PT 565 XLO Product Label

PT 565 XLO Material Safety Data Sheet (MSDS)

565 Plus XLO Contact Insecticide Pest Control 20oz Can

Whitmire Micro-Gen's 565 Plus XLO Contact Insecticide Pest Control is the perfect insect control solution. The insecticide contains the botanical insecticide Pyrethrin, an organic compound with potent insecticidal properties.

Why Should You Use 565 Plus XLO Contact Insecticide Pest Control?

565 Plus XLO covers an extensive range of bugs and a 20 oz. aerosol can cover approximately 1500 square feet of space.

Directions for 565 Plus XLO Contact Insecticide Pest Control 20oz Can Use

565 Plus XLO can be used for direct contact kills or space treatments. The product can be used indoors or outdoors to treat areas infested by insects.

Where to Apply 565 Plus XLO Contact Insecticide Pest Control 20oz Can

Apply 565 Plus XLO in apartments, homes, campgrounds, hotels, storage areas, schools, transports, supermarkets, commercial buildings and industrial buildings.

Indoor Applications

For space treatments, first calculate the size of the space to be treated. Turn off air conditioners and close all windows and doors and spray the enclosed area by directing the insecticide mist upwards. Spray at the rate of 1 to 3 seconds per 1000 cu. ft. of enclosed space and keep the area closed for at least 15 minutes for maximum effectiveness. Before reoccupying, ventilate the treated area.

For direct contact applications, place the injector tip at the can nozzle and spray on cracks and crevices frequented by insects. Spray at rates depending on applications. Spray additional amounts if necessary or when the infestation seems heavy. Please consult the Material Safety Data Sheet for the specifics.

Outdoor Applications

For outdoor treatments, spray only at wind speeds below 6 miles per hour. Repeat if necessary. Spray directly into mud dauber and wasp nests by holding the container 18" away.

Advance Termite Bait Cartridge Product Label

Advance Termite Bait Cartridge Material Safety Data Sheet (MSDS)

Advance Termite Bait System Installation and Service Guide

Advance Termite Bait Cartridges

Whitmire Micro-Gen's Advance System is an in-ground monitoring system specifically designed for termites. The Termite Bait System consists of several components that work together to control termite infestations. The bait system includes a termite bait station (TBS), termite monitoring base (TMB), termite inspection cartridge (TIC), and a termite base cartridge (TBC).

Termite bait cartridges (TBCs) are put into place instead of TICs to start the baiting process. The TBC contains Puri-Cell tablets mixed with a powerful termiticide Diflubenzuron which consists 0.25% of the bait's weight.

Advance Termite Bait Cartridges are sold individually or in sets as refills to Advance Termite Bait System Kits.

Why Should You Use Advance Cartridges ?

The Advance Termite Bait System is highly effective in monitoring and controlling termite infestations. The product's active ingredient Diflubenzuron is contained in these cartridges. Advance Termite Bait Cartridges is the system's primary weapon against termites. Without these bait cartridges, termite control is impossible.

Directions for Advance Termite Bait Cartridges Use

Insert the termite monitoring base at the bottom of the bait station. Place the cartridge on top of the monitoring base and seal the station using the cap provided in the package. Install bait stations as recommended.

Where to use Advance Termite Bait Cartridges

Advance Termite Bait Systems are installed indoors on basement floors or outdoors around structures. Excavations are made for it is necessary for the bait stations to have access to soil. Surfaces covered in concrete and asphalt must be drilled of holes to fit the bait stations. Stations must be fully entrenched to maximize soil contact.

Advance Termite Bait System Installation and Service Guide

Advance Termite Inspection Cartridge Label

Advance Termite Inspection Cartridge MSDS

Advance Termite Inspection Cartridge-6 Units

Whitmire Micro-Gen's Advance Termite Bait System Pro Kit is an in-ground monitoring system specifically designed for termites. The Termite Bait System consists of several components that work together to control termite infestations. The bait system includes a termite bait station (TBS), termite monitoring base (TMB), termite inspection cartridge (TIC), and a termite bait cartridge (TBC).

A termite inspection cartridge (TIC) is placed on top of the TMB. The TIC contains the Puri-Cell tablets to monitor termite populations. Made from highly purified cellulose, termites accelerate consumption to reach the rich food source. Termites quickly take over the station's resources until the food source is fully consumed.

If the TIC shows the presence of termites, termite bait cartridges (TBCs) are put into place instead of a TIC to start the baiting process. The TBC contains Puri-Cell tablets mixed with a powerful termiticide Diflubenzuron which consists 0.25% of the bait's weight.

Advance Termite Inspection Cartridges are sold individually or in sets as refills to Advance Termite Bait System Kits.

Why Should You Use Advance Termite Bait System ?

The Advance Termite Bait System is highly effective in monitoring and controlling termite infestations. The product's active ingredient Diflubenzuron, significantly reduce termite populations.

Directions for Advance Termite Bait System Use

To monitor termite presence in premises, assemble the bait system by first inserting the termite monitoring base (TMB) at the bottom of the base station. Place the termite inspection cartridge (TIC) on top of the TMB and cover the station with the supplied Quick-Lock cap.

For baiting, stack the termite monitoring base and the termite bait cartridge with the TBC on top of the TMB. Cover the assembly using the cap provided in the package.

In both applications, soil excavations are done to accommodate the bait stations. This can be done by using drilling tools or other drilling equipment. Drilled holes should be deep and wide enough to fit the stations. Install bait stations 10 feet or 20 feet apart from each other.

Inspect stations 45 days and 90 days after installing and every 90 days thereafter.

Where to use Advance Termite Bait System

Advance Termite Bait Systems are installed indoors on basement floors or outdoors around structures. Excavations are made for it is necessary for the bait stations to have access to soil. Surfaces covered in concrete and asphalt must be drilled of holes to fit the bait stations. Stations must be fully entrenched to maximize soil contact.

Bifen IT Product Label

Bifen IT Material Safety Data Sheet (MSDS)

BIFEN I/T - 1 Pint

Bifen I/T (Insecticide/Termiticide) is one of the most potent insecticides in the market. With 7.9% Bifenthrin, the product is highly effective in controlling a wide variety of pest insects, including various species of subterranean termites. Bifen I/T is specially formulated to control termite and insect infestations around commercial, residential and industrial structures.

Why Should You Use BIFEN I/T ?

Bifen I/T contains high concentrations of Bifenthrin to control and prevent termite and insect infestations. In addition, the product leaves a long-lasting residual effect that last for months.

Directions for BIFEN I/T Use

Applying Bifen I/T requires the use of suitable application equipment and personal protective equipment. The product is extremely toxic. Please refer to the product label before using or handling the product. Please read the product label for information on treatments, dilutions and application methods. Depending on the target pest and the method of application, Bifen I/T should be applied using the correct methods as stated in the product label. The product can be used for broadcast treatments, perimeter treatments, crack and crevice applications, sub-slab injections and residual barrier treatments. For subterranean termite control, methods may be employed such as trenching, rodding, crack and crevice injection or absorption for effective control.

Bifen I/T can also be used to control Armyworms, Cutworms, Sod Webworms, Annual Bluegrass Weevils, Billbugs, Black Turfgrass Ataenius, Leafhoppers, Mealybugs, Ants, Centipedes, Chinch Bugs, Fleas , Imported Fire Ants, Millipedes, Mole Crickets, Ticks, Pillbugs, Sowbugs and European Crane Flies. Please read the product label for directions and mixing instructions.

Where to Apply BIFEN I/T

Use Bifen I/T to treat infested areas in and around residential, commercial, public and industrial buildings. The product is for use in lawns, parks, recreational areas and athletic fields.

Bora-Care Product Label

Bora-Care Material Safety Data Sheet (MSDS)

Mold-Care Product Label

BoraCare with Mold-Care

From the world leader in borate technology, Nisus Corporation introduces a revolutionary product that combines the function of an insecticide, termiticide and fungicide. Bora-Care with Mold Care not only prevents and controls wood boring insects, it also prevents mold, fungi and mildew that can destroy wood, concrete and other building materials. With a guaranteed residual effectivity of up to 12 years, Bora-Care with Mold Care is the ultimate residual protection for homes and other structures.

Why Should You Use BoraCare with Mold-Care?

Bora-Care with Mold-Care provides one of the longest residual protections against wood boring insects and fungi. Residues of the product remain active for up to 12 years!

Directions for Bora-Care with Mold-Care Use

Bora-Care and Mold-Care are concentrates that must be diluted with clean water before use. Mix one pint of Mold-Care per gallon of Bora-Care and dilute the concentrate in 5 gallons of water. Stir the solution until uniform. Dilutions must be mixed in a separate container first before adding the mixtures into sprayer tanks. Apply the product using the appropriate equipment and methods. Bora-Care is NOT a soil termiticide and therefore must not be applied as such.

Bora-Care may be used in treating cellulosic materials such as wood, plywood, oriented strand board (OSB), paper, cardboard and wood composites. It is recommended conduct pretreatments during construction where greater access to structural wood members is available.

Treat all wood members especially base plates and studs that surround moist areas such as bathrooms, kitchens, laundry rooms and plumbing. Treat trusses, joists, rafters and other overhead components.

Apply Bora-Care with Mold-Care to BARE exterior walls only. Paint and other finishes must first be removed prior to treatments. Do NOT apply when raining or snowing.

Bora-Care with Mold-Care may be used in dip treating logs and lumber at the rate of one gallon of Bora-Care solution per 400 board feet of wood.

Where to Use Bora-Care with Mold-Care

Bora-Care with Mold-Care is labeled for use in and around homes, apartment, garages, schools, hotels, public and private institutions, farm buildings, trailers, commercial and industrial buildings.

Bora-Care Product Label /

Bora-Care Material Safety Data Sheet (MSDS)

Bora-Care Termiticide

From the world leader in borate technology, Nisus Corporation introduces a revolutionary product that combines the function of an insecticide, termiticide and fungicide. Bora-Care penetrates deep into wood, eradicating existing colonies and eliminating wood as a food source. The product is ideal for use in preconstruction preventative and remedial treatments or as a wood preservative.

Why Should You Use Bora-Care?

Bora-Care provides one of the longest residual protections against wood boring insects and fungi. Residues of the product remain active for up to 12 years!

Directions for Bora-Care Use

Bora-Care is a concentrate that must be diluted with clean water before use. Mix Bora-Care with water following the recommended ratios found in the product label. Dyes may be added to diluted solutions for tracking purposes. The product may be applied by spraying, injecting or brushing.

