PT 565 XLO Product Label

PT 565 XLO Material Safety Data Sheet (MSDS)

565 Plus XLO Contact Insecticide Pest Control 20oz Can

Whitmire Micro-Gen's 565 Plus XLO Contact Insecticide Pest Control is the perfect insect control solution. The insecticide contains the botanical insecticide Pyrethrin, an organic compound with potent insecticidal properties.

Why Should You Use 565 Plus XLO Contact Insecticide Pest Control?

565 Plus XLO covers an extensive range of bugs and a 20 oz. aerosol can cover approximately 1500 square feet of space.

Directions for 565 Plus XLO Contact Insecticide Pest Control 20oz Can Use

565 Plus XLO can be used for direct contact kills or space treatments. The product can be used indoors or outdoors to treat areas infested by insects.

Where to Apply 565 Plus XLO Contact Insecticide Pest Control 20oz Can

Apply 565 Plus XLO in apartments, homes, campgrounds, hotels, storage areas, schools, transports, supermarkets, commercial buildings and industrial buildings.

Indoor Applications

For space treatments, first calculate the size of the space to be treated. Turn off air conditioners and close all windows and doors and spray the enclosed area by directing the insecticide mist upwards. Spray at the rate of 1 to 3 seconds per 1000 cu. ft. of enclosed space and keep the area closed for at least 15 minutes for maximum effectiveness. Before reoccupying, ventilate the treated area.

For direct contact applications, place the injector tip at the can nozzle and spray on cracks and crevices frequented by insects. Spray at rates depending on applications. Spray additional amounts if necessary or when the infestation seems heavy. Please consult the Material Safety Data Sheet for the specifics.

Outdoor Applications

For outdoor treatments, spray only at wind speeds below 6 miles per hour. Repeat if necessary. Spray directly into mud dauber and wasp nests by holding the container 18" away.

Advance 375A Product Label

Advance 375A Material Safety Data Sheet (MSDS)

Advance 375A Select Granular Ant Bait - 8 oz.

Advance 375A Select Granular Ant Bait is specially formulated to kill common species of ants. The product contains Abamectin B1, a potent insecticide which is highly toxic to most insects including ants. The ant bait has a granular form which can be applied directly on to infested areas. Each pound of the product covers an acre of surface, suitable for use in lawns, backyards, in and around buildings.

Why Should You Use Advance 375A Select Granular Ant Bait ?

The product contains a slow-acting insecticide that is highly effective in controlling ant populations. Each 8 oz. bottle has enough granules to cover half an acre of surface area.

Directions for Advance 375A Select Granular Ant Bait Use

Use the product by sprinkling bait granules directly on to infested areas, ant trails and mounds. Please refer to the product label for application instructions.

Where to Apply Advance 375A Select Granular Ant Bait

Apply the product in and around homes, residential areas, commercial buildings, warehouses, food storage areas, garages, lawns and other inhabited areas. Avoid using the product in areas where food is processed and consumed such as dining rooms and kitchens.

Indoor Applications

Trace the infestation source by following the ant movements. Sprinkle adequate amounts of bait near cracks or crevices where ants congregate. Use application equipment or tools if necessary to induce the bait in voids. Pestmall offers such tools which can be found here.

Outdoor Applications

In broadcast applications, spread the bait evenly or in pockets in areas where ants thrive. An 8 oz. pack of the product can cover approximately half an acre of surface.

To protect structures, create a bait band measuring 1 to 2 feet around building foundations. Treat ant trails by placing small deposits of ant bait along the trail.

If ant colonies are located, apply 1.5-2.1 oz. of the product around of each mound.

Alpine Dust Product Label

Alpine Dust Material Safety Data Sheet (MSDS)

How to Applying Dust Insecticide

Alpine Dust Insecticide - 3 lbs

Alpine Dust Insecticide is a direct contact insecticide in powder form. Like other Alpine products, the dust insecticide contains the non-repellent insecticide Dinotefuran. Alpine Dust Insecticide is tested and proven to control ants, cockroaches, bed bugs, beetles, fleas, moths, spiders, flies, wasps, millipedes and centipedes.

Why Should You Use Alpine Dust Insecticide?

Alpine Dust Insecticide provides a quick knockdown to a wide range of controllable pests. A 3 lb bag of the product covers approximately 3000 square feet.

Directions for Alpine Dust Insecticide Use

Product can be applied by hand or by the use of dusters and other similar equipment to ensure uniform applications. Spread the product evenly on to infested areas following the recommended application rates found in the product label. Apply 0.15 to 0.30 oz. of the product per square yard of surface area.

Please read the product label for application instructions and the recommended application rates. Pestmall offers Centrobulb Dusters and Bellow Dusters needed to apply Alpine Dust Insecticides.

Do not apply the product to surfaces where food is processed such as kitchen tables and sinks.

Do not treat pets or pet beddings with the product. Replace beddings after treating the area.

Please read the product label for application instructions and the recommended application rates. Pestmall offers Centrobulb Dusters and Bellow Dusters needed to apply Alpine Dust Insecticides.

Where to Apply Alpine Dust Insecticide

Alpine Dust Insecticide is for use in and around residential, commercial and industrial buildings. Apply thoroughly and evenly to infested areas, cracks and crevices, nests, voids, corners, under sinks and shelves, storage areas and other places where insects congregate, nest and hide.

For perimeter applications, sprinkle the product around insect entry holes such as structural cracks and crevices, window sills, patios, porches and other areas where insects have access to the building.

Alpine Pressurized Insecticide Product Label

Alpine Pressurized Insecticide Material Safety Data Sheet (MSDS)

Alpine Pressurized Insecticide Spray - 20 oz

Developed by Whitmire-Micro Gen Laboratories, the Alpine line of pest control products contain Dinotefuran. The Alpine Insecticide Spray is unusually effective for it contains high concentrations of the potent insecticide. In atomized form, the pesticide provides a quick killing action against pests. Alpine Pressurized insecticide spray is a must-have for homes for quick and effective control of common pest insects.

Why Should You Use?

Alpine Insecticide Spray is safe to use in and around residential spaces and has been granted by the EPA a Reduced Risk status.

Directions for Use

Shake well the Alpine Insecticide aerosol can before applications. Alpine Insecticide Spray can be used for direct contact kills, crack and crevice treatments, spot treatments and space treatments. The product is ideal for use indoors or outdoors to treat infested sites, nests and areas harboring insects. Hold the product upright and direct the nozzle 12 inches away from insects/surfaces to be treated. For direct contact applications, direct the nozzle towards insects and away from persons. When treating surfaces, Treat infFor crack and crevice treatments, use the supplied actuator to apply the product inside to voids, cracks, crevices holes and other insect-harboring sites. Please read the product label for application instructions and safety precautions. Use the product as directed in the product label. Do NOT apply the product to food-handling surfaces.

Where to Apply

Alpine Pressurized Insecticide spray is for use in and around apartments, campgrounds, homes, hospitals, hotels, nursing homes, resorts, schools, warehouses, commercial buildings and industrial buildings.

Ant Cafe Refillable Bait Station Tips

Ant Caf1/4 Refillable Bait Station - 1 Bag / 48 Stations

Innovative Pest Control Solution introduces Ant Caf1/4 Refillable Bait stations for ant control. The highly versatile stations can be used with liquid or dry baits. In addition, each station has precut holes that can accommodate small ants and even cockroaches. Made from tough polypropylene, Ant Caf1/4 Bait Stations have a spill-proof design for handling liquid baits. The stations are also constructed to prevent bait contaminations, blend with their surroundings and provide easy anchorage to structures.

Why Should You Use?

In addition to ants, this versatile product can be used to bait cockroaches and other insects just by replacing the type of bait.

Directions for Use

Ant Caf1/4 Refillable Bait Stations supports both liquid and granular baits. Stations have ⅛-inch precut holes located in the hinged end, ideal for limiting liquid bait evaporations. The diameter of these holes can be increased to 1/4 inches to support granular baits or allow access to larger ants/insects.

Before applications, carefully read the bait product labels before filling the stations with bait. Fill the stations with the appropriate kind of bait by opening the hinged end. DO NOT use two kinds of bait in a single station. Close the lid to secure the bait inside the station. Anchor bait stations to ant harborage sites using tapes, ties or adhesives. Space each bait station as recommended.

Where to Apply

Use Ant Caf1/4 Refillable Bait Stations indoors and outdoors. The product is for use in and around residential, commercial, public and industrial structures.

Ants-No-More Brochure

Ant No More Ant Bait Station

Ant No More Ant Bait Stations are versatile bait stations that can handle granular, gel and liquid ant baits. The product features a tamper-resistant lid designed to keep children and pets from accessing the toxic baits. With two bait compartments, different kinds of bait can be used for effective control of ants. Ant No More Ant Bait Stations have stake designs for easy placement in soils. Made from polypropylene, bait stations are waterproof and UV-resistant to keep baits fresh and effective.

Why Should You Use Ant No More Ant Bait Station?

Ant No More Bait Station is made from durable polypropylene that can withstand tough weather conditions. Green in color, the product easily blends with its surroundings.

Directions for Ant No More Ant Bait Station Use

Open the bait station by lining up the arrow on the body and the center mark on the lift tab. Push up the lid and push back across the opening to pop up the lid. It is recommended to use two types of bait for effective ant control. The product has two bait compartments, fill the first compartment with one kind of bait and fill the second with another. DO NOT place two different baits in a single compartment. Certain baits are rendered ineffective when mixed with other baits. Snap the lid back in place. Place the bait stations to areas where foraging ants are seen.

Where to Apply Ant No More Ant Bait Station

Ant No More Ant Bait Stations is for use around homes, buildings, lawns, shrubs, trees, flower beds, planter boxes and other areas infested by ants.

PT Ascend Product Label

PT Ascend Material Safety Data Sheet (MSDS)

Ascend Fire Ant Bait - 2 lb.

Ascend Fire Ant Bait is specially formulated to control fire ants, pharaoh ants and related species. With low active ingredient concentration, the bait gives worker ants sufficient time to transfer the bait to their colonies. The bait is then consumed by the inhabitants of the colony and eventually the queen ant. When the queen dies, the colony's ability to reproduce is impaired and ant numbers dwindle as the bait works on each ant.

Why Should You Use Ascend Fire Ant Bait ?

Ascend Fire Ant Bait is proven to eliminate entire ant colonies when used as directed.

Directions for Ascend Fire Ant Bait

Apply the product evenly over treatment areas using granular spreaders and other application equipment. It is recommended to apply the product when ants are actively foraging usually when soil temperatures are greater than 60°F. Use the product for broadcast applications, individual mound treatments and crack and crevice applications. For broadcast applications, spread the product uniformly over infested areas at a rate of 1 lb/acre. For individual mounds, apply 5 to 7 tablespoons of the bait over ant mounds. Spread the product evenly over mounds and extend two feet from its base. DO NOT use the product in food handling areas and surfaces. For indoor applications, first locate areas with high ant activity. Using dusters, apply 5 tablespoons of the product to cracks and crevices and other sites that harbor insects.

here to Apply Ascend Fire Ant Bait

Ascend Fire Ant Bait is labeled for use outdoors on turf, parks, golf courses and other non-crop areas. The product can also be used indoors in homes, apartments, food storage areas, hotels, motels, schools, hospitals, industrial buildings and commercial buildings.

Bifen IT Product Label

Bifen IT Material Safety Data Sheet (MSDS)

BIFEN I/T - 1 Pint

Bifen I/T (Insecticide/Termiticide) is one of the most potent insecticides in the market. With 7.9% Bifenthrin, the product is highly effective in controlling a wide variety of pest insects, including various species of subterranean termites. Bifen I/T is specially formulated to control termite and insect infestations around commercial, residential and industrial structures.

Why Should You Use BIFEN I/T ?

Bifen I/T contains high concentrations of Bifenthrin to control and prevent termite and insect infestations. In addition, the product leaves a long-lasting residual effect that last for months.

Directions for BIFEN I/T Use

Applying Bifen I/T requires the use of suitable application equipment and personal protective equipment. The product is extremely toxic. Please refer to the product label before using or handling the product. Please read the product label for information on treatments, dilutions and application methods. Depending on the target pest and the method of application, Bifen I/T should be applied using the correct methods as stated in the product label. The product can be used for broadcast treatments, perimeter treatments, crack and crevice applications, sub-slab injections and residual barrier treatments. For subterranean termite control, methods may be employed such as trenching, rodding, crack and crevice injection or absorption for effective control.

Bifen I/T can also be used to control Armyworms, Cutworms, Sod Webworms, Annual Bluegrass Weevils, Billbugs, Black Turfgrass Ataenius, Leafhoppers, Mealybugs, Ants, Centipedes, Chinch Bugs, Fleas , Imported Fire Ants, Millipedes, Mole Crickets, Ticks, Pillbugs, Sowbugs and European Crane Flies. Please read the product label for directions and mixing instructions.

Where to Apply BIFEN I/T

Use Bifen I/T to treat infested areas in and around residential, commercial, public and industrial buildings. The product is for use in lawns, parks, recreational areas and athletic fields.

CB Borid Boric Acid Dust Product Label

CB Borid Boric Acid Dust Material Safety Data Sheet (MSDS)

How to Apply Dust Insecticides

CB Borid Boric Acid Dust

Proven Control of Crawling Insects in Commercial and Residential Locations

CB Borid Boric Acid Dust is a natural product that uses a contact kill and knock-down method like all other dusts. CB Borid Boric Acid Dust provides long-term treatment and remains effective as long as it remains dry and accessible to insects. Depending on the pest, CB Boric Borid Acid Dust will either kill the pest the minute they touch or it will allow the pest to carry the dust back to its colony, exposing the colony to the dust. CB Borid Boric Acid can be used either indoors or outdoors; simply apply small amounts using a tool or application tip. No dust should be visible, so make sure to brush the remaining dust into the cracks or crevices. When using CB Borid Boric Acid Dust, remember to be careful around children or pets.

Useful Tips You May Need to Know

The dust application is simple. However, when using dust, please be cautious, especially when children and pets are present. Use dust only in areas where they cannot reach. Apply lightly and uniformly to infested area. Do NOT overuse dust. The large amount of dust would repel insects. We recommend applying CB Borid Boric Acid Dust with a Bellow duster or a Centrobulb duster for best application.

For Use in and around: Homes, Restaurants, Grocery Stores, Schools, Warehouses, Mobile Homes, Hotels, Offices, Apartments, Attics, Nursing Homes, Ships, Yachts, Buses, Kennels, Zoos, New Building Construction, Sewers and Hospitals

Apply CB Borid Boric Acid Dust liberally in areas where cockroaches hide or nest:

- Under and behind appliances.
- In plumbing voids accessible through holes, around plumbing and drains.
- In void areas under kitchen and bathroom cabinets (Note: Many cabinets have a gap at the top of the kickplate which offers easy access. If not, drill a small hole at the top of the kickplate).
- In drawer wells of cabinets.
- In cracks around windows, doors, baseplates, fixtures and cabinets.
- In utility rooms, under and behind hot water heaters, washers and dryers. Be sure to dust plumbing voids.
- In attics, around the perimeter and vent pipes, above kitchens and baths.
- Around the perimeter of dropped ceilings.
- Into pits of elevator sharfs, dumbwaiters and trash chutes.
- Under and behind pallets and boxes in storerooms.

DIRECTIONS FOR USE OF CB BORID BORIC ACID

WITHIN FOOD AREAS AND NON-FOOD AREAS OF FOOD HANDLING ESTABLISHMENTS FOOD HANDLING ESTABLISHMENTS:

In places other than private residences in which exposed food is held, processed, prepared, or served, care should be taken to avoid depositing the product onto unwanted areas and items. Avoid contaminating food or food processing surfaces with CB Borid Boric Acid Dust.

APPLICATIONS OF CB BORID BORIC ACID IN THE FOOD AREA OF FOOD HANDLING ESTABLISHMENTS OTHER THAN AS A CRACK AND CREVICE TREATMENT ARE NOT PERMITTED.

Apply CB Borid Boric Acid Dust in small amounts directly into cracks and crevices using a bellows duster or other suitable equipment capable of applying insecticide directly. Includes areas for receiving, storage, acking (canning, bottling, wrapping, boxing), preparing, edible waste storage, and enclosed processing systems (mills, dairies, edible oils, syrups). Serving areas, when food is exposed and facility is in operation, also would be considered a food area.

SERVING AREAS:

Facilities where prepared foods are served, such as dining room, but excluding areas where food may be prepared or held. Apply CB Borid Boric Acid Dust as a spot treatment to selective surfaces such as baseboards or under elements of constructions into cracks and crevices. Avoid treating surfaces likely to be contacted by food. (Do not apply CB Borid Boric Acid Dust when facility is in operation or foods are exposed.)

NON-FOOD AREAS:

Includes garbage rooms, lavatories, floor drains (to sewer entries and vestibules), offices, locker rooms, machine rooms, boiler rooms, garages, mop closets, and storage (after canning or bottling). Apply to baseboard areas, around water pipes, surfaces behind and beneath sinks, lockers, tables, pallets, and similar areas where insects hide or through which they may enter.

SEWER TREATMENT:

Apply CB Borid Boric Acid Dust using portable blowers or air pressure tanks at a rate that does not exceed 8 pounds per 3,000 square feet.

PRETREATMENT OF NEW CONSTRUCTION (Preventive treatment for cockroaches and drywood termites):

Apply CB Borid Boric Acid Dust to baseplates and plumbing voids at the rate of 4 pounds per 1,000 square feet. In attics, apply powder around perimeter of attics and around vent stacks at the rate of 4 pounds per 1,000 square feet.

POULTRY HOUSES-TO CONTROL DARKLING BEETLES:

Remove birds before applying product. Apply CB Borid Boric Acid Dust at the rate of 1 to 2 pounds per 100 square feet over old litter or soil surface of the poultry house. Also apply to the posts, walls, framing, and insulation of the poultry house. Do not apply CB Borid Boric Acid Dust directly to manure. Evenly spread fresh litter a minimum of four inches over all treated floor surfaces before introducing birds. Reapply CB Borid Boric Acid Dust after each grow-out period or after each sanitizing and cleaning of the poultry containment area in order to have good beetle control.

Catalyst Product Label

Catalyst Material Safety Data Sheet (MSDS)

Catalyst Insecticide - Pint

Catalyst Insecticide is a water-based insecticide containing 18.9% Propetamphos. Recommended for tough infestations, Catalyst provides residual control of several pest insects. The product contains a water-soluble plastic that creates a non-staining and long lasting residue for extended control. Catalyst is a non-repellent contact insecticide that provides a quick knockdown to target pests, making it an ideal product to complement baits.

Why Should You Use Catalyst Insecticide?

Catalyst Insecticide is a powerful contact insecticide that provides quick knockdown and residual control of target pests.

Directions for Catalyst Insecticide Use

Catalyst Insecticide is limited to crack and crevice treatments only. Please refer to the product label for information on the limits of its use. Crack and crevice treatments require solutions that contain 0.5% active ingredient content. Mix 3.2 ounces of Catalyst Insecticide in one gallon of water to produce a diluted solution. Using appropriate spray equipment, apply the solution to cracks, crevices, voids, entry points and other sites providing harborage to insects.

Do NOT use the diluted solution as a space spray.

Where to Apply Catalyst Insecticide

Catalyst Insecticide is for indoor use only. The use of this product is limited to food and non-food handling areas of food service establishments, office buildings, commercial buildings, industrial buildings, warehouses. The product is not for use in residential areas occupied by children and the elderly.

CB Intruder HPX Product Label

CB Intruder HPX Material Safety Data Sheet (MSDS)

CB Intruder HPX - 14 oz.

CB Intruder HPX-15 Residual with Cyfluthrin provides fast knockdown with 4-8 week residual action. CB Intruder HPX-15 Residual with Cyfluthrin is ideal for crack and crevice control in food handling areas.

Please refer to and follow the instruction on the CB Intruder HPX Product label.

CB-80 Extra Product Label

CB-80 Extra Material Safety Data Sheet (MSDS)

CB-80 Extra aerosol - 17 oz.

CB-80 Extra is today's best-selling contact-kill insecticide used by all the pro's in the industry. CB-80 provides extra-fast knockdown and elimination of most common pests. The ingredients in CB-80 Extra are safe enough to be used in food handling establishments, such as restaurants, supermarkets, and farms as well as residential and commercial establishments.

Why Should You Use CB-80 EXTRA?

