PT 565 XLO Product Label

PT 565 XLO Material Safety Data Sheet (MSDS)

565 Plus XLO Contact Insecticide Pest Control 20oz Can

Whitmire Micro-Gen's 565 Plus XLO Contact Insecticide Pest Control is the perfect insect control solution. The insecticide contains the botanical insecticide Pyrethrin, an organic compound with potent insecticidal properties.

Why Should You Use 565 Plus XLO Contact Insecticide Pest Control?

565 Plus XLO covers an extensive range of bugs and a 20 oz. aerosol can cover approximately 1500 square feet of space.

Directions for 565 Plus XLO Contact Insecticide Pest Control 20oz Can Use

565 Plus XLO can be used for direct contact kills or space treatments. The product can be used indoors or outdoors to treat areas infested by insects.

Where to Apply 565 Plus XLO Contact Insecticide Pest Control 20oz Can

Apply 565 Plus XLO in apartments, homes, campgrounds, hotels, storage areas, schools, transports, supermarkets, commercial buildings and industrial buildings.

Indoor Applications

For space treatments, first calculate the size of the space to be treated. Turn off air conditioners and close all windows and doors and spray the enclosed area by directing the insecticide mist upwards. Spray at the rate of 1 to 3 seconds per 1000 cu. ft. of enclosed space and keep the area closed for at least 15 minutes for maximum effectiveness. Before reoccupying, ventilate the treated area.

For direct contact applications, place the injector tip at the can nozzle and spray on cracks and crevices frequented by insects. Spray at rates depending on applications. Spray additional amounts if necessary or when the infestation seems heavy. Please consult the Material Safety Data Sheet for the specifics.

Outdoor Applications

For outdoor treatments, spray only at wind speeds below 6 miles per hour. Repeat if necessary. Spray directly into mud dauber and wasp nests by holding the container 18" away.

Alpine Dust Product Label

Alpine Dust Material Safety Data Sheet (MSDS)

How to Applying Dust Insecticide

Alpine Dust Insecticide - 3 lbs

Alpine Dust Insecticide is a direct contact insecticide in powder form. Like other Alpine products, the dust insecticide contains the non-repellent insecticide Dinotefuran. Alpine Dust Insecticide is tested and proven to control ants, cockroaches, bed bugs, beetles, fleas, moths, spiders, flies, wasps, millipedes and centipedes.

Why Should You Use Alpine Dust Insecticide?

Alpine Dust Insecticide provides a quick knockdown to a wide range of controllable pests. A 3 lb bag of the product covers approximately 3000 square feet.

Directions for Alpine Dust Insecticide Use

Product can be applied by hand or by the use of dusters and other similar equipment to ensure uniform applications. Spread the product evenly on to infested areas following the recommended application rates found in the product label. Apply 0.15 to 0.30 oz. of the product per square yard of surface area.

Please read the product label for application instructions and the recommended application rates. Pestmall offers Centrobulb Dusters and Bellow Dusters needed to apply Alpine Dust Insecticides.

Do not apply the product to surfaces where food is processed such as kitchen tables and sinks.

Do not treat pets or pet beddings with the product. Replace beddings after treating the area.

Please read the product label for application instructions and the recommended application rates. Pestmall offers Centrobulb Dusters and Bellow Dusters needed to apply Alpine Dust Insecticides.

Where to Apply Alpine Dust Insecticide

Alpine Dust Insecticide is for use in and around residential, commercial and industrial buildings. Apply thoroughly and evenly to infested areas, cracks and crevices, nests, voids, corners, under sinks and shelves, storage areas and other places where insects congregate, nest and hide.

For perimeter applications, sprinkle the product around insect entry holes such as structural cracks and crevices, window sills, patios, porches and other areas where insects have access to the building.

Bifen IT Product Label

Bifen IT Material Safety Data Sheet (MSDS)

BIFEN I/T - 1 Pint

Bifen I/T (Insecticide/Termiticide) is one of the most potent insecticides in the market. With 7.9% Bifenthrin, the product is highly effective in controlling a wide variety of pest insects, including various species of subterranean termites. Bifen I/T is specially formulated to control termite and insect infestations around commercial, residential and industrial structures.

Why Should You Use BIFEN I/T ?

Bifen I/T contains high concentrations of Bifenthrin to control and prevent termite and insect infestations. In addition, the product leaves a long-lasting residual effect that last for months.

Directions for BIFEN I/T Use

Applying Bifen I/T requires the use of suitable application equipment and personal protective equipment. The product is extremely toxic. Please refer to the product label before using or handling the product. Please read the product label for information on treatments, dilutions and application methods. Depending on the target pest and the method of application, Bifen I/T should be applied using the correct methods as stated in the product label. The product can be used for broadcast treatments, perimeter treatments, crack and crevice applications, sub-slab injections and residual barrier treatments. For subterranean termite control, methods may be employed such as trenching, rodding, crack and crevice injection or absorption for effective control.

Bifen I/T can also be used to control Armyworms, Cutworms, Sod Webworms, Annual Bluegrass Weevils, Billbugs, Black Turfgrass Ataenius, Leafhoppers, Mealybugs, Ants, Centipedes, Chinch Bugs, Fleas , Imported Fire Ants, Millipedes, Mole Crickets, Ticks, Pillbugs, Sowbugs and European Crane Flies. Please read the product label for directions and mixing instructions.

Where to Apply BIFEN I/T

Use Bifen I/T to treat infested areas in and around residential, commercial, public and industrial buildings. The product is for use in lawns, parks, recreational areas and athletic fields.

Carpenter Bees Control Basic Kit

The Carpenter Bee Control Basic Kit contains everything you need in order to control carpenter bees at an affordable price. This kit contains Delta Dust, Bellow Bulb Duster, FenvaStar EcoCap, and 15 Trebor Triple Seal Plugs for a complete and effective treatment in getting rid of carpenter bees.

Trebor Triple Seal Plug

Trebor Triple Seal Plug are one of the most effectively used tools out in the pest control industry today. Most people are unaware of the fact that insects like to live inside walls and cervices. Insects also like to lay their eggs in dark and damp areas such as inside the walls. The best way to solve this problem is to use a fog or foam method. Using a drill, drill a hole inside on the wall and using the termiticides. Afterwards plugging the Trebor Triple Seal Plug will prevent and insect from trying to come out.

FenvaStar EcoCap Product Label

FenvaStar EcoCap Material Safety Data Sheet (MSDS)

FenvaStar EcoCap-(Generic Onslaught) - 8oz.

Fenvastar EcoCap is a microencapsulated suspension concentrate containing 0.3 pounds active ingredient per gallon.

Fenvastar EcoCap is designed to provide long residual activity against pests listed on this label when applied as surface or spot treatments or as a crack and crevice spray in and around residential and commercial structures, as well as on turf and landscaping. Fenvastar EcoCap may be sprayed on any surface that will not be stained by water. DO NOT use this product as a fogger or apply it as a space spray. Do not apply in electrical conduits, junction and switch boxes, motor housings, or other electrical equipment due to shock hazard from water-based spray.

Bellow Bulb Duster (Insecticide Powder Duster)

Bulb Dusters are very useful when applying powder or dust pesticides. Powdered insecticide must be applied uniformly to treatment areas to maximize its effects. No matter how effective or potent the insecticide is, success in insect control depends on how the insecticide is applied.

Delta Dust Product Labe

Delta Dust Material Safety Data Sheet (MSDS)

How to Apply Dust Insecticide

Delta Dust - 1 lb.

Bayer's Delta Dust is a waterproof insecticide in powder form. Unlike other dusts and residuals, Delta Dust stays dry and active even when applied in areas with high humidity and moisture. Pests prefer damp places such as under sinks and along plumbing and Delta Dust is the perfect control product to use. Fast acting and long lasting, this contact insecticide kills pests upon contact remains active for up to 8 months! Low active ingredient concentration makes the product safe for use even in food handling areas.

Carpenter Bees Control Kit

The Carpenter Bee Control Kit contains everything you need in order to control nasty carpenter bees at an affordable price. The kit contains a dust product called Delta Dust, which has a delayed, contact kill effect on the carpenter bees. Also included is a Bellow Bulb Duster used to spread even, thin layers of the Delta Dust. The kit also includes Lambdastar 9.7% CS, a long lasting residual product that is clear and odorless. This product is suitable for use both indoors and outdoors. The kit also provides a 1 Gallon Sprayer to mix and allow convenient spraying of the liquid concentrate mixture. 50 Trebor Triple Seal Plugs are also included and can be used to securely seal the holes that the carpenter bees create.

Trebor Triple Seal Plug

Trebor Triple Seal Plug are one of the most effectively used tools out in the pest control industry today. Most people are unaware of the fact that insects like to live inside walls and cervices. Insects also like to lay their eggs in dark and damp areas such as inside the walls. The best way to solve this problem is to use a fog or foam method. Using a drill, drill a hole inside on the wall and using the termiticides. Afterwards plugging the Trebor Triple Seal Plug will prevent and insect from trying to come out.

LambdaStar 9.7% CS Material Safety Data Sheet (MSDS)

LambdaStar 9.7% CS Info Sheet

LambdaStar 9.7% CS

LambdaStar 9.7% CS - LambdaStar 9.7% CS is a microencapsulated lambda-cyhalothrin in an easy to mix formulation which utilizes EcoCap technology. Instead of using petroleum like other microcaps, Eco Caps are made with renewable vegetable oil. Eliminating petroleum allows the product to avoid California Prop 65 regulations. Independent lab tests demonstrate efficacy on a wide range of pests. The product may be used indoors, including food areas, and outdoors including structural, turf and ornamental, and livestock housing sites. This is a green formulation containing the active ingredient lambdacyhalothrin.

Chapin 1gal Sprayer Manuals

Chapin 1 Gallon Sprayer

Chapin 1 Gallon Sprayer is one of the most useful tools. Chapin is one of the biggest Sprayer Manufacturers today, guaranteeing satisfation. Chapin 1 Gallon Sprayer is the perfect size for small areas and also one of the easiest sprayers to use these days.

Bellow Bulb Duster (Insecticide Powder Duster)

Bulb Dusters are very useful when applying powder or dust pesticides. Powdered insecticide must be applied uniformly to treatment areas to maximize its effects. No matter how effective or potent the insecticide is, success in insect control depends on how the insecticide is applied.

Delta Dust Product Labe

Delta Dust Material Safety Data Sheet (MSDS)

How to Apply Dust Insecticide

Delta Dust - 1 lb.

Bayer's Delta Dust is a waterproof insecticide in powder form. Unlike other dusts and residuals, Delta Dust stays dry and active even when applied in areas with high humidity and moisture. Pests prefer damp places such as under sinks and along plumbing and Delta Dust is the perfect control product to use. Fast acting and long lasting, this contact insecticide kills pests upon contact remains active for up to 8 months! Low active ingredient concentration makes the product safe for use even in food handling areas.

CB D-FOAM Product Label

CB D-FOAM Material Safety Data Sheet (MSDS)

CB D-Foam - 17 oz. can

Waterbury's CB line of residuals now includes a ready-to-use contact insecticide in a foam solution. With a high expansion rate, CB D-Foam fills voids rapidly to control insects in hard to reach areas. The product targets a broad range of pest insects including termites, ants, bees, beetles and cockroaches. CB D-Foam offers long lasting residual control that lasts for up to 8 weeks! CB D-Foam contains Deltamethrin, a synthetic pyrethroid insecticide widely used due to its effectiveness and its low toxicity to mammals.

Why Should You Use CB D-Foam ?

CB D-Foam is unrivaled in contact kill and residual control efficiency. Once applied the product continues to kill pests for 2 months, greatly reducing control costs.

