of wall area using fogging equipment.

Where to Apply CYNOFF EC

Cynoff EC is for residual pest control in and on buildings and structures including: industrial buildings, houses, apartment buildings, laboratories, buses, greenhouses, and the nonfood/feed areas of stores, warehouses, vessels, railcars, trucks, trailers, aircraft (Do not use in aircraft cabins), schools, nursing homes, hospitals, restaurants, hotels, and food manufacturing, processing, and servicing establishments.

Cynoff EC Product Label

Cynoff EC Material Safety Data Sheet (MSDS)

CYNOFF EC - 1 Quart

Cynoff EC uses a knock down method which last longer then organophosphates to control pest. Once the pest comes in contact with Cynoff EC, it is killed. Cynoff EC is an odorless insecticide concentrate and leaves no residue. Cynoff EC, along with Cynoff WP and Demon WP, belong in the synthetic pyrethroid family, carrying the same active ingredient as Cyper WP and Demon WP. You only need 1/2 to 1 ounce of Cynoff EC per gallon of water, one quart yielding 32-64 gallons.

Fortified by Cypermethrin, Cynoff EC Insecticide delivers quick and powerful cleanout control of cockroaches and other pests. Upon contact or ingestion, the active ingredient instantly paralyzes and kills insects. Commonly used for residual control or direct kill applications, Cynoff can also be used for barrier treatments with exceptional results.

Why Should You Use CYNOFF EC ?

Cynoff EC provides immediate solutions to several infestations. It is a fast-acting contact insecticide that is odorless and long lasting.

* Outdoor use only.

**Not for Indoor use in California

Directions for CYNOFF EC Use

Cynoff EC is a concentrate that must be diluted in water for spray or brushing applications. Fill sprayer tanks half-full before adding the concentrate. Add the remaining volume of water and agitate the tank to ensure a uniform mixture. Depending on the target pest/s, solutions must have 0.1% to 0.2% active ingredient content. This can be made by mixing 1/2 fl. oz. of Cynoff with 1 gallon of water to produce solutions with 0.1% A.I. concentration. Doubling the amount of the concentrate yields solutions with 0.2% A.I. content.

Apply the product as a coarse, low pressure spray to infested areas and potential insect-harboring sites such as basements, attics, behind and under appliances, storage areas, cabinets, shelves, baseboards, under sinks and along plumbing. Pay particular attention to cracks, crevices and voids.

Using hand or power sprayers, apply the product by brush or residual spray to building surfaces, porches, window screens, patios, lawns and other grass areas to control outdoor insects.

For barrier treatments, create a band measuring 6 to 10 feet around structures to protect them from infestations. Apply the product as a coarse spray, at the rate of 1 gallon per 400 square feet. Also treat building foundations and other potential entry points to a height of 3 to 5 feet.

To control cluster flies, mix 1 fluid ounce of Cynoff to 10 fluid ounces of mineral oil. Apply to 1,000 square feet of wall area using fogging equipment.

Where to Apply CYNOFF EC

Cynoff EC is for residual pest control in and on buildings and structures including: industrial buildings, houses, apartment buildings, laboratories, buses, greenhouses, and the nonfood/feed areas of stores, warehouses, vessels, railcars, trucks, trailers, aircraft (Do not use in aircraft cabins), schools, nursing homes, hospitals, restaurants, hotels, and food manufacturing, processing, and servicing establishments.

Cynoff WP Product Label

Cynoff WP Material Safety Data Sheet (MSDS)

Cynoff WP - 1 lb.

The power of Cypermethrin is now available in powder form with FMC's Cynoff WP. Excellent for broadcast, perimeter, and crack and crevice treatments, Cynoff delivers superior residual and contact kill to common pests. Cynoff WP has an active ingredient content of 40%, nearly doubling that of Cynoff EC. WP is a cost-effective insecticide that can yield up to 48 gallons of solution at the cost less than its competitors.

Why Should You Use CYNOFF WP?

Cynoff cost less but performs better than other insecticide brands.

Directions for CYNOFF WP Use

Cynoff WP must be diluted in water for spray or brushing applications. The product comes with a plastic scoop with 0.33 oz. capacity. Use a full scoop of Cynoff WP per gallon of water to yield a solution having 0.1% of the active ingredient. Doubling the amount of the concentrate yields solutions with 0.2% active ingredient content. Depending on the target pest/s, solutions must have 0.1% to 0.2% active ingredient content.

