PT 565 XLO Product Label

PT 565 XLO Material Safety Data Sheet (MSDS)

565 Plus XLO Contact Insecticide Pest Control 20oz Can

Whitmire Micro-Gen's 565 Plus XLO Contact Insecticide Pest Control is the perfect insect control solution. The insecticide contains the botanical insecticide Pyrethrin, an organic compound with potent insecticidal properties.

Why Should You Use 565 Plus XLO Contact Insecticide Pest Control?

565 Plus XLO covers an extensive range of bugs and a 20 oz. aerosol can cover approximately 1500 square feet of space.

Directions for 565 Plus XLO Contact Insecticide Pest Control 20oz Can Use

565 Plus XLO can be used for direct contact kills or space treatments. The product can be used indoors or outdoors to treat areas infested by insects.

Where to Apply 565 Plus XLO Contact Insecticide Pest Control 20oz Can

Apply 565 Plus XLO in apartments, homes, campgrounds, hotels, storage areas, schools, transports, supermarkets, commercial buildings and industrial buildings.

Indoor Applications

For space treatments, first calculate the size of the space to be treated. Turn off air conditioners and close all windows and doors and spray the enclosed area by directing the insecticide mist upwards. Spray at the rate of 1 to 3 seconds per 1000 cu. ft. of enclosed space and keep the area closed for at least 15 minutes for maximum effectiveness. Before reoccupying, ventilate the treated area.

For direct contact applications, place the injector tip at the can nozzle and spray on cracks and crevices frequented by insects. Spray at rates depending on applications. Spray additional amounts if necessary or when the infestation seems heavy. Please consult the Material Safety Data Sheet for the specifics.

Outdoor Applications

For outdoor treatments, spray only at wind speeds below 6 miles per hour. Repeat if necessary. Spray directly into mud dauber and wasp nests by holding the container 18" away.

Alpine Foam Product Label

Alpine Foam Material Safety Data Sheet (MSDS)

Alpine Ant and Termite Foam - 20 oz

Alpine Ant and Termite Foam is a powerful insecticide used in residual applications on residential and commercial buildings. The foam formulation contains the potent insecticide Dinotefuran, a neonecotinoid insecticide proven to control a wide range of pest insects including ants and termites. When applied, the foam solution rapidly expands, clogging ant and termite tunnels. Aside from limiting insect movements, the foam is an effective contact insecticide.

BASF-approved foam partner for Termidor termiticide / insecticide has arrived. New Alpine ant and termite foam won't compromise your Termidor treatment zone or your customers' desire for the best pest control available. Alpine formulations contain the active ingredient dinotefuran, a new non-repellent to the pest control industry that the EPA has granted reduced-risk status for public health use.

Why Should You Use Alpine Ant and Termite Foam?

Alpine Ant and Termite Foam is effective in controlling ants and termites. 1 ounce of Alpine Ant and Termite Foam solution yields a quart of foam.

Quick control of isolated subterranean and drywood termite infestations.

Highly effective on ants known for interior infestation (such as Argentine, ghost, pharaoh, and white footed ) as well as foraging carpenter ants.

Dry foam solution (25:1) allows for quick delivery into voids and other immediate-need interior/outdoor areas.

Easy-to-use hose-and-delivery tip.

Great sales closer: Handle termite infestations (especially swarmers) immediately and pacify homeowners fears until the day of Termidor treatment

Directions for Alpine Ant and Termite Foam

Shake well before using the product. Dispense the product using the supplied injector. Point the injector tip towards the treatment area and release the actuator. Treat infested areas by dispensing the product directly on to insect nests, congregation sites, feeding areas and galleries. Apply the product on to structural elements prone to infestation such as foundations and walls. The use of detection devices to trace insect movements inside wooden elements is encouraged to effectively dispense the product. Holes may be drilled on to concrete slabs or infested/damaged wooden elements to dispense the product into insect galleries/tunnels.

Where to Apply Alpine Ant and Termite Foam

Apply the product in and around apartments, homes, homes, restaurants, greenhouses, office buildings, schools, warehouses, commercial buildings and industrial buildings.

TREATMENT OF INSECT GALLERY OR HARBORAGE: Use adequate foam to treat the known or suspected insect harborage.

CRACK & CREVICE TREATMENT: Adequately treat the area by filling the crack and crevice at or near point of infestation.

