Demand CS Product Label

Demand CS Material Safety Data Sheet (MSDS)

Demand CS Brochure

Demand CS - 8 oz

Demand CS is a highly active insecticide featuring Syngenta's iCAP microencapsulation technology. By encapsulating Lambda-Cyhalothrin, Demand CS produces residuals that are waterproof, photo-stable, and long lasting. Controlled release of the active ingredient greatly increases residual life at the same time reduce the residue's odors and stains. Versatile and economical, Demand mixes well with other registered pesticides and can be diluted and applied in very low concentrations.

Why Should You Use DEMAND CS ?

Demand CS uses microencapsulation techniques to extend the life end efficiency of residuals.

Directions for DEMAND CS Use

Use Demand CS for surface, crack and crevice or spot treatments. The product comes as a concentrate that must be diluted with water and applied using application equipment such as hand/power sprayers.

Shake well before using. Mix Demand CS with water to produce solutions. Finished solutions can be converted to foam using foaming agents to treat structural voids and nests. Solutions may have 0.015% to 0.06% active ingredient content, depending on the target pest/s and the severity of their infestations. Other registered insecticides may be added to yield solutions with multiple capabilities. Please read the product label for dilution tables and application rates.

Apply as a coarse, low pressure spray to indoor or outdoor sites and surfaces. Spray to areas where insects are seen congregating, hiding, breeding and other potential harborage areas. Pay special attention to cracks, crevices and voids in structures. Treat these areas with liquid or foam using appropriate equipment and methods.

Demand CS can also be used to create perimeter barriers, treat infestations in ornamental plants and turf and for subsurface treatments to control mole crickets and ants. Refer to the product label for specific instructions on how to control target pests.

Where to Apply DEMAND CS

Demand CS is for use in, on and around residential, commercial, institutional, public, agricultural and industrial buildings/structures.

Demand G Product Label

Demand G Material Safety Data Sheet (MSDS)

Demand G Granules - 25 lbs.

With an innovative formulation process, the granular perimeter treatment of Demand G with Active Release technology provides powerful and efficient protection against nearly 30 species of pests. Demand G is exclusively engineered with an enhanced solvent for the optimal release of its active ingredient, lambda-cyhalothrin, from the granule. Demand G is specially formulated of optimal release of insecticide and ideal for applications in damp and windy conditions. Demand G is labeled for lawn, landscape and perimeter use. Demand G is also superior in efficiency and provides more treatments per package than traditional granules. Demand G is approved for residential, commercial, and institutional applications.

Useful Tips You May Need to Know

We recommend applying Demand G Granules with handle spreader for easier and more effective application.

Advantages of Demand G Granules

Specially formulated of optimal release of insecticide

Ideal for applications in damp and windy conditions

Labeled for lawn, landscape and perimeter use

Superior efficiency provides more treatments per package than traditional granules

Approved for residential, commercial and institutional applications

For control of ants, beetles, crickets, earwigs, firebrats, millipedes, mites, silverfish and sowbugs as commonly found around or near foundation of structures as well as in yards with Demand G:

Some of these pests may enter houses. Applying a continual band of insecticide around a building foundation can greatly reduce the potential for entry by crawling pests. For optimal control, remove debris and leaf litter from next to the foundation, cut back vegetation and branches that touch the foundation, and move or rake back rocks, deep mulch, or other potential pest harborage next to the foundation prior to application. Apply a 3 to 5 foot band of granules next to the structure foundation. Apply at the rate of 2 to 3 lbs. per 1000 square feet. Distribute granules uniformly. For optimal control, water lightly to dissolve granules.

For control of ants, armyworms, centipedes, crickets, cutworms, earwigs, grasshoppers, green June beetles, Japanese beetles (adult), leafhoppers, millipedes, mites, pillbugs, sod webworms, spider mites, spittlebugs and springtails with Demand G:

Apply at the rate of 2 to 3 lbs. per 1000 square feet with a fertilizer spreader when grass is dry. For best results, water lawn lightly to dissolve granules.

For control or suppression of billbugs, chinch bugs, dung beetles, green June beetle grubs, Hyperodes weevils, Japanese beetle grubs and mole crickets, immediately water grass thoroughly after application with Demand G:

For billbug control, apply when activity is first observed or when chewed or brown grass indicates damage from these insects. For grub suppression, except dung beetle, treat any time between late July and early October. For dung beetle grub suppression, apply in spring or early summer when damage is first noticed. For best results, water grass thoroughly with 1/4 to 1/2 inch of water as soon as possible following application. Treat again in late summer or early fall if a second generation occurs. For chinch bugs, use higher rates during summer when both nymphs and adults may be present. For mole crickets, make applications for adults during early spring when grass areas may be subject to continuous invasion. For best results, apply as late in the day as possible and water in with up to 0.5 inches of water as soon as possible following treatment. When the soil is not moist, irrigation before application will bring mole crickets closer to the surface to enhance contact with the granule. Applications at the time of peak egg hatch will increase control of early nymphal stages that are more susceptible to insecticides. As nymphs mature, higher rates may be necessary.

