PT 565 XLO Product Label

PT 565 XLO Material Safety Data Sheet (MSDS)

565 Plus XLO Contact Insecticide Pest Control 20oz Can

Whitmire Micro-Gen's 565 Plus XLO Contact Insecticide Pest Control is the perfect insect control solution. The insecticide contains the botanical insecticide Pyrethrin, an organic compound with potent insecticidal properties.

Why Should You Use 565 Plus XLO Contact Insecticide Pest Control?

565 Plus XLO covers an extensive range of bugs and a 20 oz. aerosol can cover approximately 1500 square feet of space.

Directions for 565 Plus XLO Contact Insecticide Pest Control 20oz Can Use

565 Plus XLO can be used for direct contact kills or space treatments. The product can be used indoors or outdoors to treat areas infested by insects.

Where to Apply 565 Plus XLO Contact Insecticide Pest Control 20oz Can

Apply 565 Plus XLO in apartments, homes, campgrounds, hotels, storage areas, schools, transports, supermarkets, commercial buildings and industrial buildings.

Indoor Applications

For space treatments, first calculate the size of the space to be treated. Turn off air conditioners and close all windows and doors and spray the enclosed area by directing the insecticide mist upwards. Spray at the rate of 1 to 3 seconds per 1000 cu. ft. of enclosed space and keep the area closed for at least 15 minutes for maximum effectiveness. Before reoccupying, ventilate the treated area.

For direct contact applications, place the injector tip at the can nozzle and spray on cracks and crevices frequented by insects. Spray at rates depending on applications. Spray additional amounts if necessary or when the infestation seems heavy. Please consult the Material Safety Data Sheet for the specifics.

Outdoor Applications

For outdoor treatments, spray only at wind speeds below 6 miles per hour. Repeat if necessary. Spray directly into mud dauber and wasp nests by holding the container 18" away.

Alpine Dust Product Label

Alpine Dust Material Safety Data Sheet (MSDS)

How to Applying Dust Insecticide

Alpine Dust Insecticide - 3 lbs

Alpine Dust Insecticide is a direct contact insecticide in powder form. Like other Alpine products, the dust insecticide contains the non-repellent insecticide Dinotefuran. Alpine Dust Insecticide is tested and proven to control ants, cockroaches, bed bugs, beetles, fleas, moths, spiders, flies, wasps, millipedes and centipedes.

Why Should You Use Alpine Dust Insecticide?

Alpine Dust Insecticide provides a quick knockdown to a wide range of controllable pests. A 3 lb bag of the product covers approximately 3000 square feet.

Directions for Alpine Dust Insecticide Use

Product can be applied by hand or by the use of dusters and other similar equipment to ensure uniform applications. Spread the product evenly on to infested areas following the recommended application rates found in the product label. Apply 0.15 to 0.30 oz. of the product per square yard of surface area.

Please read the product label for application instructions and the recommended application rates. Pestmall offers Centrobulb Dusters and Bellow Dusters needed to apply Alpine Dust Insecticides.

Do not apply the product to surfaces where food is processed such as kitchen tables and sinks.

Do not treat pets or pet beddings with the product. Replace beddings after treating the area.

Please read the product label for application instructions and the recommended application rates. Pestmall offers Centrobulb Dusters and Bellow Dusters needed to apply Alpine Dust Insecticides.

Where to Apply Alpine Dust Insecticide

Alpine Dust Insecticide is for use in and around residential, commercial and industrial buildings. Apply thoroughly and evenly to infested areas, cracks and crevices, nests, voids, corners, under sinks and shelves, storage areas and other places where insects congregate, nest and hide.

For perimeter applications, sprinkle the product around insect entry holes such as structural cracks and crevices, window sills, patios, porches and other areas where insects have access to the building.

Alpine Pressurized Insecticide Product Label

Alpine Pressurized Insecticide Material Safety Data Sheet (MSDS)

Alpine Pressurized Insecticide Spray - 20 oz

Developed by Whitmire-Micro Gen Laboratories, the Alpine line of pest control products contain Dinotefuran. The Alpine Insecticide Spray is unusually effective for it contains high concentrations of the potent insecticide. In atomized form, the pesticide provides a quick killing action against pests. Alpine Pressurized insecticide spray is a must-have for homes for quick and effective control of common pest insects.

Why Should You Use?

Alpine Insecticide Spray is safe to use in and around residential spaces and has been granted by the EPA a Reduced Risk status.

Directions for Use

Shake well the Alpine Insecticide aerosol can before applications. Alpine Insecticide Spray can be used for direct contact kills, crack and crevice treatments, spot treatments and space treatments. The product is ideal for use indoors or outdoors to treat infested sites, nests and areas harboring insects. Hold the product upright and direct the nozzle 12 inches away from insects/surfaces to be treated. For direct contact applications, direct the nozzle towards insects and away from persons. When treating surfaces, Treat infFor crack and crevice treatments, use the supplied actuator to apply the product inside to voids, cracks, crevices holes and other insect-harboring sites. Please read the product label for application instructions and safety precautions. Use the product as directed in the product label. Do NOT apply the product to food-handling surfaces.

Where to Apply

Alpine Pressurized Insecticide spray is for use in and around apartments, campgrounds, homes, hospitals, hotels, nursing homes, resorts, schools, warehouses, commercial buildings and industrial buildings.

Bifen IT Product Label

Bifen IT Material Safety Data Sheet (MSDS)

BIFEN I/T - 1 Pint

Bifen I/T (Insecticide/Termiticide) is one of the most potent insecticides in the market. With 7.9% Bifenthrin, the product is highly effective in controlling a wide variety of pest insects, including various species of subterranean termites. Bifen I/T is specially formulated to control termite and insect infestations around commercial, residential and industrial structures.

Why Should You Use BIFEN I/T ?

Bifen I/T contains high concentrations of Bifenthrin to control and prevent termite and insect infestations. In addition, the product leaves a long-lasting residual effect that last for months.

Directions for BIFEN I/T Use

Applying Bifen I/T requires the use of suitable application equipment and personal protective equipment. The product is extremely toxic. Please refer to the product label before using or handling the product. Please read the product label for information on treatments, dilutions and application methods. Depending on the target pest and the method of application, Bifen I/T should be applied using the correct methods as stated in the product label. The product can be used for broadcast treatments, perimeter treatments, crack and crevice applications, sub-slab injections and residual barrier treatments. For subterranean termite control, methods may be employed such as trenching, rodding, crack and crevice injection or absorption for effective control.

Bifen I/T can also be used to control Armyworms, Cutworms, Sod Webworms, Annual Bluegrass Weevils, Billbugs, Black Turfgrass Ataenius, Leafhoppers, Mealybugs, Ants, Centipedes, Chinch Bugs, Fleas , Imported Fire Ants, Millipedes, Mole Crickets, Ticks, Pillbugs, Sowbugs and European Crane Flies. Please read the product label for directions and mixing instructions.

Where to Apply BIFEN I/T

Use Bifen I/T to treat infested areas in and around residential, commercial, public and industrial buildings. The product is for use in lawns, parks, recreational areas and athletic fields.

Catalyst Product Label

Catalyst Material Safety Data Sheet (MSDS)

Catalyst Insecticide - Pint

Catalyst Insecticide is a water-based insecticide containing 18.9% Propetamphos. Recommended for tough infestations, Catalyst provides residual control of several pest insects. The product contains a water-soluble plastic that creates a non-staining and long lasting residue for extended control. Catalyst is a non-repellent contact insecticide that provides a quick knockdown to target pests, making it an ideal product to complement baits.

Why Should You Use Catalyst Insecticide?

Catalyst Insecticide is a powerful contact insecticide that provides quick knockdown and residual control of target pests.

Directions for Catalyst Insecticide Use

Catalyst Insecticide is limited to crack and crevice treatments only. Please refer to the product label for information on the limits of its use. Crack and crevice treatments require solutions that contain 0.5% active ingredient content. Mix 3.2 ounces of Catalyst Insecticide in one gallon of water to produce a diluted solution. Using appropriate spray equipment, apply the solution to cracks, crevices, voids, entry points and other sites providing harborage to insects.

Do NOT use the diluted solution as a space spray.

Where to Apply Catalyst Insecticide

Catalyst Insecticide is for indoor use only. The use of this product is limited to food and non-food handling areas of food service establishments, office buildings, commercial buildings, industrial buildings, warehouses. The product is not for use in residential areas occupied by children and the elderly.

CB Intruder HPX Product Label

CB Intruder HPX Material Safety Data Sheet (MSDS)

CB Intruder HPX - 14 oz.

CB Intruder HPX-15 Residual with Cyfluthrin provides fast knockdown with 4-8 week residual action. CB Intruder HPX-15 Residual with Cyfluthrin is ideal for crack and crevice control in food handling areas.

Please refer to and follow the instruction on the CB Intruder HPX Product label.

CB Air Devil HPX Product Label

CB Air Devil HPX Material Safety Data Sheet (MSDS)

CB Air Devil HPX - 14 oz.

CB Air Devil HPX is an instant contact kill aerosol that also eliminates large number of pests. After the CB Air Devil HPX aerosol is used the protection will last up to 3 months.

Advantages of CB Air Devil HPX

Residual action provides up to 3 months of insect control
Specially developed to clear out large numbers of target insects fast
Quick knockdown plus low environmental impact

CB AIR DEVIL HPX IS FOR USE IN:

Homes, Laboratories, Kennels, Aircraft (cargo area), Buses, Apartments, Offices and the non-food/feed areas of Restaurants, Dairies, Milk Storage Rooms, Supermarkets, Hospitals (non-occupied patient areas), Egg Processing Plants, Bakeries, Bottling Plants, Institutions, Hotels, Motels, Stables, Schools, Nursing Homes (non occupied patient areas), Stores, Warehouses, Nurseries, Food Manufacturing, Processing and Servicing Establishments; Trucks, Trailers, Vessels, Railcars; Commercial, Industrial and Storage Buildings .

CB AIR DEVIL HPX FOR RESIDUAL PEST CONTROL :

Homes, laboratories; NON-FOOD/NON-FEED AREAS restaurants, dairies, milk storage rooms, supermarkets, hospitals (nonoccupied patient areas), nursing homes (nonoccupied patient areas), egg processing plants, bakeries, bottling plants, institutions, hotels, motels, kennels, stables, schools, nurseries, stores, warehouses, food manufacturing, processing and servicing establishments; Transportation aircraft (cargo area), buses, trucks, trailers, vessels, railcars; Storage commercial, industrial, apartment, office and storage buildings.

CB AIR DEVIL HPX FOR CRACK AND CREVICE APPLICATION:

Cockroaches, Spiders, Crickets, Silverfish, Firebrats use injector tip, releasing approximately 1 second spray per spot. For serious infestations, spray spots approximately 12 inches apart; for light infestations, spray approximately 3 feet apart. Spray into hiding places such as cracks, crevices, openings around pipes and sinks, under refrigerators, behind baseboards, coffee makers, meter boxes, and manholes. Spray directly on insects in these locations where possible. Repeat as necessary.

CB AIR DEVIL HPX IN FOOD HANDLING ESTABLISHMENTS:

Places other than private residences in which food is held, processed, prepared or served.
Non-food Areas: This product may be used as a general spot or crack and crevice treatment in non-food areas. All areas where insects hide or through which insects may enter should be treated. Non-food areas are areas such as garbage rooms, lavatories, floor drains (to sewers), entries and vestibules, offices, locker rooms, machine rooms, boiler rooms, garages, mop closets and storage (after canning or bottling).

Food Areas: Do not use in food/feed areas of food/feed handling establishments, restaurants, or other areas where food/feed is commercially prepared or processed. Do not use in serving areas while food/feed is exposed or facility is in operation. Serving areas are areas where prepared foods are served such as dining rooms but excluding areas where food may be prepared or held. In the home, all food processing surfaces and utensils should be covered during treatment or thoroughly washed before use. Exposed food should be covered or removed.

CRAWLING INSECTS:Sowbugs, Pillbugs, Millipedes, and Centipedes apply around doors and windows and other places where these pests may be found or where they may enter premises. Spray baseboards, storage areas and other locations. Repeat as necessary. See outdoor use below. ANTS: Apply to any trails, around doors and windows and other places where ants may be found.

WOOD DESTROYING INSECTS: Treat wood suspected of harboring all species of Termites, Carpenter Ants and Carpenter Bees. The purpose of such application of Air Devil Residual is to kill workers or winged form which may be present in the treated channels at the time of treatment and to impact a temporary resistance at these places to attack which may aid in the prevention of immediate reinfestation. Such applications are not a substitute for mechanical alternation, soil treatment or foundation treatment but merely a supplement. Localized treatment of wood-infesting insects locate suspected infestation and/or insect tunnels and cavities. Inject 5 to 10 seconds of spray into insect tunnels, galleries and inaccessible closed voids. In infested sites, pilot holes should be drilled eight to ten inches apart to insure thorough insecticide gallery treatment. Make sure not to contact electrical wiring, plumbing, etc., when drilling. Use available application equipment. For Carpenter Bees, seal entrance openings with small pieces of stainless steel wool after application.