SPOT TREATMENT: For exposed surfaces, make a spot treatment by wetting the surface area not to exceed 2 sq.ft. for each spot of application. Allow foam to dissipate or wipe surface dry before leaving site.

Alpine Pressurized Insecticide Product Label

Alpine Pressurized Insecticide Material Safety Data Sheet (MSDS)

Alpine Pressurized Insecticide Spray - 20 oz

Developed by Whitmire-Micro Gen Laboratories, the Alpine line of pest control products contain Dinotefuran. The Alpine Insecticide Spray is unusually effective for it contains high concentrations of the potent insecticide. In atomized form, the pesticide provides a quick killing action against pests. Alpine Pressurized insecticide spray is a must-have for homes for quick and effective control of common pest insects.

Why Should You Use?

Alpine Insecticide Spray is safe to use in and around residential spaces and has been granted by the EPA a Reduced Risk status.

Directions for Use

Shake well the Alpine Insecticide aerosol can before applications. Alpine Insecticide Spray can be used for direct contact kills, crack and crevice treatments, spot treatments and space treatments. The product is ideal for use indoors or outdoors to treat infested sites, nests and areas harboring insects. Hold the product upright and direct the nozzle 12 inches away from insects/surfaces to be treated. For direct contact applications, direct the nozzle towards insects and away from persons. When treating surfaces, Treat infFor crack and crevice treatments, use the supplied actuator to apply the product inside to voids, cracks, crevices holes and other insect-harboring sites. Please read the product label for application instructions and safety precautions. Use the product as directed in the product label. Do NOT apply the product to food-handling surfaces.

Where to Apply

Alpine Pressurized Insecticide spray is for use in and around apartments, campgrounds, homes, hospitals, hotels, nursing homes, resorts, schools, warehouses, commercial buildings and industrial buildings.

CB D-FOAM Product Label

CB D-FOAM Material Safety Data Sheet (MSDS)

CB D-Foam - 17 oz. can

Waterbury's CB line of residuals now includes a ready-to-use contact insecticide in a foam solution. With a high expansion rate, CB D-Foam fills voids rapidly to control insects in hard to reach areas. The product targets a broad range of pest insects including termites, ants, bees, beetles and cockroaches. CB D-Foam offers long lasting residual control that lasts for up to 8 weeks! CB D-Foam contains Deltamethrin, a synthetic pyrethroid insecticide widely used due to its effectiveness and its low toxicity to mammals.

Why Should You Use CB D-Foam ?

CB D-Foam is unrivaled in contact kill and residual control efficiency. Once applied the product continues to kill pests for 2 months, greatly reducing control costs.

Directions for CB D-Foam Use

Shake well before using. Hold container upright and direct the nozzle towards the treatment area. For crack and crevice treatments, remove the nozzle cap from the container and install the supplied actuator. Replace the protective cap. Aim the nozzle towards the treatment area, press the button and apply the product as directed in the product label.

CB D-Foam is suitable for surface applications, crack and crevice applications, spot treatments and wall void applications. To control subterranean termites in above-ground areas of structures, first locate galleries, voids and tunnels in wooden structural components using available location techniques. It is sometimes necessary to drill holes in order to access and inject foam into insect galleries. Apply the product to voids/areas where insects frequent, breed, and hide.

Where to Apply CB D-Foam

CB D-Foam is for use in and around: Homes, Apartments, Hospitals, Hotels, Food Handling Establishments, Restaurants, Food Processing Plants, Industrial Buildings, Storage Areas, Warehouses, and Transport Vehicles.

CB-80 Extra Product Label

CB-80 Extra Material Safety Data Sheet (MSDS)

CB-80 Extra aerosol - 17 oz.

CB-80 Extra is today's best-selling contact-kill insecticide used by all the pro's in the industry. CB-80 provides extra-fast knockdown and elimination of most common pests. The ingredients in CB-80 Extra are safe enough to be used in food handling establishments, such as restaurants, supermarkets, and farms as well as residential and commercial establishments.

Why Should You Use CB-80 EXTRA?