Spot Treatment for Ants with Demand G:

For general ant control, apply 11/2 teaspoons over and around each ant hill. Lightly water to dissolve granules. Apply water gently to avoid disturbing ants, first breaking any necessary soil crust to ensure water penetrates the nest. Use of high pressure watering equipment may disturb the ants and cause migration-reducing product effectiveness. NOTE: For best results, apply in cool weather, 60 to 80 F, in early morning, or late evening hours. Treat near mounds as they appear. Difficult or extensive ant infestations will benefit from a combination of broadcast treatments and spot applications. If soil is not moist, irrigate before application to bring ants closer to the surface to enhance control with Demand G Insecticide granules. Do not apply this product to edible growing crops or stored raw agricultural commodities used for food or feed. Do not allow applications to contact water inhabited by fish, such as in ornamental fish ponds that are located around structures being treated. Do not apply this product by aerial application. Use of this pesticide adjacent to water may affect aquatic organisms. To protect these organisms, do not apply this pesticide within 25 ft. of lakes, reservoirs, rivers, permanent streams, marshes or natural ponds, estuaries, and commercial fish farm ponds. In the state of New York, do not apply within 100 ft. of coastal marshes or streams that drain into coastal marshes. Observe all restrictions and precautions which appear on the labels of these products. Do not apply more than 0.36 lbs. of the a.i. (800 pounds of Demand G Insecticide) per year. Good coverage is necessary to provide the most effective level of control. Consult your state university or local Cooperative Extension Service office for specific pest control application timing in your area. Application to turf should be started prior to the establishment of high insect pest populations and significant turf damage. Make reapplications as necessary to keep pest populations under control, using higher rates as pest pressure increases.

DRAGNET SFR Product Label

DRAGNET SFR Material Safety Data Sheet (MSDS)

Dragnet SFR - 1 Qt

From the makers of CB Residuals and Talstar insecticides comes another revolutionary termiticide with enhanced residual and contact kill capabilities. FMC's Dragnet SFR Termiticide/Insecticide does not break down easily in soil and retains its potency for extended periods of time. Specially formulated for subterranean termites, Dragnet also targets a wide range of indoor and outdoor pest insects. Versatile and very economical, one quart yields 100 gallons of solution that can be used in a variety of applications.

Why Should You Use Dragnet SFR ?

Dragnet SFR is superior in both residual control and contact kills to more than 50 insects in its label.

Directions for Dragnet SFR Use

Dragnet SFR is a concentrate that must be diluted in water to create emulsions. Active ingredient content may vary from 0.5% to 2.0% depending on treatments or target pests. Use this product for pre-construction treatments of structures or to treat existing termite infestations in and around buildings and structures. Knowledge of treatment techniques such as rodding, trenching, sub-slab injections, void injections and crack and crevice treatments is essential in order to have effective control of termites. Use this product for residual pest control in and on buildings and their immediate surroundings. Dragnet SFR may be used in broadcast applications, spot applications, crack and crevice injections or as a paint-on treatment. Consult the product label for more details.

Where to Apply Dragnet SFR

Dragnet SFR is for use in and around residential, commercial, public and industrial buildings. This includes homes, apartments, laboratories, greenhouses, non-food areas of food handling store areas, warehouses, schools, nursing homes, hospitals, transports and food processing, manufacturing and servicing establishments.

Eco Exempt IC 2 Product Label

Eco Exempt IC 2 Material Safety Data Sheet (MSDS)

Eco exempt IC-2 Insecticde (Essentria IC - 3)

Eco exempt IC-2 Insecticde (Essentria IC - 3) uses a knockdown method to kill pests the minute they come into contact with it. EcoExempt IC is an all-natural substance made from oils such as rosemary, wintergreen, and eugenol. Unlike chemical pesticides, EcoExempt IC-2 leaves behind a botanical scent. EcoExempt IC- 2 works great for corners, cracks, and crevices.

Inside: Apartment buildings, bakeries, beverage plants, bottling facilities, breweries, cafeterias, candy plants, canneries, cereal processing and manufacturing plants, dairy barns, poultry facilities, flour mills, food processing plants, frozen food plants, homes, hospitals, hotels, houses, industrial buildings, kennels, kitchens, laboratories, manufacturing facilities, mausoleums, meat processing and packaging plants, meat and vegetable canneries, motels, nursing homes, office buildings, restaurants, schools, stores, supermarkets, warehouses, and similar structures.

Outside:Building foundations, dairy facilities, drive-in restaurants, drive-in theaters, golf courses, parks, playgrounds, poultry houses, recreational areas, schools, urban areas, lawns, landscape areas, trees, turf, and zoos.

For sensitive indoor/outdoor surfaces such as vinyl, plastic, fabric, wood floors, etc. test a small non-visible area first before spraying. This includes vinyl siding, outdoor furniture, storm doors and windows, etc. It is possible that EcoEXEMPT IC2 may mar some sensitive surfaces. If spray gets on any sensitive surface that is listed, simply rinse with water and wipe off with clean cloth. EcoEXEMPT IC2 may be diluted with water or oil and applied with conventional application equipment including, but not limited to, compressed air sprayers and power sprayers. When diluting with water, prepare only the amount needed for immediate use and maintain agitation during use. Do Not Store Spray Solution Overnight. For oil dilutions that are applied in food handling establishments, a deodorized petroleum oil which conforms to CFR 21 (especially section 172.884) is required (such as Exxon Isopar M, Ashland Low Odor Base Solvent, or the equivalents). Tank mix applications must be made in accordance with the more restrictive of label limitations and precautions. No label dosages may be exceeded. This product cannot be tank mixed with any product with label prohibitions against such mixing.

Advantages of EcoEXEMPT IC-2

Quick knockdown/kill
Residual protection
Flexible label
Indoor/outdoor use
Broad spectrum
Non-staining
Highly versatile
Low aquatic toxicity
For conventional, misting and fogging equipment
Great for mosquito control programs
New softer botanical scent
May be used for on-animal applications

Do not apply directly to house plants. Cover/avoid any pools or aquaria prior to spraying.

