PT 565 XLO Product Label

PT 565 XLO Material Safety Data Sheet (MSDS)

565 Plus XLO Contact Insecticide Pest Control 20oz Can

Whitmire Micro-Gen's 565 Plus XLO Contact Insecticide Pest Control is the perfect insect control solution. The insecticide contains the botanical insecticide Pyrethrin, an organic compound with potent insecticidal properties.

Why Should You Use 565 Plus XLO Contact Insecticide Pest Control?

565 Plus XLO covers an extensive range of bugs and a 20 oz. aerosol can cover approximately 1500 square feet of space.

Directions for 565 Plus XLO Contact Insecticide Pest Control 20oz Can Use

565 Plus XLO can be used for direct contact kills or space treatments. The product can be used indoors or outdoors to treat areas infested by insects.

Where to Apply 565 Plus XLO Contact Insecticide Pest Control 20oz Can

Apply 565 Plus XLO in apartments, homes, campgrounds, hotels, storage areas, schools, transports, supermarkets, commercial buildings and industrial buildings.

Indoor Applications

For space treatments, first calculate the size of the space to be treated. Turn off air conditioners and close all windows and doors and spray the enclosed area by directing the insecticide mist upwards. Spray at the rate of 1 to 3 seconds per 1000 cu. ft. of enclosed space and keep the area closed for at least 15 minutes for maximum effectiveness. Before reoccupying, ventilate the treated area.

For direct contact applications, place the injector tip at the can nozzle and spray on cracks and crevices frequented by insects. Spray at rates depending on applications. Spray additional amounts if necessary or when the infestation seems heavy. Please consult the Material Safety Data Sheet for the specifics.

Outdoor Applications

For outdoor treatments, spray only at wind speeds below 6 miles per hour. Repeat if necessary. Spray directly into mud dauber and wasp nests by holding the container 18" away.

Archer IGR Product Label

Archer IGR Material Safety Data Sheet (MSDS)

Archer IGR Brochure

Archer IGR - 1 Pint

Archer IGR is a powerful insect growth inhibitor which acts by disrupting the life cycles of pest insects. Archer IGR contains a growth inhibitor known as Pyriproxyfen. This active ingredient acts by preventing insects from developing into reproductive adults, to effectively control insect populations and infestations.

Archer IGR's formulation provides a residue that lasts for up to 7 months and does not break down in sunlight. When applied as directed, the product leaves no stains or odors.

Why Should You Use Archer IGR ?

Archer IGR effectively controls insect populations by preventing these pests from developing into reproducing adults.

Target Pest(s):

Ants, Cockroaches, Crickets, Carpet Beetle, Fleas, Ticks, Flies, Gnats, Midges, Mosquitoes, Moths, Litter Beetles

Directions for Archer IGR Use

Archer IGR can be used for crack and crevice treatments, surface treatments and perimeter treatments. Use Archer IGR as directed in the product label. Please refer to the product label and MSDS sheets for application instructions and precautions.

For best results, Archer IGR should be applied using sprayers. Before applications, spray equipment should be thoroughly cleaned and checked for leaks.

Mix Archer IGR to water as recommended in the product label. Mix 2 fluid ounces of the product to a gallon of water to control ants, cockroaches and crickets. To control fleas, ticks, carpet beetles, dermestids and flying insects, mix one fluid ounce of Archer IGR to a gallon of water.

Where to Apply Archer IGR

Archer IGR can be used in and around homes, apartments, schools, warehouses, commercial buildings, public buildings, industrial buildings, non-food handling and processing areas, transport vehicles and animal housing facilities.

Archer IGR Product Label

Archer IGR Material Safety Data Sheet (MSDS)

Archer IGR Brochure

Archer IGR - 1 Pint

Archer IGR is a powerful insect growth inhibitor which acts by disrupting the life cycles of pest insects. Archer IGR contains a growth inhibitor known as Pyriproxyfen. This active ingredient acts by preventing insects from developing into reproductive adults, to effectively control insect populations and infestations.

Archer IGR's formulation provides a residue that lasts for up to 7 months and does not break down in sunlight. When applied as directed, the product leaves no stains or odors.

Why Should You Use Archer IGR ?

Archer IGR effectively controls insect populations by preventing these pests from developing into reproducing adults.

Target Pest(s):

Ants, Cockroaches, Crickets, Carpet Beetle, Fleas, Ticks, Flies, Gnats, Midges, Mosquitoes, Moths, Litter Beetles

Directions for Archer IGR Use

Archer IGR can be used for crack and crevice treatments, surface treatments and perimeter treatments. Use Archer IGR as directed in the product label. Please refer to the product label and MSDS sheets for application instructions and precautions.

For best results, Archer IGR should be applied using sprayers. Before applications, spray equipment should be thoroughly cleaned and checked for leaks.

Mix Archer IGR to water as recommended in the product label. Mix 2 fluid ounces of the product to a gallon of water to control ants, cockroaches and crickets. To control fleas, ticks, carpet beetles, dermestids and flying insects, mix one fluid ounce of Archer IGR to a gallon of water.

Where to Apply Archer IGR

Archer IGR can be used in and around homes, apartments, schools, warehouses, commercial buildings, public buildings, industrial buildings, non-food handling and processing areas, transport vehicles and animal housing facilities.

Bedlam Product Label

Bedlam Material Safety Data Sheet (MSDS)

Bedlam Product Brochure

Bedlam Bed Bug Insecticide Spray

The Bedlam Bed Bug Spray is a potent contact insecticide against bed bugs, lice, dust mites, fleas, and ticks. Bedlam Bed Bug Spray is a direct contact insecticide that kills biting insects on contact. In addition, the product is water-based and leaves a non-staining residue to protect treated areas and objects from future infestations. Highly versatile, the product can be used for space treatments, surface treatments and crack and crevice applications.

Why Should You Use Bedlam ?

Bedlam Bed Bug Spray is a non-irritant aerosol product that is safe to use around humans and animals.

Target Pest(s):

Bed Bugs, Adult Lice and Nymphs,Dust Mites, Fleas, Ticks

Directions for Bedlam Use

Carefully read the product label before applications and treatments. Shake the container well before use. Aim the product towards the infested area. For space treatments, vacate the treated area after applications and allow the product to settle. Ventilate the treated area before reoccupying. Do NOT allow children and pets to access treated surfaces until the product residue has dried.

The product may stain some fabrics and it is recommended to conduct tests to check if the product leaves visible stains. Spray the product in inconspicuous areas such as corners, backsides and edges to check for stains after applications.

TO KILL BEDBUGS: Treat bed bug infested areas by using the product for spot treatments. Spray cracks and crevices, baseboards, floorboards, headboards, and walls where bed bugs are found and most likely to congregate. Spray the product in mattress folds, seams and tufts which harbor bed bugs.

TO KILL DUST MITES: Thoroughly vacuum rooms and surfaces where mites are spotted such as mattresses, box springs, headboards, walls, floors, carpeting, and baseboards. Spray evenly on infested surfaces. When treating mattresses and other bedding fabrics, allow the product to dry before replacing.

TO KILL TICKS AND FLEAS: Spray moderate amounts on pet areas, sleeping areas, pet bedding, carpets, rugs and other floor covering. The product is NOT recommended for use in pets.

Where to Apply Bedlam

- For indoor use and non-food areas.
- Will not stain fabrics and surfaces..
- Kills bed bugs on wood, ceramic surfaces, and carpet for up to 2 weeks.
- Sustains and reduces the bed bug life cycle by managing and preventing the hatching of bed bug eggs.

Bifen IT Product Label

Bifen IT Material Safety Data Sheet (MSDS)

BIFEN I/T - 1 Pint

Bifen I/T (Insecticide/Termiticide) is one of the most potent insecticides in the market. With 7.9% Bifenthrin, the product is highly effective in controlling a wide variety of pest insects, including various species of subterranean termites. Bifen I/T is specially formulated to control termite and insect infestations around commercial, residential and industrial structures.

Why Should You Use BIFEN I/T ?

Bifen I/T contains high concentrations of Bifenthrin to control and prevent termite and insect infestations. In addition, the product leaves a long-lasting residual effect that last for months.

Directions for BIFEN I/T Use

Applying Bifen I/T requires the use of suitable application equipment and personal protective equipment. The product is extremely toxic. Please refer to the product label before using or handling the product. Please read the product label for information on treatments, dilutions and application methods. Depending on the target pest and the method of application, Bifen I/T should be applied using the correct methods as stated in the product label. The product can be used for broadcast treatments, perimeter treatments, crack and crevice applications, sub-slab injections and residual barrier treatments. For subterranean termite control, methods may be employed such as trenching, rodding, crack and crevice injection or absorption for effective control.

Bifen I/T can also be used to control Armyworms, Cutworms, Sod Webworms, Annual Bluegrass Weevils, Billbugs, Black Turfgrass Ataenius, Leafhoppers, Mealybugs, Ants, Centipedes, Chinch Bugs, Fleas , Imported Fire Ants, Millipedes, Mole Crickets, Ticks, Pillbugs, Sowbugs and European Crane Flies. Please read the product label for directions and mixing instructions.

Where to Apply BIFEN I/T

Use Bifen I/T to treat infested areas in and around residential, commercial, public and industrial buildings. The product is for use in lawns, parks, recreational areas and athletic fields.

Conquer Product Label

Conquer Material Safety Data Sheet (MSDS)

Conquer Liquid Insecticide - 1 Pint

Widely used by PMPs due to its effectiveness, Conquer Insecticide is a general-use insecticide that targets hundreds of pest insects and provides lasting residues to prevent future infestations. The product's active ingredient is Estenvalerqate, a synthetic pyrethroid insecticide that is highly toxic to numerous pest insects even in low concentrations. Be a conqueror! Conquer pest infestations using Conquer Insecticide.

Why Should You Use Conquer Liquid Insecticide?

Conquer Insecticide covers a broad spectrum of controllable insects. The product is very economical, effective and long lasting.

Directions for Conquer Liquid Insecticide Use

Conquer Residual Insecticide concentrate may be diluted in water or oil. For general applications, mix one or two fluid ounces of Conquer EC with one gallon of water or oil. For light infestations, apply solutions containing 0.027% of the active ingredient (made by mixing one fluid ounce of Conquer CS with one gallon of water). Increase the active ingredient concentration when treating heavy infestations. Mix 2 fl. oz. of Conquer EC to a gallon of water to produce a solution containing 0.05% Estenvalergate. Apply solutions using appropriate spray equipment. Please read the product label for insect-specific control instructions.

Where to Apply Conquer Liquid Insecticide

Conquer Insecticide is for use in and around homes, apartments, schools, warehouses, office buildings, hotels, kennels, lawns, commercial buildings and industrial buildings.

Please refer to and follow the instructions on the product label.

Cy-Kick CS Insecticide Product Label

Cy-Kick CS Insecticide Material Safety Data Sheet (MSDS)

Cy-Kick CS Insecticide - 1 pint

Cy-Kick CS is a liquid insecticide with a 6.0% Cyfluthrin concentration. This fast-acting and long-lasting active ingredient effectively eliminates pests and provides a formidable barrier against future infestations indoors and outdoors. Using microencapsulation technology, Cy-Kick CS not only kills pest fast, its effects also lasts. Properly applied, Cy-Kick CS guarantees to provide your home a long-lasting pest protection for up to 3 months.

Why Should You Use Cy-Kick CS?

Cy-Kick CS is one of the best selling liquid insecticides trusted by professionals for its broad spectrum label, long residual life and effeciency.

Directions for Cy-Kick CS Use

First check the spraying equipment to be used in applying Cy-Kick CS and make sure that the equipment is clean and functioning. For your spraying equipment needs, PestMall offers a wide range of spraying equipment which can be found here.

Shake vigorously a pint of Cy-Kick CS Controlled Release Cyfluthrin Insecticide before diluting in 16 gallons of water. A ratio of 1 or 2 fluid ounces of Cy-Kick CS to a gallon of water yield 0.05% and 0.10% concentrations respectively. Concentrations may be varied depending on applications such as infestation intensity or residue control. Mix and agitate the spray solution to ensure an even mixture before spraying.

Surfaces must be prepared and thoroughly cleaned before commencing the treatment. Before treating, surfaces must be checked for exposed electrical connections and water presence. Cy-Kick CS should not be applied directly onto drifting water, which may contaminate water supplies in inhabited areas.

The product is extremely toxic and must be kept out of reach of children. Remember to wear safety apparel such as masks, gloves, goggles, boots and protective clothing before spraying.

Where to Apply Cy-Kick CS

Indoor Applications

Apply Cy-Kick CS indoors by first adding fluid ounce of Cy-Kick CS to a gallon of water for a 0.05% spray solution or increase Cy-Kick CS to water ratio as recommended. (Please refer to the Spray Dilution Chart)

Prepare and thoroughly clean indoor surfaces before treatment. Spray the diluted solution of Cy-Kick CS to infested areas, cracks, crevices and other areas frequented by pests. Treatments must be done 3 days apart if necessary.

Outdoor Applications

Apply Cy-Kick CS outdoors by first adding fluid ounce of Cy-Kick CS to a gallon of water for a 0.05% spray solution or increase Cy-Kick CS to water ratio as recommended. (Please refer to the Spray Dilution Chart)

Prepare and thoroughly clean outdoor surfaces before treating them. Spray the diluted solution of Cy-Kick CS to infested areas, cracks, crevices and other areas frequented by pests. Treatments must be done 3 days apart if necessary. Treat perimeter soil and building foundations to prevent future infestations.

CyhaloCap CS Product Label

CyhaloCap CS Material Safety Data Sheet (MSDS)

CyhaloCap CS Insecticide - 1 pint

High-performance microencapsulation technology for residual control. CyhaloCap CS (Capsule Suspension) Insecticide provides broad-spectrum, residual control of structural pests for PMPs who prefer lambda-cyhalothrin.

For Use in and Around: Indoor and outdoor

Product Description

CyhaloCap CS is a dilutable spray containing BASF's proprietary SmartCap microencapsulation technology and featuring lambda-cyhalothrin, a proven active ingredient with broad spectrum activity and effective residual control of structural pests.

Cynoff EC Product Label

Cynoff EC Material Safety Data Sheet (MSDS)

CYNOFF EC - 1 Quart

Cynoff EC uses a knock down method which last longer then organophosphates to control pest. Once the pest comes in contact with Cynoff EC, it is killed. Cynoff EC is an odorless insecticide concentrate and leaves no residue. Cynoff EC, along with Cynoff WP and Demon WP, belong in the synthetic pyrethroid family, carrying the same active ingredient as Cyper WP and Demon WP. You only need 1/2 to 1 ounce of Cynoff EC per gallon of water, one quart yielding 32-64 gallons.

Fortified by Cypermethrin, Cynoff EC Insecticide delivers quick and powerful cleanout control of cockroaches and other pests. Upon contact or ingestion, the active ingredient instantly paralyzes and kills insects. Commonly used for residual control or direct kill applications, Cynoff can also be used for barrier treatments with exceptional results.

Why Should You Use CYNOFF EC ?

Cynoff EC provides immediate solutions to several infestations. It is a fast-acting contact insecticide that is odorless and long lasting.

* Outdoor use only.

**Not for Indoor use in California

Directions for CYNOFF EC Use

Cynoff EC is a concentrate that must be diluted in water for spray or brushing applications. Fill sprayer tanks half-full before adding the concentrate. Add the remaining volume of water and agitate the tank to ensure a uniform mixture. Depending on the target pest/s, solutions must have 0.1% to 0.2% active ingredient content. This can be made by mixing 1/2 fl. oz. of Cynoff with 1 gallon of water to produce solutions with 0.1% A.I. concentration. Doubling the amount of the concentrate yields solutions with 0.2% A.I. content.

Apply the product as a coarse, low pressure spray to infested areas and potential insect-harboring sites such as basements, attics, behind and under appliances, storage areas, cabinets, shelves, baseboards, under sinks and along plumbing. Pay particular attention to cracks, crevices and voids.

Using hand or power sprayers, apply the product by brush or residual spray to building surfaces, porches, window screens, patios, lawns and other grass areas to control outdoor insects.

For barrier treatments, create a band measuring 6 to 10 feet around structures to protect them from infestations. Apply the product as a coarse spray, at the rate of 1 gallon per 400 square feet. Also treat building foundations and other potential entry points to a height of 3 to 5 feet.

To control cluster flies, mix 1 fluid ounce of Cynoff to 10 fluid ounces of mineral oil. Apply to 1,000 square feet of wall area using fogging equipment.

Where to Apply CYNOFF EC

Cynoff EC is for residual pest control in and on buildings and structures including: industrial buildings, houses, apartment buildings, laboratories, buses, greenhouses, and the nonfood/feed areas of stores, warehouses, vessels, railcars, trucks, trailers, aircraft (Do not use in aircraft cabins), schools, nursing homes, hospitals, restaurants, hotels, and food manufacturing, processing, and servicing establishments.

Cynoff EC Product Label

Cynoff EC Material Safety Data Sheet (MSDS)

CYNOFF EC - 1 Quart

Cynoff EC uses a knock down method which last longer then organophosphates to control pest. Once the pest comes in contact with Cynoff EC, it is killed. Cynoff EC is an odorless insecticide concentrate and leaves no residue. Cynoff EC, along with Cynoff WP and Demon WP, belong in the synthetic pyrethroid family, carrying the same active ingredient as Cyper WP and Demon WP. You only need 1/2 to 1 ounce of Cynoff EC per gallon of water, one quart yielding 32-64 gallons.

Fortified by Cypermethrin, Cynoff EC Insecticide delivers quick and powerful cleanout control of cockroaches and other pests. Upon contact or ingestion, the active ingredient instantly paralyzes and kills insects. Commonly used for residual control or direct kill applications, Cynoff can also be used for barrier treatments with exceptional results.

Why Should You Use CYNOFF EC ?

Cynoff EC provides immediate solutions to several infestations. It is a fast-acting contact insecticide that is odorless and long lasting.

* Outdoor use only.

**Not for Indoor use in California

Directions for CYNOFF EC Use

Cynoff EC is a concentrate that must be diluted in water for spray or brushing applications. Fill sprayer tanks half-full before adding the concentrate. Add the remaining volume of water and agitate the tank to ensure a uniform mixture. Depending on the target pest/s, solutions must have 0.1% to 0.2% active ingredient content. This can be made by mixing 1/2 fl. oz. of Cynoff with 1 gallon of water to produce solutions with 0.1% A.I. concentration. Doubling the amount of the concentrate yields solutions with 0.2% A.I. content.

Apply the product as a coarse, low pressure spray to infested areas and potential insect-harboring sites such as basements, attics, behind and under appliances, storage areas, cabinets, shelves, baseboards, under sinks and along plumbing. Pay particular attention to cracks, crevices and voids.

Using hand or power sprayers, apply the product by brush or residual spray to building surfaces, porches, window screens, patios, lawns and other grass areas to control outdoor insects.

For barrier treatments, create a band measuring 6 to 10 feet around structures to protect them from infestations. Apply the product as a coarse spray, at the rate of 1 gallon per 400 square feet. Also treat building foundations and other potential entry points to a height of 3 to 5 feet.

To control cluster flies, mix 1 fluid ounce of Cynoff to 10 fluid ounces of mineral oil. Apply to 1,000 square feet of wall area using fogging equipment.

Where to Apply CYNOFF EC

Cynoff EC is for residual pest control in and on buildings and structures including: industrial buildings, houses, apartment buildings, laboratories, buses, greenhouses, and the nonfood/feed areas of stores, warehouses, vessels, railcars, trucks, trailers, aircraft (Do not use in aircraft cabins), schools, nursing homes, hospitals, restaurants, hotels, and food manufacturing, processing, and servicing establishments.

Cynoff WP Product Label

Cynoff WP Material Safety Data Sheet (MSDS)

Cynoff WP - 1 lb.

The power of Cypermethrin is now available in powder form with FMC's Cynoff WP. Excellent for broadcast, perimeter, and crack and crevice treatments, Cynoff delivers superior residual and contact kill to common pests. Cynoff WP has an active ingredient content of 40%, nearly doubling that of Cynoff EC. WP is a cost-effective insecticide that can yield up to 48 gallons of solution at the cost less than its competitors.

Why Should You Use CYNOFF WP?

Cynoff cost less but performs better than other insecticide brands.

Directions for CYNOFF WP Use

Cynoff WP must be diluted in water for spray or brushing applications. The product comes with a plastic scoop with 0.33 oz. capacity. Use a full scoop of Cynoff WP per gallon of water to yield a solution having 0.1% of the active ingredient. Doubling the amount of the concentrate yields solutions with 0.2% active ingredient content. Depending on the target pest/s, solutions must have 0.1% to 0.2% active ingredient content.

Apply the product as a coarse, low pressure spray to infested areas and potential insect-harboring sites such as basements, attics, behind and under appliances, storage areas, cabinets, shelves, baseboards, under sinks and along plumbing. Pay particular attention to cracks, crevices and voids.

Using hand or power sprayers, apply the product by brush or residual spray to building surfaces, porches, window screens, patios, lawns and other grass areas to control outdoor insects.

For barrier treatments, create a band measuring 6 to 10 feet around structures to protect them from infestations. Apply the product as a coarse spray, at the rate of 1 gallon per 400 square feet. Also treat building foundations and other potential entry points to a height of 3 to 5 feet.

Where to Apply CYNOFF WP

Cynoff WP is for residual pest control in and on buildings and structures including: industrial buildings, houses, apartment buildings, laboratories, buses, greenhouses, and the nonfood/feed areas of stores, warehouses, vessels, railcars, trucks, trailers, aircraft (Do not use in aircraft cabins), schools, nursing homes, hospitals, restaurants, hotels, and food manufacturing, processing, and servicing establishments.

Cynoff WP Product Label

Cynoff WP Material Safety Data Sheet (MSDS)

Cynoff WP - 1 lb.

The power of Cypermethrin is now available in powder form with FMC's Cynoff WP. Excellent for broadcast, perimeter, and crack and crevice treatments, Cynoff delivers superior residual and contact kill to common pests. Cynoff WP has an active ingredient content of 40%, nearly doubling that of Cynoff EC. WP is a cost-effective insecticide that can yield up to 48 gallons of solution at the cost less than its competitors.

Why Should You Use CYNOFF WP?

Cynoff cost less but performs better than other insecticide brands.

Directions for CYNOFF WP Use

Cynoff WP must be diluted in water for spray or brushing applications. The product comes with a plastic scoop with 0.33 oz. capacity. Use a full scoop of Cynoff WP per gallon of water to yield a solution having 0.1% of the active ingredient. Doubling the amount of the concentrate yields solutions with 0.2% active ingredient content. Depending on the target pest/s, solutions must have 0.1% to 0.2% active ingredient content.

Apply the product as a coarse, low pressure spray to infested areas and potential insect-harboring sites such as basements, attics, behind and under appliances, storage areas, cabinets, shelves, baseboards, under sinks and along plumbing. Pay particular attention to cracks, crevices and voids.

Using hand or power sprayers, apply the product by brush or residual spray to building surfaces, porches, window screens, patios, lawns and other grass areas to control outdoor insects.

For barrier treatments, create a band measuring 6 to 10 feet around structures to protect them from infestations. Apply the product as a coarse spray, at the rate of 1 gallon per 400 square feet. Also treat building foundations and other potential entry points to a height of 3 to 5 feet.

Where to Apply CYNOFF WP

Cynoff WP is for residual pest control in and on buildings and structures including: industrial buildings, houses, apartment buildings, laboratories, buses, greenhouses, and the nonfood/feed areas of stores, warehouses, vessels, railcars, trucks, trailers, aircraft (Do not use in aircraft cabins), schools, nursing homes, hospitals, restaurants, hotels, and food manufacturing, processing, and servicing establishments.

Delta Dust Product Labe

Delta Dust Material Safety Data Sheet (MSDS)

How to Apply Dust Insecticide

Delta Dust - 1 lb.

Bayer's Delta Dust is a waterproof insecticide in powder form. Unlike other dusts and residuals, Delta Dust stays dry and active even when applied in areas with high humidity and moisture. Pests prefer damp places such as under sinks and along plumbing and Delta Dust is the perfect control product to use. Fast acting and long lasting, this contact insecticide kills pests upon contact remains active for up to 8 months! Low active ingredient concentration makes the product safe for use even in food handling areas.

Please read the product label for application instructions and the recommended application rates. Pestmall offers Centrobulb Dusters and Bellow Dusters needed to apply Delta Dust Insecticides.

Why Should You Use Delta Dust?

Unlike other dust insecticides, Delta Dust stays dry and effective and remains so for eight long months.