CB-80 EXTRA is unparrallelled in proving fast knockdown to a number of household pests including flies, mosquitoes, cockroaches. Excellent for use as a space spray, CB-80 contains no harmful chemicals and is safe to use in food storage areas to treat pantry pests. Licensed by the USDA for use in Federally Inspected Meat and Poultry Plants, the product can also be used to treat animals and animal facilities

Directions for CB-80 EXTRA Use

CB-80 can be used as an indoor surface/contact spray, space spray or as a crack and crevice spray. When using the product to treat spaces, first calculate the size of the space to be treated and spray at rates recommended in the product label. For crack and crevice treatments, calculate the volume of the void and treat using the supplied crack and crevice nozzle. Spray towards areas where insects frequent, hide and congregate. Treated areas/spaces must be ventilated before reoccupying.

FOR CONTROL OF FLYING INSECTS SUCH AS FLIES, GNATS, MOSQUITOES, MOTHS AND WASPS - Calculate the volume of the space to be treated and apply at the rate of 2 to 3 seconds per 1,000 cubic feet.

FOR CRAWLING INSECTS SUCH AS COCKROACHES, ANTS AND SPIDERS -Before applications, turn off air conditioners and close all doors and windows. Treat hiding spaces such as cabinets, under sinks, cracks and crevices, behind appliances, along plumbing, baseboards and floors. Hit the insects whenever possible. Spray CB-80 for 20 seconds per 1,000 cu. ft. of space. Keep treated areas closed for 15 minutes. Open and ventilate areas before reoccupying.

FOR PANTRY PESTS LIKE CONFUSED FLOUR BEETLES, SAWTOOTH GRAIN BEETLES, GRANARY WEEVILS, RICE WEEVILS, RED FLOUR BEETLES AND GRAIN MOTHS - Exposed or infested food products should be disposed of before treatments. Spray cracks and crevices, food containers and other areas where insects are seen. Spray surfaces at the rate of 30 seconds per 100 square feet. Keep the area closed for 45 to 60 minutes.

FOR DAIRY FARM, HORSE BARN, CATTLE, HOG AND POULTRY OPERATIONS - Close all doors and windows before treating the area. Cover Spray at the rate of 2-3 seconds per 1,000 cubic feet of space. Evacuate the treated area and keep it closed for 15 minutes. Treat these areas daily or as necessary.

TREATMENT OF ANIMALS (COW, HORSE AND SWINE) - Thoroughly spray over the entire animal from a distance of 2 feet. Do NOT spray directly towards the animal's face or eyes. Treat animals daily or if necessary.

Carefully read the product label for application instructions and precautions.

Where to Apply CB-80 EXTRA

CB-80 EXTRA is for use in: Homes, Apartments, Offices, Hotels, Hospitals, Schools, Nursing Homes, Day Care Centers, Warehouses, Stores, Restaurants, Food Handling Establishments, Food Processing Plants, Transportation Equipment, Barns, Stables, Farms, Animal Quarters, Milking Rooms and Poultry Houses.

CB D-Force HPX Product Label

CB D-Force HPX Material Safety Data Sheet (MSDS)

CB D-Force HPX - 14 oz.

The CB D-Force HPX is one of the best-selling aerosol insecticides in the market. D-Force HPX provides fast killing action and residual control over 50 species of pest insects. Properly applied, the product residues remain potent for up to 8 weeks, making the product an ideal supplement to several types of bait. Both the D-Force HPX and D-Foam contain low concentrations of the synthetic insecticide Deltamethrin. Low active ingredient and volatile organic compound (VOC) content makes the product ideal for use in residential and food-handling areas of buildings.

Why Should You Use CB D-Force HPX ?

CB D-Force has a broad spectrum label, long residual half-life and a powerful formula to effectively control invasive pests.

Directions for CB D-Force HPX Use

Shake well before each use. Hold the container upright and hold the can 12 to 15 inches away from treatment areas. Use the supplied actuator for crack and crevice treatments. Direct the nozzle towards the treatment area and apply the product as recommended in the product label.

Spray sufficient amounts of CB D-Force directly over insects or to sites where pests are seen. Pay particular attention to areas harboring insects such cracks and crevices, under appliances, sinks and other potential hiding and breeding spots. For bedbugs, remove beddings and apply the product in tufts, folds and the bed frame. Wash beddings before reusing.

CB D-Foam is suitable for surface applications, crack and crevice applications, spot treatments and wall void applications. To control subterranean termites in above-ground areas of structures, first locate galleries, voids and tunnels in wooden structural components using available location techniques. It is sometimes necessary to drill holes in order to access and inject foam into insect galleries. Apply the product to voids/areas where insects frequent, breed, and hide.

Carefully read the product label for application instructions and precautions.

