Image 70 DG Product Label

Image 70 DG Material Safety Data Sheet (MSDS)

Image 70 DG - 11.43 oz.

Image 70 DG is a selective post- emergenct herbicide which controls grass weeds including crabgrass, certain broadleaf weeds and sedges in established Turf areas including, but not limited to, residential, commercial and institutional lawns of bermudagrass, centipedegrass, St. augustunegrass, and zoysiagrass , commercial sod farms, golf courses, and landscape ornamentals .

The activity of Image 70 DG involves uptake by weed roots and/or foliage and rapid translocation to growing points. Treated Plants stop growing soon after spray application.

The amount of rainfall or irrigation required following application depends on existing soil moisture, density of turf and thatch or other surface vegetation, and soil types. Sufficient rainfall or irrigation of at least 0.25 to 0.5 inch is necessary to for optimum herbicide activation.

Please refer to and follow the instructions on the Product label.

Sedgehammer 1.33 oz. Product label

Sedgehammer Material Safety Data Sheet (MSDS)

SedgeHammer Herbicide - 1.33 Oz.

Sedgehammer is considered one of the more "gentle to turfgrass" products and pets and people can return to the treated area once the spray dries.

Target Pest(s):	Purple nutsedge, Yellow nutsedge, Cyperus roiundus, Cyperus esculentu, Kyllinga
Manufactured By:	Gowan
Active Ingredient:	Halosulfuron-methyl - 75.0%
Size:	1.33 oz
Yield/Application:	Mix 0.9 grams in 1 gallon of water. 1 mixed gallon of solution will cover 1000 sq. ft. One full bottle (1.33 oz.) makes approx. 40 gallons of finished solution. The 0.9 gram pack only makes 1 mixed gallon of solution.
Not For Sale To:	NY

Please refer to and follow the instructions on the Product label.

BASAGRAN Sedge Control Product Label

BASAGRAN Sedge Control Material Safety Data Sheet (MSDS)

BASAGRAN Sedge Control 42% Bentazon - Pint

Basagran Sedge Control herbicide that is manufactured by SouthernAG is a selective, post-emergent herbicide that was made to control nutsedge (nutgrass). It contains 42% Bentazon and can be used on not only established turf, but can also be used on certain ornamentals. Remember that you should remember to read the product label to see all listed areas that Basagran Sedge Control can be used.

Basagran Sedge Control herbicide can be used in a hose end sprayer or a pump sprayer. Use just a low rate of ¾ oz per 1,000 square feet. If necessary, Basagran Sedge Control can be mixed with other herbicides. Use Basagran as an "over the top” application on certain ornamentals (please refer to the product label for the complete list of ornamentals that this product can be used on). Sometimes, two applications may be necessary to control hard-to-get-rid-of weeds like sedges.

Always refer to the product label for dilution and application rates as well as instructions before applying any herbicides or pesticides. 

BASAGRAN Sedge Control Product Label

BASAGRAN Sedge Control Material Safety Data Sheet (MSDS)

BASAGRAN Sedge Control 42% Bentazon - Pint

Basagran Sedge Control herbicide that is manufactured by SouthernAG is a selective, post-emergent herbicide that was made to control nutsedge (nutgrass). It contains 42% Bentazon and can be used on not only established turf, but can also be used on certain ornamentals. Remember that you should remember to read the product label to see all listed areas that Basagran Sedge Control can be used.

Basagran Sedge Control herbicide can be used in a hose end sprayer or a pump sprayer. Use just a low rate of ¾ oz per 1,000 square feet. If necessary, Basagran Sedge Control can be mixed with other herbicides. Use Basagran as an "over the top” application on certain ornamentals (please refer to the product label for the complete list of ornamentals that this product can be used on). Sometimes, two applications may be necessary to control hard-to-get-rid-of weeds like sedges.

Always refer to the product label for dilution and application rates as well as instructions before applying any herbicides or pesticides. 

Hi-Yield 2, 4-D Selective Weed Killer Product Label

Hi-Yield 2, 4-D Selective Weed Killer Material Safety Data Sheet (MSDS)

Hi-Yield 2, 4-D Selective Weed Killer - Qt.

Hi-Yield 2, 4-D Selective Weed Killer is a selective, post-emergent herbicide.

This product will kill or control many Broadleaf Weeds in addition to many other noxious plants susceptible to 2, 4-D.

For Control Of In Lawns, Ponds, Drainage Ditchbanks, Pastures and Rangelands. Alder, American Lotus, Arrowhead, Artichoke, Aster, Austrian Fieldcress, Beggartick, Biden, Bindweed, Bitterweeds, Bitter Winter Cress, Blessed Thistle, Blue Lettuce, Boxelder, Broomweed, Buckhorn, Bull Thistle, Bulrush, Burdock Dandelion, Dock, Dogbane, Duckweed, Elderberry, Fleabane (Daisy), Flixweed, Frenchweed, Galinsoga, Goatsbeard, Goldenrod, Ground Ivy and many others listed on label.