GENERAL PEST CONTROL with Eco EXEMPT IC - 2:

To control accessible, exposed stages of crawling insects including, but not limited to, Ants, Cockroaches, Cadelles, Cigarette Beetles, Dark Mealworms, Dried Fruit Beetles, Drugstore Beetles, Confused Floor Beetles, Grain Mites, Fowl mites, Mites, Red Flour Beetles, Rice Weevils, Saw-toothed Grain Beetles, Spiders, Spider Beetles, Termites, Yellow Mealworms in sites that include, but are not limited to, apartments, homes, restaurants, food processing plants, industrial installations and warehouses, dilute at the rate of up to .5 to 6 fluid ounces of EcoEXEMPT IC2 per gallon of water (use lower rate for maintenance service and higher rates for active infestations). Thoroughly spray non-visible areas where these insects are usually found with special attention to cracks and crevices, niches, dark corners, drains and other harborage sites. To prevent potential discoloring, do not spray on visible areas (i.e. baseboards, door frames, walls, etc.) and wipe away excess. Food processing operations may continue when EcoEXEMPT IC2 is applied as a surface, spot or crack and crevice treatment in accordance with the directions and precautions given above.

FOGGING with Eco EXEMPT IC - 2:

To control crawling and flying insects (Flies, Moths, Fruit Flies, etc) in sites that include, but are not limited to, food processing plants, (INCLUDING USDA INSPECTED FACILITIES), industrial installations, animal quarters (cattle barns, horse barns, poultry barns, swine houses, zoos and warehouses), EcoEXEMPT IC2 may be applied as a space spray through conventional fogging equipment. Cover or remove exposed food and cover food-handling surfaces in edible product areas of food handling establishments. Also cover sensitive surfaces (plastics, etc). Close and shut off air conditioning or ventilating equipment. Mix 4 to10 ounces of EcoEXEMPT IC2 insecticide with sufficient oil to equal 1 gallon of diluted spray. (It is recommended to use lower rates in most food facility applications). Apply at a rate of 1 to 3 fluid ounces per 1000 cubic feet, filling the room with mist (or fog, if thermal equipment is used). Keep area closed for at least 15 minutes. Vacate treated area. Ventilate before reoccupying. Fogging may create slippery conditions on painted floor surfaces. Retreat if reinfestation occurs. The product does contain plant oils that are inherently fragrant. When used in confined spaces, prolonged exposure to the fragrance may be objectionable to some individuals.

Eco Exempt G Product Label

Eco Exempt G Material Safety Data Sheet (MSDS)

Eco Exempt G Granules

Eco Exempt G Granules offers total residual protection that includes knockdown, kill and repellency to outdoor pests such as ants, cockroaches, centipedes and many more. Eco Exempt features Hexa-Hydroxyl, a combination of plant oils (Thyme Oil and Clove Oil) known to have potent insecticidal properties. Effective, safe and economical, this product provides the same performance as other pesticides without the risk to humans, animals and the environment.

Why Should You Use Eco Exempt G Granules?

Using natural oils for control of pests, Eco Exempt is one of the safest insecticides available.

Directions for Eco Exempt G Granules Use

Eco Exempt G is intended for outdoor applications only. With hand-operated or powered spreaders, use the product for outdoor perimeter treatments and broadcast applications. Reapply if necessary.

FOR PERIMETER TREATMENTS: Apply uniformly as possible to ground area around and adjacent to structures. Treat bands of soil measuring 6 to 10 ft. in width at the rate of 2 to 5 lbs. per 1,000 square feet.

FOR BROADCAST TREATMENTS IN TURF AND LANDSCAPED AREAS: Apply at a rate of 3 to 5 lbs. per 1,000 sq. ft. of area. Irrigate treated area with ⅛ to 1/4 inches of water for best results.

Where to Apply Eco Exempt G Granules

Eco Exempt G is for use in landscaped areas and perimeters around residential, institutional, public, commercial and industrial buildings.

Eco PCO ACU Product Label

Eco PCO ACU Material Safety Data Sheet (MSDS)

Ecopco Acu Aerosol - 17 oz.

From the world leader in environmentally-safe pest control solutions, EcoSMART introduces a new contact insecticide for crawling and flying insects. EcoPCO is an unscented insecticide with Phenethyl Propionate, a natural substance derived from plants known to have insecticidal properties. This aerosol leaves no harmful residues and odors, making it ideal for use inside homes and around humans and pets.

Why Should You Use EcoPCO ACU Aerosol?

EcoPCO is safer than pyrethoid and chemical insecticides for it contains plant oils that have little effect on humans and pets.

Directions for EcoPCO ACU Aerosol Use

Shake well before using. EcoPCO is a contact insecticide that does not provide residual protection. Ensure contact with insects for effective kills. Aim directly towards insects. Apply uniformly to surfaces and spaces where insects are seen flying and crawling. Use this product for crack/crevice and void treatments by using the supplied nozzle tip. Inject to cracks, crevices, voids and other hard-to-reach areas to treat infestations.

For Crawling Insects: Crack/Crevice and Void Treatments. Important: Use the injector nozzle tip provided. Inject EcoPCO ACU Aerosol into all crack/crevice and void spaces where insects are present. Applications of EcoPCO ACU Aerosol can be made, but are not limited to, behind baseboards, cabinets, walls, ceilings, door and window frames, and around water pipes and appliances. Insects contacted by spray will be killed. Ensure contact with as many insects as possible.