Where to Apply CB D-Force HPX

CB D-Force is for use in and around: Homes, Apartments, Hospitals, Hotels, Food Handling Establishments, Restaurants, Food Processing Plants, Industrial Buildings, Storage Areas, Warehouses, and Transport Vehicles.

Eco PCO ACU Product Label

Eco PCO ACU Material Safety Data Sheet (MSDS)

Ecopco Acu Aerosol - 17 oz.

From the world leader in environmentally-safe pest control solutions, EcoSMART introduces a new contact insecticide for crawling and flying insects. EcoPCO is an unscented insecticide with Phenethyl Propionate, a natural substance derived from plants known to have insecticidal properties. This aerosol leaves no harmful residues and odors, making it ideal for use inside homes and around humans and pets.

Why Should You Use EcoPCO ACU Aerosol?

EcoPCO is safer than pyrethoid and chemical insecticides for it contains plant oils that have little effect on humans and pets.

Directions for EcoPCO ACU Aerosol Use

Shake well before using. EcoPCO is a contact insecticide that does not provide residual protection. Ensure contact with insects for effective kills. Aim directly towards insects. Apply uniformly to surfaces and spaces where insects are seen flying and crawling. Use this product for crack/crevice and void treatments by using the supplied nozzle tip. Inject to cracks, crevices, voids and other hard-to-reach areas to treat infestations.

For Crawling Insects: Crack/Crevice and Void Treatments. Important: Use the injector nozzle tip provided. Inject EcoPCO ACU Aerosol into all crack/crevice and void spaces where insects are present. Applications of EcoPCO ACU Aerosol can be made, but are not limited to, behind baseboards, cabinets, walls, ceilings, door and window frames, and around water pipes and appliances. Insects contacted by spray will be killed. Ensure contact with as many insects as possible.

Fleas & Brown Dog Ticks: Hold EcoPCO ACU Aerosol can approximately 12 inches above surface area and apply EcoPCO ACU Aerosol uniformly to infested areas such as carpets, rugs, cloth upholstery, and pet bedding. Contact fleas & ticks directly to kill these pests.

For Flying Insect Treatments: To kill these pests, aim EcoPCO ACU Aerosol spray toward flying insect infestations contacting as many insects as possible. Insects contacted by spray will be killed. Wipe away excess spray after application. Avoid spraying plants.

Where to Apply EcoPCO ACU Aerosol

Use EcoPCO ACU to kill pests in, on and around residential, commercial and industrial buildings and their immediate surroundings.

Fast Out CS Foam Product Label

Fast Out CS Foam Material Safety Data Sheet (MSDS)

FastOut CS Foam Tech Note

FastOut CS Foam

FastOut CS Foam is a non-repellent insecticide that features SmartCap microencapsulation technology. Developed by Whitmire Micro-Gen, SmartCap bolsters the performance of residuals, leading to fast kills and effective control of infestations. FastOut contains microencapsulated Cyfluthrin in a non-repellent foam solution with an exceptional expansion rate. Available in a ready-to-use bottle that provides easy delivery of foam to cracks and voids for quicker control of target pests.

Why Should You Use ?

FastOut CS is a ready-to-use product for foam applications. No measuring, no mixing and no equipment necessary. Just point and shoot, all your pest problems are gone with FastOut.

Directions for Use

Shake well before use. FastOut CS can be used for crack and crevice treatments or spot treatments to treat infestations in cracks and crevices, voids, or in exposed areas. The product is intended for support treatments in localized areas in structures and cannot be used as a substitute for stand-alone termite treatments. With the attached injector tube and tip, hold the actuator for about 8 seconds and dispense the product thoroughly in treatment areas. Application to exposed areas must be limited to sites with minimum exposure. When treating exposed areas, allow the foam/residue to dissipate and clean the area afterwards. Inject the product through structural voids, insect galleries, nests and other insect hiding spots. Treat trails, entry/exit sites and other areas where pests are found entering/exiting structures. Please refer to the product label for specific use directions.

Where to Apply

FastOut CS is for use in: Apartments, Homes, Hospitals, Hotels, Food Handling Establishments, Restaurants, Hotels, Hospitals and Nursing Homes (Non-patient Areas), Motels, Hobby Greenhouses, Interiorscapes, Office Buildings, Schools, Transportation Equipment (Buses, Boats, Ships, Trains, Planes) and Warehouses and Other Commercial and Industrial Buildings.