Please refer to and follow the instructions on the Product label.

Hi-Yield 2, 4-D Selective Weed Killer Product Label

Hi-Yield 2, 4-D Selective Weed Killer Material Safety Data Sheet (MSDS)

Hi-Yield 2, 4-D Selective Weed Killer - Gal.

Hi-Yield 2, 4-D Selective Weed Killer is a selective, post-emergent herbicide.

This product will kill or control many Broadleaf Weeds in addition to many other noxious plants susceptible to 2, 4-D.

For Control Of In Lawns, Ponds, Drainage Ditchbanks, Pastures and Rangelands. Alder, American Lotus, Arrowhead, Artichoke, Aster, Austrian Fieldcress, Beggartick, Biden, Bindweed, Bitterweeds, Bitter Winter Cress, Blessed Thistle, Blue Lettuce, Boxelder, Broomweed, Buckhorn, Bull Thistle, Bulrush, Burdock Dandelion, Dock, Dogbane, Duckweed, Elderberry, Fleabane (Daisy), Flixweed, Frenchweed, Galinsoga, Goatsbeard, Goldenrod, Ground Ivy and many others listed on label.

Please refer to and follow the instructions on the Product label.

Fertilome Weed-Out Lawn Weed Killer Product Label

Fertilome Weed-Out Lawn Weed Killer Material Safety Data Sheet (MSDS)

Fertilome Weed-Out Lawn Weed Killer - Pint

Fertilome's Weed-Out Lawn Weed Killer Controls over 200 broadleaf weeds including Dandelion, Chickweed, Clover, Spurge, Wild Onion, Dollar Weed, Ground Ivy and many others listed.

The formulation, Trimec is a patented combination of 3 weed killers: 2-4D, mecoprop and dicamba.

Temperature should be 65°F to 85°F. Concentrate: Mix 2 oz. (4 tablespoons) with 1 gallon of water. 1 pint covers 8,000 sq. ft. in St. Augustine and 6,000 sq. ft. in Bermuda, Fescue and Bluegrass.

Please refer to and follow the instructions on the Product label.

Fertilome Weed-Out Lawn Weed Killer Product Label

Fertilome Weed-Out Lawn Weed Killer Material Safety Data Sheet (MSDS)

Fertilome Weed-Out Lawn Weed Killer - Gal.

Fertilome's Weed-Out Lawn Weed Killer Controls over 200 broadleaf weeds including Dandelion, Chickweed, Clover, Spurge, Wild Onion, Dollar Weed, Ground Ivy and many others listed.

The formulation, Trimec is a patented combination of 3 weed killers: 2-4D, mecoprop and dicamba.

Temperature should be 65°F to 85°F. Concentrate: Mix 2 oz. (4 tablespoons) with 1 gallon of water. 1 pint covers 8,000 sq. ft. in St. Augustine and 6,000 sq. ft. in Bermuda, Fescue and Bluegrass.

Please refer to and follow the instructions on the Product label.

Fertilome Over the Top II Grass Killer Product Label

Fertilome Over the Top II Grass Killer Material Safety Data Sheet (MSDS)

Fertilome Over the Top II Grass Killer- 8 oz

The Fertilome Over the Top II Grass Killer will treat most annual and hard to kill grasses even including those which can grow up to 1 foot high. For usage around vegetables and fruits, this product can be applied at any time on actively growing weeds when it does not exceed the minimum of days from application to harvest. Warm weather optimizes the performance of this product by accelerating the systemic movement from the leaves and stems down to the roots for a complete kill.

Please refer to and follow the instructions on the Product label.

Hi-Yield Weed and Feed Product Label

Hi-Yield Weed and Feed Material Safety Data Sheet (MSDS)

Hi-Yield Weed and Feed 15-0-10 - 18 lbs.

Hi-Yield Weed and Feed contains Trimec post-emergent broadleaf weed herbicide in combination with lawn fertilizer, 15-0-18.

Hi-Yield Weed and Feed Controls undesirable broadleaf weeds such as Dandelion, Chickweed, Knotweed, Plantain, Henbit, Spurge and many others listed in established lawns (Warm and cool season grasses).

When applying Hi-Yield Weed and Feed 15-0-10 it is recommended it be spread using a spreader for an even spread throughout.

To ensure optimum control, irrigate the treated area with water before and in 24 hrs after application

Please refer to and follow the instructions on the Product label.

Endrun Herbicide with Trimec Product Label

Endrun Herbicide with Trimec Material Safety Data Sheet (MSDS)

Endrun Herbicide with Trimec - 1 Gal

EndRun Herbicide with Trimec is comprised with a post-emergent element in the herbicide. It also uses naturally mixed chemicals that are less hazardous for one's health. Moreover, like the Trimec 992 the EndRun solution is effective in keeping off weeds from shooting around your planted crops. Basically the EndRun Herbicide has been proven and tested as a good crop agent to discourage parasites from thriving. It prevents clovers, dandelions, chickenweed and other weeds that try to absorb the nutrients for the crops.