Fleas & Brown Dog Ticks: Hold EcoPCO ACU Aerosol can approximately 12 inches above surface area and apply EcoPCO ACU Aerosol uniformly to infested areas such as carpets, rugs, cloth upholstery, and pet bedding. Contact fleas & ticks directly to kill these pests.

For Flying Insect Treatments: To kill these pests, aim EcoPCO ACU Aerosol spray toward flying insect infestations contacting as many insects as possible. Insects contacted by spray will be killed. Wipe away excess spray after application. Avoid spraying plants.

Where to Apply EcoPCO ACU Aerosol

Use EcoPCO ACU to kill pests in, on and around residential, commercial and industrial buildings and their immediate surroundings.

Ever Green Dust Product Label

Ever Green Dust Material Safety Data Sheet (MSDS)

PyGanic Dust (EverGreen Pyrethrum Dust) - 10 oz.

One of the most trusted insecticide dusts, PyGanic delivers fast control over 230 pests. Each bottle of PyGanic contains pure, unsynergized Pyrethrum derived from chrysanthemum flowers. With its natural active ingredient and non-toxic formulation, PyGanic is safe to use in food/feed handling areas, livestock animals and ornamental plants.

Why Should You Use?

EverGreen Pyrethrum Dust can be used to control different kinds of infestations.

Directions for Use

Please read the product label for application instructions and the recommended application rates. Pestmall offers Centrobulb Dusters and Bellow Dusters needed to apply PyGanic Dust (EverGreen Pyrethrum Dust) Insecticides.

TREATMENT OF STORED PRODUCT PESTS IN NON-FOOD/FEED AREAS: Before treatments, clean infested areas and remove infested materials, dirt and other debris. Apply at the rate of 16 to 24 ounces per 1,000 square feet of area. Thoroughly treat surfaces, floors, shelves, drawers, cabinets, cartons, containers in storage areas. Apply one ounce per 50 square feet into cracks and crevices, voids and other hard to reach areas.

INDOOR TREATMENT OF CRAWLING INSECTS: Apply EverGreen Dust at the rate of 1.5 oz. per 50 sq. ft. into cracks, crevices and voids where insects live and breed. Apply uniformly to areas under and behind sinks, refrigerators, stoves and washing machines, around garbage cans, cabinets, shelves, baseboards, door frames, drains, pipes and other sites where insects are seen. Treat crawlspaces and attics at the rate of 16 to 20 ounces per 1,000 square feet.

TREATMENT OF FLEAS, TICKS AND MITES: Remove pets from treatment areas. Thoroughly treat pet beddings, resting areas, sleeping quarters, kennels, carpets, rugs, furniture and other infected areas and their surroundings. Do not treat pets with this product.

TREATING BED BUGS: Take bed apart and apply EverGreen to bed frame, headboards and footboards at the rate of 2 oz. per 50 sq. ft. of surface area. Dust mattresses, cushions and furniture especially on folds, tufts and seams. Pay special attention to cracks and crevices between components, in walls, electrical boxes, appliances, picture frames, jambs, window sills, shelves, cabinets, curtains, blinds and their mounts.

PERIMETER TREATMENTS: Apply to a band of soil measuring 6 to 10 feet wide around and adjacent to structures and around foundations. Apply at the rate of 16 - 24 oz. per 1,000 sq. ft. Treat exterior surfaces to a height of 2 to 3 feet.

CONTROLLING LAWN, LANDSCAPE AND ORNAMENTAL PESTS: Apply EverGreen Dust at the rate of 8 to 24 ounces per 1,000 square feet. Apply uniformly to lawn surface and to areas under shrubs and trees. Wait for the dust to settle before irrigating treated surfaces.

TREATMENT IN LIVESTOCK PREMISES AND DOMESTIC ANIMALS: Cover Apply to indoor and outdoor animal areas at the rate of 16 to 24 oz. per 1,000 square feet. Treat cracks and crevices, structural joints, floors, trusses, rafters, ceilings, gates and other areas harboring pests. Conduct perimeter treatments as stated above. Apply 1 to 2 ounces of dust per animal using appropriate application equipment. Apply to head, neck, shoulders, back and legs. Do not treat more than once every 10 days.

Where to Apply

PyGanic is labeled for use in and around food/feed or non-food/feed areas of agricultural, residential, commercial, food/feed handling and processing plants, industrial and institutional buildings.

Masterline Bifenthrin 7.9 Product Label

Masterline Bifenthrin 7.9 Material Safety Data Sheet (MSDS)

Masterline Bifenthrin 7.9 Brochure

Masterline Bifenthrin 7.9

Univar's Masterline Bifenthrin Insecticide/Termiticide offers superior control of indoor and outdoor pests such as termites, cockroaches, ants and many more. Its active ingredient, Bifenthrin, is popular for its broad spectrum of control and excellent residual properties. With Masterline's powerful residual formulation, expect effective and lasting control the toughest pest infestations in and around your homes.

Why Should You Use?

Masterline Bifenthrin 7.9 targets several indoor and outdoor pests. This highly versatile product is the solution to all your indoor and outdoor pest problems.