Directions for CB D-Foam Use

Shake well before using. Hold container upright and direct the nozzle towards the treatment area. For crack and crevice treatments, remove the nozzle cap from the container and install the supplied actuator. Replace the protective cap. Aim the nozzle towards the treatment area, press the button and apply the product as directed in the product label.

CB D-Foam is suitable for surface applications, crack and crevice applications, spot treatments and wall void applications. To control subterranean termites in above-ground areas of structures, first locate galleries, voids and tunnels in wooden structural components using available location techniques. It is sometimes necessary to drill holes in order to access and inject foam into insect galleries. Apply the product to voids/areas where insects frequent, breed, and hide.

Where to Apply CB D-Foam

CB D-Foam is for use in and around: Homes, Apartments, Hospitals, Hotels, Food Handling Establishments, Restaurants, Food Processing Plants, Industrial Buildings, Storage Areas, Warehouses, and Transport Vehicles.

CB Intruder HPX Product Label

CB Intruder HPX Material Safety Data Sheet (MSDS)

CB Intruder HPX - 14 oz.

CB Intruder HPX-15 Residual with Cyfluthrin provides fast knockdown with 4-8 week residual action. CB Intruder HPX-15 Residual with Cyfluthrin is ideal for crack and crevice control in food handling areas.

Please refer to and follow the instruction on the CB Intruder HPX Product label.

CB-80 Extra Product Label

CB-80 Extra Material Safety Data Sheet (MSDS)

CB-80 Extra aerosol - 17 oz.

CB-80 Extra is today's best-selling contact-kill insecticide used by all the pro's in the industry. CB-80 provides extra-fast knockdown and elimination of most common pests. The ingredients in CB-80 Extra are safe enough to be used in food handling establishments, such as restaurants, supermarkets, and farms as well as residential and commercial establishments.

Why Should You Use CB-80 EXTRA?

CB-80 EXTRA is unparrallelled in proving fast knockdown to a number of household pests including flies, mosquitoes, cockroaches. Excellent for use as a space spray, CB-80 contains no harmful chemicals and is safe to use in food storage areas to treat pantry pests. Licensed by the USDA for use in Federally Inspected Meat and Poultry Plants, the product can also be used to treat animals and animal facilities

Directions for CB-80 EXTRA Use

CB-80 can be used as an indoor surface/contact spray, space spray or as a crack and crevice spray. When using the product to treat spaces, first calculate the size of the space to be treated and spray at rates recommended in the product label. For crack and crevice treatments, calculate the volume of the void and treat using the supplied crack and crevice nozzle. Spray towards areas where insects frequent, hide and congregate. Treated areas/spaces must be ventilated before reoccupying.

FOR CONTROL OF FLYING INSECTS SUCH AS FLIES, GNATS, MOSQUITOES, MOTHS AND WASPS - Calculate the volume of the space to be treated and apply at the rate of 2 to 3 seconds per 1,000 cubic feet.

FOR CRAWLING INSECTS SUCH AS COCKROACHES, ANTS AND SPIDERS -Before applications, turn off air conditioners and close all doors and windows. Treat hiding spaces such as cabinets, under sinks, cracks and crevices, behind appliances, along plumbing, baseboards and floors. Hit the insects whenever possible. Spray CB-80 for 20 seconds per 1,000 cu. ft. of space. Keep treated areas closed for 15 minutes. Open and ventilate areas before reoccupying.

FOR PANTRY PESTS LIKE CONFUSED FLOUR BEETLES, SAWTOOTH GRAIN BEETLES, GRANARY WEEVILS, RICE WEEVILS, RED FLOUR BEETLES AND GRAIN MOTHS - Exposed or infested food products should be disposed of before treatments. Spray cracks and crevices, food containers and other areas where insects are seen. Spray surfaces at the rate of 30 seconds per 100 square feet. Keep the area closed for 45 to 60 minutes.

FOR DAIRY FARM, HORSE BARN, CATTLE, HOG AND POULTRY OPERATIONS - Close all doors and windows before treating the area. Cover Spray at the rate of 2-3 seconds per 1,000 cubic feet of space. Evacuate the treated area and keep it closed for 15 minutes. Treat these areas daily or as necessary.

TREATMENT OF ANIMALS (COW, HORSE AND SWINE) - Thoroughly spray over the entire animal from a distance of 2 feet. Do NOT spray directly towards the animal's face or eyes. Treat animals daily or if necessary.

Carefully read the product label for application instructions and precautions.

Where to Apply CB-80 EXTRA

CB-80 EXTRA is for use in: Homes, Apartments, Offices, Hotels, Hospitals, Schools, Nursing Homes, Day Care Centers, Warehouses, Stores, Restaurants, Food Handling Establishments, Food Processing Plants, Transportation Equipment, Barns, Stables, Farms, Animal Quarters, Milking Rooms and Poultry Houses.

Cy-Kick CS Insecticide Product Label

Cy-Kick CS Insecticide Material Safety Data Sheet (MSDS)

Cy-Kick CS Insecticide - 1 pint

Cy-Kick CS is a liquid insecticide with a 6.0% Cyfluthrin concentration. This fast-acting and long-lasting active ingredient effectively eliminates pests and provides a formidable barrier against future infestations indoors and outdoors. Using microencapsulation technology, Cy-Kick CS not only kills pest fast, its effects also lasts. Properly applied, Cy-Kick CS guarantees to provide your home a long-lasting pest protection for up to 3 months.

Why Should You Use Cy-Kick CS?

Cy-Kick CS is one of the best selling liquid insecticides trusted by professionals for its broad spectrum label, long residual life and effeciency.

Directions for Cy-Kick CS Use

First check the spraying equipment to be used in applying Cy-Kick CS and make sure that the equipment is clean and functioning. For your spraying equipment needs, PestMall offers a wide range of spraying equipment which can be found here.

Shake vigorously a pint of Cy-Kick CS Controlled Release Cyfluthrin Insecticide before diluting in 16 gallons of water. A ratio of 1 or 2 fluid ounces of Cy-Kick CS to a gallon of water yield 0.05% and 0.10% concentrations respectively. Concentrations may be varied depending on applications such as infestation intensity or residue control. Mix and agitate the spray solution to ensure an even mixture before spraying.

Surfaces must be prepared and thoroughly cleaned before commencing the treatment. Before treating, surfaces must be checked for exposed electrical connections and water presence. Cy-Kick CS should not be applied directly onto drifting water, which may contaminate water supplies in inhabited areas.

The product is extremely toxic and must be kept out of reach of children. Remember to wear safety apparel such as masks, gloves, goggles, boots and protective clothing before spraying.

Where to Apply Cy-Kick CS

Indoor Applications

Apply Cy-Kick CS indoors by first adding fluid ounce of Cy-Kick CS to a gallon of water for a 0.05% spray solution or increase Cy-Kick CS to water ratio as recommended. (Please refer to the Spray Dilution Chart)

Prepare and thoroughly clean indoor surfaces before treatment. Spray the diluted solution of Cy-Kick CS to infested areas, cracks, crevices and other areas frequented by pests. Treatments must be done 3 days apart if necessary.

Outdoor Applications

Apply Cy-Kick CS outdoors by first adding fluid ounce of Cy-Kick CS to a gallon of water for a 0.05% spray solution or increase Cy-Kick CS to water ratio as recommended. (Please refer to the Spray Dilution Chart)

Prepare and thoroughly clean outdoor surfaces before treating them. Spray the diluted solution of Cy-Kick CS to infested areas, cracks, crevices and other areas frequented by pests. Treatments must be done 3 days apart if necessary. Treat perimeter soil and building foundations to prevent future infestations.

CyhaloCap CS Product Label

CyhaloCap CS Material Safety Data Sheet (MSDS)

CyhaloCap CS Insecticide - 1 pint

High-performance microencapsulation technology for residual control. CyhaloCap CS (Capsule Suspension) Insecticide provides broad-spectrum, residual control of structural pests for PMPs who prefer lambda-cyhalothrin.

For Use in and Around: Indoor and outdoor

Product Description

CyhaloCap CS is a dilutable spray containing BASF's proprietary SmartCap microencapsulation technology and featuring lambda-cyhalothrin, a proven active ingredient with broad spectrum activity and effective residual control of structural pests.

Cynoff EC Product Label

Cynoff EC Material Safety Data Sheet (MSDS)

CYNOFF EC - 1 Quart

Cynoff EC uses a knock down method which last longer then organophosphates to control pest. Once the pest comes in contact with Cynoff EC, it is killed. Cynoff EC is an odorless insecticide concentrate and leaves no residue. Cynoff EC, along with Cynoff WP and Demon WP, belong in the synthetic pyrethroid family, carrying the same active ingredient as Cyper WP and Demon WP. You only need 1/2 to 1 ounce of Cynoff EC per gallon of water, one quart yielding 32-64 gallons.

Fortified by Cypermethrin, Cynoff EC Insecticide delivers quick and powerful cleanout control of cockroaches and other pests. Upon contact or ingestion, the active ingredient instantly paralyzes and kills insects. Commonly used for residual control or direct kill applications, Cynoff can also be used for barrier treatments with exceptional results.

Why Should You Use CYNOFF EC ?

Cynoff EC provides immediate solutions to several infestations. It is a fast-acting contact insecticide that is odorless and long lasting.

* Outdoor use only.

**Not for Indoor use in California

Directions for CYNOFF EC Use

Cynoff EC is a concentrate that must be diluted in water for spray or brushing applications. Fill sprayer tanks half-full before adding the concentrate. Add the remaining volume of water and agitate the tank to ensure a uniform mixture. Depending on the target pest/s, solutions must have 0.1% to 0.2% active ingredient content. This can be made by mixing 1/2 fl. oz. of Cynoff with 1 gallon of water to produce solutions with 0.1% A.I. concentration. Doubling the amount of the concentrate yields solutions with 0.2% A.I. content.

Apply the product as a coarse, low pressure spray to infested areas and potential insect-harboring sites such as basements, attics, behind and under appliances, storage areas, cabinets, shelves, baseboards, under sinks and along plumbing. Pay particular attention to cracks, crevices and voids.

Using hand or power sprayers, apply the product by brush or residual spray to building surfaces, porches, window screens, patios, lawns and other grass areas to control outdoor insects.

For barrier treatments, create a band measuring 6 to 10 feet around structures to protect them from infestations. Apply the product as a coarse spray, at the rate of 1 gallon per 400 square feet. Also treat building foundations and other potential entry points to a height of 3 to 5 feet.

To control cluster flies, mix 1 fluid ounce of Cynoff to 10 fluid ounces of mineral oil. Apply to 1,000 square feet of wall area using fogging equipment.

Where to Apply CYNOFF EC

Cynoff EC is for residual pest control in and on buildings and structures including: industrial buildings, houses, apartment buildings, laboratories, buses, greenhouses, and the nonfood/feed areas of stores, warehouses, vessels, railcars, trucks, trailers, aircraft (Do not use in aircraft cabins), schools, nursing homes, hospitals, restaurants, hotels, and food manufacturing, processing, and servicing establishments.

Cynoff WP Product Label

Cynoff WP Material Safety Data Sheet (MSDS)

Cynoff WP - 1 lb.

The power of Cypermethrin is now available in powder form with FMC's Cynoff WP. Excellent for broadcast, perimeter, and crack and crevice treatments, Cynoff delivers superior residual and contact kill to common pests. Cynoff WP has an active ingredient content of 40%, nearly doubling that of Cynoff EC. WP is a cost-effective insecticide that can yield up to 48 gallons of solution at the cost less than its competitors.

Why Should You Use CYNOFF WP?

Cynoff cost less but performs better than other insecticide brands.