Directions for Use:

Use EndRun in accordance to the rules under the Worker Protection Standard. Whole body jumpsuits are required and apply with the use of gloves.

Apply EndRun chemical on the broadleaf weeds that are actively growing around the crop are. Follow-up applications are required for dense infestations of perennial and biennial weeds. Endrun is effective in preventing the growth of newly sodden, sprigged, or plugged grasses. However, applying this product to "Floratam" St. Augustine grass is discouraged. The application of EndRun to newly sodden, sprigged, or plugged grasses should be delayed until 3 to 4 weeks after the sodding, sprigging, or plugging operations. The treatment is also effective for bermuda grass, zoysia grass, and bahia grass which have remained dormant in growth for some time.

EndRun Application goes by proportion. The total volume of the solution to be used greatly depends on the total area to be covered and the type of plants to be treated. A small amount of spray is needed for regular growth control of sensitive weed species. The heavier amount of the EndRun solution is needed for dense infestations of perennial weeds, for adverse/extreme environmental conditions, and for weeds beyond the appropriate growth stages.

Where to Apply Endrun Herbicide with Trimec?

Endrun is intended to be used on sodded farms. Also it is a good maintenance solution to be used by lawn care operators and landscape personnel for the ornamental lawns and the turf areas planted in institutional, ornamental, and residential/domestic sites.

Please refer to and follow the instructions on the Product label.

Battleship III Herbicide Product Label

Battleship III Herbicide Material Safety Data Sheet (MSDS)

Battleship III Herbicide - 2.5 Gals

BATTLESHIP III Three-way HERBICIDE is a post-emergent, selective broadleaf Weeds herbicide.
Battleship III is a 2,4-D-free formulation that can be used in established ornamental turf lawns (cool and warm-season turfgrass), Parks, Cemeteries, Athletic Fields, Roadsides and Golf Courses.

BATTLESHIP III HERBICIDE controls annual and perennial broadleaf weeds such as Dandelion, Chickweed, Black Medic, Knotweed, Plantain, Oxalis, Clover, Cocklebur, Thistle and many others listed. Add a spray adjuvant, such as DYNEAMIC for optimum result.

Please refer to and follow the instructions on the Product label.

GRASS OUT MAX Product Label

GRASS OUT MAX Material Safety Data Sheet (MSDS)

AGRISEL GRASS OUT MAX HERBICIDE - Qt

Grass Out Max is a post-emergent selective herbicide used to control more than 50 annual and perennial grasses.
GRASSOUT MAX HERBICIDE does not control sedges or broadleaf weeds. This product kills only Grasses.
Grass Out Max can be used in landscape, turf, ornamental shrubs, trees, gardens, flowers, groundcovers and non-crop areas.

Shake or agitate prior to use.

Please refer to and follow the instructions on the Product label.

Lawn Weed Killer With Trimec Product Label

Lawn Weed Killer With Trimec Material Safety Data Sheet (MSDS)

LAWN WEED KILLER WITH TRIMEC - Qt

Southern AG's Lawn Weed Killer with Trimec is a selective, post-emergent herbicide that combines the use of 3 proven weed killers to control a wide variety of weeds on a total of 9 different turf types. This herbicide is a formula that is innovative and patented by combining -2,4D, Mecoprop, and Dicamba (all of which are proven weed killers) to provide the most effective control on broadleaf lawn weeds.

Lawn Weed Killer with Trimec is low in -2,4D than normal for maximum safety to grasses that are usually very sensitive to the -2,4D active ingredient such as grasses like St. Augustine grass, Bentgrass, and Buffalograss. This is a post-emergent herbicide and so the best results are seen when Lawn Weed Killer with Trimec is applied when broadleaf weeds are small and tender. Keep in mind that the application rate will change depending on the type of weed you are trying to eradicate. All prospected application and dilution rates are listed on the product label and so the product label must be thoroughly reviewed before any herbicide is applied. The maximum application rate to turfgrass is 0.4lbs 2,4D acid equivalent per acre per application per site. The maximum number of broadcast application per treatment site is 2 per year.

Do not use on Floratam or other improved varieties of St. Augustinegrass in Florida.

Please refer to and follow the instructions on the Product label.

Confront Herbicide Product Label

Confront Herbicide Material Safety Data Sheet (MSDS)

Confront Herbicide - 1 Gal.