CB-80 EXTRA is unparrallelled in proving fast knockdown to a number of household pests including flies, mosquitoes, cockroaches. Excellent for use as a space spray, CB-80 contains no harmful chemicals and is safe to use in food storage areas to treat pantry pests. Licensed by the USDA for use in Federally Inspected Meat and Poultry Plants, the product can also be used to treat animals and animal facilities

Directions for CB-80 EXTRA Use

CB-80 can be used as an indoor surface/contact spray, space spray or as a crack and crevice spray. When using the product to treat spaces, first calculate the size of the space to be treated and spray at rates recommended in the product label. For crack and crevice treatments, calculate the volume of the void and treat using the supplied crack and crevice nozzle. Spray towards areas where insects frequent, hide and congregate. Treated areas/spaces must be ventilated before reoccupying.

FOR CONTROL OF FLYING INSECTS SUCH AS FLIES, GNATS, MOSQUITOES, MOTHS AND WASPS - Calculate the volume of the space to be treated and apply at the rate of 2 to 3 seconds per 1,000 cubic feet.

FOR CRAWLING INSECTS SUCH AS COCKROACHES, ANTS AND SPIDERS -Before applications, turn off air conditioners and close all doors and windows. Treat hiding spaces such as cabinets, under sinks, cracks and crevices, behind appliances, along plumbing, baseboards and floors. Hit the insects whenever possible. Spray CB-80 for 20 seconds per 1,000 cu. ft. of space. Keep treated areas closed for 15 minutes. Open and ventilate areas before reoccupying.

FOR PANTRY PESTS LIKE CONFUSED FLOUR BEETLES, SAWTOOTH GRAIN BEETLES, GRANARY WEEVILS, RICE WEEVILS, RED FLOUR BEETLES AND GRAIN MOTHS - Exposed or infested food products should be disposed of before treatments. Spray cracks and crevices, food containers and other areas where insects are seen. Spray surfaces at the rate of 30 seconds per 100 square feet. Keep the area closed for 45 to 60 minutes.

FOR DAIRY FARM, HORSE BARN, CATTLE, HOG AND POULTRY OPERATIONS - Close all doors and windows before treating the area. Cover Spray at the rate of 2-3 seconds per 1,000 cubic feet of space. Evacuate the treated area and keep it closed for 15 minutes. Treat these areas daily or as necessary.

TREATMENT OF ANIMALS (COW, HORSE AND SWINE) - Thoroughly spray over the entire animal from a distance of 2 feet. Do NOT spray directly towards the animal's face or eyes. Treat animals daily or if necessary.

Carefully read the product label for application instructions and precautions.

Where to Apply CB-80 EXTRA

CB-80 EXTRA is for use in: Homes, Apartments, Offices, Hotels, Hospitals, Schools, Nursing Homes, Day Care Centers, Warehouses, Stores, Restaurants, Food Handling Establishments, Food Processing Plants, Transportation Equipment, Barns, Stables, Farms, Animal Quarters, Milking Rooms and Poultry Houses.

CB Air Devil HPX Product Label

CB Air Devil HPX Material Safety Data Sheet (MSDS)

CB Air Devil HPX - 14 oz.

CB Air Devil HPX is an instant contact kill aerosol that also eliminates large number of pests. After the CB Air Devil HPX aerosol is used the protection will last up to 3 months.

Advantages of CB Air Devil HPX

Residual action provides up to 3 months of insect control
Specially developed to clear out large numbers of target insects fast
Quick knockdown plus low environmental impact

CB AIR DEVIL HPX IS FOR USE IN:

Homes, Laboratories, Kennels, Aircraft (cargo area), Buses, Apartments, Offices and the non-food/feed areas of Restaurants, Dairies, Milk Storage Rooms, Supermarkets, Hospitals (non-occupied patient areas), Egg Processing Plants, Bakeries, Bottling Plants, Institutions, Hotels, Motels, Stables, Schools, Nursing Homes (non occupied patient areas), Stores, Warehouses, Nurseries, Food Manufacturing, Processing and Servicing Establishments; Trucks, Trailers, Vessels, Railcars; Commercial, Industrial and Storage Buildings .

CB AIR DEVIL HPX FOR RESIDUAL PEST CONTROL :

Homes, laboratories; NON-FOOD/NON-FEED AREAS restaurants, dairies, milk storage rooms, supermarkets, hospitals (nonoccupied patient areas), nursing homes (nonoccupied patient areas), egg processing plants, bakeries, bottling plants, institutions, hotels, motels, kennels, stables, schools, nurseries, stores, warehouses, food manufacturing, processing and servicing establishments; Transportation aircraft (cargo area), buses, trucks, trailers, vessels, railcars; Storage commercial, industrial, apartment, office and storage buildings.

CB AIR DEVIL HPX FOR CRACK AND CREVICE APPLICATION:

Cockroaches, Spiders, Crickets, Silverfish, Firebrats use injector tip, releasing approximately 1 second spray per spot. For serious infestations, spray spots approximately 12 inches apart; for light infestations, spray approximately 3 feet apart. Spray into hiding places such as cracks, crevices, openings around pipes and sinks, under refrigerators, behind baseboards, coffee makers, meter boxes, and manholes. Spray directly on insects in these locations where possible. Repeat as necessary.

CB AIR DEVIL HPX IN FOOD HANDLING ESTABLISHMENTS:

Places other than private residences in which food is held, processed, prepared or served.
Non-food Areas: This product may be used as a general spot or crack and crevice treatment in non-food areas. All areas where insects hide or through which insects may enter should be treated. Non-food areas are areas such as garbage rooms, lavatories, floor drains (to sewers), entries and vestibules, offices, locker rooms, machine rooms, boiler rooms, garages, mop closets and storage (after canning or bottling).

Food Areas: Do not use in food/feed areas of food/feed handling establishments, restaurants, or other areas where food/feed is commercially prepared or processed. Do not use in serving areas while food/feed is exposed or facility is in operation. Serving areas are areas where prepared foods are served such as dining rooms but excluding areas where food may be prepared or held. In the home, all food processing surfaces and utensils should be covered during treatment or thoroughly washed before use. Exposed food should be covered or removed.

CRAWLING INSECTS:Sowbugs, Pillbugs, Millipedes, and Centipedes apply around doors and windows and other places where these pests may be found or where they may enter premises. Spray baseboards, storage areas and other locations. Repeat as necessary. See outdoor use below. ANTS: Apply to any trails, around doors and windows and other places where ants may be found.

WOOD DESTROYING INSECTS: Treat wood suspected of harboring all species of Termites, Carpenter Ants and Carpenter Bees. The purpose of such application of Air Devil Residual is to kill workers or winged form which may be present in the treated channels at the time of treatment and to impact a temporary resistance at these places to attack which may aid in the prevention of immediate reinfestation. Such applications are not a substitute for mechanical alternation, soil treatment or foundation treatment but merely a supplement. Localized treatment of wood-infesting insects locate suspected infestation and/or insect tunnels and cavities. Inject 5 to 10 seconds of spray into insect tunnels, galleries and inaccessible closed voids. In infested sites, pilot holes should be drilled eight to ten inches apart to insure thorough insecticide gallery treatment. Make sure not to contact electrical wiring, plumbing, etc., when drilling. Use available application equipment. For Carpenter Bees, seal entrance openings with small pieces of stainless steel wool after application.

CB AIR DEVIL HPX FOR OUTDOORS:

For control of Ants, Bees, Centipedes, Cockroaches, Crickets, Firebrats, Millipedes, Silverfish, Sowbugs, Pillbugs, Spiders, Flies,and Wasps apply as a residual spray to surfaces of refuse dumps and similar areas where these pests are found.

Conquer Product Label

Conquer Material Safety Data Sheet (MSDS)

Conquer Liquid Insecticide - 1 Pint

Widely used by PMPs due to its effectiveness, Conquer Insecticide is a general-use insecticide that targets hundreds of pest insects and provides lasting residues to prevent future infestations. The product's active ingredient is Estenvalerqate, a synthetic pyrethroid insecticide that is highly toxic to numerous pest insects even in low concentrations. Be a conqueror! Conquer pest infestations using Conquer Insecticide.

Why Should You Use Conquer Liquid Insecticide?

Conquer Insecticide covers a broad spectrum of controllable insects. The product is very economical, effective and long lasting.

Directions for Conquer Liquid Insecticide Use

Conquer Residual Insecticide concentrate may be diluted in water or oil. For general applications, mix one or two fluid ounces of Conquer EC with one gallon of water or oil. For light infestations, apply solutions containing 0.027% of the active ingredient (made by mixing one fluid ounce of Conquer CS with one gallon of water). Increase the active ingredient concentration when treating heavy infestations. Mix 2 fl. oz. of Conquer EC to a gallon of water to produce a solution containing 0.05% Estenvalergate. Apply solutions using appropriate spray equipment. Please read the product label for insect-specific control instructions.

Where to Apply Conquer Liquid Insecticide

Conquer Insecticide is for use in and around homes, apartments, schools, warehouses, office buildings, hotels, kennels, lawns, commercial buildings and industrial buildings.

Please refer to and follow the instructions on the product label.

Crack & Crevice II with Propoxur Product Label

Crack & Crevice II with Propoxur Material Safety Data Sheet (MSDS)

Crack & Crevice II Propoxur - 14 oz.

Crack & Crevice II with Propoxur is an insecticide that provides quick knockdown and long-lasting residual protection against crawling insect infestation with its superior formulation. It is ideal for direct contact kill, spot treatments and crack and crevice treatments in both residential and commercial locations, which include food handling areas. Crack & Crevice is easy to use, and can be applied upside-down, and right-side-up without leaking. Alternating with Crack & Crevice I will maximize the effect of crawling pest control.

For Use in and around: Apartments, Homes, Hospitals, Hotels, Food Storage Areas, Meat Packing Plants, Food Processing Plants, Motels, Nursing Homes, Restaurants and Other Food Handling Establishments, Supermarkets, Transportation Equipment (Buses, Boats, Ships, Trains and Planes), Warehouses and Other Commercial and Industrial Buildings.

Crack & Crevice Treatment:

Use Crack & Crevice II Propoxur with the supplied actuator and injection tubes. Inject Crack & Crevice II Propoxur into cracks and crevices or void spaces where insects may be harboring, living, and breeding. Place injector tip into cracks, crevices, holes, and other small openings where insects may enter. Spray into inaccessible areas behind and beneath sinks, stoves, cabinets, refrigerators, damp areas, and in and around waste containers.

Spot Treatment:

Use with the supplied actuator and injection tubes. Direct nozzle approximately 12 inches from surface to be treated. Apply directly on insects in these locations when possible.

Indoor Treatment:

Crawling Insects - Cockroaches, Dermestids, Scorpions, Spiders, Earwigs, Crickets, Sowbugs, Millipedes, Centipedes: Apply as a spot treatment or crack & crevice treatment. Spray into hiding places such as cracks and crevices, moist areas, openings around pipes and sinks, under refrigerators, behind baseboards, coffee makers, meter boxes, and manholes. Spray directly on insects in these locations where possible. Repeat as necessary

BOOKLICE & SILVERFISH: Spray cracks and crevices in baseboards, doorframes, bookcases, and storage areas. Spray directly on insects in these locations where possible. Repeat as necessary.

ANTS: Apply as a spot treatment or crack & crevice treatment. Spray into nests, trails, around doors, windows, into structural cracks and crevices, and wherever ants enter house. Spray directly on insects in these locations where possible. Repeat as necessary. Do not treat entire area of floor or floor covering.

Localized treatment of wood destroying insects:

CARPENTER ANTS and CARPENTER BEES: Locate source of infestation. Inject 5-10 seconds of spray into insect tunnels and cavities.

CARPENTER BEES: Seal entrance openings with small pieces of stainless steel wool after spray application.

TERMITES: Locate source of infestation. Apply to voids and channels in damaged wooden members of a structure or to cracks, spaces or bearing joints between wooden members of a structure. Inject 5-10 seconds spray into insect tunnels and cavities. This application is not a substitute for mechanical alteration, soil treatment, or foundation treatment but is merely a supplemental treatment. This product is intended to kill workers or winged reproductive forms which may be present in the treated areas.

Cy-Kick CS Insecticide Product Label

Cy-Kick CS Insecticide Material Safety Data Sheet (MSDS)

Cy-Kick CS Insecticide - 1 pint

Cy-Kick CS is a liquid insecticide with a 6.0% Cyfluthrin concentration. This fast-acting and long-lasting active ingredient effectively eliminates pests and provides a formidable barrier against future infestations indoors and outdoors. Using microencapsulation technology, Cy-Kick CS not only kills pest fast, its effects also lasts. Properly applied, Cy-Kick CS guarantees to provide your home a long-lasting pest protection for up to 3 months.

Why Should You Use Cy-Kick CS?

Cy-Kick CS is one of the best selling liquid insecticides trusted by professionals for its broad spectrum label, long residual life and effeciency.

Directions for Cy-Kick CS Use

First check the spraying equipment to be used in applying Cy-Kick CS and make sure that the equipment is clean and functioning. For your spraying equipment needs, PestMall offers a wide range of spraying equipment which can be found here.

Shake vigorously a pint of Cy-Kick CS Controlled Release Cyfluthrin Insecticide before diluting in 16 gallons of water. A ratio of 1 or 2 fluid ounces of Cy-Kick CS to a gallon of water yield 0.05% and 0.10% concentrations respectively. Concentrations may be varied depending on applications such as infestation intensity or residue control. Mix and agitate the spray solution to ensure an even mixture before spraying.

Surfaces must be prepared and thoroughly cleaned before commencing the treatment. Before treating, surfaces must be checked for exposed electrical connections and water presence. Cy-Kick CS should not be applied directly onto drifting water, which may contaminate water supplies in inhabited areas.

The product is extremely toxic and must be kept out of reach of children. Remember to wear safety apparel such as masks, gloves, goggles, boots and protective clothing before spraying.

Where to Apply Cy-Kick CS

Indoor Applications

Apply Cy-Kick CS indoors by first adding fluid ounce of Cy-Kick CS to a gallon of water for a 0.05% spray solution or increase Cy-Kick CS to water ratio as recommended. (Please refer to the Spray Dilution Chart)

Prepare and thoroughly clean indoor surfaces before treatment. Spray the diluted solution of Cy-Kick CS to infested areas, cracks, crevices and other areas frequented by pests. Treatments must be done 3 days apart if necessary.

Outdoor Applications

Apply Cy-Kick CS outdoors by first adding fluid ounce of Cy-Kick CS to a gallon of water for a 0.05% spray solution or increase Cy-Kick CS to water ratio as recommended. (Please refer to the Spray Dilution Chart)

Prepare and thoroughly clean outdoor surfaces before treating them. Spray the diluted solution of Cy-Kick CS to infested areas, cracks, crevices and other areas frequented by pests. Treatments must be done 3 days apart if necessary. Treat perimeter soil and building foundations to prevent future infestations.

CyhaloCap CS Product Label

CyhaloCap CS Material Safety Data Sheet (MSDS)

CyhaloCap CS Insecticide - 1 pint

High-performance microencapsulation technology for residual control. CyhaloCap CS (Capsule Suspension) Insecticide provides broad-spectrum, residual control of structural pests for PMPs who prefer lambda-cyhalothrin.

For Use in and Around: Indoor and outdoor

Product Description

CyhaloCap CS is a dilutable spray containing BASF's proprietary SmartCap microencapsulation technology and featuring lambda-cyhalothrin, a proven active ingredient with broad spectrum activity and effective residual control of structural pests.

Cynoff EC Product Label

Cynoff EC Material Safety Data Sheet (MSDS)

CYNOFF EC - 1 Quart

Cynoff EC uses a knock down method which last longer then organophosphates to control pest. Once the pest comes in contact with Cynoff EC, it is killed. Cynoff EC is an odorless insecticide concentrate and leaves no residue. Cynoff EC, along with Cynoff WP and Demon WP, belong in the synthetic pyrethroid family, carrying the same active ingredient as Cyper WP and Demon WP. You only need 1/2 to 1 ounce of Cynoff EC per gallon of water, one quart yielding 32-64 gallons.

Fortified by Cypermethrin, Cynoff EC Insecticide delivers quick and powerful cleanout control of cockroaches and other pests. Upon contact or ingestion, the active ingredient instantly paralyzes and kills insects. Commonly used for residual control or direct kill applications, Cynoff can also be used for barrier treatments with exceptional results.

Why Should You Use CYNOFF EC ?

Cynoff EC provides immediate solutions to several infestations. It is a fast-acting contact insecticide that is odorless and long lasting.

* Outdoor use only.

**Not for Indoor use in California

Directions for CYNOFF EC Use

Cynoff EC is a concentrate that must be diluted in water for spray or brushing applications. Fill sprayer tanks half-full before adding the concentrate. Add the remaining volume of water and agitate the tank to ensure a uniform mixture. Depending on the target pest/s, solutions must have 0.1% to 0.2% active ingredient content. This can be made by mixing 1/2 fl. oz. of Cynoff with 1 gallon of water to produce solutions with 0.1% A.I. concentration. Doubling the amount of the concentrate yields solutions with 0.2% A.I. content.

Apply the product as a coarse, low pressure spray to infested areas and potential insect-harboring sites such as basements, attics, behind and under appliances, storage areas, cabinets, shelves, baseboards, under sinks and along plumbing. Pay particular attention to cracks, crevices and voids.

Using hand or power sprayers, apply the product by brush or residual spray to building surfaces, porches, window screens, patios, lawns and other grass areas to control outdoor insects.

For barrier treatments, create a band measuring 6 to 10 feet around structures to protect them from infestations. Apply the product as a coarse spray, at the rate of 1 gallon per 400 square feet. Also treat building foundations and other potential entry points to a height of 3 to 5 feet.

To control cluster flies, mix 1 fluid ounce of Cynoff to 10 fluid ounces of mineral oil. Apply to 1,000 square feet of wall area using fogging equipment.

Where to Apply CYNOFF EC

Cynoff EC is for residual pest control in and on buildings and structures including: industrial buildings, houses, apartment buildings, laboratories, buses, greenhouses, and the nonfood/feed areas of stores, warehouses, vessels, railcars, trucks, trailers, aircraft (Do not use in aircraft cabins), schools, nursing homes, hospitals, restaurants, hotels, and food manufacturing, processing, and servicing establishments.

Cynoff WP Product Label

Cynoff WP Material Safety Data Sheet (MSDS)

Cynoff WP - 1 lb.

The power of Cypermethrin is now available in powder form with FMC's Cynoff WP. Excellent for broadcast, perimeter, and crack and crevice treatments, Cynoff delivers superior residual and contact kill to common pests. Cynoff WP has an active ingredient content of 40%, nearly doubling that of Cynoff EC. WP is a cost-effective insecticide that can yield up to 48 gallons of solution at the cost less than its competitors.

Why Should You Use CYNOFF WP?

Cynoff cost less but performs better than other insecticide brands.

Directions for CYNOFF WP Use

Cynoff WP must be diluted in water for spray or brushing applications. The product comes with a plastic scoop with 0.33 oz. capacity. Use a full scoop of Cynoff WP per gallon of water to yield a solution having 0.1% of the active ingredient. Doubling the amount of the concentrate yields solutions with 0.2% active ingredient content. Depending on the target pest/s, solutions must have 0.1% to 0.2% active ingredient content.

Apply the product as a coarse, low pressure spray to infested areas and potential insect-harboring sites such as basements, attics, behind and under appliances, storage areas, cabinets, shelves, baseboards, under sinks and along plumbing. Pay particular attention to cracks, crevices and voids.

Using hand or power sprayers, apply the product by brush or residual spray to building surfaces, porches, window screens, patios, lawns and other grass areas to control outdoor insects.

For barrier treatments, create a band measuring 6 to 10 feet around structures to protect them from infestations. Apply the product as a coarse spray, at the rate of 1 gallon per 400 square feet. Also treat building foundations and other potential entry points to a height of 3 to 5 feet.

Where to Apply CYNOFF WP

Cynoff WP is for residual pest control in and on buildings and structures including: industrial buildings, houses, apartment buildings, laboratories, buses, greenhouses, and the nonfood/feed areas of stores, warehouses, vessels, railcars, trucks, trailers, aircraft (Do not use in aircraft cabins), schools, nursing homes, hospitals, restaurants, hotels, and food manufacturing, processing, and servicing establishments.

Delta Dust Product Labe

Delta Dust Material Safety Data Sheet (MSDS)

How to Apply Dust Insecticide

Delta Dust - 1 lb.