Directions for Delta Dust Use

Delta Dust should be applied uniformly over treatment areas using proper application equipment such as hand dusters, power dusters or paint brushes. Pay special attention to cracks and crevices, voids, under appliances, ducts, plumbing, attics, crawlspaces, baseboards and other sites frequented by pests.

Control listed pests by treating infested areas with Delta Dust at the rate of 2 to 3 grams per 1,000 square feet. Repeat treatments if necessary.

FOR CONTROL OF ANTS, BLACK CARPET BEETLES, BOXELDER BUGS, CENTIPEDES, COCKROACHES, CRICKETS, FLEAS, FIREBRATS, GROUND BEETLES, MILLIPEDES, SCORPIONS, SPIDERS SOWBUGS,SILVERFISH AND WEBBING CLOTHES MOTHS: Thoroughly apply the product to areas where these pests are known to frequent, breed, hide and congregate. Apply the product over ant trails and entry points such as windows and doors. Treat pet sleeping quarters, moist areas under sinks, under and behind refrigerators, inside cabinets and other known infestation sites of the above listed pests.

TERMITES, CARPENTER ANTS AND CARPENTER BEES: Apply the product through cracks and voids on wooden components damaged by wood-boring insects. Treat surfaces vulnerable to infestations such as foundations and walls. Holes may be drilled through damaged components in order to treat inaccessible tunnels and galleries inside. Use this product as a supplement to other treatments.

WASPS AND BEES: Wear protective clothing to avoid stings. It is recommended to treat nests late in the day where wasps/bees are generally less active. Uniformly apply Delta Dust over wasp/bee nests, entrances and their immediate surroundings. Drilling may be necessary to apply the product inside nests.

BEDBUGS: Delta Dust can be used together with other insecticides to treat bed bug infestations. Apply dust to folds and tufts of mattresses, headboards, footboards, springs, bed frames, cracks and spaces between components, furniture, upholsteries and other infested areas. Let the product settle for 4 to 6 hours and thoroughly vacuum treated areas afterwards.

STORED PRODUCT PESTS SUCH AS CADELLES, CHEESE MITES, CIGARETTE BEETLES, CONFUSED FLOUR BEETLES, DARK MEAL WORMS, DRUGSTORE BEETLES, GRAIN MITES, GRANARY WEEVILS, LESSER GRAIN BORERS, MERCHANT GRAIN BEETLES, RED FLOUR BEETLES, RICE WEEVILS, RUSTY GRAIN BEETLES, SAWTOOTHED GRAIN BEETLES, SPIDER BEETLES, TOBACCO MOTHS AND YELLOWMEAL MOTHS: Thoroughly clean storage areas from dirt, debris, dust and dispose of contaminated/infested products. Apply dust to floors, walls and surfaces in storage and handling areas. Treat cracks and crevices, shelves and other sites that may provide harborage to insects.

Where to Apply Delta Dust

Aircrafts, Animal Quarters/Kennels, Apartments, Buses, Food/Feed Manufacturing, Processing and Service Establishments, Greenhouses, Grocery Stores and Supermarkets, Hospitals, Hotels, Motels, Houses, Industrial Buildings and Installations, Laboratories, Mausoleums, Mobile Homes and Recreational Vehicles, Nursing Homes/Day Care Centers, Rail Cars, Restaurants, Schools, Sewers, Stores and Institutions, Telecommunication Conduits, Theaters, Trucks and Trailers, Utility Vaults and Conduits, Vessels, Warehouses and Zoos.

Delta Dust Product Labe

Delta Dust Material Safety Data Sheet (MSDS)

How to Apply Dust Insecticide

Delta Dust - 1 lb.

Bayer's Delta Dust is a waterproof insecticide in powder form. Unlike other dusts and residuals, Delta Dust stays dry and active even when applied in areas with high humidity and moisture. Pests prefer damp places such as under sinks and along plumbing and Delta Dust is the perfect control product to use. Fast acting and long lasting, this contact insecticide kills pests upon contact remains active for up to 8 months! Low active ingredient concentration makes the product safe for use even in food handling areas.

Please read the product label for application instructions and the recommended application rates. Pestmall offers Centrobulb Dusters and Bellow Dusters needed to apply Delta Dust Insecticides.

Why Should You Use Delta Dust?

Unlike other dust insecticides, Delta Dust stays dry and effective and remains so for eight long months.

Directions for Delta Dust Use

Delta Dust should be applied uniformly over treatment areas using proper application equipment such as hand dusters, power dusters or paint brushes. Pay special attention to cracks and crevices, voids, under appliances, ducts, plumbing, attics, crawlspaces, baseboards and other sites frequented by pests.

Control listed pests by treating infested areas with Delta Dust at the rate of 2 to 3 grams per 1,000 square feet. Repeat treatments if necessary.

FOR CONTROL OF ANTS, BLACK CARPET BEETLES, BOXELDER BUGS, CENTIPEDES, COCKROACHES, CRICKETS, FLEAS, FIREBRATS, GROUND BEETLES, MILLIPEDES, SCORPIONS, SPIDERS SOWBUGS,SILVERFISH AND WEBBING CLOTHES MOTHS: Thoroughly apply the product to areas where these pests are known to frequent, breed, hide and congregate. Apply the product over ant trails and entry points such as windows and doors. Treat pet sleeping quarters, moist areas under sinks, under and behind refrigerators, inside cabinets and other known infestation sites of the above listed pests.

TERMITES, CARPENTER ANTS AND CARPENTER BEES: Apply the product through cracks and voids on wooden components damaged by wood-boring insects. Treat surfaces vulnerable to infestations such as foundations and walls. Holes may be drilled through damaged components in order to treat inaccessible tunnels and galleries inside. Use this product as a supplement to other treatments.

WASPS AND BEES: Wear protective clothing to avoid stings. It is recommended to treat nests late in the day where wasps/bees are generally less active. Uniformly apply Delta Dust over wasp/bee nests, entrances and their immediate surroundings. Drilling may be necessary to apply the product inside nests.

BEDBUGS: Delta Dust can be used together with other insecticides to treat bed bug infestations. Apply dust to folds and tufts of mattresses, headboards, footboards, springs, bed frames, cracks and spaces between components, furniture, upholsteries and other infested areas. Let the product settle for 4 to 6 hours and thoroughly vacuum treated areas afterwards.

STORED PRODUCT PESTS SUCH AS CADELLES, CHEESE MITES, CIGARETTE BEETLES, CONFUSED FLOUR BEETLES, DARK MEAL WORMS, DRUGSTORE BEETLES, GRAIN MITES, GRANARY WEEVILS, LESSER GRAIN BORERS, MERCHANT GRAIN BEETLES, RED FLOUR BEETLES, RICE WEEVILS, RUSTY GRAIN BEETLES, SAWTOOTHED GRAIN BEETLES, SPIDER BEETLES, TOBACCO MOTHS AND YELLOWMEAL MOTHS: Thoroughly clean storage areas from dirt, debris, dust and dispose of contaminated/infested products. Apply dust to floors, walls and surfaces in storage and handling areas. Treat cracks and crevices, shelves and other sites that may provide harborage to insects.

Where to Apply Delta Dust

Aircrafts, Animal Quarters/Kennels, Apartments, Buses, Food/Feed Manufacturing, Processing and Service Establishments, Greenhouses, Grocery Stores and Supermarkets, Hospitals, Hotels, Motels, Houses, Industrial Buildings and Installations, Laboratories, Mausoleums, Mobile Homes and Recreational Vehicles, Nursing Homes/Day Care Centers, Rail Cars, Restaurants, Schools, Sewers, Stores and Institutions, Telecommunication Conduits, Theaters, Trucks and Trailers, Utility Vaults and Conduits, Vessels, Warehouses and Zoos.

Deltagard G Product Label

Deltagard G Material Safety Data Sheet (MSDS)

DeltaGard G Granule - 20 lbs.

DeltaGard G Insecticide Granule is specially formulated for outdoor use to control common lawn pests. Broad spectrum, easy to apply and outright effective, DeltaGard delivers complete control over outdoor infestations. Highly soluble granules dissolve easily in water and seep through the soil, eliminating burrowing pests.

Why Should You Use DeltaGard G Granule ?

DeltaGard is a broad label insecticide that targets over 40 lawn pests and is totally safe for use in perimeter soil and turf areas.

Directions for DeltaGard G Granule Use

Apply the product evenly to treatment areas using granular spreaders or similar equipment. Apply at the rate of 2 to 3 pounds per 1, 000 square feet. For control subsurface pests, use the higher application rate. Irrigate treated areas immediately after treatments to dissolve the granules and improve efficacy.

For perimeter treatments, treat a band of soil measuring 5 to 10 feet in width around and adjacent to structures. Treat at a rate of 1 to 1 1/2 pounds every 500 square feet.

Treat ant, digger wasp and imported fire ant nests/mounds with 1 to 2 teaspoons of granules in and around each mound. Irrigate the mound/nest and its immediate surroundings to dissolve the granules.

Where to Apply DeltaGard G Granule

DeltaGard is for outdoor use only to treat infestations in laws, landscapes, turfgrass and around perimeters of residential, commercial and recreational areas.

Demand CS Product Label

Demand CS Material Safety Data Sheet (MSDS)

Demand CS Brochure

Demand CS - 8 oz

Demand CS is a highly active insecticide featuring Syngenta's iCAP microencapsulation technology. By encapsulating Lambda-Cyhalothrin, Demand CS produces residuals that are waterproof, photo-stable, and long lasting. Controlled release of the active ingredient greatly increases residual life at the same time reduce the residue's odors and stains. Versatile and economical, Demand mixes well with other registered pesticides and can be diluted and applied in very low concentrations.

Why Should You Use DEMAND CS ?

Demand CS uses microencapsulation techniques to extend the life end efficiency of residuals.

Directions for DEMAND CS Use

Use Demand CS for surface, crack and crevice or spot treatments. The product comes as a concentrate that must be diluted with water and applied using application equipment such as hand/power sprayers.

Shake well before using. Mix Demand CS with water to produce solutions. Finished solutions can be converted to foam using foaming agents to treat structural voids and nests. Solutions may have 0.015% to 0.06% active ingredient content, depending on the target pest/s and the severity of their infestations. Other registered insecticides may be added to yield solutions with multiple capabilities. Please read the product label for dilution tables and application rates.

Apply as a coarse, low pressure spray to indoor or outdoor sites and surfaces. Spray to areas where insects are seen congregating, hiding, breeding and other potential harborage areas. Pay special attention to cracks, crevices and voids in structures. Treat these areas with liquid or foam using appropriate equipment and methods.

Demand CS can also be used to create perimeter barriers, treat infestations in ornamental plants and turf and for subsurface treatments to control mole crickets and ants. Refer to the product label for specific instructions on how to control target pests.

Where to Apply DEMAND CS

Demand CS is for use in, on and around residential, commercial, institutional, public, agricultural and industrial buildings/structures.

Demand CS Product Label

Demand CS Material Safety Data Sheet (MSDS)

Demand CS Brochure

Demand CS - 8 oz

Demand CS is a highly active insecticide featuring Syngenta's iCAP microencapsulation technology. By encapsulating Lambda-Cyhalothrin, Demand CS produces residuals that are waterproof, photo-stable, and long lasting. Controlled release of the active ingredient greatly increases residual life at the same time reduce the residue's odors and stains. Versatile and economical, Demand mixes well with other registered pesticides and can be diluted and applied in very low concentrations.

Why Should You Use DEMAND CS ?

Demand CS uses microencapsulation techniques to extend the life end efficiency of residuals.

Directions for DEMAND CS Use

Use Demand CS for surface, crack and crevice or spot treatments. The product comes as a concentrate that must be diluted with water and applied using application equipment such as hand/power sprayers.

Shake well before using. Mix Demand CS with water to produce solutions. Finished solutions can be converted to foam using foaming agents to treat structural voids and nests. Solutions may have 0.015% to 0.06% active ingredient content, depending on the target pest/s and the severity of their infestations. Other registered insecticides may be added to yield solutions with multiple capabilities. Please read the product label for dilution tables and application rates.

Apply as a coarse, low pressure spray to indoor or outdoor sites and surfaces. Spray to areas where insects are seen congregating, hiding, breeding and other potential harborage areas. Pay special attention to cracks, crevices and voids in structures. Treat these areas with liquid or foam using appropriate equipment and methods.

Demand CS can also be used to create perimeter barriers, treat infestations in ornamental plants and turf and for subsurface treatments to control mole crickets and ants. Refer to the product label for specific instructions on how to control target pests.

Where to Apply DEMAND CS

Demand CS is for use in, on and around residential, commercial, institutional, public, agricultural and industrial buildings/structures.

Demand G Product Label

Demand G Material Safety Data Sheet (MSDS)

Demand G Granules - 25 lbs.

With an innovative formulation process, the granular perimeter treatment of Demand G with Active Release technology provides powerful and efficient protection against nearly 30 species of pests. Demand G is exclusively engineered with an enhanced solvent for the optimal release of its active ingredient, lambda-cyhalothrin, from the granule. Demand G is specially formulated of optimal release of insecticide and ideal for applications in damp and windy conditions. Demand G is labeled for lawn, landscape and perimeter use. Demand G is also superior in efficiency and provides more treatments per package than traditional granules. Demand G is approved for residential, commercial, and institutional applications.

Useful Tips You May Need to Know

We recommend applying Demand G Granules with handle spreader for easier and more effective application.

Advantages of Demand G Granules

Specially formulated of optimal release of insecticide

Ideal for applications in damp and windy conditions

Labeled for lawn, landscape and perimeter use

Superior efficiency provides more treatments per package than traditional granules

Approved for residential, commercial and institutional applications

For control of ants, beetles, crickets, earwigs, firebrats, millipedes, mites, silverfish and sowbugs as commonly found around or near foundation of structures as well as in yards with Demand G:

Some of these pests may enter houses. Applying a continual band of insecticide around a building foundation can greatly reduce the potential for entry by crawling pests. For optimal control, remove debris and leaf litter from next to the foundation, cut back vegetation and branches that touch the foundation, and move or rake back rocks, deep mulch, or other potential pest harborage next to the foundation prior to application. Apply a 3 to 5 foot band of granules next to the structure foundation. Apply at the rate of 2 to 3 lbs. per 1000 square feet. Distribute granules uniformly. For optimal control, water lightly to dissolve granules.

For control of ants, armyworms, centipedes, crickets, cutworms, earwigs, grasshoppers, green June beetles, Japanese beetles (adult), leafhoppers, millipedes, mites, pillbugs, sod webworms, spider mites, spittlebugs and springtails with Demand G:

Apply at the rate of 2 to 3 lbs. per 1000 square feet with a fertilizer spreader when grass is dry. For best results, water lawn lightly to dissolve granules.

For control or suppression of billbugs, chinch bugs, dung beetles, green June beetle grubs, Hyperodes weevils, Japanese beetle grubs and mole crickets, immediately water grass thoroughly after application with Demand G:

For billbug control, apply when activity is first observed or when chewed or brown grass indicates damage from these insects. For grub suppression, except dung beetle, treat any time between late July and early October. For dung beetle grub suppression, apply in spring or early summer when damage is first noticed. For best results, water grass thoroughly with 1/4 to 1/2 inch of water as soon as possible following application. Treat again in late summer or early fall if a second generation occurs. For chinch bugs, use higher rates during summer when both nymphs and adults may be present. For mole crickets, make applications for adults during early spring when grass areas may be subject to continuous invasion. For best results, apply as late in the day as possible and water in with up to 0.5 inches of water as soon as possible following treatment. When the soil is not moist, irrigation before application will bring mole crickets closer to the surface to enhance contact with the granule. Applications at the time of peak egg hatch will increase control of early nymphal stages that are more susceptible to insecticides. As nymphs mature, higher rates may be necessary.

Spot Treatment for Ants with Demand G:

For general ant control, apply 11/2 teaspoons over and around each ant hill. Lightly water to dissolve granules. Apply water gently to avoid disturbing ants, first breaking any necessary soil crust to ensure water penetrates the nest. Use of high pressure watering equipment may disturb the ants and cause migration-reducing product effectiveness. NOTE: For best results, apply in cool weather, 60 to 80 F, in early morning, or late evening hours. Treat near mounds as they appear. Difficult or extensive ant infestations will benefit from a combination of broadcast treatments and spot applications. If soil is not moist, irrigate before application to bring ants closer to the surface to enhance control with Demand G Insecticide granules. Do not apply this product to edible growing crops or stored raw agricultural commodities used for food or feed. Do not allow applications to contact water inhabited by fish, such as in ornamental fish ponds that are located around structures being treated. Do not apply this product by aerial application. Use of this pesticide adjacent to water may affect aquatic organisms. To protect these organisms, do not apply this pesticide within 25 ft. of lakes, reservoirs, rivers, permanent streams, marshes or natural ponds, estuaries, and commercial fish farm ponds. In the state of New York, do not apply within 100 ft. of coastal marshes or streams that drain into coastal marshes. Observe all restrictions and precautions which appear on the labels of these products. Do not apply more than 0.36 lbs. of the a.i. (800 pounds of Demand G Insecticide) per year. Good coverage is necessary to provide the most effective level of control. Consult your state university or local Cooperative Extension Service office for specific pest control application timing in your area. Application to turf should be started prior to the establishment of high insect pest populations and significant turf damage. Make reapplications as necessary to keep pest populations under control, using higher rates as pest pressure increases.

Demand G Product Label

Demand G Material Safety Data Sheet (MSDS)

Demand G Granules - 25 lbs.

With an innovative formulation process, the granular perimeter treatment of Demand G with Active Release technology provides powerful and efficient protection against nearly 30 species of pests. Demand G is exclusively engineered with an enhanced solvent for the optimal release of its active ingredient, lambda-cyhalothrin, from the granule. Demand G is specially formulated of optimal release of insecticide and ideal for applications in damp and windy conditions. Demand G is labeled for lawn, landscape and perimeter use. Demand G is also superior in efficiency and provides more treatments per package than traditional granules. Demand G is approved for residential, commercial, and institutional applications.

Useful Tips You May Need to Know

We recommend applying Demand G Granules with handle spreader for easier and more effective application.

Advantages of Demand G Granules

Specially formulated of optimal release of insecticide

Ideal for applications in damp and windy conditions

Labeled for lawn, landscape and perimeter use

Superior efficiency provides more treatments per package than traditional granules

Approved for residential, commercial and institutional applications

For control of ants, beetles, crickets, earwigs, firebrats, millipedes, mites, silverfish and sowbugs as commonly found around or near foundation of structures as well as in yards with Demand G:

Some of these pests may enter houses. Applying a continual band of insecticide around a building foundation can greatly reduce the potential for entry by crawling pests. For optimal control, remove debris and leaf litter from next to the foundation, cut back vegetation and branches that touch the foundation, and move or rake back rocks, deep mulch, or other potential pest harborage next to the foundation prior to application. Apply a 3 to 5 foot band of granules next to the structure foundation. Apply at the rate of 2 to 3 lbs. per 1000 square feet. Distribute granules uniformly. For optimal control, water lightly to dissolve granules.

For control of ants, armyworms, centipedes, crickets, cutworms, earwigs, grasshoppers, green June beetles, Japanese beetles (adult), leafhoppers, millipedes, mites, pillbugs, sod webworms, spider mites, spittlebugs and springtails with Demand G:

Apply at the rate of 2 to 3 lbs. per 1000 square feet with a fertilizer spreader when grass is dry. For best results, water lawn lightly to dissolve granules.

For control or suppression of billbugs, chinch bugs, dung beetles, green June beetle grubs, Hyperodes weevils, Japanese beetle grubs and mole crickets, immediately water grass thoroughly after application with Demand G:

For billbug control, apply when activity is first observed or when chewed or brown grass indicates damage from these insects. For grub suppression, except dung beetle, treat any time between late July and early October. For dung beetle grub suppression, apply in spring or early summer when damage is first noticed. For best results, water grass thoroughly with 1/4 to 1/2 inch of water as soon as possible following application. Treat again in late summer or early fall if a second generation occurs. For chinch bugs, use higher rates during summer when both nymphs and adults may be present. For mole crickets, make applications for adults during early spring when grass areas may be subject to continuous invasion. For best results, apply as late in the day as possible and water in with up to 0.5 inches of water as soon as possible following treatment. When the soil is not moist, irrigation before application will bring mole crickets closer to the surface to enhance contact with the granule. Applications at the time of peak egg hatch will increase control of early nymphal stages that are more susceptible to insecticides. As nymphs mature, higher rates may be necessary.

Spot Treatment for Ants with Demand G:

For general ant control, apply 11/2 teaspoons over and around each ant hill. Lightly water to dissolve granules. Apply water gently to avoid disturbing ants, first breaking any necessary soil crust to ensure water penetrates the nest. Use of high pressure watering equipment may disturb the ants and cause migration-reducing product effectiveness. NOTE: For best results, apply in cool weather, 60 to 80 F, in early morning, or late evening hours. Treat near mounds as they appear. Difficult or extensive ant infestations will benefit from a combination of broadcast treatments and spot applications. If soil is not moist, irrigate before application to bring ants closer to the surface to enhance control with Demand G Insecticide granules. Do not apply this product to edible growing crops or stored raw agricultural commodities used for food or feed. Do not allow applications to contact water inhabited by fish, such as in ornamental fish ponds that are located around structures being treated. Do not apply this product by aerial application. Use of this pesticide adjacent to water may affect aquatic organisms. To protect these organisms, do not apply this pesticide within 25 ft. of lakes, reservoirs, rivers, permanent streams, marshes or natural ponds, estuaries, and commercial fish farm ponds. In the state of New York, do not apply within 100 ft. of coastal marshes or streams that drain into coastal marshes. Observe all restrictions and precautions which appear on the labels of these products. Do not apply more than 0.36 lbs. of the a.i. (800 pounds of Demand G Insecticide) per year. Good coverage is necessary to provide the most effective level of control. Consult your state university or local Cooperative Extension Service office for specific pest control application timing in your area. Application to turf should be started prior to the establishment of high insect pest populations and significant turf damage. Make reapplications as necessary to keep pest populations under control, using higher rates as pest pressure increases.

CB D-Force HPX Product Label

CB D-Force HPX Material Safety Data Sheet (MSDS)

CB D-Force HPX - 14 oz.

The CB D-Force HPX is one of the best-selling aerosol insecticides in the market. D-Force HPX provides fast killing action and residual control over 50 species of pest insects. Properly applied, the product residues remain potent for up to 8 weeks, making the product an ideal supplement to several types of bait. Both the D-Force HPX and D-Foam contain low concentrations of the synthetic insecticide Deltamethrin. Low active ingredient and volatile organic compound (VOC) content makes the product ideal for use in residential and food-handling areas of buildings.

Why Should You Use CB D-Force HPX ?

CB D-Force has a broad spectrum label, long residual half-life and a powerful formula to effectively control invasive pests.

Directions for CB D-Force HPX Use

Shake well before each use. Hold the container upright and hold the can 12 to 15 inches away from treatment areas. Use the supplied actuator for crack and crevice treatments. Direct the nozzle towards the treatment area and apply the product as recommended in the product label.

Spray sufficient amounts of CB D-Force directly over insects or to sites where pests are seen. Pay particular attention to areas harboring insects such cracks and crevices, under appliances, sinks and other potential hiding and breeding spots. For bedbugs, remove beddings and apply the product in tufts, folds and the bed frame. Wash beddings before reusing.

CB D-Foam is suitable for surface applications, crack and crevice applications, spot treatments and wall void applications. To control subterranean termites in above-ground areas of structures, first locate galleries, voids and tunnels in wooden structural components using available location techniques. It is sometimes necessary to drill holes in order to access and inject foam into insect galleries. Apply the product to voids/areas where insects frequent, breed, and hide.

Carefully read the product label for application instructions and precautions.

Where to Apply CB D-Force HPX

CB D-Force is for use in and around: Homes, Apartments, Hospitals, Hotels, Food Handling Establishments, Restaurants, Food Processing Plants, Industrial Buildings, Storage Areas, Warehouses, and Transport Vehicles.

DRAGNET SFR Product Label

DRAGNET SFR Material Safety Data Sheet (MSDS)

Dragnet SFR - 1 Qt

From the makers of CB Residuals and Talstar insecticides comes another revolutionary termiticide with enhanced residual and contact kill capabilities. FMC's Dragnet SFR Termiticide/Insecticide does not break down easily in soil and retains its potency for extended periods of time. Specially formulated for subterranean termites, Dragnet also targets a wide range of indoor and outdoor pest insects. Versatile and very economical, one quart yields 100 gallons of solution that can be used in a variety of applications.

Why Should You Use Dragnet SFR ?

Dragnet SFR is superior in both residual control and contact kills to more than 50 insects in its label.

