Conquer Product Label

Conquer Material Safety Data Sheet (MSDS)

Conquer Liquid Insecticide - 1 Pint

Widely used by PMPs due to its effectiveness, Conquer Insecticide is a general-use insecticide that targets hundreds of pest insects and provides lasting residues to prevent future infestations. The product's active ingredient is Estenvalerqate, a synthetic pyrethroid insecticide that is highly toxic to numerous pest insects even in low concentrations. Be a conqueror! Conquer pest infestations using Conquer Insecticide.

Why Should You Use Conquer Liquid Insecticide?

Conquer Insecticide covers a broad spectrum of controllable insects. The product is very economical, effective and long lasting.

Directions for Conquer Liquid Insecticide Use

Conquer Residual Insecticide concentrate may be diluted in water or oil. For general applications, mix one or two fluid ounces of Conquer EC with one gallon of water or oil. For light infestations, apply solutions containing 0.027% of the active ingredient (made by mixing one fluid ounce of Conquer CS with one gallon of water). Increase the active ingredient concentration when treating heavy infestations. Mix 2 fl. oz. of Conquer EC to a gallon of water to produce a solution containing 0.05% Estenvalergate. Apply solutions using appropriate spray equipment. Please read the product label for insect-specific control instructions.

Where to Apply Conquer Liquid Insecticide

Conquer Insecticide is for use in and around homes, apartments, schools, warehouses, office buildings, hotels, kennels, lawns, commercial buildings and industrial buildings.

Please refer to and follow the instructions on the product label.

Cy-Kick CS Insecticide Product Label

Cy-Kick CS Insecticide Material Safety Data Sheet (MSDS)

Cy-Kick CS Insecticide - 1 pint

Cy-Kick CS is a liquid insecticide with a 6.0% Cyfluthrin concentration. This fast-acting and long-lasting active ingredient effectively eliminates pests and provides a formidable barrier against future infestations indoors and outdoors. Using microencapsulation technology, Cy-Kick CS not only kills pest fast, its effects also lasts. Properly applied, Cy-Kick CS guarantees to provide your home a long-lasting pest protection for up to 3 months.

Why Should You Use Cy-Kick CS?

Cy-Kick CS is one of the best selling liquid insecticides trusted by professionals for its broad spectrum label, long residual life and effeciency.

Directions for Cy-Kick CS Use

First check the spraying equipment to be used in applying Cy-Kick CS and make sure that the equipment is clean and functioning. For your spraying equipment needs, PestMall offers a wide range of spraying equipment which can be found here.

Shake vigorously a pint of Cy-Kick CS Controlled Release Cyfluthrin Insecticide before diluting in 16 gallons of water. A ratio of 1 or 2 fluid ounces of Cy-Kick CS to a gallon of water yield 0.05% and 0.10% concentrations respectively. Concentrations may be varied depending on applications such as infestation intensity or residue control. Mix and agitate the spray solution to ensure an even mixture before spraying.

Surfaces must be prepared and thoroughly cleaned before commencing the treatment. Before treating, surfaces must be checked for exposed electrical connections and water presence. Cy-Kick CS should not be applied directly onto drifting water, which may contaminate water supplies in inhabited areas.

The product is extremely toxic and must be kept out of reach of children. Remember to wear safety apparel such as masks, gloves, goggles, boots and protective clothing before spraying.

Where to Apply Cy-Kick CS

Indoor Applications

Apply Cy-Kick CS indoors by first adding fluid ounce of Cy-Kick CS to a gallon of water for a 0.05% spray solution or increase Cy-Kick CS to water ratio as recommended. (Please refer to the Spray Dilution Chart)

Prepare and thoroughly clean indoor surfaces before treatment. Spray the diluted solution of Cy-Kick CS to infested areas, cracks, crevices and other areas frequented by pests. Treatments must be done 3 days apart if necessary.

Outdoor Applications

Apply Cy-Kick CS outdoors by first adding fluid ounce of Cy-Kick CS to a gallon of water for a 0.05% spray solution or increase Cy-Kick CS to water ratio as recommended. (Please refer to the Spray Dilution Chart)

Prepare and thoroughly clean outdoor surfaces before treating them. Spray the diluted solution of Cy-Kick CS to infested areas, cracks, crevices and other areas frequented by pests. Treatments must be done 3 days apart if necessary. Treat perimeter soil and building foundations to prevent future infestations.

CyhaloCap CS Product Label

CyhaloCap CS Material Safety Data Sheet (MSDS)

CyhaloCap CS Insecticide - 1 pint

High-performance microencapsulation technology for residual control. CyhaloCap CS (Capsule Suspension) Insecticide provides broad-spectrum, residual control of structural pests for PMPs who prefer lambda-cyhalothrin.

For Use in and Around: Indoor and outdoor

Product Description

CyhaloCap CS is a dilutable spray containing BASF's proprietary SmartCap microencapsulation technology and featuring lambda-cyhalothrin, a proven active ingredient with broad spectrum activity and effective residual control of structural pests.

Cynoff EC Product Label

Cynoff EC Material Safety Data Sheet (MSDS)

CYNOFF EC - 1 Quart

Cynoff EC uses a knock down method which last longer then organophosphates to control pest. Once the pest comes in contact with Cynoff EC, it is killed. Cynoff EC is an odorless insecticide concentrate and leaves no residue. Cynoff EC, along with Cynoff WP and Demon WP, belong in the synthetic pyrethroid family, carrying the same active ingredient as Cyper WP and Demon WP. You only need 1/2 to 1 ounce of Cynoff EC per gallon of water, one quart yielding 32-64 gallons.

Fortified by Cypermethrin, Cynoff EC Insecticide delivers quick and powerful cleanout control of cockroaches and other pests. Upon contact or ingestion, the active ingredient instantly paralyzes and kills insects. Commonly used for residual control or direct kill applications, Cynoff can also be used for barrier treatments with exceptional results.