Bayer's Delta Dust is a waterproof insecticide in powder form. Unlike other dusts and residuals, Delta Dust stays dry and active even when applied in areas with high humidity and moisture. Pests prefer damp places such as under sinks and along plumbing and Delta Dust is the perfect control product to use. Fast acting and long lasting, this contact insecticide kills pests upon contact remains active for up to 8 months! Low active ingredient concentration makes the product safe for use even in food handling areas.

Please read the product label for application instructions and the recommended application rates. Pestmall offers Centrobulb Dusters and Bellow Dusters needed to apply Delta Dust Insecticides.

Why Should You Use Delta Dust?

Unlike other dust insecticides, Delta Dust stays dry and effective and remains so for eight long months.

Directions for Delta Dust Use

Delta Dust should be applied uniformly over treatment areas using proper application equipment such as hand dusters, power dusters or paint brushes. Pay special attention to cracks and crevices, voids, under appliances, ducts, plumbing, attics, crawlspaces, baseboards and other sites frequented by pests.

Control listed pests by treating infested areas with Delta Dust at the rate of 2 to 3 grams per 1,000 square feet. Repeat treatments if necessary.

FOR CONTROL OF ANTS, BLACK CARPET BEETLES, BOXELDER BUGS, CENTIPEDES, COCKROACHES, CRICKETS, FLEAS, FIREBRATS, GROUND BEETLES, MILLIPEDES, SCORPIONS, SPIDERS SOWBUGS,SILVERFISH AND WEBBING CLOTHES MOTHS: Thoroughly apply the product to areas where these pests are known to frequent, breed, hide and congregate. Apply the product over ant trails and entry points such as windows and doors. Treat pet sleeping quarters, moist areas under sinks, under and behind refrigerators, inside cabinets and other known infestation sites of the above listed pests.

TERMITES, CARPENTER ANTS AND CARPENTER BEES: Apply the product through cracks and voids on wooden components damaged by wood-boring insects. Treat surfaces vulnerable to infestations such as foundations and walls. Holes may be drilled through damaged components in order to treat inaccessible tunnels and galleries inside. Use this product as a supplement to other treatments.

WASPS AND BEES: Wear protective clothing to avoid stings. It is recommended to treat nests late in the day where wasps/bees are generally less active. Uniformly apply Delta Dust over wasp/bee nests, entrances and their immediate surroundings. Drilling may be necessary to apply the product inside nests.

BEDBUGS: Delta Dust can be used together with other insecticides to treat bed bug infestations. Apply dust to folds and tufts of mattresses, headboards, footboards, springs, bed frames, cracks and spaces between components, furniture, upholsteries and other infested areas. Let the product settle for 4 to 6 hours and thoroughly vacuum treated areas afterwards.

STORED PRODUCT PESTS SUCH AS CADELLES, CHEESE MITES, CIGARETTE BEETLES, CONFUSED FLOUR BEETLES, DARK MEAL WORMS, DRUGSTORE BEETLES, GRAIN MITES, GRANARY WEEVILS, LESSER GRAIN BORERS, MERCHANT GRAIN BEETLES, RED FLOUR BEETLES, RICE WEEVILS, RUSTY GRAIN BEETLES, SAWTOOTHED GRAIN BEETLES, SPIDER BEETLES, TOBACCO MOTHS AND YELLOWMEAL MOTHS: Thoroughly clean storage areas from dirt, debris, dust and dispose of contaminated/infested products. Apply dust to floors, walls and surfaces in storage and handling areas. Treat cracks and crevices, shelves and other sites that may provide harborage to insects.

Where to Apply Delta Dust

Aircrafts, Animal Quarters/Kennels, Apartments, Buses, Food/Feed Manufacturing, Processing and Service Establishments, Greenhouses, Grocery Stores and Supermarkets, Hospitals, Hotels, Motels, Houses, Industrial Buildings and Installations, Laboratories, Mausoleums, Mobile Homes and Recreational Vehicles, Nursing Homes/Day Care Centers, Rail Cars, Restaurants, Schools, Sewers, Stores and Institutions, Telecommunication Conduits, Theaters, Trucks and Trailers, Utility Vaults and Conduits, Vessels, Warehouses and Zoos.

Deltagard G Product Label

Deltagard G Material Safety Data Sheet (MSDS)

DeltaGard G Granule - 20 lbs.

DeltaGard G Insecticide Granule is specially formulated for outdoor use to control common lawn pests. Broad spectrum, easy to apply and outright effective, DeltaGard delivers complete control over outdoor infestations. Highly soluble granules dissolve easily in water and seep through the soil, eliminating burrowing pests.

Why Should You Use DeltaGard G Granule ?

DeltaGard is a broad label insecticide that targets over 40 lawn pests and is totally safe for use in perimeter soil and turf areas.

Directions for DeltaGard G Granule Use

Apply the product evenly to treatment areas using granular spreaders or similar equipment. Apply at the rate of 2 to 3 pounds per 1, 000 square feet. For control subsurface pests, use the higher application rate. Irrigate treated areas immediately after treatments to dissolve the granules and improve efficacy.

For perimeter treatments, treat a band of soil measuring 5 to 10 feet in width around and adjacent to structures. Treat at a rate of 1 to 1 1/2 pounds every 500 square feet.

Treat ant, digger wasp and imported fire ant nests/mounds with 1 to 2 teaspoons of granules in and around each mound. Irrigate the mound/nest and its immediate surroundings to dissolve the granules.

Where to Apply DeltaGard G Granule

DeltaGard is for outdoor use only to treat infestations in laws, landscapes, turfgrass and around perimeters of residential, commercial and recreational areas.

Demand CS Product Label

Demand CS Material Safety Data Sheet (MSDS)

Demand CS Brochure

Demand CS - 8 oz

Demand CS is a highly active insecticide featuring Syngenta's iCAP microencapsulation technology. By encapsulating Lambda-Cyhalothrin, Demand CS produces residuals that are waterproof, photo-stable, and long lasting. Controlled release of the active ingredient greatly increases residual life at the same time reduce the residue's odors and stains. Versatile and economical, Demand mixes well with other registered pesticides and can be diluted and applied in very low concentrations.

Why Should You Use DEMAND CS ?

Demand CS uses microencapsulation techniques to extend the life end efficiency of residuals.

Directions for DEMAND CS Use

Use Demand CS for surface, crack and crevice or spot treatments. The product comes as a concentrate that must be diluted with water and applied using application equipment such as hand/power sprayers.

Shake well before using. Mix Demand CS with water to produce solutions. Finished solutions can be converted to foam using foaming agents to treat structural voids and nests. Solutions may have 0.015% to 0.06% active ingredient content, depending on the target pest/s and the severity of their infestations. Other registered insecticides may be added to yield solutions with multiple capabilities. Please read the product label for dilution tables and application rates.

Apply as a coarse, low pressure spray to indoor or outdoor sites and surfaces. Spray to areas where insects are seen congregating, hiding, breeding and other potential harborage areas. Pay special attention to cracks, crevices and voids in structures. Treat these areas with liquid or foam using appropriate equipment and methods.

Demand CS can also be used to create perimeter barriers, treat infestations in ornamental plants and turf and for subsurface treatments to control mole crickets and ants. Refer to the product label for specific instructions on how to control target pests.

Where to Apply DEMAND CS

Demand CS is for use in, on and around residential, commercial, institutional, public, agricultural and industrial buildings/structures.

Demand G Product Label

Demand G Material Safety Data Sheet (MSDS)

Demand G Granules - 25 lbs.

With an innovative formulation process, the granular perimeter treatment of Demand G with Active Release technology provides powerful and efficient protection against nearly 30 species of pests. Demand G is exclusively engineered with an enhanced solvent for the optimal release of its active ingredient, lambda-cyhalothrin, from the granule. Demand G is specially formulated of optimal release of insecticide and ideal for applications in damp and windy conditions. Demand G is labeled for lawn, landscape and perimeter use. Demand G is also superior in efficiency and provides more treatments per package than traditional granules. Demand G is approved for residential, commercial, and institutional applications.

Useful Tips You May Need to Know

We recommend applying Demand G Granules with handle spreader for easier and more effective application.

Advantages of Demand G Granules

Specially formulated of optimal release of insecticide

Ideal for applications in damp and windy conditions

Labeled for lawn, landscape and perimeter use

Superior efficiency provides more treatments per package than traditional granules

Approved for residential, commercial and institutional applications

For control of ants, beetles, crickets, earwigs, firebrats, millipedes, mites, silverfish and sowbugs as commonly found around or near foundation of structures as well as in yards with Demand G:

Some of these pests may enter houses. Applying a continual band of insecticide around a building foundation can greatly reduce the potential for entry by crawling pests. For optimal control, remove debris and leaf litter from next to the foundation, cut back vegetation and branches that touch the foundation, and move or rake back rocks, deep mulch, or other potential pest harborage next to the foundation prior to application. Apply a 3 to 5 foot band of granules next to the structure foundation. Apply at the rate of 2 to 3 lbs. per 1000 square feet. Distribute granules uniformly. For optimal control, water lightly to dissolve granules.

For control of ants, armyworms, centipedes, crickets, cutworms, earwigs, grasshoppers, green June beetles, Japanese beetles (adult), leafhoppers, millipedes, mites, pillbugs, sod webworms, spider mites, spittlebugs and springtails with Demand G:

Apply at the rate of 2 to 3 lbs. per 1000 square feet with a fertilizer spreader when grass is dry. For best results, water lawn lightly to dissolve granules.

For control or suppression of billbugs, chinch bugs, dung beetles, green June beetle grubs, Hyperodes weevils, Japanese beetle grubs and mole crickets, immediately water grass thoroughly after application with Demand G:

For billbug control, apply when activity is first observed or when chewed or brown grass indicates damage from these insects. For grub suppression, except dung beetle, treat any time between late July and early October. For dung beetle grub suppression, apply in spring or early summer when damage is first noticed. For best results, water grass thoroughly with 1/4 to 1/2 inch of water as soon as possible following application. Treat again in late summer or early fall if a second generation occurs. For chinch bugs, use higher rates during summer when both nymphs and adults may be present. For mole crickets, make applications for adults during early spring when grass areas may be subject to continuous invasion. For best results, apply as late in the day as possible and water in with up to 0.5 inches of water as soon as possible following treatment. When the soil is not moist, irrigation before application will bring mole crickets closer to the surface to enhance contact with the granule. Applications at the time of peak egg hatch will increase control of early nymphal stages that are more susceptible to insecticides. As nymphs mature, higher rates may be necessary.

Spot Treatment for Ants with Demand G:

For general ant control, apply 11/2 teaspoons over and around each ant hill. Lightly water to dissolve granules. Apply water gently to avoid disturbing ants, first breaking any necessary soil crust to ensure water penetrates the nest. Use of high pressure watering equipment may disturb the ants and cause migration-reducing product effectiveness. NOTE: For best results, apply in cool weather, 60 to 80 F, in early morning, or late evening hours. Treat near mounds as they appear. Difficult or extensive ant infestations will benefit from a combination of broadcast treatments and spot applications. If soil is not moist, irrigate before application to bring ants closer to the surface to enhance control with Demand G Insecticide granules. Do not apply this product to edible growing crops or stored raw agricultural commodities used for food or feed. Do not allow applications to contact water inhabited by fish, such as in ornamental fish ponds that are located around structures being treated. Do not apply this product by aerial application. Use of this pesticide adjacent to water may affect aquatic organisms. To protect these organisms, do not apply this pesticide within 25 ft. of lakes, reservoirs, rivers, permanent streams, marshes or natural ponds, estuaries, and commercial fish farm ponds. In the state of New York, do not apply within 100 ft. of coastal marshes or streams that drain into coastal marshes. Observe all restrictions and precautions which appear on the labels of these products. Do not apply more than 0.36 lbs. of the a.i. (800 pounds of Demand G Insecticide) per year. Good coverage is necessary to provide the most effective level of control. Consult your state university or local Cooperative Extension Service office for specific pest control application timing in your area. Application to turf should be started prior to the establishment of high insect pest populations and significant turf damage. Make reapplications as necessary to keep pest populations under control, using higher rates as pest pressure increases.

CB D-Force HPX Product Label

CB D-Force HPX Material Safety Data Sheet (MSDS)

CB D-Force HPX - 14 oz.

The CB D-Force HPX is one of the best-selling aerosol insecticides in the market. D-Force HPX provides fast killing action and residual control over 50 species of pest insects. Properly applied, the product residues remain potent for up to 8 weeks, making the product an ideal supplement to several types of bait. Both the D-Force HPX and D-Foam contain low concentrations of the synthetic insecticide Deltamethrin. Low active ingredient and volatile organic compound (VOC) content makes the product ideal for use in residential and food-handling areas of buildings.

Why Should You Use CB D-Force HPX ?

CB D-Force has a broad spectrum label, long residual half-life and a powerful formula to effectively control invasive pests.

Directions for CB D-Force HPX Use

Shake well before each use. Hold the container upright and hold the can 12 to 15 inches away from treatment areas. Use the supplied actuator for crack and crevice treatments. Direct the nozzle towards the treatment area and apply the product as recommended in the product label.

Spray sufficient amounts of CB D-Force directly over insects or to sites where pests are seen. Pay particular attention to areas harboring insects such cracks and crevices, under appliances, sinks and other potential hiding and breeding spots. For bedbugs, remove beddings and apply the product in tufts, folds and the bed frame. Wash beddings before reusing.

CB D-Foam is suitable for surface applications, crack and crevice applications, spot treatments and wall void applications. To control subterranean termites in above-ground areas of structures, first locate galleries, voids and tunnels in wooden structural components using available location techniques. It is sometimes necessary to drill holes in order to access and inject foam into insect galleries. Apply the product to voids/areas where insects frequent, breed, and hide.

Carefully read the product label for application instructions and precautions.

Where to Apply CB D-Force HPX

CB D-Force is for use in and around: Homes, Apartments, Hospitals, Hotels, Food Handling Establishments, Restaurants, Food Processing Plants, Industrial Buildings, Storage Areas, Warehouses, and Transport Vehicles.

DRAGNET SFR Product Label

DRAGNET SFR Material Safety Data Sheet (MSDS)

Dragnet SFR - 1 Qt

From the makers of CB Residuals and Talstar insecticides comes another revolutionary termiticide with enhanced residual and contact kill capabilities. FMC's Dragnet SFR Termiticide/Insecticide does not break down easily in soil and retains its potency for extended periods of time. Specially formulated for subterranean termites, Dragnet also targets a wide range of indoor and outdoor pest insects. Versatile and very economical, one quart yields 100 gallons of solution that can be used in a variety of applications.

Why Should You Use Dragnet SFR ?

Dragnet SFR is superior in both residual control and contact kills to more than 50 insects in its label.

Directions for Dragnet SFR Use

Dragnet SFR is a concentrate that must be diluted in water to create emulsions. Active ingredient content may vary from 0.5% to 2.0% depending on treatments or target pests. Use this product for pre-construction treatments of structures or to treat existing termite infestations in and around buildings and structures. Knowledge of treatment techniques such as rodding, trenching, sub-slab injections, void injections and crack and crevice treatments is essential in order to have effective control of termites. Use this product for residual pest control in and on buildings and their immediate surroundings. Dragnet SFR may be used in broadcast applications, spot applications, crack and crevice injections or as a paint-on treatment. Consult the product label for more details.

Where to Apply Dragnet SFR

Dragnet SFR is for use in and around residential, commercial, public and industrial buildings. This includes homes, apartments, laboratories, greenhouses, non-food areas of food handling store areas, warehouses, schools, nursing homes, hospitals, transports and food processing, manufacturing and servicing establishments.

Drione dust Product Label

Drione dust Material Safety Data Sheet (MSDS)

How to Applying Dust Insecticide

Drione Dust - 1 lb.

Drione Dust provides contact kill and residual control of target pests in and around homes. A powerful combination of pyrethrins, synergists and desiccants makes Drione an excellent dust. A broad label product, Drion controls dozens of common house pests including pantry pests. When used as directed, residuals may last for 6 months if undisturbed.

Why Should You Use?

Drione contains a combination desiccants and pyrethrins that dehydrates and poisons insects, killing them off in two lethal blows.

Directions for Use

Application of Drione is limited to crack and crevice treatments only. Using hand dusters, powered dusters or similar equipment, apply the product in cracks and crevices, voids, gaps between structural components, spaces under and behind appliances, inside cabinets and closets, under sinks, along plumbing, crawl spaces and other infested areas. Apply at the rate of 2 ounces per 100 square feet in kennels and animal quarters. For severe infestations, apply Drione at the rate of 16 ounces per 1000 square feet of surface area. Please read the product label for directions on how to control specific pests.

Please read the product label for application instructions and the recommended application rates. Pestmall offers Centrobulb Dusters and Bellow Dusters needed to apply Drione Dust Insecticides.

Where to Apply

Drione Dust is labeled for use in and around food and non-food areas of residential, commercial, agricultural and industrial buildings. Permitted areas of use include homes, apartments, hospitals, schools, warehouses, restaurants, office buildings, hotels, trucks, trailers and lawns.

Eco Exempt IC 2 Product Label

Eco Exempt IC 2 Material Safety Data Sheet (MSDS)

Eco exempt IC-2 Insecticde (Essentria IC - 3)

Eco exempt IC-2 Insecticde (Essentria IC - 3) uses a knockdown method to kill pests the minute they come into contact with it. EcoExempt IC is an all-natural substance made from oils such as rosemary, wintergreen, and eugenol. Unlike chemical pesticides, EcoExempt IC-2 leaves behind a botanical scent. EcoExempt IC- 2 works great for corners, cracks, and crevices.

Inside: Apartment buildings, bakeries, beverage plants, bottling facilities, breweries, cafeterias, candy plants, canneries, cereal processing and manufacturing plants, dairy barns, poultry facilities, flour mills, food processing plants, frozen food plants, homes, hospitals, hotels, houses, industrial buildings, kennels, kitchens, laboratories, manufacturing facilities, mausoleums, meat processing and packaging plants, meat and vegetable canneries, motels, nursing homes, office buildings, restaurants, schools, stores, supermarkets, warehouses, and similar structures.

Outside:Building foundations, dairy facilities, drive-in restaurants, drive-in theaters, golf courses, parks, playgrounds, poultry houses, recreational areas, schools, urban areas, lawns, landscape areas, trees, turf, and zoos.

For sensitive indoor/outdoor surfaces such as vinyl, plastic, fabric, wood floors, etc. test a small non-visible area first before spraying. This includes vinyl siding, outdoor furniture, storm doors and windows, etc. It is possible that EcoEXEMPT IC2 may mar some sensitive surfaces. If spray gets on any sensitive surface that is listed, simply rinse with water and wipe off with clean cloth. EcoEXEMPT IC2 may be diluted with water or oil and applied with conventional application equipment including, but not limited to, compressed air sprayers and power sprayers. When diluting with water, prepare only the amount needed for immediate use and maintain agitation during use. Do Not Store Spray Solution Overnight. For oil dilutions that are applied in food handling establishments, a deodorized petroleum oil which conforms to CFR 21 (especially section 172.884) is required (such as Exxon Isopar M, Ashland Low Odor Base Solvent, or the equivalents). Tank mix applications must be made in accordance with the more restrictive of label limitations and precautions. No label dosages may be exceeded. This product cannot be tank mixed with any product with label prohibitions against such mixing.

Advantages of EcoEXEMPT IC-2

Quick knockdown/kill
Residual protection
Flexible label
Indoor/outdoor use
Broad spectrum
Non-staining
Highly versatile
Low aquatic toxicity
For conventional, misting and fogging equipment
Great for mosquito control programs
New softer botanical scent
May be used for on-animal applications

Do not apply directly to house plants. Cover/avoid any pools or aquaria prior to spraying.

GENERAL PEST CONTROL with Eco EXEMPT IC - 2:

To control accessible, exposed stages of crawling insects including, but not limited to, Ants, Cockroaches, Cadelles, Cigarette Beetles, Dark Mealworms, Dried Fruit Beetles, Drugstore Beetles, Confused Floor Beetles, Grain Mites, Fowl mites, Mites, Red Flour Beetles, Rice Weevils, Saw-toothed Grain Beetles, Spiders, Spider Beetles, Termites, Yellow Mealworms in sites that include, but are not limited to, apartments, homes, restaurants, food processing plants, industrial installations and warehouses, dilute at the rate of up to .5 to 6 fluid ounces of EcoEXEMPT IC2 per gallon of water (use lower rate for maintenance service and higher rates for active infestations). Thoroughly spray non-visible areas where these insects are usually found with special attention to cracks and crevices, niches, dark corners, drains and other harborage sites. To prevent potential discoloring, do not spray on visible areas (i.e. baseboards, door frames, walls, etc.) and wipe away excess. Food processing operations may continue when EcoEXEMPT IC2 is applied as a surface, spot or crack and crevice treatment in accordance with the directions and precautions given above.