Bora-Care may be used in treating cellulosic materials such as wood, plywood, oriented strand board (OSB), paper, cardboard and wood composites. It is recommended conduct pretreatments during construction where greater access to structural wood members is available. Bora-Care is NOT a soil termiticide and therefore must not be used or applied as such.

Treat all wood members especially the wood components that are close to foundations or soil. base plates and studs that surround moist areas such as bathrooms, kitchens, laundry rooms and plumbing. Treat trusses, joists, rafters and other overhead components.

Where to Apply Bora-Care

Bora-Care with Mold-Care is labeled for use in and around homes, apartment, garages, schools, hotels, public and private institutions, farm buildings, trailers, commercial and industrial buildings.

CB D-FOAM Product Label

CB D-FOAM Material Safety Data Sheet (MSDS)

CB D-Foam - 17 oz. can

Waterbury's CB line of residuals now includes a ready-to-use contact insecticide in a foam solution. With a high expansion rate, CB D-Foam fills voids rapidly to control insects in hard to reach areas. The product targets a broad range of pest insects including termites, ants, bees, beetles and cockroaches. CB D-Foam offers long lasting residual control that lasts for up to 8 weeks! CB D-Foam contains Deltamethrin, a synthetic pyrethroid insecticide widely used due to its effectiveness and its low toxicity to mammals.

Why Should You Use CB D-Foam ?

CB D-Foam is unrivaled in contact kill and residual control efficiency. Once applied the product continues to kill pests for 2 months, greatly reducing control costs.

Directions for CB D-Foam Use

Shake well before using. Hold container upright and direct the nozzle towards the treatment area. For crack and crevice treatments, remove the nozzle cap from the container and install the supplied actuator. Replace the protective cap. Aim the nozzle towards the treatment area, press the button and apply the product as directed in the product label.

CB D-Foam is suitable for surface applications, crack and crevice applications, spot treatments and wall void applications. To control subterranean termites in above-ground areas of structures, first locate galleries, voids and tunnels in wooden structural components using available location techniques. It is sometimes necessary to drill holes in order to access and inject foam into insect galleries. Apply the product to voids/areas where insects frequent, breed, and hide.

Where to Apply CB D-Foam

CB D-Foam is for use in and around: Homes, Apartments, Hospitals, Hotels, Food Handling Establishments, Restaurants, Food Processing Plants, Industrial Buildings, Storage Areas, Warehouses, and Transport Vehicles.

CB Air Devil HPX Product Label

CB Air Devil HPX Material Safety Data Sheet (MSDS)

CB Air Devil HPX - 14 oz.

CB Air Devil HPX is an instant contact kill aerosol that also eliminates large number of pests. After the CB Air Devil HPX aerosol is used the protection will last up to 3 months.

Advantages of CB Air Devil HPX

Residual action provides up to 3 months of insect control
Specially developed to clear out large numbers of target insects fast
Quick knockdown plus low environmental impact

CB AIR DEVIL HPX IS FOR USE IN:

Homes, Laboratories, Kennels, Aircraft (cargo area), Buses, Apartments, Offices and the non-food/feed areas of Restaurants, Dairies, Milk Storage Rooms, Supermarkets, Hospitals (non-occupied patient areas), Egg Processing Plants, Bakeries, Bottling Plants, Institutions, Hotels, Motels, Stables, Schools, Nursing Homes (non occupied patient areas), Stores, Warehouses, Nurseries, Food Manufacturing, Processing and Servicing Establishments; Trucks, Trailers, Vessels, Railcars; Commercial, Industrial and Storage Buildings .

CB AIR DEVIL HPX FOR RESIDUAL PEST CONTROL :

Homes, laboratories; NON-FOOD/NON-FEED AREAS restaurants, dairies, milk storage rooms, supermarkets, hospitals (nonoccupied patient areas), nursing homes (nonoccupied patient areas), egg processing plants, bakeries, bottling plants, institutions, hotels, motels, kennels, stables, schools, nurseries, stores, warehouses, food manufacturing, processing and servicing establishments; Transportation aircraft (cargo area), buses, trucks, trailers, vessels, railcars; Storage commercial, industrial, apartment, office and storage buildings.

CB AIR DEVIL HPX FOR CRACK AND CREVICE APPLICATION:

Cockroaches, Spiders, Crickets, Silverfish, Firebrats use injector tip, releasing approximately 1 second spray per spot. For serious infestations, spray spots approximately 12 inches apart; for light infestations, spray approximately 3 feet apart. Spray into hiding places such as cracks, crevices, openings around pipes and sinks, under refrigerators, behind baseboards, coffee makers, meter boxes, and manholes. Spray directly on insects in these locations where possible. Repeat as necessary.

CB AIR DEVIL HPX IN FOOD HANDLING ESTABLISHMENTS:

Places other than private residences in which food is held, processed, prepared or served.
Non-food Areas: This product may be used as a general spot or crack and crevice treatment in non-food areas. All areas where insects hide or through which insects may enter should be treated. Non-food areas are areas such as garbage rooms, lavatories, floor drains (to sewers), entries and vestibules, offices, locker rooms, machine rooms, boiler rooms, garages, mop closets and storage (after canning or bottling).

Food Areas: Do not use in food/feed areas of food/feed handling establishments, restaurants, or other areas where food/feed is commercially prepared or processed. Do not use in serving areas while food/feed is exposed or facility is in operation. Serving areas are areas where prepared foods are served such as dining rooms but excluding areas where food may be prepared or held. In the home, all food processing surfaces and utensils should be covered during treatment or thoroughly washed before use. Exposed food should be covered or removed.

CRAWLING INSECTS:Sowbugs, Pillbugs, Millipedes, and Centipedes apply around doors and windows and other places where these pests may be found or where they may enter premises. Spray baseboards, storage areas and other locations. Repeat as necessary. See outdoor use below. ANTS: Apply to any trails, around doors and windows and other places where ants may be found.

WOOD DESTROYING INSECTS: Treat wood suspected of harboring all species of Termites, Carpenter Ants and Carpenter Bees. The purpose of such application of Air Devil Residual is to kill workers or winged form which may be present in the treated channels at the time of treatment and to impact a temporary resistance at these places to attack which may aid in the prevention of immediate reinfestation. Such applications are not a substitute for mechanical alternation, soil treatment or foundation treatment but merely a supplement. Localized treatment of wood-infesting insects locate suspected infestation and/or insect tunnels and cavities. Inject 5 to 10 seconds of spray into insect tunnels, galleries and inaccessible closed voids. In infested sites, pilot holes should be drilled eight to ten inches apart to insure thorough insecticide gallery treatment. Make sure not to contact electrical wiring, plumbing, etc., when drilling. Use available application equipment. For Carpenter Bees, seal entrance openings with small pieces of stainless steel wool after application.

CB AIR DEVIL HPX FOR OUTDOORS:

For control of Ants, Bees, Centipedes, Cockroaches, Crickets, Firebrats, Millipedes, Silverfish, Sowbugs, Pillbugs, Spiders, Flies,and Wasps apply as a residual spray to surfaces of refuse dumps and similar areas where these pests are found.

Conquer Product Label

Conquer Material Safety Data Sheet (MSDS)

Conquer Liquid Insecticide - 1 Pint

Widely used by PMPs due to its effectiveness, Conquer Insecticide is a general-use insecticide that targets hundreds of pest insects and provides lasting residues to prevent future infestations. The product's active ingredient is Estenvalerqate, a synthetic pyrethroid insecticide that is highly toxic to numerous pest insects even in low concentrations. Be a conqueror! Conquer pest infestations using Conquer Insecticide.

Why Should You Use Conquer Liquid Insecticide?

Conquer Insecticide covers a broad spectrum of controllable insects. The product is very economical, effective and long lasting.

Directions for Conquer Liquid Insecticide Use

Conquer Residual Insecticide concentrate may be diluted in water or oil. For general applications, mix one or two fluid ounces of Conquer EC with one gallon of water or oil. For light infestations, apply solutions containing 0.027% of the active ingredient (made by mixing one fluid ounce of Conquer CS with one gallon of water). Increase the active ingredient concentration when treating heavy infestations. Mix 2 fl. oz. of Conquer EC to a gallon of water to produce a solution containing 0.05% Estenvalergate. Apply solutions using appropriate spray equipment. Please read the product label for insect-specific control instructions.

Where to Apply Conquer Liquid Insecticide

Conquer Insecticide is for use in and around homes, apartments, schools, warehouses, office buildings, hotels, kennels, lawns, commercial buildings and industrial buildings.

Please refer to and follow the instructions on the product label.

Crack & Crevice II with Propoxur Product Label

Crack & Crevice II with Propoxur Material Safety Data Sheet (MSDS)

Crack & Crevice II Propoxur - 14 oz.

Crack & Crevice II with Propoxur is an insecticide that provides quick knockdown and long-lasting residual protection against crawling insect infestation with its superior formulation. It is ideal for direct contact kill, spot treatments and crack and crevice treatments in both residential and commercial locations, which include food handling areas. Crack & Crevice is easy to use, and can be applied upside-down, and right-side-up without leaking. Alternating with Crack & Crevice I will maximize the effect of crawling pest control.

For Use in and around: Apartments, Homes, Hospitals, Hotels, Food Storage Areas, Meat Packing Plants, Food Processing Plants, Motels, Nursing Homes, Restaurants and Other Food Handling Establishments, Supermarkets, Transportation Equipment (Buses, Boats, Ships, Trains and Planes), Warehouses and Other Commercial and Industrial Buildings.

Crack & Crevice Treatment:

Use Crack & Crevice II Propoxur with the supplied actuator and injection tubes. Inject Crack & Crevice II Propoxur into cracks and crevices or void spaces where insects may be harboring, living, and breeding. Place injector tip into cracks, crevices, holes, and other small openings where insects may enter. Spray into inaccessible areas behind and beneath sinks, stoves, cabinets, refrigerators, damp areas, and in and around waste containers.

Spot Treatment:

Use with the supplied actuator and injection tubes. Direct nozzle approximately 12 inches from surface to be treated. Apply directly on insects in these locations when possible.