Microcare Product Label

Microcare Material Safety Data Sheet (MSDS)

Microcare Aerosol Pyrethrum - 20oz

Microcare Pressurized Pyrethrum Spray features SmartCap Microencapsulation Technology for quicker kills and lasting residual control of target pests. SmartCap enhances the performance of residuals by containing the active ingredient in microscopic capsules and protect it from contaminants. These microcapsules in turn, provide excellent adhesion to insect exoskeletons and surfaces. The active ingredient is transferred to other insects and released as pests preen themselves. Microcare kills several household pests and is perfect for use as a contact, space, surface, spot or crack and crevice spray.

Why Should You Use?

Microcare is a broad label insecticide that kills crawling and flying insects. A perfect product to use in sensitive conditions in residences due to its low toxicity.

Directions for Use

Shake well before use. Apply directly to exposed pests and surfaces. Application in food handling establishments is limited to crack and crevice treatments only. Use Microcare with the supplied actuator and injection tubes for crack and crevice treatments. Place injector tips into cracks and crevices and depress the actuator. Apply by moving the injector tip one lineal foot per second for heavy infestations and 3 lineal feet per second for light infestations.

FOR ANTS, COKCROACHES, CRICKETS, FIREBRATS, SILVERFISH, SPIDERS: Treat infested areas, cracks and crevices, voids, tunnels, moist areas, around pipes and openings, under sinks, refrigerators and stoves, behind cabinets, shelves and drawers, walls, floors and doors. Contact insects as much as possible. Repeat treatments once a week.

FOR CARPET BEETLES, LICE, TICKS, AND FLEAS: Vacuum carpets, rugs, furniture, closets, cushions and floor coverings to capture loose insects. Seal and dispose of used vacuum bags properly. Treat infected areas thoroughly and evenly.

FOR OUTDOOR SURFACE AND PERIMTER TREATMENTS: Spray outside surfaces of screens, window frames, doors, light fixtures and other surfaces where insects are seen congregating. Treat a band of soil measuring 6 to 10 feet wide around and adjacent of structures to create a barrier against ants, cockroaches, crickets, earwigs and scorpions. Treat building foundations to a height of 2 to 3 feet where pests may find entrance.

Where to Apply

Microcare is for use in transportation equipment, food handling and processing plants, campgrounds, food storage areas, homes, hospitals, hotels/motels, kennels, nursing homes, office buildings, picnic areas, residences, restaurants, schools, supermarkets, warehouses and other residential, commercial, industrial establishments.

Permadust Boric Acid Product Label

Permadust Boric Acid Material Safety Data Sheet (MSDS)

Permadust (Perma dust) Boric Acid Dust

Permadust (Perma Dust) Boric Acid Dust is a long lasting residual. Permadust (Perma Dust) Boric Acid Dust is a boric acid based dust aerosol that is used in cracks and crevices. Please be cautious when using around children and pets. Permadust is even good in food handling facilities for it is not affected by moisture nor heat.

Directions For Use

All residue must be out of reach of children or domestic animals. Avoid contamination of food and foodstuffs. Do not use in aircraft cabins. Before use, shake until agitator ball rattles. For best results, Use in upright position only. Do not spray on plastic, painted or varnished surfaces or directly into any electronic equipment such as radios, televisions, computers, telephones, etc. where the powdery residue may foul or short electric contacts an d circuits.

HOW TO USE WHITMIRE MICRO-GEN CRACK AND CREVICE INJECTION SYSTEM: Use PERMADUST with the supplied actuator and injection tubes. Inject PERMA-DUST into cracks and crevices or void spaces where insects may be harboring, living and breeding. Place injector tip into cracks, crevices, holes and other small openings. Release approximately one second of product. Move injector tip along cracks while treating at the rate of three linear feet per second. For closed voids, calculate the void¤?¤±¤?¤? cubic area and treat at the rate of three to five seconds per three cubic feet. For closed void areas, drill small access holes. Several holes may be required in long-running voids. This product may leave a white residue. This residue can normally be removed with a damp cloth or sponge.

INDOOR TREATMENTS CENTIPEDES, COCKROACHES, CRICKETS, DERMESTIDS, EARWIGS, MILLIPEDES, SCORPIONS, SOWBUGS AND SPIDERS: Inject with the prescribed dosage into cracks and crevices and void spaces where insects may be harboring. These may include, but are not limited to, openings around pipes and sinks, under refrigerators, behind baseboards, washing machines, stoves, cabinets, sewers, floor drains and meter boxes.