FOGGING with Eco EXEMPT IC - 2:

To control crawling and flying insects (Flies, Moths, Fruit Flies, etc) in sites that include, but are not limited to, food processing plants, (INCLUDING USDA INSPECTED FACILITIES), industrial installations, animal quarters (cattle barns, horse barns, poultry barns, swine houses, zoos and warehouses), EcoEXEMPT IC2 may be applied as a space spray through conventional fogging equipment. Cover or remove exposed food and cover food-handling surfaces in edible product areas of food handling establishments. Also cover sensitive surfaces (plastics, etc). Close and shut off air conditioning or ventilating equipment. Mix 4 to10 ounces of EcoEXEMPT IC2 insecticide with sufficient oil to equal 1 gallon of diluted spray. (It is recommended to use lower rates in most food facility applications). Apply at a rate of 1 to 3 fluid ounces per 1000 cubic feet, filling the room with mist (or fog, if thermal equipment is used). Keep area closed for at least 15 minutes. Vacate treated area. Ventilate before reoccupying. Fogging may create slippery conditions on painted floor surfaces. Retreat if reinfestation occurs. The product does contain plant oils that are inherently fragrant. When used in confined spaces, prolonged exposure to the fragrance may be objectionable to some individuals.

Eco PCO WP X Product Label

Eco PCO WP X Material Safety Data Sheet (MSDS)

EcoPCO WP X - 1 lb

EcoSMART's line of safe pesticides for home use is now available in the form wettable powder for residual control in and around residential, commercial and industrial buildings. EcoPCO is a broad label insecticide containing the same natural active ingredients as other EcoSMART products. EcoPCO WP combines three botanical insecticides in one package that is just as efficient as other chemically-based insecticides.

Why Should You Use EcoPCO WP X?

EcoPCO WP∙X provides excellent control over indoor and outdoor pests without the risks associated with chemical-based pesticides.

Directions for EcoPCO WP X Use

EcoPCO WP∙X is a wettable powder that must be diluted in water and applied using hand-operated or power sprayers. Thoroughly clean application equipment before using. Fill applicator tank half full with water. Add the recommended amount of EcoPCO as stated in the product label. Active ingredient concentrations may vary from 0.0125% to 0.05%, depending on the target pest/s and the severity of infestations. Agitate the tank to ensure an even mixture. Tanks should be agitated regularly to maintain satisfactory suspension.

FOR INDOOR APPLICATIONS: Spray pressure should not exceed 50 psi. Apply as a coarse, low-pressure spray to infested sites. Inject cracks, crevices and voids using injectors. Treat interior and exterior surfaces of cabinets, baseboards, sinks, closets, storage areas, appliances, plumbing and other entry/exit sites. Please read the product label for directions on how to conduct treatments for specific pests.

FOR OUTDOOR APPLICATIONS: Using hand or power sprayers, apply as a residual treatment to outdoor surfaces such as screens, window sills, doors, porches, patios, garages and other areas where pests are found. The product can be applied to landscaped areas and ornamental plants or in barrier treatments around and adjacent to buildings. Please refer to the product label for instructions on how to conduct outdoor treatments.

Where to Apply EcoPCO WP X

EcoPCO is for use inside, on, and around residential, commercial, institutional and industrial buildings. Areas of use include apartments, homes, hotels, motels, schools, hospitals, nursing homes, factories, stores, warehouses, restaurants, supermarkets, zoos, food processing and handling establishments and transportation equipment such as aircraft, buses, trailers, trucks, trains, ships and vessels.

Extinguish Plus Product Label

Extinguish Plus Material Safety Data Sheet (MSDS)

Extinguish Plus Fire Ant Bait - 25 lbs.

Outdoor Use 

Individual Mounds: For imported and native fire ants, harvester ants, big-headed ants, and argentine ants, use 2 to 5 level tablespoons and distribute bait uniformly around the mound. Do not disturb the mound. Do not apply more than 2 lb/acre. Do not contaminate kitchen utensils by use or storage.

Broadcast Treatment: For imported and native fire ants and harvester ants, use 1.5 lb/acre or 3 oz/ 5,000 sq ft. Broadcast bait uniformly with ground (graular spreaders) or aerial equipment. For big-headed ants and argentine ants use 1-2 lb/acre or 2-4 oz/5,000 sq ft. Broadcast bait uiformly with ground (granular spreaders) or aerial equipment.

Apply when ants are active and foraging (when soil temperature is greater than 60 F). To determine if ants are foraging (feeding), place a potato chip near the mound and observe if ants begin feeding. Do not apply product if ants do not feed within a few minutes. Repeat observation at a later time to evaluate if ants are feeding. Apply product when feeding occurs on the potato chip. Repeat applications as needed. Do not apply product within 6 hrs of a rain event. Apply product when area is dry from dew or irrigation. Do not irrigate for 24 hrs after applicaton. The bait will become unattractive to ants if it becomes wet. Ants that are actively foraging will begin picking up the bait soon after application.

Refillable Bait Stations: Use Extinguish Plus in refillable bait stations. Place up to 1 oz (2 tablespoons) of Extinguish Plus per refillable bait station. Place stations along the perimeter of a structure or fence line with 1 station every 15 to 30 linear feet. Locate stations near potential pest entry points of a structure or near locations where pests are a problem.

Indoor Use

Using a duster or similar equipment, apply bait ONLY into cracks and crevices or other inaccessible areas such as, but not limited to, structural voids, unfinished attics, or crawl spaces. Apply 0.25 - 0.5 oz (2 teaspoons) per 100 sq ft only if the space is secured or otherwise inaccessible to children or pets.

Extinguish Professional Product Label

Extinguish Professional Material Safety Data Sheet

Extinguish Professional Fire Ant Bait Supplemental Label

Extinguish Professional Fire Ant Bait - 2.5 lbs.

Extinguish Professional Fire Ant Bait combines (S)-Methoprene, an Insect Growth Regulator (IGR), with attractive bait that foraging fire ant workers take back to the queen. (S)-Methoprene adversely affects the queen's ability to reproduce, so when existing workers die (normally within a three-week period), no new workers are created to replace them. The result? Starvation and elimination of the entire colony.

For Use in and around: Residential Turf and Landscapes, Parks, Zoos, Golf Courses, Roadsides, Airports, Cemeteries, School Grounds, Sports Fields, Sod Farms, Forestry Sites, Perimeter of Buildings, Homes, , heds, Electrical and Phone Boxes, Pump Houses, Commercial Nurseries, including Field-Grown and Container, Stock, Crop areas *Additional sites can be found on the ExtinguishPro. Product Label.

Useful Tips You May Need to Know

ELIMINATES FIRE ANT COLONIES
STOPS THE DEVELOPMENT OF NEW MOUNDS
NO WITHDRAWAL PERIOD OR GRAZING RESTRICTIONS ON TREATED AREAS
CAN BE USED AROUND FLOWERS, SHRUBS, AND TREES
WITH PRECOR INSECT GROWTH REGULATOR (IGR)

Description

EXTINGUISH  PROFESSIONAL FIRE ANT BAIT (EXTINGUISH) contains an insect growth regulator (IGR) with specific activity to fire ants. The IGR is contained in an attractive bait that foraging fire ant workers take back to the mound to feed to the queen. IGR's are different from conventional products which provide a direct kill to fire ants. IGR's work by affecting queen reproduction. The effects of the treatment may not be immediately evident. IGR's are slower in activity than conventional products. Though slower in action, control is complete without the concern of rebounding or movement of the colony to another location. Reduction in colony size can be seen beginning at 3 weeks with colony Extinguish Professtional Fire Ant Bait will eliminate the pests within 8 to 10 weeks. When existing workers die, replacement workers are not produced, resulting in starvation and elimination of the queen and colony.

Methods of Application

General application during heat of the day or when rain is expected within 6 hours of application will reduce the effectiveness of this product. Moisture reduces the attractiveness of the bait in wet areas. In areas of heavy infestation, repeat applications may be necessary 10 to 12 weeks following the initial application.

1. Individual Mound Treatments - Treat all visible mounds with 3 to 5 tablespoons of EXTINGUISH per mound. To treat the mounds, sprinkle the adjacent areas of the mound, applying evenly in a manner to encompass the mound to a perimeter of 4 feet. Do not disturb the mound during application. Worker ants will locate the bait quickly and begin taking it back to the mound.

2. Broadcast Applications - Apply EXTINGUISH to areas at the rate of 1 to 1.5 pounds of product per acre (3.5 tablespoons/1000 ft2) using suitable application equipment. Backpack, hand, or motorized mechanical equipment may be used. No withdrawal or grazing restrictions are necessary on treated areas.

EXTINGUISH may be used as a preventative application to reduce the buildup of fire ants into unwanted areas. Two to three broadcast applications per year are recommended to prevent the encroachment and subsequent development of new mounds into an area. Repeat applications may be made as often as fire ants are observed.

3. Hopper Blend - Blend EXTINGUISH with other fire ant bait products such as ProBait   Amdro Pro, or other bait products labeled for fire ant control. When blending products, the more restrictive label will apply. Use a 50/50 mix to blend EXTINGUISH and other bait. For broadcast applications, mix the required amount of bait so that the application is made using 0.75 lbs. EXTINGUISH and 0.75 lbs. of other bait for a total of 1.5 lbs. of total bait per acre. For mound treatments, blend a 50/50 mix of EXTINGUISH and other bait and apply at the rate of 3-5 tablespoons per mound.

4. Refillable Bait Stations - EXTINGUISH may be used in refillable bait stations. Place up to 1 oz of EXTINGUISH per refillable bait station. Locate stations along the perimeter of a structure or fence line with 1 station every 15-30 linear feet. Locate stations near potential ant entry points of a structure or near locations where ants are a problem. Examples include: weep holes, foundation vents, stairs, decks, patios, picnic areas, utility areas, and other areas frequented by ants. Inspect stations frequently and replenish bait if soiled or wet. Affix a sticker to bait station indicating the contents.

INDOOR USE

Use EXTINGUISH indoors in homes, residences (apartments, nursing homes), commercial buildings and warehouses, and any other structures where ants may enter. Also for use in non-food/feed areas of institutions, restaurants, commercial food processing areas, including poultry and livestock operations. Apply bait as a crack, crevice, and void treatment or to areas that are inaccessible such as attics, crawlspaces, and wall voids. Apply 0.25 ~ 0.50 oz per crack, crevice, or void. For use in attics or crawlspaces, use 0.25 oz per 100 square feet in those areas that are inaccessible to children or pets.

Fire Ant Killer Product Label

Fire Ant Killer Material Safety Data Sheet (MSDS)

Fire Ant Killer - Acephate 75 SP

Surrender Fire Ant Killer contains 75% Acephate and is used for controling fire ants.  One can of Surrender Fire Ant Killer can treat up to 108 fire ant mounds.

For Use in and around:

Outdoor use

Imported Fire Ants (including Ants and Harvester Ants)Mound Treatment in Non-Crop Areas:
Evenly distribute 1 to 2 teaspoons over the mound. For best results, apply the material in the early morning or late afternoon when the ants are most active.

Imported Fire Ants and Harveter Ants Mound Treatment in Turfgrass (residential, recreational and commercial) Areas:
Evenly distribute 1 to 2 teaspoons over the mound.

Ant Cafe Gourmet Ant Bait Gel Product Label

Ant Cafe Gourmet Ant Bait Gel Material Safety Data Sheet (MSDS)

Ant Cafe Gourmet Ant Bait Gel - 1.5 oz.

Ant Cafe Gourmet Ant Bait Gel is an odorless substance that does not leave stains or a mess, even in high temperatures. Ant Cafe Gourmet Ant Bait Gel uses a special insect attractant that will attract ants as well as other insects, such as protein feeding insects, sweet feeding ants, and even roaches. Ant Cafe Ant Bait Gel eliminates more than it repels. The secondary kill system will kill the ant that is exposed to the gel and any others that come in contact with it as well, killing the whole colony in the long run. It is important that you do not kill the ones you see so that they can expose the poison to the entire colony in order to eliminate it. You can make your home ant-free!

Useful Tips You Should Know:

1. Before applying Gourmet Ant Bait Gel thoroughly clean and remove the area of food sources especially all the crumbs.
2. Get rid of all types of odors in your hands that might repel the ant away.
3. Inspect every few days to see if replacement is necessary, and to add more in high traffic areas.
4. Do not use or mix any other chemicals with Gourment Ant Bait Gel.

Gourmet Ant Bait Gel has 6% Disodium Octaborate Tetrahydrate (DOT) as the active ingredient. DOT is less of a repellent then other Boron based toxicants and is more effective at eliminating both the workers and queens in active ant colonies than many other products. Recent studies show that foraging ants take only 1/4 as much food in gel form as compared to liquid form. Therefore, the dose of DOT delivered to the colony is about the same as in a 1-2% liquid bait. Gel baits tend to dry out quickly unless placed in an Ant Cafe, so small placements should not be relied upon for control.

Advantages of Ant Cafe Gourmet Ant Bait Gel:

1. Ant Cafe Gourmet Ant Bait Gel stays where it is placed.
2. Ant Cafe Gourmet Ant Bait Gel is attractive to both Sweet and Protein feeding ants.
3. Will not become runny, even if exposed to 150 degrees F for several hours.
4.Ant Cafe Gourmet Ant Bait Gel is used indoors in cracks and crevices to quickly eliminate foragers.
5. Many small placements can be made quickly, so that the best place for larger placements can be determined.
6. Ant Cafe Gourmet Ant Bait Gel is very economical to use.

Gourmet Ant Bait Gel may be used in Ant Cafe or other similar bait stations.

To use Ant Cafe bait station; open the lid, add Gourmet Ant Bait Gel until station is at least half full, close lid, and place according to directions for use.

For use in and around:

homes, apartments, condominiums, schools, hospitals, restaurants, grocery stores, non-food areas of food processing plants, boats cruise ships, institutional and commercial buildings, nursing homes, hotels and warehouses.

Indoor:

Use Gourmet Ant Bait Gel for the control of ants or German Cockroaches, Make long thin lines in areas where ants are a problem. Use 1-3 lines for each placement. Place baits where ants are trailing or have been seen. Place bait under food cabinets, sinks, stoves, refrigerators, food storage areas, attics, garages, basements, storage areas, closets, etc.

Outdoor:

Place on exterior window-sills and in doorways to help prevent entry of ants.

Do not use sprays, foggers, or any strong chemicals or cleaners near the bait containers or placements. This may contaminate the bait and cause the insects to cease feeding.

Gourmet Liquid Ant Bait Label

Gourmet Liquid Ant Bait Material Safety Data Sheet (MSDS)

Gourmet Liquid Ant Bait - 32 oz.

Gourmet Liquid Ant Bait is the first liquid ant bait to use Disodium Octaborate Tetrahydrate (DOT) as the Active Ingredient and to be labeled for dilution with any food grade liquids. DOT is a Boron salt which is toxicologically similar to Boric Acid and Borax, but has several unique characteristics that affect how it can be formulated. Gourmet Liquid Ant Bait is effective in treating very large ant infestations and does not have many of the problems associated with broadcast pesticide applications, such as ground water contamination or killing of non-target target insects that can be beneficial to controlling pests. Gourmet Liquid Ant Bait is the only bait being used commercially to treat ants that affect agricultural production and it is the only liquid ant bait certified for use in Organic Agriculture. Gourmet Liquid Ant Bait contains a special blend of ingredients that are scientifically formulated to mimic the "honeydew" produced by aphids; this "honeydew" serves as the main food source for many of the most aggressive ant species such as Argentine Ants, Odorous House Ants, Carpenter Ants, White-Footed Ants, and Crazy Ants. Our formulation attracts all of these ants and many others. Roaches are also highly attracted to it.

For Use in and around: Indoors and outdoors near: homes, apartments, condominiums, schools, hospitals, restaurants, grocery stores, food processing plants, boats, cruise ships, institutional and commercial buildings, nursing homes, hotels and warehouses.

Advantages of Gourmet Liquid Ant Bait

1. Gourmet Liquid Ant Bait is specifically labeled to allow use in or out of bait stations.
2. Gourmet Liquid Ant Bait is the only bait we know of that is specially formulated to allow dilution. This can cut the effective cost of the bait by up to 50%.
3. Gourmet Liquid Ant Bait is accepted by a wider variety of ants because of the Uni-Tract ant attractant.
4. In most countries, Gourmet Liquid Ant Bait is labeled for both Ant and Roach control.

Bifen Granule Product Label /

Bifen Granule Material Safety Data Sheet (MSDS)

Bifen L/P Granules - 25 Lbs.

Bifen Granular features a long lasting residue that protects lawns and perimeters from insect infestations. The granular insecticide acts by impairing the nervous systems of insects for effective control. Bifen L/P is for use to control ants, worms, weevils, crickets, leafhoppers, millipedes, centipedes, ticks, pillbugs, flies and other pest insects.

Bifen L/P helps keep your lawns and perimeters free from outdoor pests such as ants, centipedes, crickets, flies, millipedes, weevils and other invasive insects. Each bag of Bifen L/P contains 0.20% Bifenthrin, a powerful pyrethoid insecticide that is highly effective against common lawn pests. In addition, the product leaves a long-lasting residue that lasts for months.

*Depending on availability, you will get either Bifen Granules or Wisdon Granules. Both products are EXACTLY THE SAME.

Why Should You Use Bifen Granulars ?

Bifen L/P is one of the longest-lasting residual insecticides in the market due to its low solubility in water. A single application of Bifen granules to treatment area leaves residues that last for up to 8 months!

Target Pest(s):

Armyworms, Cutworms, Sod Webworms, Annual Bluegrass Weevils, Billbugs, Black Turfgrass Ataenius, Leafhoppers, Mealybugs, Ants, Centipedes, Chinch Bugs, Fleas , Imported Fire Ants, Millipedes, Mole Crickets, Ticks, Pillbugs, Sowbugs, European Crane Flies.

Directions for Bifen Granulars

For broadcast treatments, application equipment such as dusters should be used to ensure uniform applications of Bifen L/P to treatment areas. Apply Bifen L/P following the application rates found in the product label. Apply the product as directed in the product label. Most applications require treated areas to be watered to release (activate) the active ingredient from the granules. For broadcast applications in residential areas, do not apply more than 0.2 lbs of the product per acre of treatment area. Application rates may be increased to not more than 0.4 lbs of Bifen L/P's active ingredient per acre for non-residential areas. For fire ant mound treatments, apply 1/2 cup of Bifen Granulars directly over mounds and induce 1 to 2 gallons of water to the mound.

here to Apply Bifen Granulars

Use Bifen L/P to control pests in lawns, landscaped areas and perimeters around residential, commercial, industrial buildings, parks, athletic fields and recreational areas. The product should be used to treat golf courses, nurseries, greenhouses and sod farms.

Note: electrical transformers appear to the more attractive to ants during the cooler months. For best results treat in the Fall or early Spring.

Ever Green Dust Product Label

Ever Green Dust Material Safety Data Sheet (MSDS)

PyGanic Dust (EverGreen Pyrethrum Dust) - 10 oz.

One of the most trusted insecticide dusts, PyGanic delivers fast control over 230 pests. Each bottle of PyGanic contains pure, unsynergized Pyrethrum derived from chrysanthemum flowers. With its natural active ingredient and non-toxic formulation, PyGanic is safe to use in food/feed handling areas, livestock animals and ornamental plants.

Why Should You Use?

EverGreen Pyrethrum Dust can be used to control different kinds of infestations.

Directions for Use

Please read the product label for application instructions and the recommended application rates. Pestmall offers Centrobulb Dusters and Bellow Dusters needed to apply PyGanic Dust (EverGreen Pyrethrum Dust) Insecticides.

TREATMENT OF STORED PRODUCT PESTS IN NON-FOOD/FEED AREAS: Before treatments, clean infested areas and remove infested materials, dirt and other debris. Apply at the rate of 16 to 24 ounces per 1,000 square feet of area. Thoroughly treat surfaces, floors, shelves, drawers, cabinets, cartons, containers in storage areas. Apply one ounce per 50 square feet into cracks and crevices, voids and other hard to reach areas.