Why Should You Use CYNOFF EC ?

Cynoff EC provides immediate solutions to several infestations. It is a fast-acting contact insecticide that is odorless and long lasting.

* Outdoor use only.

**Not for Indoor use in California

Directions for CYNOFF EC Use

Cynoff EC is a concentrate that must be diluted in water for spray or brushing applications. Fill sprayer tanks half-full before adding the concentrate. Add the remaining volume of water and agitate the tank to ensure a uniform mixture. Depending on the target pest/s, solutions must have 0.1% to 0.2% active ingredient content. This can be made by mixing 1/2 fl. oz. of Cynoff with 1 gallon of water to produce solutions with 0.1% A.I. concentration. Doubling the amount of the concentrate yields solutions with 0.2% A.I. content.

Apply the product as a coarse, low pressure spray to infested areas and potential insect-harboring sites such as basements, attics, behind and under appliances, storage areas, cabinets, shelves, baseboards, under sinks and along plumbing. Pay particular attention to cracks, crevices and voids.

Using hand or power sprayers, apply the product by brush or residual spray to building surfaces, porches, window screens, patios, lawns and other grass areas to control outdoor insects.

For barrier treatments, create a band measuring 6 to 10 feet around structures to protect them from infestations. Apply the product as a coarse spray, at the rate of 1 gallon per 400 square feet. Also treat building foundations and other potential entry points to a height of 3 to 5 feet.

To control cluster flies, mix 1 fluid ounce of Cynoff to 10 fluid ounces of mineral oil. Apply to 1,000 square feet of wall area using fogging equipment.

Where to Apply CYNOFF EC

Cynoff EC is for residual pest control in and on buildings and structures including: industrial buildings, houses, apartment buildings, laboratories, buses, greenhouses, and the nonfood/feed areas of stores, warehouses, vessels, railcars, trucks, trailers, aircraft (Do not use in aircraft cabins), schools, nursing homes, hospitals, restaurants, hotels, and food manufacturing, processing, and servicing establishments.

Demand CS Product Label

Demand CS Material Safety Data Sheet (MSDS)

Demand CS Brochure

Demand CS - 8 oz

Demand CS is a highly active insecticide featuring Syngenta's iCAP microencapsulation technology. By encapsulating Lambda-Cyhalothrin, Demand CS produces residuals that are waterproof, photo-stable, and long lasting. Controlled release of the active ingredient greatly increases residual life at the same time reduce the residue's odors and stains. Versatile and economical, Demand mixes well with other registered pesticides and can be diluted and applied in very low concentrations.

Why Should You Use DEMAND CS ?

Demand CS uses microencapsulation techniques to extend the life end efficiency of residuals.

Directions for DEMAND CS Use

Use Demand CS for surface, crack and crevice or spot treatments. The product comes as a concentrate that must be diluted with water and applied using application equipment such as hand/power sprayers.

Shake well before using. Mix Demand CS with water to produce solutions. Finished solutions can be converted to foam using foaming agents to treat structural voids and nests. Solutions may have 0.015% to 0.06% active ingredient content, depending on the target pest/s and the severity of their infestations. Other registered insecticides may be added to yield solutions with multiple capabilities. Please read the product label for dilution tables and application rates.

Apply as a coarse, low pressure spray to indoor or outdoor sites and surfaces. Spray to areas where insects are seen congregating, hiding, breeding and other potential harborage areas. Pay special attention to cracks, crevices and voids in structures. Treat these areas with liquid or foam using appropriate equipment and methods.

Demand CS can also be used to create perimeter barriers, treat infestations in ornamental plants and turf and for subsurface treatments to control mole crickets and ants. Refer to the product label for specific instructions on how to control target pests.

Where to Apply DEMAND CS

Demand CS is for use in, on and around residential, commercial, institutional, public, agricultural and industrial buildings/structures.

Demize EC Product Label

Demize EC Material Safety Data Sheet (MSDS)

Demize EC - 1 Pint (Flea Spray, Flea Control)

Demize EC is a contact insecticide offering short-term residual control of fleas. Its active ingredient is Linalool, a natural insecticide commonly found in plants and is proven to control fleas and tick. The active ingredient kills fleas in an instant and penetrates through flea eggs and pupa cases. Demize leaves no harmful chemical residues and foul odors making it safe for use around children and pets.

Why Should You Use Demize EC ?

Demize EC uses natural insecticides to eliminate flea infestations. It is non-staining, effective and totally safe for use inside homes.

Directions for Demize EC Use

Shake well before use. Mix 2 to 3 fluid ounces of the insecticide with 1 gallon of water to produce a spray solution. Use as a broadcast spray and treat commonly infested areas and objects such as rugs, carpets, pet sleeping quarters, under cushions, cracks and crevices, around baseboards and other sites known to harbor fleas. Solutions are NOT intended for use in pets.

Where to Apply Demize EC

For use in and around residential, commercial, agricultural, industrial buildings and animal housing facilities.

DRAGNET SFR Product Label

DRAGNET SFR Material Safety Data Sheet (MSDS)

Dragnet SFR - 1 Qt

From the makers of CB Residuals and Talstar insecticides comes another revolutionary termiticide with enhanced residual and contact kill capabilities. FMC's Dragnet SFR Termiticide/Insecticide does not break down easily in soil and retains its potency for extended periods of time. Specially formulated for subterranean termites, Dragnet also targets a wide range of indoor and outdoor pest insects. Versatile and very economical, one quart yields 100 gallons of solution that can be used in a variety of applications.

Why Should You Use Dragnet SFR ?

Dragnet SFR is superior in both residual control and contact kills to more than 50 insects in its label.

