Bio Map Product Label

Bio Mop

BioMop is a non-toxic, non-caustic cleaning agent specially formulated to remove organic waste in various surfaces. Using a patented formula that contains a blend of bacteria and surfactants, BioMop effectively cleans and break down tough organic material present in surfaces. When applied regularly, BioMop prevents buildup of grease and other organic debris in drain lines, floors and other areas. Made from naturally occurring substances and organisms, BioMop is biodegradable and is safe to use in plumbing. The product can also be mixed with foaming agents to produce foam solutions.

Why Should You Use Bio Mop?

Unlike other cleaning agents, BioMop contains bacteria that break down organic debris to the molecular level to clean and protect treated areas.

Directions for Bio Mop Use

For mopping applications, mix thoroughly 4 ounces of BioMop with 2 gallons of water. Mop surfaces thoroughly and pour the remaining solution into the drains. Use sprayers or similar equipment to apply the undiluted solution of BioMop to cracks and crevices, voids and other hard-to-reach areas.

For foaming applications, mix 6 ounces of BioMop, 3 ounces of foaming agent and 23 ounces of water to form one quart of foam solution. Using appropriate application equipment, apply foam to cracks, crevices and hard-to-reach areas.

Where to Use Bio Mop

BioMop is for use in and around food and non-food handling areas of residential and commercial buildings such as sinks, bathrooms, floors, tiles, drain lines and other areas.

Product Label

Material Safety Data Sheet (MSDS)

Mop Up Boric Acid Insecticide - 5 lbs.

Mop Up Boric Acid Insecticide is one of the easiest products to use. Mainly used in commercial buildings to get rid of pests. After mopping add Mop Up Boric Acid to the rinse water and just mop. Avoid any areas that might come in contact with food.

Nursing Homes, Hospitals, Grocery Stores, Hotels, Restaurants, Food and Feed Handling Establishments, Warehouses, Schools, Theaters, Markets, Apartment Buildings and Military Bases.

Add 1 cup of powder to each gallon of rinse water. Apply to floor areas only. Make only enough for each application. Supplemental treatment only. Reapply as necessary. Avoid treating surfaces likely to be contacted by food. This product contains a heat-treated form of boric acid which is substantially more water soluble than other borate products. This product is a nonflammable, non-staining, odorless powder that will help control cockroach infestations and should be used in conjunction with a residual boric acid powder, or with your regular exterminating service.