INDOOR TREATMENT OF CRAWLING INSECTS: Apply EverGreen Dust at the rate of 1.5 oz. per 50 sq. ft. into cracks, crevices and voids where insects live and breed. Apply uniformly to areas under and behind sinks, refrigerators, stoves and washing machines, around garbage cans, cabinets, shelves, baseboards, door frames, drains, pipes and other sites where insects are seen. Treat crawlspaces and attics at the rate of 16 to 20 ounces per 1,000 square feet.

TREATMENT OF FLEAS, TICKS AND MITES: Remove pets from treatment areas. Thoroughly treat pet beddings, resting areas, sleeping quarters, kennels, carpets, rugs, furniture and other infected areas and their surroundings. Do not treat pets with this product.

TREATING BED BUGS: Take bed apart and apply EverGreen to bed frame, headboards and footboards at the rate of 2 oz. per 50 sq. ft. of surface area. Dust mattresses, cushions and furniture especially on folds, tufts and seams. Pay special attention to cracks and crevices between components, in walls, electrical boxes, appliances, picture frames, jambs, window sills, shelves, cabinets, curtains, blinds and their mounts.

PERIMETER TREATMENTS: Apply to a band of soil measuring 6 to 10 feet wide around and adjacent to structures and around foundations. Apply at the rate of 16 - 24 oz. per 1,000 sq. ft. Treat exterior surfaces to a height of 2 to 3 feet.

CONTROLLING LAWN, LANDSCAPE AND ORNAMENTAL PESTS: Apply EverGreen Dust at the rate of 8 to 24 ounces per 1,000 square feet. Apply uniformly to lawn surface and to areas under shrubs and trees. Wait for the dust to settle before irrigating treated surfaces.

TREATMENT IN LIVESTOCK PREMISES AND DOMESTIC ANIMALS: Cover Apply to indoor and outdoor animal areas at the rate of 16 to 24 oz. per 1,000 square feet. Treat cracks and crevices, structural joints, floors, trusses, rafters, ceilings, gates and other areas harboring pests. Conduct perimeter treatments as stated above. Apply 1 to 2 ounces of dust per animal using appropriate application equipment. Apply to head, neck, shoulders, back and legs. Do not treat more than once every 10 days.

Where to Apply

PyGanic is labeled for use in and around food/feed or non-food/feed areas of agricultural, residential, commercial, food/feed handling and processing plants, industrial and institutional buildings.

I Maxx Pro 2F Product Label

I Maxx Pro 2F Material Safety Data Sheet (MSDS)

I Maxx Pro 2F Insecticide / Termiticide

I Maxx Pro 2F is the exact same product as Premise 2 and contains the same amount of active ingredient: Imidacloprid 21.4%. This powerful non-repellent termiticide concentrate creates an effective long-term barrier against termites around residential and commercial structures. Each bottles yields 50 - 100 gallons of insecticide for pest or termite control. While I Maxx Pro 2F is often used against termites, it is also labeled for carpenter ants and other wood-destroying insects.

InTice Thiquid Ant Bait Product Label

InTice Thiquid Ant Bait Material Safety Data Sheet (MSDS)

InTice Thiquid Ant Bait - 4 oz.

InTice Thiquid Ant Bait is a highly effective syrup bait that is attracts a wide range of ants. The syrup form and premium food ingredients make the acceptance of InTice Thiquid unmatched. The bait may be placed directly on flat surfaces and is thick enough that it will not run. For slanted or vertical surfaces or any surface where direct contact with the bait is undesirable, a bait station can be used. The BaitPlate station works exceptionally well in these instances. Simply put a small amount of bait from the 4 oz. dropper bottle into the Bait Plate and you will not have to worry about InTice Thiquid running or getting on any delicate surfaces. To make a liquid bait, mix one part InTice Thiquid with one part water for a 2.5% dilution or mix one part InTice Thiquid with four parts water for a 1% dilution. The 1% dilution may also be sprayed directly on the foundation and a non-repellent can be sprayed on top of it for a "double whammy" effect.

Indoor Use

Controlling and Eliminating Ants: First, ants will come in large numbers, but soon disappear. This product is formulated to allow worker ants to consume the product and survive long enough to carry the liquid back to the nest and deliver a dose to the rest of the colony. Monitor the placements and ensure there is always a fresh supply of InTice Thiquid Ant Bait at each placement. Complete control may take up to two weeks.

Using InTice Thiquid Ant Bait: Apply the product to small pieces of cardboard, paper, or foil or in purpose built bait stations and place product in inaccessible areas where ants are seen, such as the edges of sinks, tubs, window sills, under food cabinets, along floors and base boards, and in corners. Use plenty of bait placements; the more bait placements the better. Since invading ants usually have outdoor nesting sites, it often helps to put the product outside, close to where ants are found entering the structure. Ants typically follow defined trails from the nest to food or water. Placing InTice Bait close to these trails will improve control.

Outdoor Use

Environmental Hazards: Do not apply directly to water or to areas where surface water is present or to intertidal areas below the mean high-water mark. Do not contaminate water when disposing of equipment washwaters or rinsate.

Using InTice Thiquid Ant Bait as a Perimeter Ant Defense System: Locate areas around the building where ants are seen trailing. Place the bait stations against the foundation where the trails are found. Spacing the bait stations every 5 to 10 feet will provide the best results. Check the bait stations regularly for activity. Remember ants will feed on InTice Thiquid Ant Bait and carry the bait back to the rest of the colony. Heavy infestations may require several bait placement refills and up to two weeks for control.

Please refer to and follow the instruction on the InTice Thiquid Ant Bait label.

Masterline Bifenthrin 7.9 Product Label

Masterline Bifenthrin 7.9 Material Safety Data Sheet (MSDS)

Masterline Bifenthrin 7.9 Brochure

Masterline Bifenthrin 7.9

Univar's Masterline Bifenthrin Insecticide/Termiticide offers superior control of indoor and outdoor pests such as termites, cockroaches, ants and many more. Its active ingredient, Bifenthrin, is popular for its broad spectrum of control and excellent residual properties. With Masterline's powerful residual formulation, expect effective and lasting control the toughest pest infestations in and around your homes.

Why Should You Use?

Masterline Bifenthrin 7.9 targets several indoor and outdoor pests. This highly versatile product is the solution to all your indoor and outdoor pest problems.

Directions for Use

Masterline Bifenthrin 7.9 is an emulsifiable concentrate intended for water dilutions. Finished solutions can be used for general surface treatments, crack and crevice treatments or spot applications. Finished emulsions may be converted to foam using suitable foaming agents. Insect growth regulators and other pesticides may be tank mixed together with the product unless explicitly prohibited by the product label. Masterline is excellent for use in treating termite infestations. Technicians must be familiar with termite control techniques such as trenching, rodding, sub-slab injection and coarse spray application for effective use of the product. Apply finished emulsions using appropriate equipment such as hand held or powered sprayers, brushes, foam applicators and other similar application equipment. Carefully read the product label for application directions, dilution rates and application rates.

Where to Apply

Masterline controls pests indoors and outdoors on residential, commercial, institutional, public, commercial and industrial buildings. Areas of use also include lawns, ornamental plants, interiorscapes, recreational areas and athletic fields.

Masterline #32/60 B Gun (Maxforce)

Masterline Bait Injector Gun to be used with 30 gram Bait Gel Reservoirs. Masterline Bait Gun lets an easy way to use bait gels letting out just the right amount of gel. This sturdy Masterline bait gun will come in handy for hard to reach areas giving precision and flow.

Mavrik Perimeter Product Label

Mavrik Perimeter Material Safety Data Sheet (MSDS)

Mavrik Perimeter Supplemental Label

Mavrik Perimeter - 8 oz.

Mavrik is with a broad spectrum pyrethroid that controls an array of pests that infest areas around the perimeter of residential and commercial buildings. Mavrik provides immediate knockdown of a variety of insects including ant and mosquitoes outsdoors and once dried, it leaves no visible residues or lingering odor that are non-toxic and non-repellent to honeybees.

For Use in and around: Lawns, Gardens, Trees, Shrubs, Roses, Flower beds - See the Mavrik Perimeter Label for a complete list of application sites.

How It Works

Controlling ants and mosquitoes in your customers' yards is a great way to keep both from becoming major problems in and around your customers' homes. Mavrik Perimeter contains the pyrethroid fluvalinate, which provides quick knockdown of pests.

Maxforce FC Fire Ant Bait Product Label

Maxforce FC Fire Ant Bait Material Safety Data Sheet (MSDS)

Maxforce FC Fire Ant Bait - 2 lbs.

Maxforce FC Fire Ant Bait provides effective control of fire ants with a Simply Irresistible formula and the exclusive Maxforce Domino Effect. Since foraging worker ants cannot eat solid food, they consume and contact the oil in the bait formula and carry the granules back to the nest where they are fed to the larvae. The larvae consume the bait, then regurgitate a liquid food containing fipronil that is fed to the rest of the colony, including the queens, through a process called trophalaxis. The Domino Effect is made possible by the delayed action kill of fipronil. Worker ants are able to make several trips back to the colony with bait before they die so entire colonies are controlled - even in hard-to-reach areas such as under sidewalks and driveways.

For use in and around: indoors or outdoors

Economical and easy to apply

The cost effective easy-to-use granules can be broadcast at a rate of 1.5 to 5.0 pounds per acre or applied as a mound treatment at a rate of 2 to 5 tablespoons per mound.

Labeled for application where you need it

Labeled for residential and commercial properties, Maxforce FC Fire Ant Bait can be applied to home lawns, golf courses, sod farms, commercial and recreational turf, and landscape beds.

Low dose

Great control with less pesticide. Maxforce FC Fire Ant Bait gets the job done with 0.00045% fipronil, so let your customers know you are controlling fire ants responsibly.

Application Directions

BROADCAST APPLICATIONS: Make broadcast applications of this product to turfgrass to control existing active imported fire ant populations. Apply when ants are actively looking for food; this is typically in the morning or evening. Do not apply Maxforce FC Fire Ant Bait immediately before or after irrigation or rain. Fire ants will begin to die from a proper treatment in about 14 days. Do not reapply for 3-6 weeks.

MOUND APPLICATIONS: Shake the granules uniformly around the mound, but do not disturb the mound. Broadcast the granules in a circle about 4 or 5 feet in diameter with the mound being the center of the circle. Apply when ants are actively looking for food; this is typically in the morning or evening. Do not apply Maxforce FC Fire Ant Bait immediately before or after irrigation or rain. Fire ants will begin to die from a proper treatment in about 14 days. Do not reapply for 3-6 weeks.

MaxForce Professional Bait Gun Kit

Model No. - BA42001

This high-quality, durable all-metal constructed MaxForce Professional Bait Gun is speacially designed for Professional Pest Control personnels. Also with the 12" SharpShooter which comes with this MaxForce Professional Bait Gun Kit, you can place gel in hard-to-reach areas.

Compatible with: Virtually all 30 grams gel reservoirs - MaxForce bait gel, DuPont Advion Ant, Roach bait gel, Optigard Ant gel bait, Gourmet Ant bait gel, InTice Sweet Ant gel, PT Avert Cockroach gel bait (Formula 3) and Pro-Pest Rat & Mouse Lure.

Optigard Flex Product Label

Optigard Flex Material Safety Data Sheet (MSDS)

Optigard Flex Product Brochure

Optigard Flex Liquid - 8 oz.

Optigard flex is a non-repellent insecticide that is active against insects by both contact and ingestion. It is particularly effective against social insects such as ants but can be used to control a variety of nuisance insect pests such as cockroaches, beetles, earwigs, boxelder bugs, fire ants, etc. Optigard Flex may be applied as a perimeter band, as a spot spray, as a mound drench, and to voids to control a wide range of insects. It may also be applied to trees and shrubs to control honeydew producing insects that ants use as a primary food source. Optigard Flex offers the PMP true flexibility in treating ants and nuisance insects both in and around structures.

Tips You May Need to Know

Contols broad range of economically important pests, including ants, cockroaches, and drywood termites
Versatile formulation that goes where it's needed - inside or outside, as a liquid or foam
No limit on the timing of applications
Systemic activity in plants helps control honeydew-producing insects that serve as food source for ant pests
Advanced non-repellent chemistry which transfers throughout social insect populations for better control with less product
For Use in and around: Residential and commercial

Application of Optigard Flex Liquid

Optigard Flex is effective against a variety of ants and other nuisance pests. Application of Optigard Flex to void areas provides an additional point of treatment for nuisance pest problems. Application of Optigard Flex to structural voids is complemented by perimeter insecticide and bait applications. In addition to ants, Optigard Flex controls other nuisance pests, including beetles, crickets, boxelder bugs, ladybird beetles, earwigs, cockroaches, fire ants, etc. Control of these pests can be achieved by injecting 2-4 oz. of foam at multiple points in voids of target areas where ants or other pests are trailing into a structure, or in areas near plumbing penetrations in kitchens or bathrooms, where pests often seek food or moisture. Applications inside void areas should be directed at the lower six inches near the sill plate.

Optigard Flex has exhibited excellent non-repellent activity against drywood termites. Application of Optigard Flex for zone or spot treatments of drywood termites should focus on controlling active infestations. Optigard Flex may be applied with equipment suited for injection of foam into termite galleries in wood. Optigard Flex is compatible with a wide range of foam-generating equipment, including hand-pump or power models. Injections should be made by drilling into termite galleries and applying a foam preparation of Optigard Flex into each injection hole.

In addition to void applications, crack-and-crevice or spot applications may be made to control cockroaches in areas not easily accessible to humans. Treatment areas include points or cracks between different elements of construction, spaces between equipment and floor or wall, openings leading to voids in walls, spaces beneath equipment or cabinets, or spaces between trim and floors or walls. As a spot or crack-and-crevice treatment, apply 0.1% Optigard Flex dilution directly into cracks and crevices or other non-exposure areas as a low pressure spray using equipment capable of delivering a pin stream of insecticide.

Optigard Flex may be applied as a perimeter band around structures to control ants and other occasional insect pests. See label for specific application instructions.

In addition, Optigard Flex Liquid can also be applied to landscape ornamentals as a foliar spray or banded drench around the base of the plants to control honeydew producing insects and thus, the ants that feed on their honeydew secretions.

Phantom Termiticide/Insecticide Product Label

Phantom Termiticide/Insecticide Material Safety Data Sheet (MSDS)

Phantom Termiticide/Insecticide NY Brochure

Phantom Insecticide Termite Control - 21 oz.

Phantom is a powerful insecticide for control of termites, ants and other pests indoors and outdoors. Primarily used for termite control, Phantom offers an alternative way to control these subterranean pests. Unlike repellent pesticides, Phantom is a non-repellent contact insecticide that is undetectable to termites and other pests. This prevents termites from avoiding barriers or finding gaps in treatment barriers. Termites are killed as they move through Phantom barriers, eliminating infestations for good.

Why Should You Use?

Phantom kills termites instead of repelling them.
Kills termites by ingestion and contact.
Controls populations much faster than bait systems.
Responsible, low-dose treatment, with virtually no odor.

Directions for Use

Phantom is a liquid concentrate designed to provide treatment zones in and around structures. Primarily intended for termite control, Phantom can also be used to control pests such as ants, cockroaches, bed bugs and other pests. Follow mixing instructions and apply the product as directed in the product label. The technician must be familiar with termite control practices and regulations for effective use of this product. Solutions may be converted to foam by mixing compatible foaming agents for foam applications. Use Phantom for pre- and post-construction treatment of structures using suitable termite contol techniques and application equipment. Apply as a low-pressure spot or crack and crevice spray for residual pest control inside and outside structures.

Where to Apply

Phantom Termiticide & Insecticide is for use in and around houses, apartments or other residential structures, meat, poultry & egg processing and packaging plants, food/feed handling and non-food/feed handling areas of food handling establishments, commercial, institutional, warehousing and industrial establishments.

Premise 75 Product Label

Premise 75 Material Safety Data Sheet (MSDS)

Premise 75 WSP

Premise 75 WSP can be used indoor as outdoors with a long lasting, effective termite control. Premise 75 WSP works well for Subterranean Termites, Drywood and Dampwood termites. Premise 75 WSP not only repels termites like the other WP but also kills on contact. Since the Premise 75 WSP is a contact kill it will kill any other pest that come in contact with the infested pest.

Directions for use of Premise 75 WSP

Structures that contain wells or cisterns within the foundation of the structure can only be treated using the treated back fill method described in the treatment around wells and cisterns section of this label. Consult state and local specifications for recommended distances of wells from treated areas, or if such regulations do not exist, refer to Federal Housing Administration Specifications (H.U.D) for guidance.
For Mixing directions refer to the label

Control- General

Treatment standards for subterranean termite control may vary due to regulations, treatment procedures, soil types, construction practices and other factors. The purpose of chemical soil treatment for termite control is to establish a continuous chemical soil treatment for termite control is to establish a continuous chemical treated zone (horizontal and/ or vertical as needed) between the wood and other cellulose material in the structure and the termite colonies in the soil. Follow all federal, state, and local regulations and treatment standards for protection of a structure from termites. In some instances where an aerial or above ground colony is established, supplemental treatments to control the termites, landscape modifications, and. or structural repairs may be needed to deprive termites of a moisture source.

Pre- Construction Treatment

Do not apply at a lower dosage and/ or concentrations than specified on this label for application prior to installation of the finished grade. Prior to each application, applicators must notify the general contractor, construction superintendent, or similar responsible party, of the intended termiticide application and intended sites of application and instruct the responsible person to notify construction workers and other individuals to leave the area to be treated during application and until the termiticide is absorbed into the soil.

Post Construction Treatment

Concrete Slab on ground: to apply a treatment under the slab, including attached porches, carports, entrance platforms, garages, and similar slab structures, it may be necessary to drill the slab or exterior foundations. Drill holes should be spaced in a manner that will allow for application of a continuous chemical treated zone. Treat all existing cracks and cold, construction or expansion joints. Also, treat around bath traps, plumbing and utility services which penetrate the slab. Apply 4 gallons of solution (see application volume) per 10 linear feet per foot of depth to provide a uniform treated zone. Plug and fill all drilled holes in commonly occupied areas with a suitable sealant. Plugs must be of non- cellulose material or covered by an impervious, non- cellulose material.
An application should be made by trenching or trenching and ridding around the outside of the foundation wall. Apply 4 gallons of solution ( See Application Volume) per 10 linear feet per foot of depth to provide a uniform treated zone. When trenching, the trench along the outside foundation should be about 6 inches wide and 6 inches deep. Use a love pressure spray to treat soil as it is being placed in the trench. Ridding can be done from the bottom of a shallow trench. When ridding, rod holes should be spaced in a manner that will allow for a continuous chemical treated zone. Not to exceed 12 inches, to be deposited along the treated area. Rod hole depth should be should not extend below the footing.

Bath Traps: Exposed soil or soil covered with tar or a similar type sealant beneath and around plumbing and/ or drain pipe entry areas should be treated with 3 gallons of solution per square foot. An access door or inspection vent should be cut and installed if not already present. After inspection and removal of any wood or cellulose debris, the soul can be treated by ridding or drenching the soil.

Control Of Wood Infesting Pests:

For control of above ground termites and carpenter ants is localized areas, apply a 0.05 to .01% solution or sufficient volume of Premise 75 Insecticide foam to void and galleries in damaged wood, and in spaces between wooden structural members and between the sill plate and foundation where wood is vulnerable. Applications may be made to inaccessible areas by drilling, and then injecting the suspension or foam with a suitable directional injector into the damaged wood or wall voids. Termite carton nests in building voids may be injected with a 0.05 To0.1 suspension or foam. Multiple injection points to varying depths may be necessary. It is desirable to physically remove carton nest materials from building voids when such nests are found. Application to attics, crawl spaces, unfinished basements, or man made voids may be made with a coarse fan spray of 0.05 to 0.1% solution or foam to control exposed worker and winged reproductive forms of termites or carpenter ants. This type of application is intended to be a supplemental treatment for control of above ground subterranean termites and carpenter ants. (... continued in the label...)

Premise 2 Termiticide Product Label

Premise 2 Termiticide Material Safety Data Sheet (MSDS)

Premise 2 Termiticide Foaming Instruction

Premise 2 Termiticide - 240 ml.

Premise is a non-repellent termiticide from Bayer. Unlike repellent barriers, Premise leaves treatment zones that are undetectable to termites. What makes Premise better than repellent termiticides is that it kills termites instead of driving them away. As termites burrow or forage for cellulose, they are exposed to the active ingredient. Social insects such as termites exhibit trophallaxis or shared feeding which makes them vulnerable to Premise. The active ingredient is spread throughout the colony as workers contact other termites. In addition, the contaminated food source is consumed by the colony members and the poison spreads like wildfire.