Directions for Dragnet SFR Use

Dragnet SFR is a concentrate that must be diluted in water to create emulsions. Active ingredient content may vary from 0.5% to 2.0% depending on treatments or target pests. Use this product for pre-construction treatments of structures or to treat existing termite infestations in and around buildings and structures. Knowledge of treatment techniques such as rodding, trenching, sub-slab injections, void injections and crack and crevice treatments is essential in order to have effective control of termites. Use this product for residual pest control in and on buildings and their immediate surroundings. Dragnet SFR may be used in broadcast applications, spot applications, crack and crevice injections or as a paint-on treatment. Consult the product label for more details.

Where to Apply Dragnet SFR

Dragnet SFR is for use in and around residential, commercial, public and industrial buildings. This includes homes, apartments, laboratories, greenhouses, non-food areas of food handling store areas, warehouses, schools, nursing homes, hospitals, transports and food processing, manufacturing and servicing establishments.

DRAGNET SFR Product Label

DRAGNET SFR Material Safety Data Sheet (MSDS)

Dragnet SFR - 1 Qt

From the makers of CB Residuals and Talstar insecticides comes another revolutionary termiticide with enhanced residual and contact kill capabilities. FMC's Dragnet SFR Termiticide/Insecticide does not break down easily in soil and retains its potency for extended periods of time. Specially formulated for subterranean termites, Dragnet also targets a wide range of indoor and outdoor pest insects. Versatile and very economical, one quart yields 100 gallons of solution that can be used in a variety of applications.

Why Should You Use Dragnet SFR ?

Dragnet SFR is superior in both residual control and contact kills to more than 50 insects in its label.

Directions for Dragnet SFR Use

Dragnet SFR is a concentrate that must be diluted in water to create emulsions. Active ingredient content may vary from 0.5% to 2.0% depending on treatments or target pests. Use this product for pre-construction treatments of structures or to treat existing termite infestations in and around buildings and structures. Knowledge of treatment techniques such as rodding, trenching, sub-slab injections, void injections and crack and crevice treatments is essential in order to have effective control of termites. Use this product for residual pest control in and on buildings and their immediate surroundings. Dragnet SFR may be used in broadcast applications, spot applications, crack and crevice injections or as a paint-on treatment. Consult the product label for more details.

Where to Apply Dragnet SFR

Dragnet SFR is for use in and around residential, commercial, public and industrial buildings. This includes homes, apartments, laboratories, greenhouses, non-food areas of food handling store areas, warehouses, schools, nursing homes, hospitals, transports and food processing, manufacturing and servicing establishments.

Drione dust Product Label

Drione dust Material Safety Data Sheet (MSDS)

How to Applying Dust Insecticide

Drione Dust - 1 lb.

Drione Dust provides contact kill and residual control of target pests in and around homes. A powerful combination of pyrethrins, synergists and desiccants makes Drione an excellent dust. A broad label product, Drion controls dozens of common house pests including pantry pests. When used as directed, residuals may last for 6 months if undisturbed.

Why Should You Use?

Drione contains a combination desiccants and pyrethrins that dehydrates and poisons insects, killing them off in two lethal blows.

Directions for Use

Application of Drione is limited to crack and crevice treatments only. Using hand dusters, powered dusters or similar equipment, apply the product in cracks and crevices, voids, gaps between structural components, spaces under and behind appliances, inside cabinets and closets, under sinks, along plumbing, crawl spaces and other infested areas. Apply at the rate of 2 ounces per 100 square feet in kennels and animal quarters. For severe infestations, apply Drione at the rate of 16 ounces per 1000 square feet of surface area. Please read the product label for directions on how to control specific pests.

Please read the product label for application instructions and the recommended application rates. Pestmall offers Centrobulb Dusters and Bellow Dusters needed to apply Drione Dust Insecticides.

Where to Apply

Drione Dust is labeled for use in and around food and non-food areas of residential, commercial, agricultural and industrial buildings. Permitted areas of use include homes, apartments, hospitals, schools, warehouses, restaurants, office buildings, hotels, trucks, trailers and lawns.

Drione dust Product Label

Drione dust Material Safety Data Sheet (MSDS)

How to Applying Dust Insecticide

Drione Dust - 1 lb.

Drione Dust provides contact kill and residual control of target pests in and around homes. A powerful combination of pyrethrins, synergists and desiccants makes Drione an excellent dust. A broad label product, Drion controls dozens of common house pests including pantry pests. When used as directed, residuals may last for 6 months if undisturbed.

Why Should You Use?

Drione contains a combination desiccants and pyrethrins that dehydrates and poisons insects, killing them off in two lethal blows.

Directions for Use

Application of Drione is limited to crack and crevice treatments only. Using hand dusters, powered dusters or similar equipment, apply the product in cracks and crevices, voids, gaps between structural components, spaces under and behind appliances, inside cabinets and closets, under sinks, along plumbing, crawl spaces and other infested areas. Apply at the rate of 2 ounces per 100 square feet in kennels and animal quarters. For severe infestations, apply Drione at the rate of 16 ounces per 1000 square feet of surface area. Please read the product label for directions on how to control specific pests.

Please read the product label for application instructions and the recommended application rates. Pestmall offers Centrobulb Dusters and Bellow Dusters needed to apply Drione Dust Insecticides.

Where to Apply

Drione Dust is labeled for use in and around food and non-food areas of residential, commercial, agricultural and industrial buildings. Permitted areas of use include homes, apartments, hospitals, schools, warehouses, restaurants, office buildings, hotels, trucks, trailers and lawns.

Eco Exempt IC 2 Product Label

Eco Exempt IC 2 Material Safety Data Sheet (MSDS)

Eco exempt IC-2 Insecticde (Essentria IC - 3)

Eco exempt IC-2 Insecticde (Essentria IC - 3) uses a knockdown method to kill pests the minute they come into contact with it. EcoExempt IC is an all-natural substance made from oils such as rosemary, wintergreen, and eugenol. Unlike chemical pesticides, EcoExempt IC-2 leaves behind a botanical scent. EcoExempt IC- 2 works great for corners, cracks, and crevices.

Inside: Apartment buildings, bakeries, beverage plants, bottling facilities, breweries, cafeterias, candy plants, canneries, cereal processing and manufacturing plants, dairy barns, poultry facilities, flour mills, food processing plants, frozen food plants, homes, hospitals, hotels, houses, industrial buildings, kennels, kitchens, laboratories, manufacturing facilities, mausoleums, meat processing and packaging plants, meat and vegetable canneries, motels, nursing homes, office buildings, restaurants, schools, stores, supermarkets, warehouses, and similar structures.

Outside:Building foundations, dairy facilities, drive-in restaurants, drive-in theaters, golf courses, parks, playgrounds, poultry houses, recreational areas, schools, urban areas, lawns, landscape areas, trees, turf, and zoos.

For sensitive indoor/outdoor surfaces such as vinyl, plastic, fabric, wood floors, etc. test a small non-visible area first before spraying. This includes vinyl siding, outdoor furniture, storm doors and windows, etc. It is possible that EcoEXEMPT IC2 may mar some sensitive surfaces. If spray gets on any sensitive surface that is listed, simply rinse with water and wipe off with clean cloth. EcoEXEMPT IC2 may be diluted with water or oil and applied with conventional application equipment including, but not limited to, compressed air sprayers and power sprayers. When diluting with water, prepare only the amount needed for immediate use and maintain agitation during use. Do Not Store Spray Solution Overnight. For oil dilutions that are applied in food handling establishments, a deodorized petroleum oil which conforms to CFR 21 (especially section 172.884) is required (such as Exxon Isopar M, Ashland Low Odor Base Solvent, or the equivalents). Tank mix applications must be made in accordance with the more restrictive of label limitations and precautions. No label dosages may be exceeded. This product cannot be tank mixed with any product with label prohibitions against such mixing.

Advantages of EcoEXEMPT IC-2

Quick knockdown/kill
Residual protection
Flexible label
Indoor/outdoor use
Broad spectrum
Non-staining
Highly versatile
Low aquatic toxicity
For conventional, misting and fogging equipment
Great for mosquito control programs
New softer botanical scent
May be used for on-animal applications

Do not apply directly to house plants. Cover/avoid any pools or aquaria prior to spraying.

GENERAL PEST CONTROL with Eco EXEMPT IC - 2:

To control accessible, exposed stages of crawling insects including, but not limited to, Ants, Cockroaches, Cadelles, Cigarette Beetles, Dark Mealworms, Dried Fruit Beetles, Drugstore Beetles, Confused Floor Beetles, Grain Mites, Fowl mites, Mites, Red Flour Beetles, Rice Weevils, Saw-toothed Grain Beetles, Spiders, Spider Beetles, Termites, Yellow Mealworms in sites that include, but are not limited to, apartments, homes, restaurants, food processing plants, industrial installations and warehouses, dilute at the rate of up to .5 to 6 fluid ounces of EcoEXEMPT IC2 per gallon of water (use lower rate for maintenance service and higher rates for active infestations). Thoroughly spray non-visible areas where these insects are usually found with special attention to cracks and crevices, niches, dark corners, drains and other harborage sites. To prevent potential discoloring, do not spray on visible areas (i.e. baseboards, door frames, walls, etc.) and wipe away excess. Food processing operations may continue when EcoEXEMPT IC2 is applied as a surface, spot or crack and crevice treatment in accordance with the directions and precautions given above.

FOGGING with Eco EXEMPT IC - 2:

To control crawling and flying insects (Flies, Moths, Fruit Flies, etc) in sites that include, but are not limited to, food processing plants, (INCLUDING USDA INSPECTED FACILITIES), industrial installations, animal quarters (cattle barns, horse barns, poultry barns, swine houses, zoos and warehouses), EcoEXEMPT IC2 may be applied as a space spray through conventional fogging equipment. Cover or remove exposed food and cover food-handling surfaces in edible product areas of food handling establishments. Also cover sensitive surfaces (plastics, etc). Close and shut off air conditioning or ventilating equipment. Mix 4 to10 ounces of EcoEXEMPT IC2 insecticide with sufficient oil to equal 1 gallon of diluted spray. (It is recommended to use lower rates in most food facility applications). Apply at a rate of 1 to 3 fluid ounces per 1000 cubic feet, filling the room with mist (or fog, if thermal equipment is used). Keep area closed for at least 15 minutes. Vacate treated area. Ventilate before reoccupying. Fogging may create slippery conditions on painted floor surfaces. Retreat if reinfestation occurs. The product does contain plant oils that are inherently fragrant. When used in confined spaces, prolonged exposure to the fragrance may be objectionable to some individuals.

Eco Exempt IC 2 Product Label

Eco Exempt IC 2 Material Safety Data Sheet (MSDS)

Eco exempt IC-2 Insecticde (Essentria IC - 3)

Eco exempt IC-2 Insecticde (Essentria IC - 3) uses a knockdown method to kill pests the minute they come into contact with it. EcoExempt IC is an all-natural substance made from oils such as rosemary, wintergreen, and eugenol. Unlike chemical pesticides, EcoExempt IC-2 leaves behind a botanical scent. EcoExempt IC- 2 works great for corners, cracks, and crevices.

Inside: Apartment buildings, bakeries, beverage plants, bottling facilities, breweries, cafeterias, candy plants, canneries, cereal processing and manufacturing plants, dairy barns, poultry facilities, flour mills, food processing plants, frozen food plants, homes, hospitals, hotels, houses, industrial buildings, kennels, kitchens, laboratories, manufacturing facilities, mausoleums, meat processing and packaging plants, meat and vegetable canneries, motels, nursing homes, office buildings, restaurants, schools, stores, supermarkets, warehouses, and similar structures.

Outside:Building foundations, dairy facilities, drive-in restaurants, drive-in theaters, golf courses, parks, playgrounds, poultry houses, recreational areas, schools, urban areas, lawns, landscape areas, trees, turf, and zoos.

For sensitive indoor/outdoor surfaces such as vinyl, plastic, fabric, wood floors, etc. test a small non-visible area first before spraying. This includes vinyl siding, outdoor furniture, storm doors and windows, etc. It is possible that EcoEXEMPT IC2 may mar some sensitive surfaces. If spray gets on any sensitive surface that is listed, simply rinse with water and wipe off with clean cloth. EcoEXEMPT IC2 may be diluted with water or oil and applied with conventional application equipment including, but not limited to, compressed air sprayers and power sprayers. When diluting with water, prepare only the amount needed for immediate use and maintain agitation during use. Do Not Store Spray Solution Overnight. For oil dilutions that are applied in food handling establishments, a deodorized petroleum oil which conforms to CFR 21 (especially section 172.884) is required (such as Exxon Isopar M, Ashland Low Odor Base Solvent, or the equivalents). Tank mix applications must be made in accordance with the more restrictive of label limitations and precautions. No label dosages may be exceeded. This product cannot be tank mixed with any product with label prohibitions against such mixing.

Advantages of EcoEXEMPT IC-2

Quick knockdown/kill
Residual protection
Flexible label
Indoor/outdoor use
Broad spectrum
Non-staining
Highly versatile
Low aquatic toxicity
For conventional, misting and fogging equipment
Great for mosquito control programs
New softer botanical scent
May be used for on-animal applications

Do not apply directly to house plants. Cover/avoid any pools or aquaria prior to spraying.

GENERAL PEST CONTROL with Eco EXEMPT IC - 2:

To control accessible, exposed stages of crawling insects including, but not limited to, Ants, Cockroaches, Cadelles, Cigarette Beetles, Dark Mealworms, Dried Fruit Beetles, Drugstore Beetles, Confused Floor Beetles, Grain Mites, Fowl mites, Mites, Red Flour Beetles, Rice Weevils, Saw-toothed Grain Beetles, Spiders, Spider Beetles, Termites, Yellow Mealworms in sites that include, but are not limited to, apartments, homes, restaurants, food processing plants, industrial installations and warehouses, dilute at the rate of up to .5 to 6 fluid ounces of EcoEXEMPT IC2 per gallon of water (use lower rate for maintenance service and higher rates for active infestations). Thoroughly spray non-visible areas where these insects are usually found with special attention to cracks and crevices, niches, dark corners, drains and other harborage sites. To prevent potential discoloring, do not spray on visible areas (i.e. baseboards, door frames, walls, etc.) and wipe away excess. Food processing operations may continue when EcoEXEMPT IC2 is applied as a surface, spot or crack and crevice treatment in accordance with the directions and precautions given above.

FOGGING with Eco EXEMPT IC - 2:

To control crawling and flying insects (Flies, Moths, Fruit Flies, etc) in sites that include, but are not limited to, food processing plants, (INCLUDING USDA INSPECTED FACILITIES), industrial installations, animal quarters (cattle barns, horse barns, poultry barns, swine houses, zoos and warehouses), EcoEXEMPT IC2 may be applied as a space spray through conventional fogging equipment. Cover or remove exposed food and cover food-handling surfaces in edible product areas of food handling establishments. Also cover sensitive surfaces (plastics, etc). Close and shut off air conditioning or ventilating equipment. Mix 4 to10 ounces of EcoEXEMPT IC2 insecticide with sufficient oil to equal 1 gallon of diluted spray. (It is recommended to use lower rates in most food facility applications). Apply at a rate of 1 to 3 fluid ounces per 1000 cubic feet, filling the room with mist (or fog, if thermal equipment is used). Keep area closed for at least 15 minutes. Vacate treated area. Ventilate before reoccupying. Fogging may create slippery conditions on painted floor surfaces. Retreat if reinfestation occurs. The product does contain plant oils that are inherently fragrant. When used in confined spaces, prolonged exposure to the fragrance may be objectionable to some individuals.

Eco Exempt G Product Label

Eco Exempt G Material Safety Data Sheet (MSDS)

Eco Exempt G Granules

Eco Exempt G Granules offers total residual protection that includes knockdown, kill and repellency to outdoor pests such as ants, cockroaches, centipedes and many more. Eco Exempt features Hexa-Hydroxyl, a combination of plant oils (Thyme Oil and Clove Oil) known to have potent insecticidal properties. Effective, safe and economical, this product provides the same performance as other pesticides without the risk to humans, animals and the environment.

Why Should You Use Eco Exempt G Granules?

Using natural oils for control of pests, Eco Exempt is one of the safest insecticides available.

Directions for Eco Exempt G Granules Use

Eco Exempt G is intended for outdoor applications only. With hand-operated or powered spreaders, use the product for outdoor perimeter treatments and broadcast applications. Reapply if necessary.

FOR PERIMETER TREATMENTS: Apply uniformly as possible to ground area around and adjacent to structures. Treat bands of soil measuring 6 to 10 ft. in width at the rate of 2 to 5 lbs. per 1,000 square feet.

FOR BROADCAST TREATMENTS IN TURF AND LANDSCAPED AREAS: Apply at a rate of 3 to 5 lbs. per 1,000 sq. ft. of area. Irrigate treated area with ⅛ to 1/4 inches of water for best results.

Where to Apply Eco Exempt G Granules

Eco Exempt G is for use in landscaped areas and perimeters around residential, institutional, public, commercial and industrial buildings.

Fast Out CS Foam Product Label

Fast Out CS Foam Material Safety Data Sheet (MSDS)

FastOut CS Foam Tech Note

FastOut CS Foam

FastOut CS Foam is a non-repellent insecticide that features SmartCap microencapsulation technology. Developed by Whitmire Micro-Gen, SmartCap bolsters the performance of residuals, leading to fast kills and effective control of infestations. FastOut contains microencapsulated Cyfluthrin in a non-repellent foam solution with an exceptional expansion rate. Available in a ready-to-use bottle that provides easy delivery of foam to cracks and voids for quicker control of target pests.

Why Should You Use ?

FastOut CS is a ready-to-use product for foam applications. No measuring, no mixing and no equipment necessary. Just point and shoot, all your pest problems are gone with FastOut.

Directions for Use

Shake well before use. FastOut CS can be used for crack and crevice treatments or spot treatments to treat infestations in cracks and crevices, voids, or in exposed areas. The product is intended for support treatments in localized areas in structures and cannot be used as a substitute for stand-alone termite treatments. With the attached injector tube and tip, hold the actuator for about 8 seconds and dispense the product thoroughly in treatment areas. Application to exposed areas must be limited to sites with minimum exposure. When treating exposed areas, allow the foam/residue to dissipate and clean the area afterwards. Inject the product through structural voids, insect galleries, nests and other insect hiding spots. Treat trails, entry/exit sites and other areas where pests are found entering/exiting structures. Please refer to the product label for specific use directions.

Where to Apply

FastOut CS is for use in: Apartments, Homes, Hospitals, Hotels, Food Handling Establishments, Restaurants, Hotels, Hospitals and Nursing Homes (Non-patient Areas), Motels, Hobby Greenhouses, Interiorscapes, Office Buildings, Schools, Transportation Equipment (Buses, Boats, Ships, Trains, Planes) and Warehouses and Other Commercial and Industrial Buildings.

Fast Out CS Foam Product Label

Fast Out CS Foam Material Safety Data Sheet (MSDS)

FastOut CS Foam Tech Note

FastOut CS Foam

FastOut CS Foam is a non-repellent insecticide that features SmartCap microencapsulation technology. Developed by Whitmire Micro-Gen, SmartCap bolsters the performance of residuals, leading to fast kills and effective control of infestations. FastOut contains microencapsulated Cyfluthrin in a non-repellent foam solution with an exceptional expansion rate. Available in a ready-to-use bottle that provides easy delivery of foam to cracks and voids for quicker control of target pests.

Why Should You Use ?

FastOut CS is a ready-to-use product for foam applications. No measuring, no mixing and no equipment necessary. Just point and shoot, all your pest problems are gone with FastOut.

Directions for Use

Shake well before use. FastOut CS can be used for crack and crevice treatments or spot treatments to treat infestations in cracks and crevices, voids, or in exposed areas. The product is intended for support treatments in localized areas in structures and cannot be used as a substitute for stand-alone termite treatments. With the attached injector tube and tip, hold the actuator for about 8 seconds and dispense the product thoroughly in treatment areas. Application to exposed areas must be limited to sites with minimum exposure. When treating exposed areas, allow the foam/residue to dissipate and clean the area afterwards. Inject the product through structural voids, insect galleries, nests and other insect hiding spots. Treat trails, entry/exit sites and other areas where pests are found entering/exiting structures. Please refer to the product label for specific use directions.

Where to Apply

FastOut CS is for use in: Apartments, Homes, Hospitals, Hotels, Food Handling Establishments, Restaurants, Hotels, Hospitals and Nursing Homes (Non-patient Areas), Motels, Hobby Greenhouses, Interiorscapes, Office Buildings, Schools, Transportation Equipment (Buses, Boats, Ships, Trains, Planes) and Warehouses and Other Commercial and Industrial Buildings.

Ever Green Dust Product Label

Ever Green Dust Material Safety Data Sheet (MSDS)

PyGanic Dust (EverGreen Pyrethrum Dust) - 10 oz.

One of the most trusted insecticide dusts, PyGanic delivers fast control over 230 pests. Each bottle of PyGanic contains pure, unsynergized Pyrethrum derived from chrysanthemum flowers. With its natural active ingredient and non-toxic formulation, PyGanic is safe to use in food/feed handling areas, livestock animals and ornamental plants.

Why Should You Use?

EverGreen Pyrethrum Dust can be used to control different kinds of infestations.

Directions for Use

Please read the product label for application instructions and the recommended application rates. Pestmall offers Centrobulb Dusters and Bellow Dusters needed to apply PyGanic Dust (EverGreen Pyrethrum Dust) Insecticides.

TREATMENT OF STORED PRODUCT PESTS IN NON-FOOD/FEED AREAS: Before treatments, clean infested areas and remove infested materials, dirt and other debris. Apply at the rate of 16 to 24 ounces per 1,000 square feet of area. Thoroughly treat surfaces, floors, shelves, drawers, cabinets, cartons, containers in storage areas. Apply one ounce per 50 square feet into cracks and crevices, voids and other hard to reach areas.

INDOOR TREATMENT OF CRAWLING INSECTS: Apply EverGreen Dust at the rate of 1.5 oz. per 50 sq. ft. into cracks, crevices and voids where insects live and breed. Apply uniformly to areas under and behind sinks, refrigerators, stoves and washing machines, around garbage cans, cabinets, shelves, baseboards, door frames, drains, pipes and other sites where insects are seen. Treat crawlspaces and attics at the rate of 16 to 20 ounces per 1,000 square feet.

TREATMENT OF FLEAS, TICKS AND MITES: Remove pets from treatment areas. Thoroughly treat pet beddings, resting areas, sleeping quarters, kennels, carpets, rugs, furniture and other infected areas and their surroundings. Do not treat pets with this product.

TREATING BED BUGS: Take bed apart and apply EverGreen to bed frame, headboards and footboards at the rate of 2 oz. per 50 sq. ft. of surface area. Dust mattresses, cushions and furniture especially on folds, tufts and seams. Pay special attention to cracks and crevices between components, in walls, electrical boxes, appliances, picture frames, jambs, window sills, shelves, cabinets, curtains, blinds and their mounts.

PERIMETER TREATMENTS: Apply to a band of soil measuring 6 to 10 feet wide around and adjacent to structures and around foundations. Apply at the rate of 16 - 24 oz. per 1,000 sq. ft. Treat exterior surfaces to a height of 2 to 3 feet.

CONTROLLING LAWN, LANDSCAPE AND ORNAMENTAL PESTS: Apply EverGreen Dust at the rate of 8 to 24 ounces per 1,000 square feet. Apply uniformly to lawn surface and to areas under shrubs and trees. Wait for the dust to settle before irrigating treated surfaces.

TREATMENT IN LIVESTOCK PREMISES AND DOMESTIC ANIMALS: Cover Apply to indoor and outdoor animal areas at the rate of 16 to 24 oz. per 1,000 square feet. Treat cracks and crevices, structural joints, floors, trusses, rafters, ceilings, gates and other areas harboring pests. Conduct perimeter treatments as stated above. Apply 1 to 2 ounces of dust per animal using appropriate application equipment. Apply to head, neck, shoulders, back and legs. Do not treat more than once every 10 days.

Where to Apply

PyGanic is labeled for use in and around food/feed or non-food/feed areas of agricultural, residential, commercial, food/feed handling and processing plants, industrial and institutional buildings.

Ever Green Dust Product Label

Ever Green Dust Material Safety Data Sheet (MSDS)

PyGanic Dust (EverGreen Pyrethrum Dust) - 10 oz.

One of the most trusted insecticide dusts, PyGanic delivers fast control over 230 pests. Each bottle of PyGanic contains pure, unsynergized Pyrethrum derived from chrysanthemum flowers. With its natural active ingredient and non-toxic formulation, PyGanic is safe to use in food/feed handling areas, livestock animals and ornamental plants.