BOOKLICE, FIREBRATS AND SILVERFISH: Inject into cracks and crevices associated with baseboards, door frames, bookcases and other harborage sites.

ANTS: Inject cracks, crevices and voids where ants may be traveling and/or harboring, including, but not limited to, around doors, window frames, wall voids and other structural cracks and crevices and void areas.

STORED PRODUCT PESTS (Adult and Larval Stages): Chocolate Moths, Drug Store Beetles, Flour Beetles, Grain Weevils, Indian Meal Moths, Trogodermas: Inject into cracks and crevices and/or voids where these insects may be harboring. Infested areas may include, but are not limited to, cracks and crevices in cabinets, pantries, wall voids and in machinery.

CARPENTER BEES: Locate bee entrance holes. Inject 5-10 seconds of product into entrance holes. Seal entrances after application.

FOOD AREAS - APPLICATION LIMITED TO CRACK AND CREVICE TREATMENT ONLY: Includes areas for receiving, storage, packing (canning, bottling, wrapping, boxing), preparing, edible waste storage and enclosed processing systems (mills, dairies, edible oils, syrups). Serving areas (when food is exposed and facility is in operation) are also considered food areas. Apply directly into cracks and crevices and void areas using injection tube in points between different elements of construction, between equipment and floors, openings leading to voids and hollow spaces in walls, equipment legs and bases where insects hide. Care should be taken to avoid depositing the product onto exposed surfaces or introducing the material into the air. Avoid contamination of food or food processing surfaces.

INDOOR AND OUTDOOR TREATMENTS CARPENTER ANTS: Locate source of infestation or areas of suspected activity. Inject 5-10 seconds of product into insect tunnels and cavities. Treat points of entry or exits from voids such as around doors, windows and siding.

BOXELDER BUGS, CLOVER MITES, CLUSTER FLIES AND ELMLEAF BEETLES: Inject cracks and crevices and/or voids where these insects may be harboring or hibernating. Infested areas may include, but are not limited to, cracks and crevices, behind siding, wall voids, around window and door frames.

OUTDOOR TREATMENTS ANTS, CENTIPEDES, CLOVER MITES, COCKROACHES, CRICKETS, EARWIGS, GROUND BEETLES, MILLIPEDES, PILLBUGS, SCORPIONS, SOWBUGS AND SPIDERS: Treat cracks around doors, windows, under siding and voids at foundation level, beneath guards on loading docks, into cracks in foundations and floors and in other places where these pests may enter building.

Phantom Pressurized Insecticide Product Label

Phantom Pressurized Insecticide Material Safety Data Sheet (MSDS)

Phantom Pressurized Insecticide - 17.5 oz.

Offering the same trusted performance of Phantom Insecticide, Phantom Pressurized Aerosol Spray the active ingredient more efficiently than other residual aerosols. Labeled for indoor general pest control, Phantom kills several pests including pyrethroid-resistant strains of bedbugs and roaches. Phantom works by preventing cells inside an insect's body from generating energy leading to paralysis and death. Phantom's formulation dries in crystals, increasing the life of the active ingredient while leaving no visual residues.

Why Should You Use?

Phantom is the only liquid non-repellent insecticide labeled for general pest control indoors.

Directions for Use

Phantom Pressurized Insecticide is for crack and crevice and/or spot treatments only. Apply the product as directed in the product label. Shake well before use. Press down the spray tip to release the product and apply at the rate of 2 sec/linear feet. Move the can along the length of the treatment area. For closed voids, apply at the rate of 3 sec/cubic feet. For spot treatments, hold the can 12 inches away from the surface to be treated and spray at the maximum rate of 11 sec/2 square feet. Do not exceed 2 square feet per spot. Apply as a spot, void or crack and crevice treatment to insect harboring sites where insects, hide, live, feed and breed. Also treat areas where insects travel, enter or exit structures. Contact insects as much as possible. Treat spaces under and behind cabinets, refrigerators, stoves, sinks, expansion joints, drains, lockers, pipes, in attics, crawlspaces, and vents, around doors, windows, eaves, nests and damaged wood components of structures. Please read the product label for more information.