CB AIR DEVIL HPX FOR OUTDOORS:

For control of Ants, Bees, Centipedes, Cockroaches, Crickets, Firebrats, Millipedes, Silverfish, Sowbugs, Pillbugs, Spiders, Flies,and Wasps apply as a residual spray to surfaces of refuse dumps and similar areas where these pests are found.

Conquer Product Label

Conquer Material Safety Data Sheet (MSDS)

Conquer Liquid Insecticide - 1 Pint

Widely used by PMPs due to its effectiveness, Conquer Insecticide is a general-use insecticide that targets hundreds of pest insects and provides lasting residues to prevent future infestations. The product's active ingredient is Estenvalerqate, a synthetic pyrethroid insecticide that is highly toxic to numerous pest insects even in low concentrations. Be a conqueror! Conquer pest infestations using Conquer Insecticide.

Why Should You Use Conquer Liquid Insecticide?

Conquer Insecticide covers a broad spectrum of controllable insects. The product is very economical, effective and long lasting.

Directions for Conquer Liquid Insecticide Use

Conquer Residual Insecticide concentrate may be diluted in water or oil. For general applications, mix one or two fluid ounces of Conquer EC with one gallon of water or oil. For light infestations, apply solutions containing 0.027% of the active ingredient (made by mixing one fluid ounce of Conquer CS with one gallon of water). Increase the active ingredient concentration when treating heavy infestations. Mix 2 fl. oz. of Conquer EC to a gallon of water to produce a solution containing 0.05% Estenvalergate. Apply solutions using appropriate spray equipment. Please read the product label for insect-specific control instructions.

Where to Apply Conquer Liquid Insecticide

Conquer Insecticide is for use in and around homes, apartments, schools, warehouses, office buildings, hotels, kennels, lawns, commercial buildings and industrial buildings.

Please refer to and follow the instructions on the product label.

Crack & Crevice II with Propoxur Product Label

Crack & Crevice II with Propoxur Material Safety Data Sheet (MSDS)

Crack & Crevice II Propoxur - 14 oz.

Crack & Crevice II with Propoxur is an insecticide that provides quick knockdown and long-lasting residual protection against crawling insect infestation with its superior formulation. It is ideal for direct contact kill, spot treatments and crack and crevice treatments in both residential and commercial locations, which include food handling areas. Crack & Crevice is easy to use, and can be applied upside-down, and right-side-up without leaking. Alternating with Crack & Crevice I will maximize the effect of crawling pest control.

For Use in and around: Apartments, Homes, Hospitals, Hotels, Food Storage Areas, Meat Packing Plants, Food Processing Plants, Motels, Nursing Homes, Restaurants and Other Food Handling Establishments, Supermarkets, Transportation Equipment (Buses, Boats, Ships, Trains and Planes), Warehouses and Other Commercial and Industrial Buildings.

Crack & Crevice Treatment:

Use Crack & Crevice II Propoxur with the supplied actuator and injection tubes. Inject Crack & Crevice II Propoxur into cracks and crevices or void spaces where insects may be harboring, living, and breeding. Place injector tip into cracks, crevices, holes, and other small openings where insects may enter. Spray into inaccessible areas behind and beneath sinks, stoves, cabinets, refrigerators, damp areas, and in and around waste containers.

Spot Treatment:

Use with the supplied actuator and injection tubes. Direct nozzle approximately 12 inches from surface to be treated. Apply directly on insects in these locations when possible.

Indoor Treatment:

Crawling Insects - Cockroaches, Dermestids, Scorpions, Spiders, Earwigs, Crickets, Sowbugs, Millipedes, Centipedes: Apply as a spot treatment or crack & crevice treatment. Spray into hiding places such as cracks and crevices, moist areas, openings around pipes and sinks, under refrigerators, behind baseboards, coffee makers, meter boxes, and manholes. Spray directly on insects in these locations where possible. Repeat as necessary

BOOKLICE & SILVERFISH: Spray cracks and crevices in baseboards, doorframes, bookcases, and storage areas. Spray directly on insects in these locations where possible. Repeat as necessary.

ANTS: Apply as a spot treatment or crack & crevice treatment. Spray into nests, trails, around doors, windows, into structural cracks and crevices, and wherever ants enter house. Spray directly on insects in these locations where possible. Repeat as necessary. Do not treat entire area of floor or floor covering.

Localized treatment of wood destroying insects:

CARPENTER ANTS and CARPENTER BEES: Locate source of infestation. Inject 5-10 seconds of spray into insect tunnels and cavities.

CARPENTER BEES: Seal entrance openings with small pieces of stainless steel wool after spray application.

TERMITES: Locate source of infestation. Apply to voids and channels in damaged wooden members of a structure or to cracks, spaces or bearing joints between wooden members of a structure. Inject 5-10 seconds spray into insect tunnels and cavities. This application is not a substitute for mechanical alteration, soil treatment, or foundation treatment but is merely a supplemental treatment. This product is intended to kill workers or winged reproductive forms which may be present in the treated areas.

Cy-Kick CS Insecticide Product Label

Cy-Kick CS Insecticide Material Safety Data Sheet (MSDS)

Cy-Kick CS Insecticide - 1 pint

Cy-Kick CS is a liquid insecticide with a 6.0% Cyfluthrin concentration. This fast-acting and long-lasting active ingredient effectively eliminates pests and provides a formidable barrier against future infestations indoors and outdoors. Using microencapsulation technology, Cy-Kick CS not only kills pest fast, its effects also lasts. Properly applied, Cy-Kick CS guarantees to provide your home a long-lasting pest protection for up to 3 months.

Why Should You Use Cy-Kick CS?

Cy-Kick CS is one of the best selling liquid insecticides trusted by professionals for its broad spectrum label, long residual life and effeciency.

Directions for Cy-Kick CS Use

First check the spraying equipment to be used in applying Cy-Kick CS and make sure that the equipment is clean and functioning. For your spraying equipment needs, PestMall offers a wide range of spraying equipment which can be found here.

Shake vigorously a pint of Cy-Kick CS Controlled Release Cyfluthrin Insecticide before diluting in 16 gallons of water. A ratio of 1 or 2 fluid ounces of Cy-Kick CS to a gallon of water yield 0.05% and 0.10% concentrations respectively. Concentrations may be varied depending on applications such as infestation intensity or residue control. Mix and agitate the spray solution to ensure an even mixture before spraying.

Surfaces must be prepared and thoroughly cleaned before commencing the treatment. Before treating, surfaces must be checked for exposed electrical connections and water presence. Cy-Kick CS should not be applied directly onto drifting water, which may contaminate water supplies in inhabited areas.

The product is extremely toxic and must be kept out of reach of children. Remember to wear safety apparel such as masks, gloves, goggles, boots and protective clothing before spraying.

Where to Apply Cy-Kick CS

Indoor Applications

Apply Cy-Kick CS indoors by first adding fluid ounce of Cy-Kick CS to a gallon of water for a 0.05% spray solution or increase Cy-Kick CS to water ratio as recommended. (Please refer to the Spray Dilution Chart)

Prepare and thoroughly clean indoor surfaces before treatment. Spray the diluted solution of Cy-Kick CS to infested areas, cracks, crevices and other areas frequented by pests. Treatments must be done 3 days apart if necessary.

Outdoor Applications

Apply Cy-Kick CS outdoors by first adding fluid ounce of Cy-Kick CS to a gallon of water for a 0.05% spray solution or increase Cy-Kick CS to water ratio as recommended. (Please refer to the Spray Dilution Chart)

Prepare and thoroughly clean outdoor surfaces before treating them. Spray the diluted solution of Cy-Kick CS to infested areas, cracks, crevices and other areas frequented by pests. Treatments must be done 3 days apart if necessary. Treat perimeter soil and building foundations to prevent future infestations.

CyhaloCap CS Product Label

CyhaloCap CS Material Safety Data Sheet (MSDS)

CyhaloCap CS Insecticide - 1 pint

High-performance microencapsulation technology for residual control. CyhaloCap CS (Capsule Suspension) Insecticide provides broad-spectrum, residual control of structural pests for PMPs who prefer lambda-cyhalothrin.

For Use in and Around: Indoor and outdoor

Product Description

CyhaloCap CS is a dilutable spray containing BASF's proprietary SmartCap microencapsulation technology and featuring lambda-cyhalothrin, a proven active ingredient with broad spectrum activity and effective residual control of structural pests.

Cynoff WP Product Label

Cynoff WP Material Safety Data Sheet (MSDS)

Cynoff WP - 1 lb.

The power of Cypermethrin is now available in powder form with FMC's Cynoff WP. Excellent for broadcast, perimeter, and crack and crevice treatments, Cynoff delivers superior residual and contact kill to common pests. Cynoff WP has an active ingredient content of 40%, nearly doubling that of Cynoff EC. WP is a cost-effective insecticide that can yield up to 48 gallons of solution at the cost less than its competitors.

Why Should You Use CYNOFF WP?

Cynoff cost less but performs better than other insecticide brands.

Directions for CYNOFF WP Use

Cynoff WP must be diluted in water for spray or brushing applications. The product comes with a plastic scoop with 0.33 oz. capacity. Use a full scoop of Cynoff WP per gallon of water to yield a solution having 0.1% of the active ingredient. Doubling the amount of the concentrate yields solutions with 0.2% active ingredient content. Depending on the target pest/s, solutions must have 0.1% to 0.2% active ingredient content.

Apply the product as a coarse, low pressure spray to infested areas and potential insect-harboring sites such as basements, attics, behind and under appliances, storage areas, cabinets, shelves, baseboards, under sinks and along plumbing. Pay particular attention to cracks, crevices and voids.

Using hand or power sprayers, apply the product by brush or residual spray to building surfaces, porches, window screens, patios, lawns and other grass areas to control outdoor insects.

For barrier treatments, create a band measuring 6 to 10 feet around structures to protect them from infestations. Apply the product as a coarse spray, at the rate of 1 gallon per 400 square feet. Also treat building foundations and other potential entry points to a height of 3 to 5 feet.

Where to Apply CYNOFF WP

Cynoff WP is for residual pest control in and on buildings and structures including: industrial buildings, houses, apartment buildings, laboratories, buses, greenhouses, and the nonfood/feed areas of stores, warehouses, vessels, railcars, trucks, trailers, aircraft (Do not use in aircraft cabins), schools, nursing homes, hospitals, restaurants, hotels, and food manufacturing, processing, and servicing establishments.

Delta Dust Product Labe

Delta Dust Material Safety Data Sheet (MSDS)

How to Apply Dust Insecticide

Delta Dust - 1 lb.

Bayer's Delta Dust is a waterproof insecticide in powder form. Unlike other dusts and residuals, Delta Dust stays dry and active even when applied in areas with high humidity and moisture. Pests prefer damp places such as under sinks and along plumbing and Delta Dust is the perfect control product to use. Fast acting and long lasting, this contact insecticide kills pests upon contact remains active for up to 8 months! Low active ingredient concentration makes the product safe for use even in food handling areas.

Please read the product label for application instructions and the recommended application rates. Pestmall offers Centrobulb Dusters and Bellow Dusters needed to apply Delta Dust Insecticides.

Why Should You Use Delta Dust?

Unlike other dust insecticides, Delta Dust stays dry and effective and remains so for eight long months.

Directions for Delta Dust Use

Delta Dust should be applied uniformly over treatment areas using proper application equipment such as hand dusters, power dusters or paint brushes. Pay special attention to cracks and crevices, voids, under appliances, ducts, plumbing, attics, crawlspaces, baseboards and other sites frequented by pests.

Control listed pests by treating infested areas with Delta Dust at the rate of 2 to 3 grams per 1,000 square feet. Repeat treatments if necessary.

FOR CONTROL OF ANTS, BLACK CARPET BEETLES, BOXELDER BUGS, CENTIPEDES, COCKROACHES, CRICKETS, FLEAS, FIREBRATS, GROUND BEETLES, MILLIPEDES, SCORPIONS, SPIDERS SOWBUGS,SILVERFISH AND WEBBING CLOTHES MOTHS: Thoroughly apply the product to areas where these pests are known to frequent, breed, hide and congregate. Apply the product over ant trails and entry points such as windows and doors. Treat pet sleeping quarters, moist areas under sinks, under and behind refrigerators, inside cabinets and other known infestation sites of the above listed pests.

TERMITES, CARPENTER ANTS AND CARPENTER BEES: Apply the product through cracks and voids on wooden components damaged by wood-boring insects. Treat surfaces vulnerable to infestations such as foundations and walls. Holes may be drilled through damaged components in order to treat inaccessible tunnels and galleries inside. Use this product as a supplement to other treatments.