Why Should You Use?

Premise prevents infestations by killing the Wood Destroying Organism. Premise 2 Termiticide, a product manufactured by bayer, is long lasting and works great when treating localized areas of known subterranean activity, it can be used to treat drywood and dampwood termites as well.

Directions for Use

Prepare a diluted spray solution by mixing Premise with water. Follow the mixing table found in the product label. Fill applicator tanks 1/4 or ⅓ full of water and place the end of the treating tool inside the tank and begin bypass agitation. Add the appropriate amount of Premise followed by the remaining volume of water. Allow recirculation for 2 to 3 minutes. Always follow the application rates and methods in the product label. Apply using proper application equipment. Use this product for pre-construction treatments, post-construction treatments or for general pest control. Technicians should be familiar with termite control practices and regulations in order to maximize the product's efficiency.

The recommended application volume for is 4 gallons per 10 linear feet. If the soil cannot accept the recommended application volume, use 2 gallons of solution per 10 linear feet. Active ingredient concentration must be raised from 0.05% to 0.10% to deliver an equivalent amount of Premise to soil.

For foam applications, mix appropriate amount of Premise in water and add the recommended amount of foaming agent. See the product label for the mixing table. For effective use of this product, carefully read the product label for detailed instructions in mixing and application.

Where to Apply

Premise is for use in pre- and post-construction stages of residential, commercial and industrial buildings and structures.

Premise Granules Product Label

Premise Granules Material Safety Data Sheet (MSDS)

Premise Granules Termiticide -3.6 lbs.

Premise Granular unlike other termites products have a domino affect on the termites. Premise is not a repellent but kills the termite that has been exposed over a period of time, if the exposed termite comes in contact either by feed or grooming it will kill them as well. Use Premise Granular in the soil around the house surroundings. Premise attacks more then one termite at a time giving it a domino affect that wipes out the whole colony in the end.

Apply to:

Bare soil, landscaped areas, turf grass and mulch areas
Areas surrounding structures that are subject to termite attack
Non-structural wood-to-soil contact situations
Quick and easy -- start killing termites instantly.
Can be used before full structural treatment
No mixing or set-up time
No water needed to apply
No bulky, heavy equipment needed

Active ingredient: imidacloprid, is tried and true More effective than repellent insecticides which rely on barriers that pests can simply walk through Instead, termites walk or tunnel through treated areas.

Premise Granules is Backed by Bayer,TM which means it backed by Bayer science and service, no extra charge:

Training, at your location or ours BayerES Mobile University, the 5th Week Training Series, Coast to Coast seminars and convenient web programs.Technical experts who troubleshoot problems
Marketing tools you can customize for your business

Pro Citra DL Product Label

Pro Citra DL Material Safety Data Sheet (MSDS)

Pro Citra DL Botanical Insectcide (Orange Oil) - 17.5 oz.

From Whitmire Micro-Gen's line of all natural insecticides, Pro Citra contact kill aerosol offers the same performance as synthetic insecticides without the toxicity. This natural, broad label product targets several common household insects such as ants, roaches and termites. Its active ingredient is d-Limonene, a botanical insecticide with very low toxicity to humans. This makes the product ideal for use in sensitive accounts such as schools, nursing homes and hospitals.

Why Should You Use?

Pro Citra does not contain synthetic active ingredients that are usually toxic.

ProCitra-DL is a botanical-based insecticide ideal for Crack and Crevice and spot treatment in both food and nonfood handling areas. It controls a wide variety of pests including ants, cockroaches, fleas and spiders and may be used in sensitive accounts such as schools, nursing homes, food processing plants, hospitals and government buildings.

Directions for Use

Pro Citra-DL is intended for crack and crevice and/or spot treatments only in food and non-food handling areas. Use this product with the supplied actuator and injection tubes. Place injector tip into cracks, crevices and voids where insects typically hide. Move injector tip along small openings at the rate of 3 linear feet per second for light infestations and one linear foot per second for heavy infestations. Treat close voids at the rate of one to five seconds per three cubic feet. For spot treatments, hold the container upright and direct the nozzle 12 inches from the surfaces. Treat areas under sinks, around pipes, refrigerators, stoves, washing machines, areas around cabinets, baseboards, floor drains, utility boxes and other infested sites. Contact insects as much as possible. Reapply as necessary. Read the product label for more information.

Where to Apply

Pro Citra Botanical Insecticide is for indoor use in apartments, homes, hotels, hospitals, nursing homes, schools, day care centers, food storage areas, restaurants, food processing plants, supermarkets, utilities, warehouses, modes of transport (buses, trains, trucks, ships), and other commercial, institutional and industrial buildings.

Product Label

Material Safety Data Sheet (MSDS)

Suspend SC Brochure

Suspend SC - 1 Pint

Suspend SC provides effective knockdown and long term residual control of over fifty pests. Very low usage rates makes the product safe to use in food handling areas, mattresses, furniture, cushions and other surfaces where sensitivity is an issue. Suspend SC residues have no odor or visible residues and will not damage surfaces where water alone causes no damage.

Why Should You Use?

Suspend is more economical, flexible and effective compared to other concentrates.

Directions for Use

Mix Suspend with water following the dilution rates in the product label. Active ingredient concentration in solutions range from 0.01% to 0.06%, depending on the target pest/s. Apply using hand pressurized or power operated sprayers. Shake well before using. Partially fill applicator tanks 1/2 full with water before adding the proper amount of concentrate. Agitate the tank and add the remaining volume of water. Re-agitate to obtain a uniform mixture. The product may be tank mixed with currently registered pesticides and insect growth regulators unless prohibited by the product label. Solutions can be converted to foam used in treating structural voids. Mix Suspend SC with a foaming agent following the mixing instructions as indicated in the foaming agent label.

Use finished solutions for crack and crevice, spot and surface treatments indoors. Use 0.25 to 1.5 ounces of Suspend per gallon of water to treat 1,000 square feet of surface. Apply as a coarse low pressure spray to cracks, crevices, voids and other sites where insect live, feed and breed. Apply as directed in the product label.

Use Suspend SC as a residual or broadcast spray to perimeters, lawns, grounds, landscapes and ornamental plants. Apply as a coarse, low-pressure spray to outdoor building surfaces, porches, patios, eaves, screens, window frames, garbage dumps, lawns and ornamental plants. Treat a band of soil 6 to 10 feet wide around and adjacent to buildings and structures. Treat foundations up to a height of 3 feet.

Control wood-damaging insects by applying spray or foam solutions having 0.06% Deltamethrin. Using the appropriate application equipment, apply solutions to infested surfaces and damaged wooden structures. Inject solutions inside termite carton nests and damaged wood. Drill holes if necessary. Apply as a coarse fan spray to exposed insects and infested surfaces.

For broadcast application in lawns, apply using a minimum of 2 gallons per 1,000 square feet. Use higher volumes for adequate coverage of thick foliage. Apply thoroughly and uniformly over turfgrass and ornamentals.

Where to Apply

Suspend SC is for residential, commercial, industrial and institutional control of the listed pests. Areas of use include apartments, bakeries, bottling facilities, breweries, cafeterias, canneries, food manufacturing and processing plants, food service establishments, granaries, hospitals, hotels, kitchens, laboratories, nursing homes, office buildings, restaurants, schools, warehouses and transports such as aircraft, buses, mobile homes, ships, trailers and trucks.

Product Label

Material Safety Data Sheet (MSDS)

Talstar EZ Granular Insecticide - 25 lbs.

Talstar EZ Granular Insecticide uses a method contact kill method to get rid of pests. The same formula as the Talstar PL, Talstar EZ Granular has bigger granular to make spreading easier. Talstar EZ can be used in residential and recreational areas/ fields, parks and around industrial buildings. To make the spreading easier we recommend that you use a type of handle spreader to get an even spread. Also Talstar EZ work better when the product is wet so watering the area after the product has been spread is a good idea. Talstar EZ Granular does not dissolve in water but it will allow it to go into the ground preventing the pest to come near home entrances or surroundings.

Useful Tips You Should Know:

Product disappears and disperse when wet.

Will not leave stain or residue on concrete.

Safe to use around plants.

Talstar EZ comes in a resealable bag to keep freshness.

For Use in and around: Lawns, Perimeters

Talstar EZ Granular Description:

The power of Talstar in a convenient granular formulation. Talstar EZ granular features a grain technology that allows the particles to disperse and disappear upon wetting without staining concrete or damaging plants. This formulation is easy on the applicator, easy to calibrate and easy to spread. And, Talstar EZ won't leach out of the top-treated zone, meaning longer residual and better insect control.

Put an end to fire ant colonies fast. The Talstar EZ granular program is proven to eliminate dangerous fire ant invaders within 24 hours, allowing you to give customers their yard back when they want it. For quick and reliable colony control and long-term protection against reinfestation of invading fire ants, combine treatment with an application of Talstar Professional insecticide.

LAWN AND PERIMETER APPLICATIONS

Lawn Application: Broadcast Talstar EZ granular insecticide with suitable application equipment to ensure uniform coverage over the treatment area.

Talstar PL Granular Product Label

Talstar PL Granular Material Safety Data Sheet (MSDS)

Talstar PL Granular Insecticide - 25 lbs.

Talstar PL Granular is different from Talstar EZ it has an unique sand core granular structure. It is a lot finer then the EZ. Talstar PL release its chemical through out time as it rains. Talstar PL can be used to treat not only residential but commercial and recreation centers as well. Once the Talstar PL is inside soil it will protect by killing the pest as well as preventing pest problems. For lawn areas the application of the Talstar PL can last 2- 3 mos. One recommendation is to use a form of handle spreader to evenly spread the granular.

Useful Tips You Should Know: Do not exceed 0.2lb of Talstar PL per acre in residential use, and 0.4lb of Talstar PL per acre in commercial use.

Avoid using in commercial greenhouses or areas where grass is grown for seeds. Safe around non targeted animals.

General Information of Talstar PL Granular Insecticide Talstar PL granular has a sand core granular structure that penetrates mulch with no odor and no watering needed. It's heavy and dust-free so it won't drift off target. And it remains on the soil surface so it's effective even after irrigation or rainfall. Labeled for a broad spectrum of perimeter pests, Talstar PL granular controls everything from fleas, ticks and flies to mosquitoes, mites and millipedes. Talstar PL granular provides two to four months of effective, long-term residual protection. Low application rates make it an excellent, cost-effective choice for building and foundation perimeters. Put an end to fire ant colonies fast. The Talstar PL granular program is proven to eliminate dangerous fire ant invaders within 24 hours. For quick and reliable colony control and long-term protection against reinfestation of invading fire ants, combine a mound treatment with a broadcast application of Talstar PL granular.

To ensure optimum control, irrigate the treated area with up to 0.1 inches of water immediately after application to activate (release from the granule) the insecticide.

Tempo SC Ultra Product Label

Tempo SC Ultra Material Safety Data Sheet (MSDS)

Tempo SC Ultra - 8 oz.

Tempo SC Ultra is an odor less and stainless product. Tempo SC is concentrated formula that is mixed with water before using. Tempo SC Ultra is used both indoors and outdoors. One bottle of Tempo Ultra makes up to 30 gallons. When using this product we recommend that you use a pest control product tool such as Chapin Premier 1 or 2 Gallon sprayer.

Application with Tempo SC Ultra

Apply where pests have been seen or found, or can find shelter (in and around buildings and structures, on residental, commercial and recreational areas of turf, on ornamentals in landscapes and interior plantscapes). Makes up to 30 gallons of finished spay solution for indoors. Treats up to 30,000 sq ft. outdoors. Mix the appropriate amount of Tempo SC with water. May tank mix with other pesticides currently registered for similar uses. Reapply every 7 to 10 days, if needed. For turf, reapply if needed, but not more than 6 times per year.

Product Label

Material Safety Data Sheet (MSDS)

Tempo Ultra WP - 420 grams

Tempo Ultra WP has a fast knockdown kill, meaning the minute they come in contact with the insecticide they will die. Tempo Ultra WP will leave no to almost no residue when sprayed and odorless. Tempo Ultra WP will last up to 30 days, continuously killing pests. Tempo Ultra WP can be used indoors and outdoors as well as food handling facilities.

General Household Pests: Ants (except Pharaoh), Bedbugs, Carpet Beetles, Centipedes, Clothes moths, cluster fly, Cockroaches, Crickets, Darling beetles, Earwigs, Firebrats, Millipedes, Pillbugs, Silverfish, Sowbugs, Spiders, Flies, Gnats, Hornets, Midges, Moths, Wasps, Yellow Jackets

FOR USE IN:

Areas where pest have been seen or found, or can find shelter. In and around buildings and structures. One residential, commercial and recreational areas if turf. On ornamentals in landscapes and interior plant scapes.

Mixing Direction for Tempo Ultra WP:

Mix the appropriate amount of Tempo Ultra WP with water. May use tank mix with other pesticides currently registered for similar uses, unless specifically prohibited. Use in general surface spot, mist, or crack and Crevice application. Re-apply every 7 to 10 days, in needed. Make sure to cover or remove all food processing and handling equipment before treatment.

Temprid SC Product Label

Temprid SC Material Safety Data Sheet (MSDS)

Temprid SC Supplemental Lable

Temprid SC Insecticide - 400ml

Temprid SC (Suspension Concentrate Formulation) insecticide is an easy-to-use and provides quick knockdown and long residual control of more than 50 pests by combining the broad spectrum, fast-acting control of beta-cyfluthrin with the systemic residual control of imidacloprid to provide premium performance and effecacy.

Tempirid SC's Advantages:

Delivers unsurpassed ant control.
Also eliminates aphids, scale and mealy bugs that produce honeydew, a preferred food source of many ant species.
The only perimeter pest control product you will ever need
Broad spectrum insecticide - controls perimeter pests that some competitive products don't.
Flexible label.
Can be applied outdoors and indoors.
Can be applied as a perimeter application 3 ft up and 10 ft out from the structure.
Better pest stopping power than non-repellents.

Product Label

Material Safety Data Sheet

Tengard SFR One - 1 Quart

Tengard SFR One's active ingredient has the ability to kill over 75 different types of pest. The permethrin in Tengard SFR One has a long lasting and increases effective. Tengard SFR One can be used indoors and outdoors, when used outdoors it dispersed in the soil and establish a barrier between the structure and the termites in the soil. Tengard SFR One is a pesticide that kill pest but also as a prevention.

Mix the termiticide use dilution in the following manner:

1. Fill tank 1/4 to 1/3 full.
2. Start pump to begin by-pass agitation and place end of treating tool in tank to allow circulation through hose.
3. Add appropriate amount of Tengard SFR. (See Rate/Volume Conversion Chart)
4. Add remaining amount of water.

Application Volume: To provide maximum control and protection against termite infestation apply the specified volume of the finished water emulsion and active ingredient as set forth in the directions for use section of this label. If soil will not accept the labeled application volume, the volume may be reduced provided there is a corresponding increase in concentration so that the amount of active ingredient applied to the soil remains the same.

NOTE: Large reductions of application volume reduce the ability to obtain a continuous barrier. Variance is allowed when volume and concentration are consistent with label directed rates and a continuous barrier can still be achieved.

Termidor SC Product Label

Termidor SC Material Safety Data Sheet

Termidor SC Brochure

Termidor SC - 20 oz.

Termidor SC is a water-based suspension concentrate termiticide that is made with 9.1% Fipronil. It is one of the most trusted products on the market for pre and post construction termite applications to both houses and business buildings. Moreover, Termidor is actually listed for a variety of perimeter pests and wood infesting pests. Applied at 0.8 fluid ounces per gallon of water for a 0.06% dilution rate, a 20 ounce bottle of Termidor can yield 24 gallons of emulsion.

Use Termidor for different types of control:

Termite control: Protect your family and your home from termite infestations by using Termidor for ground treatment or for surface treatment. For ground treatment, use Termidor to trench around your home. Dilute Termidor SC with water and pour into 6 inch deep holes every ten linear feet around the perimeter of your house or business to protect the structure from termite infestations. Also use Termidor SC to spot treat inside your home in the wall void or for pre-construction termite control treatment. (Refer to the product label for detailed instructions on how to apply Termidor or on how to use Termidor for ground treatment)

Ant Control: Termidor SC can be used as a surface treatment outdoors to control ant infestations. Mix Termidor in appropriate dilution rates (refer to product label for all the correct dilution rates) and use a pump sprayer to spray around perimeter of the structure. You can use Termidor as a barrier treatment around the structure to protect your home from such species of ants as Carpenter ants, Crazy ants, or Argentine ants.

BASF, one of the most renowned manufacturing companies for pest control products, have produced Termidor to protect your homes from current termite infestations as well as prevention for reoccurring termite infestations. It is the #1 termite defense products on the market right now. It is a termiticide that can be applied in several different ways making this product one of the most flexible application options available for termite control. Even if there are no existing termite infestations in your home right now, be aware that Termidor is powerful enough to ensure prevention of future infestations for at least 10 years.

Termidor SC proves its efficacy because the manufacturers of this product have tested and proven that its advanced liquid technology is something that is the most effective on termites right now. Its undetectable, non-repellent characteristic allows termites to go about their everyday routines without smelling, tasting, seeing, or avoiding the product. Instead, as they go through their routines, termites come in contact with the product and are able to ingest and share it, while being completely oblivious to the consequences of doing so.

BASF has labeled the effects of Termidor SC as the Termidor "Transfer Effect" which acts like the common "domino effect" but for termites. When a termite ingests or comes in contact with the product, the termite can then become a medium or a carrier of the chemical and they are able to then transfer it to the other termites of the colony without being aware of their doings. The termites that contract the poison from the initial carriers then become "secondary carriers" of Termidor, all the while, behaving as they normally do during their daily routines. Eventually, Termidor is able to contaminate all termites of the colony and ultimately eliminate them. Because of the slow-action release, Termidor allow just enough time for each termite to contract the poison and allow them to transfer it to other termites. This "transfer effect" is a unique type of effect for termite control that is like none other and proves to be devastating to the termite colony that has infested your home.

Termite baits can actually take several years for the termite colonies to find them. Meanwhile, termites continue to reproduce, the colony continues to grow, and your largest investment is vigorously attacked and slowly becomes ruined. Termidor, however, begins to show results immediately and wipes out entire colonies that surround the structure.

Termidor's versatility in how it eliminates termites proves its efficiency. Not only is Termidor an ingestion kill poison but it a contact kill as well. Since termites are unable to detect the chemicals while they are working and moving, termites continuously and unknowingly come in contact with Termidor.

Not only is Termidor good for termite control but Termidor SC can actually be used for ant control as well. It is one of the most powerful control products for carpenter ants and even other species of ants like Argentine ants and crazy ants. Termidor can be applied to the exterior of foundation walls and by doing so, Termidor creates a protective barrier from ant species that may try to enter your home.

Keep in mind that Termidor is labeled for outdoor use only. It can only be used "indoors" when you are applying Termidor as a spot treatment in the wall void or under the flooring. It cannot be used indoors for ant control or for other pest control and cannot be directly applied to your children or pets.

Please refer to and follow the instuctions on the Termidor SC product label.

Terro PCO Product Label

Terro PCO MSDS

Terro-PCO Liquid Ant Bait Stations

Terro-PCO is the #1 selling liquid ant bait in the U.S. Its super-sweet attractant instantly attracts ants, which flock to it in minutes. It controls and kills all common household ants and their colonies. Its super-sweet bait may lure ants quickly, but Terro-PCO's ultimate effect on target pests comes from the way the boron molecules in its active ingredient interfere with a pest's metabolism. Because pests cannot excrete excess boron as humans and other organisms can, the boron builds up in their systems and ultimately interrupts the normal chemical process of transforming food into energy. So, by ingesting Terro-PCO, the insect is unable to extract nutrition from its food and effectively starves to death. Humans, pets and other living things don't share the risk because they are able to excrete excess boron from their bodies.

For Use and around: Homes, Hospitals, Restaurants, Apartments, Grocery Stores, Institutional Buildings, Schools, Cafeterias, Warehouses, Storage Areas, Food Processing Plants, Mobile Homes, Boats, Military Bases, Theaters, Nursing Homes and on Military, Commercial and Cruise Ships.

*Do not use in DO NOT USE in edible product areas of food handling establishments, restaurants or other areas where food is commercially prepared or processed. Do not use in serving areas while food is exposed. Avoid contamination of feed and foodstuffs. Place bait in areas inaccessible to children and pets.