Directions for Use

Masterline Bifenthrin 7.9 is an emulsifiable concentrate intended for water dilutions. Finished solutions can be used for general surface treatments, crack and crevice treatments or spot applications. Finished emulsions may be converted to foam using suitable foaming agents. Insect growth regulators and other pesticides may be tank mixed together with the product unless explicitly prohibited by the product label. Masterline is excellent for use in treating termite infestations. Technicians must be familiar with termite control techniques such as trenching, rodding, sub-slab injection and coarse spray application for effective use of the product. Apply finished emulsions using appropriate equipment such as hand held or powered sprayers, brushes, foam applicators and other similar application equipment. Carefully read the product label for application directions, dilution rates and application rates.

Where to Apply

Masterline controls pests indoors and outdoors on residential, commercial, institutional, public, commercial and industrial buildings. Areas of use also include lawns, ornamental plants, interiorscapes, recreational areas and athletic fields.

Pro Citra DL Product Label

Pro Citra DL Material Safety Data Sheet (MSDS)

Pro Citra DL Botanical Insectcide (Orange Oil) - 17.5 oz.

From Whitmire Micro-Gen's line of all natural insecticides, Pro Citra contact kill aerosol offers the same performance as synthetic insecticides without the toxicity. This natural, broad label product targets several common household insects such as ants, roaches and termites. Its active ingredient is d-Limonene, a botanical insecticide with very low toxicity to humans. This makes the product ideal for use in sensitive accounts such as schools, nursing homes and hospitals.

Why Should You Use?

Pro Citra does not contain synthetic active ingredients that are usually toxic.

ProCitra-DL is a botanical-based insecticide ideal for Crack and Crevice and spot treatment in both food and nonfood handling areas. It controls a wide variety of pests including ants, cockroaches, fleas and spiders and may be used in sensitive accounts such as schools, nursing homes, food processing plants, hospitals and government buildings.

Directions for Use

Pro Citra-DL is intended for crack and crevice and/or spot treatments only in food and non-food handling areas. Use this product with the supplied actuator and injection tubes. Place injector tip into cracks, crevices and voids where insects typically hide. Move injector tip along small openings at the rate of 3 linear feet per second for light infestations and one linear foot per second for heavy infestations. Treat close voids at the rate of one to five seconds per three cubic feet. For spot treatments, hold the container upright and direct the nozzle 12 inches from the surfaces. Treat areas under sinks, around pipes, refrigerators, stoves, washing machines, areas around cabinets, baseboards, floor drains, utility boxes and other infested sites. Contact insects as much as possible. Reapply as necessary. Read the product label for more information.

Where to Apply

Pro Citra Botanical Insecticide is for indoor use in apartments, homes, hotels, hospitals, nursing homes, schools, day care centers, food storage areas, restaurants, food processing plants, supermarkets, utilities, warehouses, modes of transport (buses, trains, trucks, ships), and other commercial, institutional and industrial buildings.

Talstar PL Granular Product Label

Talstar PL Granular Material Safety Data Sheet (MSDS)

Talstar PL Granular Insecticide - 25 lbs.

Talstar PL Granular is different from Talstar EZ it has an unique sand core granular structure. It is a lot finer then the EZ. Talstar PL release its chemical through out time as it rains. Talstar PL can be used to treat not only residential but commercial and recreation centers as well. Once the Talstar PL is inside soil it will protect by killing the pest as well as preventing pest problems. For lawn areas the application of the Talstar PL can last 2- 3 mos. One recommendation is to use a form of handle spreader to evenly spread the granular.

Useful Tips You Should Know: Do not exceed 0.2lb of Talstar PL per acre in residential use, and 0.4lb of Talstar PL per acre in commercial use.

Avoid using in commercial greenhouses or areas where grass is grown for seeds. Safe around non targeted animals.

General Information of Talstar PL Granular Insecticide Talstar PL granular has a sand core granular structure that penetrates mulch with no odor and no watering needed. It's heavy and dust-free so it won't drift off target. And it remains on the soil surface so it's effective even after irrigation or rainfall. Labeled for a broad spectrum of perimeter pests, Talstar PL granular controls everything from fleas, ticks and flies to mosquitoes, mites and millipedes. Talstar PL granular provides two to four months of effective, long-term residual protection. Low application rates make it an excellent, cost-effective choice for building and foundation perimeters. Put an end to fire ant colonies fast. The Talstar PL granular program is proven to eliminate dangerous fire ant invaders within 24 hours. For quick and reliable colony control and long-term protection against reinfestation of invading fire ants, combine a mound treatment with a broadcast application of Talstar PL granular.

To ensure optimum control, irrigate the treated area with up to 0.1 inches of water immediately after application to activate (release from the granule) the insecticide.

Temprid SC Product Label

Temprid SC Material Safety Data Sheet (MSDS)

Temprid SC Supplemental Lable

Temprid SC Insecticide - 400ml

Temprid SC (Suspension Concentrate Formulation) insecticide is an easy-to-use and provides quick knockdown and long residual control of more than 50 pests by combining the broad spectrum, fast-acting control of beta-cyfluthrin with the systemic residual control of imidacloprid to provide premium performance and effecacy.

Tempirid SC's Advantages:

Delivers unsurpassed ant control.
Also eliminates aphids, scale and mealy bugs that produce honeydew, a preferred food source of many ant species.
The only perimeter pest control product you will ever need
Broad spectrum insecticide - controls perimeter pests that some competitive products don't.
Flexible label.
Can be applied outdoors and indoors.
Can be applied as a perimeter application 3 ft up and 10 ft out from the structure.
Better pest stopping power than non-repellents.