WASPS AND BEES: Wear protective clothing to avoid stings. It is recommended to treat nests late in the day where wasps/bees are generally less active. Uniformly apply Delta Dust over wasp/bee nests, entrances and their immediate surroundings. Drilling may be necessary to apply the product inside nests.

BEDBUGS: Delta Dust can be used together with other insecticides to treat bed bug infestations. Apply dust to folds and tufts of mattresses, headboards, footboards, springs, bed frames, cracks and spaces between components, furniture, upholsteries and other infested areas. Let the product settle for 4 to 6 hours and thoroughly vacuum treated areas afterwards.

STORED PRODUCT PESTS SUCH AS CADELLES, CHEESE MITES, CIGARETTE BEETLES, CONFUSED FLOUR BEETLES, DARK MEAL WORMS, DRUGSTORE BEETLES, GRAIN MITES, GRANARY WEEVILS, LESSER GRAIN BORERS, MERCHANT GRAIN BEETLES, RED FLOUR BEETLES, RICE WEEVILS, RUSTY GRAIN BEETLES, SAWTOOTHED GRAIN BEETLES, SPIDER BEETLES, TOBACCO MOTHS AND YELLOWMEAL MOTHS: Thoroughly clean storage areas from dirt, debris, dust and dispose of contaminated/infested products. Apply dust to floors, walls and surfaces in storage and handling areas. Treat cracks and crevices, shelves and other sites that may provide harborage to insects.

Where to Apply Delta Dust

Aircrafts, Animal Quarters/Kennels, Apartments, Buses, Food/Feed Manufacturing, Processing and Service Establishments, Greenhouses, Grocery Stores and Supermarkets, Hospitals, Hotels, Motels, Houses, Industrial Buildings and Installations, Laboratories, Mausoleums, Mobile Homes and Recreational Vehicles, Nursing Homes/Day Care Centers, Rail Cars, Restaurants, Schools, Sewers, Stores and Institutions, Telecommunication Conduits, Theaters, Trucks and Trailers, Utility Vaults and Conduits, Vessels, Warehouses and Zoos.

Deltagard G Product Label

Deltagard G Material Safety Data Sheet (MSDS)

DeltaGard G Granule - 20 lbs.

DeltaGard G Insecticide Granule is specially formulated for outdoor use to control common lawn pests. Broad spectrum, easy to apply and outright effective, DeltaGard delivers complete control over outdoor infestations. Highly soluble granules dissolve easily in water and seep through the soil, eliminating burrowing pests.

Why Should You Use DeltaGard G Granule ?

DeltaGard is a broad label insecticide that targets over 40 lawn pests and is totally safe for use in perimeter soil and turf areas.

Directions for DeltaGard G Granule Use

Apply the product evenly to treatment areas using granular spreaders or similar equipment. Apply at the rate of 2 to 3 pounds per 1, 000 square feet. For control subsurface pests, use the higher application rate. Irrigate treated areas immediately after treatments to dissolve the granules and improve efficacy.

For perimeter treatments, treat a band of soil measuring 5 to 10 feet in width around and adjacent to structures. Treat at a rate of 1 to 1 1/2 pounds every 500 square feet.

Treat ant, digger wasp and imported fire ant nests/mounds with 1 to 2 teaspoons of granules in and around each mound. Irrigate the mound/nest and its immediate surroundings to dissolve the granules.

Where to Apply DeltaGard G Granule

DeltaGard is for outdoor use only to treat infestations in laws, landscapes, turfgrass and around perimeters of residential, commercial and recreational areas.

Demand CS Product Label

Demand CS Material Safety Data Sheet (MSDS)

Demand CS Brochure

Demand CS - 8 oz

Demand CS is a highly active insecticide featuring Syngenta's iCAP microencapsulation technology. By encapsulating Lambda-Cyhalothrin, Demand CS produces residuals that are waterproof, photo-stable, and long lasting. Controlled release of the active ingredient greatly increases residual life at the same time reduce the residue's odors and stains. Versatile and economical, Demand mixes well with other registered pesticides and can be diluted and applied in very low concentrations.

Why Should You Use DEMAND CS ?

Demand CS uses microencapsulation techniques to extend the life end efficiency of residuals.

Directions for DEMAND CS Use

Use Demand CS for surface, crack and crevice or spot treatments. The product comes as a concentrate that must be diluted with water and applied using application equipment such as hand/power sprayers.

Shake well before using. Mix Demand CS with water to produce solutions. Finished solutions can be converted to foam using foaming agents to treat structural voids and nests. Solutions may have 0.015% to 0.06% active ingredient content, depending on the target pest/s and the severity of their infestations. Other registered insecticides may be added to yield solutions with multiple capabilities. Please read the product label for dilution tables and application rates.

Apply as a coarse, low pressure spray to indoor or outdoor sites and surfaces. Spray to areas where insects are seen congregating, hiding, breeding and other potential harborage areas. Pay special attention to cracks, crevices and voids in structures. Treat these areas with liquid or foam using appropriate equipment and methods.

Demand CS can also be used to create perimeter barriers, treat infestations in ornamental plants and turf and for subsurface treatments to control mole crickets and ants. Refer to the product label for specific instructions on how to control target pests.

Where to Apply DEMAND CS

Demand CS is for use in, on and around residential, commercial, institutional, public, agricultural and industrial buildings/structures.

Demand G Product Label

Demand G Material Safety Data Sheet (MSDS)

Demand G Granules - 25 lbs.

With an innovative formulation process, the granular perimeter treatment of Demand G with Active Release technology provides powerful and efficient protection against nearly 30 species of pests. Demand G is exclusively engineered with an enhanced solvent for the optimal release of its active ingredient, lambda-cyhalothrin, from the granule. Demand G is specially formulated of optimal release of insecticide and ideal for applications in damp and windy conditions. Demand G is labeled for lawn, landscape and perimeter use. Demand G is also superior in efficiency and provides more treatments per package than traditional granules. Demand G is approved for residential, commercial, and institutional applications.

Useful Tips You May Need to Know

We recommend applying Demand G Granules with handle spreader for easier and more effective application.

Advantages of Demand G Granules

Specially formulated of optimal release of insecticide

Ideal for applications in damp and windy conditions

Labeled for lawn, landscape and perimeter use

Superior efficiency provides more treatments per package than traditional granules

Approved for residential, commercial and institutional applications

For control of ants, beetles, crickets, earwigs, firebrats, millipedes, mites, silverfish and sowbugs as commonly found around or near foundation of structures as well as in yards with Demand G:

Some of these pests may enter houses. Applying a continual band of insecticide around a building foundation can greatly reduce the potential for entry by crawling pests. For optimal control, remove debris and leaf litter from next to the foundation, cut back vegetation and branches that touch the foundation, and move or rake back rocks, deep mulch, or other potential pest harborage next to the foundation prior to application. Apply a 3 to 5 foot band of granules next to the structure foundation. Apply at the rate of 2 to 3 lbs. per 1000 square feet. Distribute granules uniformly. For optimal control, water lightly to dissolve granules.

For control of ants, armyworms, centipedes, crickets, cutworms, earwigs, grasshoppers, green June beetles, Japanese beetles (adult), leafhoppers, millipedes, mites, pillbugs, sod webworms, spider mites, spittlebugs and springtails with Demand G:

Apply at the rate of 2 to 3 lbs. per 1000 square feet with a fertilizer spreader when grass is dry. For best results, water lawn lightly to dissolve granules.

For control or suppression of billbugs, chinch bugs, dung beetles, green June beetle grubs, Hyperodes weevils, Japanese beetle grubs and mole crickets, immediately water grass thoroughly after application with Demand G:

For billbug control, apply when activity is first observed or when chewed or brown grass indicates damage from these insects. For grub suppression, except dung beetle, treat any time between late July and early October. For dung beetle grub suppression, apply in spring or early summer when damage is first noticed. For best results, water grass thoroughly with 1/4 to 1/2 inch of water as soon as possible following application. Treat again in late summer or early fall if a second generation occurs. For chinch bugs, use higher rates during summer when both nymphs and adults may be present. For mole crickets, make applications for adults during early spring when grass areas may be subject to continuous invasion. For best results, apply as late in the day as possible and water in with up to 0.5 inches of water as soon as possible following treatment. When the soil is not moist, irrigation before application will bring mole crickets closer to the surface to enhance contact with the granule. Applications at the time of peak egg hatch will increase control of early nymphal stages that are more susceptible to insecticides. As nymphs mature, higher rates may be necessary.

Spot Treatment for Ants with Demand G:

For general ant control, apply 11/2 teaspoons over and around each ant hill. Lightly water to dissolve granules. Apply water gently to avoid disturbing ants, first breaking any necessary soil crust to ensure water penetrates the nest. Use of high pressure watering equipment may disturb the ants and cause migration-reducing product effectiveness. NOTE: For best results, apply in cool weather, 60 to 80 F, in early morning, or late evening hours. Treat near mounds as they appear. Difficult or extensive ant infestations will benefit from a combination of broadcast treatments and spot applications. If soil is not moist, irrigate before application to bring ants closer to the surface to enhance control with Demand G Insecticide granules. Do not apply this product to edible growing crops or stored raw agricultural commodities used for food or feed. Do not allow applications to contact water inhabited by fish, such as in ornamental fish ponds that are located around structures being treated. Do not apply this product by aerial application. Use of this pesticide adjacent to water may affect aquatic organisms. To protect these organisms, do not apply this pesticide within 25 ft. of lakes, reservoirs, rivers, permanent streams, marshes or natural ponds, estuaries, and commercial fish farm ponds. In the state of New York, do not apply within 100 ft. of coastal marshes or streams that drain into coastal marshes. Observe all restrictions and precautions which appear on the labels of these products. Do not apply more than 0.36 lbs. of the a.i. (800 pounds of Demand G Insecticide) per year. Good coverage is necessary to provide the most effective level of control. Consult your state university or local Cooperative Extension Service office for specific pest control application timing in your area. Application to turf should be started prior to the establishment of high insect pest populations and significant turf damage. Make reapplications as necessary to keep pest populations under control, using higher rates as pest pressure increases.

CB D-Force HPX Product Label

CB D-Force HPX Material Safety Data Sheet (MSDS)

CB D-Force HPX - 14 oz.

The CB D-Force HPX is one of the best-selling aerosol insecticides in the market. D-Force HPX provides fast killing action and residual control over 50 species of pest insects. Properly applied, the product residues remain potent for up to 8 weeks, making the product an ideal supplement to several types of bait. Both the D-Force HPX and D-Foam contain low concentrations of the synthetic insecticide Deltamethrin. Low active ingredient and volatile organic compound (VOC) content makes the product ideal for use in residential and food-handling areas of buildings.

Why Should You Use CB D-Force HPX ?

CB D-Force has a broad spectrum label, long residual half-life and a powerful formula to effectively control invasive pests.

Directions for CB D-Force HPX Use

Shake well before each use. Hold the container upright and hold the can 12 to 15 inches away from treatment areas. Use the supplied actuator for crack and crevice treatments. Direct the nozzle towards the treatment area and apply the product as recommended in the product label.

Spray sufficient amounts of CB D-Force directly over insects or to sites where pests are seen. Pay particular attention to areas harboring insects such cracks and crevices, under appliances, sinks and other potential hiding and breeding spots. For bedbugs, remove beddings and apply the product in tufts, folds and the bed frame. Wash beddings before reusing.

CB D-Foam is suitable for surface applications, crack and crevice applications, spot treatments and wall void applications. To control subterranean termites in above-ground areas of structures, first locate galleries, voids and tunnels in wooden structural components using available location techniques. It is sometimes necessary to drill holes in order to access and inject foam into insect galleries. Apply the product to voids/areas where insects frequent, breed, and hide.

Carefully read the product label for application instructions and precautions.

Where to Apply CB D-Force HPX

CB D-Force is for use in and around: Homes, Apartments, Hospitals, Hotels, Food Handling Establishments, Restaurants, Food Processing Plants, Industrial Buildings, Storage Areas, Warehouses, and Transport Vehicles.

DRAGNET SFR Product Label

DRAGNET SFR Material Safety Data Sheet (MSDS)

Dragnet SFR - 1 Qt

From the makers of CB Residuals and Talstar insecticides comes another revolutionary termiticide with enhanced residual and contact kill capabilities. FMC's Dragnet SFR Termiticide/Insecticide does not break down easily in soil and retains its potency for extended periods of time. Specially formulated for subterranean termites, Dragnet also targets a wide range of indoor and outdoor pest insects. Versatile and very economical, one quart yields 100 gallons of solution that can be used in a variety of applications.

Why Should You Use Dragnet SFR ?

Dragnet SFR is superior in both residual control and contact kills to more than 50 insects in its label.