Apply the product as a coarse, low pressure spray to infested areas and potential insect-harboring sites such as basements, attics, behind and under appliances, storage areas, cabinets, shelves, baseboards, under sinks and along plumbing. Pay particular attention to cracks, crevices and voids.

Using hand or power sprayers, apply the product by brush or residual spray to building surfaces, porches, window screens, patios, lawns and other grass areas to control outdoor insects.

For barrier treatments, create a band measuring 6 to 10 feet around structures to protect them from infestations. Apply the product as a coarse spray, at the rate of 1 gallon per 400 square feet. Also treat building foundations and other potential entry points to a height of 3 to 5 feet.

Where to Apply CYNOFF WP

Cynoff WP is for residual pest control in and on buildings and structures including: industrial buildings, houses, apartment buildings, laboratories, buses, greenhouses, and the nonfood/feed areas of stores, warehouses, vessels, railcars, trucks, trailers, aircraft (Do not use in aircraft cabins), schools, nursing homes, hospitals, restaurants, hotels, and food manufacturing, processing, and servicing establishments.

Cynoff WP Product Label

Cynoff WP Material Safety Data Sheet (MSDS)

Cynoff WP - 1 lb.

The power of Cypermethrin is now available in powder form with FMC's Cynoff WP. Excellent for broadcast, perimeter, and crack and crevice treatments, Cynoff delivers superior residual and contact kill to common pests. Cynoff WP has an active ingredient content of 40%, nearly doubling that of Cynoff EC. WP is a cost-effective insecticide that can yield up to 48 gallons of solution at the cost less than its competitors.

Why Should You Use CYNOFF WP?

Cynoff cost less but performs better than other insecticide brands.

Directions for CYNOFF WP Use

Cynoff WP must be diluted in water for spray or brushing applications. The product comes with a plastic scoop with 0.33 oz. capacity. Use a full scoop of Cynoff WP per gallon of water to yield a solution having 0.1% of the active ingredient. Doubling the amount of the concentrate yields solutions with 0.2% active ingredient content. Depending on the target pest/s, solutions must have 0.1% to 0.2% active ingredient content.

Apply the product as a coarse, low pressure spray to infested areas and potential insect-harboring sites such as basements, attics, behind and under appliances, storage areas, cabinets, shelves, baseboards, under sinks and along plumbing. Pay particular attention to cracks, crevices and voids.

Using hand or power sprayers, apply the product by brush or residual spray to building surfaces, porches, window screens, patios, lawns and other grass areas to control outdoor insects.

For barrier treatments, create a band measuring 6 to 10 feet around structures to protect them from infestations. Apply the product as a coarse spray, at the rate of 1 gallon per 400 square feet. Also treat building foundations and other potential entry points to a height of 3 to 5 feet.

Where to Apply CYNOFF WP

Cynoff WP is for residual pest control in and on buildings and structures including: industrial buildings, houses, apartment buildings, laboratories, buses, greenhouses, and the nonfood/feed areas of stores, warehouses, vessels, railcars, trucks, trailers, aircraft (Do not use in aircraft cabins), schools, nursing homes, hospitals, restaurants, hotels, and food manufacturing, processing, and servicing establishments.

Cynoff WP Product Label

Cynoff WP Material Safety Data Sheet (MSDS)

Cynoff WP - 1 lb.

The power of Cypermethrin is now available in powder form with FMC's Cynoff WP. Excellent for broadcast, perimeter, and crack and crevice treatments, Cynoff delivers superior residual and contact kill to common pests. Cynoff WP has an active ingredient content of 40%, nearly doubling that of Cynoff EC. WP is a cost-effective insecticide that can yield up to 48 gallons of solution at the cost less than its competitors.

Why Should You Use CYNOFF WP?

Cynoff cost less but performs better than other insecticide brands.

Directions for CYNOFF WP Use

Cynoff WP must be diluted in water for spray or brushing applications. The product comes with a plastic scoop with 0.33 oz. capacity. Use a full scoop of Cynoff WP per gallon of water to yield a solution having 0.1% of the active ingredient. Doubling the amount of the concentrate yields solutions with 0.2% active ingredient content. Depending on the target pest/s, solutions must have 0.1% to 0.2% active ingredient content.