Demon WP Product Label

Demon WP Material Safety Data Sheet (MSDS)

DEMON WP Insecticide - 1 Envelope

Syngenta's Demon WP is an odorless, water-soluble insecticide that delivers quick knockdown and lasting residual control of over 30 pests. The product contains 40% Cypermethrin, one of the most reliable pyrethroids to control indoor and outdoor pest infestations. Demon WP is available in convenient 1-lb jars with scoops and in envelopes which greatly reduces the efforts of mixing. One pound of the product makes up to 50 gallons of finished solution.

Why Should You Use DEMON WP?

Demon WP is a broad label insecticide providing fast kill and long-term residual control at a lesser cost.

Directions for DEMON WP Use

Demon WP is in the form of soluble powder that is intended for water dilutions. Following the dilution rates found in the product label, add measured amounts of Demon WP to water to produce the desired amount of solution. Compatible pesticides may be mixed together with the product unless prohibited by the product label. Use the finished solutions for surface treatments, crack and crevice treatments or spot applications. Apply solutions using handheld or powered sprayers, crack and crevice injectors or paint brushes.

Permitted areas of use in nonfood/nonfeed areas include, but are not limited to: aircraft (cargo and non-cabin areas only), apartment buildings, boiler rooms, buses, closets, correctional facilities, decks, entries, factories, fencing, floor drains (that lead to sewers), food granaries, food grain mills, food manufacturing, processing and serving establishments; furniture, garages, garbage rooms, greenhouses (non-commercial), hospitals (non-patient areas), hotels and motels, houses, industrial buildings, laboratories, livestock/poultry housing, landscape vegetation, locker rooms, machine rooms, mausoleums, mobile homes, mop closets, mulch, nursing homes, offices, patios, pet kennels,porches, railcars, restaurants, storage rooms, schools, sewers (dry), stores, trailers, trees, trucks, utility passages, vessels, vestibules, warehouses, wineries, and yards.

Repeat treatments as necessary, but not more than once every 7 days.

Where to Apply DEMON WP

For use by commercial applicators in, on and around buildings and structures for the control of listed pests, including on lawns, ornamental trees and shrubs around residential, institutional, public, commercial, agricultural and industrial buildings; and parks, recreational areas and athletic fields.

Demon WP may be used as a general surface, crack and crevice and/or spot treatment in the non-food areas of food handling establishments. Examples of non-food areas include garbage rooms, lavatories, floor drains (to sewers), entries and vestibules, offices, locker rooms, machine rooms, boiler rooms, garages, mop closets, and storage (after canning or bottling).

Do not use Demon WP in food areas of food handling establishments, restaurants or other areas where food is commercially prepared, processed or served. Food areas include areas for receiving, storage, packing (canning, bottling, wrapping, boxing), preparing, edible waste storage and enclosed processing systems (mills, dairies, edible oils, syrups). Serving areas (when food is exposed and facility is in operation) also would be considered a food area.

Talstar Pro Product Label

Talstar Pro Material Safety Data Sheet (MSDS)

Talstar Pro (formerly Talstar One) - 1 pint

Talstar Pro formerly known as Talstar One's name means one professional product for all control. Talstar Pro is able to target over 75 different pests and is great for in and outdoor uses. Talstar Pro is a long lasting residual that lasts up to 3 months, it is odorless, leaves a clear residual, leaves no stain, non- irritating on the skin and does not break down easily with rain. Talstar Pro is also well known for its effectiveness with termites. With Talstar Professional insecticide you know you'll get the job done right every time. That's because it gives you superior, long-lasting control of the toughest general pests and termites. In fact, Talstar is effective on more than 75 pests. Plus, it's approved for multiple use-sites, so you can use it almost anywhere - indoors, outdoors, industrial, commercial and food-handling areas.

Proven, flexible protection indoors. Talstar Professional is an effective insecticide that's tough on ants and general household pests. In fact, its multi-use label makes it so versatile, you can trust it to provide effective indoor control of bed bugs, fleas, flies, scorpions, spiders and cockroaches almost anywhere, including: industrial and commercial sites, kitchens, restaurants, supermarkets and food processing plants.

Reliable, long-lasting protection outdoors. For outside and perimeter jobs, Talstar Professional is labeled for a broad spectrum of perimeter pests and provides long-lasting residual control of everything from fleas, ticks and flies to mosquitoes, mites, millipedes and termites.

Plus, it's non-staining and contains no odorous or plant-damaging solvents. Once it dries, it is virtually impossible to tell where it has been sprayed. Even better, it leaves no unsightly residues and causes no known phytotoxicity.

Put an end to fire ant colonies fast. Talstar Professional can even be used to destroy fire ant colonies. Simply drench the mound for 95% control in 24 hours, and then apply a broadcast application to eliminate re-infestation of invading fire ants for up to six months.

To control Bees, Wasp, Hornets, and Yellow-Jackets apply a 0.06% emulsion. Application should be made in the late evening when insects are at rest. Spray liberally into hiding and breeding places, especially under attic rafters, contacting as many insects as possible. Retreatment may be necessary to achieve and/or maintain control during periods of high pest pressure. Repeat application is necessary only if there are signs of renewed insect activity. Important: Do not apply emulsion until location of heat pipes, ducts, water and sewer lines and electrical conduits are known and identified. Caution must be taken to avoid puncturing and injection into these structural elements. Do not apply into electrical fixtures, switches, or sockets.
In the home, all food processing surfaces and utensils in the treatment area should be covered during treatment or thoroughly washed before re-use. Remove pets, birds, and cover aquariums before spraying. Do not permit humans or pets to contact treated surfaces

Talstar Pro formerly known as Talstar One's name means one professional product for all control. Talstar Pro is able to target over 75 different pests and is great for in and outdoor uses. Talstar Pro is a long lasting residual that lasts up to 3 months, it is odorless, leaves a clear residual, leaves no stain, non- irritating on the skin and does not break down easily with rain. Talstar Pro is also well known for its effectiveness with termites. With Talstar Professional insecticide you know you'll get the job done right every time. That's because it gives you superior, long-lasting control of the toughest general pests and termites. In fact, Talstar is effective on more than 75 pests. Plus, it's approved for multiple use-sites, so you can use it almost anywhere - indoors, outdoors, industrial, commercial and food-handling areas.