Directions for Dragnet SFR Use

Dragnet SFR is a concentrate that must be diluted in water to create emulsions. Active ingredient content may vary from 0.5% to 2.0% depending on treatments or target pests. Use this product for pre-construction treatments of structures or to treat existing termite infestations in and around buildings and structures. Knowledge of treatment techniques such as rodding, trenching, sub-slab injections, void injections and crack and crevice treatments is essential in order to have effective control of termites. Use this product for residual pest control in and on buildings and their immediate surroundings. Dragnet SFR may be used in broadcast applications, spot applications, crack and crevice injections or as a paint-on treatment. Consult the product label for more details.

Where to Apply Dragnet SFR

Dragnet SFR is for use in and around residential, commercial, public and industrial buildings. This includes homes, apartments, laboratories, greenhouses, non-food areas of food handling store areas, warehouses, schools, nursing homes, hospitals, transports and food processing, manufacturing and servicing establishments.

Eco Exempt IC 2 Product Label

Eco Exempt IC 2 Material Safety Data Sheet (MSDS)

Eco exempt IC-2 Insecticde (Essentria IC - 3)

Eco exempt IC-2 Insecticde (Essentria IC - 3) uses a knockdown method to kill pests the minute they come into contact with it. EcoExempt IC is an all-natural substance made from oils such as rosemary, wintergreen, and eugenol. Unlike chemical pesticides, EcoExempt IC-2 leaves behind a botanical scent. EcoExempt IC- 2 works great for corners, cracks, and crevices.

Inside: Apartment buildings, bakeries, beverage plants, bottling facilities, breweries, cafeterias, candy plants, canneries, cereal processing and manufacturing plants, dairy barns, poultry facilities, flour mills, food processing plants, frozen food plants, homes, hospitals, hotels, houses, industrial buildings, kennels, kitchens, laboratories, manufacturing facilities, mausoleums, meat processing and packaging plants, meat and vegetable canneries, motels, nursing homes, office buildings, restaurants, schools, stores, supermarkets, warehouses, and similar structures.

Outside:Building foundations, dairy facilities, drive-in restaurants, drive-in theaters, golf courses, parks, playgrounds, poultry houses, recreational areas, schools, urban areas, lawns, landscape areas, trees, turf, and zoos.

For sensitive indoor/outdoor surfaces such as vinyl, plastic, fabric, wood floors, etc. test a small non-visible area first before spraying. This includes vinyl siding, outdoor furniture, storm doors and windows, etc. It is possible that EcoEXEMPT IC2 may mar some sensitive surfaces. If spray gets on any sensitive surface that is listed, simply rinse with water and wipe off with clean cloth. EcoEXEMPT IC2 may be diluted with water or oil and applied with conventional application equipment including, but not limited to, compressed air sprayers and power sprayers. When diluting with water, prepare only the amount needed for immediate use and maintain agitation during use. Do Not Store Spray Solution Overnight. For oil dilutions that are applied in food handling establishments, a deodorized petroleum oil which conforms to CFR 21 (especially section 172.884) is required (such as Exxon Isopar M, Ashland Low Odor Base Solvent, or the equivalents). Tank mix applications must be made in accordance with the more restrictive of label limitations and precautions. No label dosages may be exceeded. This product cannot be tank mixed with any product with label prohibitions against such mixing.

Advantages of EcoEXEMPT IC-2

Quick knockdown/kill
Residual protection
Flexible label
Indoor/outdoor use
Broad spectrum
Non-staining
Highly versatile
Low aquatic toxicity
For conventional, misting and fogging equipment
Great for mosquito control programs
New softer botanical scent
May be used for on-animal applications

Do not apply directly to house plants. Cover/avoid any pools or aquaria prior to spraying.

GENERAL PEST CONTROL with Eco EXEMPT IC - 2:

To control accessible, exposed stages of crawling insects including, but not limited to, Ants, Cockroaches, Cadelles, Cigarette Beetles, Dark Mealworms, Dried Fruit Beetles, Drugstore Beetles, Confused Floor Beetles, Grain Mites, Fowl mites, Mites, Red Flour Beetles, Rice Weevils, Saw-toothed Grain Beetles, Spiders, Spider Beetles, Termites, Yellow Mealworms in sites that include, but are not limited to, apartments, homes, restaurants, food processing plants, industrial installations and warehouses, dilute at the rate of up to .5 to 6 fluid ounces of EcoEXEMPT IC2 per gallon of water (use lower rate for maintenance service and higher rates for active infestations). Thoroughly spray non-visible areas where these insects are usually found with special attention to cracks and crevices, niches, dark corners, drains and other harborage sites. To prevent potential discoloring, do not spray on visible areas (i.e. baseboards, door frames, walls, etc.) and wipe away excess. Food processing operations may continue when EcoEXEMPT IC2 is applied as a surface, spot or crack and crevice treatment in accordance with the directions and precautions given above.

FOGGING with Eco EXEMPT IC - 2:

To control crawling and flying insects (Flies, Moths, Fruit Flies, etc) in sites that include, but are not limited to, food processing plants, (INCLUDING USDA INSPECTED FACILITIES), industrial installations, animal quarters (cattle barns, horse barns, poultry barns, swine houses, zoos and warehouses), EcoEXEMPT IC2 may be applied as a space spray through conventional fogging equipment. Cover or remove exposed food and cover food-handling surfaces in edible product areas of food handling establishments. Also cover sensitive surfaces (plastics, etc). Close and shut off air conditioning or ventilating equipment. Mix 4 to10 ounces of EcoEXEMPT IC2 insecticide with sufficient oil to equal 1 gallon of diluted spray. (It is recommended to use lower rates in most food facility applications). Apply at a rate of 1 to 3 fluid ounces per 1000 cubic feet, filling the room with mist (or fog, if thermal equipment is used). Keep area closed for at least 15 minutes. Vacate treated area. Ventilate before reoccupying. Fogging may create slippery conditions on painted floor surfaces. Retreat if reinfestation occurs. The product does contain plant oils that are inherently fragrant. When used in confined spaces, prolonged exposure to the fragrance may be objectionable to some individuals.

Eco Exempt G Product Label

Eco Exempt G Material Safety Data Sheet (MSDS)

Eco Exempt G Granules

Eco Exempt G Granules offers total residual protection that includes knockdown, kill and repellency to outdoor pests such as ants, cockroaches, centipedes and many more. Eco Exempt features Hexa-Hydroxyl, a combination of plant oils (Thyme Oil and Clove Oil) known to have potent insecticidal properties. Effective, safe and economical, this product provides the same performance as other pesticides without the risk to humans, animals and the environment.

Why Should You Use Eco Exempt G Granules?

Using natural oils for control of pests, Eco Exempt is one of the safest insecticides available.

Directions for Eco Exempt G Granules Use

Eco Exempt G is intended for outdoor applications only. With hand-operated or powered spreaders, use the product for outdoor perimeter treatments and broadcast applications. Reapply if necessary.

FOR PERIMETER TREATMENTS: Apply uniformly as possible to ground area around and adjacent to structures. Treat bands of soil measuring 6 to 10 ft. in width at the rate of 2 to 5 lbs. per 1,000 square feet.

FOR BROADCAST TREATMENTS IN TURF AND LANDSCAPED AREAS: Apply at a rate of 3 to 5 lbs. per 1,000 sq. ft. of area. Irrigate treated area with ⅛ to 1/4 inches of water for best results.

Where to Apply Eco Exempt G Granules

Eco Exempt G is for use in landscaped areas and perimeters around residential, institutional, public, commercial and industrial buildings.

Eco PCO ACU Product Label

Eco PCO ACU Material Safety Data Sheet (MSDS)

Ecopco Acu Aerosol - 17 oz.

From the world leader in environmentally-safe pest control solutions, EcoSMART introduces a new contact insecticide for crawling and flying insects. EcoPCO is an unscented insecticide with Phenethyl Propionate, a natural substance derived from plants known to have insecticidal properties. This aerosol leaves no harmful residues and odors, making it ideal for use inside homes and around humans and pets.

Why Should You Use EcoPCO ACU Aerosol?

EcoPCO is safer than pyrethoid and chemical insecticides for it contains plant oils that have little effect on humans and pets.

Directions for EcoPCO ACU Aerosol Use

Shake well before using. EcoPCO is a contact insecticide that does not provide residual protection. Ensure contact with insects for effective kills. Aim directly towards insects. Apply uniformly to surfaces and spaces where insects are seen flying and crawling. Use this product for crack/crevice and void treatments by using the supplied nozzle tip. Inject to cracks, crevices, voids and other hard-to-reach areas to treat infestations.

For Crawling Insects: Crack/Crevice and Void Treatments. Important: Use the injector nozzle tip provided. Inject EcoPCO ACU Aerosol into all crack/crevice and void spaces where insects are present. Applications of EcoPCO ACU Aerosol can be made, but are not limited to, behind baseboards, cabinets, walls, ceilings, door and window frames, and around water pipes and appliances. Insects contacted by spray will be killed. Ensure contact with as many insects as possible.

Fleas & Brown Dog Ticks: Hold EcoPCO ACU Aerosol can approximately 12 inches above surface area and apply EcoPCO ACU Aerosol uniformly to infested areas such as carpets, rugs, cloth upholstery, and pet bedding. Contact fleas & ticks directly to kill these pests.

For Flying Insect Treatments: To kill these pests, aim EcoPCO ACU Aerosol spray toward flying insect infestations contacting as many insects as possible. Insects contacted by spray will be killed. Wipe away excess spray after application. Avoid spraying plants.

Where to Apply EcoPCO ACU Aerosol

Use EcoPCO ACU to kill pests in, on and around residential, commercial and industrial buildings and their immediate surroundings.

Eco PCO WP X Product Label

Eco PCO WP X Material Safety Data Sheet (MSDS)

EcoPCO WP X - 1 lb

EcoSMART's line of safe pesticides for home use is now available in the form wettable powder for residual control in and around residential, commercial and industrial buildings. EcoPCO is a broad label insecticide containing the same natural active ingredients as other EcoSMART products. EcoPCO WP combines three botanical insecticides in one package that is just as efficient as other chemically-based insecticides.

Why Should You Use EcoPCO WP X?

EcoPCO WP∙X provides excellent control over indoor and outdoor pests without the risks associated with chemical-based pesticides.

Directions for EcoPCO WP X Use

EcoPCO WP∙X is a wettable powder that must be diluted in water and applied using hand-operated or power sprayers. Thoroughly clean application equipment before using. Fill applicator tank half full with water. Add the recommended amount of EcoPCO as stated in the product label. Active ingredient concentrations may vary from 0.0125% to 0.05%, depending on the target pest/s and the severity of infestations. Agitate the tank to ensure an even mixture. Tanks should be agitated regularly to maintain satisfactory suspension.

FOR INDOOR APPLICATIONS: Spray pressure should not exceed 50 psi. Apply as a coarse, low-pressure spray to infested sites. Inject cracks, crevices and voids using injectors. Treat interior and exterior surfaces of cabinets, baseboards, sinks, closets, storage areas, appliances, plumbing and other entry/exit sites. Please read the product label for directions on how to conduct treatments for specific pests.

FOR OUTDOOR APPLICATIONS: Using hand or power sprayers, apply as a residual treatment to outdoor surfaces such as screens, window sills, doors, porches, patios, garages and other areas where pests are found. The product can be applied to landscaped areas and ornamental plants or in barrier treatments around and adjacent to buildings. Please refer to the product label for instructions on how to conduct outdoor treatments.

Where to Apply EcoPCO WP X

EcoPCO is for use inside, on, and around residential, commercial, institutional and industrial buildings. Areas of use include apartments, homes, hotels, motels, schools, hospitals, nursing homes, factories, stores, warehouses, restaurants, supermarkets, zoos, food processing and handling establishments and transportation equipment such as aircraft, buses, trailers, trucks, trains, ships and vessels.

Fast Out CS Foam Product Label

Fast Out CS Foam Material Safety Data Sheet (MSDS)

FastOut CS Foam Tech Note

FastOut CS Foam

FastOut CS Foam is a non-repellent insecticide that features SmartCap microencapsulation technology. Developed by Whitmire Micro-Gen, SmartCap bolsters the performance of residuals, leading to fast kills and effective control of infestations. FastOut contains microencapsulated Cyfluthrin in a non-repellent foam solution with an exceptional expansion rate. Available in a ready-to-use bottle that provides easy delivery of foam to cracks and voids for quicker control of target pests.

Why Should You Use ?

FastOut CS is a ready-to-use product for foam applications. No measuring, no mixing and no equipment necessary. Just point and shoot, all your pest problems are gone with FastOut.