Directions for CYNOFF WP Use

Cynoff WP must be diluted in water for spray or brushing applications. The product comes with a plastic scoop with 0.33 oz. capacity. Use a full scoop of Cynoff WP per gallon of water to yield a solution having 0.1% of the active ingredient. Doubling the amount of the concentrate yields solutions with 0.2% active ingredient content. Depending on the target pest/s, solutions must have 0.1% to 0.2% active ingredient content.

Apply the product as a coarse, low pressure spray to infested areas and potential insect-harboring sites such as basements, attics, behind and under appliances, storage areas, cabinets, shelves, baseboards, under sinks and along plumbing. Pay particular attention to cracks, crevices and voids.

Using hand or power sprayers, apply the product by brush or residual spray to building surfaces, porches, window screens, patios, lawns and other grass areas to control outdoor insects.

For barrier treatments, create a band measuring 6 to 10 feet around structures to protect them from infestations. Apply the product as a coarse spray, at the rate of 1 gallon per 400 square feet. Also treat building foundations and other potential entry points to a height of 3 to 5 feet.

Where to Apply CYNOFF WP

Cynoff WP is for residual pest control in and on buildings and structures including: industrial buildings, houses, apartment buildings, laboratories, buses, greenhouses, and the nonfood/feed areas of stores, warehouses, vessels, railcars, trucks, trailers, aircraft (Do not use in aircraft cabins), schools, nursing homes, hospitals, restaurants, hotels, and food manufacturing, processing, and servicing establishments.

Delta Dust Product Labe

Delta Dust Material Safety Data Sheet (MSDS)

How to Apply Dust Insecticide

Delta Dust - 1 lb.

Bayer's Delta Dust is a waterproof insecticide in powder form. Unlike other dusts and residuals, Delta Dust stays dry and active even when applied in areas with high humidity and moisture. Pests prefer damp places such as under sinks and along plumbing and Delta Dust is the perfect control product to use. Fast acting and long lasting, this contact insecticide kills pests upon contact remains active for up to 8 months! Low active ingredient concentration makes the product safe for use even in food handling areas.

Please read the product label for application instructions and the recommended application rates. Pestmall offers Centrobulb Dusters and Bellow Dusters needed to apply Delta Dust Insecticides.

Why Should You Use Delta Dust?

Unlike other dust insecticides, Delta Dust stays dry and effective and remains so for eight long months.

Directions for Delta Dust Use

Delta Dust should be applied uniformly over treatment areas using proper application equipment such as hand dusters, power dusters or paint brushes. Pay special attention to cracks and crevices, voids, under appliances, ducts, plumbing, attics, crawlspaces, baseboards and other sites frequented by pests.

Control listed pests by treating infested areas with Delta Dust at the rate of 2 to 3 grams per 1,000 square feet. Repeat treatments if necessary.

FOR CONTROL OF ANTS, BLACK CARPET BEETLES, BOXELDER BUGS, CENTIPEDES, COCKROACHES, CRICKETS, FLEAS, FIREBRATS, GROUND BEETLES, MILLIPEDES, SCORPIONS, SPIDERS SOWBUGS,SILVERFISH AND WEBBING CLOTHES MOTHS: Thoroughly apply the product to areas where these pests are known to frequent, breed, hide and congregate. Apply the product over ant trails and entry points such as windows and doors. Treat pet sleeping quarters, moist areas under sinks, under and behind refrigerators, inside cabinets and other known infestation sites of the above listed pests.

TERMITES, CARPENTER ANTS AND CARPENTER BEES: Apply the product through cracks and voids on wooden components damaged by wood-boring insects. Treat surfaces vulnerable to infestations such as foundations and walls. Holes may be drilled through damaged components in order to treat inaccessible tunnels and galleries inside. Use this product as a supplement to other treatments.

WASPS AND BEES: Wear protective clothing to avoid stings. It is recommended to treat nests late in the day where wasps/bees are generally less active. Uniformly apply Delta Dust over wasp/bee nests, entrances and their immediate surroundings. Drilling may be necessary to apply the product inside nests.

BEDBUGS: Delta Dust can be used together with other insecticides to treat bed bug infestations. Apply dust to folds and tufts of mattresses, headboards, footboards, springs, bed frames, cracks and spaces between components, furniture, upholsteries and other infested areas. Let the product settle for 4 to 6 hours and thoroughly vacuum treated areas afterwards.

STORED PRODUCT PESTS SUCH AS CADELLES, CHEESE MITES, CIGARETTE BEETLES, CONFUSED FLOUR BEETLES, DARK MEAL WORMS, DRUGSTORE BEETLES, GRAIN MITES, GRANARY WEEVILS, LESSER GRAIN BORERS, MERCHANT GRAIN BEETLES, RED FLOUR BEETLES, RICE WEEVILS, RUSTY GRAIN BEETLES, SAWTOOTHED GRAIN BEETLES, SPIDER BEETLES, TOBACCO MOTHS AND YELLOWMEAL MOTHS: Thoroughly clean storage areas from dirt, debris, dust and dispose of contaminated/infested products. Apply dust to floors, walls and surfaces in storage and handling areas. Treat cracks and crevices, shelves and other sites that may provide harborage to insects.

Where to Apply Delta Dust

Aircrafts, Animal Quarters/Kennels, Apartments, Buses, Food/Feed Manufacturing, Processing and Service Establishments, Greenhouses, Grocery Stores and Supermarkets, Hospitals, Hotels, Motels, Houses, Industrial Buildings and Installations, Laboratories, Mausoleums, Mobile Homes and Recreational Vehicles, Nursing Homes/Day Care Centers, Rail Cars, Restaurants, Schools, Sewers, Stores and Institutions, Telecommunication Conduits, Theaters, Trucks and Trailers, Utility Vaults and Conduits, Vessels, Warehouses and Zoos.

Demand CS Product Label

Demand CS Material Safety Data Sheet (MSDS)

Demand CS Brochure

Demand CS - 8 oz

Demand CS is a highly active insecticide featuring Syngenta's iCAP microencapsulation technology. By encapsulating Lambda-Cyhalothrin, Demand CS produces residuals that are waterproof, photo-stable, and long lasting. Controlled release of the active ingredient greatly increases residual life at the same time reduce the residue's odors and stains. Versatile and economical, Demand mixes well with other registered pesticides and can be diluted and applied in very low concentrations.

Why Should You Use DEMAND CS ?

Demand CS uses microencapsulation techniques to extend the life end efficiency of residuals.

Directions for DEMAND CS Use

Use Demand CS for surface, crack and crevice or spot treatments. The product comes as a concentrate that must be diluted with water and applied using application equipment such as hand/power sprayers.

Shake well before using. Mix Demand CS with water to produce solutions. Finished solutions can be converted to foam using foaming agents to treat structural voids and nests. Solutions may have 0.015% to 0.06% active ingredient content, depending on the target pest/s and the severity of their infestations. Other registered insecticides may be added to yield solutions with multiple capabilities. Please read the product label for dilution tables and application rates.

Apply as a coarse, low pressure spray to indoor or outdoor sites and surfaces. Spray to areas where insects are seen congregating, hiding, breeding and other potential harborage areas. Pay special attention to cracks, crevices and voids in structures. Treat these areas with liquid or foam using appropriate equipment and methods.

Demand CS can also be used to create perimeter barriers, treat infestations in ornamental plants and turf and for subsurface treatments to control mole crickets and ants. Refer to the product label for specific instructions on how to control target pests.

Where to Apply DEMAND CS

Demand CS is for use in, on and around residential, commercial, institutional, public, agricultural and industrial buildings/structures.

CB D-Force HPX Product Label

CB D-Force HPX Material Safety Data Sheet (MSDS)

CB D-Force HPX - 14 oz.

The CB D-Force HPX is one of the best-selling aerosol insecticides in the market. D-Force HPX provides fast killing action and residual control over 50 species of pest insects. Properly applied, the product residues remain potent for up to 8 weeks, making the product an ideal supplement to several types of bait. Both the D-Force HPX and D-Foam contain low concentrations of the synthetic insecticide Deltamethrin. Low active ingredient and volatile organic compound (VOC) content makes the product ideal for use in residential and food-handling areas of buildings.

Why Should You Use CB D-Force HPX ?

CB D-Force has a broad spectrum label, long residual half-life and a powerful formula to effectively control invasive pests.

Directions for CB D-Force HPX Use

Shake well before each use. Hold the container upright and hold the can 12 to 15 inches away from treatment areas. Use the supplied actuator for crack and crevice treatments. Direct the nozzle towards the treatment area and apply the product as recommended in the product label.

Spray sufficient amounts of CB D-Force directly over insects or to sites where pests are seen. Pay particular attention to areas harboring insects such cracks and crevices, under appliances, sinks and other potential hiding and breeding spots. For bedbugs, remove beddings and apply the product in tufts, folds and the bed frame. Wash beddings before reusing.

CB D-Foam is suitable for surface applications, crack and crevice applications, spot treatments and wall void applications. To control subterranean termites in above-ground areas of structures, first locate galleries, voids and tunnels in wooden structural components using available location techniques. It is sometimes necessary to drill holes in order to access and inject foam into insect galleries. Apply the product to voids/areas where insects frequent, breed, and hide.

Carefully read the product label for application instructions and precautions.

Where to Apply CB D-Force HPX

CB D-Force is for use in and around: Homes, Apartments, Hospitals, Hotels, Food Handling Establishments, Restaurants, Food Processing Plants, Industrial Buildings, Storage Areas, Warehouses, and Transport Vehicles.

DRAGNET SFR Product Label

DRAGNET SFR Material Safety Data Sheet (MSDS)

Dragnet SFR - 1 Qt

From the makers of CB Residuals and Talstar insecticides comes another revolutionary termiticide with enhanced residual and contact kill capabilities. FMC's Dragnet SFR Termiticide/Insecticide does not break down easily in soil and retains its potency for extended periods of time. Specially formulated for subterranean termites, Dragnet also targets a wide range of indoor and outdoor pest insects. Versatile and very economical, one quart yields 100 gallons of solution that can be used in a variety of applications.

Why Should You Use Dragnet SFR ?

Dragnet SFR is superior in both residual control and contact kills to more than 50 insects in its label.

Directions for Dragnet SFR Use

Dragnet SFR is a concentrate that must be diluted in water to create emulsions. Active ingredient content may vary from 0.5% to 2.0% depending on treatments or target pests. Use this product for pre-construction treatments of structures or to treat existing termite infestations in and around buildings and structures. Knowledge of treatment techniques such as rodding, trenching, sub-slab injections, void injections and crack and crevice treatments is essential in order to have effective control of termites. Use this product for residual pest control in and on buildings and their immediate surroundings. Dragnet SFR may be used in broadcast applications, spot applications, crack and crevice injections or as a paint-on treatment. Consult the product label for more details.

Where to Apply Dragnet SFR

Dragnet SFR is for use in and around residential, commercial, public and industrial buildings. This includes homes, apartments, laboratories, greenhouses, non-food areas of food handling store areas, warehouses, schools, nursing homes, hospitals, transports and food processing, manufacturing and servicing establishments.

Drione dust Product Label

Drione dust Material Safety Data Sheet (MSDS)

How to Applying Dust Insecticide

Drione Dust - 1 lb.

Drione Dust provides contact kill and residual control of target pests in and around homes. A powerful combination of pyrethrins, synergists and desiccants makes Drione an excellent dust. A broad label product, Drion controls dozens of common house pests including pantry pests. When used as directed, residuals may last for 6 months if undisturbed.

Why Should You Use?

Drione contains a combination desiccants and pyrethrins that dehydrates and poisons insects, killing them off in two lethal blows.