Cyzmic CS Product Label

Cyzmic CS Material Safety Data Sheet (MSDS)

Cyzmic CS - Quart

Cyzmic CS is a broad label insecticide which features CapVantage™ Technology which greatly improves residual life and efficiency of applied solutions. Cyzmic is a controlled release insecticide which means that microencapsulated Lambda Cyhalothin is released only when insects come into contact with the microcapsules. Cyzmic CS provides fast knockdown and extended residuals with little or no odor. Covering more than 70 pests in its label, Cyzmic is the solution to all your indoor and outdoor pest problems.

Why Should You Use Cyzmic CS?

Cyzmic CS is a broad label insecticide with unparalleled efficiency in both contact kill and residual control.

Directions for Cyzmic CS Use

Cyzmic CS is to be diluted with water for crack and crevice applications, spot treatments and surface treatments. Apply finished solutions using handheld or powered application equipment. The product may be mixed with foaming agents to treat infestations in structural voids. Registered pesticides and insect growth regulators may be tank mixed with Cyzmic CS unless explicitly prohibited by the product label. Use the product to treat infestations of household pests, ornamental pests and lawn/turfgrass pests.

Apply the product as directed in the product label. Carefully read the product label for dilution and application rates, precautions and specific use instructions.

Where to Apply Cyzmic CS

Use Cyzmic CS as a general surface, crack and crevice, or spot treatments in and around residential, commercial, public and industrial buildings. These areas include apartment buildings, homes, hospitals, hotels, mobile homes, greenhouses, non-food/feed areas of food/feed handling establishments, stores, warehouses, factories, restaurants, livestock/poultry housing and food processing plants.

Onslaught Product Label

Onslaught Insecticide Material Safety Data Sheet (MSDS)

Onslaught Insecticide Brochure

Onslaught Insecticide - 16 oz.

Onslaught Microencapsulated Insecticide is everything an insecticide should be. Broad label, fast acting and long lasting, Onslaught covers every aspect of pest control. Using microencapsulation technology, residual efficiencies are increased, leading to extended residue life, superior surface adhesion and controlled release of the active ingredient.

Why Should You Use?

Onslaught controls more than a hundred indoor and outdoor pests. Coupled with exceptional residual performance and versatility, Onslaught offers a performance unrivaled by other microencapsulates.

Directions for Use

Onslaught is a microencapsulated suspension concentrate designed to provide long residual control over listed pests. Onslaught is intended for water-based dilutions for spray applications. The product is for use as a general surface spray, crack and crevice or in spot applications in and around residential and commercial structures. Shake well before using. Spray equipment must be thoroughly cleaned before utilized. Fill applicator tank half full with water and add the appropriate amount of insecticide following the recommended dilution rates. Agitate slowly and add the remaining volume of water. Insect growth regulators (IGRs) or any currently registered pesticides may be tank mixed with Onslaught unless prohibited by the product label. Do not mix Onslaught with insecticides having Dichlorvos (DDVP).

Apply only in areas described. Do not apply the product in rooms currently occupied by children, domestic animals and the elderly. Do not use Onslaught as a space spray or as a fogger. Do not treat electrical conduits, utility boxes, switch boxes and other electrical equipment. Keep pets and children away from treated surfaces until dry. Application is permitted in food/feed handling and processing establishments as directed in the product label.

Apply as a coarse, wet spray to surfaces where pests are found. Treat commonly infested areas such as baseboards, attics, crawlspaces, under sinks, around pipes and plumbing, cracks, crevices, storage areas, underneath and behind refrigerators, stoves, dishwashers, cabinets, shelves and other harborage sites. Treat ant trails, mounds, around doors and windows, garbage receptacles and other areas where ants may find entrance to structures.

Treat pet resting areas, beddings, rugs, carpets, cushions and mattresses to get rid of biting insects such as fleas, dog ticks and bed bugs. Treat nearby sites, voids and objects thoroughly to avoid reinfestations. Do not spray pets with Onslaught.

Use Onslaught to treat pests in and around livestock housing facilities. Remove animals and cover feeders/water dispensers before applications. Treat unoccupied areas thoroughly. Pay special attention to cracks and crevices, floors, stanchions, cage frames, stalls and around feeders. Treat building foundations and make a perimeter treatment around and adjacent to buildings.

Treat exterior walls, foundations and structures with Onslaught to prevent insects from entering buildings. Treat a band of soil 2 to 6 feet in wide around buildings. Spray solution to nests, mounds, eaves, cracks and crevices, voids, harborage sites and surrounding areas where pests are seen travelling.

Apply the product as a foliar spray to treat turf, turfgrass, lawn, landscape and ornamental pests. Using hand pressurized or powered sprayers, apply Onslaught at the rate of 2 to 10 gallons of spray solution per 1,000 square feet. Use lower rates for less dense foliage. Repeat treatments every 7 to 14 days. Carefully read the product label for application directions and other useful information.