Directions for Dragnet SFR Use

Dragnet SFR is a concentrate that must be diluted in water to create emulsions. Active ingredient content may vary from 0.5% to 2.0% depending on treatments or target pests. Use this product for pre-construction treatments of structures or to treat existing termite infestations in and around buildings and structures. Knowledge of treatment techniques such as rodding, trenching, sub-slab injections, void injections and crack and crevice treatments is essential in order to have effective control of termites. Use this product for residual pest control in and on buildings and their immediate surroundings. Dragnet SFR may be used in broadcast applications, spot applications, crack and crevice injections or as a paint-on treatment. Consult the product label for more details.

Where to Apply Dragnet SFR

Dragnet SFR is for use in and around residential, commercial, public and industrial buildings. This includes homes, apartments, laboratories, greenhouses, non-food areas of food handling store areas, warehouses, schools, nursing homes, hospitals, transports and food processing, manufacturing and servicing establishments.

Eco Exempt IC 2 Product Label

Eco Exempt IC 2 Material Safety Data Sheet (MSDS)

Eco exempt IC-2 Insecticde (Essentria IC - 3)

Eco exempt IC-2 Insecticde (Essentria IC - 3) uses a knockdown method to kill pests the minute they come into contact with it. EcoExempt IC is an all-natural substance made from oils such as rosemary, wintergreen, and eugenol. Unlike chemical pesticides, EcoExempt IC-2 leaves behind a botanical scent. EcoExempt IC- 2 works great for corners, cracks, and crevices.

Inside: Apartment buildings, bakeries, beverage plants, bottling facilities, breweries, cafeterias, candy plants, canneries, cereal processing and manufacturing plants, dairy barns, poultry facilities, flour mills, food processing plants, frozen food plants, homes, hospitals, hotels, houses, industrial buildings, kennels, kitchens, laboratories, manufacturing facilities, mausoleums, meat processing and packaging plants, meat and vegetable canneries, motels, nursing homes, office buildings, restaurants, schools, stores, supermarkets, warehouses, and similar structures.

Outside:Building foundations, dairy facilities, drive-in restaurants, drive-in theaters, golf courses, parks, playgrounds, poultry houses, recreational areas, schools, urban areas, lawns, landscape areas, trees, turf, and zoos.

For sensitive indoor/outdoor surfaces such as vinyl, plastic, fabric, wood floors, etc. test a small non-visible area first before spraying. This includes vinyl siding, outdoor furniture, storm doors and windows, etc. It is possible that EcoEXEMPT IC2 may mar some sensitive surfaces. If spray gets on any sensitive surface that is listed, simply rinse with water and wipe off with clean cloth. EcoEXEMPT IC2 may be diluted with water or oil and applied with conventional application equipment including, but not limited to, compressed air sprayers and power sprayers. When diluting with water, prepare only the amount needed for immediate use and maintain agitation during use. Do Not Store Spray Solution Overnight. For oil dilutions that are applied in food handling establishments, a deodorized petroleum oil which conforms to CFR 21 (especially section 172.884) is required (such as Exxon Isopar M, Ashland Low Odor Base Solvent, or the equivalents). Tank mix applications must be made in accordance with the more restrictive of label limitations and precautions. No label dosages may be exceeded. This product cannot be tank mixed with any product with label prohibitions against such mixing.

Advantages of EcoEXEMPT IC-2

Quick knockdown/kill
Residual protection
Flexible label
Indoor/outdoor use
Broad spectrum
Non-staining
Highly versatile
Low aquatic toxicity
For conventional, misting and fogging equipment
Great for mosquito control programs
New softer botanical scent
May be used for on-animal applications

Do not apply directly to house plants. Cover/avoid any pools or aquaria prior to spraying.

GENERAL PEST CONTROL with Eco EXEMPT IC - 2:

To control accessible, exposed stages of crawling insects including, but not limited to, Ants, Cockroaches, Cadelles, Cigarette Beetles, Dark Mealworms, Dried Fruit Beetles, Drugstore Beetles, Confused Floor Beetles, Grain Mites, Fowl mites, Mites, Red Flour Beetles, Rice Weevils, Saw-toothed Grain Beetles, Spiders, Spider Beetles, Termites, Yellow Mealworms in sites that include, but are not limited to, apartments, homes, restaurants, food processing plants, industrial installations and warehouses, dilute at the rate of up to .5 to 6 fluid ounces of EcoEXEMPT IC2 per gallon of water (use lower rate for maintenance service and higher rates for active infestations). Thoroughly spray non-visible areas where these insects are usually found with special attention to cracks and crevices, niches, dark corners, drains and other harborage sites. To prevent potential discoloring, do not spray on visible areas (i.e. baseboards, door frames, walls, etc.) and wipe away excess. Food processing operations may continue when EcoEXEMPT IC2 is applied as a surface, spot or crack and crevice treatment in accordance with the directions and precautions given above.

FOGGING with Eco EXEMPT IC - 2:

To control crawling and flying insects (Flies, Moths, Fruit Flies, etc) in sites that include, but are not limited to, food processing plants, (INCLUDING USDA INSPECTED FACILITIES), industrial installations, animal quarters (cattle barns, horse barns, poultry barns, swine houses, zoos and warehouses), EcoEXEMPT IC2 may be applied as a space spray through conventional fogging equipment. Cover or remove exposed food and cover food-handling surfaces in edible product areas of food handling establishments. Also cover sensitive surfaces (plastics, etc). Close and shut off air conditioning or ventilating equipment. Mix 4 to10 ounces of EcoEXEMPT IC2 insecticide with sufficient oil to equal 1 gallon of diluted spray. (It is recommended to use lower rates in most food facility applications). Apply at a rate of 1 to 3 fluid ounces per 1000 cubic feet, filling the room with mist (or fog, if thermal equipment is used). Keep area closed for at least 15 minutes. Vacate treated area. Ventilate before reoccupying. Fogging may create slippery conditions on painted floor surfaces. Retreat if reinfestation occurs. The product does contain plant oils that are inherently fragrant. When used in confined spaces, prolonged exposure to the fragrance may be objectionable to some individuals.