Confront Specialty Herbicide should be applied when weeds are actively growing. It can be used for a variety of both warm-season and cool-season nonresidential turfgrass. Confront Specialty Herbicide is also a low odor, economical herbicide and is therefore an excellent choice for public facilities and commercial grounds such as parks, golf courses, and schools. The best time to apply Confront Specialty Herbicide is from early spring through fall. To increase spectrum of weed control Confront Specialty Herbicide can be mixed with a pre-emergence product. For convenience, it can also be mixed with fertilizers for efficiency.

*Note: Confront Specialty Herbicide is NOT labeled for residential turf.*

Please refer to and follow the instructions on the Product label for usage and application precautions.

Lontrel Turf and Ornamental Herbicide Product Label

Lontrel Turf and Ornamental Herbicide Material Safety Data Sheet (MSDS)

Lontrel Turf and Ornamental Herbicide - Quart

Lontrel Turf and Ornamental is a selective postemergent herbicide for control of broadleaf weeds in non-residential turfgrass, including turfgrass grown for seed or sod farms, and certain ornamental plantings, such as conifers, non-leguminous woody species, and ornamental grasses, in landscapes and nurseries.

This product can affect susceptible broadleaf plants directly through foliage and indirectly by root uptake from treated soil. Therefore, do not apply this product directly to, or allow spray drift to come in contact with, flowers, grapes, tomatoes, potatoes, beans, lentils, peas, alfalfa, sunflowers, soybeans, safflower, or other susceptible broadleaf crops or ornamental plants or soil where these crops will be planted the same season.

Please refer to and follow the instructions on the Product label.

Dismiss South Herbicide Product Label

Dismiss South Herbicide Material Safety Data Sheet (MSDS)

Dismiss South Herbicide - 16 oz.

Dismiss South Herbicide is a selective post-emergence herbicide which controls annual grasses, broadleaf weeds and sedges in establish turf areas including, but not limited to, residential, commercial and institutional lawns, athletic fields, commercial sod farms, golf course fairways, golf course roughs and other non-crop sites.

This product can be used on warm-season turfgrass, excluding st. augustin.

Dismiss South Herbicide produces ultra-fast visible results on sedges in just 24 to 48 hours after application.

Dismiss South Herbicide is formulated as a flowable (suspension concentrate). The mode of action of Dismiss South Herbicide involves uptake by both weed roots and shoots. Application of Dismiss South Herbicide requires soil moisture for activation. The amount of soil moisture required for activation following application depends on existing soil moisture, organic matter content and soil texture.

Temporary discoloration of some turf types may result from use of surfactants or adjuvants with Dismiss South Herbicide. High Temperatures and high relative humidity may increase the risk of temporary discoloration.

Please refer to and follow the instructions on the Product label.

QuickSilver Herbicide Product Label

QuickSilver Herbicide Material Safety Data Sheet (MSDS)

QuickSilver T & O Herbicide - 8 oz.

Quicksilver Herbicide is a selective postemergence herbicide with little or no residual activity. This product controls broadleaf weeds and silver thread moss (Bryum argenteum) in established cool-season and warm-season turfgrass (Please refer to the product label for full list and tolerant of turf grasses).

Quicksilver Herbicide rapidly penetrates into the plant cells and symptoms may be apparent on foliage of susceptible weeds in 24 hrs or less. Complete desiccation and death occurs within 7 to 14 days of application. Quicksilver Herbicide is rainfast within one hour after application.

This product is most effective when applied to actively growing winter and summer annual seedlings. It also increases the speed of kill and expands the spectrum of control of mature and perennial broadleaf weeds when applied in a tank mixture with other postemergence herbicides.

Please refer to and follow the instructions on the Product label.

Solitare Herbicide Product Label

Solitare Herbicide Material Safety Data Sheet (MSDS)

Solitare Herbicide - 1 lb.

SOLITARE HERBICIDE is a selective post- emergence herbicide which controls annual grasses, broadleaf weeds and sedges in established turf areas including, but not limited to, residential, commercial and institutional lawns, athletic fields, commercial sod farms, golf course fairways and golf course roughs.

SOLITARE HERBICIDE is formulated as a 75 WG (Water Dispersible Granule) containing 0.75 lbs of active ingredient per pound of product. SOLITARE HERBICIDE is absorbed by shoots , foliage and roots.

A post emergent application of SOLITARE HERBICIDE is improved when adequate soil moisture is present at application. Best weed control results will be obtained when no rainfall or irrigation occurs within 24 hours after application. If no rainfall or irrigation occurs within 7 days after application of SOLITARE HERBICIDE in the amount of 0.5 inches, then irrigation of at least 0.5 inches is recommended.

Temporary discoloration of some turf types may result from use of surfactants or adjuvants with SOLITARE HERBICIDE. High temperatures and high relative humidity may increase the risk of temporary discoloration.

SOLITARE HERBICIDE has been found to be compatible with most herbicides, fungicides, insecticides and growth regulators commonly used in turf and ornamental plant management.

Please refer to and follow the instructions on the Product label.