Indoor Treatment:

Crawling Insects - Cockroaches, Dermestids, Scorpions, Spiders, Earwigs, Crickets, Sowbugs, Millipedes, Centipedes: Apply as a spot treatment or crack & crevice treatment. Spray into hiding places such as cracks and crevices, moist areas, openings around pipes and sinks, under refrigerators, behind baseboards, coffee makers, meter boxes, and manholes. Spray directly on insects in these locations where possible. Repeat as necessary

BOOKLICE & SILVERFISH: Spray cracks and crevices in baseboards, doorframes, bookcases, and storage areas. Spray directly on insects in these locations where possible. Repeat as necessary.

ANTS: Apply as a spot treatment or crack & crevice treatment. Spray into nests, trails, around doors, windows, into structural cracks and crevices, and wherever ants enter house. Spray directly on insects in these locations where possible. Repeat as necessary. Do not treat entire area of floor or floor covering.

Localized treatment of wood destroying insects:

CARPENTER ANTS and CARPENTER BEES: Locate source of infestation. Inject 5-10 seconds of spray into insect tunnels and cavities.

CARPENTER BEES: Seal entrance openings with small pieces of stainless steel wool after spray application.

TERMITES: Locate source of infestation. Apply to voids and channels in damaged wooden members of a structure or to cracks, spaces or bearing joints between wooden members of a structure. Inject 5-10 seconds spray into insect tunnels and cavities. This application is not a substitute for mechanical alteration, soil treatment, or foundation treatment but is merely a supplemental treatment. This product is intended to kill workers or winged reproductive forms which may be present in the treated areas.

Temp Vent Installation Manual

TV Automatic Foundation Vents

Crawl Space Vent (Temp-Vent) - One Piece Unit

Help protect your foundation with Crawl Space Temp-Vent. The foundation is critical to the integrity of the home.That's why foundation ventilation is critical. Unventilated foundations are subject to built-up moisture that can eventually lead to costly damage.

Crawl Space Vent Temp Vent foundation vent systems help protect this critical area of the home. What's more, ventilation can help control conditions that lead to mold, mildew, fungi, damp rot, and unhealthy air.

Why Should You Use?

If there's one thing termites are attracted to, it's warm, moist, dead-air environments such as those found under houses in crawl spaces or unfinished basements. Temp-Vent products have been especially designed for the pest control industry.

Temp-Vent foundation vents help to provide ventilation that can reduce moisture in these areas, which helps control termites.

A crawl space dehumidifier with no drain or power needed!

Directions for Use

Whenever possible, vents should be placed on all sides of the foundation. This will create an intake/exhaust system that delivers a steady flow of air. One vent should be installed for each 8 to 10 feet of foundation wall.

Most building codes require 1 square foot of open ventilation area for every 150 square feet of crawl space. Temp Vent Automatic Foundation Vents have 50 inches of net free area per vent. Therefore, you should install one vent for every 50 square feet of crawl space.

For crawl spaces with polyethylene installed, on 80-90% of the ground, the ventilation requirement changes to 1 square foot of ventilation for every 500 square feet of crawl space with a minimum of 4 vents installed to provide cross ventilation. For crawl spaces with polyethylene, install at least one vent for every 500 square feet of crawl space.

The non-powered, Automatic Foundation Vent will open and close automatically using a heat/cold sensitive coil. The louvers open completely at approximately 72 F and completely close at approximately 38 F. Unlike manual vents that can waste energy when no one remembers to open or close them, these vents self-adjust all year long.

To Specify

1. Multiply the square feet of the crawl space by the height in feet. This gives the number of cubic feet in the crawl space.
2. Multiply the cubic feet in the crawl space by the number of air changes per hour desired (4-6 is the recommendation). This gives the total number of cubic feet of air that has to be moved per hour to produce the desired number of air changes.
3. Divide this number by either 7,200 or 11,160 depending on which model is being used to obtain the number of power vents needed.
4. Install vents to provide air intake on one side of the foundation with the power vents on the other side to create a system of intake and exhaust.

Example: 1500 square foot crawl space x 3 feet high = 4500

4500 cubic feet x 6 = 27,000 / 7,200 = 3.74

Install 4 power vents with intake vents on the opposite side.

Temp Vent Installation Manual

TV Automatic Foundation Vents

Crawl Space Vent (Temp-Vent) - Two Piece Unit

Help protect your foundation with Crawl Space Temp-Vent. The foundation is critical to the integrity of the home.That's why foundation ventilation is critical. Unventilated foundations are subject to built-up moisture that can eventually lead to costly damage.

Crawl Space Vent Temp Vent foundation vent systems help protect this critical area of the home. What's more, ventilation can help control conditions that lead to mold, mildew, fungi, damp rot, and unhealthy air.

Why Should You Use?

If there's one thing termites are attracted to, it's warm, moist, dead-air environments such as those found under houses in crawl spaces or unfinished basements. Temp-Vent products have been especially designed for the pest control industry.

Temp-Vent foundation vents help to provide ventilation that can reduce moisture in these areas, which helps control termites.

A crawl space dehumidifier with no drain or power needed!

Directions for Use

Whenever possible, vents should be placed on all sides of the foundation. This will create an intake/exhaust system that delivers a steady flow of air. One vent should be installed for each 8 to 10 feet of foundation wall.

Most building codes require 1 square foot of open ventilation area for every 150 square feet of crawl space. Temp Vent Automatic Foundation Vents have 50 inches of net free area per vent. Therefore, you should install one vent for every 50 square feet of crawl space.

For crawl spaces with polyethylene installed, on 80-90% of the ground, the ventilation requirement changes to 1 square foot of ventilation for every 500 square feet of crawl space with a minimum of 4 vents installed to provide cross ventilation. For crawl spaces with polyethylene, install at least one vent for every 500 square feet of crawl space.

The non-powered, Automatic Foundation Vent will open and close automatically using a heat/cold sensitive coil. The louvers open completely at approximately 72 F and completely close at approximately 38 F. Unlike manual vents that can waste energy when no one remembers to open or close them, these vents self-adjust all year long.

To Specify

1. Multiply the square feet of the crawl space by the height in feet. This gives the number of cubic feet in the crawl space.
2. Multiply the cubic feet in the crawl space by the number of air changes per hour desired (4-6 is the recommendation). This gives the total number of cubic feet of air that has to be moved per hour to produce the desired number of air changes.
3. Divide this number by either 7,200 or 11,160 depending on which model is being used to obtain the number of power vents needed.
4. Install vents to provide air intake on one side of the foundation with the power vents on the other side to create a system of intake and exhaust.

Example: 1500 square foot crawl space x 3 feet high = 4500

4500 cubic feet x 6 = 27,000 / 7,200 = 3.74

Install 4 power vents with intake vents on the opposite side.

CyhaloCap CS Product Label

CyhaloCap CS Material Safety Data Sheet (MSDS)

CyhaloCap CS Insecticide - 1 pint

High-performance microencapsulation technology for residual control. CyhaloCap CS (Capsule Suspension) Insecticide provides broad-spectrum, residual control of structural pests for PMPs who prefer lambda-cyhalothrin.

For Use in and Around: Indoor and outdoor

Product Description

CyhaloCap CS is a dilutable spray containing BASF's proprietary SmartCap microencapsulation technology and featuring lambda-cyhalothrin, a proven active ingredient with broad spectrum activity and effective residual control of structural pests.

Cynoff WP Product Label

Cynoff WP Material Safety Data Sheet (MSDS)

Cynoff WP - 1 lb.

The power of Cypermethrin is now available in powder form with FMC's Cynoff WP. Excellent for broadcast, perimeter, and crack and crevice treatments, Cynoff delivers superior residual and contact kill to common pests. Cynoff WP has an active ingredient content of 40%, nearly doubling that of Cynoff EC. WP is a cost-effective insecticide that can yield up to 48 gallons of solution at the cost less than its competitors.

Why Should You Use CYNOFF WP?

Cynoff cost less but performs better than other insecticide brands.

Directions for CYNOFF WP Use

Cynoff WP must be diluted in water for spray or brushing applications. The product comes with a plastic scoop with 0.33 oz. capacity. Use a full scoop of Cynoff WP per gallon of water to yield a solution having 0.1% of the active ingredient. Doubling the amount of the concentrate yields solutions with 0.2% active ingredient content. Depending on the target pest/s, solutions must have 0.1% to 0.2% active ingredient content.

Apply the product as a coarse, low pressure spray to infested areas and potential insect-harboring sites such as basements, attics, behind and under appliances, storage areas, cabinets, shelves, baseboards, under sinks and along plumbing. Pay particular attention to cracks, crevices and voids.

Using hand or power sprayers, apply the product by brush or residual spray to building surfaces, porches, window screens, patios, lawns and other grass areas to control outdoor insects.

For barrier treatments, create a band measuring 6 to 10 feet around structures to protect them from infestations. Apply the product as a coarse spray, at the rate of 1 gallon per 400 square feet. Also treat building foundations and other potential entry points to a height of 3 to 5 feet.

Where to Apply CYNOFF WP

Cynoff WP is for residual pest control in and on buildings and structures including: industrial buildings, houses, apartment buildings, laboratories, buses, greenhouses, and the nonfood/feed areas of stores, warehouses, vessels, railcars, trucks, trailers, aircraft (Do not use in aircraft cabins), schools, nursing homes, hospitals, restaurants, hotels, and food manufacturing, processing, and servicing establishments.

Cyper TC Product Label

Cyper TC Material Safety Data Sheet

Cyper TC (Demon TC)

Cyper TC is exactly the same as Demon TC, except cheaper. Cyper TC is to be used in a pre- and post- treatment for subterrranean termites and beetles. Cyper TC is almost odorless and protects up to 90 days.

Description:

Subterranean Termite Control: apply 0.25%-0.50% solution to establish subsurface termite control barriers as specified on product labeling.

Avoid contamination of public and private water supplies by following thse precautions:

1. Use anti-backflow equipment or procedures to prevent spillage of pesticide back into water supplies.
2. Do not treat soil beneath structures that contain wells or cisterns.
3. Care must be taken to avoid runoff. Do not treat soil that is water-saturated or frozen.
4. Do not treat while precipitation is occurring.
5. Care should be taken that the treatment solution is not introduced into the gravel and/or pipe drainage system which may be location on the exterior of the foundation in close proximity to the footing of the structure.

Mixing Directions

Mix the termiticide in the following manner:

1. Fill tank 1/4 to 1/3 full with water.
2. Start pump to begin by-pass agitation and place end of treating tool in tank to allow circulation through hose.
3. Add appropriate amount of CYPER TC Insecticide.
4. Add remaining amount of water.
5. Let pump run and allow recirculation through the hose for 2 to 3 minutes.