Directions for Use

Application of Drione is limited to crack and crevice treatments only. Using hand dusters, powered dusters or similar equipment, apply the product in cracks and crevices, voids, gaps between structural components, spaces under and behind appliances, inside cabinets and closets, under sinks, along plumbing, crawl spaces and other infested areas. Apply at the rate of 2 ounces per 100 square feet in kennels and animal quarters. For severe infestations, apply Drione at the rate of 16 ounces per 1000 square feet of surface area. Please read the product label for directions on how to control specific pests.

Please read the product label for application instructions and the recommended application rates. Pestmall offers Centrobulb Dusters and Bellow Dusters needed to apply Drione Dust Insecticides.

Where to Apply

Drione Dust is labeled for use in and around food and non-food areas of residential, commercial, agricultural and industrial buildings. Permitted areas of use include homes, apartments, hospitals, schools, warehouses, restaurants, office buildings, hotels, trucks, trailers and lawns.

EcoPCO Jet  Product Label

EcoPCO Jet  Material Safety Data Sheet (MSDS)

EcoPCO Jet  - Wasp & Hornet Jet Aerosolay

EcoPCO Jet  is unscented and provides immediate knockdown and kill of stinging insects including wasps, hornets, yellow jackets, and spiders. The jet action can reach kill insects up to 15 feet away. Also, EcoPCO Jet  leaves a non-staining residue which provides long-lasting protection. EcoPCO Jet X is natural and organic pesticide and CFC free. And EcoPCO Jet  is safe for use around electrical outlets.

Directions for Use

Shake well before using

Wasp and Hornet Treatments: Stand a safe distance from the nest. Hold the aerosol can in an upright position and aim actuator opening toward nest. Treat nest until wet. Contact as many wasps/hornets as possible. Best time to apply is in the evening or early morning when they tend to be in or around the nest. Repeat as necessary.

Yellow Jacket Treatments: Stand a safe distance from the underground nest. Hold the aerosol can in an upright position and aim actuator opening toward nest. Apply with a sweeping motion and contact as many yellow jackets around nest opening. Next, approach nest opening and apply directly into opening for 8 seconds to kill yellow jackets in the nest. This will also repel any yellow jackets trying to return to the nest and cause them to fly away. Repeat as necessary.

Spider Treatments: Aim actuator at spiders and web and apply. Contact as many spiders as possible. Repeat as necessary.

*EcoPCO Jet  should not stain surfaces such as vinyl or painted siding. However, since it is impossible for the manufacturer to test all surfaces under all conditions, good application practices recommend that you test the spray in an inconspicuous area when treating a new surface.

Eco Exempt IC 2 Product Label

Eco Exempt IC 2 Material Safety Data Sheet (MSDS)

Eco exempt IC-2 Insecticde (Essentria IC - 3)

Eco exempt IC-2 Insecticde (Essentria IC - 3) uses a knockdown method to kill pests the minute they come into contact with it. EcoExempt IC is an all-natural substance made from oils such as rosemary, wintergreen, and eugenol. Unlike chemical pesticides, EcoExempt IC-2 leaves behind a botanical scent. EcoExempt IC- 2 works great for corners, cracks, and crevices.

Inside: Apartment buildings, bakeries, beverage plants, bottling facilities, breweries, cafeterias, candy plants, canneries, cereal processing and manufacturing plants, dairy barns, poultry facilities, flour mills, food processing plants, frozen food plants, homes, hospitals, hotels, houses, industrial buildings, kennels, kitchens, laboratories, manufacturing facilities, mausoleums, meat processing and packaging plants, meat and vegetable canneries, motels, nursing homes, office buildings, restaurants, schools, stores, supermarkets, warehouses, and similar structures.

Outside:Building foundations, dairy facilities, drive-in restaurants, drive-in theaters, golf courses, parks, playgrounds, poultry houses, recreational areas, schools, urban areas, lawns, landscape areas, trees, turf, and zoos.

For sensitive indoor/outdoor surfaces such as vinyl, plastic, fabric, wood floors, etc. test a small non-visible area first before spraying. This includes vinyl siding, outdoor furniture, storm doors and windows, etc. It is possible that EcoEXEMPT IC2 may mar some sensitive surfaces. If spray gets on any sensitive surface that is listed, simply rinse with water and wipe off with clean cloth. EcoEXEMPT IC2 may be diluted with water or oil and applied with conventional application equipment including, but not limited to, compressed air sprayers and power sprayers. When diluting with water, prepare only the amount needed for immediate use and maintain agitation during use. Do Not Store Spray Solution Overnight. For oil dilutions that are applied in food handling establishments, a deodorized petroleum oil which conforms to CFR 21 (especially section 172.884) is required (such as Exxon Isopar M, Ashland Low Odor Base Solvent, or the equivalents). Tank mix applications must be made in accordance with the more restrictive of label limitations and precautions. No label dosages may be exceeded. This product cannot be tank mixed with any product with label prohibitions against such mixing.

Advantages of EcoEXEMPT IC-2

Quick knockdown/kill
Residual protection
Flexible label
Indoor/outdoor use
Broad spectrum
Non-staining
Highly versatile
Low aquatic toxicity
For conventional, misting and fogging equipment
Great for mosquito control programs
New softer botanical scent
May be used for on-animal applications

Do not apply directly to house plants. Cover/avoid any pools or aquaria prior to spraying.

GENERAL PEST CONTROL with Eco EXEMPT IC - 2:

To control accessible, exposed stages of crawling insects including, but not limited to, Ants, Cockroaches, Cadelles, Cigarette Beetles, Dark Mealworms, Dried Fruit Beetles, Drugstore Beetles, Confused Floor Beetles, Grain Mites, Fowl mites, Mites, Red Flour Beetles, Rice Weevils, Saw-toothed Grain Beetles, Spiders, Spider Beetles, Termites, Yellow Mealworms in sites that include, but are not limited to, apartments, homes, restaurants, food processing plants, industrial installations and warehouses, dilute at the rate of up to .5 to 6 fluid ounces of EcoEXEMPT IC2 per gallon of water (use lower rate for maintenance service and higher rates for active infestations). Thoroughly spray non-visible areas where these insects are usually found with special attention to cracks and crevices, niches, dark corners, drains and other harborage sites. To prevent potential discoloring, do not spray on visible areas (i.e. baseboards, door frames, walls, etc.) and wipe away excess. Food processing operations may continue when EcoEXEMPT IC2 is applied as a surface, spot or crack and crevice treatment in accordance with the directions and precautions given above.

FOGGING with Eco EXEMPT IC - 2:

To control crawling and flying insects (Flies, Moths, Fruit Flies, etc) in sites that include, but are not limited to, food processing plants, (INCLUDING USDA INSPECTED FACILITIES), industrial installations, animal quarters (cattle barns, horse barns, poultry barns, swine houses, zoos and warehouses), EcoEXEMPT IC2 may be applied as a space spray through conventional fogging equipment. Cover or remove exposed food and cover food-handling surfaces in edible product areas of food handling establishments. Also cover sensitive surfaces (plastics, etc). Close and shut off air conditioning or ventilating equipment. Mix 4 to10 ounces of EcoEXEMPT IC2 insecticide with sufficient oil to equal 1 gallon of diluted spray. (It is recommended to use lower rates in most food facility applications). Apply at a rate of 1 to 3 fluid ounces per 1000 cubic feet, filling the room with mist (or fog, if thermal equipment is used). Keep area closed for at least 15 minutes. Vacate treated area. Ventilate before reoccupying. Fogging may create slippery conditions on painted floor surfaces. Retreat if reinfestation occurs. The product does contain plant oils that are inherently fragrant. When used in confined spaces, prolonged exposure to the fragrance may be objectionable to some individuals.

Eco PCO WP X Product Label

Eco PCO WP X Material Safety Data Sheet (MSDS)

EcoPCO WP X - 1 lb

EcoSMART's line of safe pesticides for home use is now available in the form wettable powder for residual control in and around residential, commercial and industrial buildings. EcoPCO is a broad label insecticide containing the same natural active ingredients as other EcoSMART products. EcoPCO WP combines three botanical insecticides in one package that is just as efficient as other chemically-based insecticides.

Why Should You Use EcoPCO WP X?

EcoPCO WP∙X provides excellent control over indoor and outdoor pests without the risks associated with chemical-based pesticides.

Directions for EcoPCO WP X Use

EcoPCO WP∙X is a wettable powder that must be diluted in water and applied using hand-operated or power sprayers. Thoroughly clean application equipment before using. Fill applicator tank half full with water. Add the recommended amount of EcoPCO as stated in the product label. Active ingredient concentrations may vary from 0.0125% to 0.05%, depending on the target pest/s and the severity of infestations. Agitate the tank to ensure an even mixture. Tanks should be agitated regularly to maintain satisfactory suspension.

FOR INDOOR APPLICATIONS: Spray pressure should not exceed 50 psi. Apply as a coarse, low-pressure spray to infested sites. Inject cracks, crevices and voids using injectors. Treat interior and exterior surfaces of cabinets, baseboards, sinks, closets, storage areas, appliances, plumbing and other entry/exit sites. Please read the product label for directions on how to conduct treatments for specific pests.

FOR OUTDOOR APPLICATIONS: Using hand or power sprayers, apply as a residual treatment to outdoor surfaces such as screens, window sills, doors, porches, patios, garages and other areas where pests are found. The product can be applied to landscaped areas and ornamental plants or in barrier treatments around and adjacent to buildings. Please refer to the product label for instructions on how to conduct outdoor treatments.

Where to Apply EcoPCO WP X

EcoPCO is for use inside, on, and around residential, commercial, institutional and industrial buildings. Areas of use include apartments, homes, hotels, motels, schools, hospitals, nursing homes, factories, stores, warehouses, restaurants, supermarkets, zoos, food processing and handling establishments and transportation equipment such as aircraft, buses, trailers, trucks, trains, ships and vessels.

Fast Out CS Foam Product Label

Fast Out CS Foam Material Safety Data Sheet (MSDS)

FastOut CS Foam Tech Note

FastOut CS Foam

FastOut CS Foam is a non-repellent insecticide that features SmartCap microencapsulation technology. Developed by Whitmire Micro-Gen, SmartCap bolsters the performance of residuals, leading to fast kills and effective control of infestations. FastOut contains microencapsulated Cyfluthrin in a non-repellent foam solution with an exceptional expansion rate. Available in a ready-to-use bottle that provides easy delivery of foam to cracks and voids for quicker control of target pests.

Why Should You Use ?

FastOut CS is a ready-to-use product for foam applications. No measuring, no mixing and no equipment necessary. Just point and shoot, all your pest problems are gone with FastOut.

Directions for Use

Shake well before use. FastOut CS can be used for crack and crevice treatments or spot treatments to treat infestations in cracks and crevices, voids, or in exposed areas. The product is intended for support treatments in localized areas in structures and cannot be used as a substitute for stand-alone termite treatments. With the attached injector tube and tip, hold the actuator for about 8 seconds and dispense the product thoroughly in treatment areas. Application to exposed areas must be limited to sites with minimum exposure. When treating exposed areas, allow the foam/residue to dissipate and clean the area afterwards. Inject the product through structural voids, insect galleries, nests and other insect hiding spots. Treat trails, entry/exit sites and other areas where pests are found entering/exiting structures. Please refer to the product label for specific use directions.

Where to Apply

FastOut CS is for use in: Apartments, Homes, Hospitals, Hotels, Food Handling Establishments, Restaurants, Hotels, Hospitals and Nursing Homes (Non-patient Areas), Motels, Hobby Greenhouses, Interiorscapes, Office Buildings, Schools, Transportation Equipment (Buses, Boats, Ships, Trains, Planes) and Warehouses and Other Commercial and Industrial Buildings.

PT Wasp Freeze Product Label

PT Wasp Freeze Material Safety Data Sheet

PT Wasp Freeze Aerosol - 17.5 oz.