Drive XLR8 Herbicide Product Label

Drive XLR8 Herbicide Material Safety Data Sheet (MSDS)

Drive XLR8 Info Sheet

Drive XLR8 Herbicide - 1/2 Gal.

Drive XLR8 is a selective post- emergenct herbicide which controls grass and broadleaf weeds in established Turf areas including, but not limited to, residential, commercial and institutional lawns, sod farms, golf courses, parks, airports, roadsides, cemeteries, athletic fields, and school.

Drive XLR8 is an auxin agonist and is classified as a quinoline carboxylic acid. It is absorbed by foliage and roots and translocated throughout the plant. The control symptoms exhibited by broadleaf weeds include leaf and stem curl or twisting, and chlorosis. Susceptible grasses demonstrate stunting, chlorosis, and gradual reddening followed by necrosis and death.

Mix Drive XLR8 herbicide with water and a non-ionic surfactant such as Dynamic for better application and effectiveness.

For best results, Do Not water or irrigate for 24 hours after application. If rainfall does not occur in 2 to 7 days after application, irrigation of at least 0.5 inch is desirable.

Please refer to and follow the instructions on the Product label.

Revolver Herbicide Product Label

Revolver Herbicide Material Safety Data Sheet (MSDS)

Revolver Herbicide - Quart

Revolver Herbicide is a postemergent herbicide that is based on a very effective sulfonylurea chemistry to control weeds that are normally very resistant to herbicides. It is used as a foliar spray on weeds during their most vulnerable growing stages like during regrowth, season change, or injury rebounds. You can effectively control normal hard-to-control weeds like goosegrass, bentgrass, poa annua, tall fescue and many more but safely use it on season warm turfgrasses like bermudagrass, zoysiagrass, and buffalograss.

Apply Revolver Herbicide as early as 7 days prior to overseeding. Revolver Herbicide is cost-friendly and cost-effective, working even faster in warm weather. It's the ideal method of treatment to control pesky cool-season grasses that grown on warm-season turf that can actually be resistant to other competing products. It's easy to mix and easy to apply. Use Revolver Herbicide to control tough weed grasses in a variety of areas that will include sports fields, commercial lawns as well as residential lawns, roadsides, school grounds, and even cemeteries and parks.

For the best results with Revolver Herbicide, apply this product in the spring or through the fall season when average temperatures are above 70 degrees.

Please refer to and follow the instructions on the Product label.

Celsius WG Herbicide Product Label

Celsius WG Herbicide Material Safety Data Sheet (MSDS)

Celsius WG - 10 oz.

CELSIUS WG Herbicide is a postemergent foliar-applied herbicide containing three active ingredients that provide a broad spectrum of weed control.

CELSIUS WG is a herbicide for Control of Annual and Perennial Broadleaf Weeds and Grasses in Warm-Season Turf Types (St. Augustinegrass, Bermudagrass, Centipedegrass, Zoysiagrass) listed in this label in Commercial and Residential Sites, residential lawns, commercial lawns, golf courses, sports fields, parks, campsites, recreational areas, residential lawns, roadsides, school grounds, cemeteries, sod farms.

Celsius WG Herbicide is a new generation, easy to use wet-able granule herbicide. This post-emergent herbicide that is made for foliar application provides control for over 150 broadleaf and grassy weeds which means that Celsius WG has one of the broadest spectrums of control on the current market for post-emergent herbicides. You can control broadleaf weeds like American burnweed, common purslane, dollarweed and more, as well as grassy weeds like dallis grass, large crabgrass, and carpetgrass, on a variety of warm season turfgrass cultivars that have been tested on like St. Augustine, Bermudagrass, Zoysiagrass, and many more.

Celsius WG Herbicide is safe to use all year round, even during high temperatures, without you having to worry about phytotoxicity or other risks and damages. The dual features of this post-emergent herbicide with some pre-emergent control means that this new generation of herbicide allows turf to release into areas where the weeds once lived. This also means that even at high temperatures, the turf is able to reach optimal density.

Moreover, with this exceptional herbicide that controls tough weeds, application is convenient, flexible, and the residual is long. Because Celsius WG can be applied even during high temperatures, applicators can enjoy the freedom of applying this herbicide on their own time. Once applied, because the soil activity of Celsius provides a barrier of control for up to 60 days, you do not have to worry about reapplication for several months.

Celsius WG Herbicide is a post-emergent herbicide that is intended to be applied as a foliar spray at rates anywhere between 2.5 – 4.9 oz. per acre to turfgrass like St. Augustinegrass, bermudagrass, zoysiagrass, and more. However, weed types and size of infestation may vary, so product labels must thoroughly be reviewed for complete application rates depending on weed and the turfgrass that it is applied on.