Masterline Bifenthrin 7.9 Product Label

Masterline Bifenthrin 7.9 Material Safety Data Sheet (MSDS)

Masterline Bifenthrin 7.9 Brochure

Masterline Bifenthrin 7.9

Univar's Masterline Bifenthrin Insecticide/Termiticide offers superior control of indoor and outdoor pests such as termites, cockroaches, ants and many more. Its active ingredient, Bifenthrin, is popular for its broad spectrum of control and excellent residual properties. With Masterline's powerful residual formulation, expect effective and lasting control the toughest pest infestations in and around your homes.

Why Should You Use?

Masterline Bifenthrin 7.9 targets several indoor and outdoor pests. This highly versatile product is the solution to all your indoor and outdoor pest problems.

Directions for Use

Masterline Bifenthrin 7.9 is an emulsifiable concentrate intended for water dilutions. Finished solutions can be used for general surface treatments, crack and crevice treatments or spot applications. Finished emulsions may be converted to foam using suitable foaming agents. Insect growth regulators and other pesticides may be tank mixed together with the product unless explicitly prohibited by the product label. Masterline is excellent for use in treating termite infestations. Technicians must be familiar with termite control techniques such as trenching, rodding, sub-slab injection and coarse spray application for effective use of the product. Apply finished emulsions using appropriate equipment such as hand held or powered sprayers, brushes, foam applicators and other similar application equipment. Carefully read the product label for application directions, dilution rates and application rates.

Where to Apply

Masterline controls pests indoors and outdoors on residential, commercial, institutional, public, commercial and industrial buildings. Areas of use also include lawns, ornamental plants, interiorscapes, recreational areas and athletic fields.

Mavrik Perimeter Product Label

Mavrik Perimeter Material Safety Data Sheet (MSDS)

Mavrik Perimeter Supplemental Label

Mavrik Perimeter - 8 oz.

Mavrik is with a broad spectrum pyrethroid that controls an array of pests that infest areas around the perimeter of residential and commercial buildings. Mavrik provides immediate knockdown of a variety of insects including ant and mosquitoes outsdoors and once dried, it leaves no visible residues or lingering odor that are non-toxic and non-repellent to honeybees.

For Use in and around: Lawns, Gardens, Trees, Shrubs, Roses, Flower beds - See the Mavrik Perimeter Label for a complete list of application sites.

How It Works

Controlling ants and mosquitoes in your customers' yards is a great way to keep both from becoming major problems in and around your customers' homes. Mavrik Perimeter contains the pyrethroid fluvalinate, which provides quick knockdown of pests.

Speckoz Evercide Esfenvalerate EC Product Label

Speckoz Evercide Esfenvalerate EC MSDS

Speckoz Evercide Esfenvalerate EC - 16 oz.

Speckoz Evercide features Esfenvalerate, a synthetic pyrethroid insecticide less toxic and more potent than other pyrethroids. Flexible and highly effective, Speckoz can be diluted in oil or in water, offering the superior residual performance regardless of the diluent. Due to its low toxicity and application rates, the product is labeled for use in food and non-food areas of commercial and industrial structures.

Why Should You Use?

Speckoz Evercide EC can be used in food handling areas. Speckoz can be diluted in water or in oil for extended residual control.

Directions for Use

Depending on the target pest, mix one or two ounces of Speckoz per gallon of water/ oil to produce a solution containing 0.027% and 0.05% active ingredient. Apply as a coarse, wet spray at the rate of 1 gallon per 1,000 square feet of surface area. Insect growth regulators or pyrethroid insecticides may be tank mixed with the product unless prohibited by the product label/s. Do NOT tank mix products with dichlorvos (DDVP).

Treat surfaces where insects are normally found, in baseboards, cabinets and shelves, underneath sinks and equipment, in floors and walls, floor drains, door and window frames, garbage cans, utility installations and other harborage sites. Pay particular attention to cracks, crevices and voids in walls and floors. If necessary drill holes in damaged wooden structures to kill wood destroying insects. Treat outdoor surfaces at the rate of 1 gallon of mixture per 1,000 square feet.

Speckoz may be used as a space spray at the maximum dilution rate of 10 ounces of concentrate per gallon of oil. Apply using mechanical foggers capable of producing aerosol particles less than 30 microns. Before treatment, close all doors and windows in treatment area. Shut off air conditioning units and ventilating systems before proceeding. Direct spray into cracks and crevices, under and behind equipment and appliances, or dark harborage areas before commencing the space treatment. Direct the spray upwards towards the ceiling and corners at the rate of 1 ounce per 1,000 cubic feet of space. Evacuate the treated area and keep the area closed for 30 minutes. Ventilate before occupying.

Where to Apply

Speckoz is for use in food and non-food areas of homes, apartments, schools, warehouses, office buildings, hotels, motels, kennels, food processing and manufacturing plants, food service establishments and transportation equipment.

Product Label

Material Safety Data Sheet (MSDS)

Suspend SC Brochure

Suspend SC - 1 Pint

Suspend SC provides effective knockdown and long term residual control of over fifty pests. Very low usage rates makes the product safe to use in food handling areas, mattresses, furniture, cushions and other surfaces where sensitivity is an issue. Suspend SC residues have no odor or visible residues and will not damage surfaces where water alone causes no damage.

Why Should You Use?

Suspend is more economical, flexible and effective compared to other concentrates.

Directions for Use

Mix Suspend with water following the dilution rates in the product label. Active ingredient concentration in solutions range from 0.01% to 0.06%, depending on the target pest/s. Apply using hand pressurized or power operated sprayers. Shake well before using. Partially fill applicator tanks 1/2 full with water before adding the proper amount of concentrate. Agitate the tank and add the remaining volume of water. Re-agitate to obtain a uniform mixture. The product may be tank mixed with currently registered pesticides and insect growth regulators unless prohibited by the product label. Solutions can be converted to foam used in treating structural voids. Mix Suspend SC with a foaming agent following the mixing instructions as indicated in the foaming agent label.