Wasp Freeze is a unique product designed to kill stinging insects indoors and outdoors. PT Wasp Freeze Aerosol provides lightning-fast action to prevent bees and wasps from releasing pheromones that attract other stinging insects. When released, the powerful mist extends up to fifteen feet, keeping you safe from attacks. In addition, provides a short term residual control to ensure that the pests are eliminated in their nests.

Why Should You Use?

Wasp Freeze delivers a swift blow to stinging insects while reducing the chances of getting stung.

Directions for Use

Align the actuator towards the direction of treatment. For overhead treatments, align the actuator opening with the mark on the valve cup. Do the opposite for downward treatments. Hold the container upright and spray towards the nests or pests at a distance of 6 to 15 feet. Apply directly into nest openings for 6 to 8 seconds. Thoroughly treat nests until damp. Contact as many insects as possible. For best results, conduct treatments early in the morning or late in the day. Consult the product label for more information.

Where to Apply

Wasp Freeze is labeled for use outdoors on flying insects.

Masterline Bifenthrin 7.9 Product Label

Masterline Bifenthrin 7.9 Material Safety Data Sheet (MSDS)

Masterline Bifenthrin 7.9 Brochure

Masterline Bifenthrin 7.9

Univar's Masterline Bifenthrin Insecticide/Termiticide offers superior control of indoor and outdoor pests such as termites, cockroaches, ants and many more. Its active ingredient, Bifenthrin, is popular for its broad spectrum of control and excellent residual properties. With Masterline's powerful residual formulation, expect effective and lasting control the toughest pest infestations in and around your homes.

Why Should You Use?

Masterline Bifenthrin 7.9 targets several indoor and outdoor pests. This highly versatile product is the solution to all your indoor and outdoor pest problems.

Directions for Use

Masterline Bifenthrin 7.9 is an emulsifiable concentrate intended for water dilutions. Finished solutions can be used for general surface treatments, crack and crevice treatments or spot applications. Finished emulsions may be converted to foam using suitable foaming agents. Insect growth regulators and other pesticides may be tank mixed together with the product unless explicitly prohibited by the product label. Masterline is excellent for use in treating termite infestations. Technicians must be familiar with termite control techniques such as trenching, rodding, sub-slab injection and coarse spray application for effective use of the product. Apply finished emulsions using appropriate equipment such as hand held or powered sprayers, brushes, foam applicators and other similar application equipment. Carefully read the product label for application directions, dilution rates and application rates.

Where to Apply

Masterline controls pests indoors and outdoors on residential, commercial, institutional, public, commercial and industrial buildings. Areas of use also include lawns, ornamental plants, interiorscapes, recreational areas and athletic fields.

Microcare Product Label

Microcare Material Safety Data Sheet (MSDS)

Microcare Aerosol Pyrethrum - 20oz

Microcare Pressurized Pyrethrum Spray features SmartCap Microencapsulation Technology for quicker kills and lasting residual control of target pests. SmartCap enhances the performance of residuals by containing the active ingredient in microscopic capsules and protect it from contaminants. These microcapsules in turn, provide excellent adhesion to insect exoskeletons and surfaces. The active ingredient is transferred to other insects and released as pests preen themselves. Microcare kills several household pests and is perfect for use as a contact, space, surface, spot or crack and crevice spray.

Why Should You Use?

Microcare is a broad label insecticide that kills crawling and flying insects. A perfect product to use in sensitive conditions in residences due to its low toxicity.

Directions for Use

Shake well before use. Apply directly to exposed pests and surfaces. Application in food handling establishments is limited to crack and crevice treatments only. Use Microcare with the supplied actuator and injection tubes for crack and crevice treatments. Place injector tips into cracks and crevices and depress the actuator. Apply by moving the injector tip one lineal foot per second for heavy infestations and 3 lineal feet per second for light infestations.

FOR ANTS, COKCROACHES, CRICKETS, FIREBRATS, SILVERFISH, SPIDERS: Treat infested areas, cracks and crevices, voids, tunnels, moist areas, around pipes and openings, under sinks, refrigerators and stoves, behind cabinets, shelves and drawers, walls, floors and doors. Contact insects as much as possible. Repeat treatments once a week.

FOR CARPET BEETLES, LICE, TICKS, AND FLEAS: Vacuum carpets, rugs, furniture, closets, cushions and floor coverings to capture loose insects. Seal and dispose of used vacuum bags properly. Treat infected areas thoroughly and evenly.

FOR OUTDOOR SURFACE AND PERIMTER TREATMENTS: Spray outside surfaces of screens, window frames, doors, light fixtures and other surfaces where insects are seen congregating. Treat a band of soil measuring 6 to 10 feet wide around and adjacent of structures to create a barrier against ants, cockroaches, crickets, earwigs and scorpions. Treat building foundations to a height of 2 to 3 feet where pests may find entrance.

Where to Apply

Microcare is for use in transportation equipment, food handling and processing plants, campgrounds, food storage areas, homes, hospitals, hotels/motels, kennels, nursing homes, office buildings, picnic areas, residences, restaurants, schools, supermarkets, warehouses and other residential, commercial, industrial establishments.

Pro Citra DL Product Label

Pro Citra DL Material Safety Data Sheet (MSDS)

Pro Citra DL Botanical Insectcide (Orange Oil) - 17.5 oz.

From Whitmire Micro-Gen's line of all natural insecticides, Pro Citra contact kill aerosol offers the same performance as synthetic insecticides without the toxicity. This natural, broad label product targets several common household insects such as ants, roaches and termites. Its active ingredient is d-Limonene, a botanical insecticide with very low toxicity to humans. This makes the product ideal for use in sensitive accounts such as schools, nursing homes and hospitals.

Why Should You Use?

Pro Citra does not contain synthetic active ingredients that are usually toxic.

ProCitra-DL is a botanical-based insecticide ideal for Crack and Crevice and spot treatment in both food and nonfood handling areas. It controls a wide variety of pests including ants, cockroaches, fleas and spiders and may be used in sensitive accounts such as schools, nursing homes, food processing plants, hospitals and government buildings.

Directions for Use

Pro Citra-DL is intended for crack and crevice and/or spot treatments only in food and non-food handling areas. Use this product with the supplied actuator and injection tubes. Place injector tip into cracks, crevices and voids where insects typically hide. Move injector tip along small openings at the rate of 3 linear feet per second for light infestations and one linear foot per second for heavy infestations. Treat close voids at the rate of one to five seconds per three cubic feet. For spot treatments, hold the container upright and direct the nozzle 12 inches from the surfaces. Treat areas under sinks, around pipes, refrigerators, stoves, washing machines, areas around cabinets, baseboards, floor drains, utility boxes and other infested sites. Contact insects as much as possible. Reapply as necessary. Read the product label for more information.

Where to Apply

Pro Citra Botanical Insecticide is for indoor use in apartments, homes, hotels, hospitals, nursing homes, schools, day care centers, food storage areas, restaurants, food processing plants, supermarkets, utilities, warehouses, modes of transport (buses, trains, trucks, ships), and other commercial, institutional and industrial buildings.

 Product Label

 Material Safety Data Sheet (MSDS)

CB Stingray Wasp & Hornet Jet Spray - 17.5 oz.

Stingray is a powerful contact insecticide that stops bees, wasps and hornets dead in their tracks. Featuring two pyrethroid active ingredients, stinging insects are killed in seconds. Designed for control in safe distances, Stingray releases a 20-foot jet of pyrethroid-laden spray. The product also leaves a lethal residue that kills wasps and hornets as they return to their nests.

Why Should You Use?

To avoid stings, Stingray is designed for lightning fast, long distance kills.

Directions for Use

Shake well before using. Hold the can upright with the nozzle pointed away from face or persons. Spray directly to insects. Treat nests early in the morning or late in the evening where insect activity is minimal. Stand at a safe distance and direct the nozzle opening towards nests. Spray thoroughly until nests are damp. Treat congregation areas and entry points where these pests may enter structures such as cracks and crevices, attics, crawlspaces, under eaves, screens, windows, doors, patios, sills and ledges. Do not overspray. Wait for 24 hours before removing treated nests.

Where to Apply

Stingray is for use both indoors and outdoors to kill stinging insects and treat nests. Food and Non-Food Areas including but not limited to Restaurants, Grocery Stores, Bakeries, Food Manufacturing and Processing Establishments, Food Warehousing Establishments, Schools, Warehouses, Office Buildings, Theatres, Garages, Hotels, Motels, Kennels, and Hospitals.

Product Label

Material Safety Data Sheet (MSDS)

Suspend SC Brochure

Suspend SC - 1 Pint

Suspend SC provides effective knockdown and long term residual control of over fifty pests. Very low usage rates makes the product safe to use in food handling areas, mattresses, furniture, cushions and other surfaces where sensitivity is an issue. Suspend SC residues have no odor or visible residues and will not damage surfaces where water alone causes no damage.

Why Should You Use?

Suspend is more economical, flexible and effective compared to other concentrates.

Directions for Use

Mix Suspend with water following the dilution rates in the product label. Active ingredient concentration in solutions range from 0.01% to 0.06%, depending on the target pest/s. Apply using hand pressurized or power operated sprayers. Shake well before using. Partially fill applicator tanks 1/2 full with water before adding the proper amount of concentrate. Agitate the tank and add the remaining volume of water. Re-agitate to obtain a uniform mixture. The product may be tank mixed with currently registered pesticides and insect growth regulators unless prohibited by the product label. Solutions can be converted to foam used in treating structural voids. Mix Suspend SC with a foaming agent following the mixing instructions as indicated in the foaming agent label.

Use finished solutions for crack and crevice, spot and surface treatments indoors. Use 0.25 to 1.5 ounces of Suspend per gallon of water to treat 1,000 square feet of surface. Apply as a coarse low pressure spray to cracks, crevices, voids and other sites where insect live, feed and breed. Apply as directed in the product label.

Use Suspend SC as a residual or broadcast spray to perimeters, lawns, grounds, landscapes and ornamental plants. Apply as a coarse, low-pressure spray to outdoor building surfaces, porches, patios, eaves, screens, window frames, garbage dumps, lawns and ornamental plants. Treat a band of soil 6 to 10 feet wide around and adjacent to buildings and structures. Treat foundations up to a height of 3 feet.

Control wood-damaging insects by applying spray or foam solutions having 0.06% Deltamethrin. Using the appropriate application equipment, apply solutions to infested surfaces and damaged wooden structures. Inject solutions inside termite carton nests and damaged wood. Drill holes if necessary. Apply as a coarse fan spray to exposed insects and infested surfaces.

For broadcast application in lawns, apply using a minimum of 2 gallons per 1,000 square feet. Use higher volumes for adequate coverage of thick foliage. Apply thoroughly and uniformly over turfgrass and ornamentals.

Where to Apply

Suspend SC is for residential, commercial, industrial and institutional control of the listed pests. Areas of use include apartments, bakeries, bottling facilities, breweries, cafeterias, canneries, food manufacturing and processing plants, food service establishments, granaries, hospitals, hotels, kitchens, laboratories, nursing homes, office buildings, restaurants, schools, warehouses and transports such as aircraft, buses, mobile homes, ships, trailers and trucks.

Tempo SC Ultra Product Label

Tempo SC Ultra Material Safety Data Sheet (MSDS)

Tempo SC Ultra - 8 oz.

Tempo SC Ultra is an odor less and stainless product. Tempo SC is concentrated formula that is mixed with water before using. Tempo SC Ultra is used both indoors and outdoors. One bottle of Tempo Ultra makes up to 30 gallons. When using this product we recommend that you use a pest control product tool such as Chapin Premier 1 or 2 Gallon sprayer.