Why Should You Use?

EverGreen Pyrethrum Dust can be used to control different kinds of infestations.

Directions for Use

Please read the product label for application instructions and the recommended application rates. Pestmall offers Centrobulb Dusters and Bellow Dusters needed to apply PyGanic Dust (EverGreen Pyrethrum Dust) Insecticides.

TREATMENT OF STORED PRODUCT PESTS IN NON-FOOD/FEED AREAS: Before treatments, clean infested areas and remove infested materials, dirt and other debris. Apply at the rate of 16 to 24 ounces per 1,000 square feet of area. Thoroughly treat surfaces, floors, shelves, drawers, cabinets, cartons, containers in storage areas. Apply one ounce per 50 square feet into cracks and crevices, voids and other hard to reach areas.

INDOOR TREATMENT OF CRAWLING INSECTS: Apply EverGreen Dust at the rate of 1.5 oz. per 50 sq. ft. into cracks, crevices and voids where insects live and breed. Apply uniformly to areas under and behind sinks, refrigerators, stoves and washing machines, around garbage cans, cabinets, shelves, baseboards, door frames, drains, pipes and other sites where insects are seen. Treat crawlspaces and attics at the rate of 16 to 20 ounces per 1,000 square feet.

TREATMENT OF FLEAS, TICKS AND MITES: Remove pets from treatment areas. Thoroughly treat pet beddings, resting areas, sleeping quarters, kennels, carpets, rugs, furniture and other infected areas and their surroundings. Do not treat pets with this product.

TREATING BED BUGS: Take bed apart and apply EverGreen to bed frame, headboards and footboards at the rate of 2 oz. per 50 sq. ft. of surface area. Dust mattresses, cushions and furniture especially on folds, tufts and seams. Pay special attention to cracks and crevices between components, in walls, electrical boxes, appliances, picture frames, jambs, window sills, shelves, cabinets, curtains, blinds and their mounts.

PERIMETER TREATMENTS: Apply to a band of soil measuring 6 to 10 feet wide around and adjacent to structures and around foundations. Apply at the rate of 16 - 24 oz. per 1,000 sq. ft. Treat exterior surfaces to a height of 2 to 3 feet.

CONTROLLING LAWN, LANDSCAPE AND ORNAMENTAL PESTS: Apply EverGreen Dust at the rate of 8 to 24 ounces per 1,000 square feet. Apply uniformly to lawn surface and to areas under shrubs and trees. Wait for the dust to settle before irrigating treated surfaces.

TREATMENT IN LIVESTOCK PREMISES AND DOMESTIC ANIMALS: Cover Apply to indoor and outdoor animal areas at the rate of 16 to 24 oz. per 1,000 square feet. Treat cracks and crevices, structural joints, floors, trusses, rafters, ceilings, gates and other areas harboring pests. Conduct perimeter treatments as stated above. Apply 1 to 2 ounces of dust per animal using appropriate application equipment. Apply to head, neck, shoulders, back and legs. Do not treat more than once every 10 days.

Where to Apply

PyGanic is labeled for use in and around food/feed or non-food/feed areas of agricultural, residential, commercial, food/feed handling and processing plants, industrial and institutional buildings.

CB Invader Label

CB Invader Material Safety Data Sheet (MSDS)

CB Invader - 14 oz.

CB Invader HPX is formulated with the carbamate insecticide Propoxur (Baygon). Invader is a residual insecticide for crack and crevice applications only. Though its use is limited, the product provides excellent contact kill and residual control of dozens of crawling pests.

Why Should You Use?

Invader is specially designed for crack and crevice treatments, offering quick knockdown and control to pests in hard to reach areas.

Directions for Use

Shake well before using. With the supplied extension tube, apply the product to cracks and crevices where insects are hiding, breeding and congregating. Apply to baseboards, entry holes, in moist areas under sinks, along plumbing, under and behind appliances, in damaged wooden structures and other areas where target insects are seen. Spray directly to insects if possible. Release 1 spray per spot. Place spots at 12-inch intervals for heavy infestations and 3 feet for light infestations/preventative treatments. Inject spray inside wooden members damaged by termites and other wood-boring insects.

Where to Apply

CB Invader is for use in homes, hotels, restaurants, hospitals, supermarkets, utilities, transportation equipment (buses, boats, ships, trains, trailers and aircraft) meat packing and food hand handling establishments, schools, warehouses and other commercial buildings.

Masterline Bifenthrin 7.9 Product Label

Masterline Bifenthrin 7.9 Material Safety Data Sheet (MSDS)

Masterline Bifenthrin 7.9 Brochure

Masterline Bifenthrin 7.9

Univar's Masterline Bifenthrin Insecticide/Termiticide offers superior control of indoor and outdoor pests such as termites, cockroaches, ants and many more. Its active ingredient, Bifenthrin, is popular for its broad spectrum of control and excellent residual properties. With Masterline's powerful residual formulation, expect effective and lasting control the toughest pest infestations in and around your homes.

Why Should You Use?

Masterline Bifenthrin 7.9 targets several indoor and outdoor pests. This highly versatile product is the solution to all your indoor and outdoor pest problems.

Directions for Use

Masterline Bifenthrin 7.9 is an emulsifiable concentrate intended for water dilutions. Finished solutions can be used for general surface treatments, crack and crevice treatments or spot applications. Finished emulsions may be converted to foam using suitable foaming agents. Insect growth regulators and other pesticides may be tank mixed together with the product unless explicitly prohibited by the product label. Masterline is excellent for use in treating termite infestations. Technicians must be familiar with termite control techniques such as trenching, rodding, sub-slab injection and coarse spray application for effective use of the product. Apply finished emulsions using appropriate equipment such as hand held or powered sprayers, brushes, foam applicators and other similar application equipment. Carefully read the product label for application directions, dilution rates and application rates.

Where to Apply

Masterline controls pests indoors and outdoors on residential, commercial, institutional, public, commercial and industrial buildings. Areas of use also include lawns, ornamental plants, interiorscapes, recreational areas and athletic fields.

Masterline Bifenthrin 7.9 Product Label

Masterline Bifenthrin 7.9 Material Safety Data Sheet (MSDS)

Masterline Bifenthrin 7.9 Brochure

Masterline Bifenthrin 7.9

Univar's Masterline Bifenthrin Insecticide/Termiticide offers superior control of indoor and outdoor pests such as termites, cockroaches, ants and many more. Its active ingredient, Bifenthrin, is popular for its broad spectrum of control and excellent residual properties. With Masterline's powerful residual formulation, expect effective and lasting control the toughest pest infestations in and around your homes.

Why Should You Use?

Masterline Bifenthrin 7.9 targets several indoor and outdoor pests. This highly versatile product is the solution to all your indoor and outdoor pest problems.

Directions for Use

Masterline Bifenthrin 7.9 is an emulsifiable concentrate intended for water dilutions. Finished solutions can be used for general surface treatments, crack and crevice treatments or spot applications. Finished emulsions may be converted to foam using suitable foaming agents. Insect growth regulators and other pesticides may be tank mixed together with the product unless explicitly prohibited by the product label. Masterline is excellent for use in treating termite infestations. Technicians must be familiar with termite control techniques such as trenching, rodding, sub-slab injection and coarse spray application for effective use of the product. Apply finished emulsions using appropriate equipment such as hand held or powered sprayers, brushes, foam applicators and other similar application equipment. Carefully read the product label for application directions, dilution rates and application rates.

Where to Apply

Masterline controls pests indoors and outdoors on residential, commercial, institutional, public, commercial and industrial buildings. Areas of use also include lawns, ornamental plants, interiorscapes, recreational areas and athletic fields.

Martins IGR Product Label

Martins IGR Material Safety Data Sheet (MSDS)

Martin's IGR- 4 oz.

Oftentimes, insecticide applications are inadequate in reducing pest populations for they leave survivors. In order to increase the efficiency of applications, insect growth regulators such as Martin's IGR. Insect growth regulators inhibit an insect's ability to develop into adults, effectively reducing pest populations and preventing future infestations.

Why Should You Use?

Martin's IGR offers long term control of target pests in a way that other insecticides can't. IGRs such as Martins have long term effects of control than residual insecticides.

Directions for Use

Martin's IGR is a liquid concentrate intended for water dilutions for general surface, spot or crack and crevice applications. Existing adult fleas and pupae are NOT affected by the product. Compatible adulticides may be tank mixed with the product for immediate and broader control. Prepare diluted solutions as indicated in the product label. Apply as a coarse, low pressure spray using appropriate application equipment such as hand sprayers, power sprayers.

FOR CONTROL OF FLEAS: Prepare a diluted solution by mixing 1 ounce of Martin's per gallon of water. Fill applicator tanks half full with water and add the product. Agitate or stir to have an even mixture. Add the remaining volume of water and re-agitate the tank. Compatible insecticides may be used in conjunction with Martin's IGR for immediate control of adult fleas. Apply solutions at the rate of 1 gallon per 1,500 square feet of treatment area. Apply to areas harboring fleas such as carpets, rugs, furniture, pet sleeping quarters, kennels, dog houses and other areas where pets frequent. Remove pets and children from treated areas until spray has completely dried.

FOR ASIAN, GERMAN AND BROWN BANDED COCKROACH AND CRICKETS: Mix 2 ounces of Martin's IGR with 1 gallon of water. Cockroach/criket adulticides may be tank mixed for immediate control of adult cockroaches and crickets. Apply to infested areas such as cracks and crevices, spaces under sinks, under and behind appliances, near garbage cans, in and around cabinets, doors and window sills, along pipes, drains and plumbing using proper application equipment. Repeat treatments as necessary.

FOR OUTDOOR USE IN LAWNS, TREES AND ORNAMENTALPLANTS: Prepare a diluted solution by mixing 1 ounce of Martin's IGR in 5 to 15 gallons of water to cover 1,000 square feet of outdoor surfaces. Using hose-end sprayer, tank type sprayer or sprinkler cans, spray in a slow, even motion to treatment areas. Repeat applications every 21 days.

FOR PERIMETER TREATMENTS: Mix 1 ounce of IGR per gallon of water. Treat a band of soil measuring 2 to 4 feet in width around and adjacent to buildings.

Where to Apply

Animal Quarters (enclosed premise treatment), Apartments, Atriums, Attics, Automobiles, Bathrooms, Basements, Bedrooms, Boats, Buses, Cabinets, Cabins, Cafeterias, Campers, Campsites, Carpet, Cat Living Quarters (enclosed premise treatment), Chests, Closed Porches, Closets, Clothes Storage, Commercial Buildings, Condominiums, Crawl Spaces, Crematoriums, Day Care Centers, Decks, Delicatessens, Dens, Dog Houses, Dog Living Quarters, Dog Kennel Runs, Dormitories, Draperies, Dressers, Drive-Ins, Drugstores, Fabric Storage Areas, Factories, Floors, Funeral Parlors, Furniture, Garages, Garbage Areas, Garbage Cans, Gazebos, Homes, Hospitals, Hotels, Indoor Eating Establishments, Industrial Plants, Institutional Dining Areas, Institutions, Jails, Kennels, Kitchens, Lanais, Lawns, Living Rooms, Locker Rooms, Mausoleums, Mess Halls, Mobile Canteens, Mobile Homes, Morgues, Mortuaries, Motels, Nursing Homes, Office Buildings, Other Public Buildings, Outdoor Eating Establishments, Pantry, Parks, Patios, Pet Bedding, Pet Carriers, Pet Grooming Parlors, Pet Sleeping Areas, Pet Stores, Pet Quarters (enclosed premise treatment), Play Houses, Play Rooms, Porches, Prisons, Recreational Areas Indoors, Recreational Areas Outdoors, Recreation Vehicles, Restaurants, Rooms, Rugs, Schools, Ships, Shutters, Side Yards, Solariums, Sport Stadiums, Storage Areas, Sun Rooms, Sun Porches, Supermarkets, Taverns, Theaters, Town Houses, Trailers, Trains, Transportation Vehicles, Tree Houses, Upholstered Furniture, Utility Room Indoor, Utility Room Outdoor, Vending Machines, Verandas, Veterinaries, Warehouses, Washrooms, and Zoos.

Martins IGR Product Label

Martins IGR Material Safety Data Sheet (MSDS)

Martin's IGR- 4 oz.

Oftentimes, insecticide applications are inadequate in reducing pest populations for they leave survivors. In order to increase the efficiency of applications, insect growth regulators such as Martin's IGR. Insect growth regulators inhibit an insect's ability to develop into adults, effectively reducing pest populations and preventing future infestations.

Why Should You Use?

Martin's IGR offers long term control of target pests in a way that other insecticides can't. IGRs such as Martins have long term effects of control than residual insecticides.

Directions for Use

Martin's IGR is a liquid concentrate intended for water dilutions for general surface, spot or crack and crevice applications. Existing adult fleas and pupae are NOT affected by the product. Compatible adulticides may be tank mixed with the product for immediate and broader control. Prepare diluted solutions as indicated in the product label. Apply as a coarse, low pressure spray using appropriate application equipment such as hand sprayers, power sprayers.

FOR CONTROL OF FLEAS: Prepare a diluted solution by mixing 1 ounce of Martin's per gallon of water. Fill applicator tanks half full with water and add the product. Agitate or stir to have an even mixture. Add the remaining volume of water and re-agitate the tank. Compatible insecticides may be used in conjunction with Martin's IGR for immediate control of adult fleas. Apply solutions at the rate of 1 gallon per 1,500 square feet of treatment area. Apply to areas harboring fleas such as carpets, rugs, furniture, pet sleeping quarters, kennels, dog houses and other areas where pets frequent. Remove pets and children from treated areas until spray has completely dried.

FOR ASIAN, GERMAN AND BROWN BANDED COCKROACH AND CRICKETS: Mix 2 ounces of Martin's IGR with 1 gallon of water. Cockroach/criket adulticides may be tank mixed for immediate control of adult cockroaches and crickets. Apply to infested areas such as cracks and crevices, spaces under sinks, under and behind appliances, near garbage cans, in and around cabinets, doors and window sills, along pipes, drains and plumbing using proper application equipment. Repeat treatments as necessary.

FOR OUTDOOR USE IN LAWNS, TREES AND ORNAMENTALPLANTS: Prepare a diluted solution by mixing 1 ounce of Martin's IGR in 5 to 15 gallons of water to cover 1,000 square feet of outdoor surfaces. Using hose-end sprayer, tank type sprayer or sprinkler cans, spray in a slow, even motion to treatment areas. Repeat applications every 21 days.

FOR PERIMETER TREATMENTS: Mix 1 ounce of IGR per gallon of water. Treat a band of soil measuring 2 to 4 feet in width around and adjacent to buildings.

Where to Apply

Animal Quarters (enclosed premise treatment), Apartments, Atriums, Attics, Automobiles, Bathrooms, Basements, Bedrooms, Boats, Buses, Cabinets, Cabins, Cafeterias, Campers, Campsites, Carpet, Cat Living Quarters (enclosed premise treatment), Chests, Closed Porches, Closets, Clothes Storage, Commercial Buildings, Condominiums, Crawl Spaces, Crematoriums, Day Care Centers, Decks, Delicatessens, Dens, Dog Houses, Dog Living Quarters, Dog Kennel Runs, Dormitories, Draperies, Dressers, Drive-Ins, Drugstores, Fabric Storage Areas, Factories, Floors, Funeral Parlors, Furniture, Garages, Garbage Areas, Garbage Cans, Gazebos, Homes, Hospitals, Hotels, Indoor Eating Establishments, Industrial Plants, Institutional Dining Areas, Institutions, Jails, Kennels, Kitchens, Lanais, Lawns, Living Rooms, Locker Rooms, Mausoleums, Mess Halls, Mobile Canteens, Mobile Homes, Morgues, Mortuaries, Motels, Nursing Homes, Office Buildings, Other Public Buildings, Outdoor Eating Establishments, Pantry, Parks, Patios, Pet Bedding, Pet Carriers, Pet Grooming Parlors, Pet Sleeping Areas, Pet Stores, Pet Quarters (enclosed premise treatment), Play Houses, Play Rooms, Porches, Prisons, Recreational Areas Indoors, Recreational Areas Outdoors, Recreation Vehicles, Restaurants, Rooms, Rugs, Schools, Ships, Shutters, Side Yards, Solariums, Sport Stadiums, Storage Areas, Sun Rooms, Sun Porches, Supermarkets, Taverns, Theaters, Town Houses, Trailers, Trains, Transportation Vehicles, Tree Houses, Upholstered Furniture, Utility Room Indoor, Utility Room Outdoor, Vending Machines, Verandas, Veterinaries, Warehouses, Washrooms, and Zoos.

Mavrik Perimeter Product Label

Mavrik Perimeter Material Safety Data Sheet (MSDS)

Mavrik Perimeter Supplemental Label

Mavrik Perimeter - 8 oz.

Mavrik is with a broad spectrum pyrethroid that controls an array of pests that infest areas around the perimeter of residential and commercial buildings. Mavrik provides immediate knockdown of a variety of insects including ant and mosquitoes outsdoors and once dried, it leaves no visible residues or lingering odor that are non-toxic and non-repellent to honeybees.

For Use in and around: Lawns, Gardens, Trees, Shrubs, Roses, Flower beds - See the Mavrik Perimeter Label for a complete list of application sites.

How It Works

Controlling ants and mosquitoes in your customers' yards is a great way to keep both from becoming major problems in and around your customers' homes. Mavrik Perimeter contains the pyrethroid fluvalinate, which provides quick knockdown of pests.

Microcare Product Label

Microcare Material Safety Data Sheet (MSDS)

Microcare Aerosol Pyrethrum - 20oz

Microcare Pressurized Pyrethrum Spray features SmartCap Microencapsulation Technology for quicker kills and lasting residual control of target pests. SmartCap enhances the performance of residuals by containing the active ingredient in microscopic capsules and protect it from contaminants. These microcapsules in turn, provide excellent adhesion to insect exoskeletons and surfaces. The active ingredient is transferred to other insects and released as pests preen themselves. Microcare kills several household pests and is perfect for use as a contact, space, surface, spot or crack and crevice spray.

Why Should You Use?

Microcare is a broad label insecticide that kills crawling and flying insects. A perfect product to use in sensitive conditions in residences due to its low toxicity.

Directions for Use

Shake well before use. Apply directly to exposed pests and surfaces. Application in food handling establishments is limited to crack and crevice treatments only. Use Microcare with the supplied actuator and injection tubes for crack and crevice treatments. Place injector tips into cracks and crevices and depress the actuator. Apply by moving the injector tip one lineal foot per second for heavy infestations and 3 lineal feet per second for light infestations.

FOR ANTS, COKCROACHES, CRICKETS, FIREBRATS, SILVERFISH, SPIDERS: Treat infested areas, cracks and crevices, voids, tunnels, moist areas, around pipes and openings, under sinks, refrigerators and stoves, behind cabinets, shelves and drawers, walls, floors and doors. Contact insects as much as possible. Repeat treatments once a week.

FOR CARPET BEETLES, LICE, TICKS, AND FLEAS: Vacuum carpets, rugs, furniture, closets, cushions and floor coverings to capture loose insects. Seal and dispose of used vacuum bags properly. Treat infected areas thoroughly and evenly.

FOR OUTDOOR SURFACE AND PERIMTER TREATMENTS: Spray outside surfaces of screens, window frames, doors, light fixtures and other surfaces where insects are seen congregating. Treat a band of soil measuring 6 to 10 feet wide around and adjacent of structures to create a barrier against ants, cockroaches, crickets, earwigs and scorpions. Treat building foundations to a height of 2 to 3 feet where pests may find entrance.

Where to Apply

Microcare is for use in transportation equipment, food handling and processing plants, campgrounds, food storage areas, homes, hospitals, hotels/motels, kennels, nursing homes, office buildings, picnic areas, residences, restaurants, schools, supermarkets, warehouses and other residential, commercial, industrial establishments.

Microcare Product Label

Microcare Material Safety Data Sheet (MSDS)

Microcare Aerosol Pyrethrum - 20oz

Microcare Pressurized Pyrethrum Spray features SmartCap Microencapsulation Technology for quicker kills and lasting residual control of target pests. SmartCap enhances the performance of residuals by containing the active ingredient in microscopic capsules and protect it from contaminants. These microcapsules in turn, provide excellent adhesion to insect exoskeletons and surfaces. The active ingredient is transferred to other insects and released as pests preen themselves. Microcare kills several household pests and is perfect for use as a contact, space, surface, spot or crack and crevice spray.

Why Should You Use?

Microcare is a broad label insecticide that kills crawling and flying insects. A perfect product to use in sensitive conditions in residences due to its low toxicity.

Directions for Use

Shake well before use. Apply directly to exposed pests and surfaces. Application in food handling establishments is limited to crack and crevice treatments only. Use Microcare with the supplied actuator and injection tubes for crack and crevice treatments. Place injector tips into cracks and crevices and depress the actuator. Apply by moving the injector tip one lineal foot per second for heavy infestations and 3 lineal feet per second for light infestations.

FOR ANTS, COKCROACHES, CRICKETS, FIREBRATS, SILVERFISH, SPIDERS: Treat infested areas, cracks and crevices, voids, tunnels, moist areas, around pipes and openings, under sinks, refrigerators and stoves, behind cabinets, shelves and drawers, walls, floors and doors. Contact insects as much as possible. Repeat treatments once a week.

FOR CARPET BEETLES, LICE, TICKS, AND FLEAS: Vacuum carpets, rugs, furniture, closets, cushions and floor coverings to capture loose insects. Seal and dispose of used vacuum bags properly. Treat infected areas thoroughly and evenly.

FOR OUTDOOR SURFACE AND PERIMTER TREATMENTS: Spray outside surfaces of screens, window frames, doors, light fixtures and other surfaces where insects are seen congregating. Treat a band of soil measuring 6 to 10 feet wide around and adjacent of structures to create a barrier against ants, cockroaches, crickets, earwigs and scorpions. Treat building foundations to a height of 2 to 3 feet where pests may find entrance.

Where to Apply

Microcare is for use in transportation equipment, food handling and processing plants, campgrounds, food storage areas, homes, hospitals, hotels/motels, kennels, nursing homes, office buildings, picnic areas, residences, restaurants, schools, supermarkets, warehouses and other residential, commercial, industrial establishments.

NyGuard IGR Product Label

NyGuard IGR Material Safety Data Sheet (MSDS)

Product Brochure / Dillution Table

NyGuard IGR Concentrate - 110 ml.

NyGuard IGR Concentrate is new Insect Growth Regulator (IGR) technology which delivers Best in Class IGR Performance. Now you can effectively break the reproductive cycle of your toughest insect pests.

Tips You May Need to Know

NyGuard is the IGR with the broadest spectrum of insects on its label.

NyGuard is over 10 times more active than Gentrol.

NyGuard is effective indoors and outdoors.

NyGuard may be used in food and non-food areas.

For Use in and around: For use in the home and in Food and Non-food areas of Restaurants, Food Processing Plants, Food Warehouses, Grocery Stores and Supermarkets, Schools, Office Buildings, Apartments, Hotels and Motels, Hospitals, Tobacco Plants and Warehouses, Manufacturing Plants, Commercial and Industrial Buildings, Transportation Equipment such as Automobiles, Boxcars, Buses, Boats, Trucks, Railcars, Ship Cargo Holds, and outside on Lawns and Building Perimeters.

How It Works

NyGuard's active ingredient is Pyriproxyfen, an Insect Growth Regulator (IGR), which is a juvenile hormone mimic (JHM). The naturally occurring juvenile hormone regulates and stimulates the developmental process of insects. High concentrations of juvenile hormone stimulate the molting process. The level of juvenile hormone then drops to low levels, which leads to normal maturation of the larvae (larva to pupa, pupa to adult, or nymph to adult molt).

NyGuard interferes with this synchronized balance of hormones during the molting process. Treatment with NyGuard introduces and maintains high concentrations of juvenile hormone mimic at critical points during the insect developmental process. Thus, normal maturation of larvae or nymphs is prevented. The result is the insect stays in an immature stage indefinitely. When this happens the insects with complete metamorphosis will continue to molt from larva to larva until it dies. Insects with incomplete metamorphosis will remain in nymph stage, or have morphological deformation, maturing into sterile, non-reproductive adults.

NyGuard disrupts the normal metamorphosis process of immature insects. Treatment with NyGuard will disrupt the growth, development and reproduction in many insect species in a manner that is environmentally acceptable. The biological results in the target insects are most commonly death or deformity with sterility.

NyGuard does not kill adult insects. For best results, use NyGuard in combination with an insecticide that will kill existing populations of insects. Once the active insect populations have been eliminated, NyGuard will remain to disrupt the maturation of eggs or other immature stages of the insect population.