St. Augustinegrass (Floratam, Palmetto, Bitter Blue, Common, Amerishade, Raleigh, Sapphire, Delmar, Captiva)
Bermudagrass (Tifway 419, Common, Tifsport, Discovery, Celebration, Sahara)
Centipedegrass (Tifblair)
Zoysiagrass (Meyer, Empire, Crown, Palisades, Cavalier, Zorro, DeAnza, Zenith)
Buffalograss (Legacy, Cody)
Crested hairgrass (Barkoel)
Russian wildrye (Bozoisky)
Sporobilis
Blue Grama (Elma)

Please refer to and follow the instructions on the Product label.

Tenacity Herbicide Product Label

Tenacity Herbicide Material Safety Data Sheet (MSDS)

Tenacity Herbicide - 8 oz.

Tenacity is a systemic preemergence and postemergence herbicide for the selective contact and residual control of weeds in turfgrasses.

When applied preemergence, weeds absorb Tenacity during emergence from the soil. Dry conditions following application may reduce the preemergence activity. If rainfall (0.15 inches) has not occurred within 10 days after a preemergence application, activate with 0.15 inches of irrigation.

When used postemergence, susceptible weeds absorb Tenacity through foliar contact and soil absorption. Foliage of treated weeds cease growth after application, then turn white (loss of chlorophyll) and death may take up to three weeks. A repeat application is required after two to three weeks for improved postemergence weed control.

A non-ionic surfactant should be added in postemergence applications.

Tenacity may cause temporary whitening of turfgrass foliage. In general, symptoms appear five to seven days after application and last for several weeks. A repeat application to the same site causes less whitening of the plant tissue.

Bentgrass, Poa annua, kikuyugrass, zoysiagrass, seashore paspalum and bermudagrass are sensitive to Tenacity applications. Avoid spraying these turf types unless control and/or injury can be tolerated. Maintain a five foot buffer between treated areas and bentgrass or Poa annua greens.

Please refer to and follow the instructions on the Product label.

SpeedZone Southern Herbicide Product Label

SpeedZone Southern Herbicide Material Safety Data Sheet (MSDS)

SpeedZone Southern Herbicide - 1 Gal.

Speedzone Southern Herbicide is a postemergent selective herbicide which controls broadleaf weeds in established cool season turf grass and most warm season turf grass.

SpeedZone Southern Herbicide is fast acting with evidence of injury within hours. The speed of action (rate of phytotoxicity) and the early injury symptoms are unique features of carfentrazone-ethyl combinations. Generally, the injury symptoms can be noticed within hours of the application and plant death can occur within 7 to 14 days.

Superior Cool Weather Performance.
Good toxicological, environmental, and ecological properties compared to the standards.

Please refer to and follow the instructions on the Product label.

SpeedZone Southern Herbicide Product Label

SpeedZone Southern Herbicide Material Safety Data Sheet (MSDS)

SpeedZone Southern Herbicide - 2.5 Gals.

Speedzone Southern Herbicide is a postemergent selective herbicide which controls broadleaf weeds in established cool season turf grass and most warm season turf grass.

SpeedZone Southern Herbicide is fast acting with evidence of injury within hours. The speed of action (rate of phytotoxicity) and the early injury symptoms are unique features of carfentrazone-ethyl combinations. Generally, the injury symptoms can be noticed within hours of the application and plant death can occur within 7 to 14 days.

Superior Cool Weather Performance.
Good toxicological, environmental, and ecological properties compared to the standards.

Please refer to and follow the instructions on the Product label.

SpeedZone Red Herbicide Product Label

SpeedZone Red Herbicide Material Safety Data Sheet (MSDS)

SpeedZone Red Herbicide - 2.5 Gals.

Speedzone Red Herbicide is a postemergent selective herbicide which controls broadleaf weeds in established cool season turf grass and most warm season turf grass.

SpeedZone Red Herbicide is fast acting with evidence of injury within hours. The speed of action (rate of phytotoxicity) and the early injury symptoms are unique features of carfentrazone-ethyl combinations. Generally, the injury symptoms can be noticed within hours of the application and plant death can occur within 7 to 14 days.

Superior Cool Weather Performance.
Good toxicological, environmental, and ecological properties compared to the standards.

Please refer to and follow the instructions on the Product label.

SpeedZone Red Herbicide Product Label

SpeedZone Red Herbicide Material Safety Data Sheet (MSDS)

SpeedZone Red Herbicide - 1 Gal.

Speedzone Red Herbicide is a postemergent selective herbicide which controls broadleaf weeds in established cool season turf grass and most warm season turf grass.

SpeedZone Red Herbicide is fast acting with evidence of injury within hours. The speed of action (rate of phytotoxicity) and the early injury symptoms are unique features of carfentrazone-ethyl combinations. Generally, the injury symptoms can be noticed within hours of the application and plant death can occur within 7 to 14 days.

Superior Cool Weather Performance.
Good toxicological, environmental, and ecological properties compared to the standards.