Where to Apply

Onslaught Microencapsulated Insecticide is used for control of pests indoors and outdoors, in food or non-food handling areas. Areas of use include homes, hotels, apartment buildings, schools, warehouses, office buildings, food service establishments, industrial buildings, food processing plants, restaurants, supermarkets, transportation equipment, backyards, lawns, athletic fields, golf courses, parks, recreational areas and ornamental landscaping.

Evergreen Pyrethrins Material Safety Data Sheet (MSDS)

Evergreen Pyrethrins (PyGanic PRO) - 1 pint

Evergreen Pyrethrins is a broad spectrum insecticide for use in both certified organic production and situations where a botanical insecticide fits the needs of the customer.

Advantages of Evergreen Pyrethrins Insecticide

Delivers fast, effective control of insects including Ants, Cockroaches, and Stored Product Pests.
Contains pyrethrum - a botanical insecticide derived from a chrysanthemum flower.
Food and Non-Food Areas of Food Handling Processing facilities.
For use in Certified organic barns, dairies, and poultry houses.

Vector Ban Plus Material Safety Data Sheet (MSDS)

Vector Ban Plus - 8 oz.

VECTOR-BAN Plus contains 10% Permethrin and 10% Piperonyl Butoxide. VECTOR-BAN Plus is for use in automatic misting systems, outdoor band applications, indoors broadcast, crack & crevice, ULV & space spray, and on listed animals. VECTOR-BAN Plus controls mosquitoes that transmit the West Nile Virus, Flies, Gnats, Wasps, Fleas, Cockroaches, Bed Bugs, Spiders and many more nuisance pests. VECTOR-BAN Plus can be utilized in warehouses, homes, livestock housing facilities, milking parlors, poultry houses and residential yards.

Kills Mosquitoes, which may transmit West Nile Virus, Flies, Gnats, Wasps, Fleas, Ticks, Cockroaches, Spiders & many other nuisance pests. It provides extremely effective knockdown and kill of mosqutioes, gants and no-see-ums and can be used in reservoir and tankless direct injection systems. It is also labled for use in livestock facilities and horse stables.

Cyzmic CS Product Label

Cyzmic CS Material Safety Data Sheet (MSDS)

Cyzmic CS - 8 oz

Cyzmic CS is a broad label insecticide which features CapVantage™ Technology which greatly improves residual life and efficiency of applied solutions. Cyzmic is a controlled release insecticide which means that microencapsulated Lambda Cyhalothin is released only when insects come into contact with the microcapsules. Cyzmic CS provides fast knockdown and extended residuals with little or no odor. Covering more than 70 pests in its label, Cyzmic is the solution to all your indoor and outdoor pest problems.

Why Should You Use Cyzmic CS?

Cyzmic CS is a broad label insecticide with unparalleled efficiency in both contact kill and residual control.

Directions for Cyzmic CS Use

Cyzmic CS is to be diluted with water for crack and crevice applications, spot treatments and surface treatments. Apply finished solutions using handheld or powered application equipment. The product may be mixed with foaming agents to treat infestations in structural voids. Registered pesticides and insect growth regulators may be tank mixed with Cyzmic CS unless explicitly prohibited by the product label. Use the product to treat infestations of household pests, ornamental pests and lawn/turfgrass pests.

Apply the product as directed in the product label. Carefully read the product label for dilution and application rates, precautions and specific use instructions.

Where to Apply Cyzmic CS

Use Cyzmic CS as a general surface, crack and crevice, or spot treatments in and around residential, commercial, public and industrial buildings. These areas include apartment buildings, homes, hospitals, hotels, mobile homes, greenhouses, non-food/feed areas of food/feed handling establishments, stores, warehouses, factories, restaurants, livestock/poultry housing and food processing plants.

FenvaStar EcoCap Product Label

FenvaStar EcoCap Material Safety Data Sheet (MSDS)

FenvaStar EcoCap - 8oz.

Fenvastar EcoCap is a microencapsulated suspension concentrate containing 0.3 pounds active ingredient per gallon.

Fenvastar EcoCap is designed to provide long residual activity against pests listed on this label when applied as surface or spot treatments or as a crack and crevice spray in and around residential and commercial structures, as well as on turf and landscaping. Fenvastar EcoCap may be sprayed on any surface that will not be stained by water. DO NOT use this product as a fogger or apply it as a space spray. Do not apply in electrical conduits, junction and switch boxes, motor housings, or other electrical equipment due to shock hazard from water-based spray.

Fenvastar EcoCap should be mixed with water and applied with hand pressurized or power operated sprayers. Shake container of Fenvastar EcoCap before diluting. Clean spray equipment before use. For dilution, add approximately half the required water to spray tank and then add the appropriate amount of Fenvastar EcoCap. Agitate and slowly add the remaining water. Agitate spray thoroughly before using and also occasionally during use to ensure dispersion.

Apply as a course, wet spray to surfaces where these pests are normally found. Treat floors, baseboards, around doors and windows, in attics, crawl spaces, eaves, corners, closets, walls, utility pipes, storage areas, and all cracks and crevices. Treat underneath sinks, dishwashers, refrigerators, stoves, the underside of shelves, drawers, cabinets, areas behind pipes, and in all places where these insects shelter. Contact as many insects as possible with direct spray. Repeat applications as needed, but do not exceed more than one (1) application every seven (7) days.

Please refer to and follow the instructions on the Product label.