Use finished solutions for crack and crevice, spot and surface treatments indoors. Use 0.25 to 1.5 ounces of Suspend per gallon of water to treat 1,000 square feet of surface. Apply as a coarse low pressure spray to cracks, crevices, voids and other sites where insect live, feed and breed. Apply as directed in the product label.

Use Suspend SC as a residual or broadcast spray to perimeters, lawns, grounds, landscapes and ornamental plants. Apply as a coarse, low-pressure spray to outdoor building surfaces, porches, patios, eaves, screens, window frames, garbage dumps, lawns and ornamental plants. Treat a band of soil 6 to 10 feet wide around and adjacent to buildings and structures. Treat foundations up to a height of 3 feet.

Control wood-damaging insects by applying spray or foam solutions having 0.06% Deltamethrin. Using the appropriate application equipment, apply solutions to infested surfaces and damaged wooden structures. Inject solutions inside termite carton nests and damaged wood. Drill holes if necessary. Apply as a coarse fan spray to exposed insects and infested surfaces.

For broadcast application in lawns, apply using a minimum of 2 gallons per 1,000 square feet. Use higher volumes for adequate coverage of thick foliage. Apply thoroughly and uniformly over turfgrass and ornamentals.

Where to Apply

Suspend SC is for residential, commercial, industrial and institutional control of the listed pests. Areas of use include apartments, bakeries, bottling facilities, breweries, cafeterias, canneries, food manufacturing and processing plants, food service establishments, granaries, hospitals, hotels, kitchens, laboratories, nursing homes, office buildings, restaurants, schools, warehouses and transports such as aircraft, buses, mobile homes, ships, trailers and trucks.

Tempo SC Ultra Product Label

Tempo SC Ultra Material Safety Data Sheet (MSDS)

Tempo SC Ultra - 8 oz.

Tempo SC Ultra is an odor less and stainless product. Tempo SC is concentrated formula that is mixed with water before using. Tempo SC Ultra is used both indoors and outdoors. One bottle of Tempo Ultra makes up to 30 gallons. When using this product we recommend that you use a pest control product tool such as Chapin Premier 1 or 2 Gallon sprayer.

Application with Tempo SC Ultra

Apply where pests have been seen or found, or can find shelter (in and around buildings and structures, on residental, commercial and recreational areas of turf, on ornamentals in landscapes and interior plantscapes). Makes up to 30 gallons of finished spay solution for indoors. Treats up to 30,000 sq ft. outdoors. Mix the appropriate amount of Tempo SC with water. May tank mix with other pesticides currently registered for similar uses. Reapply every 7 to 10 days, if needed. For turf, reapply if needed, but not more than 6 times per year.

Temprid SC Product Label

Temprid SC Material Safety Data Sheet (MSDS)

Temprid SC Supplemental Lable

Temprid SC Insecticide - 400ml

Temprid SC (Suspension Concentrate Formulation) insecticide is an easy-to-use and provides quick knockdown and long residual control of more than 50 pests by combining the broad spectrum, fast-acting control of beta-cyfluthrin with the systemic residual control of imidacloprid to provide premium performance and effecacy.

Tempirid SC's Advantages:

Delivers unsurpassed ant control.
Also eliminates aphids, scale and mealy bugs that produce honeydew, a preferred food source of many ant species.
The only perimeter pest control product you will ever need
Broad spectrum insecticide - controls perimeter pests that some competitive products don't.
Flexible label.
Can be applied outdoors and indoors.
Can be applied as a perimeter application 3 ft up and 10 ft out from the structure.
Better pest stopping power than non-repellents.

Product Label

Material Safety Data Sheet

Tengard SFR One - 1 Quart

Tengard SFR One's active ingredient has the ability to kill over 75 different types of pest. The permethrin in Tengard SFR One has a long lasting and increases effective. Tengard SFR One can be used indoors and outdoors, when used outdoors it dispersed in the soil and establish a barrier between the structure and the termites in the soil. Tengard SFR One is a pesticide that kill pest but also as a prevention.

Mix the termiticide use dilution in the following manner:

1. Fill tank 1/4 to 1/3 full.
2. Start pump to begin by-pass agitation and place end of treating tool in tank to allow circulation through hose.
3. Add appropriate amount of Tengard SFR. (See Rate/Volume Conversion Chart)
4. Add remaining amount of water.

Application Volume: To provide maximum control and protection against termite infestation apply the specified volume of the finished water emulsion and active ingredient as set forth in the directions for use section of this label. If soil will not accept the labeled application volume, the volume may be reduced provided there is a corresponding increase in concentration so that the amount of active ingredient applied to the soil remains the same.

NOTE: Large reductions of application volume reduce the ability to obtain a continuous barrier. Variance is allowed when volume and concentration are consistent with label directed rates and a continuous barrier can still be achieved.

Bifen IT Product Label /

Bifen IT Material Safety Data Sheet (MSDS)

Bifen IT - 1 Quart

Bifen I/T (Insecticide/Termiticide) is one of the most potent insecticides in the market. With 7.9% Bifenthrin, the product is highly effective in controlling a wide variety of pest insects, including various species of subterranean termites. Bifen I/T is specially formulated to control termite and insect infestations around commercial, residential and industrial structures.

Why Should You Use BIFEN I/T ?

Bifen I/T contains high concentrations of Bifenthrin to control and prevent termite and insect infestations. In addition, the product leaves a long-lasting residual effect that last for months.

Directions for Bifen IT Use

Applying Bifen I/T requires the use of suitable application equipment and personal protective equipment. The product is extremely toxic. Please refer to the product label before using or handling the product. Please read the product label for information on treatments, dilutions and application methods. Depending on the target pest and the method of application, Bifen I/T should be applied using the correct methods as stated in the product label. The product can be used for broadcast treatments, perimeter treatments, crack and crevice applications, sub-slab injections and residual barrier treatments. For subterranean termite control, methods may be employed such as trenching, rodding, crack and crevice injection or absorption for effective control.