Please refer to and follow the instructions on the Product label.

Fusilade II Herbicide Product Label

Fusilade II Herbicide Material Safety Data Sheet (MSDS)

Fusilade II Turf and Ornamental Herbicide - Qt.

Fusilade II Turf and Ornamental Herbicide is a selective postemergence herbicide for control of annual and perennial grass weeds in ornamentals, certain turf grasses (Zoysia and tall fescue) and Noncrop areas include airports, cemeteries, electric transformer stations and sub-stations, pipeline pumping stations, around buildings, storage yards, fence lines, parkways, roadsides, rights-of-way, and similar noncropland areas. Fusilade II Turf and Ornamental Herbicide does not control broadleaf weeds or sedges (nutgrass).

Fusilade II Turf and Ornamental Herbicide may be applied directly over the top of ornamentals or as a directed spray.

Mix the Fusilade II Turf and Ornamental Herbicide with water and a non-ionic surfactant for better application and effectiveness.

Fusilade II Turf and Ornamental is a systemic herbicide which moves from the treated foliage into the shoots, roots, rhizomes, stolons, and growing points (meristematic regions) of treated grass weeds. Fusilade II Turf and Ornamental Herbicide is rainfast in one hour.

Growth of treated grass weeds stops soon after application. Symptoms include loss of vigor, yellowing and/or reddening, and eventual death to the treated grass plant. Symptoms are generally observed within 7-14 days after treatment, depending on grass weed species and environmental conditions.

Complete control occurs from 10-21 days following application.

Please refer to and follow the instructions on the Product label.

Q4 Turf Herbicide Product Label

Q4 Turf Herbicide Material Safety Data Sheet (MSDS)

Q4 Turf Herbicide Info Sheet

Q4 Turf Herbicide - Qt.

Q4 Turf Herbicide is a selective postemergence herbicide for control of many troublesome grassy and broadleaf weeds including crabgrass, foxtail and yellow nutsedge in established turfgrass such as bluegrasses, ryegrass, tall fescues, and bermudagrass when used as directed.

Q4 Turf Herbicide is a patented product that contains four active ingredients including quinclorac and sulfentrazone that broaden the spectrum of weed control.

Q4 Turf Herbicide has dramatically less discoloration on cool-season turf compared to MSMA. A definite plus for turf managers is the enhanced speed of the protox inhibitor. When you use Q4, you will see fast results usually within 24 to 48 hours.

Q4 Turf Herbicide is rain-fast in 6 hours and suitable for applications up to 90 degrees F.

Please refer to and follow the instructions on the Product label.

Q4 Turf Herbicide Product Label

Q4 Turf Herbicide Material Safety Data Sheet (MSDS)

Q4 Turf Herbicide Info Sheet

Q4 Turf Herbicide - Gal.

Q4 Turf Herbicide is a selective postemergence herbicide for control of many troublesome grassy and broadleaf weeds including crabgrass, foxtail and yellow nutsedge in established turfgrass such as bluegrasses, ryegrass, tall fescues, and bermudagrass when used as directed.

Q4 Turf Herbicide is a patented product that contains four active ingredients including quinclorac and sulfentrazone that broaden the spectrum of weed control.

Q4 Turf Herbicide has dramatically less discoloration on cool-season turf compared to MSMA. A definite plus for turf managers is the enhanced speed of the protox inhibitor. When you use Q4, you will see fast results usually within 24 to 48 hours.

Q4 Turf Herbicide is rain-fast in 6 hours and suitable for applications up to 90 degrees F.

Please refer to and follow the instructions on the Product label.

Acclaim Extra Herbicide Product Label

Acclaim Extra Herbicide Material Safety Data Sheet (MSDS)

Acclaim Extra Selective Herbicide - Pint

Acclaim Extra is a selective postemergence herbicide for control of many annual and perennial grasses in commercial and residential turf ( Kentucky bluegrass, Perennial ryegrass, Fine fescue, Tall fescue, Annual bluegrass, Zoysiagrass and Creeping Bentgrass ) and ornamentals. Acclaim Extra does not control broadleaf weeds or sedges.

Acclaim Extra Herbicide will suppress the growth of common Bermudagrass and rhizome Johnsongrass.

Acclaim Extra is absorbed through the foliage. Thorough coverage is important. Visual injury on the grass weed is evident approximately 4 to 10 days after application (dependent upon environmental conditions) but control of the grass weeds will take 12 to 21 days. Visible effects begin as a general chlorosis (yellowing) and/or reddening of the leaf surface followed by death of the weed.

Acclaim Extra Herbicide is a systemic herbicide which controls only grasses which are emerged at the time of spraying. Young, actively growing grass weeds are more easily controlled than larger grass weeds.

Avoid applications to turfgrass under stress due to lack of moisture, chemical injury or temperature extremes.