Horizontal Barriers:

Horizontal barriers may be established in areas intended for covering such as floors, porches, and other critical areas. Application shall be made by a low-pressure spray (less than 50 p.s.i at the nozzle). Apply the emulsion at the rate of 1 gallon per 10 square feet to fill dirt. If fill is washed gravel or other coarse material, apply the emulsion at the rate of 1-1/2 gallons per 10 square feet. This is not necessary if foundation walls have been installed around the treated soil.

Vertical Barriers:

Vertical barriers may be established around the base of foundations, plumbing, back-filled soil against foundation walls, and other critical areas; applications may be made by trenching and rodding into the trench. Apply the emulsion at the rate of 4 gallons per 10 linear feet per foot of depth. When treating foundations deeper than 4 feet, apply the termiticide as the backfill is being replaced or if the construction contractor fails to notify the applicator to permit this, treat the foundation to a minimum depth of 4 feet after the backfill has been installed. the applicator must trench and rod into the trench or trench along the foundation walls and around pillars and other foundation elements, at the rate prescribed from grade to minimum depth of 4 feet. When the top of the footing is exposed, the applicator must treat the soil adjacent to the footing to a depth not to exceed the bottom of the footing. However, in no case should a structure be treated below the footing. A trench need not to be wider than 6 inches from the base of a shallow trench to the top of the footings. Low-pressure spray (less than 50 p.s.i. at the nozzle) may be used to treat soil which will be replaced in the trench. Mix the emulsion with the soil as it is being replaced in the trench.

Hollow Masonry Units of the Foundation: Drill and treat voids in multiple masonry elements of the structure extending from the structure to the soil in order to create a continuous treatment barrier in the area to be treated. Apply at the rate of 2 gallons of emulsion per 10 linear feet of footing using a nozzle pressure of less than 25 p.s.i. When using this treatment, access holes must be drilled below the sill plate and should be as close to possible to the footing as is practical. Treatment of voids in block or rubble foundation walls must be closely examined; applicators must inspect area of possible runoff as a precaution against application leakage in the treated areas.

Crawl Spaces: Apply at the rate of 4 gallons of emulsion per 10 linear feet per foot of depth from grade to the top of the footing. Application may be made by trenching and rodding into the trench or trenching. If the footing is exposed at or above grade, application should be made with special care to avoid washout around footing. Treatment should include both sides of foundation and around all piers and pipes.

Rod holes should be spaced to provide a continuous chemical barrier.

trench need not b wider than 6 inches nor below the foundation. The emulsion should be mixed with the soil as it is being replaced in the trench.

Demand CS Product Label

Demand CS Material Safety Data Sheet (MSDS)

Demand CS Brochure

Demand CS - 8 oz

Demand CS is a highly active insecticide featuring Syngenta's iCAP microencapsulation technology. By encapsulating Lambda-Cyhalothrin, Demand CS produces residuals that are waterproof, photo-stable, and long lasting. Controlled release of the active ingredient greatly increases residual life at the same time reduce the residue's odors and stains. Versatile and economical, Demand mixes well with other registered pesticides and can be diluted and applied in very low concentrations.

Why Should You Use DEMAND CS ?

Demand CS uses microencapsulation techniques to extend the life end efficiency of residuals.

Directions for DEMAND CS Use

Use Demand CS for surface, crack and crevice or spot treatments. The product comes as a concentrate that must be diluted with water and applied using application equipment such as hand/power sprayers.

Shake well before using. Mix Demand CS with water to produce solutions. Finished solutions can be converted to foam using foaming agents to treat structural voids and nests. Solutions may have 0.015% to 0.06% active ingredient content, depending on the target pest/s and the severity of their infestations. Other registered insecticides may be added to yield solutions with multiple capabilities. Please read the product label for dilution tables and application rates.

Apply as a coarse, low pressure spray to indoor or outdoor sites and surfaces. Spray to areas where insects are seen congregating, hiding, breeding and other potential harborage areas. Pay special attention to cracks, crevices and voids in structures. Treat these areas with liquid or foam using appropriate equipment and methods.

Demand CS can also be used to create perimeter barriers, treat infestations in ornamental plants and turf and for subsurface treatments to control mole crickets and ants. Refer to the product label for specific instructions on how to control target pests.

Where to Apply DEMAND CS

Demand CS is for use in, on and around residential, commercial, institutional, public, agricultural and industrial buildings/structures.

DRAGNET SFR Product Label

DRAGNET SFR Material Safety Data Sheet (MSDS)

Dragnet SFR - 1 Qt

From the makers of CB Residuals and Talstar insecticides comes another revolutionary termiticide with enhanced residual and contact kill capabilities. FMC's Dragnet SFR Termiticide/Insecticide does not break down easily in soil and retains its potency for extended periods of time. Specially formulated for subterranean termites, Dragnet also targets a wide range of indoor and outdoor pest insects. Versatile and very economical, one quart yields 100 gallons of solution that can be used in a variety of applications.

Why Should You Use Dragnet SFR ?

Dragnet SFR is superior in both residual control and contact kills to more than 50 insects in its label.

Directions for Dragnet SFR Use

Dragnet SFR is a concentrate that must be diluted in water to create emulsions. Active ingredient content may vary from 0.5% to 2.0% depending on treatments or target pests. Use this product for pre-construction treatments of structures or to treat existing termite infestations in and around buildings and structures. Knowledge of treatment techniques such as rodding, trenching, sub-slab injections, void injections and crack and crevice treatments is essential in order to have effective control of termites. Use this product for residual pest control in and on buildings and their immediate surroundings. Dragnet SFR may be used in broadcast applications, spot applications, crack and crevice injections or as a paint-on treatment. Consult the product label for more details.

Where to Apply Dragnet SFR

Dragnet SFR is for use in and around residential, commercial, public and industrial buildings. This includes homes, apartments, laboratories, greenhouses, non-food areas of food handling store areas, warehouses, schools, nursing homes, hospitals, transports and food processing, manufacturing and servicing establishments.

Firstline GT Plus Product Label

Firstline GT Plus Material Safety Data Sheet

FirstLine GT Plus Termite Bait (6)

Firstline GT Plus Termite Bait Stations are replacement for the Firstline GT Plus Termite System. After the System is in place and need replacements because you have run out or it has been damaged, you do not have to worry; we sell the bait replacements separately. The Firstline GT Plus Termite Bait Stations come in a pack of six and can be used in both residential or commercial industries. A maximum of 30 FirstLine GT Plus Termite Bait Stations can be installed (In the ground at any one time).

HOW TO USE:

FirstLine GT Plus Termite Bait Station is ready to use and filled with a treated cellulosic matrix containing 100 ppm sulfluramid, a slow acting insecticide. The use of this bait suppresses or controls termite infestations. The termite activity depends on the species involved, weather, moisture, and the time of year. Termites may require 1 to 4 months or more for control. Permitted areas of use include commercial, industrial, institutional and residential buildings and structures such as, houses, apartment buildings, laboratories, stores, warehouses, schools, nursing homes, hospitals, restaurants, hotels, churches, food manufacturing, processing and service establishments and their immediate surroundings.

For Structures With an Active Infestation:

For use around residential, daycare, and pre-school structures. A maximum of 30 FirstLine GT Plus Termite Bait Stations can be installed (In the ground at any one time). For use around commercial, industrial, and institutional structures (except daycare or pre-school structures), use as many FirstLine GT Plus Termite Bait Stations as needed. Use one FirstLine GT Plus Termite Bait Station in an area of heavy termite activity. Bury the FirstLine GT Plus Termite Bait Station up to its cap in soil, wood, or mulch or completely bury the FirstLine GT Plus Termite Bait Station to help prevent tampering.

Firstline Termite Bait System Label

Material Safety Data Sheet

Firstline Termite Bait System - 1 Station

Firstline Termite Bait System has 24 Monitoring Stations. It works great in humid state that have more termites, and great for residential and commercial industries.

Commercial, industrial, institutional and residential buildings and structures, and their immediate surroundings. Permitted areas of use include but are not limited to industrial buildings, houses, apartment buildings, laboratories, and the non-food/feed areas of stores, warehouses, schools, nursing homes, hospitals, restaurants, hotels, churches, food manufacturing, processing and service establishment.

Firstline Termite Bait System Label

Material Safety Data Sheet

Firstline Termite Bait System

Firstline Termite Bait System has 24 Monitoring Stations. It works great in humid state that have more termites, and great for residential and commercial industries.

Commercial, industrial, institutional and residential buildings and structures, and their immediate surroundings. Permitted areas of use include but are not limited to industrial buildings, houses, apartment buildings, laboratories, and the non-food/feed areas of stores, warehouses, schools, nursing homes, hospitals, restaurants, hotels, churches, food manufacturing, processing and service establishment.

FirstLine Termite Defense System Replacement Wood - 1 Case

FirstLine Termite Defense System Replacement Wood has no pesticide. Its just a piece of slotted wood that is used in the FirstLine Termite Monitoring system (the device usually used before the bait to determine if there are termites or not). It is recommended to replace the wood if it becomes to moist or damage to kepp its effectiveness.

Firstline Termite Defense System monitoring wood replacement. When the monitoring wood becomes too moist it is recommended to replace it.

I Maxx Pro 2F Product Label

I Maxx Pro 2F Material Safety Data Sheet (MSDS)

I Maxx Pro 2F Insecticide / Termiticide

I Maxx Pro 2F is the exact same product as Premise 2 and contains the same amount of active ingredient: Imidacloprid 21.4%. This powerful non-repellent termiticide concentrate creates an effective long-term barrier against termites around residential and commercial structures. Each bottles yields 50 - 100 gallons of insecticide for pest or termite control. While I Maxx Pro 2F is often used against termites, it is also labeled for carpenter ants and other wood-destroying insects.

Masterline Bifenthrin 7.9 Product Label

Masterline Bifenthrin 7.9 Material Safety Data Sheet (MSDS)

Masterline Bifenthrin 7.9 Brochure

Masterline Bifenthrin 7.9

Univar's Masterline Bifenthrin Insecticide/Termiticide offers superior control of indoor and outdoor pests such as termites, cockroaches, ants and many more. Its active ingredient, Bifenthrin, is popular for its broad spectrum of control and excellent residual properties. With Masterline's powerful residual formulation, expect effective and lasting control the toughest pest infestations in and around your homes.