Petcor Flea Spray Product Label

Petcor Flea Spray Material Safety Data Sheet (MSDS)

Petcor Flea Spray (Dogs & Cats) - 16 oz.

Petcor Flea Spray is a safe, gentle and effective pet care product formulated specially to kill parasites such as fleas, lice and ticks. Petcor employs two efficient methods to treat infected animals and quarters. First, adult pests are killed on contact by Pyrethrins, an organic compound that attacks the nervous systems of insects. Secondly, juvenile pests exposed to the growth regulating spray will not develop into breeding adults, putting an end to reproduction and infestations.

Why Should You Use?

Petcor's formulation is tough on pests but gentle on pets. It can even be used to treat sensitive puppies and kittens.

Directions for Use

Pector is a ready-to-use flea spray for dogs and cats. Cover animal eyes with hand. Ruffle lightly hair coat and spray lightly against the natural lay of the hair. Spray head, chest, ears, neck, middle and hind quarters, legs and finish with the tail. Rub face, around mouth, nose and eyes using a clean cloth. Spray at ticks directly.

When treating puppies or kittens, wrap animals in a cloth treated with Pector. Lightly spray towels for 5 to 10 minutes or lightly spray brush or cotton ball and work through the hair coat. Remove fleas by picking or combing. Repeat treatment every two months. Do not use on animals under 12 weeks of age.

Consult a veterinarian before using this product on injured, pregnant, nursing, or animals on medication. Read the product label before using.

Where to Apply

Pector Flea Spray can be used to treat fleas in dogs and cats over 12 weeks of age.

Petcor Flea Spray Product Label

Petcor Flea Spray Material Safety Data Sheet (MSDS)

Petcor Flea Spray (Dogs & Cats) - 16 oz.

Petcor Flea Spray is a safe, gentle and effective pet care product formulated specially to kill parasites such as fleas, lice and ticks. Petcor employs two efficient methods to treat infected animals and quarters. First, adult pests are killed on contact by Pyrethrins, an organic compound that attacks the nervous systems of insects. Secondly, juvenile pests exposed to the growth regulating spray will not develop into breeding adults, putting an end to reproduction and infestations.

Why Should You Use?

Petcor's formulation is tough on pests but gentle on pets. It can even be used to treat sensitive puppies and kittens.

Directions for Use

Pector is a ready-to-use flea spray for dogs and cats. Cover animal eyes with hand. Ruffle lightly hair coat and spray lightly against the natural lay of the hair. Spray head, chest, ears, neck, middle and hind quarters, legs and finish with the tail. Rub face, around mouth, nose and eyes using a clean cloth. Spray at ticks directly.

When treating puppies or kittens, wrap animals in a cloth treated with Pector. Lightly spray towels for 5 to 10 minutes or lightly spray brush or cotton ball and work through the hair coat. Remove fleas by picking or combing. Repeat treatment every two months. Do not use on animals under 12 weeks of age.

Consult a veterinarian before using this product on injured, pregnant, nursing, or animals on medication. Read the product label before using.

Where to Apply

Pector Flea Spray can be used to treat fleas in dogs and cats over 12 weeks of age.

Precor Plus Fogger Product Label

Precor Plus Fogger Material Safety Data Sheet (MSDS)

Precor Plus Fogger (aka Flea Bomb) - 6 oz.

Precor Plus Fogger is a new delivery system designed to eliminate fleas in enclosed areas. Like Precor 2000 Plus, it contains Precor Insect Growth Regulator and an adulticide for complete control of fleas. Once activated, the fogger releases an insect-killing fog that penetrates deep into hard-to-reach areas where fleas live, hide and breed. Precor makes treatment easier and more effective with its advanced formulation and unique active ingredient delivery.

Why Should You Use?

Precor Fogger can treat hard-to-reach areas and makes treatments faster and easier.

Directions for Use

Do not use in non-enclosed areas of food/feed or non-food/feed processing and handling establishments. When treating inside homes, cover all food processing/handling surfaces and utensils before treatments and wash before using. Prepare treatment areas by vacuuming. Remove pets and cover aquariums. Remove or cover exposed food, food preparation surfaces, utensils and dishes. Open cabinets, and inside doors to ensure unobstructed flow of mist. Turn off all ignition sources such as running electrical appliances, open flames and pilot lights.

Each container treats 6,000 cubic feet of space. Do not use more than one fogger per room. Do not use the product in small enclosed spaces such as closets, cabinets or rooms smaller than 6,000 cu. ft. Place the fogger in an elevated area at the center of the room and cover the floor surrounding release area with newspaper. Point the can and the actuator away from face before activating. Press the actuator tab until it snaps into place to release the fog. Leave treated room or house immediately after activating the fogger. Keep the treatment area closed for at least 2 hours. Ventilate treated area for at least an hour before occupying.

Where to Apply

Precor Plus Fogger is designed for use in enclosed food/feed and non-food/feed areas of residential, commercial and industrial buildings.

Precor Plus Fogger Product Label

Precor Plus Fogger Material Safety Data Sheet (MSDS)

Precor Plus Fogger (aka Flea Bomb) - 6 oz.

Precor Plus Fogger is a new delivery system designed to eliminate fleas in enclosed areas. Like Precor 2000 Plus, it contains Precor Insect Growth Regulator and an adulticide for complete control of fleas. Once activated, the fogger releases an insect-killing fog that penetrates deep into hard-to-reach areas where fleas live, hide and breed. Precor makes treatment easier and more effective with its advanced formulation and unique active ingredient delivery.

Why Should You Use?

Precor Fogger can treat hard-to-reach areas and makes treatments faster and easier.

Directions for Use

Do not use in non-enclosed areas of food/feed or non-food/feed processing and handling establishments. When treating inside homes, cover all food processing/handling surfaces and utensils before treatments and wash before using. Prepare treatment areas by vacuuming. Remove pets and cover aquariums. Remove or cover exposed food, food preparation surfaces, utensils and dishes. Open cabinets, and inside doors to ensure unobstructed flow of mist. Turn off all ignition sources such as running electrical appliances, open flames and pilot lights.

Each container treats 6,000 cubic feet of space. Do not use more than one fogger per room. Do not use the product in small enclosed spaces such as closets, cabinets or rooms smaller than 6,000 cu. ft. Place the fogger in an elevated area at the center of the room and cover the floor surrounding release area with newspaper. Point the can and the actuator away from face before activating. Press the actuator tab until it snaps into place to release the fog. Leave treated room or house immediately after activating the fogger. Keep the treatment area closed for at least 2 hours. Ventilate treated area for at least an hour before occupying.

Where to Apply

Precor Plus Fogger is designed for use in enclosed food/feed and non-food/feed areas of residential, commercial and industrial buildings.

Pro Citra DL Product Label

Pro Citra DL Material Safety Data Sheet (MSDS)

Pro Citra DL Botanical Insectcide (Orange Oil) - 17.5 oz.

From Whitmire Micro-Gen's line of all natural insecticides, Pro Citra contact kill aerosol offers the same performance as synthetic insecticides without the toxicity. This natural, broad label product targets several common household insects such as ants, roaches and termites. Its active ingredient is d-Limonene, a botanical insecticide with very low toxicity to humans. This makes the product ideal for use in sensitive accounts such as schools, nursing homes and hospitals.

Why Should You Use?

Pro Citra does not contain synthetic active ingredients that are usually toxic.

ProCitra-DL is a botanical-based insecticide ideal for Crack and Crevice and spot treatment in both food and nonfood handling areas. It controls a wide variety of pests including ants, cockroaches, fleas and spiders and may be used in sensitive accounts such as schools, nursing homes, food processing plants, hospitals and government buildings.

Directions for Use

Pro Citra-DL is intended for crack and crevice and/or spot treatments only in food and non-food handling areas. Use this product with the supplied actuator and injection tubes. Place injector tip into cracks, crevices and voids where insects typically hide. Move injector tip along small openings at the rate of 3 linear feet per second for light infestations and one linear foot per second for heavy infestations. Treat close voids at the rate of one to five seconds per three cubic feet. For spot treatments, hold the container upright and direct the nozzle 12 inches from the surfaces. Treat areas under sinks, around pipes, refrigerators, stoves, washing machines, areas around cabinets, baseboards, floor drains, utility boxes and other infested sites. Contact insects as much as possible. Reapply as necessary. Read the product label for more information.

Where to Apply

Pro Citra Botanical Insecticide is for indoor use in apartments, homes, hotels, hospitals, nursing homes, schools, day care centers, food storage areas, restaurants, food processing plants, supermarkets, utilities, warehouses, modes of transport (buses, trains, trucks, ships), and other commercial, institutional and industrial buildings.

Pro Citra DL Product Label

Pro Citra DL Material Safety Data Sheet (MSDS)

Pro Citra DL Botanical Insectcide (Orange Oil) - 17.5 oz.

From Whitmire Micro-Gen's line of all natural insecticides, Pro Citra contact kill aerosol offers the same performance as synthetic insecticides without the toxicity. This natural, broad label product targets several common household insects such as ants, roaches and termites. Its active ingredient is d-Limonene, a botanical insecticide with very low toxicity to humans. This makes the product ideal for use in sensitive accounts such as schools, nursing homes and hospitals.

Why Should You Use?

Pro Citra does not contain synthetic active ingredients that are usually toxic.

ProCitra-DL is a botanical-based insecticide ideal for Crack and Crevice and spot treatment in both food and nonfood handling areas. It controls a wide variety of pests including ants, cockroaches, fleas and spiders and may be used in sensitive accounts such as schools, nursing homes, food processing plants, hospitals and government buildings.

Directions for Use

Pro Citra-DL is intended for crack and crevice and/or spot treatments only in food and non-food handling areas. Use this product with the supplied actuator and injection tubes. Place injector tip into cracks, crevices and voids where insects typically hide. Move injector tip along small openings at the rate of 3 linear feet per second for light infestations and one linear foot per second for heavy infestations. Treat close voids at the rate of one to five seconds per three cubic feet. For spot treatments, hold the container upright and direct the nozzle 12 inches from the surfaces. Treat areas under sinks, around pipes, refrigerators, stoves, washing machines, areas around cabinets, baseboards, floor drains, utility boxes and other infested sites. Contact insects as much as possible. Reapply as necessary. Read the product label for more information.

Where to Apply

Pro Citra Botanical Insecticide is for indoor use in apartments, homes, hotels, hospitals, nursing homes, schools, day care centers, food storage areas, restaurants, food processing plants, supermarkets, utilities, warehouses, modes of transport (buses, trains, trucks, ships), and other commercial, institutional and industrial buildings.

Speckoz Evercide Esfenvalerate EC Product Label

Speckoz Evercide Esfenvalerate EC MSDS

Speckoz Evercide Esfenvalerate EC - 16 oz.

Speckoz Evercide features Esfenvalerate, a synthetic pyrethroid insecticide less toxic and more potent than other pyrethroids. Flexible and highly effective, Speckoz can be diluted in oil or in water, offering the superior residual performance regardless of the diluent. Due to its low toxicity and application rates, the product is labeled for use in food and non-food areas of commercial and industrial structures.

Why Should You Use?

Speckoz Evercide EC can be used in food handling areas. Speckoz can be diluted in water or in oil for extended residual control.

Directions for Use

Depending on the target pest, mix one or two ounces of Speckoz per gallon of water/ oil to produce a solution containing 0.027% and 0.05% active ingredient. Apply as a coarse, wet spray at the rate of 1 gallon per 1,000 square feet of surface area. Insect growth regulators or pyrethroid insecticides may be tank mixed with the product unless prohibited by the product label/s. Do NOT tank mix products with dichlorvos (DDVP).

Treat surfaces where insects are normally found, in baseboards, cabinets and shelves, underneath sinks and equipment, in floors and walls, floor drains, door and window frames, garbage cans, utility installations and other harborage sites. Pay particular attention to cracks, crevices and voids in walls and floors. If necessary drill holes in damaged wooden structures to kill wood destroying insects. Treat outdoor surfaces at the rate of 1 gallon of mixture per 1,000 square feet.

Speckoz may be used as a space spray at the maximum dilution rate of 10 ounces of concentrate per gallon of oil. Apply using mechanical foggers capable of producing aerosol particles less than 30 microns. Before treatment, close all doors and windows in treatment area. Shut off air conditioning units and ventilating systems before proceeding. Direct spray into cracks and crevices, under and behind equipment and appliances, or dark harborage areas before commencing the space treatment. Direct the spray upwards towards the ceiling and corners at the rate of 1 ounce per 1,000 cubic feet of space. Evacuate the treated area and keep the area closed for 30 minutes. Ventilate before occupying.

Where to Apply

Speckoz is for use in food and non-food areas of homes, apartments, schools, warehouses, office buildings, hotels, motels, kennels, food processing and manufacturing plants, food service establishments and transportation equipment.

Speckoz Evercide Total Release Aerosol Product Label

Speckoz Evercide Total Release Aerosol MSDS

Speckoz Evercide Total Release Aerosol

The trusted performance of Speckoz Evercide is now available in aerosol. With the addition of Pyrethrins and PBO, this ready-to-use product packs a more powerful punch than the Speckoz concentrate. Designed primarily for space treatments, Speckoz Aerosol delivers quick knockdown action and residual control. With convenient packaging, there's no need for mixing or fogging equipment, and treatment can be done in just an hour.

Why Should You Use?

Speckoz penetrates deep into cracks, crevices, voids and other hard-to-reach areas to kill hiding insects.

Directions for Use

Shake well before use. Do NOT apply when food processing facility is in operation. Cover or remove food and food processing equipment before treating food handling areas. Do NOT use the product in small enclosed spaces such as cabinets, closets or in rooms measuring 5 feet x 5 feet or smaller.

Turn off all pilot lights, electrical appliances, air conditioners, venting equipment and other sources of ignition. Open all cabinets, closets and doors to allow fog to enter. Close doors and windows. Place the fogger on top of a table at the center of the room. Cover the release area with newspaper. Point valve away from face and lock the valve in open position. Press the valve down, hooking it to the catch. Evacuate the treatment area immediately after activating the fogger. Keep the area closed for half an hour before ventilating. Ventilate the treated area for 30 minutes before occupying. Repeat treatment every two weeks.

Where to Apply

Speckoz Evercide Aerosol is for use in food and non-food areas of homes, garages, warehouses, hospitals, industrial buildings, schools, office buildings, hotels, motels, kennels, food processing/manufacturing/handling plants and establishments.

Product Label

Material Safety Data Sheet (MSDS)

Suspend SC Brochure

Suspend SC - 1 Pint

Suspend SC provides effective knockdown and long term residual control of over fifty pests. Very low usage rates makes the product safe to use in food handling areas, mattresses, furniture, cushions and other surfaces where sensitivity is an issue. Suspend SC residues have no odor or visible residues and will not damage surfaces where water alone causes no damage.

Why Should You Use?

Suspend is more economical, flexible and effective compared to other concentrates.

Directions for Use

Mix Suspend with water following the dilution rates in the product label. Active ingredient concentration in solutions range from 0.01% to 0.06%, depending on the target pest/s. Apply using hand pressurized or power operated sprayers. Shake well before using. Partially fill applicator tanks 1/2 full with water before adding the proper amount of concentrate. Agitate the tank and add the remaining volume of water. Re-agitate to obtain a uniform mixture. The product may be tank mixed with currently registered pesticides and insect growth regulators unless prohibited by the product label. Solutions can be converted to foam used in treating structural voids. Mix Suspend SC with a foaming agent following the mixing instructions as indicated in the foaming agent label.

Use finished solutions for crack and crevice, spot and surface treatments indoors. Use 0.25 to 1.5 ounces of Suspend per gallon of water to treat 1,000 square feet of surface. Apply as a coarse low pressure spray to cracks, crevices, voids and other sites where insect live, feed and breed. Apply as directed in the product label.

Use Suspend SC as a residual or broadcast spray to perimeters, lawns, grounds, landscapes and ornamental plants. Apply as a coarse, low-pressure spray to outdoor building surfaces, porches, patios, eaves, screens, window frames, garbage dumps, lawns and ornamental plants. Treat a band of soil 6 to 10 feet wide around and adjacent to buildings and structures. Treat foundations up to a height of 3 feet.

Control wood-damaging insects by applying spray or foam solutions having 0.06% Deltamethrin. Using the appropriate application equipment, apply solutions to infested surfaces and damaged wooden structures. Inject solutions inside termite carton nests and damaged wood. Drill holes if necessary. Apply as a coarse fan spray to exposed insects and infested surfaces.

For broadcast application in lawns, apply using a minimum of 2 gallons per 1,000 square feet. Use higher volumes for adequate coverage of thick foliage. Apply thoroughly and uniformly over turfgrass and ornamentals.

Where to Apply

Suspend SC is for residential, commercial, industrial and institutional control of the listed pests. Areas of use include apartments, bakeries, bottling facilities, breweries, cafeterias, canneries, food manufacturing and processing plants, food service establishments, granaries, hospitals, hotels, kitchens, laboratories, nursing homes, office buildings, restaurants, schools, warehouses and transports such as aircraft, buses, mobile homes, ships, trailers and trucks.

Product Label

Material Safety Data Sheet (MSDS)

Talstar EZ Granular Insecticide - 25 lbs.

Talstar EZ Granular Insecticide uses a method contact kill method to get rid of pests. The same formula as the Talstar PL, Talstar EZ Granular has bigger granular to make spreading easier. Talstar EZ can be used in residential and recreational areas/ fields, parks and around industrial buildings. To make the spreading easier we recommend that you use a type of handle spreader to get an even spread. Also Talstar EZ work better when the product is wet so watering the area after the product has been spread is a good idea. Talstar EZ Granular does not dissolve in water but it will allow it to go into the ground preventing the pest to come near home entrances or surroundings.

Useful Tips You Should Know:

Product disappears and disperse when wet.

Will not leave stain or residue on concrete.

Safe to use around plants.

Talstar EZ comes in a resealable bag to keep freshness.

For Use in and around: Lawns, Perimeters

Talstar EZ Granular Description:

The power of Talstar in a convenient granular formulation. Talstar EZ granular features a grain technology that allows the particles to disperse and disappear upon wetting without staining concrete or damaging plants. This formulation is easy on the applicator, easy to calibrate and easy to spread. And, Talstar EZ won't leach out of the top-treated zone, meaning longer residual and better insect control.

Put an end to fire ant colonies fast. The Talstar EZ granular program is proven to eliminate dangerous fire ant invaders within 24 hours, allowing you to give customers their yard back when they want it. For quick and reliable colony control and long-term protection against reinfestation of invading fire ants, combine treatment with an application of Talstar Professional insecticide.

LAWN AND PERIMETER APPLICATIONS

Lawn Application: Broadcast Talstar EZ granular insecticide with suitable application equipment to ensure uniform coverage over the treatment area.

Product Label

Material Safety Data Sheet (MSDS)

Talstar EZ Granular Insecticide - 25 lbs.

Talstar EZ Granular Insecticide uses a method contact kill method to get rid of pests. The same formula as the Talstar PL, Talstar EZ Granular has bigger granular to make spreading easier. Talstar EZ can be used in residential and recreational areas/ fields, parks and around industrial buildings. To make the spreading easier we recommend that you use a type of handle spreader to get an even spread. Also Talstar EZ work better when the product is wet so watering the area after the product has been spread is a good idea. Talstar EZ Granular does not dissolve in water but it will allow it to go into the ground preventing the pest to come near home entrances or surroundings.

Useful Tips You Should Know:

Product disappears and disperse when wet.

Will not leave stain or residue on concrete.

Safe to use around plants.

Talstar EZ comes in a resealable bag to keep freshness.

For Use in and around: Lawns, Perimeters

Talstar EZ Granular Description:

The power of Talstar in a convenient granular formulation. Talstar EZ granular features a grain technology that allows the particles to disperse and disappear upon wetting without staining concrete or damaging plants. This formulation is easy on the applicator, easy to calibrate and easy to spread. And, Talstar EZ won't leach out of the top-treated zone, meaning longer residual and better insect control.

Put an end to fire ant colonies fast. The Talstar EZ granular program is proven to eliminate dangerous fire ant invaders within 24 hours, allowing you to give customers their yard back when they want it. For quick and reliable colony control and long-term protection against reinfestation of invading fire ants, combine treatment with an application of Talstar Professional insecticide.

LAWN AND PERIMETER APPLICATIONS

Lawn Application: Broadcast Talstar EZ granular insecticide with suitable application equipment to ensure uniform coverage over the treatment area.

Talstar PL Granular Product Label

Talstar PL Granular Material Safety Data Sheet (MSDS)

Talstar PL Granular Insecticide - 25 lbs.

Talstar PL Granular is different from Talstar EZ it has an unique sand core granular structure. It is a lot finer then the EZ. Talstar PL release its chemical through out time as it rains. Talstar PL can be used to treat not only residential but commercial and recreation centers as well. Once the Talstar PL is inside soil it will protect by killing the pest as well as preventing pest problems. For lawn areas the application of the Talstar PL can last 2- 3 mos. One recommendation is to use a form of handle spreader to evenly spread the granular.

Useful Tips You Should Know: Do not exceed 0.2lb of Talstar PL per acre in residential use, and 0.4lb of Talstar PL per acre in commercial use.

Avoid using in commercial greenhouses or areas where grass is grown for seeds. Safe around non targeted animals.

General Information of Talstar PL Granular Insecticide Talstar PL granular has a sand core granular structure that penetrates mulch with no odor and no watering needed. It's heavy and dust-free so it won't drift off target. And it remains on the soil surface so it's effective even after irrigation or rainfall. Labeled for a broad spectrum of perimeter pests, Talstar PL granular controls everything from fleas, ticks and flies to mosquitoes, mites and millipedes. Talstar PL granular provides two to four months of effective, long-term residual protection. Low application rates make it an excellent, cost-effective choice for building and foundation perimeters. Put an end to fire ant colonies fast. The Talstar PL granular program is proven to eliminate dangerous fire ant invaders within 24 hours. For quick and reliable colony control and long-term protection against reinfestation of invading fire ants, combine a mound treatment with a broadcast application of Talstar PL granular.

To ensure optimum control, irrigate the treated area with up to 0.1 inches of water immediately after application to activate (release from the granule) the insecticide.

Talstar PL Granular Product Label

Talstar PL Granular Material Safety Data Sheet (MSDS)

Talstar PL Granular Insecticide - 25 lbs.

Talstar PL Granular is different from Talstar EZ it has an unique sand core granular structure. It is a lot finer then the EZ. Talstar PL release its chemical through out time as it rains. Talstar PL can be used to treat not only residential but commercial and recreation centers as well. Once the Talstar PL is inside soil it will protect by killing the pest as well as preventing pest problems. For lawn areas the application of the Talstar PL can last 2- 3 mos. One recommendation is to use a form of handle spreader to evenly spread the granular.

Useful Tips You Should Know: Do not exceed 0.2lb of Talstar PL per acre in residential use, and 0.4lb of Talstar PL per acre in commercial use.

Avoid using in commercial greenhouses or areas where grass is grown for seeds. Safe around non targeted animals.

General Information of Talstar PL Granular Insecticide Talstar PL granular has a sand core granular structure that penetrates mulch with no odor and no watering needed. It's heavy and dust-free so it won't drift off target. And it remains on the soil surface so it's effective even after irrigation or rainfall. Labeled for a broad spectrum of perimeter pests, Talstar PL granular controls everything from fleas, ticks and flies to mosquitoes, mites and millipedes. Talstar PL granular provides two to four months of effective, long-term residual protection. Low application rates make it an excellent, cost-effective choice for building and foundation perimeters. Put an end to fire ant colonies fast. The Talstar PL granular program is proven to eliminate dangerous fire ant invaders within 24 hours. For quick and reliable colony control and long-term protection against reinfestation of invading fire ants, combine a mound treatment with a broadcast application of Talstar PL granular.

To ensure optimum control, irrigate the treated area with up to 0.1 inches of water immediately after application to activate (release from the granule) the insecticide.

Tempo SC Ultra Product Label

Tempo SC Ultra Material Safety Data Sheet (MSDS)

Tempo SC Ultra - 8 oz.

Tempo SC Ultra is an odor less and stainless product. Tempo SC is concentrated formula that is mixed with water before using. Tempo SC Ultra is used both indoors and outdoors. One bottle of Tempo Ultra makes up to 30 gallons. When using this product we recommend that you use a pest control product tool such as Chapin Premier 1 or 2 Gallon sprayer.