Directions for Use

Shake well before use. FastOut CS can be used for crack and crevice treatments or spot treatments to treat infestations in cracks and crevices, voids, or in exposed areas. The product is intended for support treatments in localized areas in structures and cannot be used as a substitute for stand-alone termite treatments. With the attached injector tube and tip, hold the actuator for about 8 seconds and dispense the product thoroughly in treatment areas. Application to exposed areas must be limited to sites with minimum exposure. When treating exposed areas, allow the foam/residue to dissipate and clean the area afterwards. Inject the product through structural voids, insect galleries, nests and other insect hiding spots. Treat trails, entry/exit sites and other areas where pests are found entering/exiting structures. Please refer to the product label for specific use directions.

Where to Apply

FastOut CS is for use in: Apartments, Homes, Hospitals, Hotels, Food Handling Establishments, Restaurants, Hotels, Hospitals and Nursing Homes (Non-patient Areas), Motels, Hobby Greenhouses, Interiorscapes, Office Buildings, Schools, Transportation Equipment (Buses, Boats, Ships, Trains, Planes) and Warehouses and Other Commercial and Industrial Buildings.

Bifen Granule Product Label /

Bifen Granule Material Safety Data Sheet (MSDS)

Bifen L/P Granules - 25 Lbs.

Bifen Granular features a long lasting residue that protects lawns and perimeters from insect infestations. The granular insecticide acts by impairing the nervous systems of insects for effective control. Bifen L/P is for use to control ants, worms, weevils, crickets, leafhoppers, millipedes, centipedes, ticks, pillbugs, flies and other pest insects.

Bifen L/P helps keep your lawns and perimeters free from outdoor pests such as ants, centipedes, crickets, flies, millipedes, weevils and other invasive insects. Each bag of Bifen L/P contains 0.20% Bifenthrin, a powerful pyrethoid insecticide that is highly effective against common lawn pests. In addition, the product leaves a long-lasting residue that lasts for months.

*Depending on availability, you will get either Bifen Granules or Wisdon Granules. Both products are EXACTLY THE SAME.

Why Should You Use Bifen Granulars ?

Bifen L/P is one of the longest-lasting residual insecticides in the market due to its low solubility in water. A single application of Bifen granules to treatment area leaves residues that last for up to 8 months!

Target Pest(s):

Armyworms, Cutworms, Sod Webworms, Annual Bluegrass Weevils, Billbugs, Black Turfgrass Ataenius, Leafhoppers, Mealybugs, Ants, Centipedes, Chinch Bugs, Fleas , Imported Fire Ants, Millipedes, Mole Crickets, Ticks, Pillbugs, Sowbugs, European Crane Flies.

Directions for Bifen Granulars

For broadcast treatments, application equipment such as dusters should be used to ensure uniform applications of Bifen L/P to treatment areas. Apply Bifen L/P following the application rates found in the product label. Apply the product as directed in the product label. Most applications require treated areas to be watered to release (activate) the active ingredient from the granules. For broadcast applications in residential areas, do not apply more than 0.2 lbs of the product per acre of treatment area. Application rates may be increased to not more than 0.4 lbs of Bifen L/P's active ingredient per acre for non-residential areas. For fire ant mound treatments, apply 1/2 cup of Bifen Granulars directly over mounds and induce 1 to 2 gallons of water to the mound.

here to Apply Bifen Granulars

Use Bifen L/P to control pests in lawns, landscaped areas and perimeters around residential, commercial, industrial buildings, parks, athletic fields and recreational areas. The product should be used to treat golf courses, nurseries, greenhouses and sod farms.

Note: electrical transformers appear to the more attractive to ants during the cooler months. For best results treat in the Fall or early Spring.

Ever Green Dust Product Label

Ever Green Dust Material Safety Data Sheet (MSDS)

PyGanic Dust (EverGreen Pyrethrum Dust) - 10 oz.

One of the most trusted insecticide dusts, PyGanic delivers fast control over 230 pests. Each bottle of PyGanic contains pure, unsynergized Pyrethrum derived from chrysanthemum flowers. With its natural active ingredient and non-toxic formulation, PyGanic is safe to use in food/feed handling areas, livestock animals and ornamental plants.

Why Should You Use?

EverGreen Pyrethrum Dust can be used to control different kinds of infestations.

Directions for Use

Please read the product label for application instructions and the recommended application rates. Pestmall offers Centrobulb Dusters and Bellow Dusters needed to apply PyGanic Dust (EverGreen Pyrethrum Dust) Insecticides.

TREATMENT OF STORED PRODUCT PESTS IN NON-FOOD/FEED AREAS: Before treatments, clean infested areas and remove infested materials, dirt and other debris. Apply at the rate of 16 to 24 ounces per 1,000 square feet of area. Thoroughly treat surfaces, floors, shelves, drawers, cabinets, cartons, containers in storage areas. Apply one ounce per 50 square feet into cracks and crevices, voids and other hard to reach areas.

INDOOR TREATMENT OF CRAWLING INSECTS: Apply EverGreen Dust at the rate of 1.5 oz. per 50 sq. ft. into cracks, crevices and voids where insects live and breed. Apply uniformly to areas under and behind sinks, refrigerators, stoves and washing machines, around garbage cans, cabinets, shelves, baseboards, door frames, drains, pipes and other sites where insects are seen. Treat crawlspaces and attics at the rate of 16 to 20 ounces per 1,000 square feet.

TREATMENT OF FLEAS, TICKS AND MITES: Remove pets from treatment areas. Thoroughly treat pet beddings, resting areas, sleeping quarters, kennels, carpets, rugs, furniture and other infected areas and their surroundings. Do not treat pets with this product.

TREATING BED BUGS: Take bed apart and apply EverGreen to bed frame, headboards and footboards at the rate of 2 oz. per 50 sq. ft. of surface area. Dust mattresses, cushions and furniture especially on folds, tufts and seams. Pay special attention to cracks and crevices between components, in walls, electrical boxes, appliances, picture frames, jambs, window sills, shelves, cabinets, curtains, blinds and their mounts.

PERIMETER TREATMENTS: Apply to a band of soil measuring 6 to 10 feet wide around and adjacent to structures and around foundations. Apply at the rate of 16 - 24 oz. per 1,000 sq. ft. Treat exterior surfaces to a height of 2 to 3 feet.

CONTROLLING LAWN, LANDSCAPE AND ORNAMENTAL PESTS: Apply EverGreen Dust at the rate of 8 to 24 ounces per 1,000 square feet. Apply uniformly to lawn surface and to areas under shrubs and trees. Wait for the dust to settle before irrigating treated surfaces.

TREATMENT IN LIVESTOCK PREMISES AND DOMESTIC ANIMALS: Cover Apply to indoor and outdoor animal areas at the rate of 16 to 24 oz. per 1,000 square feet. Treat cracks and crevices, structural joints, floors, trusses, rafters, ceilings, gates and other areas harboring pests. Conduct perimeter treatments as stated above. Apply 1 to 2 ounces of dust per animal using appropriate application equipment. Apply to head, neck, shoulders, back and legs. Do not treat more than once every 10 days.

Where to Apply

PyGanic is labeled for use in and around food/feed or non-food/feed areas of agricultural, residential, commercial, food/feed handling and processing plants, industrial and institutional buildings.

InTice Granular Bait Product Label

InTice Granular Bait Material Safety Data Sheet (MSDS)

InTice Granular Bait Catalog

InTice Granular Bait - 1 lb.

Rockwell Labs' InTice Granular Bait is a ready-to-use bait for controlling ants, cockroaches, crickets and other occasional invaders. InTice contains a blend of sweets, oils, protein and Orthoboric acid for maximum acceptance and control. Orthoboric acid is considered to be one of the safest insecticides and is generally safe to use around humans and animals. This active ingredient acts as a stomach poison to insects, blocking enzyme production leading to starvation and death.

Why Should You Use ?

InTice Granular Bait comes in a highly attractive formulation that insects cannot resist.

Directions for Use

FOR OUTDOOR TREATMENTS: Using spreaders, dusters and similar application equipment, uniformly apply InTice to turf sites at the rate of 4 pounds per 1000 square feet. For perimeter treatments, create a band measuring 2 to 4 feet around buildings to prevent infestations. Treat potential insect-harboring sites such as mulch beds, flower beds, wood piles, trees, compost heaps and trash areas. Treat ant trails and mounds with 1/2 to 1 ounces of InTice. The product may be used together with non-repellent insecticides having the active ingredients imidacloprid or fipronil.

FOR INDOOR TREATMENTS: Place bait in areas inaccessible to children and pets. Tamperproof bait stations may be used to prevent children and animals from accessing the bait. Apply InTice at a rate of 6 ounces per 100 square feet using hand held or powered dusters and similar applicators. Apply bait to attics, crawlspaces, under and behind appliances, closets, under sinks, wall voids, cracks and crevices, electrical conduits, around drains and other areas where insects are seen.

This product may be used in the Bait Tray.

Where to Apply

InTice Granular Bait is for use in and around residential, commercial, industrial, municipal, institutional, research, hospitality, agricultural, healthcare and educational buildings. Permitted areas of use also include food handling and food processing establishments, transport vehicles, lawns, ornamental turf, golf courses and parks.

Masterline Bifenthrin 7.9 Product Label

Masterline Bifenthrin 7.9 Material Safety Data Sheet (MSDS)

Masterline Bifenthrin 7.9 Brochure

Masterline Bifenthrin 7.9

Univar's Masterline Bifenthrin Insecticide/Termiticide offers superior control of indoor and outdoor pests such as termites, cockroaches, ants and many more. Its active ingredient, Bifenthrin, is popular for its broad spectrum of control and excellent residual properties. With Masterline's powerful residual formulation, expect effective and lasting control the toughest pest infestations in and around your homes.

Why Should You Use?

Masterline Bifenthrin 7.9 targets several indoor and outdoor pests. This highly versatile product is the solution to all your indoor and outdoor pest problems.

Directions for Use

Masterline Bifenthrin 7.9 is an emulsifiable concentrate intended for water dilutions. Finished solutions can be used for general surface treatments, crack and crevice treatments or spot applications. Finished emulsions may be converted to foam using suitable foaming agents. Insect growth regulators and other pesticides may be tank mixed together with the product unless explicitly prohibited by the product label. Masterline is excellent for use in treating termite infestations. Technicians must be familiar with termite control techniques such as trenching, rodding, sub-slab injection and coarse spray application for effective use of the product. Apply finished emulsions using appropriate equipment such as hand held or powered sprayers, brushes, foam applicators and other similar application equipment. Carefully read the product label for application directions, dilution rates and application rates.

Where to Apply

Masterline controls pests indoors and outdoors on residential, commercial, institutional, public, commercial and industrial buildings. Areas of use also include lawns, ornamental plants, interiorscapes, recreational areas and athletic fields.

Permadust Boric Acid Product Label

Permadust Boric Acid Material Safety Data Sheet (MSDS)

Permadust (Perma dust) Boric Acid Dust

Permadust (Perma Dust) Boric Acid Dust is a long lasting residual. Permadust (Perma Dust) Boric Acid Dust is a boric acid based dust aerosol that is used in cracks and crevices. Please be cautious when using around children and pets. Permadust is even good in food handling facilities for it is not affected by moisture nor heat.

Directions For Use

All residue must be out of reach of children or domestic animals. Avoid contamination of food and foodstuffs. Do not use in aircraft cabins. Before use, shake until agitator ball rattles. For best results, Use in upright position only. Do not spray on plastic, painted or varnished surfaces or directly into any electronic equipment such as radios, televisions, computers, telephones, etc. where the powdery residue may foul or short electric contacts an d circuits.

HOW TO USE WHITMIRE MICRO-GEN CRACK AND CREVICE INJECTION SYSTEM: Use PERMADUST with the supplied actuator and injection tubes. Inject PERMA-DUST into cracks and crevices or void spaces where insects may be harboring, living and breeding. Place injector tip into cracks, crevices, holes and other small openings. Release approximately one second of product. Move injector tip along cracks while treating at the rate of three linear feet per second. For closed voids, calculate the void¤?¤±¤?¤? cubic area and treat at the rate of three to five seconds per three cubic feet. For closed void areas, drill small access holes. Several holes may be required in long-running voids. This product may leave a white residue. This residue can normally be removed with a damp cloth or sponge.

INDOOR TREATMENTS CENTIPEDES, COCKROACHES, CRICKETS, DERMESTIDS, EARWIGS, MILLIPEDES, SCORPIONS, SOWBUGS AND SPIDERS: Inject with the prescribed dosage into cracks and crevices and void spaces where insects may be harboring. These may include, but are not limited to, openings around pipes and sinks, under refrigerators, behind baseboards, washing machines, stoves, cabinets, sewers, floor drains and meter boxes.

BOOKLICE, FIREBRATS AND SILVERFISH: Inject into cracks and crevices associated with baseboards, door frames, bookcases and other harborage sites.

ANTS: Inject cracks, crevices and voids where ants may be traveling and/or harboring, including, but not limited to, around doors, window frames, wall voids and other structural cracks and crevices and void areas.