Apply the product as a coarse, low pressure spray to infested areas and potential insect-harboring sites such as basements, attics, behind and under appliances, storage areas, cabinets, shelves, baseboards, under sinks and along plumbing. Pay particular attention to cracks, crevices and voids.

Using hand or power sprayers, apply the product by brush or residual spray to building surfaces, porches, window screens, patios, lawns and other grass areas to control outdoor insects.

For barrier treatments, create a band measuring 6 to 10 feet around structures to protect them from infestations. Apply the product as a coarse spray, at the rate of 1 gallon per 400 square feet. Also treat building foundations and other potential entry points to a height of 3 to 5 feet.

Where to Apply CYNOFF WP

Cynoff WP is for residual pest control in and on buildings and structures including: industrial buildings, houses, apartment buildings, laboratories, buses, greenhouses, and the nonfood/feed areas of stores, warehouses, vessels, railcars, trucks, trailers, aircraft (Do not use in aircraft cabins), schools, nursing homes, hospitals, restaurants, hotels, and food manufacturing, processing, and servicing establishments.

Cynoff WP Product Label

Cynoff WP Material Safety Data Sheet (MSDS)

Cynoff WP - 1 lb.

The power of Cypermethrin is now available in powder form with FMC's Cynoff WP. Excellent for broadcast, perimeter, and crack and crevice treatments, Cynoff delivers superior residual and contact kill to common pests. Cynoff WP has an active ingredient content of 40%, nearly doubling that of Cynoff EC. WP is a cost-effective insecticide that can yield up to 48 gallons of solution at the cost less than its competitors.

Why Should You Use CYNOFF WP?

Cynoff cost less but performs better than other insecticide brands.

Directions for CYNOFF WP Use

Cynoff WP must be diluted in water for spray or brushing applications. The product comes with a plastic scoop with 0.33 oz. capacity. Use a full scoop of Cynoff WP per gallon of water to yield a solution having 0.1% of the active ingredient. Doubling the amount of the concentrate yields solutions with 0.2% active ingredient content. Depending on the target pest/s, solutions must have 0.1% to 0.2% active ingredient content.

Apply the product as a coarse, low pressure spray to infested areas and potential insect-harboring sites such as basements, attics, behind and under appliances, storage areas, cabinets, shelves, baseboards, under sinks and along plumbing. Pay particular attention to cracks, crevices and voids.

Using hand or power sprayers, apply the product by brush or residual spray to building surfaces, porches, window screens, patios, lawns and other grass areas to control outdoor insects.

For barrier treatments, create a band measuring 6 to 10 feet around structures to protect them from infestations. Apply the product as a coarse spray, at the rate of 1 gallon per 400 square feet. Also treat building foundations and other potential entry points to a height of 3 to 5 feet.

Where to Apply CYNOFF WP

Cynoff WP is for residual pest control in and on buildings and structures including: industrial buildings, houses, apartment buildings, laboratories, buses, greenhouses, and the nonfood/feed areas of stores, warehouses, vessels, railcars, trucks, trailers, aircraft (Do not use in aircraft cabins), schools, nursing homes, hospitals, restaurants, hotels, and food manufacturing, processing, and servicing establishments.

Cynoff WP Product Label

Cynoff WP Material Safety Data Sheet (MSDS)

Cynoff WP - 1 lb.

The power of Cypermethrin is now available in powder form with FMC's Cynoff WP. Excellent for broadcast, perimeter, and crack and crevice treatments, Cynoff delivers superior residual and contact kill to common pests. Cynoff WP has an active ingredient content of 40%, nearly doubling that of Cynoff EC. WP is a cost-effective insecticide that can yield up to 48 gallons of solution at the cost less than its competitors.

Why Should You Use CYNOFF WP?

Cynoff cost less but performs better than other insecticide brands.

Directions for CYNOFF WP Use

Cynoff WP must be diluted in water for spray or brushing applications. The product comes with a plastic scoop with 0.33 oz. capacity. Use a full scoop of Cynoff WP per gallon of water to yield a solution having 0.1% of the active ingredient. Doubling the amount of the concentrate yields solutions with 0.2% active ingredient content. Depending on the target pest/s, solutions must have 0.1% to 0.2% active ingredient content.

Apply the product as a coarse, low pressure spray to infested areas and potential insect-harboring sites such as basements, attics, behind and under appliances, storage areas, cabinets, shelves, baseboards, under sinks and along plumbing. Pay particular attention to cracks, crevices and voids.