Bifen I/T can also be used to control Armyworms, Cutworms, Sod Webworms, Annual Bluegrass Weevils, Billbugs, Black Turfgrass Ataenius, Leafhoppers, Mealybugs, Ants, Centipedes, Chinch Bugs, Fleas , Imported Fire Ants, Millipedes, Mole Crickets, Ticks, Pillbugs, Sowbugs and European Crane Flies. Please read the product label for directions and mixing instructions.

Where to Apply Bifen IT

Use Bifen I/T to treat infested areas in and around residential, commercial, public and industrial buildings. The product is for use in lawns, parks, recreational areas and athletic fields.

Talstar Pro Product Label

Talstar Pro Material Safety Data Sheet (MSDS)

Talstar Pro (formerly Talstar One) - 1 pint

Talstar Pro formerly known as Talstar One's name means one professional product for all control. Talstar Pro is able to target over 75 different pests and is great for in and outdoor uses. Talstar Pro is a long lasting residual that lasts up to 3 months, it is odorless, leaves a clear residual, leaves no stain, non- irritating on the skin and does not break down easily with rain. Talstar Pro is also well known for its effectiveness with termites. With Talstar Professional insecticide you know you'll get the job done right every time. That's because it gives you superior, long-lasting control of the toughest general pests and termites. In fact, Talstar is effective on more than 75 pests. Plus, it's approved for multiple use-sites, so you can use it almost anywhere - indoors, outdoors, industrial, commercial and food-handling areas.

Proven, flexible protection indoors. Talstar Professional is an effective insecticide that's tough on ants and general household pests. In fact, its multi-use label makes it so versatile, you can trust it to provide effective indoor control of bed bugs, fleas, flies, scorpions, spiders and cockroaches almost anywhere, including: industrial and commercial sites, kitchens, restaurants, supermarkets and food processing plants.

Reliable, long-lasting protection outdoors. For outside and perimeter jobs, Talstar Professional is labeled for a broad spectrum of perimeter pests and provides long-lasting residual control of everything from fleas, ticks and flies to mosquitoes, mites, millipedes and termites.

Plus, it's non-staining and contains no odorous or plant-damaging solvents. Once it dries, it is virtually impossible to tell where it has been sprayed. Even better, it leaves no unsightly residues and causes no known phytotoxicity.

Put an end to fire ant colonies fast. Talstar Professional can even be used to destroy fire ant colonies. Simply drench the mound for 95% control in 24 hours, and then apply a broadcast application to eliminate re-infestation of invading fire ants for up to six months.

To control Bees, Wasp, Hornets, and Yellow-Jackets apply a 0.06% emulsion. Application should be made in the late evening when insects are at rest. Spray liberally into hiding and breeding places, especially under attic rafters, contacting as many insects as possible. Retreatment may be necessary to achieve and/or maintain control during periods of high pest pressure. Repeat application is necessary only if there are signs of renewed insect activity. Important: Do not apply emulsion until location of heat pipes, ducts, water and sewer lines and electrical conduits are known and identified. Caution must be taken to avoid puncturing and injection into these structural elements. Do not apply into electrical fixtures, switches, or sockets.
In the home, all food processing surfaces and utensils in the treatment area should be covered during treatment or thoroughly washed before re-use. Remove pets, birds, and cover aquariums before spraying. Do not permit humans or pets to contact treated surfaces

Talstar Pro formerly known as Talstar One's name means one professional product for all control. Talstar Pro is able to target over 75 different pests and is great for in and outdoor uses. Talstar Pro is a long lasting residual that lasts up to 3 months, it is odorless, leaves a clear residual, leaves no stain, non- irritating on the skin and does not break down easily with rain. Talstar Pro is also well known for its effectiveness with termites. With Talstar Professional insecticide you know you'll get the job done right every time. That's because it gives you superior, long-lasting control of the toughest general pests and termites. In fact, Talstar is effective on more than 75 pests. Plus, it's approved for multiple use-sites, so you can use it almost anywhere - indoors, outdoors, industrial, commercial and food-handling areas.

Evergreen Pyrethrins Material Safety Data Sheet (MSDS)

Evergreen Pyrethrins (PyGanic PRO) - 1 pint

Evergreen Pyrethrins is a broad spectrum insecticide for use in both certified organic production and situations where a botanical insecticide fits the needs of the customer.

Advantages of Evergreen Pyrethrins Insecticide

Delivers fast, effective control of insects including Ants, Cockroaches, and Stored Product Pests.
Contains pyrethrum - a botanical insecticide derived from a chrysanthemum flower.
Food and Non-Food Areas of Food Handling Processing facilities.
For use in Certified organic barns, dairies, and poultry houses.

FenvaStar EcoCap Product Label

FenvaStar EcoCap Material Safety Data Sheet (MSDS)

FenvaStar EcoCap - 8oz.

Fenvastar EcoCap is a microencapsulated suspension concentrate containing 0.3 pounds active ingredient per gallon.

Fenvastar EcoCap is designed to provide long residual activity against pests listed on this label when applied as surface or spot treatments or as a crack and crevice spray in and around residential and commercial structures, as well as on turf and landscaping. Fenvastar EcoCap may be sprayed on any surface that will not be stained by water. DO NOT use this product as a fogger or apply it as a space spray. Do not apply in electrical conduits, junction and switch boxes, motor housings, or other electrical equipment due to shock hazard from water-based spray.

Fenvastar EcoCap should be mixed with water and applied with hand pressurized or power operated sprayers. Shake container of Fenvastar EcoCap before diluting. Clean spray equipment before use. For dilution, add approximately half the required water to spray tank and then add the appropriate amount of Fenvastar EcoCap. Agitate and slowly add the remaining water. Agitate spray thoroughly before using and also occasionally during use to ensure dispersion.