STORED PRODUCT PESTS (Adult and Larval Stages): Chocolate Moths, Drug Store Beetles, Flour Beetles, Grain Weevils, Indian Meal Moths, Trogodermas: Inject into cracks and crevices and/or voids where these insects may be harboring. Infested areas may include, but are not limited to, cracks and crevices in cabinets, pantries, wall voids and in machinery.

CARPENTER BEES: Locate bee entrance holes. Inject 5-10 seconds of product into entrance holes. Seal entrances after application.

FOOD AREAS - APPLICATION LIMITED TO CRACK AND CREVICE TREATMENT ONLY: Includes areas for receiving, storage, packing (canning, bottling, wrapping, boxing), preparing, edible waste storage and enclosed processing systems (mills, dairies, edible oils, syrups). Serving areas (when food is exposed and facility is in operation) are also considered food areas. Apply directly into cracks and crevices and void areas using injection tube in points between different elements of construction, between equipment and floors, openings leading to voids and hollow spaces in walls, equipment legs and bases where insects hide. Care should be taken to avoid depositing the product onto exposed surfaces or introducing the material into the air. Avoid contamination of food or food processing surfaces.

INDOOR AND OUTDOOR TREATMENTS CARPENTER ANTS: Locate source of infestation or areas of suspected activity. Inject 5-10 seconds of product into insect tunnels and cavities. Treat points of entry or exits from voids such as around doors, windows and siding.

BOXELDER BUGS, CLOVER MITES, CLUSTER FLIES AND ELMLEAF BEETLES: Inject cracks and crevices and/or voids where these insects may be harboring or hibernating. Infested areas may include, but are not limited to, cracks and crevices, behind siding, wall voids, around window and door frames.

OUTDOOR TREATMENTS ANTS, CENTIPEDES, CLOVER MITES, COCKROACHES, CRICKETS, EARWIGS, GROUND BEETLES, MILLIPEDES, PILLBUGS, SCORPIONS, SOWBUGS AND SPIDERS: Treat cracks around doors, windows, under siding and voids at foundation level, beneath guards on loading docks, into cracks in foundations and floors and in other places where these pests may enter building.

Phantom Pressurized Insecticide Product Label

Phantom Pressurized Insecticide Material Safety Data Sheet (MSDS)

Phantom Pressurized Insecticide - 17.5 oz.

Offering the same trusted performance of Phantom Insecticide, Phantom Pressurized Aerosol Spray the active ingredient more efficiently than other residual aerosols. Labeled for indoor general pest control, Phantom kills several pests including pyrethroid-resistant strains of bedbugs and roaches. Phantom works by preventing cells inside an insect's body from generating energy leading to paralysis and death. Phantom's formulation dries in crystals, increasing the life of the active ingredient while leaving no visual residues.

Why Should You Use?

Phantom is the only liquid non-repellent insecticide labeled for general pest control indoors.

Directions for Use

Phantom Pressurized Insecticide is for crack and crevice and/or spot treatments only. Apply the product as directed in the product label. Shake well before use. Press down the spray tip to release the product and apply at the rate of 2 sec/linear feet. Move the can along the length of the treatment area. For closed voids, apply at the rate of 3 sec/cubic feet. For spot treatments, hold the can 12 inches away from the surface to be treated and spray at the maximum rate of 11 sec/2 square feet. Do not exceed 2 square feet per spot. Apply as a spot, void or crack and crevice treatment to insect harboring sites where insects, hide, live, feed and breed. Also treat areas where insects travel, enter or exit structures. Contact insects as much as possible. Treat spaces under and behind cabinets, refrigerators, stoves, sinks, expansion joints, drains, lockers, pipes, in attics, crawlspaces, and vents, around doors, windows, eaves, nests and damaged wood components of structures. Please read the product label for more information.

Where to Apply

Phantom Pressurized Insecticide is labeled for use indoors and outdoors of homes, apartments, meat, poultry, fish, and egg processing and packaging plants, entries and vestibules, offices, food and non-food areas of food handling establishments other than private residences, machine rooms, boiler rooms, garages, storage areas, warehouses and other commercial, residential, institutional and industrial establishments.

Pro Citra DL Product Label

Pro Citra DL Material Safety Data Sheet (MSDS)

Pro Citra DL Botanical Insectcide (Orange Oil) - 17.5 oz.

From Whitmire Micro-Gen's line of all natural insecticides, Pro Citra contact kill aerosol offers the same performance as synthetic insecticides without the toxicity. This natural, broad label product targets several common household insects such as ants, roaches and termites. Its active ingredient is d-Limonene, a botanical insecticide with very low toxicity to humans. This makes the product ideal for use in sensitive accounts such as schools, nursing homes and hospitals.

Why Should You Use?

Pro Citra does not contain synthetic active ingredients that are usually toxic.

ProCitra-DL is a botanical-based insecticide ideal for Crack and Crevice and spot treatment in both food and nonfood handling areas. It controls a wide variety of pests including ants, cockroaches, fleas and spiders and may be used in sensitive accounts such as schools, nursing homes, food processing plants, hospitals and government buildings.

Directions for Use

Pro Citra-DL is intended for crack and crevice and/or spot treatments only in food and non-food handling areas. Use this product with the supplied actuator and injection tubes. Place injector tip into cracks, crevices and voids where insects typically hide. Move injector tip along small openings at the rate of 3 linear feet per second for light infestations and one linear foot per second for heavy infestations. Treat close voids at the rate of one to five seconds per three cubic feet. For spot treatments, hold the container upright and direct the nozzle 12 inches from the surfaces. Treat areas under sinks, around pipes, refrigerators, stoves, washing machines, areas around cabinets, baseboards, floor drains, utility boxes and other infested sites. Contact insects as much as possible. Reapply as necessary. Read the product label for more information.

Where to Apply

Pro Citra Botanical Insecticide is for indoor use in apartments, homes, hotels, hospitals, nursing homes, schools, day care centers, food storage areas, restaurants, food processing plants, supermarkets, utilities, warehouses, modes of transport (buses, trains, trucks, ships), and other commercial, institutional and industrial buildings.

Speckoz Evercide Esfenvalerate EC Product Label

Speckoz Evercide Esfenvalerate EC MSDS

Speckoz Evercide Esfenvalerate EC - 16 oz.

Speckoz Evercide features Esfenvalerate, a synthetic pyrethroid insecticide less toxic and more potent than other pyrethroids. Flexible and highly effective, Speckoz can be diluted in oil or in water, offering the superior residual performance regardless of the diluent. Due to its low toxicity and application rates, the product is labeled for use in food and non-food areas of commercial and industrial structures.

Why Should You Use?

Speckoz Evercide EC can be used in food handling areas. Speckoz can be diluted in water or in oil for extended residual control.

Directions for Use

Depending on the target pest, mix one or two ounces of Speckoz per gallon of water/ oil to produce a solution containing 0.027% and 0.05% active ingredient. Apply as a coarse, wet spray at the rate of 1 gallon per 1,000 square feet of surface area. Insect growth regulators or pyrethroid insecticides may be tank mixed with the product unless prohibited by the product label/s. Do NOT tank mix products with dichlorvos (DDVP).

Treat surfaces where insects are normally found, in baseboards, cabinets and shelves, underneath sinks and equipment, in floors and walls, floor drains, door and window frames, garbage cans, utility installations and other harborage sites. Pay particular attention to cracks, crevices and voids in walls and floors. If necessary drill holes in damaged wooden structures to kill wood destroying insects. Treat outdoor surfaces at the rate of 1 gallon of mixture per 1,000 square feet.

Speckoz may be used as a space spray at the maximum dilution rate of 10 ounces of concentrate per gallon of oil. Apply using mechanical foggers capable of producing aerosol particles less than 30 microns. Before treatment, close all doors and windows in treatment area. Shut off air conditioning units and ventilating systems before proceeding. Direct spray into cracks and crevices, under and behind equipment and appliances, or dark harborage areas before commencing the space treatment. Direct the spray upwards towards the ceiling and corners at the rate of 1 ounce per 1,000 cubic feet of space. Evacuate the treated area and keep the area closed for 30 minutes. Ventilate before occupying.

Where to Apply

Speckoz is for use in food and non-food areas of homes, apartments, schools, warehouses, office buildings, hotels, motels, kennels, food processing and manufacturing plants, food service establishments and transportation equipment.

Product Label

Material Safety Data Sheet (MSDS)

Suspend SC Brochure

Suspend SC - 1 Pint

Suspend SC provides effective knockdown and long term residual control of over fifty pests. Very low usage rates makes the product safe to use in food handling areas, mattresses, furniture, cushions and other surfaces where sensitivity is an issue. Suspend SC residues have no odor or visible residues and will not damage surfaces where water alone causes no damage.

Why Should You Use?

Suspend is more economical, flexible and effective compared to other concentrates.

Directions for Use

Mix Suspend with water following the dilution rates in the product label. Active ingredient concentration in solutions range from 0.01% to 0.06%, depending on the target pest/s. Apply using hand pressurized or power operated sprayers. Shake well before using. Partially fill applicator tanks 1/2 full with water before adding the proper amount of concentrate. Agitate the tank and add the remaining volume of water. Re-agitate to obtain a uniform mixture. The product may be tank mixed with currently registered pesticides and insect growth regulators unless prohibited by the product label. Solutions can be converted to foam used in treating structural voids. Mix Suspend SC with a foaming agent following the mixing instructions as indicated in the foaming agent label.

Use finished solutions for crack and crevice, spot and surface treatments indoors. Use 0.25 to 1.5 ounces of Suspend per gallon of water to treat 1,000 square feet of surface. Apply as a coarse low pressure spray to cracks, crevices, voids and other sites where insect live, feed and breed. Apply as directed in the product label.

Use Suspend SC as a residual or broadcast spray to perimeters, lawns, grounds, landscapes and ornamental plants. Apply as a coarse, low-pressure spray to outdoor building surfaces, porches, patios, eaves, screens, window frames, garbage dumps, lawns and ornamental plants. Treat a band of soil 6 to 10 feet wide around and adjacent to buildings and structures. Treat foundations up to a height of 3 feet.

Control wood-damaging insects by applying spray or foam solutions having 0.06% Deltamethrin. Using the appropriate application equipment, apply solutions to infested surfaces and damaged wooden structures. Inject solutions inside termite carton nests and damaged wood. Drill holes if necessary. Apply as a coarse fan spray to exposed insects and infested surfaces.

For broadcast application in lawns, apply using a minimum of 2 gallons per 1,000 square feet. Use higher volumes for adequate coverage of thick foliage. Apply thoroughly and uniformly over turfgrass and ornamentals.

Where to Apply

Suspend SC is for residential, commercial, industrial and institutional control of the listed pests. Areas of use include apartments, bakeries, bottling facilities, breweries, cafeterias, canneries, food manufacturing and processing plants, food service establishments, granaries, hospitals, hotels, kitchens, laboratories, nursing homes, office buildings, restaurants, schools, warehouses and transports such as aircraft, buses, mobile homes, ships, trailers and trucks.

Product Label

Material Safety Data Sheet (MSDS)

Talstar EZ Granular Insecticide - 25 lbs.

Talstar EZ Granular Insecticide uses a method contact kill method to get rid of pests. The same formula as the Talstar PL, Talstar EZ Granular has bigger granular to make spreading easier. Talstar EZ can be used in residential and recreational areas/ fields, parks and around industrial buildings. To make the spreading easier we recommend that you use a type of handle spreader to get an even spread. Also Talstar EZ work better when the product is wet so watering the area after the product has been spread is a good idea. Talstar EZ Granular does not dissolve in water but it will allow it to go into the ground preventing the pest to come near home entrances or surroundings.

Useful Tips You Should Know:

Product disappears and disperse when wet.

Will not leave stain or residue on concrete.

Safe to use around plants.

Talstar EZ comes in a resealable bag to keep freshness.

For Use in and around: Lawns, Perimeters

Talstar EZ Granular Description:

The power of Talstar in a convenient granular formulation. Talstar EZ granular features a grain technology that allows the particles to disperse and disappear upon wetting without staining concrete or damaging plants. This formulation is easy on the applicator, easy to calibrate and easy to spread. And, Talstar EZ won't leach out of the top-treated zone, meaning longer residual and better insect control.

Put an end to fire ant colonies fast. The Talstar EZ granular program is proven to eliminate dangerous fire ant invaders within 24 hours, allowing you to give customers their yard back when they want it. For quick and reliable colony control and long-term protection against reinfestation of invading fire ants, combine treatment with an application of Talstar Professional insecticide.

LAWN AND PERIMETER APPLICATIONS

Lawn Application: Broadcast Talstar EZ granular insecticide with suitable application equipment to ensure uniform coverage over the treatment area.

Talstar PL Granular Product Label

Talstar PL Granular Material Safety Data Sheet (MSDS)

Talstar PL Granular Insecticide - 25 lbs.