Where to Apply

Phantom Pressurized Insecticide is labeled for use indoors and outdoors of homes, apartments, meat, poultry, fish, and egg processing and packaging plants, entries and vestibules, offices, food and non-food areas of food handling establishments other than private residences, machine rooms, boiler rooms, garages, storage areas, warehouses and other commercial, residential, institutional and industrial establishments.

Pro Citra DL Product Label

Pro Citra DL Material Safety Data Sheet (MSDS)

Pro Citra DL Botanical Insectcide (Orange Oil) - 17.5 oz.

From Whitmire Micro-Gen's line of all natural insecticides, Pro Citra contact kill aerosol offers the same performance as synthetic insecticides without the toxicity. This natural, broad label product targets several common household insects such as ants, roaches and termites. Its active ingredient is d-Limonene, a botanical insecticide with very low toxicity to humans. This makes the product ideal for use in sensitive accounts such as schools, nursing homes and hospitals.

Why Should You Use?

Pro Citra does not contain synthetic active ingredients that are usually toxic.

ProCitra-DL is a botanical-based insecticide ideal for Crack and Crevice and spot treatment in both food and nonfood handling areas. It controls a wide variety of pests including ants, cockroaches, fleas and spiders and may be used in sensitive accounts such as schools, nursing homes, food processing plants, hospitals and government buildings.

Directions for Use

Pro Citra-DL is intended for crack and crevice and/or spot treatments only in food and non-food handling areas. Use this product with the supplied actuator and injection tubes. Place injector tip into cracks, crevices and voids where insects typically hide. Move injector tip along small openings at the rate of 3 linear feet per second for light infestations and one linear foot per second for heavy infestations. Treat close voids at the rate of one to five seconds per three cubic feet. For spot treatments, hold the container upright and direct the nozzle 12 inches from the surfaces. Treat areas under sinks, around pipes, refrigerators, stoves, washing machines, areas around cabinets, baseboards, floor drains, utility boxes and other infested sites. Contact insects as much as possible. Reapply as necessary. Read the product label for more information.

Where to Apply

Pro Citra Botanical Insecticide is for indoor use in apartments, homes, hotels, hospitals, nursing homes, schools, day care centers, food storage areas, restaurants, food processing plants, supermarkets, utilities, warehouses, modes of transport (buses, trains, trucks, ships), and other commercial, institutional and industrial buildings.

Product Label

Material Safety Data Sheet (MSDS)

Evercide Total Release Fogger (or V clean-out )

Speckoz Evercide Total Release Fogger (or V clean-out ) is mainly used in residential areas. The larger the area it is recommended you use more. For bad pest problems it is recommended to use the V Clean Out Fogger due to the fact that the pesticide come out in a fog like bombs and can travel through vents and inside walls to treat even the infested areas not shown to the eye. Please note to evacuate the facilitie while Evercide Total Release Fogger (or V clean-out ) is active for at least 3 hours.

FOR USE IN AND AROUND: Apartments, Cabins, Campers, Closed Porches, Condominiums, Dormitories, Garages, Homes, Kennels, and the Non-Food/Feed areas of Drive-ins, Drugstores, Factories, Food Plants, Hospitals, Hotels, Kitchens, Nursing Homes, Office Buildings, Railroad Cars, Rest Rooms, Schools, Ships, Storage Areas, Supermarkets, Theaters, Trailers, Trucks, Warehouses, and Zoos.

DO NOT use in small, enclosed spaces such as closets, cabinets or under counters or tables.

Do not use in a room 5 ft. X 5 ft. or smaller; instead allow fog to enter from other rooms.

Turn off ALL ignition sources such as pilot lights (shut off gas valves), other open flames or running electrical appliances that cycle off and on. (i.e. refrigerators, thermostats, etc.) Call your gas utility or management company if you need assistance with your pilot lights.

Cover exposed foods, dishes and food handling equipment. Open cabinets and doors to area to be treated.

Shut off fans and air conditioners. Close doors and windows.

Point valve opening away from face and eyes when releasing.

Use one unit for each 6,000 cubic feet of unobstructed area.

Do not remain in area during treatment and ventilate thoroughly before re-entry.

Do not use this unit in a cabinet or under counter or table. Do not use this unit in an area less than 100 cubic feet.

To Operate Valve: Place several layers of newspaper or pad on stand or table in the center of the room. To lock valve in open position for automatic discharge, press valve button all the way down, hooking catch. Then place fogger on the stand or table. Leave building at once and keep building closed for two hours before airing out. Open all doors and windows and allow to air for one-half hour. Repeat spraying in two weeks or when necessary.