Apply as a course, wet spray to surfaces where these pests are normally found. Treat floors, baseboards, around doors and windows, in attics, crawl spaces, eaves, corners, closets, walls, utility pipes, storage areas, and all cracks and crevices. Treat underneath sinks, dishwashers, refrigerators, stoves, the underside of shelves, drawers, cabinets, areas behind pipes, and in all places where these insects shelter. Contact as many insects as possible with direct spray. Repeat applications as needed, but do not exceed more than one (1) application every seven (7) days.

Please refer to and follow the instructions on the Product label.

MANGE DIP Product Label

MANGE DIP Material Safety Data Sheet (MSDS)

FLEA, TICK, AND MANGE DIP - Pint.

Flea, Tick, and Mange Dip by Martin's a product that is used on dogs to kill fleas, flies, lice, mange mites, and ticks, including deer ticks, which are ticks that can be carriers of Lyme disease.

To use Flea, Tick, and Mange Dip on dog premises, thoroughly spray the infestated areas, pets beds or resting quarters, and where the dogs play frequently. Fresh bedding should be placed in the pet bed or resting quarters following the treatment. Do not spray this product onto food or water. Repeat application of Flea, Tick, and Mange Dip Insecticide as needed but not more than once every two weeks. To dilute the solution for a premise spray, mix 4 fl. oz. of Flea, Tick, and Mange Dip to 1 gallon of water.

To use Flea, Tick, and Mange Dip on animal, thoroughly wet the animal by dipping, sponging, or spraying. To dilute the solution for animal dip, mix 2 fl. oz. of Flea, Tick, and Mange Dip to 1 gallon of water. After application, allow the animal to dry in a warm place. Do not rinse or towel off the animal. NOTE: Do not reapply the treatment for 3 weeks and please consult with a veterinarian before applying this product on aged, debiliated, pregnant, and nursing animals or animals that are medicated. Also keep in mind that sensitivities or reactions may occur after using ANY pesticide for pets. If you do notice that sensitivities occur, bathe your pet with lots of water and mild soap. If sensitivities continue, consult a veterinarian immediately.

FLY-BAN Product Label

FLY-BAN Material Safety Data Sheet (MSDS)

Martin's Fly-Ban Synergized Pour-On - Qt.

Martin's Fly-Ban Synergized Pour-On Treatment is a formula that uses the active ingredient Permethrin and the synergist Piperonyl Butoxide to control flies, keds, lice, gnat, ticks and other labeled insects on beef cattle, lactating and non-lactating dairy cattle, calves, horses, foals, sheep, and lambs. It is easily applied as a pour on application or a wipe on, back rubber, or ready to use spray application. Please refer to the product label for complete list of pests and directions on application.

For Lactating and Non-lactating Dairy Cattle, Beef Cattle, and Calves:

Apply 1.5ml per 100 lbs body weight of animal to a maximum of 15ml for any one animal. For heavy infestations of horn-flies, apply 2.0ml per 100 lbs body weight of animal to a maximum of 20ml for any one animal.

To use as a pour-on application: pour the correct dose along the back and down the face but do not put in contact with eyes. To use as a ready-to-use spray, use undiluted concentrate in a mist sprayer to apply the correct dose and apply directly to the neck, face, back, legs, and ears.

To use for a back rubber application: mix 64ml. per gallon of mineral oil.

For Sheep and Lambs:

To use as a pour-on application: apply 1ml per 50 lbs body weight of animal with a maximum of 12ml for any one animal. NOTE: For optimum control, all animals in the flock should be treated after they have been sheared.

FLY-BAN Product Label

FLY-BAN Material Safety Data Sheet (MSDS)

Martin's Fly-Ban Synergized Pour-On - 1/2 Gal.

Martin's Fly-Ban Synergized Pour-On Treatment is a formula that uses the active ingredient Permethrin and the synergist Piperonyl Butoxide to control flies, keds, lice, gnat, ticks and other labeled insects on beef cattle, lactating and non-lactating dairy cattle, calves, horses, foals, sheep, and lambs. It is easily applied as a pour on application or a wipe on, back rubber, or ready to use spray application. Please refer to the product label for complete list of pests and directions on application.

For Lactating and Non-lactating Dairy Cattle, Beef Cattle, and Calves:

Apply 1.5ml per 100 lbs body weight of animal to a maximum of 15ml for any one animal. For heavy infestations of horn-flies, apply 2.0ml per 100 lbs body weight of animal to a maximum of 20ml for any one animal.

To use as a pour-on application: pour the correct dose along the back and down the face but do not put in contact with eyes. To use as a ready-to-use spray, use undiluted concentrate in a mist sprayer to apply the correct dose and apply directly to the neck, face, back, legs, and ears.

To use for a back rubber application: mix 64ml. per gallon of mineral oil.

For Sheep and Lambs:

To use as a pour-on application: apply 1ml per 50 lbs body weight of animal with a maximum of 12ml for any one animal. NOTE: For optimum control, all animals in the flock should be treated after they have been sheared.

FLY-BAN Product Label

FLY-BAN Material Safety Data Sheet (MSDS)

Martin's Fly-Ban Synergized Pour-On - Gal.

Martin's Fly-Ban Synergized Pour-On Treatment is a formula that uses the active ingredient Permethrin and the synergist Piperonyl Butoxide to control flies, keds, lice, gnat, ticks and other labeled insects on beef cattle, lactating and non-lactating dairy cattle, calves, horses, foals, sheep, and lambs. It is easily applied as a pour on application or a wipe on, back rubber, or ready to use spray application. Please refer to the product label for complete list of pests and directions on application.

For Lactating and Non-lactating Dairy Cattle, Beef Cattle, and Calves:

Apply 1.5ml per 100 lbs body weight of animal to a maximum of 15ml for any one animal. For heavy infestations of horn-flies, apply 2.0ml per 100 lbs body weight of animal to a maximum of 20ml for any one animal.