Using hand or power sprayers, apply the product by brush or residual spray to building surfaces, porches, window screens, patios, lawns and other grass areas to control outdoor insects.

For barrier treatments, create a band measuring 6 to 10 feet around structures to protect them from infestations. Apply the product as a coarse spray, at the rate of 1 gallon per 400 square feet. Also treat building foundations and other potential entry points to a height of 3 to 5 feet.

Where to Apply CYNOFF WP

Cynoff WP is for residual pest control in and on buildings and structures including: industrial buildings, houses, apartment buildings, laboratories, buses, greenhouses, and the nonfood/feed areas of stores, warehouses, vessels, railcars, trucks, trailers, aircraft (Do not use in aircraft cabins), schools, nursing homes, hospitals, restaurants, hotels, and food manufacturing, processing, and servicing establishments.

Cynoff WP Product Label

Cynoff WP Material Safety Data Sheet (MSDS)

Cynoff WP - 1 lb.

The power of Cypermethrin is now available in powder form with FMC's Cynoff WP. Excellent for broadcast, perimeter, and crack and crevice treatments, Cynoff delivers superior residual and contact kill to common pests. Cynoff WP has an active ingredient content of 40%, nearly doubling that of Cynoff EC. WP is a cost-effective insecticide that can yield up to 48 gallons of solution at the cost less than its competitors.

Why Should You Use CYNOFF WP?

Cynoff cost less but performs better than other insecticide brands.

Directions for CYNOFF WP Use

Cynoff WP must be diluted in water for spray or brushing applications. The product comes with a plastic scoop with 0.33 oz. capacity. Use a full scoop of Cynoff WP per gallon of water to yield a solution having 0.1% of the active ingredient. Doubling the amount of the concentrate yields solutions with 0.2% active ingredient content. Depending on the target pest/s, solutions must have 0.1% to 0.2% active ingredient content.

Apply the product as a coarse, low pressure spray to infested areas and potential insect-harboring sites such as basements, attics, behind and under appliances, storage areas, cabinets, shelves, baseboards, under sinks and along plumbing. Pay particular attention to cracks, crevices and voids.

Using hand or power sprayers, apply the product by brush or residual spray to building surfaces, porches, window screens, patios, lawns and other grass areas to control outdoor insects.

For barrier treatments, create a band measuring 6 to 10 feet around structures to protect them from infestations. Apply the product as a coarse spray, at the rate of 1 gallon per 400 square feet. Also treat building foundations and other potential entry points to a height of 3 to 5 feet.

Where to Apply CYNOFF WP

Cynoff WP is for residual pest control in and on buildings and structures including: industrial buildings, houses, apartment buildings, laboratories, buses, greenhouses, and the nonfood/feed areas of stores, warehouses, vessels, railcars, trucks, trailers, aircraft (Do not use in aircraft cabins), schools, nursing homes, hospitals, restaurants, hotels, and food manufacturing, processing, and servicing establishments.

Cynoff WP Product Label

Cynoff WP Material Safety Data Sheet (MSDS)

Cynoff WP - 1 lb.

The power of Cypermethrin is now available in powder form with FMC's Cynoff WP. Excellent for broadcast, perimeter, and crack and crevice treatments, Cynoff delivers superior residual and contact kill to common pests. Cynoff WP has an active ingredient content of 40%, nearly doubling that of Cynoff EC. WP is a cost-effective insecticide that can yield up to 48 gallons of solution at the cost less than its competitors.

Why Should You Use CYNOFF WP?

Cynoff cost less but performs better than other insecticide brands.

Directions for CYNOFF WP Use

Cynoff WP must be diluted in water for spray or brushing applications. The product comes with a plastic scoop with 0.33 oz. capacity. Use a full scoop of Cynoff WP per gallon of water to yield a solution having 0.1% of the active ingredient. Doubling the amount of the concentrate yields solutions with 0.2% active ingredient content. Depending on the target pest/s, solutions must have 0.1% to 0.2% active ingredient content.

Apply the product as a coarse, low pressure spray to infested areas and potential insect-harboring sites such as basements, attics, behind and under appliances, storage areas, cabinets, shelves, baseboards, under sinks and along plumbing. Pay particular attention to cracks, crevices and voids.

Using hand or power sprayers, apply the product by brush or residual spray to building surfaces, porches, window screens, patios, lawns and other grass areas to control outdoor insects.