Application with Tempo SC Ultra

Apply where pests have been seen or found, or can find shelter (in and around buildings and structures, on residental, commercial and recreational areas of turf, on ornamentals in landscapes and interior plantscapes). Makes up to 30 gallons of finished spay solution for indoors. Treats up to 30,000 sq ft. outdoors. Mix the appropriate amount of Tempo SC with water. May tank mix with other pesticides currently registered for similar uses. Reapply every 7 to 10 days, if needed. For turf, reapply if needed, but not more than 6 times per year.

Product Label

Material Safety Data Sheet (MSDS)

Tempo Ultra WP - 420 grams

Tempo Ultra WP has a fast knockdown kill, meaning the minute they come in contact with the insecticide they will die. Tempo Ultra WP will leave no to almost no residue when sprayed and odorless. Tempo Ultra WP will last up to 30 days, continuously killing pests. Tempo Ultra WP can be used indoors and outdoors as well as food handling facilities.

General Household Pests: Ants (except Pharaoh), Bedbugs, Carpet Beetles, Centipedes, Clothes moths, cluster fly, Cockroaches, Crickets, Darling beetles, Earwigs, Firebrats, Millipedes, Pillbugs, Silverfish, Sowbugs, Spiders, Flies, Gnats, Hornets, Midges, Moths, Wasps, Yellow Jackets

FOR USE IN:

Areas where pest have been seen or found, or can find shelter. In and around buildings and structures. One residential, commercial and recreational areas if turf. On ornamentals in landscapes and interior plant scapes.

Mixing Direction for Tempo Ultra WP:

Mix the appropriate amount of Tempo Ultra WP with water. May use tank mix with other pesticides currently registered for similar uses, unless specifically prohibited. Use in general surface spot, mist, or crack and Crevice application. Re-apply every 7 to 10 days, in needed. Make sure to cover or remove all food processing and handling equipment before treatment.

Temprid SC Product Label

Temprid SC Material Safety Data Sheet (MSDS)

Temprid SC Supplemental Lable

Temprid SC Insecticide - 400ml

Temprid SC (Suspension Concentrate Formulation) insecticide is an easy-to-use and provides quick knockdown and long residual control of more than 50 pests by combining the broad spectrum, fast-acting control of beta-cyfluthrin with the systemic residual control of imidacloprid to provide premium performance and effecacy.

Tempirid SC's Advantages:

Delivers unsurpassed ant control.
Also eliminates aphids, scale and mealy bugs that produce honeydew, a preferred food source of many ant species.
The only perimeter pest control product you will ever need
Broad spectrum insecticide - controls perimeter pests that some competitive products don't.
Flexible label.
Can be applied outdoors and indoors.
Can be applied as a perimeter application 3 ft up and 10 ft out from the structure.
Better pest stopping power than non-repellents.

Temprid SC Product Label

Temprid SC Material Safety Data Sheet (MSDS)

Temprid SC Supplemental Lable

Temprid SC Insecticide - 400ml

Temprid SC (Suspension Concentrate Formulation) insecticide is an easy-to-use and provides quick knockdown and long residual control of more than 50 pests by combining the broad spectrum, fast-acting control of beta-cyfluthrin with the systemic residual control of imidacloprid to provide premium performance and effecacy.

Tempirid SC's Advantages:

Delivers unsurpassed ant control.
Also eliminates aphids, scale and mealy bugs that produce honeydew, a preferred food source of many ant species.
The only perimeter pest control product you will ever need
Broad spectrum insecticide - controls perimeter pests that some competitive products don't.
Flexible label.
Can be applied outdoors and indoors.
Can be applied as a perimeter application 3 ft up and 10 ft out from the structure.
Better pest stopping power than non-repellents.

Product Label

Material Safety Data Sheet

Tengard SFR One - 1 Quart

Tengard SFR One's active ingredient has the ability to kill over 75 different types of pest. The permethrin in Tengard SFR One has a long lasting and increases effective. Tengard SFR One can be used indoors and outdoors, when used outdoors it dispersed in the soil and establish a barrier between the structure and the termites in the soil. Tengard SFR One is a pesticide that kill pest but also as a prevention.

Mix the termiticide use dilution in the following manner:

1. Fill tank 1/4 to 1/3 full.
2. Start pump to begin by-pass agitation and place end of treating tool in tank to allow circulation through hose.
3. Add appropriate amount of Tengard SFR. (See Rate/Volume Conversion Chart)
4. Add remaining amount of water.

Application Volume: To provide maximum control and protection against termite infestation apply the specified volume of the finished water emulsion and active ingredient as set forth in the directions for use section of this label. If soil will not accept the labeled application volume, the volume may be reduced provided there is a corresponding increase in concentration so that the amount of active ingredient applied to the soil remains the same.

NOTE: Large reductions of application volume reduce the ability to obtain a continuous barrier. Variance is allowed when volume and concentration are consistent with label directed rates and a continuous barrier can still be achieved.

Ultracide Product Label

Ultracide Material Safety Data Sheet

Ultracide Aerosol - 20 oz.

Ultracide is one of the pest control products that can be used all year long. Ultracide's main target is fleas, since most fleas live inside either on animals or in furnishings etc, its important to treat them right away. Ultracide can be used in any area or place, if you are worried about discolor or stain please per test before treating the areas.

FOR USE IN AND AROUND:

Apartments, Automobiles, Homes, Hospitals, Hotels, Kennels, Motels, Offices, Schools, Supermarkets, Transportation Equipment (Buses, Boats, Ships, Trains, Trucks), Warehouses, Utilities, Veterinary Clinics and Other Commercial and Industrial Buildings.

PT ULTRACIDE kills fleas and prevents flea infestations for a full season. Adult fleas may be seen in the treated areas when brought in on infested animals or when adults emerge from pupal cases; however, a population will not develop in the treated area. In transportation equipment, certain plastics may be whitened or dulled. Apply only to carpets and cloth upholstered areas, or test an inconspicuous area before treating.

Ultracide Product Label

Ultracide Material Safety Data Sheet

Ultracide Aerosol - 20 oz.

Ultracide is one of the pest control products that can be used all year long. Ultracide's main target is fleas, since most fleas live inside either on animals or in furnishings etc, its important to treat them right away. Ultracide can be used in any area or place, if you are worried about discolor or stain please per test before treating the areas.

FOR USE IN AND AROUND:

Apartments, Automobiles, Homes, Hospitals, Hotels, Kennels, Motels, Offices, Schools, Supermarkets, Transportation Equipment (Buses, Boats, Ships, Trains, Trucks), Warehouses, Utilities, Veterinary Clinics and Other Commercial and Industrial Buildings.

PT ULTRACIDE kills fleas and prevents flea infestations for a full season. Adult fleas may be seen in the treated areas when brought in on infested animals or when adults emerge from pupal cases; however, a population will not develop in the treated area. In transportation equipment, certain plastics may be whitened or dulled. Apply only to carpets and cloth upholstered areas, or test an inconspicuous area before treating.

Product Label

Material Safety Data Sheet (MSDS)

Evercide Total Release Fogger (or V clean-out )

Speckoz Evercide Total Release Fogger (or V clean-out ) is mainly used in residential areas. The larger the area it is recommended you use more. For bad pest problems it is recommended to use the V Clean Out Fogger due to the fact that the pesticide come out in a fog like bombs and can travel through vents and inside walls to treat even the infested areas not shown to the eye. Please note to evacuate the facilitie while Evercide Total Release Fogger (or V clean-out ) is active for at least 3 hours.

FOR USE IN AND AROUND: Apartments, Cabins, Campers, Closed Porches, Condominiums, Dormitories, Garages, Homes, Kennels, and the Non-Food/Feed areas of Drive-ins, Drugstores, Factories, Food Plants, Hospitals, Hotels, Kitchens, Nursing Homes, Office Buildings, Railroad Cars, Rest Rooms, Schools, Ships, Storage Areas, Supermarkets, Theaters, Trailers, Trucks, Warehouses, and Zoos.

DO NOT use in small, enclosed spaces such as closets, cabinets or under counters or tables.

Do not use in a room 5 ft. X 5 ft. or smaller; instead allow fog to enter from other rooms.

Turn off ALL ignition sources such as pilot lights (shut off gas valves), other open flames or running electrical appliances that cycle off and on. (i.e. refrigerators, thermostats, etc.) Call your gas utility or management company if you need assistance with your pilot lights.

Cover exposed foods, dishes and food handling equipment. Open cabinets and doors to area to be treated.

Shut off fans and air conditioners. Close doors and windows.

Point valve opening away from face and eyes when releasing.

Use one unit for each 6,000 cubic feet of unobstructed area.

Do not remain in area during treatment and ventilate thoroughly before re-entry.

Do not use this unit in a cabinet or under counter or table. Do not use this unit in an area less than 100 cubic feet.

To Operate Valve: Place several layers of newspaper or pad on stand or table in the center of the room. To lock valve in open position for automatic discharge, press valve button all the way down, hooking catch. Then place fogger on the stand or table. Leave building at once and keep building closed for two hours before airing out. Open all doors and windows and allow to air for one-half hour. Repeat spraying in two weeks or when necessary.

To Kill Fleas and Ticks: Destroy pet's old bedding and replace. Use product as above. Treat dogs and cats with a registered tick control product prior to re-entry.

CY-Kick Aerosol Product Label

CY-Kick Aerosol Material Safety Data Sheet (MSDS)

CY-Kick Aerosol - 17.5 oz.

CY-Kick Aerosol is a residual insecticide that kills pests instantly. CY-Kick aerosol is used for cracks and crevices, spot, and void treatments. CY-Kick residual aerosol, with Cy-Kick CS's unique microcapsule suspention technology, leaves a flim on a surface applied as a residual to keep on killing pests for weeks. Since with Cy-Kick's low odor fomula, it is one of the best and perfect products for residential, food handling, and sensitive areas of indoor treatment.

Advantages of Cy-Kick Aerosol

Excellent knockdown and residual properties
Broad spectrum activity
Ideal for use in both residential and commercial accounts
Great for wood injection

Indoor Treatments with CY-Kick Aerosol:

Apply as a Crack and Crevice treatment using the prescribed dosage into cracks, crevices, and void spaces where insects may be harboring. These may include, but are not limited to, openings aroind pipes and sinks, under refrigerators, behind baseboards, washing machines, stoves, cabinets, sewers, floor drains, and meter boxes. Spot treatment may also be made to areas including, but not limited to: storage areas, closets, around water pipes, doors and windows, around refrigerators, cabinets, sinks, stoves and other equipment, shelves, drawers, and similar areas.

Apply as a Crack and Crevice treatment or spot treatment into infested and egg laying sites near pet resting areas including, but not limited to: cracks and crevices of baseboards and around door and window frames.

Apply as a Crack and Crevice treatment into cracks, crevices, and voids where ants may be traveling and/or harboring, including, but not limited to, around doors, window frames, wall voids adn other structural cracks and crevices. Spot treatment may also be made to areas including, but not limited to: storage areas, closets, around refrigerators, cabinets, sinks, stoves and other equipment, shelves, drawers, and similar areas.

Apply as a Crack and Crevice treatment into cracks and crevices of baseboards, door frames, bookcases and other harborage sites. Spot Treatment may also be made to areas including, but not limited to: storage areas, closets, around water pipes, doors and windows, around refrigerators, cabinets, sinks, stoves and other equipment, shelves, drawers and similar areas.

Apply as a Crack and Crevice treatment into cracks, crevices and/or voids where these areas may include, but not limited to: cracks and crevices in cabinets and pantries, wall voids, around window and door frames, under siding and in machinery. Spot treatment may also be made to areas including but not limited to: storage areas, closets, around water pipes, doors and windows, around refrigerators, cabinets, sinks, stoves and other equipment; shelves, drawers and similar areas.

Bifen IT Product Label /

Bifen IT Material Safety Data Sheet (MSDS)

Bifen IT - 1 Quart

Bifen I/T (Insecticide/Termiticide) is one of the most potent insecticides in the market. With 7.9% Bifenthrin, the product is highly effective in controlling a wide variety of pest insects, including various species of subterranean termites. Bifen I/T is specially formulated to control termite and insect infestations around commercial, residential and industrial structures.

Why Should You Use BIFEN I/T ?

Bifen I/T contains high concentrations of Bifenthrin to control and prevent termite and insect infestations. In addition, the product leaves a long-lasting residual effect that last for months.

Directions for Bifen IT Use

Applying Bifen I/T requires the use of suitable application equipment and personal protective equipment. The product is extremely toxic. Please refer to the product label before using or handling the product. Please read the product label for information on treatments, dilutions and application methods. Depending on the target pest and the method of application, Bifen I/T should be applied using the correct methods as stated in the product label. The product can be used for broadcast treatments, perimeter treatments, crack and crevice applications, sub-slab injections and residual barrier treatments. For subterranean termite control, methods may be employed such as trenching, rodding, crack and crevice injection or absorption for effective control.

Bifen I/T can also be used to control Armyworms, Cutworms, Sod Webworms, Annual Bluegrass Weevils, Billbugs, Black Turfgrass Ataenius, Leafhoppers, Mealybugs, Ants, Centipedes, Chinch Bugs, Fleas , Imported Fire Ants, Millipedes, Mole Crickets, Ticks, Pillbugs, Sowbugs and European Crane Flies. Please read the product label for directions and mixing instructions.

Where to Apply Bifen IT

Use Bifen I/T to treat infested areas in and around residential, commercial, public and industrial buildings. The product is for use in lawns, parks, recreational areas and athletic fields.

Precor 2000 Product Label

Precor 2000 Material Safety Data Sheet (MSDS)

Precor 2000 Plus - 16 oz.

Zoecon's Precor 2000 Plus Premise Spray contains Precor Insect Growth Regulator, Permethrin and Phenothrin. Precor's unique combination of adulticides and insect growth regulator kills adult insects and disrupt the development of juvenile pests. Eggs and larvae exposed to Precor IGR are unable to develop into breeding adults, effectively halting infestations. Properly applied, Precor penetrates deep into fibers, preventing reinfestations for seven months.

Why Should You Use?

Precor guarantees total control of fleas, ticks, ant and cockroaches by killing off adults and preventing immature insects from developing into biting, reproductive adults.

Directions for Use

Shake well before using. Identify areas where pets frequent such as resting and sleeping areas. Precor may be used to treat infested motor vehicles. Thoroughly vacuum surrounding area and cover exposed food processing surfaces and utensils. Seal and dispose of used vacuum bags properly to prevent reinfestation. Remove pets from the treatment area and cover/remove exposed food. Check for staining before using this product on any surface. Spray in an inconspicuous parts of fabrics and surfaces. Hold the can upright, push down the button and spray approximately 2 to 3 feet from a surface. Apply lightly and uniformly to surfaces. Treat surfaces until they are slightly damp. Do not over-treat. Reapply every two weeks if necessary. Vacate room after treatment and ventilate before reoccupying. Consult the product label for more details.

Where to Apply

Use Precor 2000 Plus to treat ant, roach, flea and tick infestations in homes, garages, kennels, carpets, rugs, drapery, furniture and cushions, pet sleeping and bedding areas, in hospitals, hotels, motels, offices, schools, supermarkets, transportation equipment (buses, ships, trains, trucks), and other residential, commercial and industrial buildings.

Precor 2000 Product Label

Precor 2000 Material Safety Data Sheet (MSDS)

Precor 2000 Plus - 16 oz.

Zoecon's Precor 2000 Plus Premise Spray contains Precor Insect Growth Regulator, Permethrin and Phenothrin. Precor's unique combination of adulticides and insect growth regulator kills adult insects and disrupt the development of juvenile pests. Eggs and larvae exposed to Precor IGR are unable to develop into breeding adults, effectively halting infestations. Properly applied, Precor penetrates deep into fibers, preventing reinfestations for seven months.

Why Should You Use?

Precor guarantees total control of fleas, ticks, ant and cockroaches by killing off adults and preventing immature insects from developing into biting, reproductive adults.

Directions for Use

Shake well before using. Identify areas where pets frequent such as resting and sleeping areas. Precor may be used to treat infested motor vehicles. Thoroughly vacuum surrounding area and cover exposed food processing surfaces and utensils. Seal and dispose of used vacuum bags properly to prevent reinfestation. Remove pets from the treatment area and cover/remove exposed food. Check for staining before using this product on any surface. Spray in an inconspicuous parts of fabrics and surfaces. Hold the can upright, push down the button and spray approximately 2 to 3 feet from a surface. Apply lightly and uniformly to surfaces. Treat surfaces until they are slightly damp. Do not over-treat. Reapply every two weeks if necessary. Vacate room after treatment and ventilate before reoccupying. Consult the product label for more details.

Where to Apply

Use Precor 2000 Plus to treat ant, roach, flea and tick infestations in homes, garages, kennels, carpets, rugs, drapery, furniture and cushions, pet sleeping and bedding areas, in hospitals, hotels, motels, offices, schools, supermarkets, transportation equipment (buses, ships, trains, trucks), and other residential, commercial and industrial buildings.

Demon WP Product Label

Demon WP Material Safety Data Sheet (MSDS)

DEMON WP Insecticide - 1 Envelope

Syngenta's Demon WP is an odorless, water-soluble insecticide that delivers quick knockdown and lasting residual control of over 30 pests. The product contains 40% Cypermethrin, one of the most reliable pyrethroids to control indoor and outdoor pest infestations. Demon WP is available in convenient 1-lb jars with scoops and in envelopes which greatly reduces the efforts of mixing. One pound of the product makes up to 50 gallons of finished solution.

Why Should You Use DEMON WP?

Demon WP is a broad label insecticide providing fast kill and long-term residual control at a lesser cost.

Directions for DEMON WP Use

Demon WP is in the form of soluble powder that is intended for water dilutions. Following the dilution rates found in the product label, add measured amounts of Demon WP to water to produce the desired amount of solution. Compatible pesticides may be mixed together with the product unless prohibited by the product label. Use the finished solutions for surface treatments, crack and crevice treatments or spot applications. Apply solutions using handheld or powered sprayers, crack and crevice injectors or paint brushes.

Permitted areas of use in nonfood/nonfeed areas include, but are not limited to: aircraft (cargo and non-cabin areas only), apartment buildings, boiler rooms, buses, closets, correctional facilities, decks, entries, factories, fencing, floor drains (that lead to sewers), food granaries, food grain mills, food manufacturing, processing and serving establishments; furniture, garages, garbage rooms, greenhouses (non-commercial), hospitals (non-patient areas), hotels and motels, houses, industrial buildings, laboratories, livestock/poultry housing, landscape vegetation, locker rooms, machine rooms, mausoleums, mobile homes, mop closets, mulch, nursing homes, offices, patios, pet kennels,porches, railcars, restaurants, storage rooms, schools, sewers (dry), stores, trailers, trees, trucks, utility passages, vessels, vestibules, warehouses, wineries, and yards.

Repeat treatments as necessary, but not more than once every 7 days.

Where to Apply DEMON WP

For use by commercial applicators in, on and around buildings and structures for the control of listed pests, including on lawns, ornamental trees and shrubs around residential, institutional, public, commercial, agricultural and industrial buildings; and parks, recreational areas and athletic fields.

Demon WP may be used as a general surface, crack and crevice and/or spot treatment in the non-food areas of food handling establishments. Examples of non-food areas include garbage rooms, lavatories, floor drains (to sewers), entries and vestibules, offices, locker rooms, machine rooms, boiler rooms, garages, mop closets, and storage (after canning or bottling).

Do not use Demon WP in food areas of food handling establishments, restaurants or other areas where food is commercially prepared, processed or served. Food areas include areas for receiving, storage, packing (canning, bottling, wrapping, boxing), preparing, edible waste storage and enclosed processing systems (mills, dairies, edible oils, syrups). Serving areas (when food is exposed and facility is in operation) also would be considered a food area.

Demon WP Product Label

Demon WP Material Safety Data Sheet (MSDS)

DEMON WP Insecticide - 1 Envelope

Syngenta's Demon WP is an odorless, water-soluble insecticide that delivers quick knockdown and lasting residual control of over 30 pests. The product contains 40% Cypermethrin, one of the most reliable pyrethroids to control indoor and outdoor pest infestations. Demon WP is available in convenient 1-lb jars with scoops and in envelopes which greatly reduces the efforts of mixing. One pound of the product makes up to 50 gallons of finished solution.

Why Should You Use DEMON WP?

Demon WP is a broad label insecticide providing fast kill and long-term residual control at a lesser cost.

Directions for DEMON WP Use

Demon WP is in the form of soluble powder that is intended for water dilutions. Following the dilution rates found in the product label, add measured amounts of Demon WP to water to produce the desired amount of solution. Compatible pesticides may be mixed together with the product unless prohibited by the product label. Use the finished solutions for surface treatments, crack and crevice treatments or spot applications. Apply solutions using handheld or powered sprayers, crack and crevice injectors or paint brushes.

Permitted areas of use in nonfood/nonfeed areas include, but are not limited to: aircraft (cargo and non-cabin areas only), apartment buildings, boiler rooms, buses, closets, correctional facilities, decks, entries, factories, fencing, floor drains (that lead to sewers), food granaries, food grain mills, food manufacturing, processing and serving establishments; furniture, garages, garbage rooms, greenhouses (non-commercial), hospitals (non-patient areas), hotels and motels, houses, industrial buildings, laboratories, livestock/poultry housing, landscape vegetation, locker rooms, machine rooms, mausoleums, mobile homes, mop closets, mulch, nursing homes, offices, patios, pet kennels,porches, railcars, restaurants, storage rooms, schools, sewers (dry), stores, trailers, trees, trucks, utility passages, vessels, vestibules, warehouses, wineries, and yards.

Repeat treatments as necessary, but not more than once every 7 days.

Where to Apply DEMON WP

For use by commercial applicators in, on and around buildings and structures for the control of listed pests, including on lawns, ornamental trees and shrubs around residential, institutional, public, commercial, agricultural and industrial buildings; and parks, recreational areas and athletic fields.

Demon WP may be used as a general surface, crack and crevice and/or spot treatment in the non-food areas of food handling establishments. Examples of non-food areas include garbage rooms, lavatories, floor drains (to sewers), entries and vestibules, offices, locker rooms, machine rooms, boiler rooms, garages, mop closets, and storage (after canning or bottling).

Do not use Demon WP in food areas of food handling establishments, restaurants or other areas where food is commercially prepared, processed or served. Food areas include areas for receiving, storage, packing (canning, bottling, wrapping, boxing), preparing, edible waste storage and enclosed processing systems (mills, dairies, edible oils, syrups). Serving areas (when food is exposed and facility is in operation) also would be considered a food area.

Talstar Pro Product Label

Talstar Pro Material Safety Data Sheet (MSDS)

Talstar Pro (formerly Talstar One) - 1 pint

Talstar Pro formerly known as Talstar One's name means one professional product for all control. Talstar Pro is able to target over 75 different pests and is great for in and outdoor uses. Talstar Pro is a long lasting residual that lasts up to 3 months, it is odorless, leaves a clear residual, leaves no stain, non- irritating on the skin and does not break down easily with rain. Talstar Pro is also well known for its effectiveness with termites. With Talstar Professional insecticide you know you'll get the job done right every time. That's because it gives you superior, long-lasting control of the toughest general pests and termites. In fact, Talstar is effective on more than 75 pests. Plus, it's approved for multiple use-sites, so you can use it almost anywhere - indoors, outdoors, industrial, commercial and food-handling areas.

Proven, flexible protection indoors. Talstar Professional is an effective insecticide that's tough on ants and general household pests. In fact, its multi-use label makes it so versatile, you can trust it to provide effective indoor control of bed bugs, fleas, flies, scorpions, spiders and cockroaches almost anywhere, including: industrial and commercial sites, kitchens, restaurants, supermarkets and food processing plants.

Reliable, long-lasting protection outdoors. For outside and perimeter jobs, Talstar Professional is labeled for a broad spectrum of perimeter pests and provides long-lasting residual control of everything from fleas, ticks and flies to mosquitoes, mites, millipedes and termites.

Plus, it's non-staining and contains no odorous or plant-damaging solvents. Once it dries, it is virtually impossible to tell where it has been sprayed. Even better, it leaves no unsightly residues and causes no known phytotoxicity.

Put an end to fire ant colonies fast. Talstar Professional can even be used to destroy fire ant colonies. Simply drench the mound for 95% control in 24 hours, and then apply a broadcast application to eliminate re-infestation of invading fire ants for up to six months.