Talstar PL Granular is different from Talstar EZ it has an unique sand core granular structure. It is a lot finer then the EZ. Talstar PL release its chemical through out time as it rains. Talstar PL can be used to treat not only residential but commercial and recreation centers as well. Once the Talstar PL is inside soil it will protect by killing the pest as well as preventing pest problems. For lawn areas the application of the Talstar PL can last 2- 3 mos. One recommendation is to use a form of handle spreader to evenly spread the granular.

Useful Tips You Should Know: Do not exceed 0.2lb of Talstar PL per acre in residential use, and 0.4lb of Talstar PL per acre in commercial use.

Avoid using in commercial greenhouses or areas where grass is grown for seeds. Safe around non targeted animals.

General Information of Talstar PL Granular Insecticide Talstar PL granular has a sand core granular structure that penetrates mulch with no odor and no watering needed. It's heavy and dust-free so it won't drift off target. And it remains on the soil surface so it's effective even after irrigation or rainfall. Labeled for a broad spectrum of perimeter pests, Talstar PL granular controls everything from fleas, ticks and flies to mosquitoes, mites and millipedes. Talstar PL granular provides two to four months of effective, long-term residual protection. Low application rates make it an excellent, cost-effective choice for building and foundation perimeters. Put an end to fire ant colonies fast. The Talstar PL granular program is proven to eliminate dangerous fire ant invaders within 24 hours. For quick and reliable colony control and long-term protection against reinfestation of invading fire ants, combine a mound treatment with a broadcast application of Talstar PL granular.

To ensure optimum control, irrigate the treated area with up to 0.1 inches of water immediately after application to activate (release from the granule) the insecticide.

Tempo SC Ultra Product Label

Tempo SC Ultra Material Safety Data Sheet (MSDS)

Tempo SC Ultra - 8 oz.

Tempo SC Ultra is an odor less and stainless product. Tempo SC is concentrated formula that is mixed with water before using. Tempo SC Ultra is used both indoors and outdoors. One bottle of Tempo Ultra makes up to 30 gallons. When using this product we recommend that you use a pest control product tool such as Chapin Premier 1 or 2 Gallon sprayer.

Application with Tempo SC Ultra

Apply where pests have been seen or found, or can find shelter (in and around buildings and structures, on residental, commercial and recreational areas of turf, on ornamentals in landscapes and interior plantscapes). Makes up to 30 gallons of finished spay solution for indoors. Treats up to 30,000 sq ft. outdoors. Mix the appropriate amount of Tempo SC with water. May tank mix with other pesticides currently registered for similar uses. Reapply every 7 to 10 days, if needed. For turf, reapply if needed, but not more than 6 times per year.

Product Label

Material Safety Data Sheet (MSDS)

Tempo Ultra WP - 420 grams

Tempo Ultra WP has a fast knockdown kill, meaning the minute they come in contact with the insecticide they will die. Tempo Ultra WP will leave no to almost no residue when sprayed and odorless. Tempo Ultra WP will last up to 30 days, continuously killing pests. Tempo Ultra WP can be used indoors and outdoors as well as food handling facilities.

General Household Pests: Ants (except Pharaoh), Bedbugs, Carpet Beetles, Centipedes, Clothes moths, cluster fly, Cockroaches, Crickets, Darling beetles, Earwigs, Firebrats, Millipedes, Pillbugs, Silverfish, Sowbugs, Spiders, Flies, Gnats, Hornets, Midges, Moths, Wasps, Yellow Jackets

FOR USE IN:

Areas where pest have been seen or found, or can find shelter. In and around buildings and structures. One residential, commercial and recreational areas if turf. On ornamentals in landscapes and interior plant scapes.

Mixing Direction for Tempo Ultra WP:

Mix the appropriate amount of Tempo Ultra WP with water. May use tank mix with other pesticides currently registered for similar uses, unless specifically prohibited. Use in general surface spot, mist, or crack and Crevice application. Re-apply every 7 to 10 days, in needed. Make sure to cover or remove all food processing and handling equipment before treatment.

Temprid SC Product Label

Temprid SC Material Safety Data Sheet (MSDS)

Temprid SC Supplemental Lable

Temprid SC Insecticide - 400ml

Temprid SC (Suspension Concentrate Formulation) insecticide is an easy-to-use and provides quick knockdown and long residual control of more than 50 pests by combining the broad spectrum, fast-acting control of beta-cyfluthrin with the systemic residual control of imidacloprid to provide premium performance and effecacy.

Tempirid SC's Advantages:

Delivers unsurpassed ant control.
Also eliminates aphids, scale and mealy bugs that produce honeydew, a preferred food source of many ant species.
The only perimeter pest control product you will ever need
Broad spectrum insecticide - controls perimeter pests that some competitive products don't.
Flexible label.
Can be applied outdoors and indoors.
Can be applied as a perimeter application 3 ft up and 10 ft out from the structure.
Better pest stopping power than non-repellents.

Product Label

Material Safety Data Sheet

Tengard SFR One - 1 Quart

Tengard SFR One's active ingredient has the ability to kill over 75 different types of pest. The permethrin in Tengard SFR One has a long lasting and increases effective. Tengard SFR One can be used indoors and outdoors, when used outdoors it dispersed in the soil and establish a barrier between the structure and the termites in the soil. Tengard SFR One is a pesticide that kill pest but also as a prevention.

Mix the termiticide use dilution in the following manner:

1. Fill tank 1/4 to 1/3 full.
2. Start pump to begin by-pass agitation and place end of treating tool in tank to allow circulation through hose.
3. Add appropriate amount of Tengard SFR. (See Rate/Volume Conversion Chart)
4. Add remaining amount of water.

Application Volume: To provide maximum control and protection against termite infestation apply the specified volume of the finished water emulsion and active ingredient as set forth in the directions for use section of this label. If soil will not accept the labeled application volume, the volume may be reduced provided there is a corresponding increase in concentration so that the amount of active ingredient applied to the soil remains the same.

NOTE: Large reductions of application volume reduce the ability to obtain a continuous barrier. Variance is allowed when volume and concentration are consistent with label directed rates and a continuous barrier can still be achieved.

Product Label

Material Safety Data Sheet (MSDS)

Evercide Total Release Fogger (or V clean-out )

Speckoz Evercide Total Release Fogger (or V clean-out ) is mainly used in residential areas. The larger the area it is recommended you use more. For bad pest problems it is recommended to use the V Clean Out Fogger due to the fact that the pesticide come out in a fog like bombs and can travel through vents and inside walls to treat even the infested areas not shown to the eye. Please note to evacuate the facilitie while Evercide Total Release Fogger (or V clean-out ) is active for at least 3 hours.

FOR USE IN AND AROUND: Apartments, Cabins, Campers, Closed Porches, Condominiums, Dormitories, Garages, Homes, Kennels, and the Non-Food/Feed areas of Drive-ins, Drugstores, Factories, Food Plants, Hospitals, Hotels, Kitchens, Nursing Homes, Office Buildings, Railroad Cars, Rest Rooms, Schools, Ships, Storage Areas, Supermarkets, Theaters, Trailers, Trucks, Warehouses, and Zoos.

DO NOT use in small, enclosed spaces such as closets, cabinets or under counters or tables.

Do not use in a room 5 ft. X 5 ft. or smaller; instead allow fog to enter from other rooms.

Turn off ALL ignition sources such as pilot lights (shut off gas valves), other open flames or running electrical appliances that cycle off and on. (i.e. refrigerators, thermostats, etc.) Call your gas utility or management company if you need assistance with your pilot lights.

Cover exposed foods, dishes and food handling equipment. Open cabinets and doors to area to be treated.

Shut off fans and air conditioners. Close doors and windows.

Point valve opening away from face and eyes when releasing.

Use one unit for each 6,000 cubic feet of unobstructed area.

Do not remain in area during treatment and ventilate thoroughly before re-entry.

Do not use this unit in a cabinet or under counter or table. Do not use this unit in an area less than 100 cubic feet.

To Operate Valve: Place several layers of newspaper or pad on stand or table in the center of the room. To lock valve in open position for automatic discharge, press valve button all the way down, hooking catch. Then place fogger on the stand or table. Leave building at once and keep building closed for two hours before airing out. Open all doors and windows and allow to air for one-half hour. Repeat spraying in two weeks or when necessary.

To Kill Fleas and Ticks: Destroy pet's old bedding and replace. Use product as above. Treat dogs and cats with a registered tick control product prior to re-entry.

Bifen IT Product Label /

Bifen IT Material Safety Data Sheet (MSDS)

Bifen IT - 1 Quart

Bifen I/T (Insecticide/Termiticide) is one of the most potent insecticides in the market. With 7.9% Bifenthrin, the product is highly effective in controlling a wide variety of pest insects, including various species of subterranean termites. Bifen I/T is specially formulated to control termite and insect infestations around commercial, residential and industrial structures.

Why Should You Use BIFEN I/T ?

Bifen I/T contains high concentrations of Bifenthrin to control and prevent termite and insect infestations. In addition, the product leaves a long-lasting residual effect that last for months.

Directions for Bifen IT Use

Applying Bifen I/T requires the use of suitable application equipment and personal protective equipment. The product is extremely toxic. Please refer to the product label before using or handling the product. Please read the product label for information on treatments, dilutions and application methods. Depending on the target pest and the method of application, Bifen I/T should be applied using the correct methods as stated in the product label. The product can be used for broadcast treatments, perimeter treatments, crack and crevice applications, sub-slab injections and residual barrier treatments. For subterranean termite control, methods may be employed such as trenching, rodding, crack and crevice injection or absorption for effective control.

Bifen I/T can also be used to control Armyworms, Cutworms, Sod Webworms, Annual Bluegrass Weevils, Billbugs, Black Turfgrass Ataenius, Leafhoppers, Mealybugs, Ants, Centipedes, Chinch Bugs, Fleas , Imported Fire Ants, Millipedes, Mole Crickets, Ticks, Pillbugs, Sowbugs and European Crane Flies. Please read the product label for directions and mixing instructions.

Where to Apply Bifen IT

Use Bifen I/T to treat infested areas in and around residential, commercial, public and industrial buildings. The product is for use in lawns, parks, recreational areas and athletic fields.

Demon WP Product Label

Demon WP Material Safety Data Sheet (MSDS)

DEMON WP Insecticide - 1 Envelope

Syngenta's Demon WP is an odorless, water-soluble insecticide that delivers quick knockdown and lasting residual control of over 30 pests. The product contains 40% Cypermethrin, one of the most reliable pyrethroids to control indoor and outdoor pest infestations. Demon WP is available in convenient 1-lb jars with scoops and in envelopes which greatly reduces the efforts of mixing. One pound of the product makes up to 50 gallons of finished solution.

Why Should You Use DEMON WP?

Demon WP is a broad label insecticide providing fast kill and long-term residual control at a lesser cost.

Directions for DEMON WP Use

Demon WP is in the form of soluble powder that is intended for water dilutions. Following the dilution rates found in the product label, add measured amounts of Demon WP to water to produce the desired amount of solution. Compatible pesticides may be mixed together with the product unless prohibited by the product label. Use the finished solutions for surface treatments, crack and crevice treatments or spot applications. Apply solutions using handheld or powered sprayers, crack and crevice injectors or paint brushes.

Permitted areas of use in nonfood/nonfeed areas include, but are not limited to: aircraft (cargo and non-cabin areas only), apartment buildings, boiler rooms, buses, closets, correctional facilities, decks, entries, factories, fencing, floor drains (that lead to sewers), food granaries, food grain mills, food manufacturing, processing and serving establishments; furniture, garages, garbage rooms, greenhouses (non-commercial), hospitals (non-patient areas), hotels and motels, houses, industrial buildings, laboratories, livestock/poultry housing, landscape vegetation, locker rooms, machine rooms, mausoleums, mobile homes, mop closets, mulch, nursing homes, offices, patios, pet kennels,porches, railcars, restaurants, storage rooms, schools, sewers (dry), stores, trailers, trees, trucks, utility passages, vessels, vestibules, warehouses, wineries, and yards.

Repeat treatments as necessary, but not more than once every 7 days.

Where to Apply DEMON WP

For use by commercial applicators in, on and around buildings and structures for the control of listed pests, including on lawns, ornamental trees and shrubs around residential, institutional, public, commercial, agricultural and industrial buildings; and parks, recreational areas and athletic fields.

Demon WP may be used as a general surface, crack and crevice and/or spot treatment in the non-food areas of food handling establishments. Examples of non-food areas include garbage rooms, lavatories, floor drains (to sewers), entries and vestibules, offices, locker rooms, machine rooms, boiler rooms, garages, mop closets, and storage (after canning or bottling).

Do not use Demon WP in food areas of food handling establishments, restaurants or other areas where food is commercially prepared, processed or served. Food areas include areas for receiving, storage, packing (canning, bottling, wrapping, boxing), preparing, edible waste storage and enclosed processing systems (mills, dairies, edible oils, syrups). Serving areas (when food is exposed and facility is in operation) also would be considered a food area.