For barrier treatments, create a band measuring 6 to 10 feet around structures to protect them from infestations. Apply the product as a coarse spray, at the rate of 1 gallon per 400 square feet. Also treat building foundations and other potential entry points to a height of 3 to 5 feet.

Where to Apply CYNOFF WP

Cynoff WP is for residual pest control in and on buildings and structures including: industrial buildings, houses, apartment buildings, laboratories, buses, greenhouses, and the nonfood/feed areas of stores, warehouses, vessels, railcars, trucks, trailers, aircraft (Do not use in aircraft cabins), schools, nursing homes, hospitals, restaurants, hotels, and food manufacturing, processing, and servicing establishments.

Cynoff WP Product Label

Cynoff WP Material Safety Data Sheet (MSDS)

Cynoff WP - 1 lb.

The power of Cypermethrin is now available in powder form with FMC's Cynoff WP. Excellent for broadcast, perimeter, and crack and crevice treatments, Cynoff delivers superior residual and contact kill to common pests. Cynoff WP has an active ingredient content of 40%, nearly doubling that of Cynoff EC. WP is a cost-effective insecticide that can yield up to 48 gallons of solution at the cost less than its competitors.

Why Should You Use CYNOFF WP?

Cynoff cost less but performs better than other insecticide brands.

Directions for CYNOFF WP Use

Cynoff WP must be diluted in water for spray or brushing applications. The product comes with a plastic scoop with 0.33 oz. capacity. Use a full scoop of Cynoff WP per gallon of water to yield a solution having 0.1% of the active ingredient. Doubling the amount of the concentrate yields solutions with 0.2% active ingredient content. Depending on the target pest/s, solutions must have 0.1% to 0.2% active ingredient content.

Apply the product as a coarse, low pressure spray to infested areas and potential insect-harboring sites such as basements, attics, behind and under appliances, storage areas, cabinets, shelves, baseboards, under sinks and along plumbing. Pay particular attention to cracks, crevices and voids.

Using hand or power sprayers, apply the product by brush or residual spray to building surfaces, porches, window screens, patios, lawns and other grass areas to control outdoor insects.

For barrier treatments, create a band measuring 6 to 10 feet around structures to protect them from infestations. Apply the product as a coarse spray, at the rate of 1 gallon per 400 square feet. Also treat building foundations and other potential entry points to a height of 3 to 5 feet.

Where to Apply CYNOFF WP

Cynoff WP is for residual pest control in and on buildings and structures including: industrial buildings, houses, apartment buildings, laboratories, buses, greenhouses, and the nonfood/feed areas of stores, warehouses, vessels, railcars, trucks, trailers, aircraft (Do not use in aircraft cabins), schools, nursing homes, hospitals, restaurants, hotels, and food manufacturing, processing, and servicing establishments.

Cyonara LP Product Label

Cyonara LP Material Safety Data Sheet (MSDS)

Cyonara LP Supplemental Label

Cyonara L/P Granules - 25 lbs.

Cyonara LP is a lawn and perimeter insect control granule. Cyonara LP contains .04% Lambda-Cyhalothrin in a resealable bag. One 25 pound bag will treat up to 12,500 sq.ft. Cyonara LP is labeled for control of ants, fleas, ticks, chinch bugs, and many other nuisance pests, making it one of the best repellent granules on the market.

Useful Tips You May Need to Know

In case the yard or soil is dry, water the area lightly before application to increase effectiveness and working speed.

Delta Dust Product Labe

Delta Dust Material Safety Data Sheet (MSDS)

How to Apply Dust Insecticide

Delta Dust - 1 lb.

Bayer's Delta Dust is a waterproof insecticide in powder form. Unlike other dusts and residuals, Delta Dust stays dry and active even when applied in areas with high humidity and moisture. Pests prefer damp places such as under sinks and along plumbing and Delta Dust is the perfect control product to use. Fast acting and long lasting, this contact insecticide kills pests upon contact remains active for up to 8 months! Low active ingredient concentration makes the product safe for use even in food handling areas.

Please read the product label for application instructions and the recommended application rates. Pestmall offers Centrobulb Dusters and Bellow Dusters needed to apply Delta Dust Insecticides.

Why Should You Use Delta Dust?

Unlike other dust insecticides, Delta Dust stays dry and effective and remains so for eight long months.