Why Should You Use?

Masterline Bifenthrin 7.9 targets several indoor and outdoor pests. This highly versatile product is the solution to all your indoor and outdoor pest problems.

Directions for Use

Masterline Bifenthrin 7.9 is an emulsifiable concentrate intended for water dilutions. Finished solutions can be used for general surface treatments, crack and crevice treatments or spot applications. Finished emulsions may be converted to foam using suitable foaming agents. Insect growth regulators and other pesticides may be tank mixed together with the product unless explicitly prohibited by the product label. Masterline is excellent for use in treating termite infestations. Technicians must be familiar with termite control techniques such as trenching, rodding, sub-slab injection and coarse spray application for effective use of the product. Apply finished emulsions using appropriate equipment such as hand held or powered sprayers, brushes, foam applicators and other similar application equipment. Carefully read the product label for application directions, dilution rates and application rates.

Where to Apply

Masterline controls pests indoors and outdoors on residential, commercial, institutional, public, commercial and industrial buildings. Areas of use also include lawns, ornamental plants, interiorscapes, recreational areas and athletic fields.

Phantom Pressurized Insecticide Product Label

Phantom Pressurized Insecticide Material Safety Data Sheet (MSDS)

Phantom Pressurized Insecticide - 17.5 oz.

Offering the same trusted performance of Phantom Insecticide, Phantom Pressurized Aerosol Spray the active ingredient more efficiently than other residual aerosols. Labeled for indoor general pest control, Phantom kills several pests including pyrethroid-resistant strains of bedbugs and roaches. Phantom works by preventing cells inside an insect's body from generating energy leading to paralysis and death. Phantom's formulation dries in crystals, increasing the life of the active ingredient while leaving no visual residues.

Why Should You Use?

Phantom is the only liquid non-repellent insecticide labeled for general pest control indoors.

Directions for Use

Phantom Pressurized Insecticide is for crack and crevice and/or spot treatments only. Apply the product as directed in the product label. Shake well before use. Press down the spray tip to release the product and apply at the rate of 2 sec/linear feet. Move the can along the length of the treatment area. For closed voids, apply at the rate of 3 sec/cubic feet. For spot treatments, hold the can 12 inches away from the surface to be treated and spray at the maximum rate of 11 sec/2 square feet. Do not exceed 2 square feet per spot. Apply as a spot, void or crack and crevice treatment to insect harboring sites where insects, hide, live, feed and breed. Also treat areas where insects travel, enter or exit structures. Contact insects as much as possible. Treat spaces under and behind cabinets, refrigerators, stoves, sinks, expansion joints, drains, lockers, pipes, in attics, crawlspaces, and vents, around doors, windows, eaves, nests and damaged wood components of structures. Please read the product label for more information.

Where to Apply

Phantom Pressurized Insecticide is labeled for use indoors and outdoors of homes, apartments, meat, poultry, fish, and egg processing and packaging plants, entries and vestibules, offices, food and non-food areas of food handling establishments other than private residences, machine rooms, boiler rooms, garages, storage areas, warehouses and other commercial, residential, institutional and industrial establishments.

Phantom Termiticide/Insecticide Product Label

Phantom Termiticide/Insecticide Material Safety Data Sheet (MSDS)

Phantom Termiticide/Insecticide NY Brochure

Phantom Insecticide Termite Control - 21 oz.

Phantom is a powerful insecticide for control of termites, ants and other pests indoors and outdoors. Primarily used for termite control, Phantom offers an alternative way to control these subterranean pests. Unlike repellent pesticides, Phantom is a non-repellent contact insecticide that is undetectable to termites and other pests. This prevents termites from avoiding barriers or finding gaps in treatment barriers. Termites are killed as they move through Phantom barriers, eliminating infestations for good.

Why Should You Use?

Phantom kills termites instead of repelling them.
Kills termites by ingestion and contact.
Controls populations much faster than bait systems.
Responsible, low-dose treatment, with virtually no odor.

Directions for Use

Phantom is a liquid concentrate designed to provide treatment zones in and around structures. Primarily intended for termite control, Phantom can also be used to control pests such as ants, cockroaches, bed bugs and other pests. Follow mixing instructions and apply the product as directed in the product label. The technician must be familiar with termite control practices and regulations for effective use of this product. Solutions may be converted to foam by mixing compatible foaming agents for foam applications. Use Phantom for pre- and post-construction treatment of structures using suitable termite contol techniques and application equipment. Apply as a low-pressure spot or crack and crevice spray for residual pest control inside and outside structures.

Where to Apply

Phantom Termiticide & Insecticide is for use in and around houses, apartments or other residential structures, meat, poultry & egg processing and packaging plants, food/feed handling and non-food/feed handling areas of food handling establishments, commercial, institutional, warehousing and industrial establishments.

Crawlspaces and Moisture Control

TV Automatic Foundation Vents

Powered Temp-Vent - Foundation Vent Model: TVHPS6

For homes that require a higher rate of airflow, the Power Temp Vent is the ideal choice. Powered vents are quick, convenient and economical when it comes to controlling moisture and odor problems. Air is suctioned out of the crawl space and replaced with fresh outside air. Negative pressure helps prevent dampness and odor from rising into living areas of the home.

Example: 1500 sq/ft crawl space x 3 feet high = 4500 cu/ft x 6 = 27,400 / 7,200 = 3.74. Thus, install 4 power vents with intake vents on the opposite side.

Totally enclosed motor feature a 3-prong plug and is 0.017 HP rated for continuous operation. UL recognized and CSA certified.
Power vents should be placed on one side of the house with non-powered vents that act as intake vents on the other sides.
A Thermostat should be used to turn the fan off in freezing weather to protect pipes under the home and save energy. A Humidistat should also be connected to the fan to control the operation of the vent. A damp weather shut-off humidistat will turn the unit off when it's raining outside.

A Duct System is available that attaches to a powered foundation vent to provide targeted ventilation in hard to reach areas.

Crawlspaces and Moisture Control

TV Automatic Foundation Vents

Powered Temp-Vent Humidistats - Model C

A humidistat can connect to the Powered Temp-Vent to turn the fan on and off automatically. unit off when the crawl space temperature drops below the setting. Turns unit on when humidity in crawl space rises above a pre set limit, usually set at 50% humidity.

Crawlspaces and Moisture Control

TV Automatic Foundation Vents

Powered Temp-Vent Thermostat

Set at approximately 50 F, the thermostat turns the Powered Temp-Vent unit off when the crawl space temperature drops below the setting. Normally, when the temperature outside is at 40 degrees the temperature in the crawl space is approximately 50 degrees. The thermostat helps protect pipes and save energy by turning the vent off when the temperature is close to freezing.

Premise 75 Product Label

Premise 75 Material Safety Data Sheet (MSDS)

Premise 75 WSP

Premise 75 WSP can be used indoor as outdoors with a long lasting, effective termite control. Premise 75 WSP works well for Subterranean Termites, Drywood and Dampwood termites. Premise 75 WSP not only repels termites like the other WP but also kills on contact. Since the Premise 75 WSP is a contact kill it will kill any other pest that come in contact with the infested pest.

Directions for use of Premise 75 WSP

Structures that contain wells or cisterns within the foundation of the structure can only be treated using the treated back fill method described in the treatment around wells and cisterns section of this label. Consult state and local specifications for recommended distances of wells from treated areas, or if such regulations do not exist, refer to Federal Housing Administration Specifications (H.U.D) for guidance.
For Mixing directions refer to the label

Control- General

Treatment standards for subterranean termite control may vary due to regulations, treatment procedures, soil types, construction practices and other factors. The purpose of chemical soil treatment for termite control is to establish a continuous chemical soil treatment for termite control is to establish a continuous chemical treated zone (horizontal and/ or vertical as needed) between the wood and other cellulose material in the structure and the termite colonies in the soil. Follow all federal, state, and local regulations and treatment standards for protection of a structure from termites. In some instances where an aerial or above ground colony is established, supplemental treatments to control the termites, landscape modifications, and. or structural repairs may be needed to deprive termites of a moisture source.

Pre- Construction Treatment

Do not apply at a lower dosage and/ or concentrations than specified on this label for application prior to installation of the finished grade. Prior to each application, applicators must notify the general contractor, construction superintendent, or similar responsible party, of the intended termiticide application and intended sites of application and instruct the responsible person to notify construction workers and other individuals to leave the area to be treated during application and until the termiticide is absorbed into the soil.

Post Construction Treatment

Concrete Slab on ground: to apply a treatment under the slab, including attached porches, carports, entrance platforms, garages, and similar slab structures, it may be necessary to drill the slab or exterior foundations. Drill holes should be spaced in a manner that will allow for application of a continuous chemical treated zone. Treat all existing cracks and cold, construction or expansion joints. Also, treat around bath traps, plumbing and utility services which penetrate the slab. Apply 4 gallons of solution (see application volume) per 10 linear feet per foot of depth to provide a uniform treated zone. Plug and fill all drilled holes in commonly occupied areas with a suitable sealant. Plugs must be of non- cellulose material or covered by an impervious, non- cellulose material.
An application should be made by trenching or trenching and ridding around the outside of the foundation wall. Apply 4 gallons of solution ( See Application Volume) per 10 linear feet per foot of depth to provide a uniform treated zone. When trenching, the trench along the outside foundation should be about 6 inches wide and 6 inches deep. Use a love pressure spray to treat soil as it is being placed in the trench. Ridding can be done from the bottom of a shallow trench. When ridding, rod holes should be spaced in a manner that will allow for a continuous chemical treated zone. Not to exceed 12 inches, to be deposited along the treated area. Rod hole depth should be should not extend below the footing.

Bath Traps: Exposed soil or soil covered with tar or a similar type sealant beneath and around plumbing and/ or drain pipe entry areas should be treated with 3 gallons of solution per square foot. An access door or inspection vent should be cut and installed if not already present. After inspection and removal of any wood or cellulose debris, the soul can be treated by ridding or drenching the soil.