Application with Tempo SC Ultra

Apply where pests have been seen or found, or can find shelter (in and around buildings and structures, on residental, commercial and recreational areas of turf, on ornamentals in landscapes and interior plantscapes). Makes up to 30 gallons of finished spay solution for indoors. Treats up to 30,000 sq ft. outdoors. Mix the appropriate amount of Tempo SC with water. May tank mix with other pesticides currently registered for similar uses. Reapply every 7 to 10 days, if needed. For turf, reapply if needed, but not more than 6 times per year.

Product Label

Material Safety Data Sheet (MSDS)

Tempo Ultra WP - 420 grams

Tempo Ultra WP has a fast knockdown kill, meaning the minute they come in contact with the insecticide they will die. Tempo Ultra WP will leave no to almost no residue when sprayed and odorless. Tempo Ultra WP will last up to 30 days, continuously killing pests. Tempo Ultra WP can be used indoors and outdoors as well as food handling facilities.

General Household Pests: Ants (except Pharaoh), Bedbugs, Carpet Beetles, Centipedes, Clothes moths, cluster fly, Cockroaches, Crickets, Darling beetles, Earwigs, Firebrats, Millipedes, Pillbugs, Silverfish, Sowbugs, Spiders, Flies, Gnats, Hornets, Midges, Moths, Wasps, Yellow Jackets

FOR USE IN:

Areas where pest have been seen or found, or can find shelter. In and around buildings and structures. One residential, commercial and recreational areas if turf. On ornamentals in landscapes and interior plant scapes.

Mixing Direction for Tempo Ultra WP:

Mix the appropriate amount of Tempo Ultra WP with water. May use tank mix with other pesticides currently registered for similar uses, unless specifically prohibited. Use in general surface spot, mist, or crack and Crevice application. Re-apply every 7 to 10 days, in needed. Make sure to cover or remove all food processing and handling equipment before treatment.

Product Label

Material Safety Data Sheet

Tengard SFR One - 1 Quart

Tengard SFR One's active ingredient has the ability to kill over 75 different types of pest. The permethrin in Tengard SFR One has a long lasting and increases effective. Tengard SFR One can be used indoors and outdoors, when used outdoors it dispersed in the soil and establish a barrier between the structure and the termites in the soil. Tengard SFR One is a pesticide that kill pest but also as a prevention.

Mix the termiticide use dilution in the following manner:

1. Fill tank 1/4 to 1/3 full.
2. Start pump to begin by-pass agitation and place end of treating tool in tank to allow circulation through hose.
3. Add appropriate amount of Tengard SFR. (See Rate/Volume Conversion Chart)
4. Add remaining amount of water.

Application Volume: To provide maximum control and protection against termite infestation apply the specified volume of the finished water emulsion and active ingredient as set forth in the directions for use section of this label. If soil will not accept the labeled application volume, the volume may be reduced provided there is a corresponding increase in concentration so that the amount of active ingredient applied to the soil remains the same.

NOTE: Large reductions of application volume reduce the ability to obtain a continuous barrier. Variance is allowed when volume and concentration are consistent with label directed rates and a continuous barrier can still be achieved.

Trebor Triple Seal Plug

Trebor Triple Seal Plug are one of the most effectively used tools out in the pest control industry today. Most people are unaware of the fact that insects like to live inside walls and cervices. Insects also like to lay their eggs in dark and damp areas such as inside the walls. The best way to solve this problem is to use a fog or foam method. Using a drill, drill a hole inside on the wall and using the termiticides. Afterwards plugging the Trebor Triple Seal Plug will prevent and insect from trying to come out.

Trebor Triple Seal Plug are used after a hole is drilled into the cement for chemical termiticides.

CY-Kick Aerosol Product Label

CY-Kick Aerosol Material Safety Data Sheet (MSDS)

CY-Kick Aerosol - 17.5 oz.

CY-Kick Aerosol is a residual insecticide that kills pests instantly. CY-Kick aerosol is used for cracks and crevices, spot, and void treatments. CY-Kick residual aerosol, with Cy-Kick CS's unique microcapsule suspention technology, leaves a flim on a surface applied as a residual to keep on killing pests for weeks. Since with Cy-Kick's low odor fomula, it is one of the best and perfect products for residential, food handling, and sensitive areas of indoor treatment.

Advantages of Cy-Kick Aerosol

Excellent knockdown and residual properties
Broad spectrum activity
Ideal for use in both residential and commercial accounts
Great for wood injection

Indoor Treatments with CY-Kick Aerosol:

Apply as a Crack and Crevice treatment using the prescribed dosage into cracks, crevices, and void spaces where insects may be harboring. These may include, but are not limited to, openings aroind pipes and sinks, under refrigerators, behind baseboards, washing machines, stoves, cabinets, sewers, floor drains, and meter boxes. Spot treatment may also be made to areas including, but not limited to: storage areas, closets, around water pipes, doors and windows, around refrigerators, cabinets, sinks, stoves and other equipment, shelves, drawers, and similar areas.

Apply as a Crack and Crevice treatment or spot treatment into infested and egg laying sites near pet resting areas including, but not limited to: cracks and crevices of baseboards and around door and window frames.

Apply as a Crack and Crevice treatment into cracks, crevices, and voids where ants may be traveling and/or harboring, including, but not limited to, around doors, window frames, wall voids adn other structural cracks and crevices. Spot treatment may also be made to areas including, but not limited to: storage areas, closets, around refrigerators, cabinets, sinks, stoves and other equipment, shelves, drawers, and similar areas.

Apply as a Crack and Crevice treatment into cracks and crevices of baseboards, door frames, bookcases and other harborage sites. Spot Treatment may also be made to areas including, but not limited to: storage areas, closets, around water pipes, doors and windows, around refrigerators, cabinets, sinks, stoves and other equipment, shelves, drawers and similar areas.

Apply as a Crack and Crevice treatment into cracks, crevices and/or voids where these areas may include, but not limited to: cracks and crevices in cabinets and pantries, wall voids, around window and door frames, under siding and in machinery. Spot treatment may also be made to areas including but not limited to: storage areas, closets, around water pipes, doors and windows, around refrigerators, cabinets, sinks, stoves and other equipment; shelves, drawers and similar areas.

CB Borid Boric Acid Dust Product Label

CB Borid Boric Acid Dust Material Safety Data Sheet (MSDS)

How to Apply Dust Insecticides

CB Borid Boric Acid Dust - 25 lbs.

Proven Control of Crawling Insects in Commercial and Residential Locations

CB Borid Boric Acid Dust is a natural product that uses a contact kill and knock-down method like all other dusts. CB Borid Boric Acid Dust provides long-term treatment and remains effective as long as it remains dry and accessible to insects. Depending on the pest, CB Boric Borid Acid Dust will either kill the pest the minute they touch or it will allow the pest to carry the dust back to its colony, exposing the colony to the dust. CB Borid Boric Acid can be used either indoors or outdoors; simply apply small amounts using a tool or application tip. No dust should be visible, so make sure to brush the remaining dust into the cracks or crevices. When using CB Borid Boric Acid Dust, remember to be careful around children or pets.

Useful Tips You May Need to Know

The dust application is simple. However, when using dust, please be cautious, especially when children and pets are present. Use dust only in areas where they cannot reach. Apply lightly and uniformly to infested area. Do NOT overuse dust. The large amount of dust would repel insects. We recommend applying CB Borid Boric Acid Dust with a Bellow duster or a Centrobulb duster for best application.

For Use in and around: Homes, Restaurants, Grocery Stores, Schools, Warehouses, Mobile Homes, Hotels, Offices, Apartments, Attics, Nursing Homes, Ships, Yachts, Buses, Kennels, Zoos, New Building Construction, Sewers and Hospitals

Apply CB Borid Boric Acid Dust liberally in areas where cockroaches hide or nest:

- Under and behind appliances.
- In plumbing voids accessible through holes, around plumbing and drains.
- In void areas under kitchen and bathroom cabinets (Note: Many cabinets have a gap at the top of the kickplate which offers easy access. If not, drill a small hole at the top of the kickplate).
- In drawer wells of cabinets.
- In cracks around windows, doors, baseplates, fixtures and cabinets.
- In utility rooms, under and behind hot water heaters, washers and dryers. Be sure to dust plumbing voids.
- In attics, around the perimeter and vent pipes, above kitchens and baths.
- Around the perimeter of dropped ceilings.
- Into pits of elevator sharfs, dumbwaiters and trash chutes.
- Under and behind pallets and boxes in storerooms.

DIRECTIONS FOR USE OF CB BORID BORIC ACID

WITHIN FOOD AREAS AND NON-FOOD AREAS OF FOOD HANDLING ESTABLISHMENTS FOOD HANDLING ESTABLISHMENTS:

In places other than private residences in which exposed food is held, processed, prepared, or served, care should be taken to avoid depositing the product onto unwanted areas and items. Avoid contaminating food or food processing surfaces with CB Borid Boric Acid Dust.

APPLICATIONS OF CB BORID BORIC ACID IN THE FOOD AREA OF FOOD HANDLING ESTABLISHMENTS OTHER THAN AS A CRACK AND CREVICE TREATMENT ARE NOT PERMITTED.

Apply CB Borid Boric Acid Dust in small amounts directly into cracks and crevices using a bellows duster or other suitable equipment capable of applying insecticide directly. Includes areas for receiving, storage, acking (canning, bottling, wrapping, boxing), preparing, edible waste storage, and enclosed processing systems (mills, dairies, edible oils, syrups). Serving areas, when food is exposed and facility is in operation, also would be considered a food area.

SERVING AREAS:

Facilities where prepared foods are served, such as dining room, but excluding areas where food may be prepared or held. Apply CB Borid Boric Acid Dust as a spot treatment to selective surfaces such as baseboards or under elements of constructions into cracks and crevices. Avoid treating surfaces likely to be contacted by food. (Do not apply CB Borid Boric Acid Dust when facility is in operation or foods are exposed.)

NON-FOOD AREAS:

Includes garbage rooms, lavatories, floor drains (to sewer entries and vestibules), offices, locker rooms, machine rooms, boiler rooms, garages, mop closets, and storage (after canning or bottling). Apply to baseboard areas, around water pipes, surfaces behind and beneath sinks, lockers, tables, pallets, and similar areas where insects hide or through which they may enter.

SEWER TREATMENT:

Apply CB Borid Boric Acid Dust using portable blowers or air pressure tanks at a rate that does not exceed 8 pounds per 3,000 square feet.

PRETREATMENT OF NEW CONSTRUCTION (Preventive treatment for cockroaches and drywood termites):

Apply CB Borid Boric Acid Dust to baseplates and plumbing voids at the rate of 4 pounds per 1,000 square feet. In attics, apply powder around perimeter of attics and around vent stacks at the rate of 4 pounds per 1,000 square feet.

POULTRY HOUSES-TO CONTROL DARKLING BEETLES:

Remove birds before applying product. Apply CB Borid Boric Acid Dust at the rate of 1 to 2 pounds per 100 square feet over old litter or soil surface of the poultry house. Also apply to the posts, walls, framing, and insulation of the poultry house. Do not apply CB Borid Boric Acid Dust directly to manure. Evenly spread fresh litter a minimum of four inches over all treated floor surfaces before introducing birds. Reapply CB Borid Boric Acid Dust after each grow-out period or after each sanitizing and cleaning of the poultry containment area in order to have good beetle control.

Demon WP Product Label

Demon WP Material Safety Data Sheet (MSDS)

DEMON WP Insecticide - 1 Envelope

Syngenta's Demon WP is an odorless, water-soluble insecticide that delivers quick knockdown and lasting residual control of over 30 pests. The product contains 40% Cypermethrin, one of the most reliable pyrethroids to control indoor and outdoor pest infestations. Demon WP is available in convenient 1-lb jars with scoops and in envelopes which greatly reduces the efforts of mixing. One pound of the product makes up to 50 gallons of finished solution.