To Kill Fleas and Ticks: Destroy pet's old bedding and replace. Use product as above. Treat dogs and cats with a registered tick control product prior to re-entry.

CY-Kick Aerosol Product Label

CY-Kick Aerosol Material Safety Data Sheet (MSDS)

CY-Kick Aerosol - 17.5 oz.

CY-Kick Aerosol is a residual insecticide that kills pests instantly. CY-Kick aerosol is used for cracks and crevices, spot, and void treatments. CY-Kick residual aerosol, with Cy-Kick CS's unique microcapsule suspention technology, leaves a flim on a surface applied as a residual to keep on killing pests for weeks. Since with Cy-Kick's low odor fomula, it is one of the best and perfect products for residential, food handling, and sensitive areas of indoor treatment.

Advantages of Cy-Kick Aerosol

Excellent knockdown and residual properties
Broad spectrum activity
Ideal for use in both residential and commercial accounts
Great for wood injection

Indoor Treatments with CY-Kick Aerosol:

Apply as a Crack and Crevice treatment using the prescribed dosage into cracks, crevices, and void spaces where insects may be harboring. These may include, but are not limited to, openings aroind pipes and sinks, under refrigerators, behind baseboards, washing machines, stoves, cabinets, sewers, floor drains, and meter boxes. Spot treatment may also be made to areas including, but not limited to: storage areas, closets, around water pipes, doors and windows, around refrigerators, cabinets, sinks, stoves and other equipment, shelves, drawers, and similar areas.

Apply as a Crack and Crevice treatment or spot treatment into infested and egg laying sites near pet resting areas including, but not limited to: cracks and crevices of baseboards and around door and window frames.

Apply as a Crack and Crevice treatment into cracks, crevices, and voids where ants may be traveling and/or harboring, including, but not limited to, around doors, window frames, wall voids adn other structural cracks and crevices. Spot treatment may also be made to areas including, but not limited to: storage areas, closets, around refrigerators, cabinets, sinks, stoves and other equipment, shelves, drawers, and similar areas.

Apply as a Crack and Crevice treatment into cracks and crevices of baseboards, door frames, bookcases and other harborage sites. Spot Treatment may also be made to areas including, but not limited to: storage areas, closets, around water pipes, doors and windows, around refrigerators, cabinets, sinks, stoves and other equipment, shelves, drawers and similar areas.

Apply as a Crack and Crevice treatment into cracks, crevices and/or voids where these areas may include, but not limited to: cracks and crevices in cabinets and pantries, wall voids, around window and door frames, under siding and in machinery. Spot treatment may also be made to areas including but not limited to: storage areas, closets, around water pipes, doors and windows, around refrigerators, cabinets, sinks, stoves and other equipment; shelves, drawers and similar areas.

Material Safety Data Sheet (MSDS)

Topia Insecticide Aerosol-17 oz.

Many homeowners are requesting lower-impact solutions to their pest problems. FMC Professional Solutions created Topia™insecticide to give PMPs an effective, naturally-derived tool to help them address their customers' concerns.

Topia is the first completely organic aerosol product from FMC, utilizing the powerful plant extract Geraniol to eliminate pests through contact. This water-based aerosol has low odor and low persistence in the environment, making it an ecologically-friendly alternative to other insecticides. As a 25B exempt product, Topia insecticide requires no federal registration.

Discover how offering the low-impact pest control of Topia can make a big impression on your eco-minded customers.

Fireback Fire Ant Mound Injector Product Label & MSDS

Fireback Fire Ant Spray with Mound Injector - 16 oz.

When you order 2 cans, 4 cans, or 1 case, you will get one mound injector.

Fireback Fire Ant Spray with Mound Injector comes with a unique injector rod that has omni-directional spray head and provides deep access to fire ant's mound.

Advantages of Fireback Fire Ant Spray with Mound Injector 

- Unique injector rod has omni-directional spray head and provides deep access to mound
- Immediately lowers the ants' body temperatures which disables them; this deters escape and moving of the queen
- For outdoor use only
- For use in Yards, Parks, Woodlands, Playgrounds, and Golf Courses
- "Mound-Penetrating" rod kills fire ants in their mounds

Please refer to and follow the instructions on the Fireback spray label.