To control Bees, Wasp, Hornets, and Yellow-Jackets apply a 0.06% emulsion. Application should be made in the late evening when insects are at rest. Spray liberally into hiding and breeding places, especially under attic rafters, contacting as many insects as possible. Retreatment may be necessary to achieve and/or maintain control during periods of high pest pressure. Repeat application is necessary only if there are signs of renewed insect activity. Important: Do not apply emulsion until location of heat pipes, ducts, water and sewer lines and electrical conduits are known and identified. Caution must be taken to avoid puncturing and injection into these structural elements. Do not apply into electrical fixtures, switches, or sockets.
In the home, all food processing surfaces and utensils in the treatment area should be covered during treatment or thoroughly washed before re-use. Remove pets, birds, and cover aquariums before spraying. Do not permit humans or pets to contact treated surfaces

Talstar Pro formerly known as Talstar One's name means one professional product for all control. Talstar Pro is able to target over 75 different pests and is great for in and outdoor uses. Talstar Pro is a long lasting residual that lasts up to 3 months, it is odorless, leaves a clear residual, leaves no stain, non- irritating on the skin and does not break down easily with rain. Talstar Pro is also well known for its effectiveness with termites. With Talstar Professional insecticide you know you'll get the job done right every time. That's because it gives you superior, long-lasting control of the toughest general pests and termites. In fact, Talstar is effective on more than 75 pests. Plus, it's approved for multiple use-sites, so you can use it almost anywhere - indoors, outdoors, industrial, commercial and food-handling areas.

Cyzmic CS Product Label

Cyzmic CS Material Safety Data Sheet (MSDS)

Cyzmic CS - Quart

Cyzmic CS is a broad label insecticide which features CapVantage™ Technology which greatly improves residual life and efficiency of applied solutions. Cyzmic is a controlled release insecticide which means that microencapsulated Lambda Cyhalothin is released only when insects come into contact with the microcapsules. Cyzmic CS provides fast knockdown and extended residuals with little or no odor. Covering more than 70 pests in its label, Cyzmic is the solution to all your indoor and outdoor pest problems.

Why Should You Use Cyzmic CS?

Cyzmic CS is a broad label insecticide with unparalleled efficiency in both contact kill and residual control.

Directions for Cyzmic CS Use

Cyzmic CS is to be diluted with water for crack and crevice applications, spot treatments and surface treatments. Apply finished solutions using handheld or powered application equipment. The product may be mixed with foaming agents to treat infestations in structural voids. Registered pesticides and insect growth regulators may be tank mixed with Cyzmic CS unless explicitly prohibited by the product label. Use the product to treat infestations of household pests, ornamental pests and lawn/turfgrass pests.

Apply the product as directed in the product label. Carefully read the product label for dilution and application rates, precautions and specific use instructions.

Where to Apply Cyzmic CS

Use Cyzmic CS as a general surface, crack and crevice, or spot treatments in and around residential, commercial, public and industrial buildings. These areas include apartment buildings, homes, hospitals, hotels, mobile homes, greenhouses, non-food/feed areas of food/feed handling establishments, stores, warehouses, factories, restaurants, livestock/poultry housing and food processing plants.

Evergreen Pyrethrins Material Safety Data Sheet (MSDS)

Evergreen Pyrethrins (PyGanic PRO) - 1 pint

Evergreen Pyrethrins is a broad spectrum insecticide for use in both certified organic production and situations where a botanical insecticide fits the needs of the customer.

Advantages of Evergreen Pyrethrins Insecticide

Delivers fast, effective control of insects including Ants, Cockroaches, and Stored Product Pests.
Contains pyrethrum - a botanical insecticide derived from a chrysanthemum flower.
Food and Non-Food Areas of Food Handling Processing facilities.
For use in Certified organic barns, dairies, and poultry houses.

Evergreen Pyrethrins Material Safety Data Sheet (MSDS)

Evergreen Pyrethrins (PyGanic PRO) - 1 pint

Evergreen Pyrethrins is a broad spectrum insecticide for use in both certified organic production and situations where a botanical insecticide fits the needs of the customer.

Advantages of Evergreen Pyrethrins Insecticide

Delivers fast, effective control of insects including Ants, Cockroaches, and Stored Product Pests.
Contains pyrethrum - a botanical insecticide derived from a chrysanthemum flower.
Food and Non-Food Areas of Food Handling Processing facilities.
For use in Certified organic barns, dairies, and poultry houses.

CB PCO Fogger with Pyrethrins

Contains natural based pyrethrins - making it ideal for use in sensitive areas such as homes, schools and hospitals

CB PCO Fogger releases all the active ingredients like a fog when its pressed. It is recommended to leave the facilities for two to three hours while CB PCO Fogger is releasing

CB PCO Fogger with Pyrethrins

Contains natural based pyrethrins - making it ideal for use in sensitive areas such as homes, schools and hospitals

CB PCO Fogger releases all the active ingredients like a fog when its pressed. It is recommended to leave the facilities for two to three hours while CB PCO Fogger is releasing

Fireback Bed Bug & Insect Spray Product Label & MSDS

Nisus Fireback Bed Bug & Insect Spray

Nisus Fireback is a powerful contact kill and flushing insecticide with Pyrethrins. This aerosol spray provides a 3-month residual protection effective against common house insects such as bedbugs. Fireback has a water-based formulation that is odor-free and non-staining to surfaces and fabrics. With Smart Can Technology, each can of Fireback includes a fan spray, pin stream, any angle spray and cap holder for easy application.

Why Should You Use?

Fireback is a broad label insecticide that kills pests on contact and leaves a 90-day residual to prevent infestations.

Directions for Use

Shake well before using. Hold the container upright and spray to surfaces from a distance of 12 to 15 inches. Spray into infected areas and hiding places such as cracks and crevices, voids, baseboards, under and behind sinks, cabinets, baseboards, floors, around drains and plumbing, floors, carpets, mattresses and furniture. Spray directly to insects if possible. Use as a surface spray by treating areas at the rate of 20 seconds per 1,000 cubic feet. Leave room and keep the area closed for 15 minutes. Ventilate before occupying. Repeat treatments as necessary. Carefully read the product label for specific use directions.

Where to Apply

Nisus Fireback is for residential and commercial use. Do not use the product in food handling establishments or areas where food is prepared or processed.

Fireback Bed Bug & Insect Spray Product Label & MSDS

Nisus Fireback Bed Bug & Insect Spray

Nisus Fireback is a powerful contact kill and flushing insecticide with Pyrethrins. This aerosol spray provides a 3-month residual protection effective against common house insects such as bedbugs. Fireback has a water-based formulation that is odor-free and non-staining to surfaces and fabrics. With Smart Can Technology, each can of Fireback includes a fan spray, pin stream, any angle spray and cap holder for easy application.

Why Should You Use?

Fireback is a broad label insecticide that kills pests on contact and leaves a 90-day residual to prevent infestations.

Directions for Use

Shake well before using. Hold the container upright and spray to surfaces from a distance of 12 to 15 inches. Spray into infected areas and hiding places such as cracks and crevices, voids, baseboards, under and behind sinks, cabinets, baseboards, floors, around drains and plumbing, floors, carpets, mattresses and furniture. Spray directly to insects if possible. Use as a surface spray by treating areas at the rate of 20 seconds per 1,000 cubic feet. Leave room and keep the area closed for 15 minutes. Ventilate before occupying. Repeat treatments as necessary. Carefully read the product label for specific use directions.

Where to Apply

Nisus Fireback is for residential and commercial use. Do not use the product in food handling establishments or areas where food is prepared or processed.

Fireback Spider & Scorpion Jet Spray Product Label & MSDS

Fireback Spider & Scorpion Jet Spray - 17 oz.

Fireback Spider & Scorpion Jet Spray has a Broad Spectrum Insecticide Highly Effective Against Ants, Centipedes, Cockroaches, Crickets, Firebrats, Millipedes, Moths, Pillbugs, Scorpions, Silverfish, Sowbugs, Spiders, Wasps, and Other Pests with up to 3 months long residual effect.

Advantages of Fireback Spider & Scorpion Jet Spray

- Unique tip allows both spray and jet stream application
- For residential/commercial use
- May be used in Non-Food/Food areas of food/feed processing plants
- Controls residential insects
- Kills on contact
- Seeks out bugs where they hide
- Non-staining
- Low odor
- Water-based formula
- Protects for up to 3 months

Please refer to and follow the instructions on the Fireback spray label.

Fireback Spider & Scorpion Jet Spray Product Label & MSDS

Fireback Spider & Scorpion Jet Spray - 17 oz.

Fireback Spider & Scorpion Jet Spray has a Broad Spectrum Insecticide Highly Effective Against Ants, Centipedes, Cockroaches, Crickets, Firebrats, Millipedes, Moths, Pillbugs, Scorpions, Silverfish, Sowbugs, Spiders, Wasps, and Other Pests with up to 3 months long residual effect.

Advantages of Fireback Spider & Scorpion Jet Spray

- Unique tip allows both spray and jet stream application
- For residential/commercial use
- May be used in Non-Food/Food areas of food/feed processing plants
- Controls residential insects
- Kills on contact
- Seeks out bugs where they hide
- Non-staining
- Low odor
- Water-based formula
- Protects for up to 3 months

Please refer to and follow the instructions on the Fireback spray label.

The 10 Hour ™ Insect Repellent Product Label

The 10 Hour ™ Insect Repellent Material Safety Data Sheet (MSDS)

The 10 Hour ™ Insect Repellent

Recommended by the U.S Department of Agriculture, the 10 Hour Insect Repellent is widely used by U.S. servicemen who venture outdoors. The repellent contains the active ingredient DEET, a compound proven to keep biting insects at bay. The 10 Hour Insect Repellent guarantees 10 hours of total outdoor protection against insects which may carry harmful viruses and diseases.

Why Should You Use The 10 Hour Insect Repellent?

Applying a thin film of The 10 Hour Insect Repellent on skin creates an insect barrier that lasts up to ten hours. The scentless repellent is formulated not to wear off even on sweat. The 2 oz. spray bottle is equivalent to 3 aerosol cans of repellent.

Directions for The 10 Hour ™ Insect Repellent Use

The 10 Hour Insect Repellent works by applying a thin film of the product on exposed skin parts or clothing. Use the product by spraying directly on skin or clothing. For continuous films, apply a few drops on skin and spread evenly by rubbing. Apply on shoe tops and socks to thwart crawling insects such as ticks and chiggers.

Product should not be applied on skin with open cuts or wounds.

Never use the product for space treatments.

Do not use the repellent near food.

Product causes temporary eye injuries if applied incorrectly.

Do not apply the product near the eyes and mouth and do not spray directly into face.

Wash treated skin and clothing with soap and water when repellent film is no longer needed.

Wash treated clothing before reusing.

Stop using the product immediately if irritation occurs.

Repellent must be kept out of reach of children.

Product is harmful if ingested.

Do not apply near synthetic fabrics such as acetate and rayon.

Product causes damage to leather, plastics and painted surfaces.

Cyzmic CS Product Label

Cyzmic CS Material Safety Data Sheet (MSDS)

Cyzmic CS - 8 oz

Cyzmic CS is a broad label insecticide which features CapVantage™ Technology which greatly improves residual life and efficiency of applied solutions. Cyzmic is a controlled release insecticide which means that microencapsulated Lambda Cyhalothin is released only when insects come into contact with the microcapsules. Cyzmic CS provides fast knockdown and extended residuals with little or no odor. Covering more than 70 pests in its label, Cyzmic is the solution to all your indoor and outdoor pest problems.

Why Should You Use Cyzmic CS?

Cyzmic CS is a broad label insecticide with unparalleled efficiency in both contact kill and residual control.

Directions for Cyzmic CS Use

Cyzmic CS is to be diluted with water for crack and crevice applications, spot treatments and surface treatments. Apply finished solutions using handheld or powered application equipment. The product may be mixed with foaming agents to treat infestations in structural voids. Registered pesticides and insect growth regulators may be tank mixed with Cyzmic CS unless explicitly prohibited by the product label. Use the product to treat infestations of household pests, ornamental pests and lawn/turfgrass pests.

Apply the product as directed in the product label. Carefully read the product label for dilution and application rates, precautions and specific use instructions.

Where to Apply Cyzmic CS

Use Cyzmic CS as a general surface, crack and crevice, or spot treatments in and around residential, commercial, public and industrial buildings. These areas include apartment buildings, homes, hospitals, hotels, mobile homes, greenhouses, non-food/feed areas of food/feed handling establishments, stores, warehouses, factories, restaurants, livestock/poultry housing and food processing plants.

Alpine Flea Insecticide with IGR Product Label

Alpine Flea Insecticide with IGR Material Safety Data Sheet

Alpine Flea Insecticide with IGR

With quicker knockdown, longer-lasting control, and better affordability than competitive products, Alpine Flea Insecticide with IGR is the future of practical, reliable flea control.

FOR USE IN AND AROUND:

Apartments, Commercial Structures, Homes, Hotels, Kennels, Motels and Veterinary Clinics.

Advantages of Alpine Flea Insecticide with IGR:

- Prallethrin for quick knockdown.
- IGR pyriproxyfen kills hatching eggs for up to seven months.
- Reduced Risk active ingredient dinotefuran kills adult fleas for up to 30 days.
- Advanced pressurized formulation.
- Won't soak carpets; reduces treatment time and labor.
- Application can take just 15 minutes.
- Minimizes homeowner re-entry time.

Alpine Flea Insecticide with IGR Product Label

Alpine Flea Insecticide with IGR Material Safety Data Sheet

Alpine Flea Insecticide with IGR

With quicker knockdown, longer-lasting control, and better affordability than competitive products, Alpine Flea Insecticide with IGR is the future of practical, reliable flea control.

FOR USE IN AND AROUND:

Apartments, Commercial Structures, Homes, Hotels, Kennels, Motels and Veterinary Clinics.

Advantages of Alpine Flea Insecticide with IGR:

- Prallethrin for quick knockdown.
- IGR pyriproxyfen kills hatching eggs for up to seven months.
- Reduced Risk active ingredient dinotefuran kills adult fleas for up to 30 days.
- Advanced pressurized formulation.
- Won't soak carpets; reduces treatment time and labor.
- Application can take just 15 minutes.
- Minimizes homeowner re-entry time.

FenvaStar EcoCap Product Label

FenvaStar EcoCap Material Safety Data Sheet (MSDS)

FenvaStar EcoCap - 8oz.

Fenvastar EcoCap is a microencapsulated suspension concentrate containing 0.3 pounds active ingredient per gallon.

Fenvastar EcoCap is designed to provide long residual activity against pests listed on this label when applied as surface or spot treatments or as a crack and crevice spray in and around residential and commercial structures, as well as on turf and landscaping. Fenvastar EcoCap may be sprayed on any surface that will not be stained by water. DO NOT use this product as a fogger or apply it as a space spray. Do not apply in electrical conduits, junction and switch boxes, motor housings, or other electrical equipment due to shock hazard from water-based spray.

Fenvastar EcoCap should be mixed with water and applied with hand pressurized or power operated sprayers. Shake container of Fenvastar EcoCap before diluting. Clean spray equipment before use. For dilution, add approximately half the required water to spray tank and then add the appropriate amount of Fenvastar EcoCap. Agitate and slowly add the remaining water. Agitate spray thoroughly before using and also occasionally during use to ensure dispersion.

Apply as a course, wet spray to surfaces where these pests are normally found. Treat floors, baseboards, around doors and windows, in attics, crawl spaces, eaves, corners, closets, walls, utility pipes, storage areas, and all cracks and crevices. Treat underneath sinks, dishwashers, refrigerators, stoves, the underside of shelves, drawers, cabinets, areas behind pipes, and in all places where these insects shelter. Contact as many insects as possible with direct spray. Repeat applications as needed, but do not exceed more than one (1) application every seven (7) days.

Please refer to and follow the instructions on the Product label.

FenvaStar EcoCap Product Label

FenvaStar EcoCap Material Safety Data Sheet (MSDS)

FenvaStar EcoCap - 8oz.

Fenvastar EcoCap is a microencapsulated suspension concentrate containing 0.3 pounds active ingredient per gallon.

Fenvastar EcoCap is designed to provide long residual activity against pests listed on this label when applied as surface or spot treatments or as a crack and crevice spray in and around residential and commercial structures, as well as on turf and landscaping. Fenvastar EcoCap may be sprayed on any surface that will not be stained by water. DO NOT use this product as a fogger or apply it as a space spray. Do not apply in electrical conduits, junction and switch boxes, motor housings, or other electrical equipment due to shock hazard from water-based spray.

Fenvastar EcoCap should be mixed with water and applied with hand pressurized or power operated sprayers. Shake container of Fenvastar EcoCap before diluting. Clean spray equipment before use. For dilution, add approximately half the required water to spray tank and then add the appropriate amount of Fenvastar EcoCap. Agitate and slowly add the remaining water. Agitate spray thoroughly before using and also occasionally during use to ensure dispersion.

Apply as a course, wet spray to surfaces where these pests are normally found. Treat floors, baseboards, around doors and windows, in attics, crawl spaces, eaves, corners, closets, walls, utility pipes, storage areas, and all cracks and crevices. Treat underneath sinks, dishwashers, refrigerators, stoves, the underside of shelves, drawers, cabinets, areas behind pipes, and in all places where these insects shelter. Contact as many insects as possible with direct spray. Repeat applications as needed, but do not exceed more than one (1) application every seven (7) days.

Please refer to and follow the instructions on the Product label.

Bedlam Plus Product Label

Bedlam Plus Material Safety Data Sheet (MSDS)

Bedlam Plus Product Brochure

Bedlam Plus Bed Bug Insecticide Spray - 17 oz.

New Bedlam Plus Bed Bug Spray is a potent contact insecticide against bed bugs, lice, dust mites, fleas, and ticks. New Bedlam Plus features a dual mode of action that kills the toughest pyrethroid-resistant bed bugs fast.

Why Should You Use Bedlam Plus ?

Bedlam Plus Bed Bug Spray Will not stain water-safe fabrics and surfaces and is safe for use on mattresses, wood furniture and carpet. Featuring the perfect combination of quick kill and residual control, Bedlam Plus is proven to keep killing pyrethroid-resistant bed bugs and their eggs for two weeks after treatment.

Directions for Bedlam Plus Use

Carefully read the product label before applications and treatments. Shake the container well before use. Aim the product towards the infested area. For space treatments, vacate the treated area after applications and allow the product to settle. Ventilate the treated area before reoccupying. Do NOT allow children and pets to access treated surfaces until the product residue has dried.

Not for use in food handling areas

TO KILL BEDBUGS: Treat bed bug infested areas by using the product for spot treatments. Spray cracks and crevices, baseboards, floorboards, headboards, and walls where bed bugs are found and most likely to congregate. Spray the product in mattress folds, seams and tufts which harbor bed bugs.

TO KILL DUST MITES: Thoroughly vacuum rooms and surfaces where mites are spotted such as mattresses, box springs, headboards, walls, floors, carpeting, and baseboards. Spray evenly on infested surfaces. When treating mattresses and other bedding fabrics, allow the product to dry before replacing.

TO KILL TICKS AND FLEAS: Spray moderate amounts on pet areas, sleeping areas, pet bedding, carpets, rugs and other floor covering. The product is NOT recommended for use in pets.

Shelf Life -3 years or more if stored at room temperature

MANGE DIP Product Label

MANGE DIP Material Safety Data Sheet (MSDS)

FLEA, TICK, AND MANGE DIP - Pint.

Flea, Tick, and Mange Dip by Martin's a product that is used on dogs to kill fleas, flies, lice, mange mites, and ticks, including deer ticks, which are ticks that can be carriers of Lyme disease.

To use Flea, Tick, and Mange Dip on dog premises, thoroughly spray the infestated areas, pets beds or resting quarters, and where the dogs play frequently. Fresh bedding should be placed in the pet bed or resting quarters following the treatment. Do not spray this product onto food or water. Repeat application of Flea, Tick, and Mange Dip Insecticide as needed but not more than once every two weeks. To dilute the solution for a premise spray, mix 4 fl. oz. of Flea, Tick, and Mange Dip to 1 gallon of water.

To use Flea, Tick, and Mange Dip on animal, thoroughly wet the animal by dipping, sponging, or spraying. To dilute the solution for animal dip, mix 2 fl. oz. of Flea, Tick, and Mange Dip to 1 gallon of water. After application, allow the animal to dry in a warm place. Do not rinse or towel off the animal. NOTE: Do not reapply the treatment for 3 weeks and please consult with a veterinarian before applying this product on aged, debiliated, pregnant, and nursing animals or animals that are medicated. Also keep in mind that sensitivities or reactions may occur after using ANY pesticide for pets. If you do notice that sensitivities occur, bathe your pet with lots of water and mild soap. If sensitivities continue, consult a veterinarian immediately.

MANGE DIP Product Label

MANGE DIP Material Safety Data Sheet (MSDS)

FLEA, TICK, AND MANGE DIP - Pint.

Flea, Tick, and Mange Dip by Martin's a product that is used on dogs to kill fleas, flies, lice, mange mites, and ticks, including deer ticks, which are ticks that can be carriers of Lyme disease.

To use Flea, Tick, and Mange Dip on dog premises, thoroughly spray the infestated areas, pets beds or resting quarters, and where the dogs play frequently. Fresh bedding should be placed in the pet bed or resting quarters following the treatment. Do not spray this product onto food or water. Repeat application of Flea, Tick, and Mange Dip Insecticide as needed but not more than once every two weeks. To dilute the solution for a premise spray, mix 4 fl. oz. of Flea, Tick, and Mange Dip to 1 gallon of water.

To use Flea, Tick, and Mange Dip on animal, thoroughly wet the animal by dipping, sponging, or spraying. To dilute the solution for animal dip, mix 2 fl. oz. of Flea, Tick, and Mange Dip to 1 gallon of water. After application, allow the animal to dry in a warm place. Do not rinse or towel off the animal. NOTE: Do not reapply the treatment for 3 weeks and please consult with a veterinarian before applying this product on aged, debiliated, pregnant, and nursing animals or animals that are medicated. Also keep in mind that sensitivities or reactions may occur after using ANY pesticide for pets. If you do notice that sensitivities occur, bathe your pet with lots of water and mild soap. If sensitivities continue, consult a veterinarian immediately.

FLY-BAN Product Label

FLY-BAN Material Safety Data Sheet (MSDS)

Martin's Fly-Ban Synergized Pour-On - Qt.

Martin's Fly-Ban Synergized Pour-On Treatment is a formula that uses the active ingredient Permethrin and the synergist Piperonyl Butoxide to control flies, keds, lice, gnat, ticks and other labeled insects on beef cattle, lactating and non-lactating dairy cattle, calves, horses, foals, sheep, and lambs. It is easily applied as a pour on application or a wipe on, back rubber, or ready to use spray application. Please refer to the product label for complete list of pests and directions on application.

For Lactating and Non-lactating Dairy Cattle, Beef Cattle, and Calves:

Apply 1.5ml per 100 lbs body weight of animal to a maximum of 15ml for any one animal. For heavy infestations of horn-flies, apply 2.0ml per 100 lbs body weight of animal to a maximum of 20ml for any one animal.

To use as a pour-on application: pour the correct dose along the back and down the face but do not put in contact with eyes. To use as a ready-to-use spray, use undiluted concentrate in a mist sprayer to apply the correct dose and apply directly to the neck, face, back, legs, and ears.

To use for a back rubber application: mix 64ml. per gallon of mineral oil.

For Sheep and Lambs:

To use as a pour-on application: apply 1ml per 50 lbs body weight of animal with a maximum of 12ml for any one animal. NOTE: For optimum control, all animals in the flock should be treated after they have been sheared.

FLY-BAN Product Label

FLY-BAN Material Safety Data Sheet (MSDS)

Martin's Fly-Ban Synergized Pour-On - Qt.

Martin's Fly-Ban Synergized Pour-On Treatment is a formula that uses the active ingredient Permethrin and the synergist Piperonyl Butoxide to control flies, keds, lice, gnat, ticks and other labeled insects on beef cattle, lactating and non-lactating dairy cattle, calves, horses, foals, sheep, and lambs. It is easily applied as a pour on application or a wipe on, back rubber, or ready to use spray application. Please refer to the product label for complete list of pests and directions on application.

For Lactating and Non-lactating Dairy Cattle, Beef Cattle, and Calves:

Apply 1.5ml per 100 lbs body weight of animal to a maximum of 15ml for any one animal. For heavy infestations of horn-flies, apply 2.0ml per 100 lbs body weight of animal to a maximum of 20ml for any one animal.

To use as a pour-on application: pour the correct dose along the back and down the face but do not put in contact with eyes. To use as a ready-to-use spray, use undiluted concentrate in a mist sprayer to apply the correct dose and apply directly to the neck, face, back, legs, and ears.

To use for a back rubber application: mix 64ml. per gallon of mineral oil.

For Sheep and Lambs:

To use as a pour-on application: apply 1ml per 50 lbs body weight of animal with a maximum of 12ml for any one animal. NOTE: For optimum control, all animals in the flock should be treated after they have been sheared.