To use as a pour-on application: pour the correct dose along the back and down the face but do not put in contact with eyes. To use as a ready-to-use spray, use undiluted concentrate in a mist sprayer to apply the correct dose and apply directly to the neck, face, back, legs, and ears.

To use for a back rubber application: mix 64ml. per gallon of mineral oil.

For Sheep and Lambs:

To use as a pour-on application: apply 1ml per 50 lbs body weight of animal with a maximum of 12ml for any one animal. NOTE: For optimum control, all animals in the flock should be treated after they have been sheared.

HORSE AND STABLE Product Label

HORSE AND STABLE Material Safety Data Sheet (MSDS)

Martin's HORSE AND STABLE RTU MULTI-USE INSECTICIDE - Qt.

Martin's Horse and Stable Multi Use Insecticide is a ready to use formula that is applied to stable animals and other listed animals to control such insects like flies, fleas, ticks, mosquitoes, and more.

Livestock Animals:

Use Martin's Horse and Stable Multi Use Insecticide on livestock animals like cattle, goats, sheep, hogs, and horses to protect them from horn flies, face flies, house flies, mosquitoes, gnats, and more. To use Martin's Horse and Stable Multi Use Insecticide on livestock animals, apply the product as a light mist that is sufficient enough to wet the surface of the hair. DO NOT spray into the eyes of the animal. Repeat the treatment daily or at intervals necessary to give the animal a continued protection.

Dogs:

Martin's Horse and Stable Multi Use Insecticide can also be used on dogs to control such pests as fleas, ticks, and lice. To use Martin's Horse and Stable Multi use Insecticide on dogs, spray by starting at the tail and moving the dispenser rapidly. Make sure the entire body is covered, including the legs and underbody of the animal. While you are spraying the treatment, fluff the hair of the animal so that it spray will not penetrate to the skin. The spray should be applied so that it wets the fur thoroughly, but do not saturate the animal with the treatment. Use protective gloves when you are applying the product and allow enough time for the dog to completely dry.

DO NOT apply product to genetalia. Repeat the treatment every two weeks as necessary.

DO NOT use on puppies that are younger than 12 weeks old and this product cannot be applied to cats or kittens.

HORSE AND STABLE Product Label

HORSE AND STABLE Material Safety Data Sheet (MSDS)

Martin's HORSE AND STABLE RTU MULTI-USE INSECTICIDE - Gal.

Martin's Horse and Stable Multi Use Insecticide is a ready to use formula that is applied to stable animals and other listed animals to control such insects like flies, fleas, ticks, mosquitoes, and more.

Livestock Animals:

Use Martin's Horse and Stable Multi Use Insecticide on livestock animals like cattle, goats, sheep, hogs, and horses to protect them from horn flies, face flies, house flies, mosquitoes, gnats, and more. To use Martin's Horse and Stable Multi Use Insecticide on livestock animals, apply the product as a light mist that is sufficient enough to wet the surface of the hair. DO NOT spray into the eyes of the animal. Repeat the treatment daily or at intervals necessary to give the animal a continued protection.

Dogs:

Martin's Horse and Stable Multi Use Insecticide can also be used on dogs to control such pests as fleas, ticks, and lice. To use Martin's Horse and Stable Multi use Insecticide on dogs, spray by starting at the tail and moving the dispenser rapidly. Make sure the entire body is covered, including the legs and underbody of the animal. While you are spraying the treatment, fluff the hair of the animal so that it spray will not penetrate to the skin. The spray should be applied so that it wets the fur thoroughly, but do not saturate the animal with the treatment. Use protective gloves when you are applying the product and allow enough time for the dog to completely dry.

DO NOT apply product to genetalia. Repeat the treatment every two weeks as necessary.

DO NOT use on puppies that are younger than 12 weeks old and this product cannot be applied to cats or kittens.

FLEE Product Label

FLEE Material Safety Data Sheet (MSDS)

Martin's FLEE Insecticide Spray - 6.5 oz.

This product is a new product released in the Martin's line of pest control products by the manufacturer Control Solutions. It is a long-lasting, fast-acting, waterproof spray that has the same Fipronil active ingredient that is used in Frontline Spray. Martin's Flee Spray provides fast and effective control of fleas and ticks and can be sprayed onto dogs, cats, puppies, and kittens. It is easy to use with a quiet applicator and can be easily applied onto your pet from any angle to treat even hard to reach places. Martin's Flee Spray dries quickly without a lasting odor and will remain active for up to 4 weeks.

Note: May cause moderate eye irritation. Do not spray dog's or cat's eyes or facial area and do not use on puppies or kittens that are younger than 8 weeks of age. Senstivities may occur and if they do, bathe your pet in large amounts of water and mild soap and consult a veterinarian. Consult a veterinarian before using this product on medicated, debilitated, aged, pregant, or nursing animals.

FLEE Product Label

FLEE Material Safety Data Sheet (MSDS)

Martin's FLEE Insecticide Spray - 12.3 oz.

This product is a new product released in the Martin's line of pest control products by the manufacturer Control Solutions. It is a long-lasting, fast-acting, waterproof spray that has the same Fipronil active ingredient that is used in Frontline Spray. Martin's Flee Spray provides fast and effective control of fleas and ticks and can be sprayed onto dogs, cats, puppies, and kittens. It is easy to use with a quiet applicator and can be easily applied onto your pet from any angle to treat even hard to reach places. Martin's Flee Spray dries quickly without a lasting odor and will remain active for up to 4 weeks.

Note: May cause moderate eye irritation. Do not spray dog's or cat's eyes or facial area and do not use on puppies or kittens that are younger than 8 weeks of age. Senstivities may occur and if they do, bathe your pet in large amounts of water and mild soap and consult a veterinarian. Consult a veterinarian before using this product on medicated, debilitated, aged, pregant, or nursing animals.