Control Of Wood Infesting Pests:

For control of above ground termites and carpenter ants is localized areas, apply a 0.05 to .01% solution or sufficient volume of Premise 75 Insecticide foam to void and galleries in damaged wood, and in spaces between wooden structural members and between the sill plate and foundation where wood is vulnerable. Applications may be made to inaccessible areas by drilling, and then injecting the suspension or foam with a suitable directional injector into the damaged wood or wall voids. Termite carton nests in building voids may be injected with a 0.05 To0.1 suspension or foam. Multiple injection points to varying depths may be necessary. It is desirable to physically remove carton nest materials from building voids when such nests are found. Application to attics, crawl spaces, unfinished basements, or man made voids may be made with a coarse fan spray of 0.05 to 0.1% solution or foam to control exposed worker and winged reproductive forms of termites or carpenter ants. This type of application is intended to be a supplemental treatment for control of above ground subterranean termites and carpenter ants. (... continued in the label...)

Premise 2 Termiticide Product Label

Premise 2 Termiticide Material Safety Data Sheet (MSDS)

Premise 2 Termiticide Foaming Instruction

Premise 2 Termiticide - 240 ml.

Premise is a non-repellent termiticide from Bayer. Unlike repellent barriers, Premise leaves treatment zones that are undetectable to termites. What makes Premise better than repellent termiticides is that it kills termites instead of driving them away. As termites burrow or forage for cellulose, they are exposed to the active ingredient. Social insects such as termites exhibit trophallaxis or shared feeding which makes them vulnerable to Premise. The active ingredient is spread throughout the colony as workers contact other termites. In addition, the contaminated food source is consumed by the colony members and the poison spreads like wildfire.

Why Should You Use?

Premise prevents infestations by killing the Wood Destroying Organism. Premise 2 Termiticide, a product manufactured by bayer, is long lasting and works great when treating localized areas of known subterranean activity, it can be used to treat drywood and dampwood termites as well.

Directions for Use

Prepare a diluted spray solution by mixing Premise with water. Follow the mixing table found in the product label. Fill applicator tanks 1/4 or ⅓ full of water and place the end of the treating tool inside the tank and begin bypass agitation. Add the appropriate amount of Premise followed by the remaining volume of water. Allow recirculation for 2 to 3 minutes. Always follow the application rates and methods in the product label. Apply using proper application equipment. Use this product for pre-construction treatments, post-construction treatments or for general pest control. Technicians should be familiar with termite control practices and regulations in order to maximize the product's efficiency.

The recommended application volume for is 4 gallons per 10 linear feet. If the soil cannot accept the recommended application volume, use 2 gallons of solution per 10 linear feet. Active ingredient concentration must be raised from 0.05% to 0.10% to deliver an equivalent amount of Premise to soil.

For foam applications, mix appropriate amount of Premise in water and add the recommended amount of foaming agent. See the product label for the mixing table. For effective use of this product, carefully read the product label for detailed instructions in mixing and application.

Where to Apply

Premise is for use in pre- and post-construction stages of residential, commercial and industrial buildings and structures.

Premise Foam Product Label

Premise Foam Material Safety Data Sheet

Premise Foam Brochure

Premise Foam Termiticide - 18 oz.

Premise is now available as a premixed foam solution for termite treatments. Premise Foam is available in 18-ounce, easy-to-use cans that eliminates the hassles of mixing and the need for bulky application equipment. Each container can produce approximately 5 gallons of foam. Like Premise 2, this product is formulated as a non-repellent for thorough and effective control.

Why Should You Use?

Premise Foam makes termite control easier with its convenient packaging.

Directions for Use

The product is intended as a supplemental tool for termite control and should not be used as a stand-alone treatment or as a substitute to mechanical alterations, structural or soil treatments. Place injector tip into cracks and crevices, voids and other small openings where insects are known to hide. Drill small holes to receive the injector tip in order to properly dispense the product in inaccessible areas of infestation. Allow the product to expand fully inside voids. To avoid runoffs, keep the injector tip in position for 5 seconds after releasing the trigger. Read the product label for application directions.

Where to Apply

Premise Foam is labeled for use in pre- and post-construction stages of residential, commercial and industrial buildings and structures.

Do NOT contaminate streams, rivers, or waterways with this product or used containers.

Keep out of reach of children.

Dispose of can by putting in the garbage or leaving it at an appropriate metal recycling collection point.

Will irritate the eyes and skin. Avoid contact with eyes and skin. If product on skin immediately wash area with soap and water. If product in eyes wash it out immediately with water. Wash hands after use. When using the product, wear cotton overalls buttoned to the neck and wrist and washable hat, elbow-length PVC gloves and face shield or goggles. After each day use, wash gloves, face-shield or goggles and contaminated clothing.

Premise Granules Product Label

Premise Granules Material Safety Data Sheet (MSDS)

Premise Granules Termiticide -3.6 lbs.

Premise Granular unlike other termites products have a domino affect on the termites. Premise is not a repellent but kills the termite that has been exposed over a period of time, if the exposed termite comes in contact either by feed or grooming it will kill them as well. Use Premise Granular in the soil around the house surroundings. Premise attacks more then one termite at a time giving it a domino affect that wipes out the whole colony in the end.

Apply to:

Bare soil, landscaped areas, turf grass and mulch areas
Areas surrounding structures that are subject to termite attack
Non-structural wood-to-soil contact situations
Quick and easy -- start killing termites instantly.
Can be used before full structural treatment
No mixing or set-up time
No water needed to apply
No bulky, heavy equipment needed

Active ingredient: imidacloprid, is tried and true More effective than repellent insecticides which rely on barriers that pests can simply walk through Instead, termites walk or tunnel through treated areas.

Premise Granules is Backed by Bayer,TM which means it backed by Bayer science and service, no extra charge:

Training, at your location or ours BayerES Mobile University, the 5th Week Training Series, Coast to Coast seminars and convenient web programs.Technical experts who troubleshoot problems
Marketing tools you can customize for your business

Pro Citra DL Product Label

Pro Citra DL Material Safety Data Sheet (MSDS)

Pro Citra DL Botanical Insectcide (Orange Oil) - 17.5 oz.

From Whitmire Micro-Gen's line of all natural insecticides, Pro Citra contact kill aerosol offers the same performance as synthetic insecticides without the toxicity. This natural, broad label product targets several common household insects such as ants, roaches and termites. Its active ingredient is d-Limonene, a botanical insecticide with very low toxicity to humans. This makes the product ideal for use in sensitive accounts such as schools, nursing homes and hospitals.

Why Should You Use?

Pro Citra does not contain synthetic active ingredients that are usually toxic.

ProCitra-DL is a botanical-based insecticide ideal for Crack and Crevice and spot treatment in both food and nonfood handling areas. It controls a wide variety of pests including ants, cockroaches, fleas and spiders and may be used in sensitive accounts such as schools, nursing homes, food processing plants, hospitals and government buildings.

Directions for Use

Pro Citra-DL is intended for crack and crevice and/or spot treatments only in food and non-food handling areas. Use this product with the supplied actuator and injection tubes. Place injector tip into cracks, crevices and voids where insects typically hide. Move injector tip along small openings at the rate of 3 linear feet per second for light infestations and one linear foot per second for heavy infestations. Treat close voids at the rate of one to five seconds per three cubic feet. For spot treatments, hold the container upright and direct the nozzle 12 inches from the surfaces. Treat areas under sinks, around pipes, refrigerators, stoves, washing machines, areas around cabinets, baseboards, floor drains, utility boxes and other infested sites. Contact insects as much as possible. Reapply as necessary. Read the product label for more information.

Where to Apply

Pro Citra Botanical Insecticide is for indoor use in apartments, homes, hotels, hospitals, nursing homes, schools, day care centers, food storage areas, restaurants, food processing plants, supermarkets, utilities, warehouses, modes of transport (buses, trains, trucks, ships), and other commercial, institutional and industrial buildings.

Product Label

Material Safety Data Sheet

Tengard SFR One - 1 Quart

Tengard SFR One's active ingredient has the ability to kill over 75 different types of pest. The permethrin in Tengard SFR One has a long lasting and increases effective. Tengard SFR One can be used indoors and outdoors, when used outdoors it dispersed in the soil and establish a barrier between the structure and the termites in the soil. Tengard SFR One is a pesticide that kill pest but also as a prevention.

Mix the termiticide use dilution in the following manner:

1. Fill tank 1/4 to 1/3 full.
2. Start pump to begin by-pass agitation and place end of treating tool in tank to allow circulation through hose.
3. Add appropriate amount of Tengard SFR. (See Rate/Volume Conversion Chart)
4. Add remaining amount of water.

Application Volume: To provide maximum control and protection against termite infestation apply the specified volume of the finished water emulsion and active ingredient as set forth in the directions for use section of this label. If soil will not accept the labeled application volume, the volume may be reduced provided there is a corresponding increase in concentration so that the amount of active ingredient applied to the soil remains the same.

NOTE: Large reductions of application volume reduce the ability to obtain a continuous barrier. Variance is allowed when volume and concentration are consistent with label directed rates and a continuous barrier can still be achieved.

Termidor SC Product Label

Termidor SC Material Safety Data Sheet

Termidor SC Brochure

Termidor SC - 20 oz.

Termidor SC is a water-based suspension concentrate termiticide that is made with 9.1% Fipronil. It is one of the most trusted products on the market for pre and post construction termite applications to both houses and business buildings. Moreover, Termidor is actually listed for a variety of perimeter pests and wood infesting pests. Applied at 0.8 fluid ounces per gallon of water for a 0.06% dilution rate, a 20 ounce bottle of Termidor can yield 24 gallons of emulsion.

Use Termidor for different types of control:

Termite control: Protect your family and your home from termite infestations by using Termidor for ground treatment or for surface treatment. For ground treatment, use Termidor to trench around your home. Dilute Termidor SC with water and pour into 6 inch deep holes every ten linear feet around the perimeter of your house or business to protect the structure from termite infestations. Also use Termidor SC to spot treat inside your home in the wall void or for pre-construction termite control treatment. (Refer to the product label for detailed instructions on how to apply Termidor or on how to use Termidor for ground treatment)

Ant Control: Termidor SC can be used as a surface treatment outdoors to control ant infestations. Mix Termidor in appropriate dilution rates (refer to product label for all the correct dilution rates) and use a pump sprayer to spray around perimeter of the structure. You can use Termidor as a barrier treatment around the structure to protect your home from such species of ants as Carpenter ants, Crazy ants, or Argentine ants.

BASF, one of the most renowned manufacturing companies for pest control products, have produced Termidor to protect your homes from current termite infestations as well as prevention for reoccurring termite infestations. It is the #1 termite defense products on the market right now. It is a termiticide that can be applied in several different ways making this product one of the most flexible application options available for termite control. Even if there are no existing termite infestations in your home right now, be aware that Termidor is powerful enough to ensure prevention of future infestations for at least 10 years.