Broadleaf herbicides such as 2,4-D or MCPP may reduce the effectiveness of Acclaim Extra Herbicide. Do not apply Acclaim Extra within 21 days following a 2,4-D or MCPP application, or 5 days before a 2,4-D or MCPP application.

Please refer to and follow the instructions on the Product label.

Acclaim Extra Herbicide Product Label

Acclaim Extra Herbicide Material Safety Data Sheet (MSDS)

Acclaim Extra Selective Herbicide - Gal.

Acclaim Extra is a selective postemergence herbicide for control of many annual and perennial grasses in commercial and residential turf ( Kentucky bluegrass, Perennial ryegrass, Fine fescue, Tall fescue, Annual bluegrass, Zoysiagrass and Creeping Bentgrass ) and ornamentals. Acclaim Extra does not control broadleaf weeds or sedges.

Acclaim Extra Herbicide will suppress the growth of common Bermudagrass and rhizome Johnsongrass.

Acclaim Extra is absorbed through the foliage. Thorough coverage is important. Visual injury on the grass weed is evident approximately 4 to 10 days after application (dependent upon environmental conditions) but control of the grass weeds will take 12 to 21 days. Visible effects begin as a general chlorosis (yellowing) and/or reddening of the leaf surface followed by death of the weed.

Acclaim Extra Herbicide is a systemic herbicide which controls only grasses which are emerged at the time of spraying. Young, actively growing grass weeds are more easily controlled than larger grass weeds.

Avoid applications to turfgrass under stress due to lack of moisture, chemical injury or temperature extremes.

Broadleaf herbicides such as 2,4-D or MCPP may reduce the effectiveness of Acclaim Extra Herbicide. Do not apply Acclaim Extra within 21 days following a 2,4-D or MCPP application, or 5 days before a 2,4-D or MCPP application.

Please refer to and follow the instructions on the Product label.

Prosedge Selective Herbicide Product Label

Prosedge Selective Herbicide Material Safety Data Sheet (MSDS)

ProSedge Herbicide - 1.33 oz.

Prosedge Selective Herbicide is a selective postemergence herbicide for control of listed broadleaf weeds and nutsedge in established lawns, ornamental turfgrasses, landscaped areas, commercial and residential turfgrass, and other non-cropsites including airports, cemeteries, fallow areas, golf courses, roadsides and many more listed.

This product will not injure nearby established ornamentals, trees, and shrubs when used according to label directions.

For optimum results, do not mow turf for 2 days before or 2 days after application. This product is effective if no rainfall occurs within 3 hours, but best results are obtained with no rainfall or irrigation for at least 4 hours.

Mix the Prosedge Selective Herbicide with water and a non-ionic surfactant for better application and effectiveness.

Please refer to and follow the instructions on the Product label.

Sedgehammer Product label

Sedgehammer Material Safety Data Sheet (MSDS)

SedgeHammer Herbicide - 13.5 gram

Sedgehammer is considered one of the more "gentle to turfgrass" products and pets and people can return to the treated area once the spray dries.

Target Pest(s):	Purple nutsedge, Yellow nutsedge, Cyperus roiundus, Cyperus esculentu, Kyllinga
Manufactured By:	Gowan
Active Ingredient:	Halosulfuron-methyl - 75.0%
Size:	13.5 gram
Yield/Application:	Mix 0.9 grams in 1 gallon of water. 1 mixed gallon of solution will cover 1000 sq. ft. One full bottle (1.33 oz.) makes approx. 40 gallons of finished solution. The 0.9 gram pack only makes 1 mixed gallon of solution.
Not For Sale To:	NY

Please refer to and follow the instructions on the Product label.

Clear Pasture Product Label

Clear Pasture Material Safety Data Sheet (MSDS)

Clear Pasture - 1 Gal.

Clear Pasture Herbicide is a new product that has been released as part of the Martin's line by Control Solutions. It is a weed killing herbicide that controls a variety of target weeds that not only include perennial broadleaf weeds, but also controls woody plants and annuals in a broad spectrum of areas. These areas include grass pastures, rangeland, CRP acres, rights-of-way, non-crop areas, industrial sites, and non-irrigation ditch banks.

Apply Clear Pasture florally by diluting the concentrate with water or use it as an oil-water emulsion. If desired, use a rate of 1-2 quarts of standard agricultural surfactant per acre of land.

Use Clear Pasture to control undesired woody plants and annual and perennial broadleaf weeds around a variety of locations:
-in forests
-on permanent grass pastures, rangelans, and conservation reserve program (CRP) acres (including ditch banks and fence rows in these areas)
-on non-crop areas (industrial manufacturing and storage sites)
-on rights-of-way such as electrical power, communication, and pipe lines as well as roadsides and railroads
-on fence rows
-around farm buildings
-on perennial blugrass, perennial ryegrass, and tall fescue ornamental turf (also on sod farms, commercial turf, and golf courses)