Description:

For roach gel: Application rate is dependent on level of infestation and species to be controlled. Bait can be applied as spots or as a bead in cracks and crevices. The lower application rate should be used for low to moderate infestations or re-treatments, and the higher rate for more severe infestations or where the population occurs in inaccessible areas, such as in walls. Gel placements should be at or near harborages or aggregation areas, such as corner, areas of movement or cracks and crevices. Numerous small placements will provide faster control than few larger spots, especially for German cockroach control.

How to use:

Terro-PCO Liquid Ant Bait now comes as an easy-to-use, pre-filled liquid ant bait. Ants will enter, feed and return to the nest where they will pass on the Terro-PCO Liquid Ant Bait to the rest of the colony.

1. Break pre-filled baits apart from the plastic frame.
2. Hold bait upright and cut off orange-colored section.
3. Place baits, label side up, near ant trails or close to where ants are numerous. Place additional baits anywhere ants may enter the home. For best results, use seven baits to ensure sufficient supply for the ants.
4. Monitor regularly for activity but do not interfere with the ants or baits. Replace with additional baits when first set is depleted.
5. Once ants are controlled, replace baits every three months to keep ants from returning.

CY-Kick Aerosol Product Label

CY-Kick Aerosol Material Safety Data Sheet (MSDS)

CY-Kick Aerosol - 17.5 oz.

CY-Kick Aerosol is a residual insecticide that kills pests instantly. CY-Kick aerosol is used for cracks and crevices, spot, and void treatments. CY-Kick residual aerosol, with Cy-Kick CS's unique microcapsule suspention technology, leaves a flim on a surface applied as a residual to keep on killing pests for weeks. Since with Cy-Kick's low odor fomula, it is one of the best and perfect products for residential, food handling, and sensitive areas of indoor treatment.

Advantages of Cy-Kick Aerosol

Excellent knockdown and residual properties
Broad spectrum activity
Ideal for use in both residential and commercial accounts
Great for wood injection

Indoor Treatments with CY-Kick Aerosol:

Apply as a Crack and Crevice treatment using the prescribed dosage into cracks, crevices, and void spaces where insects may be harboring. These may include, but are not limited to, openings aroind pipes and sinks, under refrigerators, behind baseboards, washing machines, stoves, cabinets, sewers, floor drains, and meter boxes. Spot treatment may also be made to areas including, but not limited to: storage areas, closets, around water pipes, doors and windows, around refrigerators, cabinets, sinks, stoves and other equipment, shelves, drawers, and similar areas.

Apply as a Crack and Crevice treatment or spot treatment into infested and egg laying sites near pet resting areas including, but not limited to: cracks and crevices of baseboards and around door and window frames.

Apply as a Crack and Crevice treatment into cracks, crevices, and voids where ants may be traveling and/or harboring, including, but not limited to, around doors, window frames, wall voids adn other structural cracks and crevices. Spot treatment may also be made to areas including, but not limited to: storage areas, closets, around refrigerators, cabinets, sinks, stoves and other equipment, shelves, drawers, and similar areas.

Apply as a Crack and Crevice treatment into cracks and crevices of baseboards, door frames, bookcases and other harborage sites. Spot Treatment may also be made to areas including, but not limited to: storage areas, closets, around water pipes, doors and windows, around refrigerators, cabinets, sinks, stoves and other equipment, shelves, drawers and similar areas.

Apply as a Crack and Crevice treatment into cracks, crevices and/or voids where these areas may include, but not limited to: cracks and crevices in cabinets and pantries, wall voids, around window and door frames, under siding and in machinery. Spot treatment may also be made to areas including but not limited to: storage areas, closets, around water pipes, doors and windows, around refrigerators, cabinets, sinks, stoves and other equipment; shelves, drawers and similar areas.

Advance 375A Product Label

Advance 375A Material Safety Data Sheet (MSDS)

Advance 375A Select Granular Ant Bait - 2 lbs.

Advance 375A Select Granular Ant Bait is specially formulated to kill common species of ants. The product contains Abamectin B1, a potent insecticide which is highly toxic to most insects including ants. The ant bait has a granular form which can be applied directly on to infested areas. Each pound of the product covers an acre of surface, suitable for use in lawns, backyards, in and around buildings.

Why Should You Use Advance 375A Select Granular Ant Bait ?

The product contains a slow-acting insecticide that is highly effective in controlling ant populations. Each 8 oz. bottle has enough granules to cover half an acre of surface area.

Directions for Advance 375A Select Granular Ant Bait Use

Use the product by sprinkling bait granules directly on to infested areas, ant trails and mounds. Please refer to the product label for application instructions.

Where to Apply Advance 375A Select Granular Ant Bait

Apply the product in and around homes, residential areas, commercial buildings, warehouses, food storage areas, garages, lawns and other inhabited areas. Avoid using the product in areas where food is processed and consumed such as dining rooms and kitchens.

Indoor Applications

Trace the infestation source by following the ant movements. Sprinkle adequate amounts of bait near cracks or crevices where ants congregate. Use application equipment or tools if necessary to induce the bait in voids. Pestmall offers such tools which can be found here.

Outdoor Applications

In broadcast applications, spread the bait evenly or in pockets in areas where ants thrive. An 8 oz. pack of the product can cover approximately half an acre of surface.

To protect structures, create a bait band measuring 1 to 2 feet around building foundations. Treat ant trails by placing small deposits of ant bait along the trail.

If ant colonies are located, apply 1.5-2.1 oz. of the product around of each mound.

Advion Fire Ant Bait Product Label

Advion Fire Ant Bait Material Safety Data Sheet (MSDS)

DuPont Advion Fire Ant Bait - 2 lbs.

For use in: Residential lawns, golf courses, recreational areas, industrial sites and other similar areas where imported fire ants, bigheaded ants and pavement ants are found.

DuPont Advion fire ant bait is the fastest acting, most effective fire ant bait available today. Combined with an alluring formulation, Advion ensures control of imported fire ants in 24-72 hours - for entire colony control - fast.

• Results in 24-72 hours
• Effective on all life stages
• Entire colony control

ADVION fire ant bait may be used to control imported fire ants, bigheaded ants and pavement ants in noncrop/nongrazed areas such as residential lawns, golf courses, recreational areas, industrial sites and other similar areas where imported fire ants, bigheaded ants, and pavement ants are found. Refer to the Use Rate table for specific treatment site examples where this product may be used to control imported fire ants.

Broadcast Treatments

Make application with broadcast equipment capable of applying 1.5 pounds of ADVION fire ant bait per acre. Calibrate and adjust equipment prior to application to ensure that the proper rate of product will be applied. Retreat after 12-16 weeks if needed.

Individual Mound Treatments

Do not disturb the mound. Do not apply to tops of mound. Apply 4 level tablespoons (0.5 oz) of ADVION fire ant bait per mound, uniformly distributing the product 3-4 feet around the mound. Retreat after 12-16 weeks if needed.

Bifen IT Product Label /

Bifen IT Material Safety Data Sheet (MSDS)

Bifen IT - 1 Quart

Bifen I/T (Insecticide/Termiticide) is one of the most potent insecticides in the market. With 7.9% Bifenthrin, the product is highly effective in controlling a wide variety of pest insects, including various species of subterranean termites. Bifen I/T is specially formulated to control termite and insect infestations around commercial, residential and industrial structures.

Why Should You Use BIFEN I/T ?

Bifen I/T contains high concentrations of Bifenthrin to control and prevent termite and insect infestations. In addition, the product leaves a long-lasting residual effect that last for months.

Directions for Bifen IT Use

Applying Bifen I/T requires the use of suitable application equipment and personal protective equipment. The product is extremely toxic. Please refer to the product label before using or handling the product. Please read the product label for information on treatments, dilutions and application methods. Depending on the target pest and the method of application, Bifen I/T should be applied using the correct methods as stated in the product label. The product can be used for broadcast treatments, perimeter treatments, crack and crevice applications, sub-slab injections and residual barrier treatments. For subterranean termite control, methods may be employed such as trenching, rodding, crack and crevice injection or absorption for effective control.

Bifen I/T can also be used to control Armyworms, Cutworms, Sod Webworms, Annual Bluegrass Weevils, Billbugs, Black Turfgrass Ataenius, Leafhoppers, Mealybugs, Ants, Centipedes, Chinch Bugs, Fleas , Imported Fire Ants, Millipedes, Mole Crickets, Ticks, Pillbugs, Sowbugs and European Crane Flies. Please read the product label for directions and mixing instructions.

Where to Apply Bifen IT

Use Bifen I/T to treat infested areas in and around residential, commercial, public and industrial buildings. The product is for use in lawns, parks, recreational areas and athletic fields.

InTice Granular Bait Product Label

InTice Granular Bait Material Safety Data Sheet (MSDS)

InTice Granular Bait Catalog

InTice Granular Bait - 5 lbs.

Rockwell Labs' InTice Granular Bait is a ready-to-use bait for controlling ants, cockroaches, crickets and other occasional invaders. InTice contains a blend of sweets, oils, protein and Orthoboric acid for maximum acceptance and control. Orthoboric acid is considered to be one of the safest insecticides and is generally safe to use around humans and animals. This active ingredient acts as a stomach poison to insects, blocking enzyme production leading to starvation and death.

Why Should You Use ?

InTice Granular Bait comes in a highly attractive formulation that insects cannot resist.

Directions for Use

FOR OUTDOOR TREATMENTS: Using spreaders, dusters and similar application equipment, uniformly apply InTice to turf sites at the rate of 4 pounds per 1000 square feet. For perimeter treatments, create a band measuring 2 to 4 feet around buildings to prevent infestations. Treat potential insect-harboring sites such as mulch beds, flower beds, wood piles, trees, compost heaps and trash areas. Treat ant trails and mounds with 1/2 to 1 ounces of InTice. The product may be used together with non-repellent insecticides having the active ingredients imidacloprid or fipronil.

FOR INDOOR TREATMENTS: Place bait in areas inaccessible to children and pets. Tamperproof bait stations may be used to prevent children and animals from accessing the bait. Apply InTice at a rate of 6 ounces per 100 square feet using hand held or powered dusters and similar applicators. Apply bait to attics, crawlspaces, under and behind appliances, closets, under sinks, wall voids, cracks and crevices, electrical conduits, around drains and other areas where insects are seen.

This product may be used in the Bait Tray.

Where to Apply

InTice Granular Bait is for use in and around residential, commercial, industrial, municipal, institutional, research, hospitality, agricultural, healthcare and educational buildings. Permitted areas of use also include food handling and food processing establishments, transport vehicles, lawns, ornamental turf, golf courses and parks.

Demon WP Product Label

Demon WP Material Safety Data Sheet (MSDS)

DEMON WP Insecticide - 1 Envelope

Syngenta's Demon WP is an odorless, water-soluble insecticide that delivers quick knockdown and lasting residual control of over 30 pests. The product contains 40% Cypermethrin, one of the most reliable pyrethroids to control indoor and outdoor pest infestations. Demon WP is available in convenient 1-lb jars with scoops and in envelopes which greatly reduces the efforts of mixing. One pound of the product makes up to 50 gallons of finished solution.

Why Should You Use DEMON WP?

Demon WP is a broad label insecticide providing fast kill and long-term residual control at a lesser cost.

Directions for DEMON WP Use

Demon WP is in the form of soluble powder that is intended for water dilutions. Following the dilution rates found in the product label, add measured amounts of Demon WP to water to produce the desired amount of solution. Compatible pesticides may be mixed together with the product unless prohibited by the product label. Use the finished solutions for surface treatments, crack and crevice treatments or spot applications. Apply solutions using handheld or powered sprayers, crack and crevice injectors or paint brushes.

Permitted areas of use in nonfood/nonfeed areas include, but are not limited to: aircraft (cargo and non-cabin areas only), apartment buildings, boiler rooms, buses, closets, correctional facilities, decks, entries, factories, fencing, floor drains (that lead to sewers), food granaries, food grain mills, food manufacturing, processing and serving establishments; furniture, garages, garbage rooms, greenhouses (non-commercial), hospitals (non-patient areas), hotels and motels, houses, industrial buildings, laboratories, livestock/poultry housing, landscape vegetation, locker rooms, machine rooms, mausoleums, mobile homes, mop closets, mulch, nursing homes, offices, patios, pet kennels,porches, railcars, restaurants, storage rooms, schools, sewers (dry), stores, trailers, trees, trucks, utility passages, vessels, vestibules, warehouses, wineries, and yards.

Repeat treatments as necessary, but not more than once every 7 days.

Where to Apply DEMON WP

For use by commercial applicators in, on and around buildings and structures for the control of listed pests, including on lawns, ornamental trees and shrubs around residential, institutional, public, commercial, agricultural and industrial buildings; and parks, recreational areas and athletic fields.

Demon WP may be used as a general surface, crack and crevice and/or spot treatment in the non-food areas of food handling establishments. Examples of non-food areas include garbage rooms, lavatories, floor drains (to sewers), entries and vestibules, offices, locker rooms, machine rooms, boiler rooms, garages, mop closets, and storage (after canning or bottling).

Do not use Demon WP in food areas of food handling establishments, restaurants or other areas where food is commercially prepared, processed or served. Food areas include areas for receiving, storage, packing (canning, bottling, wrapping, boxing), preparing, edible waste storage and enclosed processing systems (mills, dairies, edible oils, syrups). Serving areas (when food is exposed and facility is in operation) also would be considered a food area.

Extinguish Plus Product Label

Extinguish Plus Material Safety Data Sheet (MSDS)

Extinguish Plus Fire Ant Bait - 1 lb.

Outdoor Use 

Individual Mounds: For imported and native fire ants, harvester ants, big-headed ants, and argentine ants, use 2 to 5 level tablespoons and distribute bait uniformly around the mound. Do not disturb the mound. Do not apply more than 2 lb/acre. Do not contaminate kitchen utensils by use or storage.

Broadcast Treatment: For imported and native fire ants and harvester ants, use 1.5 lb/acre or 3 oz/ 5,000 sq ft. Broadcast bait uniformly with ground (graular spreaders) or aerial equipment. For big-headed ants and argentine ants use 1-2 lb/acre or 2-4 oz/5,000 sq ft. Broadcast bait uiformly with ground (granular spreaders) or aerial equipment.

Apply when ants are active and foraging (when soil temperature is greater than 60 F). To determine if ants are foraging (feeding), place a potato chip near the mound and observe if ants begin feeding. Do not apply product if ants do not feed within a few minutes. Repeat observation at a later time to evaluate if ants are feeding. Apply product when feeding occurs on the potato chip. Repeat applications as needed. Do not apply product within 6 hrs of a rain event. Apply product when area is dry from dew or irrigation. Do not irrigate for 24 hrs after applicaton. The bait will become unattractive to ants if it becomes wet. Ants that are actively foraging will begin picking up the bait soon after application.

Refillable Bait Stations: Use Extinguish Plus in refillable bait stations. Place up to 1 oz (2 tablespoons) of Extinguish Plus per refillable bait station. Place stations along the perimeter of a structure or fence line with 1 station every 15 to 30 linear feet. Locate stations near potential pest entry points of a structure or near locations where pests are a problem.

Indoor Use

Using a duster or similar equipment, apply bait ONLY into cracks and crevices or other inaccessible areas such as, but not limited to, structural voids, unfinished attics, or crawl spaces. Apply 0.25 - 0.5 oz (2 teaspoons) per 100 sq ft only if the space is secured or otherwise inaccessible to children or pets.

Extinguish Plus Product Label

Extinguish Plus Material Safety Data Sheet (MSDS)

Extinguish Plus Fire Ant Bait

Outdoor Use 

Individual Mounds: For imported and native fire ants, harvester ants, big-headed ants, and argentine ants, use 2 to 5 level tablespoons and distribute bait uniformly around the mound. Do not disturb the mound. Do not apply more than 2 lb/acre. Do not contaminate kitchen utensils by use or storage.

Broadcast Treatment: For imported and native fire ants and harvester ants, use 1.5 lb/acre or 3 oz/ 5,000 sq ft. Broadcast bait uniformly with ground (graular spreaders) or aerial equipment. For big-headed ants and argentine ants use 1-2 lb/acre or 2-4 oz/5,000 sq ft. Broadcast bait uiformly with ground (granular spreaders) or aerial equipment.

Apply when ants are active and foraging (when soil temperature is greater than 60 F). To determine if ants are foraging (feeding), place a potato chip near the mound and observe if ants begin feeding. Do not apply product if ants do not feed within a few minutes. Repeat observation at a later time to evaluate if ants are feeding. Apply product when feeding occurs on the potato chip. Repeat applications as needed. Do not apply product within 6 hrs of a rain event. Apply product when area is dry from dew or irrigation. Do not irrigate for 24 hrs after applicaton. The bait will become unattractive to ants if it becomes wet. Ants that are actively foraging will begin picking up the bait soon after application.

Refillable Bait Stations: Use Extinguish Plus in refillable bait stations. Place up to 1 oz (2 tablespoons) of Extinguish Plus per refillable bait station. Place stations along the perimeter of a structure or fence line with 1 station every 15 to 30 linear feet. Locate stations near potential pest entry points of a structure or near locations where pests are a problem.

Indoor Use

Using a duster or similar equipment, apply bait ONLY into cracks and crevices or other inaccessible areas such as, but not limited to, structural voids, unfinished attics, or crawl spaces. Apply 0.25 - 0.5 oz (2 teaspoons) per 100 sq ft only if the space is secured or otherwise inaccessible to children or pets.

Extinguish Professional Product Label

Extinguish Professional Material Safety Data Sheet

Extinguish Professional Fire Ant Bait Supplemental Label

Extinguish Professional Fire Ant Bait - 25 lbs.

Extinguish Professional Fire Ant Bait combines (S)-Methoprene, an Insect Growth Regulator (IGR), with attractive bait that foraging fire ant workers take back to the queen. (S)-Methoprene adversely affects the queen's ability to reproduce, so when existing workers die (normally within a three-week period), no new workers are created to replace them. The result? Starvation and elimination of the entire colony.

For Use in and around: Residential Turf and Landscapes, Parks, Zoos, Golf Courses, Roadsides, Airports, Cemeteries, School Grounds, Sports Fields, Sod Farms, Forestry Sites, Perimeter of Buildings, Homes, , heds, Electrical and Phone Boxes, Pump Houses, Commercial Nurseries, including Field-Grown and Container, Stock, Crop areas *Additional sites can be found on the ExtinguishPro. Product Label.

Useful Tips You May Need to Know

ELIMINATES FIRE ANT COLONIES
STOPS THE DEVELOPMENT OF NEW MOUNDS
NO WITHDRAWAL PERIOD OR GRAZING RESTRICTIONS ON TREATED AREAS
CAN BE USED AROUND FLOWERS, SHRUBS, AND TREES
WITH PRECOR INSECT GROWTH REGULATOR (IGR)

Description

EXTINGUISH  PROFESSIONAL FIRE ANT BAIT (EXTINGUISH) contains an insect growth regulator (IGR) with specific activity to fire ants. The IGR is contained in an attractive bait that foraging fire ant workers take back to the mound to feed to the queen. IGR's are different from conventional products which provide a direct kill to fire ants. IGR's work by affecting queen reproduction. The effects of the treatment may not be immediately evident. IGR's are slower in activity than conventional products. Though slower in action, control is complete without the concern of rebounding or movement of the colony to another location. Reduction in colony size can be seen beginning at 3 weeks with colony Extinguish Professtional Fire Ant Bait will eliminate the pests within 8 to 10 weeks. When existing workers die, replacement workers are not produced, resulting in starvation and elimination of the queen and colony.

Methods of Application

General application during heat of the day or when rain is expected within 6 hours of application will reduce the effectiveness of this product. Moisture reduces the attractiveness of the bait in wet areas. In areas of heavy infestation, repeat applications may be necessary 10 to 12 weeks following the initial application.

1. Individual Mound Treatments - Treat all visible mounds with 3 to 5 tablespoons of EXTINGUISH per mound. To treat the mounds, sprinkle the adjacent areas of the mound, applying evenly in a manner to encompass the mound to a perimeter of 4 feet. Do not disturb the mound during application. Worker ants will locate the bait quickly and begin taking it back to the mound.

2. Broadcast Applications - Apply EXTINGUISH to areas at the rate of 1 to 1.5 pounds of product per acre (3.5 tablespoons/1000 ft2) using suitable application equipment. Backpack, hand, or motorized mechanical equipment may be used. No withdrawal or grazing restrictions are necessary on treated areas.

