• Product Detail
• Question and Answer
• Customer feedback

Product Label / Material Saftety Data Sheet (MSDS)

Talpirid Kill Moles Bait

TALPIRID's active ingredient capitalizes on a mole's physiology. In both field and laboratory tests, TALPIRID achieved outstanding acceptance and control. One worm contains a lethal dose and can kill in 24 hours. TALPIRID's size, shape and feel let moles consume the bait in the same manner as its primary food source, the earthworm. Special enhancers ensure immediate attraction and excellent product acceptance. TALPIRID comes in a convenient tray of 10 worms which release freely from the tray, ready for immediate placement. Trays are individually sealed in a bag for ultimate freshness and maximum shelf life.

Active Ingredient: - Bromethalin - 0.025%

Size: 1 Box / 20 Worms

Target Pests: Moles

Not for Sale To: NC, AK, HI, NY

Description:

SUBSURFACE RUNWAYS: TALPIRID has been specially designed to mimic the natural food sources of the mole. To achieve maximum effect, TALPIRID should only be placed in areas used habitually by moles for feeding.

ESTABLISHING INITIAL ACTIVITY: Use your finger, small wooden dowel or a narrow rod to puncture a hole in the top of subsurface runways. Be careful not to crush runways. Mark opened runways and revisit them 48 to 72 hours later. Runways that have had holes resealed within 72 hours should be baited.

BAITING ACTIVE RUNWAYS: Make a hole in the top of the runway with a rod slightly larger than the diameter of the bait. Drop one worm into the runway, using the rod to push any exposed bait completely into the runway. Carefully reseal the runway with a small amount of dirt to exclude light. Repeat bait application every 5 to 10 feet of each active subsurface runway.

DETERMINING BAITING RESULTS: Five (5) to 7 days after bait application, check for mole activity using the same procedure for determining initial activity. Return 48 to 72 hours later and
retreat all active runs.

MAIN UNDERGROUND TUNNELS AND CONNICAL MOUNDS: Moles construct deeper tunnels that are not visible from the surface. These deep tunnels systems are often marked by a series of conical mounds (piles of dirt) 4 to 12 inches high formed when dirt is pushed to the surface when moles construct these tunnels. To locate deep tunnels, push a probe, such as a broom handle, into the soil between mounds. When the probe enters a tunnel, the resistance on the probe will decrease rapidly. Mark opened tunnels and revisit them 48 to 72 hours later. Runways that have had holes resealed within 72 hours should be baited. To bait deep tunnels, drop one TALPIRID worm through the probe hole, using the probe to push the bait completely into the tunnel. Cover the hole with a piece of sod, a small rock or a piece of newspaper to allow for visual inspection. Repeat bait application every 5 to 10 feet of each active deep tunnel and within 5 feet of each active conical mound. Check for the effects of treatment 5 to 7 days after bait application using the same procedure for determining tunnel location. Return 48 to 72 hours later and retreat all active tunnel systems.

Please refer to and follow the information on the Talpirid Mole Bait label

Do You Have a Question about this Product? Ask Our Experts!