Termidor SC proves its efficacy because the manufacturers of this product have tested and proven that its advanced liquid technology is something that is the most effective on termites right now. Its undetectable, non-repellent characteristic allows termites to go about their everyday routines without smelling, tasting, seeing, or avoiding the product. Instead, as they go through their routines, termites come in contact with the product and are able to ingest and share it, while being completely oblivious to the consequences of doing so.

BASF has labeled the effects of Termidor SC as the Termidor "Transfer Effect" which acts like the common "domino effect" but for termites. When a termite ingests or comes in contact with the product, the termite can then become a medium or a carrier of the chemical and they are able to then transfer it to the other termites of the colony without being aware of their doings. The termites that contract the poison from the initial carriers then become "secondary carriers" of Termidor, all the while, behaving as they normally do during their daily routines. Eventually, Termidor is able to contaminate all termites of the colony and ultimately eliminate them. Because of the slow-action release, Termidor allow just enough time for each termite to contract the poison and allow them to transfer it to other termites. This "transfer effect" is a unique type of effect for termite control that is like none other and proves to be devastating to the termite colony that has infested your home.

Termite baits can actually take several years for the termite colonies to find them. Meanwhile, termites continue to reproduce, the colony continues to grow, and your largest investment is vigorously attacked and slowly becomes ruined. Termidor, however, begins to show results immediately and wipes out entire colonies that surround the structure.

Termidor's versatility in how it eliminates termites proves its efficiency. Not only is Termidor an ingestion kill poison but it a contact kill as well. Since termites are unable to detect the chemicals while they are working and moving, termites continuously and unknowingly come in contact with Termidor.

Not only is Termidor good for termite control but Termidor SC can actually be used for ant control as well. It is one of the most powerful control products for carpenter ants and even other species of ants like Argentine ants and crazy ants. Termidor can be applied to the exterior of foundation walls and by doing so, Termidor creates a protective barrier from ant species that may try to enter your home.

Keep in mind that Termidor is labeled for outdoor use only. It can only be used "indoors" when you are applying Termidor as a spot treatment in the wall void or under the flooring. It cannot be used indoors for ant control or for other pest control and cannot be directly applied to your children or pets.

Please refer to and follow the instuctions on the Termidor SC product label.

Product Label

Marterial Safety Data Sheet (MSDS)

Timbor Insecticide and Fungicide - 1.5 lbs.

Timbor Professional is used for the control of carpenter ants, drywood termites, wood decay fungi and wood boring beetles. It is a water-soluble borate powder that can be applied as a dust, spray, foam or mist onto wood and cellulosic materials or inside wall voids, cracks and crevices. Depending on the moisture content of the materials, the liquid solution will penetrate to create a protective envelope, acting as a preservative, insecticide and fungicide. The dust provides an additional layer of protection by killing carpenter ants, drywood alates and adult wood boring beetles that enter the structure and pass through it.

FOR USE IN:

TIM-BOR Professional is recommended for wood and cellulose material in accordance with the specific treatment methods described herein. TIM-BOR Professional is effective for all interior and exterior wood (and wood-foam composite structural components) that will be protected from excessive rain and not in direct contact with the soil. Types of wood include, but are not limited to, all types of lumber, logs and plywood. Do not apply TIM-BOR Professional to wood or cellulose material that has been painted, varnished or sealed. For best results, apply TIM-BOR Professional to bare wood. Use soap and water to clean application equipment.

Tim-bor Professional is an efficient, fast and economical way to treat a structure for target pests. It can be used as a wood preservative, fungicide and insecticide on its own or in conjunction with other treatments as a supplement. Because of its application flexibility as a dust or liquid, PMPs can address many treatment niches with this single product - Tim-bor Professional can be applied as a dust, spray, foam or mist onto wood and cellulose materials or inside wall voids, cracks and crevices.

The active ingredient in Tim-bor Professional is Disodium Octaborate Tetrahydrate (DOT), a natural mineral salt with a low mammalian toxicity and no known resistance.

Tim-bor Professional has strong brand awareness and a long history of effectiveness in the market place. Because it is well known in the industry, it is often requested by name, delivering a strong confidence factor for PMPs.

How It Works

Tim-bor Professional's active ingredient is Disodium Octaborate Tetrahydrate (DOT), a natural borate mineral salt and micronutrient. It is manufactured for use in the form of a water-soluble borate powder. Once it's applied in a liquid form by foaming, misting or spraying onto wood or other cellulosic materials, the borate active ingredient creates a protective envelope and remains for years of protection. Often Tim-bor Professional is dusted into places like wall voids where pests like to hide as an additional protection. When the dust gets on the insects, they clean themselves and consume the boron during the cleaning process.

Trebor Triple Seal Plug

Trebor Triple Seal Plug are one of the most effectively used tools out in the pest control industry today. Most people are unaware of the fact that insects like to live inside walls and cervices. Insects also like to lay their eggs in dark and damp areas such as inside the walls. The best way to solve this problem is to use a fog or foam method. Using a drill, drill a hole inside on the wall and using the termiticides. Afterwards plugging the Trebor Triple Seal Plug will prevent and insect from trying to come out.

Trebor Triple Seal Plug are used after a hole is drilled into the cement for chemical termiticides.

Product Label

Marterial Safety Data Sheet (MSDS)

Timbor Insecticide and Fungicide - 25 lbs.

Timbor Professional is used for the control of carpenter ants, drywood termites, wood decay fungi and wood boring beetles. It is a water-soluble borate powder that can be applied as a dust, spray, foam or mist onto wood and cellulosic materials or inside wall voids, cracks and crevices. Depending on the moisture content of the materials, the liquid solution will penetrate to create a protective envelope, acting as a preservative, insecticide and fungicide. The dust provides an additional layer of protection by killing carpenter ants, drywood alates and adult wood boring beetles that enter the structure and pass through it.

FOR USE IN:

TIM-BOR Professional is recommended for wood and cellulose material in accordance with the specific treatment methods described herein. TIM-BOR Professional is effective for all interior and exterior wood (and wood-foam composite structural components) that will be protected from excessive rain and not in direct contact with the soil. Types of wood include, but are not limited to, all types of lumber, logs and plywood. Do not apply TIM-BOR Professional to wood or cellulose material that has been painted, varnished or sealed. For best results, apply TIM-BOR Professional to bare wood. Use soap and water to clean application equipment.

Tim-bor Professional is an efficient, fast and economical way to treat a structure for target pests. It can be used as a wood preservative, fungicide and insecticide on its own or in conjunction with other treatments as a supplement. Because of its application flexibility as a dust or liquid, PMPs can address many treatment niches with this single product - Tim-bor Professional can be applied as a dust, spray, foam or mist onto wood and cellulose materials or inside wall voids, cracks and crevices.

The active ingredient in Tim-bor Professional is Disodium Octaborate Tetrahydrate (DOT), a natural mineral salt with a low mammalian toxicity and no known resistance.

Tim-bor Professional has strong brand awareness and a long history of effectiveness in the market place. Because it is well known in the industry, it is often requested by name, delivering a strong confidence factor for PMPs.

How It Works

Tim-bor Professional's active ingredient is Disodium Octaborate Tetrahydrate (DOT), a natural borate mineral salt and micronutrient. It is manufactured for use in the form of a water-soluble borate powder. Once it's applied in a liquid form by foaming, misting or spraying onto wood or other cellulosic materials, the borate active ingredient creates a protective envelope and remains for years of protection. Often Tim-bor Professional is dusted into places like wall voids where pests like to hide as an additional protection. When the dust gets on the insects, they clean themselves and consume the boron during the cleaning process.

FirstLine Termite Defense System Replacement Wood - 5 pcs

FirstLine Termite Defense System Replacement Wood has no pesticide. Its just a piece of slotted wood that is used in the FirstLine Termite Monitoring system (the device usually used before the bait to determine if there are termites or not). It is recommended to replace the wood if it becomes to moist or damage to kepp its effectiveness.

Firstline Termite Defense System monitoring wood replacement. When the monitoring wood becomes too moist it is recommended to replace it.

Demon WP Product Label

Demon WP Material Safety Data Sheet (MSDS)

DEMON WP Insecticide - 1 Envelope

Syngenta's Demon WP is an odorless, water-soluble insecticide that delivers quick knockdown and lasting residual control of over 30 pests. The product contains 40% Cypermethrin, one of the most reliable pyrethroids to control indoor and outdoor pest infestations. Demon WP is available in convenient 1-lb jars with scoops and in envelopes which greatly reduces the efforts of mixing. One pound of the product makes up to 50 gallons of finished solution.

Why Should You Use DEMON WP?

Demon WP is a broad label insecticide providing fast kill and long-term residual control at a lesser cost.

Directions for DEMON WP Use

Demon WP is in the form of soluble powder that is intended for water dilutions. Following the dilution rates found in the product label, add measured amounts of Demon WP to water to produce the desired amount of solution. Compatible pesticides may be mixed together with the product unless prohibited by the product label. Use the finished solutions for surface treatments, crack and crevice treatments or spot applications. Apply solutions using handheld or powered sprayers, crack and crevice injectors or paint brushes.

Permitted areas of use in nonfood/nonfeed areas include, but are not limited to: aircraft (cargo and non-cabin areas only), apartment buildings, boiler rooms, buses, closets, correctional facilities, decks, entries, factories, fencing, floor drains (that lead to sewers), food granaries, food grain mills, food manufacturing, processing and serving establishments; furniture, garages, garbage rooms, greenhouses (non-commercial), hospitals (non-patient areas), hotels and motels, houses, industrial buildings, laboratories, livestock/poultry housing, landscape vegetation, locker rooms, machine rooms, mausoleums, mobile homes, mop closets, mulch, nursing homes, offices, patios, pet kennels,porches, railcars, restaurants, storage rooms, schools, sewers (dry), stores, trailers, trees, trucks, utility passages, vessels, vestibules, warehouses, wineries, and yards.

Repeat treatments as necessary, but not more than once every 7 days.

Where to Apply DEMON WP

For use by commercial applicators in, on and around buildings and structures for the control of listed pests, including on lawns, ornamental trees and shrubs around residential, institutional, public, commercial, agricultural and industrial buildings; and parks, recreational areas and athletic fields.