EXTINGUISH may be used as a preventative application to reduce the buildup of fire ants into unwanted areas. Two to three broadcast applications per year are recommended to prevent the encroachment and subsequent development of new mounds into an area. Repeat applications may be made as often as fire ants are observed.

3. Hopper Blend - Blend EXTINGUISH with other fire ant bait products such as ProBait   Amdro Pro, or other bait products labeled for fire ant control. When blending products, the more restrictive label will apply. Use a 50/50 mix to blend EXTINGUISH and other bait. For broadcast applications, mix the required amount of bait so that the application is made using 0.75 lbs. EXTINGUISH and 0.75 lbs. of other bait for a total of 1.5 lbs. of total bait per acre. For mound treatments, blend a 50/50 mix of EXTINGUISH and other bait and apply at the rate of 3-5 tablespoons per mound.

4. Refillable Bait Stations - EXTINGUISH may be used in refillable bait stations. Place up to 1 oz of EXTINGUISH per refillable bait station. Locate stations along the perimeter of a structure or fence line with 1 station every 15-30 linear feet. Locate stations near potential ant entry points of a structure or near locations where ants are a problem. Examples include: weep holes, foundation vents, stairs, decks, patios, picnic areas, utility areas, and other areas frequented by ants. Inspect stations frequently and replenish bait if soiled or wet. Affix a sticker to bait station indicating the contents.

INDOOR USE

Use EXTINGUISH indoors in homes, residences (apartments, nursing homes), commercial buildings and warehouses, and any other structures where ants may enter. Also for use in non-food/feed areas of institutions, restaurants, commercial food processing areas, including poultry and livestock operations. Apply bait as a crack, crevice, and void treatment or to areas that are inaccessible such as attics, crawlspaces, and wall voids. Apply 0.25 ~ 0.50 oz per crack, crevice, or void. For use in attics or crawlspaces, use 0.25 oz per 100 square feet in those areas that are inaccessible to children or pets.

Bait Plate Usage Guide

Bait Tray Stations

The easy-to-use Bait Tray Stations lets you choose between different types of bait to control ants / pests. Bait Tray Station is like a station that comes with options. Bait Tray Stations unique design let you not only use one bait but two different one at the same time. Some bait for the Bait Tray Stationsrecomendations are: Maxforce FC Ant Killer Bait Gel, Maxforce Carpenter Ant Bait Gel, Optigard, Dupont Advion Ant Gel (which are all gel bait types), Mother Earth Granular, Niban Fine Granular, Maxforce Fire Ant Killer Bait, Extinguish, and Adviance 375A Select Granular Ant Bait (which are dry granular baits). Whichever you decide to use is completely up to you.

Useful Tips You Should Know:

• The bait tray can be used both indoors and outdoors.
• Allows you to use varies of bait selections.
• Clear view top allows you to keep track of heavy infested areas.

***Bait is NOT included***

Bait Tray Stations are just for people like you who want to make one's own bait. It is made out of transparent plastic, and two sided tray so you can not only use it for a custom bait, but also you can mix up two different kinds of baits like gel, liquid, granule - whatever you want. There is a hole with the tray so you can even hang it up on walls. Of course, it comes with a lid.

Talstar Pro Product Label

Talstar Pro Material Safety Data Sheet (MSDS)

Talstar Pro (formerly Talstar One) - 1 pint

Talstar Pro formerly known as Talstar One's name means one professional product for all control. Talstar Pro is able to target over 75 different pests and is great for in and outdoor uses. Talstar Pro is a long lasting residual that lasts up to 3 months, it is odorless, leaves a clear residual, leaves no stain, non- irritating on the skin and does not break down easily with rain. Talstar Pro is also well known for its effectiveness with termites. With Talstar Professional insecticide you know you'll get the job done right every time. That's because it gives you superior, long-lasting control of the toughest general pests and termites. In fact, Talstar is effective on more than 75 pests. Plus, it's approved for multiple use-sites, so you can use it almost anywhere - indoors, outdoors, industrial, commercial and food-handling areas.

Proven, flexible protection indoors. Talstar Professional is an effective insecticide that's tough on ants and general household pests. In fact, its multi-use label makes it so versatile, you can trust it to provide effective indoor control of bed bugs, fleas, flies, scorpions, spiders and cockroaches almost anywhere, including: industrial and commercial sites, kitchens, restaurants, supermarkets and food processing plants.

Reliable, long-lasting protection outdoors. For outside and perimeter jobs, Talstar Professional is labeled for a broad spectrum of perimeter pests and provides long-lasting residual control of everything from fleas, ticks and flies to mosquitoes, mites, millipedes and termites.

Plus, it's non-staining and contains no odorous or plant-damaging solvents. Once it dries, it is virtually impossible to tell where it has been sprayed. Even better, it leaves no unsightly residues and causes no known phytotoxicity.

Put an end to fire ant colonies fast. Talstar Professional can even be used to destroy fire ant colonies. Simply drench the mound for 95% control in 24 hours, and then apply a broadcast application to eliminate re-infestation of invading fire ants for up to six months.

To control Bees, Wasp, Hornets, and Yellow-Jackets apply a 0.06% emulsion. Application should be made in the late evening when insects are at rest. Spray liberally into hiding and breeding places, especially under attic rafters, contacting as many insects as possible. Retreatment may be necessary to achieve and/or maintain control during periods of high pest pressure. Repeat application is necessary only if there are signs of renewed insect activity. Important: Do not apply emulsion until location of heat pipes, ducts, water and sewer lines and electrical conduits are known and identified. Caution must be taken to avoid puncturing and injection into these structural elements. Do not apply into electrical fixtures, switches, or sockets.
In the home, all food processing surfaces and utensils in the treatment area should be covered during treatment or thoroughly washed before re-use. Remove pets, birds, and cover aquariums before spraying. Do not permit humans or pets to contact treated surfaces

Talstar Pro formerly known as Talstar One's name means one professional product for all control. Talstar Pro is able to target over 75 different pests and is great for in and outdoor uses. Talstar Pro is a long lasting residual that lasts up to 3 months, it is odorless, leaves a clear residual, leaves no stain, non- irritating on the skin and does not break down easily with rain. Talstar Pro is also well known for its effectiveness with termites. With Talstar Professional insecticide you know you'll get the job done right every time. That's because it gives you superior, long-lasting control of the toughest general pests and termites. In fact, Talstar is effective on more than 75 pests. Plus, it's approved for multiple use-sites, so you can use it almost anywhere - indoors, outdoors, industrial, commercial and food-handling areas.

Maxforce Complete Granular Insect Bait Material Safety Data Sheet (MSDS)

Maxforce Complete Brand Granular Bait -4 lbs.

Maxforce Complete is unique. The overall formula includes protein, simple sugars, fats and complex carbohydrates. However, granules within the formula contain different combinations of these irresistible food ingredients. These combinations accommodate the changing food preferences of a broad spectrum of pests and deliver superior bait acceptance throughout the year. An Ideal range of low density particle sizes can be carried by various pests, from the smallest ants to the largest cockroaches. The combination also enables you to reduce the number of products you need to carry.

Maxforce Complete Granular Insect Bait may be sprinkled around structures and/or applied to refillable/serviceable bait stations as outlined below. Sprinkle this product evenly in a 1-2 foot wide band adjacent to the structure at a rate of 0.5 oz (one tablespoon) of bait per 25 linear feet.

NOTE: Around structures the total application should not exceed 4-8 oz per 200-400 linear feet (or 0.5 oz per 25 linear feet). A typical application would be 4-8 oz adjacent to an average sized home of 200-400 linear feet. Be sure to treat areas such as porches, patios, driveways, sidewalks, flower gardens, landscape timbers and around trees, wood piles, air conditioning units and garbage receptacles.

DO NOT USE ON EDIBLE FOOD CROPS OR ON AREAS INTENDED FOR EDIBLE FOOD CROP PRODUCTION. Treat visible ant trails as well as cracks or crevices where insects (ants, roaches, crickets) may enter a structure.

Alpine Ant Bait Gel Product Label

Alpine Ant Bait Gel Material Safety Data Sheet (MSDS)

Alpine Ant Gel Bait

Alpine Ant Gel Baits are odorless, non repellent ant baits in gel form. The product contains low concentrations of Dinotefuran, a potent insecticide. The gel bait is safe for use around food areas, children and pets due to its low-toxicity formulation. The product comes in applicator tubes that are safe and easy to use.

Why Should You Use Alpine Ant Gel Bait?

Alpine Ant Gel Bait contains no allergens, making it safe for use in and around residential areas.

Directions for Alpine Ant Gel Bait Use

Use the product for spot applications or crack and crevice treatments. Apply the product by placing small pea-sized beads in areas frequented by ants such as trails, wall voids, cabinets, cracks and crevices. Apply the product in areas with low human activity. Do not apply the product to areas that are frequently washed or to surfaces that become hot such as appliances. Inspect baits regularly and reapply if necessary. Please read the product label for application instructions and recommendations.

Where to Apply Alpine Ant Gel Bait

Use the product in and around residential, commercial and industrial buildings. Place baits on areas where ants are seen entering the building. Apply the product on or near ant trails, on cracks and crevices, floors, window sills, door sills, fences, tree holes, concrete slabs, and other ant-harboring/hiding areas.

Amdro Pro Fire Ant Bait Product Label

Amdro Pro Fire Ant Bait Material Safety Data Sheet (MSDS)

Amdro Pro Fire Ant Bait - 25lb. bag

Amdro Fire Ant Bait contains Hydramethylnon, a metabolic inhibitor that is highly effective in controlling fire ant populations and colonies. The product has a slow-acting formulation that is attractive in attracting and decimating fire ants. The product's active ingredient gives worker ants enough time to transfer the bait to the colony food stores. As the queen ant and other ants consume the powerful bait, the colony's ability to gather food and produce new ants is impaired.

Why Should You Use Amdro Pro Fire Ant Bait ?

With the ability to kill off entire ant colonies, Amdro Pro Fire Ant Bait is the solution to all fire ant problems.

Target Pest(s):

Fire Ants, Little Fire Ants, Harvester Ants, Bigheaded Ants

Directions for Amdro Pro Fire Ant Bait Use

Before applications and treatments, please read the product label for application instructions and precautions. For mound treatments, distribute 2 to 5 level tablespoons directly over ant mounds. Apply Amdro Pro Fire Ant Bait using applicators such as granular spreaders and other equipment. For broadcast treatments, apply uniformly 1.0 - 1.5 lbs of the product per acre of surface area to control fire ants, little fire ants, native fire ants and harvester ants. For bigheaded ants, broadcast 1.0 -2.0 lbs of Amdro Pro Fire Ant Bait to infested areas.

Where to Apply Amdro Pro Fire Ant Bait

Use Amdro Pro to control ant infestations in lawns, landscaped areas, golf courses, parks, school grounds, picnic grounds, athletic fields and other non-cropland areas.

Phantom Termiticide/Insecticide Product Label

Phantom Termiticide/Insecticide Material Safety Data Sheet (MSDS)

Phantom Termiticide/Insecticide NY Brochure

Phantom Insecticide Termite Control - 75 oz.

Phantom is a powerful insecticide for control of termites, ants and other pests indoors and outdoors. Primarily used for termite control, Phantom offers an alternative way to control these subterranean pests. Unlike repellent pesticides, Phantom is a non-repellent contact insecticide that is undetectable to termites and other pests. This prevents termites from avoiding barriers or finding gaps in treatment barriers. Termites are killed as they move through Phantom barriers, eliminating infestations for good.

Why Should You Use?

Phantom kills termites instead of repelling them.
Kills termites by ingestion and contact.
Controls populations much faster than bait systems.
Responsible, low-dose treatment, with virtually no odor.

Directions for Use

Phantom is a liquid concentrate designed to provide treatment zones in and around structures. Primarily intended for termite control, Phantom can also be used to control pests such as ants, cockroaches, bed bugs and other pests. Follow mixing instructions and apply the product as directed in the product label. The technician must be familiar with termite control practices and regulations for effective use of this product. Solutions may be converted to foam by mixing compatible foaming agents for foam applications. Use Phantom for pre- and post-construction treatment of structures using suitable termite contol techniques and application equipment. Apply as a low-pressure spot or crack and crevice spray for residual pest control inside and outside structures.

Where to Apply

Phantom Termiticide & Insecticide is for use in and around houses, apartments or other residential structures, meat, poultry & egg processing and packaging plants, food/feed handling and non-food/feed handling areas of food handling establishments, commercial, institutional, warehousing and industrial establishments.

Maxforce Complete Granular Insect Bait Product Label

Maxforce Complete Granular Insect Bait Material Safety Data Sheet (MSDS)

Maxforce Complete Granular Bait-8 oz.

Maxforce Complete Granular Insect Bait controls ants, cockroaches, crickets, firebrats and silverfish. Ready to use and easy to apply, Maxforce contains highly attractive food grade ingredients and a slow acting stomach poison to lure and eliminate target pests. Its active ingredient is easily spread through contact and ingestion, leading to effective control.

Why Should You Use?

Maxforce Complete offers a bait formulation with superior acceptance and control properties, attracting even bait averse cockroaches.

Directions for Use

Maxforce Complete is a ready-to-use product that can be used for broadcast, spot or crack and crevice treatments using application equipment such as dusters and spreaders. When treating indoors, the product must be applied to areas that are inaccessible to children and domestic animals. The product may be placed in refillable tamper resistant bait stations to prevent access, intercept foraging insects and to extend bait life.

FOR OUTDOOR USE: To create a perimeter barrier, sprinkle a band of soil measuring 1 to 2 feet wide around and adjacent to structures at a rate of 0.5 ounces per 25 linear feet. Treat porches, patios, driveways, walkways, wood piles, flower gardens and garbage receptacles. Treat visible ant trails, cracks, crevices and other possible pest entry sites.

Tamper proof bait stations may be used when baiting near foundations, air conditioning units, faucets, in lawns and other areas where moisture is present. Inspect bait stations regularly and replace bait as needed. Place and secure bait stations in areas where they will not be damaged by mowers and trimmers.

For broadcast applications, apply uniformly at the rate of 1 ounce per 1,800 square feet of outdoor surfaces. Sprinkle 2 tablespoons of Maxforce evenly around ant mounds to control fire ants and other mound building ants.

FOR INDOOR USE: Apply up to 0.5 oz of bait per crack, crevice, voids and other sites where insects may live and hide. Apply evenly to crawlspaces and attics at the rate of 0.5 oz per 100 square feet. Do not apply the product in areas that are accessible to children and pets. Avoid contamination of food/feed handling and processing surfaces and equipment.

This product may be used in the Bait Tray.

Where to Apply

Maxforce Complete Insect Bait is for use indoors, outdoors and around buildings. Areas of use include non-food areas of residential, commercial, agricultural, institutional and industrial establishments.

Alpine Dust Product Label /

Alpine Dust Material Safety Data Sheet (MSDS)

How to Applying Dust Insecticide

Alpine Dust Insecticide - 8 oz.

Alpine Dust Insecticide is a direct contact insecticide in powder form. Like other Alpine products, the dust insecticide contains the non-repellent insecticide Dinotefuran. Alpine Dust Insecticide is tested and proven to control ants, cockroaches, bed bugs, beetles, fleas, moths, spiders, flies, wasps, millipedes and centipedes.

Why Should You Use Alpine Dust ?

Alpine Dust Insecticide provides a quick knockdown to a wide range of controllable pests. An 8 oz bottle of the product covers approximately 500 square feet.

Directions for Alpine Dust Use

Product can be applied by hand or by the use of dusters and other similar equipment to ensure uniform applications. Spread the product evenly on to infested areas following the recommended application rates found in the product label. Apply 0.15 to 0.30 oz. of the product per square yard of surface area.

Do not apply the product to surfaces where food is processed such as kitchen tables and sinks.

Do not treat pets or pet beddings with the product. Replace beddings after treating the area.

Please read the product label for application instructions and the recommended application rates. Pestmall offers Centrobulb Dusters and Bellow Dusters needed to apply Alpine Dust Insecticides.

Where to Apply Alpine Dust

Alpine Dust Insecticide is for use in and around residential, commercial and industrial buildings. Apply thoroughly and evenly to infested areas, cracks and crevices, nests, voids, corners, under sinks and shelves, storage areas and other places where insects congregate, nest and hide.

For perimeter applications, sprinkle the product around insect entry holes such as structural cracks and crevices, window sills, patios, porches and other areas where insects have access to the building.

Talstar Insecticide Residual Aerosol Product Label

Talstar Insecticide Residual Aerosol Material Safety Data Sheet (MSDS)

Talstar Insecticide Residual Aerosol - 16 oz.

For years, pest management professionals have chosen Talstar products to help them provide services of the highest quality to their customers. With an advanced aerosol formulation, professionals can deliver the power and dependability of Talstar with more ease of use than ever before! The industry's first bifenthrin aerosol product, Talstar insecticide is a must-have tool for general pest accounts of any size, virtually anywhere.

Ideal for quarterly service programs, Talstar achieves residual control equivalent to traditional liquid concentrates, providing up to three months of protection. With the addition of prallethrin (ETOC), Talstar also delivers impressive speed and knockdown.

Talstar controls over 50 indoor and outdoor pests, including ants, bed bugs, cockroaches, spiders, and termites. An extremely versatile product, Talstar can be used in homes, businesses and even within food areas and non-food areas of food handling establishments. And with its non-flammable, water-based formulation, you can apply Talstar to a variety of surfaces without having to worry about leaving a messy, oily-residue behind.

Talstar insecticide is available in a 16-ounce aerosol can and comes with a crack-and-crevice application straw. It is also compatible with the Whitmire Micro-Gen's System III.

Talstar XTRA Granular Insecticide Product Label

Talstar XTRA Granular Insecticide Material Safety Data Sheet (MSDS)

Talstar XTRA Granular Insecticide Brochure

Talstar XTRA Granular Insecticide - 25 lbs.

Lawn pests don't just crash picnics. Some, like imported fire ants, can pose a serious health risk for humans and pets. As a pest management or turf professional, homeowners count on you, to quickly eliminate these invaders and keep them from coming back. That's why FMC Professional Solutions has created new Talstar XTRA granular insecticide, a proprietary, patent-pending solution for outdoor pest control that's faster than you ever thought possible.

Fireback Fire Ant Mound Injector Product Label & MSDS

Fireback Fire Ant Spray with Mound Injector - 16 oz.

When you order 2 cans, 4 cans, or 1 case, you will get one mound injector.

Fireback Fire Ant Spray with Mound Injector comes with a unique injector rod that has omni-directional spray head and provides deep access to fire ant's mound.

Advantages of Fireback Fire Ant Spray with Mound Injector 

- Unique injector rod has omni-directional spray head and provides deep access to mound
- Immediately lowers the ants' body temperatures which disables them; this deters escape and moving of the queen
- For outdoor use only
- For use in Yards, Parks, Woodlands, Playgrounds, and Golf Courses
- "Mound-Penetrating" rod kills fire ants in their mounds

Please refer to and follow the instructions on the Fireback spray label.

FenvaStar EcoCap Product Label

FenvaStar EcoCap Material Safety Data Sheet (MSDS)

FenvaStar EcoCap - 8oz.

Fenvastar EcoCap is a microencapsulated suspension concentrate containing 0.3 pounds active ingredient per gallon.

Fenvastar EcoCap is designed to provide long residual activity against pests listed on this label when applied as surface or spot treatments or as a crack and crevice spray in and around residential and commercial structures, as well as on turf and landscaping. Fenvastar EcoCap may be sprayed on any surface that will not be stained by water. DO NOT use this product as a fogger or apply it as a space spray. Do not apply in electrical conduits, junction and switch boxes, motor housings, or other electrical equipment due to shock hazard from water-based spray.

Fenvastar EcoCap should be mixed with water and applied with hand pressurized or power operated sprayers. Shake container of Fenvastar EcoCap before diluting. Clean spray equipment before use. For dilution, add approximately half the required water to spray tank and then add the appropriate amount of Fenvastar EcoCap. Agitate and slowly add the remaining water. Agitate spray thoroughly before using and also occasionally during use to ensure dispersion.

Apply as a course, wet spray to surfaces where these pests are normally found. Treat floors, baseboards, around doors and windows, in attics, crawl spaces, eaves, corners, closets, walls, utility pipes, storage areas, and all cracks and crevices. Treat underneath sinks, dishwashers, refrigerators, stoves, the underside of shelves, drawers, cabinets, areas behind pipes, and in all places where these insects shelter. Contact as many insects as possible with direct spray. Repeat applications as needed, but do not exceed more than one (1) application every seven (7) days.

Please refer to and follow the instructions on the Product label.