FLY-BAN Product Label

FLY-BAN Material Safety Data Sheet (MSDS)

Martin's Fly-Ban Synergized Pour-On - 1/2 Gal.

Martin's Fly-Ban Synergized Pour-On Treatment is a formula that uses the active ingredient Permethrin and the synergist Piperonyl Butoxide to control flies, keds, lice, gnat, ticks and other labeled insects on beef cattle, lactating and non-lactating dairy cattle, calves, horses, foals, sheep, and lambs. It is easily applied as a pour on application or a wipe on, back rubber, or ready to use spray application. Please refer to the product label for complete list of pests and directions on application.

For Lactating and Non-lactating Dairy Cattle, Beef Cattle, and Calves:

Apply 1.5ml per 100 lbs body weight of animal to a maximum of 15ml for any one animal. For heavy infestations of horn-flies, apply 2.0ml per 100 lbs body weight of animal to a maximum of 20ml for any one animal.

To use as a pour-on application: pour the correct dose along the back and down the face but do not put in contact with eyes. To use as a ready-to-use spray, use undiluted concentrate in a mist sprayer to apply the correct dose and apply directly to the neck, face, back, legs, and ears.

To use for a back rubber application: mix 64ml. per gallon of mineral oil.

For Sheep and Lambs:

To use as a pour-on application: apply 1ml per 50 lbs body weight of animal with a maximum of 12ml for any one animal. NOTE: For optimum control, all animals in the flock should be treated after they have been sheared.

FLY-BAN Product Label

FLY-BAN Material Safety Data Sheet (MSDS)

Martin's Fly-Ban Synergized Pour-On - 1/2 Gal.

Martin's Fly-Ban Synergized Pour-On Treatment is a formula that uses the active ingredient Permethrin and the synergist Piperonyl Butoxide to control flies, keds, lice, gnat, ticks and other labeled insects on beef cattle, lactating and non-lactating dairy cattle, calves, horses, foals, sheep, and lambs. It is easily applied as a pour on application or a wipe on, back rubber, or ready to use spray application. Please refer to the product label for complete list of pests and directions on application.

For Lactating and Non-lactating Dairy Cattle, Beef Cattle, and Calves:

Apply 1.5ml per 100 lbs body weight of animal to a maximum of 15ml for any one animal. For heavy infestations of horn-flies, apply 2.0ml per 100 lbs body weight of animal to a maximum of 20ml for any one animal.

To use as a pour-on application: pour the correct dose along the back and down the face but do not put in contact with eyes. To use as a ready-to-use spray, use undiluted concentrate in a mist sprayer to apply the correct dose and apply directly to the neck, face, back, legs, and ears.

To use for a back rubber application: mix 64ml. per gallon of mineral oil.

For Sheep and Lambs:

To use as a pour-on application: apply 1ml per 50 lbs body weight of animal with a maximum of 12ml for any one animal. NOTE: For optimum control, all animals in the flock should be treated after they have been sheared.

FLY-BAN Product Label

FLY-BAN Material Safety Data Sheet (MSDS)

Martin's Fly-Ban Synergized Pour-On - Gal.

Martin's Fly-Ban Synergized Pour-On Treatment is a formula that uses the active ingredient Permethrin and the synergist Piperonyl Butoxide to control flies, keds, lice, gnat, ticks and other labeled insects on beef cattle, lactating and non-lactating dairy cattle, calves, horses, foals, sheep, and lambs. It is easily applied as a pour on application or a wipe on, back rubber, or ready to use spray application. Please refer to the product label for complete list of pests and directions on application.

For Lactating and Non-lactating Dairy Cattle, Beef Cattle, and Calves:

Apply 1.5ml per 100 lbs body weight of animal to a maximum of 15ml for any one animal. For heavy infestations of horn-flies, apply 2.0ml per 100 lbs body weight of animal to a maximum of 20ml for any one animal.

To use as a pour-on application: pour the correct dose along the back and down the face but do not put in contact with eyes. To use as a ready-to-use spray, use undiluted concentrate in a mist sprayer to apply the correct dose and apply directly to the neck, face, back, legs, and ears.

To use for a back rubber application: mix 64ml. per gallon of mineral oil.

For Sheep and Lambs:

To use as a pour-on application: apply 1ml per 50 lbs body weight of animal with a maximum of 12ml for any one animal. NOTE: For optimum control, all animals in the flock should be treated after they have been sheared.

FLY-BAN Product Label

FLY-BAN Material Safety Data Sheet (MSDS)

Martin's Fly-Ban Synergized Pour-On - Gal.

Martin's Fly-Ban Synergized Pour-On Treatment is a formula that uses the active ingredient Permethrin and the synergist Piperonyl Butoxide to control flies, keds, lice, gnat, ticks and other labeled insects on beef cattle, lactating and non-lactating dairy cattle, calves, horses, foals, sheep, and lambs. It is easily applied as a pour on application or a wipe on, back rubber, or ready to use spray application. Please refer to the product label for complete list of pests and directions on application.

For Lactating and Non-lactating Dairy Cattle, Beef Cattle, and Calves:

Apply 1.5ml per 100 lbs body weight of animal to a maximum of 15ml for any one animal. For heavy infestations of horn-flies, apply 2.0ml per 100 lbs body weight of animal to a maximum of 20ml for any one animal.

To use as a pour-on application: pour the correct dose along the back and down the face but do not put in contact with eyes. To use as a ready-to-use spray, use undiluted concentrate in a mist sprayer to apply the correct dose and apply directly to the neck, face, back, legs, and ears.

To use for a back rubber application: mix 64ml. per gallon of mineral oil.

For Sheep and Lambs:

To use as a pour-on application: apply 1ml per 50 lbs body weight of animal with a maximum of 12ml for any one animal. NOTE: For optimum control, all animals in the flock should be treated after they have been sheared.

FLY-BAN Product Label

FLY-BAN Material Safety Data Sheet (MSDS)

Martin's Fly-Ban Synergized Pour-On - 2.5 Gals.

Martin's Fly-Ban Synergized Pour-On Treatment is a formula that uses the active ingredient Permethrin and the synergist Piperonyl Butoxide to control flies, keds, lice, gnat, ticks and other labeled insects on beef cattle, lactating and non-lactating dairy cattle, calves, horses, foals, sheep, and lambs. It is easily applied as a pour on application or a wipe on, back rubber, or ready to use spray application. Please refer to the product label for complete list of pests and directions on application.

For Lactating and Non-lactating Dairy Cattle, Beef Cattle, and Calves:

Apply 1.5ml per 100 lbs body weight of animal to a maximum of 15ml for any one animal. For heavy infestations of horn-flies, apply 2.0ml per 100 lbs body weight of animal to a maximum of 20ml for any one animal.

To use as a pour-on application: pour the correct dose along the back and down the face but do not put in contact with eyes. To use as a ready-to-use spray, use undiluted concentrate in a mist sprayer to apply the correct dose and apply directly to the neck, face, back, legs, and ears.

To use for a back rubber application: mix 64ml. per gallon of mineral oil.

For Sheep and Lambs:

To use as a pour-on application: apply 1ml per 50 lbs body weight of animal with a maximum of 12ml for any one animal. NOTE: For optimum control, all animals in the flock should be treated after they have been sheared.

FLY-BAN Product Label

FLY-BAN Material Safety Data Sheet (MSDS)

Martin's Fly-Ban Synergized Pour-On - 2.5 Gals.

Martin's Fly-Ban Synergized Pour-On Treatment is a formula that uses the active ingredient Permethrin and the synergist Piperonyl Butoxide to control flies, keds, lice, gnat, ticks and other labeled insects on beef cattle, lactating and non-lactating dairy cattle, calves, horses, foals, sheep, and lambs. It is easily applied as a pour on application or a wipe on, back rubber, or ready to use spray application. Please refer to the product label for complete list of pests and directions on application.

For Lactating and Non-lactating Dairy Cattle, Beef Cattle, and Calves:

Apply 1.5ml per 100 lbs body weight of animal to a maximum of 15ml for any one animal. For heavy infestations of horn-flies, apply 2.0ml per 100 lbs body weight of animal to a maximum of 20ml for any one animal.

To use as a pour-on application: pour the correct dose along the back and down the face but do not put in contact with eyes. To use as a ready-to-use spray, use undiluted concentrate in a mist sprayer to apply the correct dose and apply directly to the neck, face, back, legs, and ears.

To use for a back rubber application: mix 64ml. per gallon of mineral oil.

For Sheep and Lambs:

To use as a pour-on application: apply 1ml per 50 lbs body weight of animal with a maximum of 12ml for any one animal. NOTE: For optimum control, all animals in the flock should be treated after they have been sheared.

HORSE AND STABLE Product Label

HORSE AND STABLE Material Safety Data Sheet (MSDS)

Martin's HORSE AND STABLE RTU MULTI-USE INSECTICIDE - Qt.

Martin's Horse and Stable Multi Use Insecticide is a ready to use formula that is applied to stable animals and other listed animals to control such insects like flies, fleas, ticks, mosquitoes, and more.

Livestock Animals:

Use Martin's Horse and Stable Multi Use Insecticide on livestock animals like cattle, goats, sheep, hogs, and horses to protect them from horn flies, face flies, house flies, mosquitoes, gnats, and more. To use Martin's Horse and Stable Multi Use Insecticide on livestock animals, apply the product as a light mist that is sufficient enough to wet the surface of the hair. DO NOT spray into the eyes of the animal. Repeat the treatment daily or at intervals necessary to give the animal a continued protection.

Dogs:

Martin's Horse and Stable Multi Use Insecticide can also be used on dogs to control such pests as fleas, ticks, and lice. To use Martin's Horse and Stable Multi use Insecticide on dogs, spray by starting at the tail and moving the dispenser rapidly. Make sure the entire body is covered, including the legs and underbody of the animal. While you are spraying the treatment, fluff the hair of the animal so that it spray will not penetrate to the skin. The spray should be applied so that it wets the fur thoroughly, but do not saturate the animal with the treatment. Use protective gloves when you are applying the product and allow enough time for the dog to completely dry.

DO NOT apply product to genetalia. Repeat the treatment every two weeks as necessary.

DO NOT use on puppies that are younger than 12 weeks old and this product cannot be applied to cats or kittens.

HORSE AND STABLE Product Label

HORSE AND STABLE Material Safety Data Sheet (MSDS)

Martin's HORSE AND STABLE RTU MULTI-USE INSECTICIDE - Qt.

Martin's Horse and Stable Multi Use Insecticide is a ready to use formula that is applied to stable animals and other listed animals to control such insects like flies, fleas, ticks, mosquitoes, and more.

Livestock Animals:

Use Martin's Horse and Stable Multi Use Insecticide on livestock animals like cattle, goats, sheep, hogs, and horses to protect them from horn flies, face flies, house flies, mosquitoes, gnats, and more. To use Martin's Horse and Stable Multi Use Insecticide on livestock animals, apply the product as a light mist that is sufficient enough to wet the surface of the hair. DO NOT spray into the eyes of the animal. Repeat the treatment daily or at intervals necessary to give the animal a continued protection.

Dogs:

Martin's Horse and Stable Multi Use Insecticide can also be used on dogs to control such pests as fleas, ticks, and lice. To use Martin's Horse and Stable Multi use Insecticide on dogs, spray by starting at the tail and moving the dispenser rapidly. Make sure the entire body is covered, including the legs and underbody of the animal. While you are spraying the treatment, fluff the hair of the animal so that it spray will not penetrate to the skin. The spray should be applied so that it wets the fur thoroughly, but do not saturate the animal with the treatment. Use protective gloves when you are applying the product and allow enough time for the dog to completely dry.

DO NOT apply product to genetalia. Repeat the treatment every two weeks as necessary.

DO NOT use on puppies that are younger than 12 weeks old and this product cannot be applied to cats or kittens.

HORSE AND STABLE Product Label

HORSE AND STABLE Material Safety Data Sheet (MSDS)

Martin's HORSE AND STABLE RTU MULTI-USE INSECTICIDE - Gal.

Martin's Horse and Stable Multi Use Insecticide is a ready to use formula that is applied to stable animals and other listed animals to control such insects like flies, fleas, ticks, mosquitoes, and more.

Livestock Animals:

Use Martin's Horse and Stable Multi Use Insecticide on livestock animals like cattle, goats, sheep, hogs, and horses to protect them from horn flies, face flies, house flies, mosquitoes, gnats, and more. To use Martin's Horse and Stable Multi Use Insecticide on livestock animals, apply the product as a light mist that is sufficient enough to wet the surface of the hair. DO NOT spray into the eyes of the animal. Repeat the treatment daily or at intervals necessary to give the animal a continued protection.

Dogs:

Martin's Horse and Stable Multi Use Insecticide can also be used on dogs to control such pests as fleas, ticks, and lice. To use Martin's Horse and Stable Multi use Insecticide on dogs, spray by starting at the tail and moving the dispenser rapidly. Make sure the entire body is covered, including the legs and underbody of the animal. While you are spraying the treatment, fluff the hair of the animal so that it spray will not penetrate to the skin. The spray should be applied so that it wets the fur thoroughly, but do not saturate the animal with the treatment. Use protective gloves when you are applying the product and allow enough time for the dog to completely dry.

DO NOT apply product to genetalia. Repeat the treatment every two weeks as necessary.

DO NOT use on puppies that are younger than 12 weeks old and this product cannot be applied to cats or kittens.

HORSE AND STABLE Product Label

HORSE AND STABLE Material Safety Data Sheet (MSDS)

Martin's HORSE AND STABLE RTU MULTI-USE INSECTICIDE - Gal.

Martin's Horse and Stable Multi Use Insecticide is a ready to use formula that is applied to stable animals and other listed animals to control such insects like flies, fleas, ticks, mosquitoes, and more.

Livestock Animals:

Use Martin's Horse and Stable Multi Use Insecticide on livestock animals like cattle, goats, sheep, hogs, and horses to protect them from horn flies, face flies, house flies, mosquitoes, gnats, and more. To use Martin's Horse and Stable Multi Use Insecticide on livestock animals, apply the product as a light mist that is sufficient enough to wet the surface of the hair. DO NOT spray into the eyes of the animal. Repeat the treatment daily or at intervals necessary to give the animal a continued protection.

Dogs:

Martin's Horse and Stable Multi Use Insecticide can also be used on dogs to control such pests as fleas, ticks, and lice. To use Martin's Horse and Stable Multi use Insecticide on dogs, spray by starting at the tail and moving the dispenser rapidly. Make sure the entire body is covered, including the legs and underbody of the animal. While you are spraying the treatment, fluff the hair of the animal so that it spray will not penetrate to the skin. The spray should be applied so that it wets the fur thoroughly, but do not saturate the animal with the treatment. Use protective gloves when you are applying the product and allow enough time for the dog to completely dry.

DO NOT apply product to genetalia. Repeat the treatment every two weeks as necessary.

DO NOT use on puppies that are younger than 12 weeks old and this product cannot be applied to cats or kittens.

FLEE Product Label

FLEE Material Safety Data Sheet (MSDS)

Martin's FLEE Insecticide Spray - 6.5 oz.

This product is a new product released in the Martin's line of pest control products by the manufacturer Control Solutions. It is a long-lasting, fast-acting, waterproof spray that has the same Fipronil active ingredient that is used in Frontline Spray. Martin's Flee Spray provides fast and effective control of fleas and ticks and can be sprayed onto dogs, cats, puppies, and kittens. It is easy to use with a quiet applicator and can be easily applied onto your pet from any angle to treat even hard to reach places. Martin's Flee Spray dries quickly without a lasting odor and will remain active for up to 4 weeks.

Note: May cause moderate eye irritation. Do not spray dog's or cat's eyes or facial area and do not use on puppies or kittens that are younger than 8 weeks of age. Senstivities may occur and if they do, bathe your pet in large amounts of water and mild soap and consult a veterinarian. Consult a veterinarian before using this product on medicated, debilitated, aged, pregant, or nursing animals.

FLEE Product Label

FLEE Material Safety Data Sheet (MSDS)

Martin's FLEE Insecticide Spray - 6.5 oz.

This product is a new product released in the Martin's line of pest control products by the manufacturer Control Solutions. It is a long-lasting, fast-acting, waterproof spray that has the same Fipronil active ingredient that is used in Frontline Spray. Martin's Flee Spray provides fast and effective control of fleas and ticks and can be sprayed onto dogs, cats, puppies, and kittens. It is easy to use with a quiet applicator and can be easily applied onto your pet from any angle to treat even hard to reach places. Martin's Flee Spray dries quickly without a lasting odor and will remain active for up to 4 weeks.

Note: May cause moderate eye irritation. Do not spray dog's or cat's eyes or facial area and do not use on puppies or kittens that are younger than 8 weeks of age. Senstivities may occur and if they do, bathe your pet in large amounts of water and mild soap and consult a veterinarian. Consult a veterinarian before using this product on medicated, debilitated, aged, pregant, or nursing animals.

FLEE Product Label

FLEE Material Safety Data Sheet (MSDS)

Martin's FLEE Insecticide Spray - 12.3 oz.

This product is a new product released in the Martin's line of pest control products by the manufacturer Control Solutions. It is a long-lasting, fast-acting, waterproof spray that has the same Fipronil active ingredient that is used in Frontline Spray. Martin's Flee Spray provides fast and effective control of fleas and ticks and can be sprayed onto dogs, cats, puppies, and kittens. It is easy to use with a quiet applicator and can be easily applied onto your pet from any angle to treat even hard to reach places. Martin's Flee Spray dries quickly without a lasting odor and will remain active for up to 4 weeks.

Note: May cause moderate eye irritation. Do not spray dog's or cat's eyes or facial area and do not use on puppies or kittens that are younger than 8 weeks of age. Senstivities may occur and if they do, bathe your pet in large amounts of water and mild soap and consult a veterinarian. Consult a veterinarian before using this product on medicated, debilitated, aged, pregant, or nursing animals.

FLEE Product Label

FLEE Material Safety Data Sheet (MSDS)

Martin's FLEE Insecticide Spray - 12.3 oz.

This product is a new product released in the Martin's line of pest control products by the manufacturer Control Solutions. It is a long-lasting, fast-acting, waterproof spray that has the same Fipronil active ingredient that is used in Frontline Spray. Martin's Flee Spray provides fast and effective control of fleas and ticks and can be sprayed onto dogs, cats, puppies, and kittens. It is easy to use with a quiet applicator and can be easily applied onto your pet from any angle to treat even hard to reach places. Martin's Flee Spray dries quickly without a lasting odor and will remain active for up to 4 weeks.

Note: May cause moderate eye irritation. Do not spray dog's or cat's eyes or facial area and do not use on puppies or kittens that are younger than 8 weeks of age. Senstivities may occur and if they do, bathe your pet in large amounts of water and mild soap and consult a veterinarian. Consult a veterinarian before using this product on medicated, debilitated, aged, pregant, or nursing animals.

NyGuard Plus Product Label

NyGuard Plus MSDS

NyGuard Plus Document

NyGuard Plus - 17 oz.

NyGuard Plus is a new and unique product that allows you to control all stages of both ticks and fleas. It's a unique product because it not only kills and controls these pests, but it also provides a pet odor neutralizer. The formula has four separate features that combines a pyrethroid active ingredient, an insect growth regulator ingredient, and a synergist making this one of the most efficient products on the market for flea and tick control.

For flea control, it is important to vacuum thoroughly before beginning treatment and to continue to vacuum and maintain the area of infestation. Because not all fleas will have died in the vacuum bag, dispose of the bag in a air-tight bag.

Although NyGuard Plus primarily controls fleas and ticks, it is a versatile insecticide that can be used as part of the control program for cockroach, dust mite, carpet beetle, and lice infestations. Refer to the product label before you apply any pesticide for a complete list of target pests. Also refer to the product label for complete application instructions.

NOTE:
Shake well before application.
It is NOT a product that can be sprayed directly onto pets or people.

NyGuard Plus Product Label

NyGuard Plus MSDS

NyGuard Plus Document

NyGuard Plus - 17 oz.

NyGuard Plus is a new and unique product that allows you to control all stages of both ticks and fleas. It's a unique product because it not only kills and controls these pests, but it also provides a pet odor neutralizer. The formula has four separate features that combines a pyrethroid active ingredient, an insect growth regulator ingredient, and a synergist making this one of the most efficient products on the market for flea and tick control.

For flea control, it is important to vacuum thoroughly before beginning treatment and to continue to vacuum and maintain the area of infestation. Because not all fleas will have died in the vacuum bag, dispose of the bag in a air-tight bag.

Although NyGuard Plus primarily controls fleas and ticks, it is a versatile insecticide that can be used as part of the control program for cockroach, dust mite, carpet beetle, and lice infestations. Refer to the product label before you apply any pesticide for a complete list of target pests. Also refer to the product label for complete application instructions.

NOTE:
Shake well before application.
It is NOT a product that can be sprayed directly onto pets or people.

Optimate CS Product Label

Optimate CS MSDS

Optimate CS - 1 oz.

CSI Optimate CS is a microencapsulated insecticide that controls listed pests on a variety of areas. It can be used a general surface treatment as well as a crack/crevice or spot treatment in areas like in or around buildings, parks, on plants, and etc. Optimate CS utilizes a CapVantage Technology that utilizes a powerful active ingredient that is a single, biologically active isomer, which allows for the same strength delivery, but only uses half the use rate of a regular Lamba-Cyhalothrin active ingredient based product. For example, in a university testing, Gamma-cyhalothrin (the active ingredient in Optimate CS) killed 100% of big-headed ants over twice as fast after 4 weeks than the frequently used Lambda-Cyhalothrin active ingredient based product.

Use Optimate CS on and around buildings and structures and control listed pests on lawns, ornamental trees and shrubs, around residential, institutional, public, commercial, agricultural, and industrial buildings as well as in other areas like parks, recreational areas, and athletic fields.

Optimate CS Product Label

Optimate CS MSDS

Optimate CS - 1 oz.

CSI Optimate CS is a microencapsulated insecticide that controls listed pests on a variety of areas. It can be used a general surface treatment as well as a crack/crevice or spot treatment in areas like in or around buildings, parks, on plants, and etc. Optimate CS utilizes a CapVantage Technology that utilizes a powerful active ingredient that is a single, biologically active isomer, which allows for the same strength delivery, but only uses half the use rate of a regular Lamba-Cyhalothrin active ingredient based product. For example, in a university testing, Gamma-cyhalothrin (the active ingredient in Optimate CS) killed 100% of big-headed ants over twice as fast after 4 weeks than the frequently used Lambda-Cyhalothrin active ingredient based product.

Use Optimate CS on and around buildings and structures and control listed pests on lawns, ornamental trees and shrubs, around residential, institutional, public, commercial, agricultural, and industrial buildings as well as in other areas like parks, recreational areas, and athletic fields.

Optimate CS Product Label

Optimate CS MSDS

Optimate CS - 16 oz.

CSI Optimate CS is a microencapsulated insecticide that controls listed pests on a variety of areas. It can be used a general surface treatment as well as a crack/crevice or spot treatment in areas like in or around buildings, parks, on plants, and etc. Optimate CS utilizes a CapVantage Technology that utilizes a powerful active ingredient that is a single, biologically active isomer, which allows for the same strength delivery, but only uses half the use rate of a regular Lamba-Cyhalothrin active ingredient based product. For example, in a university testing, Gamma-cyhalothrin (the active ingredient in Optimate CS) killed 100% of big-headed ants over twice as fast after 4 weeks than the frequently used Lambda-Cyhalothrin active ingredient based product.

Use Optimate CS on and around buildings and structures and control listed pests on lawns, ornamental trees and shrubs, around residential, institutional, public, commercial, agricultural, and industrial buildings as well as in other areas like parks, recreational areas, and athletic fields.

Optimate CS Product Label

Optimate CS MSDS

Optimate CS - 16 oz.

CSI Optimate CS is a microencapsulated insecticide that controls listed pests on a variety of areas. It can be used a general surface treatment as well as a crack/crevice or spot treatment in areas like in or around buildings, parks, on plants, and etc. Optimate CS utilizes a CapVantage Technology that utilizes a powerful active ingredient that is a single, biologically active isomer, which allows for the same strength delivery, but only uses half the use rate of a regular Lamba-Cyhalothrin active ingredient based product. For example, in a university testing, Gamma-cyhalothrin (the active ingredient in Optimate CS) killed 100% of big-headed ants over twice as fast after 4 weeks than the frequently used Lambda-Cyhalothrin active ingredient based product.

Use Optimate CS on and around buildings and structures and control listed pests on lawns, ornamental trees and shrubs, around residential, institutional, public, commercial, agricultural, and industrial buildings as well as in other areas like parks, recreational areas, and athletic fields.