Why Should You Use DEMON WP?

Demon WP is a broad label insecticide providing fast kill and long-term residual control at a lesser cost.

Directions for DEMON WP Use

Demon WP is in the form of soluble powder that is intended for water dilutions. Following the dilution rates found in the product label, add measured amounts of Demon WP to water to produce the desired amount of solution. Compatible pesticides may be mixed together with the product unless prohibited by the product label. Use the finished solutions for surface treatments, crack and crevice treatments or spot applications. Apply solutions using handheld or powered sprayers, crack and crevice injectors or paint brushes.

Permitted areas of use in nonfood/nonfeed areas include, but are not limited to: aircraft (cargo and non-cabin areas only), apartment buildings, boiler rooms, buses, closets, correctional facilities, decks, entries, factories, fencing, floor drains (that lead to sewers), food granaries, food grain mills, food manufacturing, processing and serving establishments; furniture, garages, garbage rooms, greenhouses (non-commercial), hospitals (non-patient areas), hotels and motels, houses, industrial buildings, laboratories, livestock/poultry housing, landscape vegetation, locker rooms, machine rooms, mausoleums, mobile homes, mop closets, mulch, nursing homes, offices, patios, pet kennels,porches, railcars, restaurants, storage rooms, schools, sewers (dry), stores, trailers, trees, trucks, utility passages, vessels, vestibules, warehouses, wineries, and yards.

Repeat treatments as necessary, but not more than once every 7 days.

Where to Apply DEMON WP

For use by commercial applicators in, on and around buildings and structures for the control of listed pests, including on lawns, ornamental trees and shrubs around residential, institutional, public, commercial, agricultural and industrial buildings; and parks, recreational areas and athletic fields.

Demon WP may be used as a general surface, crack and crevice and/or spot treatment in the non-food areas of food handling establishments. Examples of non-food areas include garbage rooms, lavatories, floor drains (to sewers), entries and vestibules, offices, locker rooms, machine rooms, boiler rooms, garages, mop closets, and storage (after canning or bottling).

Do not use Demon WP in food areas of food handling establishments, restaurants or other areas where food is commercially prepared, processed or served. Food areas include areas for receiving, storage, packing (canning, bottling, wrapping, boxing), preparing, edible waste storage and enclosed processing systems (mills, dairies, edible oils, syrups). Serving areas (when food is exposed and facility is in operation) also would be considered a food area.

Professional Bee Suit

This Professional Bee Suit is ultra comfortable, lightweight for protecting professionals and homeowners against stinging insects such as bees, hornets, yellow jackets, wasps and spiders while a treatment. This Professional Bee Suit is made from a 100% cotton material.

The Professional Bee Suit includes coveralls with elastic wrists and ankles, white vented helmet, square folding veil that sets over the helmet, as well as a self-supporting zippered veil as a separate option. 

This suit has two helmet options. The first includes a self-supporting double neck zippered veil that is attached to the suit. As an secondary option, a traditional helmet and veil is included with the suit. The self-supporting veil is taken off and replaced with the helmet and veil. The traditional veil is pull-string that crosses in front of the chest and tied in the back for closure. Keep in mind that the traditional helmet and square folding veil does not attach to the zipper on the suit. The zipper is there for a double neck zipper for the self supporting veil. 

Detailed Pictures:

Talstar Pro Product Label

Talstar Pro Material Safety Data Sheet (MSDS)

Talstar Pro (formerly Talstar One) - 1 pint

Talstar Pro formerly known as Talstar One's name means one professional product for all control. Talstar Pro is able to target over 75 different pests and is great for in and outdoor uses. Talstar Pro is a long lasting residual that lasts up to 3 months, it is odorless, leaves a clear residual, leaves no stain, non- irritating on the skin and does not break down easily with rain. Talstar Pro is also well known for its effectiveness with termites. With Talstar Professional insecticide you know you'll get the job done right every time. That's because it gives you superior, long-lasting control of the toughest general pests and termites. In fact, Talstar is effective on more than 75 pests. Plus, it's approved for multiple use-sites, so you can use it almost anywhere - indoors, outdoors, industrial, commercial and food-handling areas.

Proven, flexible protection indoors. Talstar Professional is an effective insecticide that's tough on ants and general household pests. In fact, its multi-use label makes it so versatile, you can trust it to provide effective indoor control of bed bugs, fleas, flies, scorpions, spiders and cockroaches almost anywhere, including: industrial and commercial sites, kitchens, restaurants, supermarkets and food processing plants.

Reliable, long-lasting protection outdoors. For outside and perimeter jobs, Talstar Professional is labeled for a broad spectrum of perimeter pests and provides long-lasting residual control of everything from fleas, ticks and flies to mosquitoes, mites, millipedes and termites.

Plus, it's non-staining and contains no odorous or plant-damaging solvents. Once it dries, it is virtually impossible to tell where it has been sprayed. Even better, it leaves no unsightly residues and causes no known phytotoxicity.

Put an end to fire ant colonies fast. Talstar Professional can even be used to destroy fire ant colonies. Simply drench the mound for 95% control in 24 hours, and then apply a broadcast application to eliminate re-infestation of invading fire ants for up to six months.

To control Bees, Wasp, Hornets, and Yellow-Jackets apply a 0.06% emulsion. Application should be made in the late evening when insects are at rest. Spray liberally into hiding and breeding places, especially under attic rafters, contacting as many insects as possible. Retreatment may be necessary to achieve and/or maintain control during periods of high pest pressure. Repeat application is necessary only if there are signs of renewed insect activity. Important: Do not apply emulsion until location of heat pipes, ducts, water and sewer lines and electrical conduits are known and identified. Caution must be taken to avoid puncturing and injection into these structural elements. Do not apply into electrical fixtures, switches, or sockets.
In the home, all food processing surfaces and utensils in the treatment area should be covered during treatment or thoroughly washed before re-use. Remove pets, birds, and cover aquariums before spraying. Do not permit humans or pets to contact treated surfaces

Talstar Pro formerly known as Talstar One's name means one professional product for all control. Talstar Pro is able to target over 75 different pests and is great for in and outdoor uses. Talstar Pro is a long lasting residual that lasts up to 3 months, it is odorless, leaves a clear residual, leaves no stain, non- irritating on the skin and does not break down easily with rain. Talstar Pro is also well known for its effectiveness with termites. With Talstar Professional insecticide you know you'll get the job done right every time. That's because it gives you superior, long-lasting control of the toughest general pests and termites. In fact, Talstar is effective on more than 75 pests. Plus, it's approved for multiple use-sites, so you can use it almost anywhere - indoors, outdoors, industrial, commercial and food-handling areas.

Carpenter Bees Trap

With its relatively simple construction, this carpenter bee trap is unusually effective. Made from wood and empty plastic bottles, the trap requires no bait to lure the carpenter bees in. Cheap yet effective, these traps are very easy to maintain. Once installed, these traps continually lure carpenter bees for years!

Why Should You Use?

The Carpenter Bee Trap is a low-cost carpenter bee solution for all your carpenter bee problems. It is a simple trap made from wood and plastic bottles. Carpenter bees are fooled by the trap's hole which looks like the entrance holes of carpenter bee nests.

These effective traps are from eco-friendly materials that last for years.

Directions for Use

Screw an empty plastic bottle at the bottom of the trap to contain the lured bees. Replace the receiving bottle when full of dead bees. Reuse the bottle or use any bottle that fits on the trap socket. Poke drain holes at the bottom of the plastic bottle before installing them into the traps.

Where to Use

Place the traps on areas where carpenter bees are sighted. Traps can be installed directly over existing carpenter bee nests. Carpenter bees prefer to build their nests on areas that are exposed to sunlight. It is recommended to install these traps building areas that have direct access to the sun's light.

Cynoff dust Material Safety Data Sheet (MSDS)

How to Applying Dust Insecticide

Cynoff Dust Insecticide

Cynoff dust contains Zeta Cypermethrin, a new active ingredient, designed for quick kill and long-lasting residual.

Cynoff is available in a unique 16 oz. container which can be used to apply the dust or to fill other application equipment. With an anti-clumping formula and good float properties, Cynoff dust provides even insecticide coverage wherever it's applied.

Please read the product label for application instructions and the recommended application rates. Pestmall offers Centrobulb Dusters and Bellow Dusters needed to apply Cynoff Insecticide Dust Insecticides.

Please refer to and follow the instructions on the Cynoff Dust product label.

Eco PCO AR-X Aerosol Material Safety Data Sheet (MSDS)

Eco PCO AR-X Aerosol Supplemental Label

Eco PCO AR-X Aerosol - 17 oz.

EcoPCO AR-X Multi-Purpose Insecticide is a specifically formulated contact aerosol for the professional pest control operator for use in homes, offices, hotel, motels, schools, hospitals, nursing homes, day-care centers, factories, warehouses, stores, supermarkets, restaurants, food handling establishments, commercial or institutional kitchens, food processing plants, bottling plants, and transportation equipment (automobiles, buses, trucks, trailers, boats, ship and trains).

Advantages of Eco PCO AR-X Aerosol

- Quick knockdown & kill
- Microencapsulation Effect: Long residual protection
- Non-staining
- Unscented
- Interior & Exterior use
- National Organic Program (NOP) compliant
- May be used as a crack/crevice or spot treatment in non-food
- handling areas of food establishments. In food handling areas
- may be applied as a crack/crevice treatment onl

Alpine Dust Product Label /

Alpine Dust Material Safety Data Sheet (MSDS)

How to Applying Dust Insecticide

Alpine Dust Insecticide - 8 oz.

Alpine Dust Insecticide is a direct contact insecticide in powder form. Like other Alpine products, the dust insecticide contains the non-repellent insecticide Dinotefuran. Alpine Dust Insecticide is tested and proven to control ants, cockroaches, bed bugs, beetles, fleas, moths, spiders, flies, wasps, millipedes and centipedes.

Why Should You Use Alpine Dust ?

Alpine Dust Insecticide provides a quick knockdown to a wide range of controllable pests. An 8 oz bottle of the product covers approximately 500 square feet.

Directions for Alpine Dust Use

Product can be applied by hand or by the use of dusters and other similar equipment to ensure uniform applications. Spread the product evenly on to infested areas following the recommended application rates found in the product label. Apply 0.15 to 0.30 oz. of the product per square yard of surface area.

Do not apply the product to surfaces where food is processed such as kitchen tables and sinks.

Do not treat pets or pet beddings with the product. Replace beddings after treating the area.

Please read the product label for application instructions and the recommended application rates. Pestmall offers Centrobulb Dusters and Bellow Dusters needed to apply Alpine Dust Insecticides.

Where to Apply Alpine Dust

Alpine Dust Insecticide is for use in and around residential, commercial and industrial buildings. Apply thoroughly and evenly to infested areas, cracks and crevices, nests, voids, corners, under sinks and shelves, storage areas and other places where insects congregate, nest and hide.

For perimeter applications, sprinkle the product around insect entry holes such as structural cracks and crevices, window sills, patios, porches and other areas where insects have access to the building.

Talstar Insecticide Residual Aerosol Product Label

Talstar Insecticide Residual Aerosol Material Safety Data Sheet (MSDS)

Talstar Insecticide Residual Aerosol - 16 oz.

For years, pest management professionals have chosen Talstar products to help them provide services of the highest quality to their customers. With an advanced aerosol formulation, professionals can deliver the power and dependability of Talstar with more ease of use than ever before! The industry's first bifenthrin aerosol product, Talstar insecticide is a must-have tool for general pest accounts of any size, virtually anywhere.