Catchmaster Mouse & Insect Glue Trap (72MB)

For safe and effective control of insects and mice, use Catchmaster's Mouse & Insect Glue Traps. These glue boards can also be used to monitor the presence of pests indoors or outdoors. With high-grade adhesives pre-baited with peanut butter scent, these traps attract a wide variety of insects such as cockroaches, flies, moths and small rodents. Catchmaster Glue Traps are ideal substitutes to toxic bait traps and snap traps that are dangerous to children and pets.

Why Should You Use Catchmaster Mouse & Insect Glue Trap?

Using high-grade adhesives, Catchmaster Glue Traps remain effective for up to one year! The product does not contain pesticides and mechanisms that may harm children and pets.

Directions for Catchmaster Mouse & Insect Glue Trap Use

Carefully lift the protective film covering the adhesive surface. Place one trap per room. Place traps away from children and pets. Fold along the perforations to protect the glue and bait from contamination or to reduce the glue board size. In case of contact, remove with vegetable oil. Monitor pest infestations using the printed table behind the glue board.

Where to Apply Catchmaster Mouse & Insect Glue Trap

Catchmaster Mouse and Insect Trap is for in and around commercial, residential and industrial buildings and structures.

TRAPPER MONITOR & INSECT TRAP Material Safety Data Sheet (MSDS)

Trapper Monitoring Trap Instruction

Trapper Monitor & Insect Trap

TRAPPER MONITOR & INSECT TRAP is a non-poisonous glue trap that captures and monitors insects. PCOs can use it to accurately determine the location, insect species and severity of insect infestations.

The sturdy 7 inch x 3 inch cardboard trap can be used undivided as a large trap or separated along perforated lines into three smaller traps.

Its adhesive backing sticks to nearly any surface. There is space to record date and location of use.

TRAPPER MONITOR can utilize Bell is new TRAPPER Roach Attractant Tablets. These non-poisonous tablets attract roaches to each glue pad. Tablets are sold separately.

Talstar Pro Product Label

Talstar Pro Material Safety Data Sheet (MSDS)

Talstar Pro (formerly Talstar One) - 1 pint

Talstar Pro formerly known as Talstar One's name means one professional product for all control. Talstar Pro is able to target over 75 different pests and is great for in and outdoor uses. Talstar Pro is a long lasting residual that lasts up to 3 months, it is odorless, leaves a clear residual, leaves no stain, non- irritating on the skin and does not break down easily with rain. Talstar Pro is also well known for its effectiveness with termites. With Talstar Professional insecticide you know you'll get the job done right every time. That's because it gives you superior, long-lasting control of the toughest general pests and termites. In fact, Talstar is effective on more than 75 pests. Plus, it's approved for multiple use-sites, so you can use it almost anywhere - indoors, outdoors, industrial, commercial and food-handling areas.

Proven, flexible protection indoors. Talstar Professional is an effective insecticide that's tough on ants and general household pests. In fact, its multi-use label makes it so versatile, you can trust it to provide effective indoor control of bed bugs, fleas, flies, scorpions, spiders and cockroaches almost anywhere, including: industrial and commercial sites, kitchens, restaurants, supermarkets and food processing plants.

Reliable, long-lasting protection outdoors. For outside and perimeter jobs, Talstar Professional is labeled for a broad spectrum of perimeter pests and provides long-lasting residual control of everything from fleas, ticks and flies to mosquitoes, mites, millipedes and termites.

Plus, it's non-staining and contains no odorous or plant-damaging solvents. Once it dries, it is virtually impossible to tell where it has been sprayed. Even better, it leaves no unsightly residues and causes no known phytotoxicity.

Put an end to fire ant colonies fast. Talstar Professional can even be used to destroy fire ant colonies. Simply drench the mound for 95% control in 24 hours, and then apply a broadcast application to eliminate re-infestation of invading fire ants for up to six months.

To control Bees, Wasp, Hornets, and Yellow-Jackets apply a 0.06% emulsion. Application should be made in the late evening when insects are at rest. Spray liberally into hiding and breeding places, especially under attic rafters, contacting as many insects as possible. Retreatment may be necessary to achieve and/or maintain control during periods of high pest pressure. Repeat application is necessary only if there are signs of renewed insect activity. Important: Do not apply emulsion until location of heat pipes, ducts, water and sewer lines and electrical conduits are known and identified. Caution must be taken to avoid puncturing and injection into these structural elements. Do not apply into electrical fixtures, switches, or sockets.
In the home, all food processing surfaces and utensils in the treatment area should be covered during treatment or thoroughly washed before re-use. Remove pets, birds, and cover aquariums before spraying. Do not permit humans or pets to contact treated surfaces

Talstar Pro formerly known as Talstar One's name means one professional product for all control. Talstar Pro is able to target over 75 different pests and is great for in and outdoor uses. Talstar Pro is a long lasting residual that lasts up to 3 months, it is odorless, leaves a clear residual, leaves no stain, non- irritating on the skin and does not break down easily with rain. Talstar Pro is also well known for its effectiveness with termites. With Talstar Professional insecticide you know you'll get the job done right every time. That's because it gives you superior, long-lasting control of the toughest general pests and termites. In fact, Talstar is effective on more than 75 pests. Plus, it's approved for multiple use-sites, so you can use it almost anywhere - indoors, outdoors, industrial, commercial and food-handling areas.

Material Safety Data Sheet (MSDS)

Topia Insecticide Aerosol-17 oz.

Many homeowners are requesting lower-impact solutions to their pest problems. FMC Professional Solutions created Topia™insecticide to give PMPs an effective, naturally-derived tool to help them address their customers' concerns.

Topia is the first completely organic aerosol product from FMC, utilizing the powerful plant extract Geraniol to eliminate pests through contact. This water-based aerosol has low odor and low persistence in the environment, making it an ecologically-friendly alternative to other insecticides. As a 25B exempt product, Topia insecticide requires no federal registration.

Discover how offering the low-impact pest control of Topia can make a big impression on your eco-minded customers.

Evergreen Pyrethrins Material Safety Data Sheet (MSDS)

Evergreen Pyrethrins (PyGanic PRO) - 1 pint

Evergreen Pyrethrins is a broad spectrum insecticide for use in both certified organic production and situations where a botanical insecticide fits the needs of the customer.

Advantages of Evergreen Pyrethrins Insecticide

Delivers fast, effective control of insects including Ants, Cockroaches, and Stored Product Pests.
Contains pyrethrum - a botanical insecticide derived from a chrysanthemum flower.
Food and Non-Food Areas of Food Handling Processing facilities.
For use in Certified organic barns, dairies, and poultry houses.

LambdaStar 9.7% CS Material Safety Data Sheet (MSDS)

LambdaStar 9.7% CS Info Sheet

LambdaStar 9.7% CS

LambdaStar 9.7% CS - LambdaStar 9.7% CS is a microencapsulated lambda-cyhalothrin in an easy to mix formulation which utilizes EcoCap technology. Instead of using petroleum like other microcaps, Eco Caps are made with renewable vegetable oil. Eliminating petroleum allows the product to avoid California Prop 65 regulations. Independent lab tests demonstrate efficacy on a wide range of pests. The product may be used indoors, including food areas, and outdoors including structural, turf and ornamental, and livestock housing sites. This is a green formulation containing the active ingredient lambdacyhalothrin.

Alpine Dust Product Label /

Alpine Dust Material Safety Data Sheet (MSDS)

How to Applying Dust Insecticide

Alpine Dust Insecticide - 8 oz.

Alpine Dust Insecticide is a direct contact insecticide in powder form. Like other Alpine products, the dust insecticide contains the non-repellent insecticide Dinotefuran. Alpine Dust Insecticide is tested and proven to control ants, cockroaches, bed bugs, beetles, fleas, moths, spiders, flies, wasps, millipedes and centipedes.

Why Should You Use Alpine Dust ?

Alpine Dust Insecticide provides a quick knockdown to a wide range of controllable pests. An 8 oz bottle of the product covers approximately 500 square feet.

Directions for Alpine Dust Use

Product can be applied by hand or by the use of dusters and other similar equipment to ensure uniform applications. Spread the product evenly on to infested areas following the recommended application rates found in the product label. Apply 0.15 to 0.30 oz. of the product per square yard of surface area.

Do not apply the product to surfaces where food is processed such as kitchen tables and sinks.

Do not treat pets or pet beddings with the product. Replace beddings after treating the area.

Please read the product label for application instructions and the recommended application rates. Pestmall offers Centrobulb Dusters and Bellow Dusters needed to apply Alpine Dust Insecticides.

Where to Apply Alpine Dust

Alpine Dust Insecticide is for use in and around residential, commercial and industrial buildings. Apply thoroughly and evenly to infested areas, cracks and crevices, nests, voids, corners, under sinks and shelves, storage areas and other places where insects congregate, nest and hide.

For perimeter applications, sprinkle the product around insect entry holes such as structural cracks and crevices, window sills, patios, porches and other areas where insects have access to the building.

Fireback Bed Bug & Insect Spray Product Label & MSDS

Nisus Fireback Bed Bug & Insect Spray

Nisus Fireback is a powerful contact kill and flushing insecticide with Pyrethrins. This aerosol spray provides a 3-month residual protection effective against common house insects such as bedbugs. Fireback has a water-based formulation that is odor-free and non-staining to surfaces and fabrics. With Smart Can Technology, each can of Fireback includes a fan spray, pin stream, any angle spray and cap holder for easy application.

Why Should You Use?

Fireback is a broad label insecticide that kills pests on contact and leaves a 90-day residual to prevent infestations.

Directions for Use

Shake well before using. Hold the container upright and spray to surfaces from a distance of 12 to 15 inches. Spray into infected areas and hiding places such as cracks and crevices, voids, baseboards, under and behind sinks, cabinets, baseboards, floors, around drains and plumbing, floors, carpets, mattresses and furniture. Spray directly to insects if possible. Use as a surface spray by treating areas at the rate of 20 seconds per 1,000 cubic feet. Leave room and keep the area closed for 15 minutes. Ventilate before occupying. Repeat treatments as necessary. Carefully read the product label for specific use directions.

Where to Apply

Nisus Fireback is for residential and commercial use. Do not use the product in food handling establishments or areas where food is prepared or processed.

Fireback Spider & Scorpion Jet Spray Product Label & MSDS

Fireback Spider & Scorpion Jet Spray - 17 oz.

Fireback Spider & Scorpion Jet Spray has a Broad Spectrum Insecticide Highly Effective Against Ants, Centipedes, Cockroaches, Crickets, Firebrats, Millipedes, Moths, Pillbugs, Scorpions, Silverfish, Sowbugs, Spiders, Wasps, and Other Pests with up to 3 months long residual effect.

Advantages of Fireback Spider & Scorpion Jet Spray

- Unique tip allows both spray and jet stream application
- For residential/commercial use
- May be used in Non-Food/Food areas of food/feed processing plants
- Controls residential insects
- Kills on contact
- Seeks out bugs where they hide
- Non-staining
- Low odor
- Water-based formula
- Protects for up to 3 months

Please refer to and follow the instructions on the Fireback spray label.

FenvaStar EcoCap Product Label

FenvaStar EcoCap Material Safety Data Sheet (MSDS)

FenvaStar EcoCap - 8oz.

Fenvastar EcoCap is a microencapsulated suspension concentrate containing 0.3 pounds active ingredient per gallon.

Fenvastar EcoCap is designed to provide long residual activity against pests listed on this label when applied as surface or spot treatments or as a crack and crevice spray in and around residential and commercial structures, as well as on turf and landscaping. Fenvastar EcoCap may be sprayed on any surface that will not be stained by water. DO NOT use this product as a fogger or apply it as a space spray. Do not apply in electrical conduits, junction and switch boxes, motor housings, or other electrical equipment due to shock hazard from water-based spray.

Fenvastar EcoCap should be mixed with water and applied with hand pressurized or power operated sprayers. Shake container of Fenvastar EcoCap before diluting. Clean spray equipment before use. For dilution, add approximately half the required water to spray tank and then add the appropriate amount of Fenvastar EcoCap. Agitate and slowly add the remaining water. Agitate spray thoroughly before using and also occasionally during use to ensure dispersion.

Apply as a course, wet spray to surfaces where these pests are normally found. Treat floors, baseboards, around doors and windows, in attics, crawl spaces, eaves, corners, closets, walls, utility pipes, storage areas, and all cracks and crevices. Treat underneath sinks, dishwashers, refrigerators, stoves, the underside of shelves, drawers, cabinets, areas behind pipes, and in all places where these insects shelter. Contact as many insects as possible with direct spray. Repeat applications as needed, but do not exceed more than one (1) application every seven (7) days.

Please refer to and follow the instructions on the Product label.