Demon WP may be used as a general surface, crack and crevice and/or spot treatment in the non-food areas of food handling establishments. Examples of non-food areas include garbage rooms, lavatories, floor drains (to sewers), entries and vestibules, offices, locker rooms, machine rooms, boiler rooms, garages, mop closets, and storage (after canning or bottling).

Do not use Demon WP in food areas of food handling establishments, restaurants or other areas where food is commercially prepared, processed or served. Food areas include areas for receiving, storage, packing (canning, bottling, wrapping, boxing), preparing, edible waste storage and enclosed processing systems (mills, dairies, edible oils, syrups). Serving areas (when food is exposed and facility is in operation) also would be considered a food area.

Advance Termite Bait Station Replacement Cap/Lid

Whitmire Micro-Gen's Advance Termite Bait System Pro Kit is an in-ground monitoring system specifically designed for termites. The Termite Bait System consists of several components that work together to control termite infestations. The bait system includes a termite bait station (TBS), termite monitoring base (TMB), termite inspection cartridge (TIC), and a termite bait cartridge (TBC).

The termite bait station (TBC) houses the bait system components. The TBC has a Quick-Lock Cap that protects the exposed portion of the station. The bait station can only be accessed by using a tool called a 'Spider' which can unlock the tamper-proof cap covering the station.

Station caps are often damaged from impacts due to their location on the ground. Fortunately, replacement lids are available to keep the Advance Termite Bait Stations fully functional.

Why Should You Use Advance Termite Bait Station?

Advance Termite Bait Station components should be secured to prevent tampering. Quick-Lock Caps and its replacements blend readily with the surrounding environment. Made of tough plastic, replacement station lids are strong enough to withstand impacts.

Directions for Advance Termite Bait Station Use

In monitoring and baiting applications, assemble the bait system by first inserting the termite monitoring base (TMB) at the bottom of the each base station. Place the termite inspection cartridge (TIC) or the termite bait cartridge (TBC) on top of the TMB. Cover the station with the supplied Quick-Lock Cap and install station as directed.

Place the Spider Access Tool on top of the replacement Quick-Lock Cap to open or close the station. The Spider is designed to hold the cap and only release it once the cap is reinstalled.

Where to use Advance Termite Bait Station

Advance Termite Bait Systems are installed indoors on basement floors or outdoors around structures. Excavations are made for it is necessary for the bait stations to have access to soil. Surfaces covered in concrete and asphalt must be drilled of holes to fit the bait stations. Stations must be fully entrenched to maximize soil contact.

Dominion 2L Material Safety Data Sheet

Dominion 2L Termiticide / Insecticide

Dominion 2L Termiticide Concentrate does not repel pests, but instead uses a starvation method. Once the termites comes into contact with Dominion 2L, they will automatically stop feeding and die. Do not use Dominion 2L with a termite bait because it will not work; however, you can also use it with an non repellent termite bait system such as Termidor. We recommend that when purchasing this product, you also purchase the Chapin 1 gallon sprayer. The average home will need approximately 100 gallon yield which is 4 gallons per 10 linear ft.. Termites and Dominion 2L is undetectable to insects and termites, so they would not be able to navigate around the treated area. When Dominion 2L is applied around the perimeter of your home, you have created an invisible barrier around your home to protect your home from termites. Dominion 2L chemically binds to the soil so it would not get washed away, keeping your house protected.

Directions for Use

Use Dominion 2L in pre-construction and post-construction treatments. For effective control, applicators must have the knowledge to perform treatment techniques such as rodding, trenching, crack and crevice injections or sub-slab injections. Typical control situations require 0.05% to 0.10% dilutions depending on the severity of infestations. Mix Dominion 2L with water following the recommended dilution rates found in the product label. Dilutions must be applied using proper application equipment such as hand or power sprayers. Apply the product as directed.

Termite Control with Dominion 2L Termiticide

Dominion 2L can be used in and around homes and buildings for termite control and prevention as well as applied directly to the infestation. Dominion 2L is applied at very low rate, usually 0.05% dilution is used for typical control situation, and 0.1% dilution is used for severe or persistent infestation. When 0.05% dilution is applied, one 27.5 oz bottle will yield 100 gallons of emulsion for treatment of 250 linear feet, wheras 0.1% dilution will yield 50 gallons of emulsion for treatment of 125 linear feet.

Dominion 2L is non-repellent termiticide--termites will not detect Dominion 2L and will crawl over the area where Dominion 2L is applied. Once the termites come in contact with Dominion 2L, the delay action kill of Dominion 2L will allow termites enough time to return to their colony and spread among themselves, eventually killing the entire colony.

How to Get Rid of Subterranean Termites with Dominion 2L

When treating for subterranean termites, trench around the foundation of the home / building structure 6 inches deep. Then, mix Dominion 2L Termiticide Concentrate with water according to the table provided inside the Product Label

1. Fill Tank to 1/3 full.
2. If using large sprayer, start pump to begin bypass agitation and place end of treating tool in tank to allow circulation through hose.
3. Add appropriate amount of DOMINION 2L TERMITICIDE / INSECTICIDE. Add remaining amount of water. Let pump run and allow recirculation through the hose for 2 to 3 minutes.

After mixing Dominion 2L Termiticide / Insecticide with water, apply 4 gallons of the emulsion every 10 linear feet. However, where soil conditions do not accept application of 4 gallons per 10 linear feet, treat the area twice with 2 gallons of the solution per 10 feet.

For subterranean termite control, submit to all federal, state and local regulations and treatment standards for termite protection.

Turfgrass Insect Pest Control with Dominion 2L Termiticide / Insecticide

DOMINION 2L TERMITICIDE / INSECTICIDE can be also used to control insect pests on turfgrass in home lawns, business and office complexes, shopping complexes, multi-family residential compleses, golf courses, airports, cemeteries, parks, playgorunds, athletic fields, and sod farms

For effective control of turfgrass insects, apply Dominion 2L before or during the egg laying period. Once Dominion 2L is applied, the residual action of the product will provide control over the turfgrass insects through the egg hatching periods. The optimum control will be achieved when the applications are made prior to egg hatch, followed by sufficient irrigation or rainfall to penetrate the active ingredient vertically in the soil profile. Do not exceed a total of 1.6 pints per acre per year.

Ornamental Pest Control with Dominion 2L

Dominion 2L can be used on ornamentals in commercial and residential landscapes and interior plantsacpe. Dominion 2L is a systemic product, meaning it will be taken up into the plant system from root uptake. Treat the area where the growing portion of the target plant can absorb the active ingredient. For better effectiveness, using nitrogen containing fertilizer, where applicable, along with Dominion 2L, may enhance the uptake of the active ingredient.

Phantom Termiticide/Insecticide Product Label

Phantom Termiticide/Insecticide Material Safety Data Sheet (MSDS)

Phantom Termiticide/Insecticide NY Brochure

Phantom Insecticide Termite Control - 75 oz.

Phantom is a powerful insecticide for control of termites, ants and other pests indoors and outdoors. Primarily used for termite control, Phantom offers an alternative way to control these subterranean pests. Unlike repellent pesticides, Phantom is a non-repellent contact insecticide that is undetectable to termites and other pests. This prevents termites from avoiding barriers or finding gaps in treatment barriers. Termites are killed as they move through Phantom barriers, eliminating infestations for good.

Why Should You Use?

Phantom kills termites instead of repelling them.
Kills termites by ingestion and contact.
Controls populations much faster than bait systems.
Responsible, low-dose treatment, with virtually no odor.

Directions for Use

Phantom is a liquid concentrate designed to provide treatment zones in and around structures. Primarily intended for termite control, Phantom can also be used to control pests such as ants, cockroaches, bed bugs and other pests. Follow mixing instructions and apply the product as directed in the product label. The technician must be familiar with termite control practices and regulations for effective use of this product. Solutions may be converted to foam by mixing compatible foaming agents for foam applications. Use Phantom for pre- and post-construction treatment of structures using suitable termite contol techniques and application equipment. Apply as a low-pressure spot or crack and crevice spray for residual pest control inside and outside structures.

Where to Apply

Phantom Termiticide & Insecticide is for use in and around houses, apartments or other residential structures, meat, poultry & egg processing and packaging plants, food/feed handling and non-food/feed handling areas of food handling establishments, commercial, institutional, warehousing and industrial establishments.

Termidor Foam Product Label

Termidor Foam Material Safety Data Sheet (MSDS)

Termidor Foam

The same powerful Termidor SC product is now available in the form of a foaming product. Termidor Foam is a product that utilizes the same active ingredient as the concentrate product, Termidor SC. It is a Ready-To-Use formula that is conveniently made to be effective against termites in areas like the wall void. It expands at a fast rate to fill in spaces like the wall void, termite galleries, and etc. Like the liquid concentrate, Termidor Foam is also highly effective against ants.

Advantages of Termidor Foam

Termidor FOAM is a new product that has been released by the same manufacturer as Termidor SC. It delivers the same power as the concentrate and utilizes the same active ingredient but is now more convenient to use! Termidor FOAM is an RTU product (ready-to-use product), which means that there is no mixing involved with preparing to use this product. Because it is an expanding foam product, it is great for spot treatments. It can be used in and around residential and commercial structures. It is good for structural and non-structural elements that are very prone to insect infestation like areas in the wall void, harborage sites, termite galleries, fences, utility poles, bridges, under the slab, landscape timbers, and nests where insects are frequently found. Termidor FOAM ultimately gives you the same control that you have already recognized and relied on from other Termidor products. Remember that Termidor FOAM should be applied to and used in target areas according to the product label instructions. Also, keep in mind that in order to access some of these target sites, drilling holes into or around the site may be required.

Termidor FOAM termiticide/insecticide is labeled for the same target pests as Termidor SC and is effective on termites as well as ants and other target pests that are listed on the product label. It fulfills the localized interior component of a PerimeterPLUS Exterior Perimeter/Localized Interior (EP/LI) treatment. It is a key component that is part of your treatment program to effectively get rid of termites and ants around your home.

Why Use Termidor FOAM?

- Termidor FOAM has the same great efficacy rate that you expect from other Termidor products.
- Works on ants as well as termites and other labeled pests.
- RTU Formula ?Ready-to-Use formula for convenience.
- It has an expansion rate of 30:1 and contains 5 gallons per can
- Termidor FOAM is a dry foam product that will distribute the active ingredient through cracks and crevices, even in the wall void
- Includes a convenient hose applicator to make application easy in tight areas