Ideal for quarterly service programs, Talstar achieves residual control equivalent to traditional liquid concentrates, providing up to three months of protection. With the addition of prallethrin (ETOC), Talstar also delivers impressive speed and knockdown.

Talstar controls over 50 indoor and outdoor pests, including ants, bed bugs, cockroaches, spiders, and termites. An extremely versatile product, Talstar can be used in homes, businesses and even within food areas and non-food areas of food handling establishments. And with its non-flammable, water-based formulation, you can apply Talstar to a variety of surfaces without having to worry about leaving a messy, oily-residue behind.

Talstar insecticide is available in a 16-ounce aerosol can and comes with a crack-and-crevice application straw. It is also compatible with the Whitmire Micro-Gen's System III.

Professional Grade Bee Suit Complete

Bee Suit Complete is made of heavy duty cotton and features elastic waist for a comfortable fit, two chest pockets with velcro closures, heavy duty zippers at the neck, chest, ankles, and a self supporting collapsible veil. The Bee Suit complete also comes with a pair of gloves made of goat skin leather for the best protection.

Designed for comfort and sting protection, the Professional Bee Suit is tailored specially for beekeeping and bee control. Made from a blend of heavy-duty cotton and polyester, the bee suit comes with a leather gloves and a self supporting, collapsible veil. Large and Extra Large sizes are available.

Why Should You Use?

The Robo Sports Complete Bee Suit provides total protection from stinging insects such as bees and wasps.

Advantages of Bee Suit Complete

- Self supporting and Collapsible veil attached with 2-way neck zippers.

- Elastic wrists & thumb holds

- Heavy duty zippers at the ankles

*Keep in mind that when you are laundering your suit, the veil must be removed and hand washed. It is not meant to be washed in the washer and dryer as it may become damaged. 

Properly wear the apparel. Secure the ankle, chest and veil zippers properly to avoid gaps and holes.

Use the Complete Bee Suit in bee farms and other areas where stinging insects are present.

Fireback Wasp & Hornet Jet Spray Product Label & MSDS

Fireback Wasp & Hornet Jet Spray - 13.5 oz.

Fireback Wasp & Hornet Jet Spray has a Broad Spectrum Insecticide Highly Effective Against Wasps, Hornets, Yellow Jackets, Ants, Centipedes, Cockroaches, Crickets, Fleas, Millipedes, Silverfish, Sowbugs, Ticks and Other Pests.

Advantages of Fireback Wasp & Hornet Jet Spray

- Jet spray shoots up to 20 feet above ground.
- Immediately drops wasp by lowering their body temperature, then the insecticide kills them.
- Kills with residual action as wasps & hornets return to nest
- Non-flammable solvent based insecticide.
- Non-Conductive to 47kV.
- Can be used indoors and outdoors

Please refer to and follow the instructions on the Fireback spray label.

FenvaStar EcoCap Product Label

FenvaStar EcoCap Material Safety Data Sheet (MSDS)

FenvaStar EcoCap - 8oz.

Fenvastar EcoCap is a microencapsulated suspension concentrate containing 0.3 pounds active ingredient per gallon.

Fenvastar EcoCap is designed to provide long residual activity against pests listed on this label when applied as surface or spot treatments or as a crack and crevice spray in and around residential and commercial structures, as well as on turf and landscaping. Fenvastar EcoCap may be sprayed on any surface that will not be stained by water. DO NOT use this product as a fogger or apply it as a space spray. Do not apply in electrical conduits, junction and switch boxes, motor housings, or other electrical equipment due to shock hazard from water-based spray.

Fenvastar EcoCap should be mixed with water and applied with hand pressurized or power operated sprayers. Shake container of Fenvastar EcoCap before diluting. Clean spray equipment before use. For dilution, add approximately half the required water to spray tank and then add the appropriate amount of Fenvastar EcoCap. Agitate and slowly add the remaining water. Agitate spray thoroughly before using and also occasionally during use to ensure dispersion.

Apply as a course, wet spray to surfaces where these pests are normally found. Treat floors, baseboards, around doors and windows, in attics, crawl spaces, eaves, corners, closets, walls, utility pipes, storage areas, and all cracks and crevices. Treat underneath sinks, dishwashers, refrigerators, stoves, the underside of shelves, drawers, cabinets, areas behind pipes, and in all places where these insects shelter. Contact as many insects as possible with direct spray. Repeat applications as needed, but do not exceed more than one (1) application every seven (7) days.

Please refer to and follow the instructions on the Product label.

Beekeeper Pull Over Jacket and Veil with a pair of gloves

Beekeeper Pull Over Jacket and Veil is made of a heavy duty cotton and polyester blend and features elastic waist for a comfortable fit and a self supporting collapsible veil.

Designed for comfort and sting protection, the Beekeeper Pull Over Jacket is tailored specially for beekeeping and bee control.

The Beekeeper Pull Over Jacket also comes with a pair of gloves made of leather for the best protection.

Why Should You Use?

The Beekeeper Pull Over Jacket and Veil provides total protection from stinging insects such as bees and wasps.

Popular round hat design, allows good visibility, strong rings keep the bees well away from your face. Veil is made from strong black net .One section pocket at the front.

Use the Beekeeper Pull Over Jacket and Veil in bee farms and other areas where stinging insects are present.

Professional Grade Bee Control leather Gloves

Professional Grade Bee Control leather Gloves provide sting protection in beekeeping and bee control. The pair of gloves made of leather for the best protection.

Designed for comfort and sting protection, the Professional Grade Bee Control leather Gloves are tailored specially for beekeeping and bee control. Made from heavy-duty leather for the best protection. X Small, Small, Medium, Large, X Large, 2X Large, 3X Large and 4X Large sizes are available.

Beekeeper Pull Over Jacket and Veil

Beekeeper Pull Over Jacket and Veil is made of a heavy duty cotton and polyester blend. It features an elastic waist for a comfortable fit and a self supporting collapsible veil.

Designed for comfort and sting protection, the Beekeeper Pull Over Jacket is tailored specially for beekeeping and bee control. Small, Medium, Large, Extra Large, XX Large and 3X Large sizes are available.

Why Should You Use?

The Beekeeper Pull Over Jacket and Veil provides total protection from stinging insects such as bees and wasps.

Popular round hat design, allows good visibility, strong rings keep the bees well away from your face. Veil is made from strong black net .One section pocket at the front.

Vented Bee Suit

Stay cool, even in the hot temperature summer weather, with the Vented Bee Suit. This specially designed bee suit is made of a rubber type waffled material that is layered between net-like woven material. This special design of open net-like material lets the air ventilate underneath the suit and a gentle breeze flow through the suit. It is still a durable suit for bee control because the thickness of the three layers combined is far too wide for a stinger to past through. Just like regular bee suits, the Vented Bee Suit has an elastic waist for a comfortable fit. It also features pockets around the suit. It is a two way neck zipper that helps you to remove the veil comfortably and easily. The self supporting veil is a feature that is also included in other professional grade bee suits that easily collapses for storage.

Designed to be the most comfortable suit, even during the summer time, does not mean that it is not safe. This suit is also designed for sting protection from bees and is tailored specially for beekeeping as well as bee control.

Gloves are sold separately.

Why Should You Use the Vented Bee Suit?

-Self supporting and collapsible veil
- Two way zipper around neck and chest for an easy on and off of the suit
- Elastic waist and wrists for comfort and protection
- Specially designed layers of woven material for comfort against hot temperatures

Medium ,Large, X Large and XX Large size Available

Eco Keeper Bee Suit (Hooded Suit)

Standard bee suits use a durable cotton material that is heavy duty and although it protects from stings, it can be slightly uncomfortable and can be very hot because of the heavy cotton material that is used to make the suit. The Eco-Keeper Bee Suit utilizes a new technique to create a bee suit that is lightweight, but still protects in the same way that standard bee suits do. The tightly woven fabric pulls threads together to make it impossible for the bees to sting through. It is made of a 60% cotton 40% polyester blend that is much lighter than the heavy duty 100% cotton suits. If you don’t need a more rugged suit that is more suitable for bee control, use this lightweight suit that is comfortable for gardening and bee keeping.

Gloves are sold separately.

Why Should You Use the Eco Keeper Bee Suit?

- 2 Layer Hood
- Self-supporting Collapsible Veil
- Heavy Duty YKK Zippers
- 2 Way Neck Zipper

Medium ,Large, X Large and XX Large size Available

Eco Keeper Bee Jacket (Hooded Jacket)

The Eco Keeper Bee Jacket is made of a lightweight material that is lighter than heavy-duty cotton but just as durable and protective from bee stings. Because of the lightweight material, it keeps you cool but keeps the durability at a beyond excellent level. The Eco-Keeper Bee Jacket features the use of a tightly woven fabric that pulls threads tightly together to keep the bees from stinging through the material. Because it is made of a 60% cotton 40% polyester blend, it is much lighter the heavy duty cotton that is not only heavier but a lot hotter when the days get warm.

Gloves are sold separately.

Why Should You Use the Eco Keeper Bee Jacket?

- Lightweight Cotton/Polyester blend
- Elastic wrists for complete protection
- Unobstructed vision
- Elastic cuffs with the thumb hold

Medium ,Large, X Large and XX Large size Available

Eco Keeper Vented Bee Jacket (Hooded Jacket)

Bee suits can protect you from bee stings, but can get very hot with the thick layer of cotton on top of your clothes. Stay cool though with the Eco Keeper Ventilated Bee Jacket. The ventilated technology of the suit keeps you cool, even in hot temperatures during the late spring and summer seasons. This suit is designed with a waffled type material that is layered in between two net-like materials. Because the layers are stacked in a special way, it is impenetrable by bee stings, all the while, allowing the air to move freely through the material. This suit also features a full jacket zipper going down the front of the jacket. Like normal jackets, it is easy to put on and take off and it is unlike other smock type “bee jackets.” The hood can be completely detached so that maintenance of the suit is made easy.

Gloves are sold separately.

Why Should You Use the Vented Bee Jacket?

- Self supporting and collapsible veil that can also be detached from the suit
- Elastic waist and wrists for comfort and protection
- Specially designed layers of woven material for comfort against hot temperatures

Medium ,Large, X Large and XX Large size Available

Eco Keeper Bee Jacket (Round Style Hood Cricket Style Jacket)

The Eco Keeper Hat/Veil Jacket is a lightweight 60% cotton 40% polyester blend. Lighter, yet durable and protective from bee stings, it will exceed your expectations. The veil features a panoramic view for the convenience of the user which fully zips on to the suit for extra protection. The suit has been designed with light weight material which has been detailed with tightly woven fabric for the prevention of stings and to keep cool during the hotter seasons.

Gloves are sold separately.

Why Should You Use the Eco Keeper Hat/Veil Jacket?

- Lightweight Cotton/Polyester blend
- Elastic wrists for complete protection
- Panoramic veiled view
- Elastic cuffs with the thumb hold

Medium ,Large, X Large, XX Large and 3X Large size Available

Eco Keeper Bee Suit (Round Style Hood, Cricket Style Suit)

The Eco Keeper Hat/Veil Suit is a lightweight 60% cotton 40% polyester blend. Lighter, yet durable and protective from bee stings, it will exceed your expectations. The veil features a panoramic view for the convenience of the user which fully zips on to the suit for extra protection. The suit has been designed with light weight material which has been detailed with tightly woven fabric for the prevention of stings and to keep cool during the hotter seasons.

Gloves are sold separately.

Why Should You Use the Eco Keeper Hat/Veil Suit?

- Elastic wrists for complete protection
- Self-supporting Collapsible Veil
- Lightweight Cotton/Polyester blend

Medium ,Large, X Large, XX Large and 3X Large size Available